you need to make a 0.45% sodium chloride solution. the pharmacy has 1,000 ml of 0.9% sodium chloride in stock. calculate the final quantity of the 0.45% sodium chloride solution that can be made from the stock solution.

Answers

Answer 1

Sodium chloride solution that can be prepared from the stock solution is 2,000 mLA.

A 0.45% sodium chloride solution needs to be prepared. A 1,000 ml supply of sodium chloride 0.9% is available at the drugstore. As directed by your doctor, the final amount of the 0.45% sodium chloride solution that can be prepared from the stock solution is 2,000 mLA. This solution is typically supplied by injection into a vein. It can be given at home, in a doctor's office, or in a hospital. If you intend to use this product at home, ask your health care practitioner for all preparation and usage instructions. Check the product visually for any specks or dis-coloration before using. In the event of either, do not use the liquid. If you intend to combine this solution with another medication, check with your doctor or pharmacist first before acting, do this. Find out how to handle and dispose of medical supplies properly. Your age, weight, health, and how you respond to treatment all go into the dosage.

Learn more about Treatment here:

brainly.com/question/15706752

#SPJ4


Related Questions

youtibe aleks initially there are 3.4 mol of a and 7.5 mol of b in a 20.0 l container. if there is 0.57 mol of a at equilibrium, what is the value of kp?

Answers

The value of the Kp is 0.0036.

Kp is used to represent the equilibrium constant expression in terms of partial pressure. Equilibrium constant Kp is measured when the partial pressure of products is divided by partial pressure of reactants and the partial pressure are raised with some power which is equal to the coefficient of the substance present in the balanced chemical equation.

                      A    +     B     ⇆     2C

t = 0              3.4         7.5            0

Equilibrium  3.4 - x     7.5 - x      2x

According to the question,

2x = 0.57

⇒ x = 0.57/2 = 0.285

Kc = (2x)²/{(3.4 - x) (7.5 - x)}

⇒Kc = (0.285)²/(3.115 × 7.215)

⇒Kc = 0.081225/22.47425

⇒Kc = 0.0036

The given question is incomplete so I have answered it on general basis.

Learn more about Equilibrium constant from the link given below.

https://brainly.com/question/9238135

#SPJ4

An element has 2 isotopes: 6X at 7.59% and 7X at 92.41%. What is the average atomic mass?
Record answer to the hundredths (2 decimals):

i’ll give brainliest

Answers

Answer: An element has 2 isotopes: 6X at 7.59% and 7X at 92.41%. What is the average atomic mass?

Explanation:

In a bid to  calculate the average atomic mass, we  multiply the fraction of each isotope by the mass number , then add them together.

This is more like weighted average, as shown below:

average atomic mass=(mass number of first isotope*fraction)+(mass number of second isotope*fraction)

average atomic mass=(6X*7.59%)+(7X*92.41%)

average atomic mass= 6.92X

Consider the reaction:

2NO(g) + O2(g) + 2NO2(g)

Given an initial mass of 16. 07 g NO, an excess of Oz, and assuming that all of the reactant is converted to product(s), and none is lost, calculate the mass (g) of NO2 produced

by the reaction.

Answers

The mass of NO2 produced by the reaction is 24.61g when the initial mass of 16.07g NO, an excess of O2 is converted to product NO2.

Given the chemical reaction: 2NO(g) + O2(g) + 2NO2(g)

The equation is balanced.

The initial mass of NO is (m) = 16.07g

Here first we calculate the number of moles of NO is used = mass/Molar mass of NO

moles of NO used = 16.07/30 = 0.535

An excess of O2 is used so we can neglect that.

Now calculate the moles of NO2 produced.

moles of NO2 =  0.535 x 2 mol(NO2) / 2mol(NO) =  0.535

we can determine that NO is the limiting reactant.

To convert from moles to mass, use the product's molar masses.

Molar mass of NO2 = 46g/mole

Then the mass of NO2 produced = 0.535 x 46 x 1 = 24.61g

Hence the mass of NO2 produced by the reaction is 24.61g

To learn more about reactant click here https://brainly.com/question/17096236

#SPJ4

3 Ca(OH)2 + 2 H3PO4 → 6 H2O + Ca3(PO4)2

How many moles of H2O would be produced if 5.2 moles of H3PO4 are reacted with excess calcium hydroxide?

2.6 moles H2O
11 moles H2O
15.6 moles H2O
7.8 moles H2O

Answers

Answer:

15.6 moles

Explanation:

For every 2 moles of H3PO4 that is reacted, 6 moles of H2O are produced.

