10. corn can be grown at a rate of 1,000 kcal per hectare, and it takes 20 times more land to produce beef than it does to produce corn. which of the following equations would correctly calculate the amount of land needed to produce 10,000 kcal of beef?

True, most chemicals can be cleaned up with a general spill kit, but a few chemicals require specialized spill procedures.

Weak chemicals can be cleaned up easily with general spill kits as they aren't corrosive enough to cause harm to living tissues and other non living materials such as marbles and construction units. Although, strong chemicals, like strong acids (such as hydrochloric acid, nitric acid) and strong bases are corrosive in nature, and need to be cleaned using specialised spill procedures for such chemicals. They can harm living tissues on contact and can degrade the quality of inanimate substances as well. Examples of some chemicals with what type of spill kit will be used for them:-

hydrofluoric acid = special

methanol = general

acetone = general

phosphoric acid = general

mercury = special

To know more about corrosion caused by chemicals, click here : https://brainly.com/question/20407861

#SPJ4

The statements that are true regarding acids and bases are: Aqueous ammonia does not produce toxic vapors but ammonium hydroxide does. Hydrogen fluoride is the safest of all the hydrogen.

halides. Nitric acid causes yellowing of the skin by denaturing proteins. When preparing aqueous solutions of acid, it is important to add the acid to the water to dissipate heat. strong acids and bases, and some weak, cause irreversible damage to living tissue It is not always true that all concentrated acids require a special hood to deal with the vapors, it depends on the acid in question and the concentration. The statements that are true regarding acids and bases are: Aqueous ammonia does not produce toxic vapors but ammonium hydroxide does. Hydrogen fluoride is the safest of all the hydrogen. Preparing solutions of bases can cause the water to boil but also depends on the base and the concentration.

learn more about  Hydrogen here:

https://brainly.com/question/28937951

#SPJ4

Lithium is the element because only lithium atom with 3 protons in this diagram.

An element is a pure substance that cannot be broken down into simpler substances through physical or chemical means.

Lithium is the symbol for the element. Because lithium has three protons, it has the atomic number 3. Because lithium atoms contain either 3 or 4 neutrons, it has an atomic mass of 6.94. On the periodic table, lithium is in group 1 and has one valence electron.

Thus, Lithium is the element because only lithium atom with 3 protons in this diagram.

To learn more about an element, follow the link;

https://brainly.com/question/13025901

SPJ1

The average rate of decomposition of NO₂ during this time interval, in mol/ L s is - 9 × 10⁻⁵ mol/ L.s.

The information given as :

The initial concentration = 0.113 mol / L

The concentration after 60 s = 0.1076 mol/L

The reaction is given as :

2NO₂  ---->  2NO  +  O₂

The average rate of decomposition :

r = - d [NO₂] / dt

r = - ( [NO₂] t2 - [NO₂] t1 ) / t2 - t1

r = - (0.113 mol/L - 0.1076 mol/L) / 60 s - 0 s

r = -  ( 5.4 × 10⁻³ mol/L ) / 60 s

r = - 9 × 10⁻⁵ mol/ L.s

To learn more about average rate here

https://brainly.com/question/13008302

#SPJ4

The molar volume of neon gas at STP is 22.44cm³.

Molar volume is the volume occupied by one mole of a substance (especially of a gas).

At standard temperature and pressure (STP), the molar volume is the volume occupied by one mole of a chemical element or a chemical compound. It can be calculated by dividing the molar mass (M) by mass density (ρ).

Molar density of neon gas is 0.9g/cm³

Molar volume = 20.2g/mol ÷ 0.9g/cm³

Molar volume = 22.44cm³

Learn more about molar volume at: https://brainly.com/question/29884686

#SPJ1

Answer: Potential Energy

Explanation:

Chemical energy is stored energy in between bonds. Any energy that is stored and therefore has to be released is potential energy.

The great nutritional value of crickets, particularly in terms of protein, makes them an excellent dietary source.

In particular, lean protein, minerals, and vitamins are all abundant in crickets, which are a great source of these nutrients. Compared to chicken, they have a greater protein content of about 65%. In addition to having a high protein content, crickets also have chitin and other fibers that have an impact on gut health.

The primary benefit of using crickets as a food source is their high nutritional value, particularly in terms of protein.

