wooden block floats in water, and a steel object is attached to the bottom of the block by a string as in figure -oq14.3. if the block remains floating, which of the follow-statements are valid? (choose all correct statements.) the buoyant force on the steel object is equal to its *eight. (b) the buoyant force on the block is equal to its weight. (c) the tension in the string is equal to the weight eithe steel object. (d) the tension in the string is less than weight of the steel object. (e) the buoyant force on the ehckis equal to the volume of water it displaces.

Answers

Answer 1

The buoyant force on the steel object is equal to its weight. The tension in the string is less than weight of the steel object. The buoyant force on the ehckis equal to the volume of water it displaces.

What is meant by weight?

A force is weight. The Newton is the metric unit of force, and it moves at a speed of 1 metre per second2.The gravitational force that pulls a body toward the earth or another celestial body; it is equal to the mass multiplied by the local gravitational acceleration.Weight is the gravitational force that pulls objects toward the centre of the Earth. The resulting force that pulls a mass toward Earth is known as gravity. In contrast to gravitational force, which occurs between any two masses, this only occurs between Earth and a mass.Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object.

To learn more about weight refer to

https://brainly.com/question/86444

#SPJ4


Related Questions

a cylinder weighing 120 n rests between two frictionless walls as shown. the wall reaction in newton at point a is most nearly

Answers

The wall reaction at point A in newton is most nearly calculated to be equal to 60 N.

What is wall reaction?

Wall reaction means that when you push on a wall, the wall pushes back on you with force equal in strength to the force you exerted.

Cylinder is in a state of static equilibrium, which means that net force and net torque acting on it are both zero. Force exerted by the wall at point A is equal in magnitude but opposite in direction to force exerted by the cylinder on wall at point A. Since the cylinder is not accelerating, net force acting on it is zero.

Since the force exerted by the wall at point A is equal in magnitude but opposite in direction to the weight of the cylinder, we say that the wall reaction at point A = 1/2 * weight of cylinder = 1/2 * 120 N = 60 N.

To know more about reaction force, refer

https://brainly.com/question/14360695

#SPJ4

if the cart moves along the track at a constant speed, what are the cart's velocity and acceleration vectors at points a, b, and c? start your vectors at the corresponding black dots. the orientation of your vectors will be graded. the exact length of your vectors will not be graded.

Answers

Since the cart moves along the track at a constant speed, its velocity vector at points a, b, and c will have the same magnitude and direction.

The velocity vector can be represented as an arrow pointing in the direction of motion with the magnitude being the speed of the cart.

The acceleration vector at points a, b, and c will be zero since the cart is moving at a constant speed. The acceleration vector can be represented as a zero vector or a vector of length 0 with no direction.

So, the velocity and acceleration vectors at points a, b, and c can be represented as:

Point a:

Velocity vector: constant magnitude and directionAcceleration vector: zero vector

Point b:

Velocity vector: constant magnitude and directionAcceleration vector: zero vector

Point c:

Velocity vector: constant magnitude and directionAcceleration vector: zero vector

Learn more about velocity here:

https://brainly.com/question/25905661

#SPJ4

Dependent, immature children who frequently misbehave were most likely raised by _____ parents.

(a) authoritarian

(b) authoritative

(c) generative

(d) overly permissive.

Answers

Answer: d

Btw if you get it wrong, sry.. :(

I think its d because overly permissive means that you give people freedom and if a parent gives their kid freedom they would be very dependent and immature. (freedom as in the parent dosen't care what the kid does and gives into the kid.)

As CJ k ad l ad my G My h KD h KD h my SJ KD zhh MD

Answers

Cause: According to this law, the skateboard requires an external source of force to move, which the skateboarder indirectly provides.

Effect: On the pavement, the skateboarder reverses forward (that is he applies a force on the road in a direction opposite the direction of intended motion).

What connection exists between a cart's mass and its acceleration after the spring is let go?

The acceleration of the cart is inversely proportional to its mass. As a result, the acceleration of the cart will decrease as its mass increases.

The mass and acceleration are inversely correlated: the acceleration decreases as mass increases.

Newton's second law states that force and acceleration are directly proportional to one another, so if a cart's mass is held constant while the force acting on it increases, the cart will accelerate. When an object moves, it has kinetic energy, which it then expends.

To learn more about acceleration refer to;

brainly.com/question/460763

#SPJ1

Which of the following determines the earth's temperature?
Answers:
A. Carbon dioxide in the atmosphere
B. Energy output of the sun
C. All of these are correct.
D. Distance from the sun

Answers

The greatest option is C because all of them are correct. The planet's temperature is affected by the sun's energy output, the amount of carbon dioxide in the atmosphere, and its distance from the earth.

