You and your family go out to lumix for dinner the bill is $82.50 if you leave a 20%tip how much is the total meal

The statement that is not true about samples is: "samples picked randomly are more representative of a population."

To determine this:

While random sampling is one way to ensure that a sample is representative of a population, it is not the only way. There are other methods of sampling such as stratified sampling, cluster sampling, and systematic sampling that can also be used to obtain a representative sample.

It is important to note that, even with random sampling, a sample may not be representative of the population if the sample size is too small or if there is a significant amount of bias in the sampling process.

To learn more about the  random sampling, visit:

brainly.com/question/29852583

#SPJ4

The design of the experiment is Completely randomized over two factors (fertilizer and location).

Randomization is a statistical technique used in experimental design to ensure that all possible combinations of the factors being studied are represented in the study groups. It is used to eliminate bias and control for confounding variables that may affect the outcome of an experiment.

The researcher randomly assigned the tomato plants to be planted on either the sunny or the shady side of the hill. This creates two groups or two levels of the factor "location". She also randomly assigned the tomato plants to one of three groups based on the amount of fertilizer given, creating three groups or three levels of the factor "fertilizer".

The random assignment of plants to the different groups for both factors helps to ensure that any differences in the yield of tomatoes is due to the independent variables (fertilizer and location) being tested, and not due to other extraneous factors.

Therefore, The design of the experiment is Completely randomized over two factors (fertilizer and location).

To know more about randomization refer to:

brainly.com/question/17238189

#SPJ4

According to the question rate at which the volume is dV/dt = dV/dm * dm/dt + dV/dθ * dθ/dt.

The space covered within an object's borders in three dimensions is referred to as its volume. It is refereed as the object's capability on occasion.

Volume, which is measured in cubic units, is the three dimensional volume occupied by matter or encircled by a surface. The cubic centimeter (m3), a derived unit, is the Standard unit of volume.

Substituting in the given information, we have:

V(m, θ) = sqrt(θ) * ln(m)

m(t) = t^2 + 3

θ(t) = e^t

Therefore:

dV/dm = (1/m) * sqrt(θ)

dm/dt = 2t

dV/dθ = (1/2sqrt(θ)) * ln(m)

dθ/dt = e^t

plugging in the values of m(t) = t^2 + 3 and θ(t) = e^t

dV/dt = (1/(t^2+3)) * sqrt(e^t) * 2t + (1/2sqrt(e^t)) * ln(t^2+3) * e^t

So the rate at which the volume is changing at time t is given by dV/dt

To know more about volume visit:

https://brainly.com/question/1578538

#SPJ1

The angle ∠R, ∠S, and ∠T for the quadrilateral are ∠R, ∠S, ∠T = 112°, 112°, 68°.

what are quadrilaterals?

A quadrilateral is a polygon with four sides, four vertices, and four angles.

It is formed by joining four non-collinear points. The sum of the interior angles of quadrilaterals is always equal to 360 degrees. The word quadrilateral is derived from the Latin words ‘Quadra’ which means four and ‘Latus’ means ‘sides’. Not all the four sides of a quadrilateral need to be equal in length. Hence, we can have different types of quadrilaterals based on sides and angles.

Five special quadrilaterals are shown below in the image, along with their definitions and pictures, and points for them to get proven.

Now,

TQRS is an inscribed quadrilateral.

5 x - 52° + 3 x + 40° = 180°

8 x - 12° = 180°

8 x = 180° + 12°

8 x = 192°

x = 192° : 8 = 24°

m∠ R = 3 · 24° + 40° = 112°

m∠ T = 5 · 24° - 52° = 68°

m∠ S = 360° - ( 68° + 68° + 112° ) = 112°

Answer:  

∠R, ∠S, ∠T = 112°, 112°, 68°.

To know more about Quadrilaterals visit the link

https://brainly.com/question/29934291?referrer=searchResults

#SPJ1

Right question:-

"In quadrilateral QRST, m∠Q is 68°, m∠R is (3x + 40)°, and m∠T is (5x − 52)°. What are the measures of ∠R , ∠S , and ∠T ? Write the numerical values in that order with the measures separated by commas.

The original matrix's rank > the augmented matrix's rank. So the option C "the solution set is empty" is correct.

The matrix is

[tex]\left [ \begin{matrix}1 & 7&3 & -4\\ 0& 1& -1 & 3\\ 0& 0 & 0& 2\\ 0&0 & 1&1 \end{matrix} \right ][/tex]

To determine the solution set we simplify the given matrix by performing the row operations.