In other words, crickets metabolize their food more effectively and need less food to produce the same amount of protein as cattle. This is known as a greater feed conversion rate. Less area will need to be set aside for the production of protein sources as a result.

To learn more about nutritious refer to:

https://brainly.com/question/1553515

#SPJ1

Granite is formed from cooled molten rock, while gneiss is formed solid rock bedt compares the way that these rocks are formed.

What is molten rocks?

Molten rocks, also known as magma, is hot, liquid rock that is found beneath the Earth's surface. It is formed when heat and pressure cause rocks to melt, releasing gas and other materials. Molten rocks can contain crystals, gas bubbles, and other materials.    When molten rock reaches the Earth's surface, it is called lava. Molten rocks can be made of many different minerals, including basalt, andesite, and rhyolite.

Therefore, Granite is formed from cooled molten rock, while gneiss is formed solid rock bedt compares the way that these rocks are formed.

To learn more about molten rocks

Here: https://brainly.com/question/1996722

#SPJ1

The color change of the copper (II) carbonate hydroxide hydrate will be CuCO_3-light green powder.

Copper(II) carbonate or cupric carbonate is a chemical compound having chemical formula CuCO₃. At ambient temperatures, it is an ionic solid (a salt) which is consisting of copper(II) cations Cu²⁺ as well as carbonate anions CO₂⁻³. This compound is rarely encountered because it is very difficult to prepare[2] and readily reacts with water moisture from the air.

Copper carbonate will be green colored, when heated it gives out a black solid copper oxide. C u C O ₃ → C u O + C O ₂ [ g ] Zinc carbonate will be white colored, when heated it will gives a yellow solid - zinc oxide.

To know more about copper (II) carbonate here

https://brainly.com/question/1543891

#SPJ4

a) The velocity x(t) = 8sint

The position x'(t) = 8cost

The acceleration x"(t) = -8sint

b) position, x(t) =  4√3 cm.

   velocity, x'(t) = 4 cm/s

   acceleration, x"(t) = -4cm/s²

a) The velocity, position and acceleration at the time t is as follows :

The velocity x(t) = 8sint

The position x'(t) = 8cost

The acceleration x"(t) = -8sint

b) The position, velocity and the acceleration of the mass at the time t = 2π / 3.

The position, x(t)=8sin(2π /3)

                            = 4√3 cm.

The velocity, x'(t) = 8cos(2π /3)

                             =  4 cm/s

The acceleration, x"(t) = 8sin(2π/3)

                                      = -4cm/s²

To learn more about velocity here

https://brainly.com/question/10981603

#SPJ4

Non metals react with oxygen to form non-metallic oxides. For example, SO2 , NO2 , etc. These are usually acidic in nature. This is the reason for acid rain.

Examples:

C ( s ) + O 2 ( g ) → CO 2 ( g )

H 2 ( g ) + O 2 ( g ) → 2 H 2 O ( l )

S + O2→ SO2

Answer:

A non-metal oxide is produced when a non-metal burns in oxygen.

Explanation:

The word equation for the overall reaction is as follows:

Oxygen with non-metal result in non-metal oxide.

Non-metal + oxygen → Non-metal oxide

D)  only by changing the composition of a substance, a chemical property can be identified.  

An characteristic of a specific material that can be observed during a chemical reaction is called a chemical property. Main chemical properties include chemical stability, flammability, toxicity, heat of combustion, pH value, and rates of radioactive decay.

The arrangement, ratio, and kind of atoms in chemical substance molecules are referred to as chemical composition. The molar mass of a mixture can be utilized to identify some of its chemical components. You can always just write down the chemical formulae and then multiply the atomic weight of each element by the amount of atoms that comprise each molecule. You can then verify the molar mass you get as a result with the sample's actual mass.

Learn more about chemical property here:

/brainly.com/question/13562531

#SPJ4

A chemical property can be identified _____ changing the composition of a substance.

A)with and without.

B)without.

C)with or without.

D)only by

Osmosis can be thought of as a special type of diffusion in which only the solvent (water or another liquid) travels over a semipermeable membrane. Both diffusion and osmosis are examples of processes of passive transport that work to maintain the consistency of the concentration of a solution.