The atmosphere of Earth is the layer of gases with high speed, collectively known as air, that envelops the planet and gives it its planetary atmosphere. The Earth's atmosphere keeps life on the planet safe by maintaining the pressure necessary for liquid water to exist on the surface. The distance between any two places in space is equal to the length of the straight line connecting them, which is also the shortest path. This is the usual conception of distance in classical physics, especially in Newtonian mechanics.

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

follow the example below to write and equation and sketch a graphical model of energy in each situation

Answers

The Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) and for soccer at maximum height E(high) = KE(high) + PE(max).

For a pendulum, at the lowest point, all the potential energy is converted into kinetic energy and the pendulum motion reaches its maximum velocity. Ignored air resistance. Therefore, no heat energy is generated. This means that all potential energy is converted into kinetic energy. Taking drag into account, the final energy is the sum of thermal energy and kinetic energy, so the sum of the two equals the potential energy of the tip.

E(total low) = PE(low) + KE(low) + ThE(low)

PE(low) = 0

so, E(total low) = KE(Low) + ThE(low) = PE(high)

For a soccer ball, the ball has a horizontal velocity component at its highest point and reaches a certain height. The top speed is slower than the initial speed. The total energy at the tip is therefore equal to the sum of the kinetic and potential energies. As in the previous case, the thermal energy is missing because we ignored the resistor.

E(high) = KE(high) + PE(max)

Therefore, the Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) = PE(high) and for soccer at maximum height E(high) = KE(high) + PE(max).

To learn more about total energy:

https://brainly.com/question/15576394

#SPJ4

The complete question is:

follow the example below (the figure attached) to write an equation and sketch a graphical model of energy in each situation. Write down the expanded total energy equation in the case of the pendulum at tje low position and for the soccer ball at its maximum height. Also, make the pie chart diagram of different forms of energy (PE, KE, and ThE).

evaluate the numerical value of the final momentum of the t-shirt using the results from parts a and b. view available hint(s)

Answers

The final momentum of the t-shirt can be evaluated by multiplying the mass of the t-shirt (from part a) by its final velocity (from part b). Final momentum = (1.0 kg) x (20.0 m/s) = 20 kg m/s.

What is final momentum?

Final momentum is the momentum of an object after it has been acted upon by an external force. It is calculated by taking the initial momentum of an object and adding or subtracting the force of the external force to determine the final momentum. The final momentum is equal to the initial momentum plus the change in momentum caused by the external force. Final momentum can be calculated using the equation pfinal = pinitial + FΔt, where pfinal is the final momentum, pinitial is the initial momentum, F is the force of the external force, and Δt is the change in time caused by the force.

To learn more about final momentum
https://brainly.com/question/26485142
#SPJ4

two identical springs are attached to two different masses, ma and mb , where ma is greater than mb . the masses lie on a frictionless surface. both springs are compressed the same distance, d , as shown in the figure. which of the following statements descibes the energy required to compress spring a and spring b?

Answers

The amount of energy required to compress spring A and spring B would be the same.

What is energy?

Energy is the capacity to do work. It is the ability to cause change and is found in many forms, including chemical, electrical, mechanical, nuclear, radiant, and thermal energy. It is often referred to as the "lifeblood" of our modern society, as it is necessary for everything from powering homes and businesses, to providing energy for transportation and communication.

This is because the springs are identical and the amount of compression (d) is the same. The masses of the objects don't affect the energy required to compress the springs since the objects are lying on a frictionless surface and will not resist the springs being compressed.

To learn more about energy
https://brainly.com/question/2003548
#SPJ4

find the magnitude of the electric field, in newtons per coulomb, at the center of the triangular configuration of charges, given that qa

Answers

4.33×103 N/C, 35.0∘ below the positive x-axis if qa=+2.50 nC, qb=−8.00 nC, and qc=+1.50 nC are the charges on all the three vertexes of an equilateral Triangle.

As we know the electric field at a point due to a charged particle is E = F/q where f is the force and q is the charge. If the orientation of charges is the same as shown in the image attached then

E = KQq/[tex]r^{2}[/tex]q  where k = 8.99 × 10 9 N ⋅ m 2 /C 2.

where Q is charged  particle and q is another charge so

E = 8.99 × 10 9*2.50*8.00 /3/4r*2.5

which results in

4.33*10^3 N/C

that is the net electric field at the center of the Triangle with charges on all the vertexes.

Learn More about Electric Field: https://brainly.com/question/14372859

#SPJ4

if the vessel has a pinhole-sized leak, which of the following will be true regarding the relative values of the partial pressures of the gases remaining in the vessel after some of the gas mixture has effused?