[tex]R_{4}\leftrightarrow R_{3}[/tex]

[tex]\left[\left.\begin{matrix}1 & 7 &3 \\ 0& 1 & -1\\ 0& 0 & 1\\ 0&0 &0 \end{matrix}\right|\begin{matrix}-4\\ 3\\ 1\\ 2\end{matrix}\right][/tex]

The rank of main matrix = 3

The rank of augmented matrix = 4

The rank of main matrix < The rank of augmented matrix

So, there is no solution. The solution set is empty.

To learn more about augmented matrix link is here

brainly.com/question/16796667

#SPJ4

The complete question is:

The augmented matrix of linear system has been reduced by row operations to the form shown. Continue the appropriate row operations and describe the solution set of the original system:

[tex]\left [ \begin{matrix}1 & 7&3 & -4\\ 0& 1& -1 & 3\\ 0& 0 & 0& 2\\ 0&0 & 1&1 \end{matrix} \right ][/tex]

Select the correct choice below and; if necessary; fill in the answer boxes to complete your choice.

A: The solution set has exactly one element

B. The solution set has infinitely many elements

C. The solution set is empty

Step-by-step explanation:

you mean the slope-intercept form of a line equation ?

y = mx + b

or what is the problem ?

if my assumption is correct, then m is the slope of the line.

and we got a point on the line.

so, we could start with the point-slope form and then transform.

the point-slope form is

y - y1 = m(x - x1)

again, m is the slope, (x1, y1) is a given point on the line.

so, we have

y - -8 = 6(x - 12)

y + 8 = 6x - 72

y = 6x - 80

that means b = -80

The general solution of a linear second order homogeneous equation is represented as the combination of two particular solutions.

This is because the linear second order homogeneous equation is of the form ax2+bx+c=0 and has two distinct roots, i.e. x1 and x2. The general solution of the equation can be written as y=C1y1+C2y2, where C1 and C2 are constants and y1 and y2 are the two particular solutions. The particular solutions can be derived from the two distinct roots of the equation using the formula y1=e^(x1*t) and y2=e^(x2*t). The constants C1 and C2 can be found by solving the linear combination of the two particular solutions for the given initial conditions of the equation. This gives the general solution of the linear second order homogeneous equation as a combination of the two particular solutions.

Learn more about homogeneous equation here:

https://brainly.com/question/16921211

#SPJ4

The Pythagorean Theorem holds true for both triangles, then the triangles are not only similar, but also congruent.

Triangle xyz has sides of length x, y, and z and triangle pqr has sides of length p, q, and r.

To determine if triangle xyz is similar to triangle pqr, we must calculate the ratios of corresponding sides. This is done using the formula:

Ratio of sides = (Side length x) / (Side length y)

We can calculate the ratios for each side of the triangles and compare them. If the ratios are equal for all sides, then the triangles are similar. For example, if the ratio of side x to side y in triangle xyz is equal to the ratio of side p to side q in triangle pqr, then the triangles are similar. If the ratios are not equal for all sides, then the triangles are not similar.

We can use the Pythagorean Theorem to determine if the triangles are not only similar, but also congruent. The Pythagorean Theorem states that a2 + b2 = c2, where c is the longest side and a and b are the other two sides. If the Pythagorean Theorem holds true for both triangles, then the triangles are not only similar, but also congruent.

Learn more about triangle here:

https://brainly.com/question/2773823

#SPJ4

The linear system l has one solution. This can be determined by examining the augmented matrix to find the row echelon form. The row echelon form is a matrix with zeroes below the leading entries and all the leading entries are in different columns.

By converting the augmented matrix into the row echelon form, we can identify the number of variables and the number of equations. Since there are three equations and three variables in the row echelon form, the linear system l has one solution. The row echelon form of the given augmented matrix is

[tex]$\begin{bmatrix}1&-3&2&3\\0&-5&-9&-10\\0&0&4&5\end{bmatrix}$[/tex]

By counting the number of equations and variables in the row echelon form, it can be seen that there is only one solution for the linear system l. This is because the number of equations is equal to the number of variables, indicating that there is a single solution.

To know more about augmented matrix refer to the link  brainly.com/question/16796667

#SPJ4

the linear system l has an augmented matrix which is a row equivalent to the following. how many solutions does l have?

