Within the living area of the colony, what atmospheric gases must be present on Venus?

The value of the charge on each particle is [tex]1.05 x 10^-8 C[/tex].

Coulomb's law is a fundamental principle of electrostatics that describes the interaction between electric charges. It states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. We can use Coulomb's law to solve this problem. Mathematically,

[tex]F = k(q1q2)/r^2[/tex]

where F is the force of attraction or repulsion between the two charged particles,[tex]q1[/tex] and [tex]q2[/tex] are the magnitudes of the charges on the two particles, r is the distance between them, and k is Coulomb's constant, which has a value of [tex]9.0 x 10^9 Nm^2/C^2.[/tex]

In this problem, we know that the charges are equal and the distance between them is 10.0 cm. We also know that the force between them is 0.5 N. Therefore,

[tex]0.5 N = k(q^2)/(0.1 m)^2[/tex]

Solving for q, we get:

[tex]q = \sqrt{[(0.5 N)(0.1 m)^2/k]}[/tex]

[tex]q = \sqrt{(0.5 N)(0.01 m)/(9.0 x 10^9 Nm^2/C^2)}[/tex]

[tex]q = 1.05 x 10^-8 C[/tex]

Therefore, the value of the charge on each particle is [tex]1.05 x 10^-8 C.[/tex]

Learn more about electrostatics here:

https://brainly.com/question/31042490

#SPJ1

The top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.

The principle of hydrostatics, also known as Pascal's principle, states that when an external pressure is applied to a fluid in a container, that pressure is transmitted uniformly in all directions within the fluid, regardless of the shape or volume of the container. In other words, the pressure applied to a confined fluid will be distributed evenly throughout the fluid and will not change in magnitude at any point within the fluid. This principle is important in a number of applications, such as hydraulic systems, which use fluids to transmit force and pressure from one point to another. It is also used to explain how liquids exert pressure on the walls of their container and how objects can float or sink in fluids.

We can use the principles of hydrostatics to solve this problem. Let's call the height difference between the two water surfaces h. We can assume that the oil completely covers the water on one side of the tube and does not mix with it, so the oil and water form two separate liquid columns with a common interface. Let's call the height difference between the oil and water surfaces on the same side of the tube H.

The pressure at any given point in a fluid depends only on the depth of that point below the surface of the fluid and the density of the fluid. Since the two water columns are at the same height, they experience the same pressure from the atmosphere. Similarly, the two oil columns experience the same pressure from the atmosphere.

Now consider a point on the interface between the oil and water on the same side of the tube. This point is at a depth of h+H below the water surface on the other side of the tube, so the pressure at this point is greater than atmospheric pressure by an amount equal to the product of the density of water, the acceleration due to gravity, and the total depth (h+H):

P = Patm + ρwatergh

where P is the pressure at the interface, Patm is atmospheric pressure, ρwater is the density of water, g is the acceleration due to gravity, and h+H is the total depth.

Similarly, the pressure at this point is less than atmospheric pressure by an amount equal to the product of the density of oil, the acceleration due to gravity, and the depth of the oil column (H):

P = Patm - ρoilgH

Since the interface between the oil and water is at the same pressure, we can equate these two expressions for P:

Patm + ρwatergh = Patm - ρoilgH

Solving for H, we get:

H = h(ρwater/ρoil)

Substituting the given values, we get:

H = 0.6h

Therefore, the top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.

To know more about pressure visit:

https://brainly.com/question/20816077

#SPJ1

Protons, neutrons, and electrons are the three main subatomic particles that make up atoms.

An oxygen atom has 8 protons, 8 electrons, and its number of neutrons may vary depending on the isotope of oxygen. The more frequently encountered isotope of oxygen is oxygen-16, with 8 neutrons.

The element with 13 protons is aluminum (Al). To find the mass number, we add the number of protons and neutrons in the nucleus. Therefore, the mass number of this aluminum isotope would be 13 + 14 = 27.

If an atom has 7 electrons, it must be nitrogen (N), which has an atomic number of 7.