Answers

The option that will be true regarding the relative values of the partial pressures of the gases remaining in the vessel after some of the gas mixture has effused is;

A) Pressure He < Pressure Ne < Pressure Ar

What is pressure?

Pressure is defined as the force applied perpendicular to an object's surface per unit area across which that force is dispersed. Gauge pressure is the pressure in relation to the surrounding atmosphere. Pressure is expressed using a variety of units. Pressure is the force acting on a unit area of a surface. It works perpendicular to the surface under pressure. Pressure = force multiplied by the area on which it operates. Pressure is defined as the amount of force exerted perpendicular to an object's surface per unit area, and the symbol for it is p. (or P). The pascal is the SI unit of pressure (Pa).

Here,

The option that will be true in terms of the relative partial pressures of the gases remaining in the vessel after some of the gas mixture has been effused is;

A) Pressure He < Pressure Ne < Pressure Ar

To know more about pressure,

https://brainly.com/question/12824418

#SPJ4

Using an ohmmeter, a student measures the resistance between various points on his body. He finds that the resistance between two points on the same finger is about the same as the resistance between two points on opposite hands—both are several hundred thousand ohms. Furthermore, the resistance decreases when more skin is brought into contact with the probes of the ohmmeter. Finally, there is a dramatic drop in resistance (to a few thousand ohms) when the skin is wet. Explain these observations and their implications regarding skin and internal resistance of the human bo

Answers

The resistance between two points on the same finger is likely due to the resistance of the skin and the small amount of muscle and fat that is present in the finger.

What is the cause of resistance between two points on opposite hands?

The resistance between two points on opposite hands is likely due to the resistance of the skin and the larger amount of muscle and fat that is present in the hand. The resistance decreases when more skin is brought into contact with the probes of the ohmmeter because more skin in contact means more surface area for the current to flow through, thus reducing the resistance. The dramatic drop in resistance when the skin is wet is likely due to the fact that water is a better conductor than dry skin. This observation suggests that the resistance of the human body is largely due to the resistance of the skin, and that the internal resistance of the body (i.e., the resistance of muscles, bones, etc.) is relatively low in comparison.

To know more about conductor, visit:

https://brainly.com/question/18084972

#SPJ4

Small spheres of diameter 1.05 mm fall through 20.0°C water with a terminal speed of 2.34 cm/s. Use 1.00 x 10-3 §a for the viscosity of water. Calculate the density of the spheres.

Answers

The density of the spheres is 1.004 gm/cm³.

What is terminal velocity?

The maximum velocity attained by an object as it falls through a fluid is known as terminal velocity.

It occurs when the sum of the drag and buoyancy forces acting on the object equals the downward force of gravity. Because the object's net force is zero, it has no acceleration.

The  terminal speed = 2.34 cm/s.

The viscosity of water =  1.00 × 10⁻³ CGS unit.

Terminal velocity: v =  (2/9)(σ − ρ)gr²/η.

σ = 9vη/{2gr²} + ρ

= (9 × 2.34 × 1.00 × 10⁻³)/(2×980×(0.105/2)²) + 1

= 1.004 gm/cm³

Hence, The density of the spheres is 1.004 gm/cm³.

Learn more about terminal velocity here:

https://brainly.com/question/2654450

#SPJ1

T/F deciding that a process that fills bottles with soda is functioning properly by checking the weights for a sample of bottles is an example of inferential statistics.

Answers

Inferential statistics is used to determine whether a process that fills bottles with soda is working properly by weighing a sample of bottles, so the given statement is true.

What is Inferential statistics?Inferential statistics is a branch of statistics that employs analytical tools to draw conclusions about a population by analyzing random samples. Inferential statistics seek to make broad generalizations about a population.Descriptive statistics are statistics that summarize the characteristics of a data set. Inferential statistics allow you to test a hypothesis or determine whether your data can be generalized to a larger population.Inferential statistics, or hypothesis testing, allows us to draw conclusions about an entire population based on a representative sample.Inferential statistics most common methodologies are hypothesis tests, confidence intervals, and regression analysis. Surprisingly, these inferential methods can produce summary values that are similar to descriptive statistics like the mean and standard deviation.

To learn more about Inferential statistics refer to :

https://brainly.com/question/18499755

#SPJ4

A cheetah is running at 40 m/s and catches his prey at 12 m/s. The chase took 30s. What is the
acceleration?