 [tex]$\begin{bmatrix}1&-3&2&3\\-3&8&-11&-14\\2&-7&5&7\end{bmatrix}$[/tex]

The slope of the line having the equation 4x - 3y = -3 is calculated to be

4/3

The slope of the line is gotten by rewriting the equation of the line in the standard form Ax + By = C. to equation of a line in slope intercept form which is y = mx + c

The equation of line in the problem is 4x - 3y = -3

The equation is rewritten as follows

4x - 3y = -3

-3y = -3 - 4x

Isolating y by dividing trough by -3

y = 1 + 4/3 x

y = 1.33x + 1

comparing with y = mx + c where m is the slope we can see that m = 4/3

Learn more about slope of a line at:

https://brainly.com/question/16949303

#SPJ1

The equation in slope-intercept form for this line is y = -5/4x + 3.

What is the slope-intercept form of the line?

The slope-intercept form is a way of representing the equation of a straight line in the form y = mx + b, where m is the slope of the line and b is the y-intercept (the point at which the line crosses the y-axis). The slope of a line represents the steepness of the line, and the y-intercept represents the point at which the line crosses the y-axis.

A line can be represented by two points (x1, y1) and (x2, y2) the slope can be calculated by the formula:

m = (y2 - y1) / (x2 - x1)

In this case, the line passes through the point (-8, -9) and has a slope of -5/4, we can use the point-slope form of the equation of a line to find the equation of this line:

y - y1 = m(x - x1)

y - (-9) = (-5/4)(x + 8)

y = (-5/4)x + (-9) + (2*9)

y = (-5/4)x + 3

Hence, the equation in slope-intercept form for this line is y = -5/4x + 3.

To learn more about the slope-intercept form, visit:

https://brainly.com/question/22057368

#SPJ1

The linear functions for each diagonal are given as follows:

The slope-intercept definition of a linear function is given as follows:

y = mx + b.

In which:

For diagonal BD, the points are given as follows:

D(-3,-3) and B(3,3).

The slope is given by the change in y divided by the change in x, hence:

m = (3 - (-3))/(3 - (-3)) = 1.

Hence:

y = x + b.

When x = 3, y = 3, hence the intercept b is given as follows:

y = x.

The diagonals are perpendicular, meaning that the multiplication of their slopes is of -1, hence the slope of AC is of:

m = -1.

Hence:

y = -x + b

When x = -3, y = 3, hence the intercept b is given as follows:

3 = 3 + b

b = 0.

Hence the equation is:

y = -x.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

Since lim a n/b n does not exist, it means that the ratio between a n and b n can be larger or smaller depending on the terms.

This implies that the rate of growth of a n and b n are not necessarily the same. If the series b n diverges, it means that the terms of b n increase without bound. Therefore, the terms of a n will also increase without bound, and sum a n will also diverge.

Formally, if lim a n/b n = ∞, then ∑ a n is divergent. We can prove this by contradiction. Suppose ∑ a n converges. Then by the comparison test, lim a n/b n must converge and be finite, which is a contradiction. Therefore, ∑ a n must diverge.

Learn more about comparison test here:

https://brainly.com/question/14620125

#SPJ4

Answer: The sum is -15

Step-by-step explanation:

Answer: The area of the floor can be found by multiplying the width and the length.

Area of the floor = (6x - 9)(6x + 9) = 36x^2 - 63x - 81

The area of each tile can be found by evaluating the expression 24x^2 - 12x - 36.

Area of each tile = 24x^2 - 12x - 36

To find out how many tiles are needed to cover the floor we need to divide the area of the floor by the area of each tile.

Number of tiles needed = (36x^2 - 63x - 81) / (24x^2 - 12x - 36)

The division is simplified by canceling out common factors between the numerator and denominator, the number of tiles is a fraction that can't be simplified any further.

So the answer is (36x^2 - 63x - 81) / (24x^2 - 12x - 36) tiles are needed to cover the floor.

Step-by-step explanation:

For the creation of y, we first need to know the placement of the numbers and then write an R code to create a subset for the same.

To create another vector y which contains all the numbers between 3 and -3 in order of appearance, we first need to know exactly what is the order of the appearance of 3 and -3.

Hence we will write the R code

which(x == 3)

which(x == -3)

These commands will return us the specific position of the numbers 3 and -3

Let us assume that 3 is the fourth number and -3 is the 31st number. Then we will write y as a function that contains the subset of x from the fourth to the 31st number as follows.

y <- x[4:31]

Typing this command will give us the required subset.

