you have to choose more than one on this

Answer:

amplitude

Explanation:

When we increase the volume of a sound, the amplitude of the wave is increased. The frequency of a wave is related to its pitch. If the pitch is high, then the frequency of the wave is high. This means that the wave will looked squashed on an oscilloscope trace.

Answer: They Are all gas giants.

Explanation:

Answer:

A,B,C

Explanation:

because that is true

Answer:

C: Net Torque divided by Moment of Inertia

Explanation:

Torque = Moment of Inertia x Angular Acceleration.

According to Newton's second law for rotational motion, an object's angular acceleration equals the net torque multiplied by the moment of inertia, not divided by it. The correct answer is (A)

Mathematically, it can be expressed as:

Angular acceleration (α) = (Net torque (τ) / Moment of inertia (I))

Where:

α = angular acceleration (measured in rad/s²)

τ = net torque (measured in Nm or kgm²/s²)

I = moment of inertia (measured in kgm²)

This equation shows that the angular acceleration of an object is equal to the net torque applied to it divided by its moment of inertia. So, the correct answer is (A) net torque multiplied by the moment of inertia.

To summarize, Newton's second law for rotational motion states that the angular acceleration of an object is directly proportional to the net torque applied to it and inversely proportional to its moment of inertia. The moment of inertia represents an object's resistance to changes in its rotational motion, while the net torque represents the total rotational force acting on the object.

To know more about Newton's second law:

https://brainly.com/question/34706880

#SPJ3

Answer:

4500 N

Explanation:

F = ma

   = 1500 kg * 3 m/s^2 = 4500 N

edited to correct units !

The destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].

Destructive interference happens when the maxima of two waves are 180° out of phase a positive displacement of one wave is canceled exactly by a negative displacement of the other wave.

The formula for brighter patches resulting from constructive interference and darker patches resulting from destructive interference in a diffraction grating is:

[tex]\rm d sin \theta = n \lambda[/tex]

The grating spacing is denoted by d, the angle of light is denoted by a the fringe order is denoted by n, and the wavelength is denoted by [tex]\rm \lambda[/tex].

The destructive interference formula is now based on the fact that destructive interference occurs between the fringes.

Hence the destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].

To learn more about destructive interference refer to the link;

https://brainly.com/question/16098226

Answer:

A. dsin  =

Explanation:

In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion..

Speed of light is the distance per time light waves propagate through different materials. The value for the speed of light in a vacuum is now defined as exactly 299,792,458 metres per second.

Therefore, In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion

Learn more about speed of light here.

https://brainly.com/question/104425

The forward force you exert on the fish and your backward action will allow you to reach the shore.

Newton's third law of motion states that for every action, there is an equal and opposite reaction.

Fa = -Fb

Let's assume the fish is held in the hook, this will give you the opportunity to throw the fish forward while still holding it.

When the the fish is thrown forward, you will move backwards with an equal force based on Newton's third law. Your backward momentum towards the shore will help to maintain equal linear momentum between you and the fish.

Thus, this forward force of the fish and your backward action will allow you to reach the shore.

Learn more Newton's third law of motion here: https://brainly.com/question/25998091

For E = 200 gpa and i = 65. 0(106) mm4,  the slope of end a of the cantilevered beam  is mathematically given as

A=0.0048rads

Generally, the equation for the   is mathematically given as

[tex]A=\frac{PL^2}{2EI}+\frac{ML}{EI}[/tex]

Therefore

A=\frac{10+10^2+3^2}{2*240*10^9*65*10^6}+\frac{10+10^3*3}{240*10^9*65*10^{-6}}

A=0.00288+0.00192=0.0048rads

A=0.0048rads

In conclusion,  the slope is

A=0.0048rads

Read more about Graph

https://brainly.com/question/14375099

The value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.

The formula used to find the slope at the end of the cantilevered beam is,

[tex]A=\dfrac{PL^2}{2EI}+\dfrac{ML}{EI}[/tex]

Here, (M) is the momentum, (EI) is flexural rigidity, (P) is concentrated load and (L) is the length of the beam.