Number of neutrons = Mass number - Atomic number

Thus, we obtain the number of neutrons by the equation: 14 - 7 = 7

Learn more about elements in the periodic table here:

https://brainly.com/question/14347616

#SPJ1

table tennis ball: 0.07 density of the table tennis ball

golf ball: 1.37 density of the golf ball

Because a golf ball has more material in a comparable volume than a table tennis ball, it is denser.

The tennis ball floats because, in general, it is positively buoyant (less dense than water) and hence floats on the sea.

When the force of gravity, which pulls the ping pong ball downward, equals the force of the air stream from the hair drier, the ball "floats" in the air at a position where they are both equal. (which is pushing the ping pong ball up). Bernoulli's Principle is what is meant by this.

learn more about Bernoulli's Principle

https://brainly.com/question/13344039

#SPJ1

The temperature of the electric fire element is 18.3 K

We use the formula at:

P = σAT^4

where P=  power radiated,

A = surface area of the black body,

σ =Stefan-Boltzmann constant (5.67 × 10^-8 W/m^2K^4),

T = temperature in Kelvin.

P = 1500 W

The surface area of a cylinder is gotten by:

A = 2πrh + 2πr^2

A = 2π(0.04 m)(0.3 m) + 2π(0.04 m)^2

A = 0.0902 m^2

Substituting the values into the Stefan-Boltzmann law, we have:

1500 W = (5.67 × 10^-8 W/m^2K^4)(0.0902 m^2)T^4

T^4 = 4196.9

T = 18.3 K

Learn more about surface area at: https://brainly.com/question/951562

#SPJ1

The two risk factors that can affect the ability of a child to learn in school is poor parenting and malnutrition.

A risk factor can be defined as any predisposing factor that can expose an individual to harm.

A risk factor that affects a child is an aspect of the child or environment that increases the probability of poor outcomes.

The two risk factors that can affect the ability of a child to learn in school include the following:

Learn more about nutrition here:

https://brainly.com/question/29512118

#SPJ1

Answer:

[tex]80\; {\rm m\cdot s^{-1}}[/tex].

Explanation:

The frequency [tex]f[/tex] of a wave is the number of cycles completed in unit time ([tex]1\; {\rm s}[/tex] in this example.) In this question, [tex]f = 40\; {\rm s^{-1}}[/tex] ([tex]1\; {\rm Hz} = 1\; {\rm s^{-1}}[/tex]) means that the wave would complete [tex]40[/tex] cycles in every [tex]1\; {\rm s}[/tex].

The wavelength [tex]\lambda[/tex] of a wave is the distance the wave travels in each cycle. It is given that [tex]\lambda = 2\; {\rm m}[/tex].

The goal is to find the wave speed, which is the distance that this wave travels in unit time ([tex]1\; {\rm s}[/tex].)

In this question, it is given that [tex]\lambda = 2\; {\rm m}[/tex] and [tex]f = 40\; {\rm s^{-1}}[/tex]. Thus, this wave would travel a total of [tex]40\, (2\; {\rm m}) = 80\; {\rm m}[/tex] for the [tex]40[/tex] cycles completed in each unit time of [tex]1\; {\rm s}[/tex] ([tex]\lambda = 2\; {\rm m}[/tex] for each cycle.) The speed of this wave would be [tex]80\; {\rm m\cdot s^{-1}}[/tex].

Formally, the speed [tex]v[/tex] of this wave can be found by multiplying the wavelength [tex]\lambda[/tex] of this wave by its frequency [tex]f[/tex]:

[tex]\begin{aligned}v &= \lambda\, f \\ &= (2\; {\rm m})\, (40\; {\rm s^{-1}) \\ &= 80\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

The mass of Brachiosaurus moves with a momentum of 134,054 kgm/s  and the velocity is 3.9 m/s, which is 34.37 kg.

The momentum is the product of mass and velocity. The momentum is the vector quantity and the unit of momentum is Kgm/s.

Momentum = mass × velocity

 mass    = momentum/velocity

momentum =  134,052 kgm / s

velocity = 3.9 m/s

mass = 134052 / 3.9

         = 34.37 kg

Thus, the mass of Brachiosaurus is 34.37 kg.

