Write a balanced equation for the reaction which occurs with the CaCI2 solution and the soap (a fatty acid salt). **Use “(fatty acid-CO2)-Na+” as the structure for the soap instead of drawing out the entire fatty acid structure

Percent yield = 1566%, The percent yield is greater than 100%, which means that the student obtained more product than the theoretical yield.

The theoretical yield is the maximum amount of product that could be produced in a chemical reaction, based on stoichiometric calculations. The actual yield is the amount of product that is actually obtained from the reaction in a laboratory experiment.

To calculate the percent yield of the experiment, we need to compare the actual yield to the theoretical yield.

The balanced chemical equation for the formation of alum from aluminum and potassium hydroxide is:

2 Al + 2 KOH + 4 H₂O + 1/2 O₂ → KAl(SO₄)₂·12H₂O

From this equation, we can see that the mole ratio of aluminum to alum is 2:1. This means that for every 2 moles of aluminum used, we should theoretically obtain 1 mole of alum.

First, we need to convert the mass of aluminum foil used to moles of aluminum:

0.0432 g Al × 1 mol Al/26.98 g Al = 0.001600 mol Al

Next, we can use the mole ratio to calculate the theoretical yield of alum:

Theoretical yield = 0.001600 mol Al × 1 mol KAl(SO₄)₂·12H₂O/2 mol Al × 474.39 g KAl(SO₄)₂·12H₂O/1 mol KAl(SO₄)₂·12H₂O

= 0.0382 g KAl(SO₄)₂·12H₂O

Now we can calculate the percent yield:

Percent yield = actual yield/theoretical yield × 100%

Actual yield = 0.5987 g

Percent yield = 0.5987 g/0.0382 g × 100% = 1566%

The percent yield is greater than 100%, which means that the student obtained more product than the theoretical yield. This could be due to experimental error, such as incomplete drying of the crystals or loss of product during the experiment. It's also possible that the student accidentally used more aluminum foil than intended.

Learn more about yield here:

https://brainly.com/question/30700754

#SPJ1

C. The pH stays about the same.

Answer:

C.The pH stays about the same.

Explanation:

Buffer reactions maintain stable pH of solutions.

To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

Temperature is a physical quantity that measures the average kinetic energy of the particles in a system. It is an important parameter for understanding the behavior of matter and the underlying physical processes at work. Temperature is measured in units such as degrees Celsius (°C), Fahrenheit (°F), Kelvin (K), or Rankine (°R). Temperature affects the rate at which chemical reactions occur and the movement of particles in solids, liquids, and gases.

The ideal gas law states that PV = nRT,
where n is the number of moles,
P is the pressure,
V is the volume, R is the ideal gas constant (8.314 J/molK), and
T is the temperature in Kelvin.
Rearranging the equation, we get T = (PV)/(nR).
Plugging in our values, we get T = (89.9 atm * 4191 mL)/(2.6 mol * 8.314 J/molK) = 115.2 K.
To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

To learn more about temperature
https://brainly.com/question/27988898
#SPJ1

In the peroxodisulfate ion, Peroxydisulfate-, all the atoms have oxidation values that add up to +6.

Most often, the polymerization of different alkenes, such as styrene, acrylonitrile, and fluoroalkenes, is started using salts of peroxydisulfate. The homolysis of peroxydisulfate causes polymerization to begin. 2 [Peroxydisulfate] [Sulfate]

Ag: +1

Sulfur: 0

Nitrogen: +2 (in Nitric oxide)

Oxygen: -2 (in Water)

Hydrogen: +1 (in Water)

The peroxodisulfate ion, Peroxydisulfate-, consists of one disulfate (Peroxydisulfate-) group and two peroxy (Oxygen2-) groups. Normal oxygen oxidation number is 2, however in a peroxy group it is -1. The charge of the ion, which is -2, is equal to the total sum of the oxidation numbers of all the atoms in the ion. As a result, we may write:

2(-1) + 2x + 8(-2) = -2

-2 + 2x - 16 = -2

2x = 12

x = +6

To know more about Peroxydisulfate visit:-

https://brainly.com/question/8597247

#SPJ1

The maximum mass of carbon dioxide that could be produced from 6.9 g of octane and 42.2 g of oxygen is 21.3 g, rounded to 2 significant digits.

