ANSWER
The chemical formula of Hydroiodic acid is HI
EXPLANATION
Hydroiodic acid is formed from a reaction between hydrogen and iodine resulting into an aqueous solution of Hydrogen iodide
[tex]\begin{gathered} H^{+_{}}+I^-\rightarrow HI_{(aq)} \\ \end{gathered}[/tex]Hence, the chemical formula of Hydroiodic acid is HI
What type of evidence does this image BEST represent?
An imprint of a shoe sole on soil.
A.
trace evidence
B.
biological evidence
C.
ammunitions evidence
D.
impression evidence
Answer:
the answer is A since the foot is printed
Answer:
It represents a trace evidence,since it leads to a suspect
What is the total energy required to break all the bonds in 1 mol hexane C6H14?A) 760 kJB) 5780 kJC) 1740 kJD) 7520 kJ
The total energy to break the hexane bonds will be equal to the sum of each of the energy to break each bond.
So the first thing we're going to do is determine how many and what type of bonds hexane has. Hexane is an alkane, meaning the C-C bonds are all single bonds. We also have C-H bonds. According to the structure of hexane, we will count each of the bonds in the following figure:
The number of C-H bonds is written in blue, we see that there are 14 C-H bonds, which coincides, being an alkane, with the number of hydrogen atoms.
The number of C-C bonds is written in orange. The number of C-C bonds is equal to 5.
Now, we multiply the energy to break each bond by the number of bonds and add the energy of the C-H and C-C bonds.
[tex]TotalEnergy=14\times Energy(C-H)+5\times Energy(C-C)[/tex][tex]\begin{gathered} TotalEnergy=14\times413kJ/mol+5\times347kJ/mol \\ TotalEnergy=7517kJ/mol \end{gathered}[/tex]So, for 1 mol of hexane the energy. required to break all the bonds will be 7514kJ
Answer: The closest value to the answer is 7520. D) 7520 kJ
A chemist determined by measuring that 0.0750 moles of calcium participated in a chemical reaction. Calculate the mass of the calcium that participated in the chemical reaction. Be sure your answer Has the correct number of significant digits.?g
The mass of 0.0750 moles of calcium is 3.01g.
To calculate the mass of calcium we need to use the molar mass that we can find in the Periodic Table of Elements.
The molar mass of calcium is 40.1 g/mol.
Now, with a mathematical Rule of Three we can calculate the mass of calcium of 0.0750 moles:
[tex]\begin{gathered} 1\text{ mol Ca \_\_\_\_\_\_\_\_ 40.1 g} \\ \text{ 0.0750 mol \_\_\_\_\_\_\_ x = }\frac{0.0750\text{mol . 40.1g }}{1\text{mol}} \\ \\ x=3^{}.01\text{ g} \end{gathered}[/tex]So, the mass of 0.0750 moles of calcium is 3.01g.
Calculate the number of molecules in 2.37 g of c3H8 (molar mass 44.11 g/mol)
Step 1
Avogadro's number states that:
1 mole of C3H8 = 44.11 g of C3H8 = 6.02x10^23 formula units (molecules in this case)
---------
Step 2
Information provided:
2.37 g C3H8
The molar mass = 44.11 g/mol
---------
Step 3
Procedure:
44.11 g C3H8 ---------- 6.02x10^23 molecules of C3H8
2.37 g C3H8 ---------- X
X = 2.37 g C3H8 x 6.02x10^23 molecules of C3H8/44.11 g C3H8
X = 3.23x10^22 molecules of C3H8
Answer: Please, revise your options because I cannot find any mistake in my procedure. (Ask your teacher, please)
I found 3.23x10^22 molecules of C3H8 but there is no option alike.