To learn more about Momentum :

https://brainly.com/question/30677308

#SPJ1

A cesium-133 atom's radiation goes through 1.5 million cycles in around 0.1633 microseconds (or 163.3 nanoseconds).

9,192,631,770 hertz (cycles per second) is the frequency of the microwave spectral line that the isotope cesium-133 emits. The basic unit of time is provided by this. Cesium clocks have an accuracy and stability of 1 second in 1.4 million years.

The radiation emitted by cesium-133 has a frequency of 9,192,631,770 cycles per second, or 9.192631770 109 Hz.

The following formula may be used to determine how long 1.5 million radiation cycles take to complete:

Time is equal to the frequency of cycles.

Plugging in the numbers, we get:

time = 1.5 million / 9.192631770 × 10^9 Hz

time = 1.632995101 × 10^-7 seconds

So it takes approximately 0.1633 microseconds (or 163.3 nanoseconds) for radiation from a cesium-133 atom to complete 1.5 million cycles.

To know more about cesium-133 visit:-

https://brainly.com/question/4830355

#SPJ1

15. The observations that supported the geocentric models of the solar system and the phenomena described in the table have some similarities and differences. One similarity is that they all involve objects in the sky that are visible to the eye. The observations that supported the geocentric models involved the apparent motion of the planets, the sun, and the moon across the sky, as well as the phases of Venus and the moons of Jupiter.

The solar system refers to the collection of planets, moons, asteroids, comets, and other celestial bodies that orbit around a central star, which is the Sun. It includes eight planets: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, and their respective moons, as well as  planets such as Pluto, and countless other objects that orbit the Sun.

16. If a small, bright object appeared in the sky, moved along with a nearby constellation, and then disappeared a year later, it most likely occurred within our solar system, possibly in the asteroid belt between Mars and Jupiter or in the Kuiper Belt beyond Neptune. This is because objects that are outside of our solar system would not move with the background constellations over the course of a year, due to their great distance from Earth.

Learn more about solar system on https://brainly.com/question/2564537

#SPJ1

a. We can actually see here that the girl have kinetic energy which is respect to the escalator.

b. The kinetic energy does not depend on the chosen reference.

Kinetic energy is a form of energy that an object possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its current velocity. Kinetic energy is a scalar quantity, meaning it only has magnitude and no direction. The formula for calculating kinetic energy is:

KE = 1/2 × m × v²

Where KE is the kinetic energy, m is the mass of the object, and v is its velocity.

The concept of kinetic energy was first introduced by the French mathematician Gaspard-Gustave de Coriolis in 1829. It was later developed by other scientists such as James Prescott Joule and Hermann von Helmholtz.

Learn more about kinetic energy on https://brainly.com/question/8101588

#SPJ1

a.) The evidence for planets orbiting the Sun might be :

b.  Evidence for potentially habitable planets might come in the form of

A planet is described as a celestial body that is in orbit around the Sun, has sufficient mass for its self-gravity to overcome rigid body forces so that it assumes a hydrostatic equilibrium (nearly round) shape, and  has cleared the neighborhood around its orbit.

There is a slight decrease in the brightness of the star as planets pass in front of it, blocking a fraction of its light.

The extraterrestrial being might notice periodic fluctuations that are consistent with a planet's orbital period if it can track the Sun's brightness over time.

Learn more about planets at: https://brainly.com/question/28430876

#SPJ1

In my opinion, it is crucial to address high unemployment rates in order to support the overall health and well-being of the community.

LeIn 2010, the city of Detroit had one of the highest unemployment rates in the country, with an official rate of 27.8%. This means that almost one-third of the city's workforce was unemployed and actively seeking work. The unemployment rate is calculated by dividing the number of unemployed people by the total number of people in the labor force, which includes those who are employed and those who are actively seeking employment.