What is Octane?

Octane is a hydrocarbon with the chemical formula [tex]C_{8} H_{18}[/tex] It is an organic compound belonging to the alkane group, which means it consists of only carbon (C) and hydrogen (H) atoms bonded together by single covalent bonds. Octane is a colorless liquid with a molecular weight of approximately 114 g/mol and is commonly used as a component in gasoline or fuel for internal combustion engines.

From the balanced equation, we know that 1 mole of octane reacts with 12.5 moles of oxygen to produce 8 moles of carbon dioxide. Therefore, 0.0605 mol of octane would require 0.0605 mol x 12.5 = 0.75625 mol of oxygen to fully react.

Since we have only 1.32 mol of oxygen, which is in excess compared to the 0.75625 mol required by octane, oxygen is the excess reactant, and octane is the limiting reactant.

Now, we can use the stoichiometry of octane to carbon dioxide to calculate the maximum mass of carbon dioxide produced:

From the balanced equation, we know that 1 mole of octane produces 8 moles of carbon dioxide.

Molar mass of carbon dioxide (CO2) = 44.01 g/mol

Maximum moles of carbon dioxide produced from octane = 0.0605 mol x 8 = 0.484 mol

Maximum mass of carbon dioxide produced from octane = 0.484 mol x 44.01 g/mol = 21.3 g

Remember to round the final answer to 2 significant digits as requested.

Learn more about Octane from the given link

https://brainly.com/question/28469125

#SPJ1

Answer:

The answer is B: 0.0025 M

According to molar concentration and dilution concept, the  [H₃O+] in the final solution is closest to 0.05 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions concentrated and diluted it is calculated as, M₁V₁=M₂V₂ substitution gives M₂=0.25×100/500=0.05

Learn more about molar concentration,here:

https://brainly.com/question/15532279

#SPJ2

5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.

Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.

To learn more about  rounded up

https://brainly.com/question/17396482

#SPJ9

Since vanadium is a transition metal and sulfate is an anion, we can insist that V(SO4)2

is an ionic compound.

Answer:

V(SO4)2 is ionic

Explanation:

In this compound, Vanadium (V) is a transition metal with an oxidation state of +5, and sulfate (SO4) is a polyatomic ion with a charge of -2. The compound is formed by the transfer of two electrons from each sulfur atom to the vanadium atom. This results in the formation of two V3+ cations and one SO42- anion, which combine to form V(SO4)2.

Ionic compounds are formed by the transfer of electrons between atoms or ions, resulting in the formation of positively charged cations and negatively charged anions. These oppositely charged ions are held together by strong electrostatic forces, forming a crystalline lattice structure.

In conclusion, V(SO4)2 is an ionic compound formed by the transfer of electrons from the sulfate ion to the vanadium ion.

The final volume of the ideal gas is 156.6 L.

A sample of an ideal gas is allowed to expand adiabatically while producing external work (W) at first. The volume is then maintained at its new value with the help of heat Q until the pressure returns to its initial level.

We can use the combined gas law to solve this problem:

(P1 × V1) / T1 = (P2 × V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and V2 are the final pressure and volume, respectively. Since the gas is kept at a constant temperature, we can simplify this to:

P1 × V1 = P2 × V2

Plugging in the given values, we get:

2.01 bar × 78.3 L = 1.00 bar × V2

Solving for V2, we get:

V2 = (2.01 bar × 78.3 L) / 1.00 bar = 157 L

Therefore, the final volume of gas is 157 L.

To know more about ideal gas visit:-

https://brainly.com/question/28257995

#SPJ1

At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water contain the same weight of solute per 100 mL of water.

Temperature is a unit of warmth or coldness that can be defined in the context of any number of arbitrary scales. It indicates the direction that heat energy will naturally flow, i.e., through a hotter (body) to a colder (body) body.

Temperature is not the same as the energy in a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at an extremely high temperature. At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water.