Osmotic pressure is the name given to the hydrostatic pressure that maintains equilibrium and blocks the osmotic influx of water into a solution that is highly concentrated. As a consequence of the presence of dissolved solutes, a solution has the ability to draw additional water into itself via a membrane that is only partially permeable. This property is referred to as osmotic potential.

To learn more about osmotic pressure and osmotic potential, click here:

https://brainly.com/question/29819107

#SPJ4

After glycolysis produces pyruvate, the following procedures must take place in order to release all three carbon atoms from pyruvate in the form of carbon dioxide.

A crucial stage in the metabolism of carbohydrates and lipids is the three-carbon molecule pyruvate. It is the result of the glycolysis process, which breaks down glucose to produce ATP, which is a kind of energy.

Pyruvate decarboxylation, which happens first, is the process by which pyruvate is transformed into acetyl-CoA. A sequence of processes take place in the citric acid cycle, commonly referred to as the Krebs cycle or the TCA cycle, where the acetyl-CoA is further degraded.

Enzymes work to convert acetyl-CoA to CO2 during the citric acid cycle, releasing high-energy electrons that are then used to create ATP.

The final step is oxidative phosphorylation, which takes place in the mitochondria's inner membrane. Here, electrons are transferred to the electron transport chain so that the ATP synthase enzyme can pump protons and produce ATP.

The CO2 that is released into the atmosphere is the end result.

To know more about pyruvates, visit:

brainly.com/question/13024735

#SPJ4

The amount of electricity is required to deposit one mole of aluminium from a solution of [tex]$\mathrm{AlCl}_3$[/tex] exists Three Faradays.

The unit of measurement used by chemists known as a mole is very significant. In the same way that having a dozen eggs implies you have twelve eggs, having a mole of anything indicates you have 602,214,076,000,000,000,000,000 of that thing. When measuring very small objects like atoms, molecules, or other particles, chemists must use moles.

In the International System of Units, a substance's amount is measured in moles, which are denoted by the sign mol. The quantity of a substance is a measurement of the number of elementary entities of a specific substance present in an object or sample.

The quantity of atoms is measured in terms of moles. Mole conversion can be done for units like grams and milligrams.

[tex]$$A l^{3+}+3 e^{-} \rightarrow A l$$[/tex]

The amount of electricity required = 3 Faraday.

Therefore, the correct answer is option C. Three Faradays,

The complete questions:

What amount of electricity is required to deposit one mole of aluminium from a solution of [tex]$\mathrm{AlCl}_3$[/tex] ?

A. One Faraday

B. One ampere

C. Three Faradays

D. Three amperes

To learn more about mole refer to:

https://brainly.com/question/24191825

#SPJ1

The true statement concerning the motifs and domains of proteins is Separate proteins with similar domains are likely to have a similar function. The correct answe is C.

 The biological activity of a protein can occasionally be anticipated by looking for existing proteins with comparable amino acid sequences since proteins with similar structures typically have similar activities.

Finding motifs and domains is a crucial part of biological sequence characterisation. Because freshly acquired protein sequences frequently lack significant similarity with database sequences of known functions over their entire length, making functional assignment challenging, it is crucial to identify unknown protein activities.

In this instance, the identification of brief consensus sequences linked to known functions can help researchers understand how the protein acts. The name "motifs" refers to these consensus sequence patterns.

Your question is incomplete but most probably your full question was

Which of the following is true concerning the motifs and domains of proteins?

Many domains make up a motif.

Every polypeptide chain is limited to one domain.

Separate proteins with similar domains are likely to have a similar function.

All domains of a protein have the same function.

None of the above are true

Learn more about motifs and domain at https://brainly.com/question/2005375

#SPJ4

The pH of pure neutral water will increase when temperature decreases.

The formation of hydrogen or hydronium ions and hydroxide ions from neutral water proceeds via an endothermic reaction. The equilibrium reaction is written as:

H₂O ⇄ H⁺ + OH⁻

In the forward reaction heat is absorbed.

According to Le Chatelier's principle, "if we increase the temperature of the water, the equilibrium will move to lower the temperature again. It will do that by absorbing the extra heat."

This means if a change is made to the conditions of a reaction in dynamic equilibrium, the position of equilibrium will move to counter the change that we have made.