Answers

Formula for acceleration:

[tex]a=\dfrac{Vf-Vi}{t}[/tex]

acceleration(measured in m/s^2) = Final velocity(measured in m/s) - Initial velocity(measured in m/s) / time(measured in seconds)

__________________________________________________________

Given:

[tex]Vi=40m/s[/tex]

[tex]Vf=12m/s[/tex]

[tex]t=30s[/tex]

[tex]a=?[/tex]

__________________________________________________________

Finding acceleration:

[tex]a=\dfrac{Vf-Vi}{t}[/tex]

[tex]a=\dfrac{12-40}{30}[/tex]

__________________________________________________________

Answer:

[tex]\fbox{a = -0.93 m/s squared}[/tex]

in the collision theory of kinetics, which of the following is required to have a successful collision? select all that apply. i. three or more species must collide simultaneously. ii. a collision of the appropriate orientation must occur. iii. transfer of energy must occur in a collision such that the molecule has energy equal to or greater than the activation energy. iv. the temperature of the sample must be greater than 298k. v. formation of products.

Answers

The following is required to have a successful collision: ii. A collision of the appropriate orientation must occur,  iii. Transfer of energy must occur in a collision such that the molecule has energy equal to or greater than the activation energy, v. Formation of products.

What is collision?

Collision is when two objects come in contact with one another and experience a force as a result. This force can be a direct result of the objects hitting each other, or it can be the result of the objects exerting a force on one another in order to move away. In either case, the objects experience a momentary change in their respective velocities.

To learn more about collision
https://brainly.com/question/29549592
#SPJ4

Help me pleaseee!!
Would appreciate ^^
**BRAINLIST, thanks and
points***

The battery has an internal resistance of 2.50
4.1 Show that the resistance of the 6.2 V, 4.5 W lamp at its working potential difference
(pd) is about 9.

Look at photo for more info
4.2 The terminal pd across the battery is 6.2 V.
Calculate the emf of the battery.

rope
Pulleys P and M are frictionless so that the tension in the rope attached to A is equal to the weight of A
A weighs 35 N and the weight of moveable pulley M is negligible.

Calculate the tension in the horizontal cable C when the gate is closed.
tension
3.3 Pulley M is pulled to the left as the gate is opened.
10/36
Explain why this increases the tension in the horizontal cable C.

Answers

The resistance of working potential difference of the 6.2 V, 4.5 W lamp is 8.54 ohm. When terminal pd across the battery is 6.2 V, the emf of the battery is 8.01 V.

What is resistance?

The opposition that a substance provides to the flow of electric current is referred to as resistance. The uppercase letter R represents it. The ohm is the standard unit of resistance, which is sometimes written as a word and sometimes represented by the uppercase Greek letter omega. Resistance is a measure of an electrical circuit's resistance to current flow. Resistance is measured in ohms, which is represented by the Greek letter omega ().

Here,

r=2.5 ohm

V= 6.2 volts

P=4.5 watt

P=V²/R

R=V²/P

R=6.2*6.2/4.5

R=8.54 ohm that is about 9 ohm.

I=V/R

I=0.726 A

EMF=V+Ir

=6.2+0.726*2.5

=6.20+1.81

=8.01 volts

The resistance of the 6.2 V, 4.5 W lamp at its working potential difference is 8.54 ohm. The emf of the battery when terminal pd across the battery is 6.2 V is 8.01 V.

To know more about resistance,

brainly.com/question/13258713

#SPJ1

When a metal surface is illuminated with light of wavelength 437 nm, the stopping potential for photoelectrons is 1.67 V. (c = 3.00 × 108 m/s, h = 6.626 × 10-34 J ∙ s, e = -1.60 × 10-19 C, 1 eV = 1.60 × 10-19 J, mel = 9.11 × 10-31 kg)
(a) What is the work function of the metal, in eV?
(b) What is the maximum speed of the ejected electrons?

Answers

(a) Work function of the metal is 2.74 eV. (b)  maximum speed of the ejected electrons is 1.15 x 10^6 m/s (1.15 million m/s)

What is work function?

The work function is the minimum energy required to remove an electron from the surface of a metal.

AS, Work function (Φ) = hν - eV0

(V0) is stopping potential  and  (ν) is the frequency of the incident light

Given, wavelength of the incident light is 437 nm,

ν = c / λ = 3.00 x 108 m/s / 437 x 10-9 m = 6.87 x 1014 Hz

Hence, Φ = hν - eV0 = 6.626 x 10-34 J ∙ s * 6.87 x 1014 Hz - 1.60 x 10-19 C * 1.67 V = 4.36 x 10-19 J = 2.74 eV

So the work function of the metal is 2.74 eV.