To know the temperature, here:

https://brainly.com/question/11464844

#SPJ1

In this reaction, aqueous solutions of lithium fluoride and potassium chloride are mixed, but no precipitate forms. This is because the products of the reaction (LiCl and KF) are both soluble in water, and therefore remain in the aqueous state.

Reaction is a process in which a system changes in response to an external stimulus. It is a response to an action, event, or phenomenon, and it is typically expressed in the form of an observable physical or mental change. Reactions can take place in a variety of forms, including chemical reactions, physical reactions, and psychological reactions. Chemical reactions are the most common type of reaction and involve the rearrangement of atoms and molecules in order to form new substances. Physical reactions involve changes in the physical properties of a system, such as changes in temperature, pressure, or volume. Psychological reactions include changes in behavior and emotion.

The complete and balanced molecular equation for the reaction between aqueous solutions of lithium fluoride and potassium chloride is:
LiF (aq) + KCl (aq) → LiCl (aq) + KF (aq)
The complete ionic equation for this reaction is:
Li+ (aq) + F- (aq) + K+ (aq) + Cl- (aq) → Li+ (aq) + Cl- (aq) + K+ (aq) + F- (aq)

To learn more about reaction
https://brainly.com/question/25769000
#SPJ1

The pH of .3 M NH, where is K = 1.7 x 10^-5 is 11.87 calculated from the equation of dissociation constant.

Kb= [A] /[A + ][X− ]

​1.7×10 −5 = x ^2 /0.3

⇒x= 7.5 ×10 −3

∴[OH − ][H + ]=7.5 ×10 −3

[H + ] =10 ^−14 ⇒pH=11.87

When describing the acidity or basicity of an aqueous solution, chemists use the pH scale, which is also known as acidity and previously stood for "potential of hydrogen". Greater pH values are seen in basic or alkaline solutions than acidic solutions.

Potential hydrogen is the meaning of the acronym pH, which indicates how much hydrogen is present in liquids and how active the hydrogen ion is.

As a first step, we shall ascertain the pKa of the solution before calculating its Ka. When a solution reaches the equivalence point, its pH and pKa are equal. So, by using a titration curve and the Ka = - log pKa equation, we may rapidly ascertain the value of Ka.

For more information on pH kindly visit to

https://brainly.com/question/2288405

#SPJ1

At 25 oC, the reaction's equilibrium constant is Cu(s) + 2Ag+ (aq) Cu+2 (aq) + 2Ag. (s). Eocell is equal to 0.47 V, R is 8.134 JK-1, and F is 96500 C at 25oC.

Antilogarithm is the value that a certain logarithm represents. For instance, x corresponds to the antilogarithm for y if log x = y. An antilogarithm of the stated number is an integer whose logarithm equals the specified number. Since 10,000 (104) has a logarithm of 4, 10,000 has an antilogarithm of 4.

Antilog of 7.06 with K equal to 1164

You must calculate K using the relationship Go = -RTlnK.  In this example, 8.315 j K-1mol-1 should be used as R, therefore lnK = Go/ -RT = -17.5 x 103 jmole-1 / (-8.315 j K-1mol-1 x 298 °K) = 7.06

An antilog on a calculator is what?

By elevating a logarithm above its base, one can find an antilog, which is the opposite of a logarithm. For instance, 10y = 5 is the antilog with y = log10(5). If y = ln(x), where y is time, and x is the value that needs to grow, then the natural logarithm can be used to determine how long it will take to reach a particular level of growth.

To know more about antilog visit:

brainly.com/question/30128293

#SPJ1

Answer:

1) 9 moles

2) 8.75 moles

3) 1.76 moles

4) 10.2 moles

Explanation:

Okay so mole ratio is 2:1

So, 9 moles of HI is required for 4.5 moles of Iodine gas

Mol ratio of water to CaCl2 is 2:1

So, 17.5 moles of water produced is (17.5/2) moles of CaCl2 i.e. 8.75 moles

Okay so mol ratio of Hydrogen to NH3 is 3:2

So, 2.64 moles of hydrogen is (2.64 * 2)/3 moles of NH3 i.e. 1.76 moles

Once again, mol ratio of Hydrogen to NH3 is 3:2

When 15.3 moles of hydrogen is used, (15.3 * 2)/3 moles of NH3 i.e. 10.2 moles

Hope this helps and be sure to mark this as brainliest! :)

The total mass of protons and neutrons makes up an element's atomic mass. Lithium is the element X; it has a mass of 6.941 u.