To learn more about R Programming visit

https://brainly.com/question/29672563

#SPJ4

Complete Question

Let x be a numeric vector and suppose you want to extract all the entries of x that are between -3 and 3 (including both boundaries -3 and 3). Create a new vector y which consists of all entries of x between -3 and 3 (including -3 and 3), in order of appearance as in vector x. For example, if X = c(-5, 7, 9, 3, 14, 9, 5, 10, -2, 0, 12) then, printing y should read у [1] 0 3 -2 0

The equations for the sides of the parallelogram would be

8x - 6 = 9x

y + 10 = 11y

Option (A) and (C) are correct.

What is a parallelogram?

A parallelogram is a four-sided shape with opposite sides that are parallel and congruent. In other words, opposite sides of a parallelogram are of equal length and parallel to each other. Additionally, opposite angles in a parallelogram are also congruent. It has two pairs of parallel sides. It can be thought of as a rectangle with opposite sides that are not necessarily at right angles to each other.

As the property of the parallelogram says

"Opposite sides of the parallelogram are equal"

So we can write

8x - 6 = 9x

y + 10 = 11y

Hence, The equations for the sides of the parallelogram would be

8x - 6 = 9x

y + 10 = 11y

Option (A) and (C) are correct.

To learn more about the parallelogram, visit:

https://brainly.com/question/970600

#SPJ1

Answer:

Step-by-step explanation:

(0, 7) and (-1, 6)

i took from

https://brainly.com/question/1502195

Answer:

45 fewer chapter books

Step-by-step explanation:

Picture books: 27 x 11= 297

Chapter books: 21 x 12= 252

297-252= 45

The solutions when the function f(x) = g(x) is x = -3 and x = -1, since the output of the function is similar.

With the condition that each input is associated to exactly one output, a function is a relationship between a collection of inputs and a set of allowed outputs. A mapping from A to B will only be a function if every element in set A has one end and only one image in set B. Let A & B be any two non-empty sets.

As we can observe from the given table, the two values for which the two function produce a similar output are at x = -3 and x = -1.

Hence, the solutions when the function f(x) = g(x) is x = -3 and x = -1, since the output of the function is similar.

Learn more about function here:

https://brainly.com/question/12431044

#SPJ1

only C) The diagonals bisect each other, and E) The diagonals are perpendicular are the two conditions that prove that a quadrilateral is a rectangle.

What is the quadrilateral?

A quadrilateral is a four-sided polygon, which means it has four straight edges and four angles. Quadrilaterals can come in many different shapes and sizes and can be classified based on their properties. Some common examples of quadrilaterals include squares, rectangles, parallelograms, rhombi, and trapezoids.

A quadrilateral is a rectangle if it satisfies the following conditions:

C) The diagonals bisect each other.

E) The diagonals are perpendicular.

A) Both pairs of opposite sides are congruent, is not a necessary condition for a quadrilateral to be a rectangle, as a rectangle can have different side lengths.

B) One pair of opposite sides is longer than the other pair of sides, is not a necessary condition for a quadrilateral to be a rectangle, as a rectangle can have equal side lengths.

D) The diagonals are congruent, is not a necessary condition for a quadrilateral to be a rectangle, as a rectangle can have diagonals of different lengths.

So, only C) The diagonals bisect each other, and E) The diagonals are perpendicular are the two conditions that prove that a quadrilateral is a rectangle.

To learn more about quadrilateral, Visit

https://brainly.com/question/23935806

#SPJ1

The federal income tax withheld for Doug, given the fact Doug is married and claims 1 allowance is $ 149.

Using the Married Persons Weekly Payroll table, you can find the bracket that Doug Smalley belongs in which is $1, 350 - $ 1, 360.

When looking at this bracket, we see that the federal income tax withheld for a person in this bracket, who claims 1 withholding allowance, is $ 149.

The federal income tax for Doug Smalley who earns $ 1, 352.75 a week in 2016, is therefore $ 149.

Find out more on federal income tax at https://brainly.com/question/28958891

#SPJ1

The full question is:

Use the Married Persons Weekly Payroll table to find the federal income tax withheld. Doug smalley, a meteorologist, is married, earns $1,352.75 a week, and claims 1 allowance.

The required  inequality to represent the possible number of cakes sold ​is Cupcakes ≥ 144.

The idea of inequality, which is the state of not being equal, especially in terms of status, rights, and opportunities1, is at the core of social justice theories. However, because it frequently has diverse meanings to different people, it is prone to misunderstanding in public discourse.

Write an inequality to illustrate the potential amount of cakes sold if the business sold 144 cupcakes. ​

So,

Bakery can sold 144 cupcakes and more

Cupcakes ≥ 144

Thus, required inequality is Cupcakes ≥ 144.