However, the official unemployment rate does not take into account those who have given up looking for work or those who are underemployed (working part-time or in jobs that do not match their skill level). This is where alternative measures of unemployment come into play. The Bureau of Labor Statistics (BLS) calculates different measures of unemployment, including U-4, U-5, and U-6, which take into account these additional factors. In Detroit, the U-6 rate was estimated to be around 45% in 2010, which paints a more accurate picture of the true unemployment situation in the city.

High levels of unemployment have a significant impact on the economy, both locally and nationally. When people are unemployed, they have less money to spend, which leads to reduced demand for goods and services. This can in turn lead to business closures, job losses, and a further decline in the economy. Additionally, the government must spend more on social welfare programs to support those who are unemployed, which can strain the budget.

According to the Detroit News, the high unemployment rate in Detroit was linked to a decline in population and an increase in poverty rates. The Huffington Post reported that high unemployment rates can also lead to increased crime rates and lower high school completion rates. This is because unemployed individuals may turn to crime as a means of survival, and children of unemployed parents may struggle to stay in school due to financial pressures.

Learn more about unemployment:https://brainly.com/question/14227610

#SPJ1

The relationship between a sound wave's intensity and pressure amplitude (also known as pressure variation p) is. I is equal to (p) 2 2 v w, where is the thickness of the substance that the sound is contained in.

Describe a sound wave.

Hence, a sound wave is made up of periodically occurring compressions and compression and rarefaction, or areas of high and low pressure, that are travelling at a specific pace. In other words, it consists of a regular (i.e., oscillating or vibrating) change in pressure that takes place around the optimum pressure that is present at a specific time and location.

A sound wave is created by a speaker in what way?

A speaker creates a sound by vibrating a cone, which causes air molecules to vibrate. A speaker in Figure 17.2. 2 vibrates with a consistent frequency and amplitude, causing motions in the molecules of the surrounding air. The speaker transfers power to the air as it vibrates back and forth, primarily as thermal energy.

To know more about sound wave visit:

https://brainly.com/question/11797560

#SPJ1

The force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).  

The hydraulic lift works based on Pascal's principle, which states that the pressure applied to a confined fluid is transmitted equally in all directions throughout the fluid.

Assuming there is no loss of energy due to friction or other factors, the force exerted on the small piston will be equal to the force exerted on the large piston. This can be expressed as:

F1/A1 = F2/A2

where F1 is the force exerted on the large piston, A1 is the area of the large piston, F2 is the force exerted on the small piston (which we want to find), and A2 is the area of the small piston.

We can rearrange this equation to solve for F2:

F2 = (F1/A1) x A2

Given that the area of the large piston is 100 cm², we can calculate the force exerted on the large piston by using the weight of the car and the gravitational acceleration:

F1 = m x g = 1800 kg x 9.81 m/s² = 17,658 N

Substituting the values into the equation, we get:

F2 = (17,658 N / 100 cm2) x 15 cm² = 2,649 N

Therefore, the force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).

To know more about Pascal's principles, visit:

https://brainly.com/question/30258629

#SPJ1

part a.  the wavelength of this wave  is 26 cm

part b. The amplitude (A) of a wave is 9 cm

The wavelength (λ) of a wave is described as the distance between two consecutive points on the wave that are in phase.

In this scenario, the distance between two corresponding points on the wave will be equal to the horizontal distance from crest to trough, which is 26 cm.

Hence, the wavelength of the wave is: λ = 26 cm

The amplitude (A) of a wave is described as the maximum displacement of a particle from its rest position as the wave passes through it.

In this scenario, the vertical distance from crest to trough is 18 cm, which is equal to twice the amplitude.

Learn  more about  amplitude at:

https://brainly.com/question/3613222

#SPJ1

According to the question the length of the river span of the bridge in meters is 853.3232 m.

Length is a physical quantity that measures the distance between two points. It is one of the fundamental units in the International System of Units (SI). It is usually measured in meters, although it can also be measured in other units such as centimeters, kilometers, feet, yards, miles, and so on.

The length of the river span of the bridge is 2799.0 ft. To convert this length to meters, we need to use a conversion factor. There are 0.3048 meters in one foot, so the conversion factor we will use is 1 ft
= 0.3048 m.