When an atom has the same number of protons in its atomic nucleus, it is said to be an element. The number of protons in the nucleus of each element's atoms, or atomic number, serves as the element's sole means of identification.

Seven hydrogen atoms will weigh 7.056 g as each hydrogen atom has an atomic mass of 1.008. The periodic chart shows that an atomic mass of 7.056 g is the one that is closest to that of a lithium atom (6.941 u).

Seven hydrogen atoms have a mass comparable to one lithium atom in the periodic table, based on their mass. With an atomic mass of 6.941 g/mol, the lithium atom bears the atomic number 3.

Lithium is  the name of element X.

To know more about elements, visit:

https://brainly.com/question/14347616

#SPJ9

The amount of carbon dioxide produced by all the idling described in the problem would be 89.6 kg per week.

What is Global Warming?

Global warming refers to the long-term increase in Earth's average surface temperature, primarily caused by human activities such as burning fossil fuels (coal, oil, and natural gas), deforestation, and industrial processes that release large amounts of greenhouse gases into the atmosphere.

Using the atomic masses from the periodic table, we get:

Molar mass of octane = (8 x 12.01 g/mol) + (18 x 1.01 g/mol) = 114.22 g/mol

Since the molecular formula of octane (C8H18) contains 8 carbon atoms, it produces 8 molecules of carbon dioxide (CO2) per molecule of octane during combustion.

So, the amount of carbon dioxide produced by burning 11,200 grams of octane would be:

11,200 g * (8 x 1 mol CO2 / 1 mol octane) = 89,600 g or 89.6 kg of carbon dioxide produced in a week.

Learn more about Global Warming from the given link

https://brainly.com/question/3553382

#SPJ1

Enantiomers rotate the plane of polarized light in opposite directions, and this property is used to distinguish between them in a process called optical rotation.

Enantiomers are pairs of molecules that are non-superimposable mirror images of each other.

They are isomers, meaning they have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space.

Enantiomers exhibit identical physical and chemical properties, except for their interaction with plane-polarized light (a type of light that oscillates in a single plane).

Learm= more about enantiomers at: https://brainly.com/question/30216513

#SPJ1

The molecular formula of the compound, given that it contains 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen is C₆H₁₂N₄

To obtain the molecular formula, we must first determine the empirical formula. Details on how to obtain the empirical formula is given beloww:

Divide by their molar mass

C = 51.39 / 12 = 4.283

H = 8.64 / 1 = 8.64

N = 39.97 / 14 = 2.855

Divide by the smallest

C = 4.283 / 2.855 = 1.5

H = 8.64 / 2.855 = 3

N = 2.855 / 2.855 = 1

Multiply through by 2 to express in whole number

C = 1.5 × 2 = 3

H = 3 × 2 = 6

N = 1 × 2 = 2

Thus, we can conclude that the empirical formula is C₃H₆N₂

Finally, we shall determine the molecular formula. Details below

Molecular formula = empirical × n = mass number

[C₃H₆N₂]n = 140.22

[(12×3) + (1×6) + (14×2)]n = 140.22

70n = 140.22

Divide both sides by 70

n = 140.22 / 70

n = 2

Molecular formula = [C₃H₆N₂]n

Molecular formula = [C₃H₆N₂]₂

Molecular formula = C₆H₁₂N₄

Learn more about molecular formula:

https://brainly.com/question/21568927

#SPJ1

The statement "Plasmas can change shape" and "Plasmas contain ionized particles" best describe plasmas.

Plasma is a state of matter that is similar to gas but differs in that it contains ionized particles, which are atoms or molecules that have lost or gained one or more electrons. This results in a mixture of positively charged ions and negatively charged electrons, making plasma electrically conductive.