(b) Maximum speed of the ejected electrons can be calculated using the formula: Vmax = √(2eV0/mel)

Vmax is the maximum speed of the ejected electrons, e is charge of an electron, V0 is stopping potential and mel is mass of the electron.

Vmax = √(2 * -1.60 x 10^-19 C * 1.67 V / 9.11 x 10^-31 kg) = 1.15 x 10^6 m/s

So, the maximum speed of the ejected electrons is 1.15 x 10^6 m/s (1.15 million m/s)

To know more about work function, refer

https://brainly.com/question/19427469

#SPJ4

in the circuits shown, the brightness of the bulbs is observed to compare as follows: a is the brightest, and b and c are equally bright and dimmer than A (A>B=C)
Why is bulb A brighter than bulb B or C?
Because the voltage is greater across A than across B or C
Because the current is greater through A than through B or C
Because the circuit containing bulb A has less overall resistance
Because there is more curren from the battery in the circuit containing bulb A Because bulbs B and C only get half the current from the battery, while A gets all of it

Answers

The reason bulb A is brighter than bulbs B and C is because it has a higher voltage and a lower resistance than either of them.

What is lower resistance?

Lower resistance is the measure of how easily an electrical current can flow through an object or circuit. It refers to how much opposition a material presents to the flow of an electric current. The lower the resistance of a material, the easier it is for an electric current to flow through it, and the higher its conductivity.

This is because the circuit containing bulb A has the least overall resistance, meaning more current is able to flow through it and it is able to operate at a higher voltage. This means that the current is able to provide more energy to the bulb, causing it to be brighter than bulbs B and C.

To learn more about lower resistance
https://brainly.com/question/15035357
#SPJ4

factoring in everything we currently know about the history of the universe, our best estimate for the age of the universe is [ select ] . additionally, some scientists speculate that our universe is not the only universe that exists, but the only one we can gather evidence about. this idea is called [ select ] .

Answers

Factoring in everything we currently know about the history of the universe, our best estimate for the age of the universe is 13.8 billion years old. additionally, some scientists speculate that our universe is not the only universe that exists, but the only one we can gather evidence about. this idea is called Multiverse Theory .

The multiverse theory is the idea that there may be multiple universes existing in parallel to our own, with their own laws of physics, laws of nature, and potentially different versions of ourselves. The multiverse theory has been proposed by many scientists.

To learn more about Universe

brainly.com/question/9724831

#SPJ4

Below is an outline of Louis Pasteur's swan-neck flask experiment. What can you conclude from his results? Alr escapes from open end of flask. Microorganisms from air settie in bend. 88=-= Years Hours days 1 Broth storized air escapes Broth allowed to cool slowly- air enters 5 Broth stays store Indefinitely Bacteria multiply in broth 4 Flask tiled so that the sterile broth comes in contact with micro- organisms from air. Spontaneous generation is incorrect Only life can beget life Microbes can be found in the air Vital forces cannot travel up the swan-neck flask. Without it, nothing can survive in the broth Spontaneous generation is still a valid theory. The bacteria in the broth came from the broth itself

Answers

The term "spontaneous generation" is erroneous. Only life can give birth to more life. Airborne microbes can be detected.

What is experiment?

A scientific experiment is any method that uses measurements and tests to confirm or deny a theory. A hypothesis is a notion that looks to be true but has yet to be confirmed, from which a study might be created. A basic experiment often addresses a "What would happen if...?" cause-and-effect inquiry. For example, you're wondering if misting a plant with water helps it develop faster. You get a sense of how the plant grows without being misted and then compare it to how it grows after being misted.

Here,

The phrase "spontaneous generation" is incorrect. Only life can create more life. Microbes in the air can be detected.

To know more about experiment,

https://brainly.com/question/29865934

#SPJ4

Methane and oxygen combine in a synthesis reaction. true or false

Answers

Answer:

True.

Explanation:

A synthesis reaction is a type of chemical reaction in which two or more substances combine to form a new compound. Methane (CH4) and oxygen (O2) can combine in a synthesis reaction to form carbon dioxide (CO2) and water (H2O). This reaction is exothermic and is the basis of combustion reactions.

The balanced equation for this reaction is:

CH4 + 2O2 -> CO2 + 2H2O

In this reaction, one methane molecule and two oxygen molecules combine to form one carbon dioxide molecule and two water molecules.

It's worth mentioning that methane is considered a greenhouse gas, and the combustion of methane releases carbon dioxide and water vapor into the air, which contribute to global warming and climate change.

The answer is true you can even look up on the web… I will also give you a site where you can learn more…

A crate of mass m1 = 14.00 kg is pulled by a massless rope up a 36.9° ramp. The rope passes over an ideal pulley and is attached to a hanging crate of mass m2 = 16.30 kg. The crates move 1.61 m, starting from rest.