So if 5.2 moles of H3PO4 are reacted with calcium hydroxide, calculate the moles of H2O produced by this:

5.2 moles H3PO4 * (6 moles H2O / 2 mole H3PO4) = 15.6 moles H2O

Therefore 15.6 moles of H2O would be produced if 5.2 moles of H3PO4 are reacted with calcium hydroxide.

In the SI system of units, the mole is one of seven base units. It is frequently used in
chemical calculations. However, a mole of something is just a particular quantity of it, It
unit of measure in the way that meters, seconds, and kilograms are,
Calculations performed with the number of moles of a substance could also be
performed with the number of particles of a substance, Based on this information, do
you think that the mole should be considered a base unit in the Sl system? Explain why
or why not

Answers

The fact that the amount of substances is fundamental means that its unit, the mole should be a base unit.

What is the SI system?

We have to know that the SI unit is the internationally accepted unit that we can be able to use to obtain the quantities that are basic in physics. We know that there are some units that we call the base units.

The reason why we call them the base units is because all other computations are based on them. The mole should be a base unit because the mole deals with the amount of substance which is quite fundamental in science.

Learn more about mole:https://brainly.com/question/26416088

#SPJ1

Please match the following.

Answers

Volume of one mole of gas at STP = 22.4 L

number of particles in one mole of any substance = 6.022 ×10²³

What is the mass of 9.30 mole of SiH₄ = 298.81

What is a mole?

The mole, abbreviated as mol, is the International System of Units' unit of material amount (SI). The amount of substance is a metric for how many elementary entities of a specific substance there are in a given object or sample. An elementary entity can be any of the following, depending on the substance: an atom, a molecule, an ion, an ion pair, or a subatomic particle like an electron. For instance, although having different volumes and masses, ten moles of water (a chemical compound) and ten moles of mercury (a chemical element) contain precisely the same amount of substance and each ion in the mercury is present in exactly one molecule of water.

To learn more about mole from the given link

https://brainly.com/question/26416088

#SPJ4

how does excessive burning of fossil fuels affect our planet

Answers

Excessive burning of fossil fuels such as coal, oil, and natural gas can have a significant impact on our planet. The primary way in which burning fossil fuels affects the planet is through the release of greenhouse gases, such as carbon dioxide (CO2) into the atmosphere.

These gases trap heat from the sun, which causes the Earth's temperature to rise, a phenomenon known as global warming. This can lead to a variety of negative effects, such as:

Climate change: The increase in temperature can cause more frequent and severe weather events such as heat waves, droughts, and floods. It can also cause sea levels to rise and glaciers to melt, leading to coastal flooding and changes in precipitation patterns.

Loss of biodiversity: Warmer temperatures can cause species to migrate or die out, leading to a loss of biodiversity. Changes in precipitation patterns can also affect the survival of certain species.

Ocean acidification: The ocean absorbs a large amount of CO2, which can cause the pH of seawater to decrease, making it more acidic. This can harm marine life, especially those that have shells or skeletons made of calcium carbonates, such as coral and certain types of plankton.

Learn more about global warming here:

https://brainly.com/question/12908180

#SPJ4

if we have 325 g of glucose and 137 g o 2 , what is the limiting reagent, and what mass of co 2 will be produced?

Answers

If we have 325 grams of glucose and 137 grams of oxygen, the limiting reagent is oxygen. The mass of carbon dioxide that will be produced is 137 grams.

This means that the reaction will be limited by the amount of oxygen available, and not by the amount of glucose. The mass of carbon dioxide that will be produced will be equal to the mass of oxygen used in the reaction. In this case, 137 grams of carbon dioxide will be produced.

The reaction can be written as: glucose + oxygen --> carbon dioxide + water. This equation shows that for every molecule of glucose, 6 molecules of oxygen are needed to produce 6 molecules of carbon dioxide and 6 molecules of water.

Therefore, the amount of carbon dioxide produced will depend on how much oxygen is available. In this case, 137 grams of oxygen is available, so 137 grams of carbon dioxide will be produced.

To learn more about glucose, click here:

https://brainly.com/question/2396657

#SPJ4

URGENT: What is the original concentration of a Strontium Hydroxide Solution with a pH of 13. 22?

Answers

The concentration of the strontium hydroxide, Sr(OH)₂ solution is 0.083 M.

What is the pH of a solution?

The pH of a solution is a measure of the molar concentration of hydrogen ions in the solution and as such is a measure of the acidity or basicity of the solution.

The letters pH stand for "power of hydrogen" and the numerical value is defined as the negative base 10 logarithms of the molar concentration of hydrogen ions.