Plasma can be found in many natural phenomena such as lightning, stars, and the aurora borealis, and it is also used in various technological applications such as plasma TVs, fusion reactors, and fluorescent lights. Because of its unique properties, plasma has many interesting and useful applications in fields such as physics, chemistry, and engineering.

Learn about plasmas here https://brainly.com/question/950535

#SPJ1

As a result, aluminium (Al) and 7.37 litres of hydrochloric acid (HCl) can react to produce 225.46 moles of hydrogen gas (H2).

As a result, when 8 moles of aluminium are entirely consumed during the process of dissolving it in HCl solution, 12 moles of hydrogen gas are created.

The chemical reaction between aluminium (Al) and hydrochloric acid (HCl) has the following balanced chemical equation:

[tex]3 H2 + 2 AlCl3 = 2 HCl + 2 Al[/tex]

According to the equation, 2 moles of HCl result in 3 moles of H2. In order to determine the amount of H2 generated, we must first determine how many moles of HCl are contained in 7.37 litres of acid.

The following formula can be used to determine the quantity of HCl:

Volume in litres times concentration in moles per litre equals moles.

Since the HCl concentration is not specified in the inquiry, we are unable to immediately calculate the moles. However, we may convert the volume in litres to the mass in grams using the density of HCl, and then use the molar mass of HCl to calculate the number of moles.

At standard circumstances (0 °C and 1 abm), HCl has a density of roughly 1.49 g/mL. As a result, 7.37 litres of HCl have the following mass:

Density equals mass, therefore 7.37 L times 1.49 g/mL equals 10.9763 kg.

Since HCl has a molar mass of about 36.46 g/mol, there are the following moles of HCl:

[tex]10.9763 kg / 36.46 g/mol = 300.61 mol is the formula for moles of HCl.[/tex]

Now, we can determine the number of moles of H2 created using the mole ratio from the balanced equation: moles of[tex]H2 = (moles of HCl / 2) x (3/2) = (300.61 mol / 2) x (3/2) = 225.46 mol[/tex]

To know more about HCI visit:

https://brainly.com/question/26549374

#SPJ1

Therefore, the standard enthalpy change for reaction (3) is -152.6 kJ.

To determine the standard enthalpy change for reaction (3), we can use Hess's law, which states that the overall enthalpy change for a reaction is the sum of the enthalpy changes for each step of the reaction.

We can see that reaction (1) has the same products as reaction (3) but in reverse order. We can use reaction (1) to reverse the formation of FeO:

2Fe(s) + O2(g) → 2FeO(s) ΔH° = -544.0 kJ

2FeO(s) → 2Fe(s) + O2(g) ΔH° = +544.0 kJ (reversed)

We can also use reaction (2) to form ZnO, which is a product in reaction (3):

2Zn(s) + O2(g) → 2ZnO(s) ΔH° = -696.6 kJ

Now, we can add the two reactions to get the overall reaction (3):

2FeO(s) + 2Zn(s) → 2Fe(s) + 2ZnO(s)

We add the enthalpies of the two reactions to get the enthalpy change for reaction (3):

ΔH° = (+544.0 kJ) + (-696.6 kJ)

ΔH° = -152.6 kJ

Learn more about standard enthalpy change at: https://brainly.com/question/29506193

#SPJ1

Answer: 40. g

Explanation:

To find the grams in 0.89 moles of CO2, we just need to use the molar mass of CO2. The molar mass which tells us how many grams are in a mole for an element or compound.

The molar mass of CO2 is equal to the molar mass of carbon, 12.0107, and 2 oxygens, 2*15.9994 (you can find the molar mass of an element on any periodic table). Add these, and you get the molar mass of CO2 to be 44.01 g/mol, a helpful value to remember.

Now, just multiply the molar mass by the amount of moles to find grams.

[tex]\frac{44.01g}{mole} * 0.89mole[/tex], moles cancel out, [tex]\frac{44.01g}{mole} * 0.89mole=40.48g[/tex]

There are 2 significant figures in the question, so I will round this answer to 2 significant figures, 40. g

For chemical reaction (3), the standard enthalpy change is 279.0 kJ.