Please help me to find yield of Alcl3 in gram
Theoretical yield is calculated based on the stoichiometry of the chemical equation. First, we have to find the number of moles of each reactant using the molar mass of each of them. You can find the molar mass using the periodic table: the molar mass of aluminum (Al) is 26.98 g/mol and the molar mass of chlorine gas (Cl2) is 70.8 g/mol:
[tex]34.0\text{ g Al}\cdot\frac{1\text{ mol Al}}{26.98\text{ g Al}}=1.26\text{ moles Al.}[/tex][tex]39.0gCl_2\cdot\frac{1\text{ mol }Cl_2}{70.8\text{ g }Cl_2}=0.551\text{ moles }Cl_2.[/tex]The next step is to find how many moles of AlCl3 are produced by each reactant. You can see that in the chemical equation, 2 moles of Al produces 2 moles of AlCl3:
[tex]1.26\text{ moles Al}\cdot\frac{2molesAlCl_3}{2\text{ moles Al}}=1.26molesAlCl_3.[/tex]And 3 moles of Cl2 produces 2 moles of AlCl3:
[tex]0.551molesCl_2\cdot\frac{2molesAlCl_3}{3molesCl_2}=0.367molesAlCl_3.[/tex]You can realize that the maximum, amount of moles that are produced of AlCl3 is 0.367 moles because Cl2 would be the limiting reactant and there is an excess of Al. For this value, we have to find its mass using the molar mass of AlCl3 which is 133.2 g/mol:
[tex]\text{0}.367molesAlCl_3\cdot\frac{133.2gAlCl_3}{1molAlCl_3}=48.88gAlCl_3.[/tex]The answer would be that the theoretical yield of AlCl3 is 48.88 g.
How is chemical weathering different from physical weathering?(30 points)
Chemical weathering forms new substances, while physical weathering does not.
Chemical weathering involves plants and animals, while physical weathering does not.
Chemical weathering requires a reaction with water, while physical weathering does not.
Chemical weathering results in the breakdown of rock, while physical weathering does not.
Answer:
Chemical weathering results in the breakdown of rock, while physical weathering does not.
Explanation:
When a substance such as ice, rushing water, wind, rapid heating or cooling, or plant growth exerts force on a rock, it breaks the rock physically or mechanically. Chemical weathering is the process by which a substance dissolves a rock, resulting in the rock's fragments falling away.
In which of the following atoms does a 3p electron experience the greatest effective nuclear charge?
Question options:
P
Cl
Si
Ar
Al
Answer:
Ci
Explanation:
because it is an electron effective nuclear charge
Please if you could even help with one
The chart of given following ion is
Protons Electrons Neutrons
1) 6 2 8
2) 6 2 7
3) 8 10 9
4) 8 10 8
What are sub atomic particles ?Simply put, a subatomic particle is a particle that is smaller than an atom. Protons, electrons, and neutrons are the three subatomic particles that may typically be separated from an atom.
A neutral atom has the same number of protons and electrons as protons. The sum of the protons and neutrons in the atom's nucleus determines its mass, which is denoted by the letter M. The number of neutrons is equal to the discrepancy between the atomic number and the mass number of the atom (M) (Z).Learn more about Sub atomic particles here:
https://brainly.com/question/16847839
#SPJ13
How many gram of iron is how many moles in 5237 & how many in 4180
To get the number of moles, you need to use this equation:
n = m/M
where n is the number of moles, m is the mass and M is the molar mass of Iron.
Given:
m = 5227 g
M = 55.8 g/mol (from the periodic table)
Therefore
n = 5227 g/55.8 g/mol
n = 93.7
The first option is closer to 93.7 so the answer is the first option.
Multiply or divide the following measurements. Be sure your answer You and your contains the correct significant digits. 827.76 divided 60.65 s = m/s685.5 mol divided 0.50 L = mol/L20.9476 cm x 26. Cm = cm^2
827.76 m/60.65 s = 13.65 m/s
685.5 mol/0.50 L = 1371 mol/L
20.9476 cm x 26 cm = 545 cm^2
When adding/subtracting
Use the least number of significant figures past the decimal point when adding or subtracting numbers.
When multiplying/dividing
Use the least number of significant figures present in any number in the problem when multiplying or dividing numbers.
Which of the following is used to find the mass of 3.2 moles of calcium carbonate?
1) Converting grams to moles or moles to grams
In order to do this kind of conversion, we need the molar mass (in grams) of the compound to use it as a conversion factor as follows:
[tex]\frac{molarmassofthecompound_{}}{1molofthecompound_{}}[/tex]-
Use the chemical equation to answer the questionCo(H0+4Cr+heat CoCl₂ + 6H₂OCobalt ions form complex ions with water and chloride. The Co(H₂O) ions are pink, and the CoCions are blue. A scientist creates a solution that is purple at equilibrium. How can thescientist make the solution more pink?(2 point)O by adding hydrochloric acid (HCI)Oby adding Co(H₂O) ionsO by adding water (H₂O)
Answer
By adding water (H2O)
Explanation
In this reaction, water is a product, adding the product will favour the reverse reaction, which is the formation of more Co(H2O)6^2+.