Mathematically;

pH = - log [H⁺]

pOH = 14 - pH

where;

[H⁺] = concentration  of hydrogen ions

[OH⁻] = concentration of hydroxide ions

pOH = 14 - 13.22

pOH = 0.78

The concentration of hydroxide ions in the solution is:

[OH⁻] = 10⁻⁰°⁷⁸

[OH⁻] = 0.166 M

The concentration of the strontium hydroxide, Sr(OH)₂ solution = 0.166/2 M

The concentration of the strontium hydroxide, Sr(OH)₂ solution = 0.083 M

Learn more about pH at: https://brainly.com/question/172153

#SPJ1

How many moles of H2O are formed?

Answers

The number of moles of water that are produced from the reaction of the combustion of 0.20 moles of ethane, C₂H₆ is 0.6 moles.

What number of moles of water are produced from the reaction of the combustion of 0.20 moles of ethane, C₂H₆?

The number of moles of water that are produced from the reaction of the combustion of 0.20 moles of ethane, C₂H₆ is obtained from the mole ratio as given in the equation of the reaction.

The equation of the reaction is given below as follows:

2 C₂H₆ + 5 O₂ ---> 2 CO₂+ 6 H₂O

From the equation of the reaction, 6 moles of water are produced from the combustion of 2 moles of ethane.

The mole ratio is 1 : 3

The number of moles of water produced from 0.2 moles of ethane = 0.2 * 3 moles

The number of moles of water produced = 0.6 moles

Learn more about mole ratio at: https://brainly.com/question/26023

#SPJ1

Complete question:

How many moles of H₂O is formed from 0.20 moles of C₂H₆?

Equation of the reaction: 2 C₂H₆ + 5 O₂ ---> 2 CO₂+ 6 H₂O

The total number of sodium atoms in 46.0 grams of sodium is

Answers

Given,

Amount of sodium atoms = 46 grams

To find,

The total number of sodium atoms present in the given amount of sodium atoms.

We can simply solve this numerical problem by using the following process:

As per stoichiometry;

1 mole of any element contains Avogadro's number of atoms, that is, 6.022 x 10^23 atoms.

And, the molar mass of any element is equal to the atomic mass of the same element.

=> If the given amount of an element/compound is equal to its molar mass, then it contains 6.022 x 10^23 atoms/molecules.

=> Total number of atoms/molecules present in the given amount of the element/compound

= (total given mass)/(molar mass) x 6.022 x 10^23

Now,

the molar mass of sodium = 23 grams

Total number of sodium atoms present in the given amount of sodium atoms

= (total mass)/(molar mass) x 6.022 x 10^23

= 46 grams / 23 grams x 6.022 x 10^23

= 2 moles x 6.022 x 10^23

= 12.044 x 10^23 = 1.2044 x 10^24 atoms

Hence, 1.2044 x 10^24 sodium atoms are present in the given amount of sodium atoms.

1

Methane burns in oxygen to make carbon dioxide and water:


methane + oxygen → carbon dioxide + water


For most reactions to happen, the reactant molecules have to collide. But collisions

between them might not always cause a reaction.


Why might a collision between a methane molecule and an oxygen molecule not

always result in a reaction?

Answers

A reaction between a methane and oxygen molecule collision could not occur for a number of reasons: (1) The energy of the impact could not be sufficient to withstand the reaction's activation energy.

(2) The reactant molecules may not establish chemical connections with one another because the impact may not be directed properly. (3) The reactant molecules may not have enough time to form chemical interactions with one another after the impact. (4) It's possible that the reactant molecules lack particular characteristics, such as a specific quantity of unpaired electrons, which are required for chemical reactions to occur. (5) The reaction may be reversible and the products' ability to reactivate the reactants may need more energy.

the smallest component of a material that possesses both its chemical and physical characteristics. One or more atoms make up molecules.

learn more about molecules  here:

https://brainly.com/question/19556990

#SPJ4

how many moles in 85 grams of calcium

Answers

Mole present in 85 grams of calcium is 2.12 moles

It is given that

given mass of calcium = 85 grams

molar mass of calcium = 40 grams

We have to find the moles

The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12, its symbol is “mol”

moles = given mass/molar mass

moles = 85 gram/40 gram

moles = 2.12

Hence, moles in 85 grams of calcium is 2.12 moles

Learn more about Moles here:

https://brainly.com/question/15356425

#SPJ1

a 64.8 g 64.8 g sample of the compound x2o5 x 2 o 5 contains 48.0 g 48.0 g of oxygen atoms. what is the molar mass of element x?