Find the work done by gravity on the sliding crate.

Answers

The work done by gravity on the sliding crate is 176.6 J.

What is the work done by gravity on the sliding crate?

The work done by gravity on the sliding crate is calculated by applying the following formula.

W = Fd cosθ

W = mg x d cosθ

where;

m is the mass of the crateg is acceleration due to gravityd is the displacement of the crateθ is the angle of inclination of the rope

W = ( 14 kg x 9.8 m/s² ) x ( 1.61 m ) x cos ( 36.9 )

W = 176.6 J

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

A⃗ = 22x^ + (-14)y^, and B⃗ = 2.5x^ + 13y^. Express A⃗ −B⃗ in unit vector notation.

Answers

The unit vector notation in the given direction is [tex]0.58 \hat x + 0.81 \hat y[/tex].

What is vector quantity?

A physical quantity that has both directions and magnitude is referred to as a vector quantity.

A lowercase letter with a "hat" circumflex, such as "û," is used to denote a vector with a magnitude equal to one. This type of vector is known as a unit vector.

In terms of subtracting a vector, it works the same as adding the vector's opposite.

Given that:

[tex]\vec A = 22 \hat x + (-14)\hat y,\\\vec B = 2.5\hat x + 13\hat y.[/tex]

( two given vectors are written here.)

Therefore: the subtraction of these two vectors will be:

[tex]\vec A - \vec B = (= 22 \hat x + (-14)\hat y) - (2.5\hat x + 13\hat y)\\= 19.5\hat x - 27 \hat y[/tex]

Unit vector in that direction of vectors  is =

[tex]= \frac{19.5\hat x - 27 \hat y}{\sqrt{19.5^2 + (-27)^2} } \\= 0.58 \hat x + 0.81 \hat y[/tex]

Learn more about vector quantity here:

https://brainly.com/question/3482586

#SPJ1

Under what conditions, if any, will the trajectory of a charged particle not follow a field line?

Answers

A charged particle will not follow a field line if it is subjected to an external force that is greater than the force of the electric field.

What is electric field?

Electric field is an area of influence created by an electric charge. It is a vector field that surrounds a charged particle or object and exerts a force on other charged particles or objects in its vicinity. Electric fields are created by the movement of electrons and protons, which are both components of atoms. The strength of an electric field is determined by the amount of charge present, as well as the distance from the source.

For example, if a charged particle is subjected to a strong magnetic field, it will experience a Lorentz force which can cause the particle to deviate from its original trajectory and follow a curved path instead of following the field line.

To learn more about electric field
https://brainly.com/question/30144963
#SPJ4

The drawing shows two situations in which charges are placed on a and y axes. They are located at the same distance if 6.80cm from the origin O. For each of the situations in the drawing, determine the magnitude of the net electric field at the origin

Answers

The electric field strength from the origin is  1.95 x 10¹² q ( N/C ).

What is electric field?

The electric field of a charged particle is the region of space where the influence of electric force is felt.

Mathematically, the formula for electric field strength is given as;

E = kq / r²

where;

k is the Coulomb's constantq is the magnitude of the charger is the position of the charge

The electric field strength from the origin is calculated as follows;

E = ( 9 x 10⁹ x q ) / ( 0.068 m )²

E = 1.95 x 10¹² q ( N/C )

Learn more about electric field strength here: https://brainly.com/question/14372859

#SPJ1

According to the TARGET acronym, which of the following is not a measure to use to foster a mastery-oriented environment

Answers

According to the acronym TARGET, affiliation is not a strategy to support a mastery oriented environment.

Creating a mastery oriented environment is where students are actively engaged in the learning process, setting and achieving meaningful goals, and feeling a sense of accomplishment. TARGET is a useful acronym for that goal.

TARGET stands for:

Trust: Building trust between teacher and students is essential so that it increases the likelihood for taking risks and giving feedback.

Authenticity: Teachers must be authentic in their interactions with students. This means being genuinely interested and honest in teaching and assessment.

Respect: It is important to create an atmosphere of respect in the classroom. Respect should be shown to all students.

Growth Mindset: A growth mindset is essential and it means emphasizing effort and progress over ability and success.

Expectations: Teachers should set clear expectations for students, but be flexible in how these expectations are met.

Affiliation is not a measure for fostering a mastery-oriented environment.

It refers to the quality of being intimately connected to or allied with a certain individual, organization, party, business, etc.