Carbon dioxide gas can be pumped into coal seams underground to release trapped methanegas. Calculate the molar volume of carbon dioxide gas at 700 °C and 6500 kPa
Answer:
Explanation:
Here, we want to get the molar volume of the gas
At STP, 1 mole of a gas occupies a volume 0f 22.4 dm^3
The conditions at STP are 273K
A certain first-order reaction is 46% complete in 45 s. What are the values of the rate constant and the half-life for this process?
The rate constant ( k )= 9.2 x 10⁻³ s⁻¹The half life (t1/2 )= 75.3 s
It is given that the reaction is 46% complete in 45 s
The relation between rate constant and the half life can be shown as:
For first order reaction:
ln[A]=−kt+ln[A]o
46% complete, 54% remains
A = 0.54
Ao = 1
Put the value of given data in the formula:
ln A = -kt + ln Ao
ln 0.54 = -k.45 + ln 1
-0.616=-k.45
k = 13.6 x 10⁻³ s⁻¹
The half life can be determined by using the formula:
t1/2 = (ln 2) / k
t1/2 = 0.693 / 13.6 x 10⁻³
t1/2 = 0.0509 ×10⁻³ s.
t1/2 = 5.09 ×[tex]10^{5}[/tex] s.
Therefore, the rate constant for the first order reaction will be 13.6 x 10⁻³ s⁻¹ and half life will be 5.09 ×[tex]10^{5}[/tex] s.
To know more about rate constant
https://brainly.com/question/14521461
#SPJ1
For this assignment, please submit your 5 paragraph report. ObjectiveYou will write a report on the states of matter, answering the question:How do water molecules change as their state of matter changes from solid, to liquid, to gas?MaterialsParagraph graphic organizerRubricThe Changing Water Molecule ReportHow do water molecules change as their state of matter changes? You will explore these changes as you write your report on the changing molecules.Hydrogen and oxygen bond together to form water molecules. Water's state of matter will change depending on how these molecules are arranged. You have been learning about the three states of matter - solid, liquid, and gas. Use this knowledge to write a report in response to this question:How do water molecules change as their state of matter changes from solid, to liquid, to gas?Your report should include an introduction, a paragraph for each state of matter explaining its qualities, and a conclusion.Use the paragraph graphic organizer below to help you build each paragraph. **Please note: You will be submitting a separate sheet(s) of paper that includes your 5 paragraph report. You do not need to submit the graphic organizer.
Introduction
Water is a molecule that composed of chemical elements oxygen and hydrogen. Waterrogen. Water behaves differently than other substances, this is because water can be changed from being a solid to liquid or a gas (vapour). This is known as changing state of matter. Water is a liquid at room temperature, however, it becomes a solid when the temperature is cooled down. The same water can turn into vapour or gas if it is heated up to a certain temperature. Therefore the state of water depends on the temperature.
Solid water
At a temperature below or equal to zero degrees Celsius, the water molecule turns to be a solid (ice), this is called freezing. At this state the water molecules are packed close together, this prevents water from changing its shape, thus, the atoms in solid water are not active, even when ice is removed from its container, it retains its shape. Water in its solid state has a very regular pattern whereby the water molecules are apart from one another and are connected by hydrogen bonds which forms a crystalline lattice. These crystals have a number of open regions and pockets which makes ice less dense than liquid water. This is the main reason ice floats on water. In the solid state, there is not enough thermal energy to overcome the intermolecular forces (hydrogen bonding), thus particles vibrate around fixed axes.
Liquid water
When the ice is warmed from its freezing point, the water molecule changes from solid to liquid water, when the temperature is higher than zero but lower than 100 degrees Celsius. This process is called melting. The attractive forces between the water molecules weaken and individual molecules begin to move around each other, but they are still attracted to each other. Since liquid water molecules can move around, this state can take the shape of its container. The spacing of liquid water molecules per unit volume are actually smaller than it is for solid water, which means liquid water is more denser than solid water. Liquid water have no definite shape, however, has a definite volume.
Gas water
The third state of water is its gaseous state. In this state water molecules move freely and rapidly because they are not bound together. The change form liquid to vapour or gas is called vaporization, this process occurs at a temperature of 100 degrees Celsius. Gas water molecules have no definite shape, nor definite volume. Particles or atoms move randomly and are less attracted to each other. Gas water molecules are highly compressible.