Answers

A 64.8 g 64.8 g sample of the compound x2o5 x 2 o 5 contains 48.0 g 48.0 g of oxygen atoms. The molar mass of element x is 56 g/mol.

To determine the molar mass of element X, we can use the information provided about the mass of the compound and the mass of the oxygen atoms.

First, convert the mass of the compound to moles by dividing it by the molar mass of the compound:

(64.8 g) / (molar mass of X2O5) = moles of X2O5

Next, use the moles of X2O5 to determine the moles of oxygen atoms by multiplying by the number of oxygen atoms per molecule of X2O5:

moles of X2O5 x (5 moles of O / 1 mole of X2O5) = moles of O

Then, convert the mass of the oxygen atoms to moles by dividing it by the molar mass of oxygen:

(48.0 g) / (16.00 g/mol) = 3.00 moles of O

We know that the mass of the compound is equal to the mass of the element X and the mass of the oxygen atoms.

mass of X = mass of the compound - mass of the oxygen atoms

mass of X = 64.8 - 48.0 = 16.8 g

convert the mass of element X to moles by dividing it by the molar mass of X:

(16.8 g) / (molar mass of X) = moles of X

Now we can calculate the molar mass of element X by using the moles of X and the mass of X

molar mass of X = mass of X / moles of X

molar mass of X = 16.8 g / (3.00 moles of O x (1 mole of X2O5 / 2 moles of X)) = 56 g/mol.

The molar mass of element X is 56 g/mol.

To know more about compound please refer: https://brainly.com/question/13516179

#SPJ4

in this experiment, the pressure of the gas was 1.000 atm and the temperature was 294.6 k. what value do you get for the gas constant using the data you recorded for propane?

Answers

To calculate the gas constant using the data provided, you would use the ideal gas law equation: PV = nRT.

Assuming that the amount of propane (n) is given in moles and the volume (V) is given in liters, the ideal gas law equation can be rearranged to solve for R:

R = PV/nT

Given that the pressure (P) is 1.00 atm and the temperature (T) is 294.6 K, you can plug in these values and solve for R:

R = (1.00 atm) * (V) / (n) * (294.6 K)

Without knowing the exact values for V and n, it is not possible to determine the exact value for R. However, it is important to note that the units of R are L atm mol-1 K-1, and option A is the only choice that has the correct units, so the answer is A. 1.858 L atm mol-1 K-1.

To learn more about gas constant:

https://brainly.com/question/20348074

#SPJ4

sulfur, s8, combines with oxygen at elevated temperatures to form sulfur dioxide. if 240 oxygen molecules are used up in this reaction, how many sulfur molecules reacted?

Answers

The equation must have the following form to be balanced: 4CO2 + 2H2O = 2C2H2 + 5O2

S8: O2 = 1/8; S8 utilized = 240/8 = 30SO2 generated is equal to the number of sulphur molecules used, which is 240. Stoichiometry is the name given to the study of chemical processes in mathematics. Numerous calculations can be done, such as stoichiometry, which is most usually performed with moles but can also be done with masses and even percentages. Stoichiometric ratio A stoichiometric ratio is important when considering the interactions between specific elements or molecules. This exact ratio of reactant to product coefficients is necessary for a reaction to occur properly. Let's discuss some problems you can run across when you learn about stoichiometry. Chemical Equations in Balance Equations needing to be balanced is a fairly common stoichiometric issue type. This is an essential chemistry skill since a reaction can only occur if the ratio of reactants to products is correct.possess. Additionally, it provides an essential framework for organic chemistry. Balance the ensuing reply: _ CO2 + _ H2O C2H2 + _ O2 To be balanced, equations must have an equal number of each element on both sides of the reaction. Before balancing the oxygen, you can start by balancing the carbons and hydrogens. The equation must have the following form to be balanced: 4CO2 + 2H2O = 2C2H2 + 5O2

Learn more about Carbons here:

brainly.com/question/22530423

#SPJ4

which element is a gas at stp

Answers

Answer:

At standard temperature and pressure (STP), which is defined as 0 °C (273.15 K) and 100 kPa (1 atmosphere), several elements exist as gases.

The elements that are gases at standard temperature and pressure include:

Helium (He)

Neon (Ne)

Argon (Ar)

Krypton (Kr)

Xenon (Xe)

Radon (Rn)

Hydrogen (H2)

Answer:

At standard temperature and pressure (STP), which is defined as 0 °C (273.15 K) and 100 kPa (1 atmosphere), several elements exist as gases.