Learn more about mastery oriented environment here:

https://brainly.com/question/30010700

#SPJ4

suppose you use the southern cross to determine that the south celestial pole appears 40 degrees above your horizon. then you must be located at group of answer choices latitude 50 degrees south. latitude 40 degrees north. longitude 40 degrees. latitude 40 degrees south.

Answers

"Suppose you use the southern cross to determine that the south celestial pole appears 40 degrees above your horizon. Then you must be located at latitude 40 degrees south." The correct option is 4th.

The local sky's star heights are unaffected by longitude.

The celestial equator and celestial horizon would coincide. Now picture yourself on the Earth's equator, at 0° latitude. Here the celestial equator would pass through your zenith and the north celestial pole (NCP) would lie at the North Point of the horizon and have an altitude of 0°.

Degrees north (+) or south (-) of the celestial equator are used to measure declination. The Earth's Equator is projected onto the Celestial Sphere to create the Celestial Equator. By definition, the CE has a declination of 0 degrees.

To know more about latitudes:

https://brainly.com/question/21098820

#SPJ4

21. A 110-V household circuit that contains an
1800-W microwave, a 1000-W toaster, and an
800-W coffeemaker is connected to a 20-A fuse.
Determine the current. Will the fuse melt if the
microwave and the coffeemaker are both on?

Answers

The final current will be 32.7 A and Yes, the fuse will melt if the microwave and the coffeemaker are both on at the same time.

How to determine current and whether or not a fuse has melted?

To determine the current, we can use Ohm's Law, which states that current (I) is equal to power (P) divided by voltage (V).

I = P/V

The total power of the three appliances is 1800 W + 1000 W + 800 W = 3600 W.

Therefore, the current is:

I = 3600 W / 110 V = 32.7 A

The fuse is rated at 20 A, so it will melt if the current exceeds 20 A. Since the current is 32.7 A, the fuse will melt if the microwave and the coffeemaker are both on at the same time.

To learn more about Ohm's Law, visit: https://brainly.com/question/14296509

#SPJ1

An electron is launched at a 45∘ angle and a speed of 5.0×106m/s from the positive plate of the parallel-plate capacitor shown in the figure (Figure 1). The electron lands 4.0 cm away.
Part a) What is the electric field strength inside the capacitor?
Part b) What is the smallest possible spacing between the plates?

Answers

(a) The electric field strength inside the capacitor is 2,519.35 N/C.

(b) The smallest possible spacing between the plates is 2 cm.

What is the time of motion of the electron?

The time of motion of the electron is calculated as follows;

X = Vₓt

t = X / Vₓ

where;

Vₓ is the horizontal component of the velocityX is the horizontal displacementt is the time of motion

t = ( 0.04 m ) / ( 5 x 10⁶ x cos 45 )

t = 1.13 x 10⁻⁸ s

The force of the electron is calculated as follows;

F = mv / t

where;

m is the mass of the electronv is speedt is the time

F = ( 9.11 x 10⁻³¹ x 5 x 10⁶ ) / ( 1.13 x 10⁻⁸ )

F = 4.03 x 10⁻¹⁶ N

The electric field strength inside the capacitor is calculated as follows;

E = F / q

E = ( 4.03 x 10⁻¹⁶  ) / ( 1.6 x 10⁻¹⁹ )

E = 2,519.35 N/C

The smallest possible spacing between the plates is calculated as follows;

vertical acceleration of electron;

a = ( Vy ) / t

a = ( 5 x 10⁶  x sin45 ) / ( 1.13 x 10⁻⁸ )

a = 3.13 x 10¹⁴ m/s²

The vertical displacement of the electron;

0 = Vy² - 2ay

y = Vy² / 2a

y = ( 5 x 10⁶ x sin 45 )² / ( 2 x  3.13 x 10¹⁴ )

y = 0.02 m

y = 2 cm

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

A machine of efficiency 80% does 3000j of work. caculate the energy used in over function?​

Answers

The machine does 3000 J of work.

This is 80% of the energy that was put into the machine.

3000 J = 0.80 x (Input energy)

Divide both sides of the equation by 0.80 .