Conclusion
Water exists in three forms or states. These include solid, liquid and gaseous states. Water is a liquid at room temperature, whereas it is a solid at temperatures below or equal to zero. When the water is heated up to 100 degrees Celsius, it turns to a gaseous state.
2.75 grams of Potassium represent how many grams of Potassium?Group of answer choices39.10 grams107.5 grams14.22 grams215 grams
Solutions :
We are given
• mass of potassium = 2.75 g
,• Recall that 1 mole of potassium = 39.0983 grams
So , 2.75 g will represent
[tex]\begin{gathered} If\text{ 1 mole K : 39.0983 grams } \\ \text{then 2.75 mol : x } \\ \therefore\text{ x grams = (2.75 moleK }\cdot\text{ 39.0983 g) / 1 mole K } \\ \text{ = 107.52 grams } \end{gathered}[/tex]This means that 2.75 moles of Potassium represent 107.52 grams of potassium.Which statement best describes a weak base in solution?A. The base forms a concentrated solution.B. The base dissociates completely.C. The base forms a dilute solution.D. The base dissociates slightly.
Answer:
[tex]D[/tex]Explanation:
Here, we want to get the definition of a weak base
A weak base is a base that does not dissociate completely in solution.
What this means is that when the base is placed in a solution, its dissociation into the corresponding metallic and hydroxide ions is incomplete
1. Find the elements sodium, oxygen, and phosphorus on the periodic table. Describe the monoatomic ions each would form. Then, given what you know about chemical bonding, describe and give the formulas for the types of ionic compounds they would produce with each other. Use the periodic table in the Chemistry: Problems and Solutions book to help with your answers.2. Given the chemical formulas of the following compounds, name each compound and state the rules you used to determine each name.KIFe2O3(NH4)3PO4
Answer for 2:
- KI: potassium iodide
- Fe2O3: diiron trioxide
- (NH4)3PO4: ammonium phosphate
Explanation for 2:
• KI,:
The compound KI is called potassium iodide, because it is a hydracid salt that has potassium in the positive parte (that's why it keeps the name of the metal). While the negative parte of the salt comes from the non-metal iodine.
• Fe2O3,:
The compound Fe2O3 is called
, because the molecule of this oxide has 3 oxygen atoms and 2 iron atoms.
• (NH4)3PO4:
The (NH4)3PO4 is a salt called ammonium phosphate, because it is formed from phosphoric acid (that gives the negative part of the salt), and ammonia (that gives the positive part of the salt). The negative part of salt ends in "...ate" because it comes from the acid that ends with the suffix "...ic".
Amanda is sending away hair samples to be tested for DNA. What is the BEST sample she can send to the lab for testing?
A.
hair from the telogen stage
B.
hair that has naturally shed
C.
hair with exposed follicular tissue
D.
hair that has been dyed
The sample of hair with exposed follicular tissue is the BEST sample she can send to the lab for DNA testing (Option C).
What is a DNA sample?A DNA sample is any tissue that can be used to extract DNA and therefore it is multipurpose because it can be used to identify an organism, identify polymorphisms, find gene variants associated with a phenotype of interest., etc.
Therefore, with this data, we can see that the sample of a follicular tissue contains DNA which can be used for different purposes such as the identification of an individual.
Learn more about the DNA samples here:
https://brainly.com/question/17133167
#SPJ1
If 30.0 mL of 0.150 M CaCl2 is added to 22.0 mL of 0.100 M AgNO3, what is the mass of the AgCl precipitate?
If 30.0 mL of 0.150 M CaCl2 is added to 22.0 mL of 0.100 M AgNO3 then 0.0022 moles AgNO3 will be precipitated.
The balanced chemical equation can be written as:
[tex]2AgNO_{3}[/tex] + [tex]CaCl_{2}[/tex] → 2AgCl + [tex]Ca(NO_{3} )_{2}[/tex]
Molecular Weight of CaCl2 = 110.98 g/mol
[tex]Ca(NO_{3} )_{2}[/tex] =170.01
AgCl = 143.45 g/mol
Volume of calcium chloride ([tex]CaCl_{2}[/tex] ) =30.0mL
1 ml = [tex]10^{-3}[/tex] L
So, 30 ml =0.03L
[tex]AgNO_{3}[/tex] = 22 mL= 0.022 L
1 ml = [tex]10^{-3}[/tex] L
So, 22 ml =0.022 L
By solving for the limiting reactant one needs to get the moles [tex]CaCl_{2}[/tex]and mols [tex]AgNO_{3}[/tex].