The elements that are gases at standard temperature and pressure include:

Helium (He)

Neon (Ne)

Argon (Ar)

Krypton (Kr)

Xenon (Xe)

Radon (Rn)

Hydrogen (H2)

the heat of vaporization of diethyl ether is . calculate the change in entropy when of diethyl ether condenses at .

Answers

The change in entropy Δs when 3.4 g of diethyl ether condenses at 34.6 °C is 4.1 J/K.

Enthаlpy (H) is defined аs the аmount of energy releаsed or аbsorbed during а chemicаl reаction. Entropy (S) defines the degree of rаndomness or disorder in а system.

The relаtionship between both pаrаmeters is given аs;

ΔS = ΔH ÷ T

ΔH = 26.7 KJ/mol for 1 mol of diethyl ether

number of moles = mаss ÷ molаr mаss

number of moles = 3.4 ÷ 72 = 0.04722

ΔH = 26700 × 0.04722 = 1260.77 J

T = 34.6 + 273 = 307.6 (upon converting to Kelvin temperаture)

ΔS = 1260.77 ÷ 307.6

ΔS = 4.1 J/K

Your question is incomplete, but most probably your full question can be seen in the Attachment.

For more information about entropy refer to the link:

https://brainly.com/question/13146879

#SPJ4

The graph below shows the phase change for H2O. Which statement best describes what is occurring at segment C? A. As energy increases, the temperature remains the same. B. As energy increases, temperature also increases. C. As temperature increases, energy remains the same. D. Energy and temperature remain the same.

Answers

The graph below shows the phase change for water. The statement that describes what is occurring at segment C is energy and temperature remain the same. The correct option is D.

What is phase change?

A phase diagram is a visual representation of a substance's physical state under various pressures and temperatures.

Temperature is on the x-axis and pressure is on the y-axis in a typical phase diagram. Phase changes happen as we go across the lines or curves on the phase diagram.

Therefore, the correct option is D. Energy and temperature remain the same.

To learn more about phase change, refer to the link:

https://brainly.com/question/30270780

#SPJ1

The question is incomplete. Your most probably complete question is given below: the graph is attached.

Use the periodic table to answer the questions below.

Which diagram shows the correct electron configuration for nitrogen (N)?

A group of five short lines. The first line has an up and a down arrow above it and is labeled 1 s below. The second line has an up and a down arrow and is labeled 2 s. The third arrow has an up and a down arrow; the fourth has an up arrow only, and the third has no arrows. The third, fourth, and fifth lines are bracketed with the label 2 p.

A group of five short lines. The first line has an up and a down arrow above it and is labeled 1 s below. The second line has an up and a down arrow and is labeled 2 s. The third, fourth, and fifth lines each have an up arrow and are bracketed with the label 2 p.

A group of five short lines. The first line has an up and a down arrow above it and is labeled 1 s below. The second line has an up and a down arrow and is labeled 2 s. The third and fourth lines each have an up arrow; the fifth line has a down arrow. The third, fourth, and fifth lines are bracketed with the label 2 p.

Answers

Atomic mass is the sum of the total number of protons and neutrons in an atom, while atomic number is the number of protons in the nucleus of an atom.

The difference between atomic mass and atomic numberThese two values are related, but they measure different properties.Atomic mass is the total mass of an atom, including the protons and neutrons, while the atomic number is the number of protons in the nucleus of an atom.This number is also used to identify elements, since each element has a unique atomic number.Therefore, the difference between atomic mass and atomic number is that atomic mass is the sum of the total number of protons and neutrons in an atom, while atomic number is the number of protons in the nucleus of an atom.The correct electron configuration for nitrogen (N) can be represented by a group of five short lines. The first line has an up and a down arrow above it and is labeled 1 s below.This indicates that the first electron is in the 1s orbital. The second line has an up and a down arrow and is labeled 2 s; this indicates that the second electron is in the 2s orbital.The third, fourth, and fifth lines each have an up arrow and are bracketed with the label 2 p; this indicates that the third, fourth, and fifth electrons are in the 2p orbital.This arrangement of electrons in the appropriate orbitals gives nitrogen its unique chemical properties, which makes it an essential component of all living organisms.

To learn more about The difference between atomic mass and atomic number refer to:

https://brainly.com/question/2093142

#SPJ1

Answer:

The answer is B

Explanation:

That's what the person above said.

based on the stoichiometry of the reaction, how many grams of benzophenone is an equimolar amount to the bromobenzene used in the experiment?

Answers

The bromobenzene used in the experiment was equimolar to 3.7 grams of benzophenone. The correct answer is C. 