Input energy = 3000 J / 0.8

Input energy = 3750 J

Other Questions
In statistics, a population is a set of similar items or events which is of interest for some question or experiment and a sample is a set of data collected from a population by a defined procedure. In the following examples of statistical studies, identify the population of interest and the sample and provide the sample size.An employee at the local ice cream parlor asks eight customers if they like unicorn ice cream.Population: Sample size: What is the electric flux through one side of a cube that has a single point charge of -3. 80 C placed at its center? Hint: You do not need to integrate any equations to get the answer. ? Nm^2/C The rate of the reaction was studied at a certain temperature. O(g) + NO2(g) NO(g) + O2(g) (a) In the first set of experiments, NO2 was in large excess, at a concentration of 1. 0 1013 molecules/cm3 with the following data collected. Time (s) [O] (atoms/cm3) 0 5. 0 109 1. 0 10-2 1. 9 109 2. 0 10-2 6. 8 108 3. 0 10-2 2. 5 108 What is the order of the reaction with respect to oxygen atoms? zero order half order first order second order third order Correct: Your answer is correct. (b) The reaction is known to be first order with respect to NO2. What is the overall rate law? chemPadHelp rate = k. [O]. [NO2] rate = k. [O]. [NO_2] Correct. Determine the value of the rate constant. WebAssign will check your answer for the correct number of significant figures. 3 100. 15 Incorrect: Your answer is incorrect. Cm3/moleculess Different between adding and subtracting linear a proton is placed at point a. the proton is then removed and an electron is placed at point b. what is the direction of the electric force ? give angle relative to x with ccw as positive. what is the direction of the electric force ? what is true of the magnitude of the two forces? If you do a report on the age, occupation, and zip codes of all breast cancer patients the hospital saw last year, are you using a sampleor population? !!BRAINLIEST TO CORRECT ANSWERS!!Let f(x) = 2x^2 + x - 3 and g(x) = x - 1. Perform the indicated operation, then find the domain. (f - g)(x)A) x^2 - 4; domain: positive real numbersB) 2x^2 - 4; domain: all real numbersC) x^2 - 4; domain: all real numbersD) 2x^2 - 2; domain; all real numbersLet f(x) = 2x^2 + x - 3 and g(x) = x - 1. Perform the indicated operation, then find the domain. (f * g)(x)A) 2x^3 - x^2 - 4x + 3; domain: all real numbersB) 2x^3 + x^2 - 3x; domain: all real numbersC) 2x^3 + x^2 + 4x - 3; domain: negative real numbersD) 2x^2 + x - 3x + 3; domain: positive real numbers what is the magnitude o the centripetal acelartion of the car as it goes around the cruve descibed in the passage nataro, incorporated, has sales of $670,000, costs of $332,000, depreciation expense of $76,000, interest expense of $48,000, a tax rate of 23 percent, and paid out $45,000 in cash dividends. the firm has 27,800 shares of common stock outstanding. a. what is the earnings per share, or eps, figure? when did you need to use subtlety? why? Lorena and Karla are creating an art project in the shape of a right triangle. They have a 92 cm long piece of wood, which is to be used for the hypotenuse. The two legs of the triangular support are of equal length. Approximately how many more centimeters of wood do they need to complete the supports? spaniard who conquered the aztecs of mexico in 1521. How would paying off the lowest outstanding balance credit card first be beneficial over paying off the one with the highest? 2 nh3 3 cuo g 3 cu n2 3 h2o in the above equation how many moles of n2 can be made when 42 moles of cuo are consumed? Need help to answer. ASAP. A furnace wall consists of 125 mm wide refractory brick and 125 mm wide insulating firebrick separated by an air gap. The outside wall is covered with a 12 mm thickness of plaster. The inner surface of the wall is at 11000C and the room temperature is 250C. The heat transfer coefficient from the outside wall surface to the air in the room is 17 W/m2K, and the resistant to heat flow of the air gap is 0. 16K/W. The thermal conductivities of refractory brick, insulating firebrick, and the plaster are 1. 6, 0. 3, and 0. 14 W/mK respectively. Calculate:(i) the rate of heat loss per unit area of wall surface; (ii) the temperature at each interface throughout the wall; (iii) the temperature at the outside surface of the wall. Which verbal expression best represents the equation 2(n - 7) = -14a) twice a number less than seven is equal to negative fourteenb) the product of two and seven less than a number is equal to negative fourteenc) seven less than twice a number is equal to negative fourteend) negative seven minus twice a number is negative fourteen in this activity, you will use online resources to find a person that gained unintentional social media exposure.Have you ever regretted what you shared on any social networking site? Have you been concerned about sharing your information online?Use online resources to find a person that gained unintentional social media exposure. Provide the name of the person.Describe how the person became popular online unexpectedly.Explain how this could have been prevented? true/false. according to studies based on the monoamine theory of mood, identify a true statement about drug treatments for the vast majority of psychopathologies.multiple choice question.they do not provide relief from disease-related problemsthey are not based on correcting a neurochemical abnormalitythey are not curesthey do not treat symptoms the prosecutor is an attorney for the victim in a criminal proceeding? The addition of oxygen to RuBP by rubisco to form a two-carbon product that is then broken down by the cell to carbon dioxide and water defines