To know more about Le Chatelier's principle here

https://brainly.com/question/8249075

#SPJ4

To synthesize the given compound from an alkyl bromide and a nucleophile in an SN2 reaction, you need to draw the reactants using the wedge/hash bond tools to indicate stereochemistry.

If there is more than one possible combination of alkyl bromide and nucleophile , draw only one combination. Do not include counter-ions, e. g. Na+, I-, in your answer. For example, one possible combination could be:

R-Br + Nu: → R-Nu + Br-

An alkyl bromide is a type of organic compound that contains a carbon atom bonded to a bromine atom. Alkyl bromides are classified as alkyl halides, which are compounds that contain a carbon atom bonded to a halogen atom. Alkyl bromides are commonly used in a variety of organic reactions, such as in substitution reactions, in which the carbon-bromine bond is replaced by a different group. Alkyl bromides can also be used to make alkyl sulfonates, alkyl esters, and other compounds. Alkyl bromides are generally colorless liquids or solids, and have a low boiling point.

Learn more about alkyl bromide:

https://brainly.com/question/25329208

#SPJ4

Answer:

Explanation:

1

 atom of

Cu

has a mass of

1.055

×

10

−

22

g

.

Explanation:

1 atom Cu

⋅

1 mol Cu

6.022

×

10

23

atoms Cu

⋅

63.546 g Cu

1 mol Cu

=

1.055

×

10

−

22

g Cu

1 atom of copper must be converted in moles to express it as a quantity that can be converted into grams (our second step).

Avogadro's Number

(

1 mole

=

6.022

×

10

23

particles

)

and the relative atomic mass of copper

(

1 mole of copper = 63.546 g

)

are the equalities required to make

7.4 torr for PI2. Due to its direct proportionality to the initial pressure of HIHI, PI2 7.4 torrs.

The forward and reverse reactions happen simultaneously when the system is in equilibrium. Each reactant and product are present in equal amounts once equilibrium has been attained. The relationship between the concentrations of the reactants and the products is mathematically represented by the equilibrium constant equation.

The equilibrium state is the state of a system whose attributes are constant under constant external conditions. Even after equilibrium has been reached, reactants and products continue to change, making chemical equilibria dynamic in nature. However, the reaction time for moving forward and backward is the same. Balance examples include Placed on the table was a book. a vehicle that travels at a fixed speed. a chemical process where the rates of the forward and reverse reactions are equivalent.

Learn more about equilibrium here:

brainly.com/question/517289

#SPJ4

Answer:

because of the downward force called gravity

Answer:

a) 1,69 M

b)11.55%

Explanation:

a) To determine the [CH3CH2OH] in the wine, we can use the stoichiometry of the balanced equation provided. Since the ratio of CrO7^2- to CH3CH2OH is 2:3, for every 2 moles of CrO7^2- that are consumed, 3 moles of CH3CH2OH are produced. Therefore, we can use the volume and molarity of the CrO7^2- solution to determine the number of moles of CH3CH2OH present in the wine sample.

The number of moles of CrO7^2- used in the titration is (26.25 mL)(0.500 M) = 13.125 moles. Therefore, the number of moles of CH3CH2OH present in the wine sample is (3/2)(13.125 moles) = 19.69 moles

Since the original volume of wine sample was 10.0 mL, the [CH3CH2OH] in the wine is (19.69 moles) / (0.01 L) = 1.969 M

b) To convert the answer in part (a) into percent by volume, we can use the density of ethanol and the conversion factor of 100mL/1L.

The density of ethanol is 0.789 g/mL, so the mass of ethanol in the sample is (19.69 moles) x (46.07 g/mol) = 910.1 g

The mass of ethanol in 100ml is (910.1g) x (100mL/1L) = 91.01 g/100mL

The volume of ethanol in the sample is (91.01 g/100mL) / (0.789 g/mL) =115.5 mL/L or 11.55% by volume.

The given statement, "When a system reaches equilibrium, the transition of individual molecules from reactants to products or products to reactants stops, and all molecules remain in the respective states they were in when equilibrium was reached" is true (T) because at chemical equilibrium, all molecules to remain in their respective states.

In a chemical reaction at equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. As a result, the concentration of the reactants and products remains constant over time, meaning that the transition of individual molecules from reactants to products or vice versa stops. The state of all the molecules remains unchanged from when the system reached equilibrium, making it a state of balance between the forward and reverse reactions. The position of equilibrium can shift if the conditions of the reaction change (such as temperature, pressure or concentration), but the system will always strive to reach a new balance once again.