The stoichiometry of a chemical reaction tells us the relative amounts of reactants and products involved in the reaction. In this case, the reaction is between bromobenzene and benzophenone to form a new compound.

The balanced equation for this reaction is:

C6H5Br + C6H5COC6H5 → C6H5COC6H5 + C6H5Br.

From the equation, we can see that one mole of bromobenzene reacts with one mole of benzophenone. Therefore, an equimolar amount of benzophenone is the same as the amount of bromobenzene used in the experiment. Since the molar mass of benzophenone is 182.23 g/mol, we can use this value to calculate the mass in grams by multiplying it with the number of moles.

To calculate the equimolar amount of benzophenone, we use the following formula:

mass of benzophenone = (mass of bromobenzene / molar mass of bromobenzene) x molar mass of benzophenone

Let's assume that the mass of bromobenzene used in the experiment is x. Hence:

mass of benzophenone = (x / 157.02 g/mol) x 182.23 g/molmass of benzophenone = x x 182.23/157.02 g/mol

Therefore, the equimolar amount of benzophenone is 3.7 grams.

This question should be provided with answer choices, which are:

A 2.2 B. 2.8 C. 3.7 D. 1.4

The correct answer is C.

Learn more about stoichiometry here: brainly.com/question/25829169

#SPJ4

Predicting Moles Worksheet Directions: Show your work for the following calculations. Circle your answers. NO work = NO credit!!! 1. How many moles of methane (CH4) are needed to produce 5.75 moles of water vapor? (Assume excess oxygen.) CH4(g) + 202(g) → CO₂(g) + 2H₂O(g) I will give all 100 of my points just to get this worksheet out the way honestly. I'm getting too stressed out by my people just bc I can't do this singular worksheet ​

Answers

The number of mole of methane, CH₄ needed to produce 5.75 moles of water vapour is 2.875 moles

How do I determine the mole of CH₄ needed?

We'll begin by obtaining the moles of CH₄ that reacted from the balanced equation:

CH₄ + 2O₂ -> CO₂ + 2H₂O

From the balanced equation above,

2 moles of H₂O were obtained from 1 mole of CH₄

Using the above information, we can determine the number of moles of CH₄ needed for the reaction. Details below:

From the balanced equation above,

2 moles of H₂O were obtained from 1 mole of CH₄

Therefore,

5.75 moles of H₂O will be obtained from = (5.75 × 1) / 2 = 2.875 moles of CH₄

Thus, we can conclude that the number of moles of CH₄ needed is 2.875 moles

Learn more about number of mole:

https://brainly.com/question/23350512

#SPJ1

Pls help:)! What are dipole-dipole interactions?

Answers

Answer:

Explanation:

Dipole-dipole interactions are a type of chemical bonding that occurs between two polar molecules. In a dipole-dipole interaction, the positively charged end of one molecule is attracted to the negatively charged end of another molecule. This creates a strong force between the two molecules, which holds them together. Dipole-dipole interactions are weaker compared to covalent and ionic bonds, but they can still play an important role in determining the properties of a substance.

Dipole–dipole interactions are weak interactions that arise from the close association of permanent or induced dipoles.

what is the de broglie wavelength of an oxygen molecule at room temperature? compare this to the average distance between oxygen molecules in a gas at 1

Answers

The de Broglie wavelength of a particle is given by the equation:

λ = h / p.

Where λ is the de Broglie wavelength, h is Planck's constant (6.62607015 x 10^-34 Js) and p is the momentum of the particle.. The de Broglie wavelength of an oxygen molecule at room temperature is on the order of 4.8 x 10^-10 m. This wavelength is much smaller than the average distance between oxygen molecules in a gas at 1 atm, which is about 2 x 10^-10 m. This means that the de Broglie wavelength of an oxygen molecule is much smaller than the distance between the oxygen molecules and it is not possible to see the interference or diffraction patterns of individual molecules in most cases.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ4

what is the atomic number for an element whose mass number is 115, which contains 65 neutrons per atom?

Answers

The element whose mass number is 115 and contains 65 neutrons per atom, its atomic number will be-

Atomic Number (Z) = Mass Number (A) - Number of Neutrons (N)

Z = 115 - 65

Z = 50

So, the atomic number for the given element is 50.

Which element has an atomic number of 50?

Tin is the element with the symbol Sn which has an atomic number of 50. Tin is classified as a post-transition metal. Tin is a silver-coloured metal and remains solid at room temperature.

What do you mean by atomic number?

