You are studying circular motion by placing pennies on a turntable and then turning it on so that it will spin. You keep increasing the speed until one of the pennies slips off. You repeat this procedure and observe that the penny close to the outer edge always slip off first. What is the best inference?

1.The penny near the edge has a greater tangential velocity than the one in the center, so it experiences more air resistance. It’s the effect of the air “blowing” it off.

2.The centripetal force required to keep the pennies in place increases with the distance from the center. Eventually, as the turntable spins faster, the friction force between the turntable and the penny near the edge is not enough to supply the required centripetal force.

3.The centrifugal force acting on the pennies is stronger on the one near the edge than the one near the center.

Answer:

The force is [tex]F_b =  216 \  N [/tex]

Explanation:

From the question we are told that

   The  mass of the bungee jumper is  m  = 80 kg

    The spring constant is  [tex]k = 20 \ N/ m[/tex]

    The extension of the rubber bungee cords is  x = 50 m

Generally the weight of the jumper is

      [tex]W =  m *  g[/tex]

=>   [tex]W =  80 *  9.8 [/tex]

=>   tex]W =  784  \  N  [/tex]

Generally  the returning force of the rubber bungee cords is mathematically represented as

      [tex]F  =  k  *  x[/tex]

=>     [tex]F  =  20   * 50 [/tex]

=>     [tex]F  =  1000 \  N [/tex]

The force to be applied by the bear is

    [tex]F_b =  F -  W[/tex]

=>    [tex]F_b =  100 -  784[/tex]

=>  [tex]F_b =  216 \  N [/tex]

Answer:

C. Some social patterns are helpful, while others are harmful.

Explanation:

Hope this was helpful, Have an amazing,spooky Halloween!!

Answer: The correct answer is A) The track was not level and was tilted slightly downward.

Explanation: This is because of the two values: 0.4 kg and 0.5 kg. I won't go into much detail but due to this difference of mass, we know that the track was not level.

"The track was not level and was tilted slightly downward" could explain the difference in the mass.

Thus Option A is appropriate.

Learn more:

https://brainly.com/question/11839345

Answer:

1,839.375 Joules

Explanation:

Work is said to be done is the force applied to an object cause the object to move through a distance.

Workdone = Force * Distance

Workdone = mass * acceleration due to gravity * distance

Given

Mass = 75.0kg

acceleration due to gravity = 9.81m/s²

distance = 2.50m

Substitute the given parameters into the formula:

Workdone = 75.0*9.81*2.50

Workdone = 1,839.375Joules

Hence the workdone is 1,839.375 Joules

Answer:

The region where an electron is most likely to be is called an orbital. Each orbital can have at most two electrons. Some orbitals, called S orbitals, are shaped like spheres, with the nucleus in the center.

Explanation:Hope this helps :)

By definition, a region around the nucleus of an atom where electrons are likely to be found​ is called an orbital.

First of all, an atom is the smallest constituent unit of ordinary matter that has the properties of a chemical element.

All atoms are made up of subatomic particles: protons and neutrons, which are part of their nucleus, and electrons, which revolve around them. Protons are positively charged, neutrons are neutrally charged, and electrons are negatively charged.

In other words, every atom consists of a nucleus in which neutrons and protons meet and energy levels where electrons are located.

This is, the atomic nucleus is the central part of the atom that is made up of protons and neutrons, while the orbitals or peripheral region is an area where electrons are found.

In summary, a region around the nucleus of an atom where electrons are likely to be found​ is called an orbital.

Learn more:

Answer:

(a)  24.56 N

(b) 142.28 N

Explanation:

(a)

The designation assigned to something like the net force pointed toward the middle including its circular route seems to be the centripetal force. The net stress only at lowest point constitutes of the strain throughout the arm projecting upward towards the middle as well as the weight pointed downwards either backwards from the center.

The centripetal function is generated from either scenario by Equation:

⇒  [tex]Fc = \frac{mv^2}{r}[/tex]

On putting the values, we get

⇒       [tex]=\frac{12\times 1.33^2}{0.864}[/tex]

⇒       [tex]=24.56 \ N[/tex]

(b)

Use T to denote whatever arm stress we can get at the bottom including its circle:

⇒  [tex]Fc = T - mg =\frac{ mv^2}{r}[/tex]

⇒  [tex]T = mg + Fc[/tex]

⇒      [tex]=12\times 9.81+24.56[/tex]

⇒      [tex]=142.28 \ N[/tex]

Answer:

In two significant figure 360K

Explanation:

The temperature difference (ΔT) can be calculated as the boiling temperature minus the freezing temperature in Fahrenheit.

Hence,

ΔT = 212 - 32

ΔT = 180°F

To convert to °F to kelvin, we use the formula below

= (°F - 32) × 5/9 + 273.15

= (180°F - 32) × 5/9 + 273.15

= 355.37K ⇔ 360K

Answer:

True.