To find the standard enthalpy change for reaction (3), use Hess's Law which states that the overall enthalpy change of a reaction is independent of the pathway between the initial and final states.

Obtain the required reaction by subtracting the enthalpy change of reaction (2) from that of reaction (1) as follows:

(1) 2C(s) + H₂(g) → C₂H₂(g) ΔH° = 226.7 kJ

(2) 2C(s) + 2H₂(g) → C₂H₄(g) ΔH° = 52.3 kJ

(3) C₂H₂(g) + H₂(g) → C₂H₄(g) ΔH° = ?

To get the enthalpy change for reaction (3), flip the reaction (2) and multiply by 1/2 so that the reactants match those in reaction (1):

(2) C₂H₄(g) → 2C(s) + 2H₂(g) ΔH° = -52.3 kJ

Now write the reaction (3) as the difference between (1) and (2):

(1) 2C(s) + H₂(g) → C₂H₂(g) ΔH° = 226.7 kJ

(2) C₂H₄(g) → 2C(s) + 2H₂(g) ΔH° = -52.3 kJ

(3) C₂H₂(g) + H₂(g) → C₂H₄(g) ΔH° = 279.0 kJ

Therefore, the standard enthalpy change for reaction (3) is 279.0 kJ.

Find out more on enthalpy change here: https://brainly.com/question/16387742

#SPJ1

Answer: the wavelength of the photon is approximately 3.58 × 10^-18 meters.

Explanation: where E is the energy of the photon, h is Planck's constant, f is the frequency of the photon, c is the speed of light, and λ is the wavelength of the photon.

We can rearrange this equation to solve for the wavelength:

λ = hc/E

where all variables have their previously defined meanings.

First, we need to convert the energy from joules to electronvolts (eV), which is a more commonly used unit for photon energy:

8.87 × 10^-28 J = 8.87 × 10^-28 J / 1.602 × 10^-19 J/eV = 5.53 × 10^-10 eV

Next, we can substitute the given values into the equation:

λ = (6.626 × 10^-34 J s) × (2.998 × 10^8 m/s) / (5.53 × 10^-10 eV)

Simplifying, we get:

λ = 3.580 × 10^-18 m

Finally, we can express the wavelength in scientific notation with three significant figures:

λ = 3.58 × 10^-18 m

a) The balanced equation is NaOH + HCl → NaCl + H2O

b)  The concentration of the hydrochloric acid is 0.655 mol L-1.

c)  The amount of hydroxide ions used is 0.010 mol.

d)  The concentration of the hydrochloric acid is 0.655 mol L-1.

(a) The balanced chemical equation for the reaction between sodium hydroxide and hydrochloric acid is:

NaOH + HCl → NaCl + H2O

(b) To find the average titre volume, we need to add up the four readings and divide by the number of readings:

Average titre volume = (17.00 mL + 14.96 mL + 15.02 mL + 15.00 mL) / 4 = 15.25 mL

However, it is important to convert this volume to liters (L) before using it in any calculations:

Average titre volume = 15.25 mL = 0.01525 L

(c) The amount of hydroxide ions used in the titration can be calculated using the balanced chemical equation and the volume and concentration of the sodium hydroxide solution:

Amount of NaOH used = concentration × volume

= 0.40 mol L-1 × 0.0250 L

= 0.010 mol

Since the balanced chemical equation shows that one mole of NaOH reacts with one mole of HCl, the amount of hydroxide ions used is also 0.010 mol.

(d) To calculate the concentration of the hydrochloric acid, we need to use the amount of hydrochloric acid used and the volume of the average titre reading:

Amount of HCl used = concentration × volume

= concentration × 0.01525 L

Since one mole of HCl reacts with one mole of NaOH, the amount of HCl used is equal to the amount of NaOH used, which we calculated in part (c):

Amount of HCl used = 0.010 mol

Substituting this value into the above equation gives:

0.010 mol = concentration × 0.01525 L

Solving for concentration gives:

concentration = 0.010 mol / 0.01525 L = 0.655 mol L-1

Therefore, the concentration of the hydrochloric acid is 0.655 mol L-1.

Learn more on ions here https://brainly.com/question/13692734

#SPJ1