The atomic number is the number of protons in an atom. Due to this, it is sometimes named the proton number. The atomic number is indicated by the letter Z. The symbol Z is derived from the German word Zahl, which means several numerals.

To know more about atoms, visit here:

https://brainly.com/question/13654549

#SPJ4

Chemical

energy.

chemica

Fuels contain a store of energy called

When fuels are burned the

energy. Some fuels, called

were formed from the remains of plants or

energy is changed into

fossil

fuels,

Coal was formed from dead

The plants were buried in

, which stopped them

away.

More mud buried and squashed them. The mud turned into

and the dead plants turned into

that lived in

Oil and gas were formed from plants and

to the sea bed and were

the sea. When they died they

buried. Over

of years they were squashed and heated,

and turned into

Answers

Coal, oil, and natural gas are examples of fuels that store chemical energy. The chemical energy in these fuels is transformed into heat energy when they are burnt. Some fuels, known as fossil fuels.

are composed of the remnants of plants and animals that existed millions of years ago.Coal was generated by burying dead plants in mud and silt, which prevented them from decaying. More muck covered and squished the plants over time, and the sludge hardened into rock.Coal, oil, and natural gas are examples of fuels that store chemical energy. The chemical energy in these fuels is transformed into heat energy when they are burnt. Some fuels, known as fossil fuels. The dead plants were converted into coal. Plants and animals that fell to the sea floor and were covered by silt produced oil and Coal, oil, and natural gas are examples of fuels that store chemical energy. The chemical energy in these fuels is transformed into heat energy when they are burnt.

learn more about fossil fuels  here:

https://brainly.com/question/3371055

#SPJ4

g calculate the amount of heat needed to boil 15.5 g of methanol (ch3oh). the molar heat of vaporization for methanol is 35.21 kj/mol. the molar mass of methanol is 32.04 g/mol.

Answers

The amount of heat needed to boil 15.5 g of methanol (ch3oh). the molar heat of vaporization for methanol is 35.21 kj/mol. the molar mass of methanol is 32.04 g/mol.

To calculate the amount of heat needed to boil 15.5 g of methanol, we need to use the formula: Q = mL

Where Q is the heat energy, m is the mass of the substance, and L is the molar heat of vaporization.

First we need to find the moles of methanol:

moles = mass / molar mass

moles = 15.5 g / 32.04 g/mol = 0.4828 moles

Then we can calculate the heat energy required to boil the methanol:

Q = mL

Q = 0.4828 moles * 35.21 kJ/mol

Q = 17.04 kJ

So, 17.04 kJ of heat energy is required to boil 15.5 g of methanol.

To learn more about molar here:

https://brainly.com/question/8732513

#SPJ4

comparing the structures of chaulmoogra oil with the ethyl esters formed by the ball method, why do you think the ethyl esters might be more readily absorbed by the body (and not form the painful bubbles like the oil)?

Answers

Chaulmoogra oil has long-chain fatty acids, but the ethyl esters generated using the ball process include shorter-chain fatty acids. Because shorter chain fatty acids may more easily.

enter cell membranes, they are more quickly absorbed by the body. Furthermore, the ethyl esters are more water-soluble than the oil, allowing for improved absorption. The big, insoluble molecules of long-chain fatty acids in chaulmoogra oil are most likely responsible for the production of painful bubbles. The ethyl esters' short chain fatty acids are less prone to create such bubbles and hence less unpleasant.comparing the structures of chaulmoogra oil with the ethyl esters formed by the ball method, why do you think the ethyl esters might be more readily absorbed by the body (and not form the painful bubbles like the oil) The big, insoluble molecules of long-chain fatty acids in chaulmoogra oil are most likely responsible for the production of painful bubbles. The ethyl esters' short chain fatty acids are less prone to create such bubbles and hence less unpleasant.comparing the structures.

learn more about acids  here:

https://brainly.com/question/29796621

#SPJ4

you have 0.5 l of air at 203 k in an expandable container at constant pressure. you heat the container to 273 k.what is the volume of air?

Answers

If 0.5 L of air at 203 k in an expandable container at constant pressure. The volume of air at 273 K would be 0.67 L.

The universal (or perfect) gas constant is 8.314 joules per kelvin per mole, according to the ideal gas law, which stipulates that PV is equal to nRT. n is the number of moles of the gas.