Explanation:

        [tex]v_{avg} = \frac{\Delta x}{\Delta t}[/tex] (1)

        [tex]\Delta x} = v_{avg}* {\Delta t}[/tex]

Answer:

b. The bicyclist is exerting 49 N of force

Explanation:

Given;

mass of bicyclist start, m = 50 kg

acceleration, a = 1 m/s²

density of air, ρ = 1.2 kg/m³

velocity, v = 2 m/s

Area of the bicyclist body, A = 0.5 m²

The drag force on the bicyclist is given by ;

Fd = 0.5CρAv²

where;

C is drag coefficient = 0.9 for bicycle

Fd = 0.5 x 0.9 x 1.2 x 0.5 x 2²

Fd = 1.1 N

The force of the bicyclist is given by;

F = ma

F = 50 x 1

F = 50 N

The effective force exerted by the bicyclist is given by;

Fe = F - Fd = 50 N - 1.1 N

Fe = 49 N

Therefore, the force exerted by the bicyclist is 49 N

Answer:

4 bobux

Explanation:

one bobux

two bobux

three bobux

four bobux

Answer:

noun. a person who is connected with another or others by blood or marriage. something having, or standing in, some relation or connection to something else. something dependent upon external conditions for its specific nature, size, etc. (opposed to absolute).

Answer:

Explanation:

The work done by an object can be found by using the formula

From the question

force = 290 N

distance = 5 m

We have

workdone = 290 × 5

We have the final answer as

Hope this helps you

Answer:

The value of q is [tex]\dfrac{Q}{8}[/tex]

Explanation:

Given that,

Each charge = -Q

Distance between charges = L

Reduced force = [tex]\dfrac{F}{2}[/tex]

Suppose, Two particles each with a charge -Q are fixed a distance L apart as shown above. Each particle experiences a net electric force F. A particle with a charge +q is now fixed midway between the original two particles.

We know that,

The force on each end is

[tex]F=\dfrac{kQ^2}{L^2}[/tex]...(I)

If the charge q is placed at mid point then

The  force on each end charge is

[tex]\dfrac{F}{2}=F+F'[/tex]....(II)

We need to calculate the value of q

Using equation (II)

[tex]\dfrac{F}{2}=F+F'[/tex]

Put the value of F into the formula

[tex]\dfrac{\dfrac{kQ^2}{L^2}}{2}=k\dfrac{Q^2}{L^2}+k\dfrac{q\times(-Q)}{(\dfrac{L}{2})^2}[/tex]

[tex]\dfrac{kq(-Q)}{(\dfrac{L}{2})^2}=-\dfrac{kQ^2}{2L^2}[/tex]

[tex]\dfrac{q}{\dfrac{1}{4}}=\dfrac{Q}{2}[/tex]

[tex]q=\dfrac{Q}{8}[/tex]

Hence, The value of q is [tex]\dfrac{Q}{8}[/tex]

Answer:

D

Explanation:

Answer:

c.4s

Explanation:

Answer:

A mixture is a combination of two or more substances in any proportion. This is different from a compound, which consists of substances in fixed proportions. ... The lemonade pictured above is a mixture because it doesn't have fixed proportions of ingredients.

Explanation:

Answer:

a- More heat is required for the constant-pressure process than for the constant-volume

Explanation:

we have to solve using the thermodynamic first law. this is the heat applied to the system

dQ = dU + dW

definition of terms:

dU = change in internal energy

dW = work done

we have it that

change in internal energy dU is directly proportional to work done dW

but when we are in constant volume process, work done of the gas is zero

therefore

dQ of constant pressure is > than that of constant volume

so constant pressure process requires more heat

The process that requires more heat is the constant-pressure process than the constant-volume process.

According to the first law of thermodynamics, the heat that's applied to the system will be the addition of the change in internal energy and the work done.

In a constant-volume process, the work done on the gas is equal to zero. More heat will be required for the constant-pressure process than for the constant-volume process.

Also, it should be noted that the change in the thermal energy of the gas will be the same for the constant-pressure process and the constant-volume process.

Read related link on:

https://brainly.com/question/16951562

Answer: IM 95%sure that the answer is B jus took the test got the answer right

Explanation:

Answer:

sorry I forgot I wish I could help

Answer:

What do you mean ma´am/sir?

Explanation:

Answer:

Hyperbole

Explanation:

this is an extreme exaggeration or overstatement/ magnification

Answer:

40

Explanation:

The answer is A I Hope this answer helps you (i got the question right)

Answer:

A. As speed increases, kinetic energy increases exponentially.

Explanation:

The amount of kinetic energy an object has depends on the speed. Kinetic energy is also known as "motion energy." This being said, if speed is increasing, decreasing, or staying constant, the kinetic energy of the object will too.