To know more about inequality visit:

brainly.com/question/30228778

#SPJ1

Based on equation 750=40x, the value of x is 18.75 weeks.

An equation is a mathematical statement that two or more algebraic expressions are equal or equivalent.

Equations must have the equation symbol (=) to show the equality of the mathematical expressions.

Equations are started with let statements, defining the variables.

Let the total amount of money in the account = y (in dollars)

Let the number of weeks Reuben has been adding money = x

750 = 40x

40x = 750

x = 18.75 (750/40)

Thus, based on the solution to the equation, we know that Reuben has added money into the account for 18.75 weeks.

Learn more about equations at https://brainly.com/question/17145398

#SPJ1

Compute the number of weeks Reuben has been putting money into the account.

The best interpretation for the given standard deviation as per given information is given by :

Option D. On an average, the number of breakdowns per day varies from the mean by about 0.28.

As given in the question,

Therefore, the best interpretation of standard deviation is :

Option D. On an average, the number of breakdowns per day varies from the mean by about 0.28.

The above question is incomplete , the complete question is:

The quality control manager at a factory records the number of equipment breakdowns each day. Let the random variable Y represent the number of breakdowns in one day. The standard deviation of Y is 0.28. Which of the following is the best interpretation of the standard deviation?

A. The number of breakdowns on a randomly selected day is expected to be 0.28.

B. The number of breakdowns on a randomly selected day will be 0.28 away from the mean.

C. The average number of breakdowns per day for a random sample of days is expected to be 0.28

D. On average, the number of breakdowns per day varies from the mean by about 0.28.

E. The number of breakdowns per day for a random sample of days is expected to be 0.28 away from the mean.

Learn more about standard deviation here

brainly.com/question/23907081

#SPJ4

For your data, the regression equation for Y is:

Y = 2.09697X - 0.55152

A linear function in mathematics is one that has either one or two variables and no exponents. It is a function with a straight line as its graph.

Given, a data set

x: -5, -3, 4, 1, -1, -2, 0, 2, 3, -4

y: -10, -8, 9, 1, -2, -6, -1, 3, 6, -8

Sum of X = -5

Sum of Y = -16

Mean X = -0.5

Mean Y = -1.6

Sum of squares (SSₓ) = 82.5

Sum of products (SP) = 173

Regression Equation = Y = bX + a

b = SP/SSₓ = 173/82.5 = 2.09697

a = Mₓ - bMₓ = -1.6 - (2.1*-0.5) = -0.55152

Y = 2.09697X - 0.55152

For x = 2.5 the value of y:

y = 2.09697* 2.5 - 0.55152

y = 4.69

Therefore, For your data, the regression equation for Y is:

Y = 2.09697X - 0.55152

Learn more about Linear Function here:

https://brainly.com/question/20286983

#SPJ1

Answer: The given equations are not valid because there is no equal sign between the first and second equation. If you are trying to solve a system of equations it should be in the form of

3x + 5y = - 9

-6x - 5y = 18

You can solve for x and y by using different methods such as substitution, elimination or graphing.

In this case, you can add the first equation to the second equation:

3x + 5y = -9

-6x - 5y = 18

-3x = 27

x = -9

Now you can substitute this value of x into one of the equations to find the value of y.

3x + 5y = -9

3(-9) + 5y = -9

-27 + 5y = -9

5y = 18

y = 3.6

So, the solution is x = -9 and y = 3.6

It's important to check your solution by substituting the values of x and y in the original equations to make sure that the solution is consistent.

Step-by-step explanation:

Answer:

Temperature.

Step-by-step explanation:

The temperature of the water depends on the minutes the water is in the freezer. If the water is frozen for longer, the water will be colder and if the water is frozen for less time, the water will be less cold.

The ordered pair that lies on the graph of the equation is (1, 2)

From the question, we have the following parameters that can be used in our computation:

y = 2x

The point in the ordered pair lies on the graph of the equation is the solution set

Take for instance, we set x = 2

So, we have

y = 2 * 1

Evaluate the product

This gives

y = 2

When repesented as an ordered pair, we have

(1, 2)

Hence, the point is (1, 2)

Read more about linear equation at

https://brainly.com/question/2030026

#SPJ1

The level of measurement used for the temperature is given as follows:

Interval.

There are four levels of measurement for the data, given as follows:

The measures of central tendency for each level are given as follows:

For the temperature, we obtain the arithmetic mean, hence it has the level of measurement of interval.

More can be learned about level of measurement at brainly.com/question/17227965

#SPJ1