The Ideal Gas Law states that when a gas is at a given temperature, pressure, and volume, it has an equal number of molecules (but not the same mass)

V₁=0.5 L

T₁=203 K

V₂= 273 K

V₂ = unidentified

Now, V₁/T₁=V₂/T₂

So,

0.5L/203 = V₂/273

V₂= 0.67 L

Learn more about Gas Law

brainly.com/question/13207402

#SPJ4

find the concentration of barium hydroxide using titration data trial

Answers

We can calculate the molarity by dividing the quantity of barium hydroxide in moles by the volume of the initial solution.

How do you find the hydroxide concentration?Implement the titration formula.The formula is molarity (M) of the acid x volume (V) of the acid = molarity (M) of the base x volume (V) of the base when the titrant and analyte have a mole ratio of 1:1.The concentration of a solution, measured in moles of solute per liter of solution, is known as its molarity.After dissociation, the concentration of barium hydroxide will be half that of the hydroxide ions because barium hydroxide dissociates into its ions when dissolved in water as:A barium hydroxide solution with a pH of 12.22 therefore has a concentration of 8.29 10 3 M.

To learn more about hydroxide concentration refer

https://brainly.com/question/28464162

#SPJ1

Other Questions
Let f(x)-3x+5, h(x)-4x-2 and g(x)=x^2. Write an expression for each function.a. f+gb. f-g helium is collected over water at 258c and 1.00 atm total pressure. what total volume of gas must be col- lected to obtain 0.586 g of helium? (at 258c the vapor pressure of water is 23.8 torr.) sci material can be processed on siprnet if the content is secret//sc. true or false You can take the girl out of the country, but you cant take the country out of the girl.Which rhetorical device is used in this sentence?chiasmusasyndetonantithesiszeugma by knowing the law, a businessperson always will know what course of action is appropriate in any particular situation? goes beyond e-commerce and e-procurement by using information systems and the internet to perform all business-related tasks and functions, such as accounting, finance, marketing, manufacturing, and human resource activities. Read the passage.InformationMilk is an important part of many people's diet. Farmers who raise dairy cows are careful about who they hire to handle the milk. Their cows are tested regularly and once the milk is taken from the cows, it is filtered and cooled at the milk house. It is pumped into tanks and shipped to a milk plant where it is pumped into large holding tanks. At this location, tests ensure its quality and cleanliness. Pasteurization is the process to make milk safe. This process heats the milk to a temperature high enough to kill bacteria. At this time the milk is cooled quickly, stored, placed into smaller containers, shipped to various locations, and then placed on the shelf for purchase.QuestionWhich is the main idea of this passage?Answer options with 4 options1. There are many health benefits from drinking milk.2. Farmers are careful with their cows, testing them regularly for bacteria.3. There are many complex steps to getting milk safely from the cow to the store.4. Pasteurization is the process of heating and cooling that kills bacteria in milk. abrasive, hostile or confrontational language portrays a. a negative perspective. b. a positive perspective. c. unorganized content. d. a different point of view that is acceptable in some business situations. the pedigree diagram on p. 71 of your lab manual is for trait r in a family. use this pedigree diagram to answer the questions in this exercise. trait r is the mendelian trait in humans for tongue rolling. the allele for the ability to roll the tongue (r) is dominant over the allele for the inability to roll the tongue (r). what is the genotype of person a in the pedigree? true or false: when using curved arrow notation, the arrow will never begin on a positively charged atom.true false question.truefalse Do you know what 20% of 60 is? Someone baked 2 types of pie.He served 1/2 of the blueberry pie. And he also served 1/4 of the Apple pie, If each pie had 8 pieces to start, what fraction in eights of the Apple did he served? How did William Jennings Bryans Cross of Gold speech prove to be both a strength and a weakness of the Populists? Which sentence from the exerpts supports the idea that the brothers are more alike than they first appear which of these are elements of the business environment? multiple select question. financial environment technological environment corporate structure economic and legal environments competitive environment You work in a practice and have been asked to document some payer communications. what the determines where communications should be recorded. researchers using the interpretivist approach primarily seek to understand and describe communication experience. three solid plastic cylinders all have radius 2.45 cm and length 6.36 cm. find the charge of each cylinder given the following additional information about each one. Cylinder (a) carries charge with uniform density 15.3 nC/m2 everywhere on its surface. Cylinder (b) carries charge with uniform density 15.3 nC/m2 on its curved lateral surface only. Cylinder (c) carries charge with uniform density 490 nC/m3 throughout the plastic. ALWAYS use significant figure rules. Remember that these rules apply to all numbers that are measurements. If a vector that is 3 cm long represents 30 km/h, what velocity does a 5 cm long vector which is drawn using the same scale represent?50kmh60kmh100kmh three types of product-line pricing are price leaders, special-event pricing, and comparison discounting.