Learn more about equilibrium here: brainly.com/question/5081082

#SPJ4

The enthalpy of neutralization is  -53.6 kJ/mol

The  change in enthalpy per mole of water formed​ is 53.6 kJ/mol.

We have to note that the enthalpy is the heat that have been evolved or absorbed in a reaction. We can see that in this case, the reaction involved the combination of sodium hydroxide and nitric acid.

Number of moles of the reactants = 50/1000 L * 0.5 mol/dm³

= 0.025 moles

Total mass of the reactants = 50 g + 50 g = 100 g (Since the density of the solution is 1.0g/cm³)

The heat evolved = mcdT

m = mass of the solution

dT = temperature change

c = Heat capacity of the solution

H = 100 * 4.18 * ( 23.2 - 20)

H = 1.34 kJ

The heat evolved = - ( 1.34 kJ/0.025 moles)

= -53.6 kJ/mol

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1

As per the given reaction, 2 moles or 46 g of LiOH is needed to completely react with CO₂. Then, 25.5 g of CO₂ requires 1.16 moles of LiOH.

Lithium hydroxide is an ionic compound formed by the combination of metallic lithium and water moiety. LiOH easily reacts with carbon dioxide forms an insoluble compound lithium carbonate and water.

As per the given balanced equation of the reaction between LiOH and carbon dioxide, one mole of CO₂ reacts with 2 moles of LiOH.

molar mass of CO₂ = 44 g/mol

molar mass of LiOH = 23 g/mol

mass of 2 LiOH = 46 g.

Then, mass of LiOH needed to react with 25 .5 g of CO₂ = (25.5 × 46) /44 = 26.13 g

Number of moles in 26.13 g of LiOH = 26.13/23 = 1.16 moles.

Therefore, the number of moles of LiOH are needed to react completely with 25.5 g of CO2 is 1.16 moles.

Find more on LiOH:

https://brainly.com/question/16251002

#SPJ1

Producing energy and manfacturing of the following activities most Mass directly affect the water supply

An object's mass is determined by how much matter it has. Anything that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass. How much energy an object contains is not determined by its size.

The resistance of the body to acceleration (change in velocity) when ever a net force is employed can be measured experimentally as mass, which is equivalent to inertia. The gravitational pull of an object to other bodies is also dependent on its mass.

To know more about mass visit:

https://brainly.com/question/15959704

#SPJ1

Answer:

Explanation:

To be used by plants, the N2 must be transformed through a process called nitrogen fixation. Fixation converts nitrogen in the atmosphere into forms that plants can absorb through their root systems.

When a current flows through a wire over an extended period of time, heating effect takes place, meaning the temperature of the wire rises, which causes the wire's resistance to rise.

To learn more about current refer

https://brainly.com/question/2969220

#SPJ1

The oxygen content of something like a metal oxide matching the composition MO is 19.66%. The element M is represented by the Zn symbol.

The elements with boiling and melting temperatures and glossy crystalline solids are known as metals. Metals are efficient heat and electrical conductors. Metals like iron, aluminium, nickel, silver, and tin, for instance, are utilized frequently in our daily lives.

Native Metals were originally discovered and used by ancient man around 5000 BC. In the following two thousand years, up until the beginning of the Bronze Age, humankind perfected the techniques for discovering, working with, and using these local metals. Gold nuggets were frequently the simplest to locate and utilize.

To know more about metal visit:

https://brainly.com/question/29404080

#SPJ4

When an atom gains or loses electrons from its outermost energy shell, ions form. When an electron or electrons are lost to achieve a full duplet or octet, elements form cations. An anion is formed when an element gains an electron or more than one electron.

The octet rule refers to atoms' preference for having eight electrons in their valence shell. Atoms with fewer than eight electrons are more likely to react and form more stable compounds.

Atoms can satisfy the octet rule in one of two ways. One method is for them to share their valence electrons with other atoms. The second method is to move valence electrons from one atom to another.

Thus, When an atom gains or loses electrons from its outermost energy shell, ions form.

To learn more about the octet rule, follow the link;

https://brainly.com/question/865531

#SPJ1