To convert 2799.0 ft to meters, we multiply by the conversion factor:
2799.0 ft * 0.3048 m/ft
= 853.3232 m

Therefore, the length of the river span of the bridge in meters is 853.3232 m.

To learn more about  Length

https://brainly.com/question/20599103

#SPJ1

Aproximately 1.09 m/s was the locust's first speed.

In engineering mechanics, vectors are used to express values with both a magnitude and a direction. For analysis, vector representations of a variety of engineering quantities—including forces, displacements, velocities, and accelerations—are required.

Δy = vsin(θ)t - 0.5gt²

0 = v*sin(55°)t - 0.5(-9.81 m/s²)*t²

t = 2vsin(55°)/g

Now, we can use the horizontal motion of the locust to find the initial velocity v. The horizontal distance traveled by the locust is given by:

Δx = v*cos(55°)*t

Substituting the expression for t that we just found:

0.750 m = vcos(55°)2vsin(55°)/g

Solving for v:

v = √(0.750 mg/(2sin(55°)*cos(55°)))

v ≈ 1.09 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

Answer:

✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿

To solve this problem, we can use the formula for heat transfer:

q = mcΔT

where q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the change in temperature.

We know that the mass of the block is 0.35 kg and that its initial temperature is -27.5 ºC. We also know that the mass of water is 0.217 kg and that its initial temperature is 25.0 ºC.

When they come to equilibrium at 16.4 ºC, we can calculate how much heat was transferred from the water to the block:

q = mcΔT q = (0.217 kg)(4186 J/kg ºC)(25.0 ºC - 16.4 ºC) q = 1825 J

This amount of heat was transferred from the water to the block, so we can set it equal to the amount of heat absorbed by the block:

q = mcΔT 1825 J = (0.35 kg)c(16.4 ºC - (-27.5 ºC)) 1825 J = (0.35 kg)c(43.9 ºC) c = 148 J/kg ºC

Therefore, the specific heat capacity of the block is 148 J/kg ºC.

Explanation:

(´▽`ʃ♡ƪ)

✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿

The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).

A wave crest is the highest point of a wave. It is the top of the wave, where the wave is moving most up and away from the equilibrium position. It is the point of highest amplitude (height) of the wave and is followed by a wave trough, which is the lowest point of the wave.

The speed of the waves can be calculated using the formula speed = distance over time.

We know the distance between wave crests is 9.0 m and the time it takes for 12 waves to pass the boat is 45 s. Therefore, the speed of the waves can be calculated as:

Speed = 9.0 m / 45 s

Speed = 0.2 m/s

The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).

This calculation shows that the speed of the waves passing the boat is 0.2 m/s. This speed can be further broken down into how many meters the waves travel in one second if necessary.

For more questions related to speed

https://brainly.com/question/13943409

#SPJ1

The researcher did not find strong evidence to support the idea that job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.

It sounds like the researcher conducted an experiment to investigate whether job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.

Based on the information provided, the researcher found that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level.

The factors that play an important role in the hiring process for a job:

(1) Qualifications and experience: Employers typically look for candidates who possess the necessary qualifications and experience for the job. This includes education, training, certifications, and work experience.

(2) Skills and abilities: Employers also consider a candidate's skills and abilities related to the job. These may include technical, interpersonal, communication, and problem-solving skills.

(3) Personal characteristics: Personal characteristics, such as motivation, work ethic, and adaptability, can also play a role in the hiring process. Employers may look for candidates who demonstrate a positive attitude, a willingness to learn, and the ability to work well with others.

(4) Fit with company culture: Companies may also consider whether a candidate fits with their company culture, values, and mission. This can include factors such as teamwork, creativity, and innovation.

Learn more about evaluations here:

https://brainly.com/question/20067491

#SPJ1

The time takes the kid to remain in the air is 0.735 s.

Time is the duration of an events. The s.i unit of time is seconds.

To calculate how long the kid will be in the air, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the time is 0.735 s.

Learn more about time here: https://brainly.com/question/10428039

#SPJ1

Two or greater sources are said to be coherent if they emit waves that have the identical wavelength (or frequency) and amplitude and which maintain a steady phase difference.