calcium chloride ( [tex]CaCl_{2}[/tex] ) = 0.150M(mol/L) × 0.03L = 0.0045 moles
Silver nitrate ([tex]AgNO_{3}[/tex] ) = 0.100M ×0.022L = 0.0022 moles
Since the stoichiometric ratio of Silver nitrate ( [tex]AgNO_{3}[/tex] ) to calcium chloride ( [tex]CaCl_{2}[/tex]) is 2:1
0.0022 mols [tex]AgNO_{3}[/tex] × (1 mol [tex]CaCl_{2}[/tex] / [tex]AgNO_{3}[/tex] 2 mols ) = 0.00085 mols [tex]CaCl_{2}[/tex] .
Therefore, 0.0022 moles [tex]AgNO_{3}[/tex] will be obtained.
To know more about precipitated.
https://brainly.com/question/28238910
#SPJ1
Arrange in order of increasing atomic size. (Use the appropriate <, =, or > symbol to separate substances in the list.)
Answer: the order of increasing atomic size is: Si < Sn < Pb
Explanation:
The question requires us to arrange the elements Si, Pb and Sn in order of increasing atomic size.
The atomic size of different elements can be compared based on the atomic radius of the atoms. Considering the periodic table, the atomic radius tends to increase from right to left and from the top to the bottom of the table. Therefore, if we locate the elements Si, Pb and Sn on the periodic table, we can compare their size based on the atomic radius tendency.
Looking at a periodic table, we can locate the elements Si, Pb and Sn as it follows (highlighted in red):
Note that these elements belong to the same group and that Si is above Sn, that is above Pb.
Therefore, knowing that the atomic radius increase from the top (Si) to the bottom (Pb), the order of increasing atomic size is: Si < Sn < Pb
which of the following statements are consistent with dalton's atomic theory as it was originally stated?
a. Sulfur and oxygen atoms have the same mass.
b. All cobalt atoms are identical.
c. Potassium and chlorine atoms combine in a 1:1 ratio to form potass...
Option B. All cobalt atoms are identical and are consistent with dalton's atomic theory as it was originally stated.
The primary part of dalton's atomic theory states that everyone relies on is manufactured from atoms, which can be indivisible. the second part of the theory says all atoms of a given element are the same in mass and house. The 0.33 part says compounds are combos of two or more exceptional kinds of atoms.
Dalton's atomic theory, atoms of one element are all the equal or same. for this reason, the assertion that every cobalt atoms are identical is consistent with Dalton's concept of the shape of atoms.
Dalton's atomic concept additionally proposed that each atom of an element is identical in nature and exceptional elements vary in length, mass, and chemical properties. So, the accurate answer is choice 1 which says that the first and 2d statements are correct.
Learn more about dalton's atomic theory here:-https://brainly.com/question/13157325
#SPJ4
Parts of a neuron include:
A. dendrites.
B. hormones.
C. cortexes.
D. collosums.
The parts of the neuron include (A) dendrites.
What are dendrites?Dendrites are appendages that are designed to receive communications from other cells. They take the shape of projections with a tree-like structure that are triggered by other neurons and carry the electrochemical charge to the cell body. These occupy a large surface area of a neuron.These little appendages convey electrical stimulation to the soma and take in information from neighboring neurons. Synapses are also found on dendrites.Dendrites are also called the "arms" of a neuron.As it is given in the description, Synapses are also found on dendrites.
Therefore, the parts of the neuron include (A) dendrites.
To learn more about dendrites, click on the link:
https://brainly.com/question/11364230
#SPJ13
Predict the shape of the molecule.
A. octahedral
B. Linear
C. Trigonal Pair
D. tetrahedral
Answer:
Trigonal planar
Explanation:
Everything is connected to our central atom 'I'.
Iodine has 3 bonds around it: 1 single bond and 2 double bonds.
This 3 bonds will make a trigonal planar, hence the prefix 'tri' in the name (tri stands for the number 3).
important characteristics of homologous series
EXPLANATION:
Homologous series can be defined as a sequence of compounds with the same functional group and similar chemical properties in which the members of the series differ by -CH2. The homologous series the chemical properties of the element.