Concentrated load is 10 KN and uniform load is 3 kN/m. E = 200 gpa and i = 65. 0(106) mm4.

[tex]A=\dfrac{10+10^2+3^2}{2\times240\times10^9\times65\times10^6}+\dfrac{10+10^3\times3}{240\times10^9\times65\times10^{-6}}\\A=0.00288+0.00192A=0.0048 \rm\; rads[/tex]

Thus, the value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.

Learn more about the cantilevered beam here;

https://brainly.com/question/19090244

#SPJ4

Heart rate is given by

Convert to per second

Now

Frequency:-

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5}[/tex]

[tex]\\ \rm\rightarrowtail \nu=0.4Hz[/tex]

Answer:

Time domain and frequency domain

Answer:

-18,750N

Explanation:

90x1000

-------------

3600

u=25m/s

v=0m/s

v^2=u^2+2as

v=0

=625+(2×a×20)

625+40a

-625=40a

a= -15.625 m/s^2

F=ma

=(1200)(-15.625)

= -18,750N

Answer:

the Moon is smaller in diameter than the United States

however. The United States is 2,545 km / 1,582 mi from north to south, and thus, the Moon is smaller across than the United States is wide.

Answer:

The moon is smaller than the earth.

Explanation:

Moon's Diameter is 2,159.1 mi

Earth's Diameter is 7,917.5 mi

[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{l}{g}}[/tex]

[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{4}{9.8}}[/tex]

[tex]\\ \rm\rightarrowtail T=2\pi(0.63887)[/tex]

[tex]\\ \rm\rightarrowtail T=1.27774\pi [/tex]

[tex]\\ \rm\rightarrowtail T=4.012s[/tex]

Answer:

Rolling friction

Explanation:

Option B is correct

Hi there!

We can use Ohm's law to solve:
[tex]V = IR[/tex]

V = Potential Difference (V)
I = Current (A)
R = Resistance (Ω)

We can rearrange the equation to solve for resistance:

[tex]R = \frac{V}{I}[/tex]

Plug in the given values to solve.  

[tex]R = \frac{10}{2} = \boxed{5 \Omega}[/tex]

Answer:

Current for 12 ohms = 2.5

Explanation:

Ohm's Law:

Voltage = IR

Current = V/R

Resistance = V/I

Therefore, current = 30V/12 Ohms

30/12 = 2.5

So current for 12 ohms = 2.5

I hope this helps :>

Answer:

This repulsion would be reduced to one-quarter of its former value.

Explanation:

hope this helps. (MARK ME BRAINLIEST, please.)

Answer:

I don't know

Explanation:

you need then search here

The half life is the time taken for half the number of radioactive atoms originally present to remain. This is  the time that corresponds to exactly half of the original number of radioactive isotopes remaining in the system.

The half life is the time taken for half the number of radioactive atoms originally present to remain. We can plot the number of atoms against the time taken in a graph.

We can obtain the half life of the radioactive isotope from the graph by noting the time that corresponds to exactly half of the original number of radioactive isotopes remaining in the system.

Learn more about radioactive isotopes: https://brainly.com/question/772406

The heat capacity of the silver spoon at the given temperature difference is 817.65 J.

The heat capacity of theb silver spoon is the quantity of heat absorbed by the silver spoon. The heat capacity of the silver spoon at the given temperature difference is calculated as follows;

Q = mcΔθ

where;

Q = 50 x 0.237 x (89 - 20)

Q = 817.65 J

Thus, the heat capacity of the silver spoon at the given temperature difference is 817.65 J.

Learn more about heat capacity here: https://brainly.com/question/16559442

[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]

Answer:

the anwser is atp

Explanation:

To move substances against a concentration or an electrochemical gradient the cell must use energy. This energy is harvested from ATP that is generated through cellular metabolism. Active transport mechanisms, collectively called pumps or carrier proteins work against electrochemical gradients.

The energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.

The passive transport is the shifting or transfer of a solute from a place where the electrochemical potential is high to a place where the electrochemical potential is low.

Energy require for passive transport-

Thus, the energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.

Learn more about the passive transport here

https://brainly.com/question/25802833

#SPJ4

If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.

The principle of conservation of linear momentum states that, the total momentum of an isolated system is constant.

The downward velocity of thes gases is calculated as follows;

v1(m1 + m2) = v2(m2)

305(1000 + 25) = v2(25)

312,625 = 25v2

v2 = 312,625/25

v2 = 12,505 m/s

Thus, If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.

Learn more about linear momentum here: https://brainly.com/question/7538238

The maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.

The peak current of an ac source is the amplitude current flowing in the ac circuit.

The magnitude of the peak  current is calculated as follows;

I₀ = i/(sin ωt)

I₀ = i/(sin 2πft)

where;

i = I₀ x sin 2πft

From the equation above, as the frequency of the of the ac voltage source increases, the value of the ac current (i) increases.

Thus, the maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.

Learn more about ac current here:  https://brainly.com/question/10715323

#SPJ1

The temperature difference between the wooden wall is 16⁰C, and the heat current per square metre of the wall is 7,325 W/m².

The temperature difference between the wooden wall is calculated as follows;

[tex]\frac{dQ_A}{dt } = \frac{dQ_B}{dt} \\\\\frac{K_A \Delta T_A \times A}{L_A} = \frac{K_B \Delta T _B \times A}{L_B}\\\\\frac{K_A \Delta T_A }{L_A} = \frac{K_B \Delta T _B}{L_B}\\\\\frac{0.5 \times 20}{0.1} = \frac{0.125 \times \Delta T _B }{0.02} \\\\100 = 6.25\Delta T _B\\\\\Delta T _B = \frac{100}{6.25} \\\\\Delta T _B = 16 \ ^oC[/tex]

Q = KL(ΔT)

Q = 0.5 x 0.1 x (20 + 273)

Q = 14.65 W

QA = W/A

QA = (14.65)/A

QA = 14.65/0.002

QA = 7,325 W/m²

Learn more about thermal conductivity here: https://brainly.com/question/11213835

Gravity

when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.

Answer:

Gravity

Explanation:

The splashing of liquid resembles like an oscillation .

The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction

Answer:

D. P=1.2 kw, T=6kwh

Explanation:

P = A × V

P = 120×10

= 1200 watts or 1.2 kw

T = Watts × hr

1000

= 1200 × 5

1000

= 6 kwh

Answer:

All soft drinks contain water. When soft drink bottles are chilled in sub-zero temperatures, the water on account of its anomalous expansion expands. Thus, to provide space for expanding water, soft drink bottles are not completely filled as otherwise they will burst.

Explanation:

Answer:

Soft drink bottles are filled leaving some space between the lid/cap and the liquid level.

Explanation:

The reason is that the soft drinks are cooled below room temperature.  Sometimes they are kept in the hot Sun and weather.  They are subject to a big temperature variation.  Also, there are gases like CO2 mixed in the drink.  So the gases come out of the liquid and expand due to heat.  That creates high pressure.

Water expands when it is cooled to 4 deg. C.  But the bottle (glass) contracts when it is cooled.  So if there is no air gap,  then volume of water (cool drink) will become more than the inside volume of the bottle.  Then the bottle will break due to pressure from water expansion around 8 deg. to 4 deg.C.

When a bottle is opened, due to pressure difference, and temperature difference, the gases come out of drink in the form of bubbles.  So cold drink overflows out.

Also, the soft drink bottles are capped tightly.  When an opener is used to open it using some force upwards, the pulling force also moves the soft drink bottle upwards.  So just after the lid comes off, the top part of the drink comes out due to the pull.  So some drink spills on people who open or, it falls outside.

In order to prevent these problems, some gap is left open between the surface of the soft drink and the top of the bottle.