If two sources have the identical wavelength, frequency, and segment difference, they are said to be coherent. Therefore, we can conclude that coherent sources have the identical wavelength.

Two microwave coherent factor sources emitting waves of wavelenths λare positioned at 5λdistance apart. The interference is being observed on a flat non-reflecting surface alongside a line passing through on sources ,in a course perpendicular to the line joining the two sources

Learn more about coherent waves here:

When the temperature of the combination hits 0°C, 20g of ice remains unmelted. The quantity of ice added to the water was approximately (Specific heat of water =4.2J/gC)

Specific heat of ice =2.1J/gC,

Heat of fusion of water at 0C=334J/g.

ΔT=Tfinal−Tinitial=40.6°C−173°C=−132.4°C

Thermal equilibrium is reached when two bodies come into thermal contact with each other, allowing heat transfer (i.e., the transfer of energy through heat) to occur. Thermal equilibrium cannot be achieved if two systems cannot freely exchange energy.

Thermal equilibrium happens after a length of time when the engine temperature equals the air temperature.

learn more about Thermal equilibrium

https://brainly.com/question/14556352

#SPJ1

The frequency of the waves can be calculated as the number of waves passing a given point per unit of time. In this case, the frequency is:

f = (number of waves) / (time)

f = 12 waves / 45 s

f = 0.267 Hz

The wavelength is the distance between two adjacent wave crests, which is given as 9.0 m in the problem.

The speed of the wave can be calculated using the formula:

v = f × λ

where v is the wave speed, f is the frequency, and λ is the wavelength.

Substituting the values given, we get:

v = 0.267 Hz × 9.0 m

v = 2.40 m/s

Therefore, the speed of the waves is 2.40 m/s (to two significant figures).

Learn more about wave from

https://brainly.com/question/23739080

#SPJ1

Mice that ate sunflower seeds gained an average of 2.1 grams that Raphael can determine from his experiment. Each group is given a different type of feed.

Grams (g) is a unit of measurement for mass in the International System of Units (SI). It is the base unit of mass in the SI, and is defined as being equal to the mass of a physical prototype, which is kept at the International Bureau of Weights and Measures. In practical terms, 1 gram is equal to 0.0352739619 ounces, or 0.00220462262 pounds. Grams are often used to measure the weight of food, medicines, and other small objects.

To learn more about grams

https://brainly.com/question/30337264

#SPJ1

Answer:

A) P.E = 138.44 J

B) The velocity of swing at bottom, v = 3.33 m/s

C) The work done, W = -138.44 J

Explanation:

Given,

The mass of the child, m = 25 Kg

The length of the swing rope, L = 2.2 m

The angle of the swing to the vertical position, ∅ = 42°

A) The potential energy at the initial position ∅ = 42° is given by the relation

                               P.E = mgh joule

Considering h  = 0 for the vertical position

The h at ∅ = 42° is  h = L (1 - cos∅)

                              P.E = mgL (1 - cos∅)

Substituting the given values in the above equation

                              P.E = 25 x 9.8 x 2.2 (1 - cos42°)

                                     = 138.44 J

The potential energy for the child just as she is released, compared to the potential energy at the bottom of the swing is, P.E = 138.44 J

B) The velocity of the swing at the bottom.

At bottom of the swing the P.E is completely transformed into the K.E

                 ∴                 K.E = P.E

                                    1/2 mv² = 138.44

                                    1/2 x 25 x v² 138.44

                                           v² = 11.0752

                                            v = 3.33 m/s

The velocity of the swing at the bottom is, v = 3.33 m/s

C) The work done by the tension in the rope from initial position to the bottom

            Tension on string, T = Force acting on the swing, F

                           =

                           = - 2.2 x 25 x 9.8 [cos0 - cos 42°]

                           = - 138.44 J

The negative sign in the in energy is that the work done is towards the gravitational force of attraction.

The work done by the tension in the ropes as the child swings from the initial position to the bottom of the swing, W = - 138.44 J