Answer:

3.2

Explanation:

I hope that this helps! Have a good day!!

Answer:

Taking a look at Newton's third law of motion which states "for every force exerted, their is an opposite force equal in magnitude and opposite in direction on the first force".

Similarly if a bullet had enough forces behind it to hurl someone through the air when they were hit, a similar force would act on the person holding the gun that fired the bullet.  

What we load into the gun is called a 'cartridge' Each piece is composed of four basic substance the casing, the bullet, the primer, and the powder.  

The primer explodes lighting the powder which causes a buildup of pressure behind the bullet. This powder can be used in rifle cartages because the bullet chamber is designed to withstand greater pressures.  

It is difficult in practice to measure the forces within a gun bagel, but the one easily measured parameter is the velocity with which the bullet exits muzzle velocity, therefore assuming that even if a handgun cartridge which generate enough momentum for the bullet to do this,  it is still nonsense on screen in Hollywood and video.  

Answer and Explanation:

TL: DR The Sun is much more massive than Neptune — more than enough to make up for the somewhat smaller distance between the two planets at the closest approach.

[The surprise in this answer (to me, a non-astronomer), is that the gap between the orbits of Neptune and Uranus is large — half the distance from Uranus to the Sun.]

The ratio of gravitational attraction of the Sun on Uranus versus Neptune on Uranus is directly proportional to the ratio of the Sun’s mass to Neptune’s and inversely proportional to the ratio of the square of the distances (let’s use the closest approach of the two planets to one another to calculate a maximum attraction).

Numbers:

Sun’s mass: 2 x 10^30 kg

Neptune’s mass: 1 x 10^26 kg

Distance of Sun to Uranus: 3 x 10^9 km

Closest approach of Uranus and Neptune: 1.5 x 10^9 km

Without doing any arithmetic, we see that even at their closest approach, Uranus and Neptune are separated by about one-half of the Uranus to Sun distance. Squaring that ratio, we see that if the Sun and Neptune had the same mass, the attraction between the Sun and Uranus would only be about 1/4 of that between the Sun and Neptune; however, the Sun has 20000 times the mass of Neptune, so the attraction between Uranus and the Sun is about 5000 times stronger than the maximum attraction between Uranus and Neptune.

The explanation of the possibility of why sun exerts a greater force on Uranus than Neptune exerts on Uranus is; because the force was calculated to be greater.

The formula for calculating the Force of Gravity between two masses is:

F = G*m₁*m₂/r²

Where;

F = force of gravity

G = gravitational constant = 6.674 × 10⁻¹¹ N•m²/kg²

m₁ = mass of the larger object

m₂ = mass of the smaller object

r = the distance between the centers of the two masses

Now, from online values, we have the following;

mass of Neptune; m₁ =  102.413 × 10²⁴ kg

mass of Uranus; m₂ = 86.813 × 10²⁴ kg

average distance between the centers of Neptune and Uranus; r = 1.62745 × 10¹² m

Thus, force exerted by Neptune on Uranus is;

F = (6.674 × 10⁻¹¹ × 102.413 × 10²⁴ × 86.813 × 10²⁴)/(1.62745 × 10¹²)²

F = 2.240 × 10¹⁷ N

We are told that the force the Sun exerts on Uranus is 1.41 the force the Sun exerts on Uranus is 1.41 × 10²¹ N.

That is greater than the force Neptune exerts on Uranus.

Read more about Force of Gravity at; https://brainly.com/question/7281908

Complete Question

The complete question is shown on the first uploaded image

Answer:

The correct option is  B

Explanation:

   The number  of alphabet is  n= 4  (a , b , c , d )

Generally the total  number of  string of length 10 over the 4 alphabets is  

     [tex]N  =  4^{10}[/tex]

Gnerally the number of string of length 10 that does not include b is  

     [tex]T =  3^{10}[/tex]    

Generally the number of strings of length 10 over the 4  alphabets that have at least one alphabet b  somewhere in the string is  

        [tex]G  =  N - T[/tex]

=>    [tex]G  =  4^{10} -  3^{10}[/tex]

Answer:

luster

Explanation:

Answer:

μk = 0.58

Explanation:

       [tex]F_{apph} = F_{app} * sin\theta = 126 N * sin 25 = 53.3 N[/tex]

       ⇒  [tex]F_{n} = - F_{apph} = -53.3 N[/tex]

       [tex]F_{g} = m_{b} * g = 8.5 Kg * (-9.8 m/s2) = -83.3 N[/tex]

       [tex]F_{appv} = F_{app}* cos\theta = 126 N * cos 25 = 114.2 N[/tex]

      [tex]F_{ff} = \mu_{k}* F_{n} =\mu_{k} * (-53.3 N)[/tex]

        μk = 0.58