Below are the characteristics of the homologous series
1. The members of the homologous series have the same functional group
2. The members of the homologous series have a general method of preparation
3. The members of the homologous series differ by -CH2
4. The members of the homologous series have the same chemical properties.
I need help with this question The choices are fusionVaporizationSublimation FreezingCondensation Deposition
In the given illustration, it is observed that at first molecules are dispersed without any type of configuration or order and they adapt to the container shape. It means that they represent a liquid.
At the second stage, molecules are ordered and they have a defined shape, which is characteristic of solids.
It means that the change converted a liquid into a solid.
This is known as freezing. A liquid is frozen to became a solid, one example is water and ice.
It means that the correct answer is Freezing.
During freezing you release energy, this is because the liquid has to lose heat to become a solid. The answer to the second part is releases.
How many grams of CO2; will be produced if 13.56 moles of O2, are used to completion? (C2H4 + 3O2=2 CO2, + 2 H2O)
Answer:
397.8 g of CO2.
Explanation:
First, let's write the chemical equation:
[tex]C_2H_4+3O_2\rightarrow2CO_2+2H_2O.[/tex]We want to find the grams of CO2 produced by 13.56 moles of O2, so we can find how many moles of CO2 are being produced, so we can do a rule of three based on this logic: you can see that we have 3 moles of O2 reacted producing 2 moles of CO2, so how many moles would we obtain from 13.56 moles of O2?:
[tex]\begin{gathered} 3\text{ moles O}_2\rightarrow2\text{ moles CO}_2 \\ 13.56\text{ moles O}_2\rightarrow?\text{ moles CO}_2 \end{gathered}[/tex]The calculation would be:
[tex]13.56\text{ moles O}_2\cdot\frac{2\text{ moles CO}_2}{3\text{ moles O}_2}=9.04\text{ moles CO}_2.[/tex]The final step is to convert from 9.04 moles of CO2 to grams using its molar mass which is 44 g/mol (you can calculate the molar mass of a compound using the periodic table). The conversion would look like this:
[tex]9.04\text{ moles CO}_2\cdot\frac{44\text{ g CO}_2}{1\text{ mol CO}_2}=397.8\text{ g CO}_2.[/tex]We will produce 397.8 g of CO2.
I can not figure out problem #10 b and c
b) firstly we nee dto understant that 1 ton = 2831.68 litres
therefore if 16 967.04 Litres needs transporting we simply divide the 16 967.04 by 2831.68 and the answer is 5.99 which is rounded of to 6. therefore 6 trucks will be needed
c) we need to first find out how many gallons of fuels will be needed to complete a 285 mile distance. so we divide 285 by 7.8 to get 36.54 gallons and we know the price of i gallon to be $3.95 therefoe the cost will be
3.95 x 36.54 = 144.33
the cost is $144.33 per day
Arrhenius base produces which ion in solutionGroup of answer choiceshydrogen ionshydroxide ionsneitherboth
An Arrhenius base is a compound which ionizes to yield hydroxide ions (OH−) in aqueous solution.
How many ions in 800.0mL of 0.10M sucrose
M = mol/L
To solve for the number of atoms in a certain amount of moles, we must multiply the number of moles by Avogadro's number ([tex]N_A[/tex]): [tex]6.02*10^{23}[/tex], and multiply the product by the number of atoms in the compound.
Solving the QuestionWe're given:
Sucrose = [tex]C_{12}H_{22}O_{11}[/tex]800.0 mL0.10 MFirst, we must find the number of moles. We can do this by first converting 800.0 mL to L and multiplying it by 0.10 M.
800.0 mL ÷ 1000 = 0.8 L
⇒ Now, multiply 0.8 L by 0.10 M:
0.8 L × 0.10 M = 0.08 mol
Now, we must find the number of molecules in this sample. Multiply 0.08 mol by Avogadro's number:
[tex]0.08*6.02*10^{23}\\=0.4816*10^{23}\\=4.816*10^{22}[/tex]
Finally, to find the number of atoms in the sample, multiply the number of molecules by the number of atoms in the compound.
We can begin by finding the number of atoms in sucrose:
[tex]C_{12}H_{22}O_{11}[/tex]
12 + 22 + 11 = 45 atoms
⇒ Multiply 45 atoms by [tex]4.816*10^{22}[/tex] mol:
[tex]45*4.816*10^{22}\\=216.72*10^{22}\\=2.1672*10^{24}[/tex]
Convert to the correct number of significant figures (2):
[tex]=2.17*10^{24}[/tex]
Answer[tex]2.17*10^{24}[/tex] atoms