10. Which graph shows the solution to the inequality <-6?

Justin's speed on his way to his parents' house was 42 mph. Therefore, his speed on his way back home was 18 mph slower, or 18 mph.

Let's use x mph to represent the pace at which Justin was travelling to his parents' house. Then, as he travelled 24 mph slower owing to the terrible weather, his speed on the way back would be (x - 24) mph.

By dividing the distance he drove by his speed, one may determine how long it took Justin to drive to his parents' house, or:

Time is a function of both speed and distance.

Similar to how long it would take Justin to drive back home:

Time is a function of distance and speed (x - 24)

Justin drove for a total of 12 hours, so we can construct the following equation:

420/x + 420/(x-24) = 12

By multiplying both sides of the equation by x(x-24), we may simplify the equation and find the value of x. After some algebraic fiddling, we arrive at:

[tex]x^2 - 24x - 840 = 0[/tex]

We can find the value of x by using the quadratic formula:

[tex]x = (24 +- \sqrt{(242 + 41840)}) / 2[/tex] or x = -18

We can determine that Justin was travelling at a speed of 42 mph as he made his way to his parents' home because the speed cannot be negative. Thus, he travelled at a speed of 18 mph less on the way back home.

We can confirm the following to see if the solution is accurate:

420/42 + 420/18 = 10 + 23.33 = 33.33

Justin did, in fact, drive for a total of 12 hours, proving that our answer is accurate.

Learn more about speed here:

https://brainly.com/question/30461913

#SPJ4

90 mm Hg is Zigg's mean arterial pressure.

Here's the formula for calculating MAP: MAP = (CO x SVR) + CVPR

where:

CO stands for cardiac output (measured in liters per minute).

SVR stands for systemic vascular resistance (measured in mm Hg/L/min).

CVPR stands for central venous pressure (measured in mm Hg).

Now, let's get started with the calculation of MAP.

First, let's calculate CO (cardiac output): CO = HR x SV

where:

HR is heart rate (measured in beats per minute).

SV is stroke volume (measured in milliliters per beat).

CO = 140 bpm x 95 mlCO = 13300 ml/minCO = 13.3 L/min

Next, we need to calculate SVR (systemic vascular resistance).

The formula for calculating SVR is: SVR = (MAP - CVP) / CO

where:

MAP is mean arterial pressure (measured in mm Hg).

CVP is central venous pressure (measured in mm Hg).

CO is cardiac output (measured in liters per minute).

Since we don't have CVP in this question, let's assume it to be zero.

SVR = (MAP - 0) / 13.3 L/minSVR = MAP / 13.3 L/min

Now, we can rearrange the above equation to calculate

MAP:

MAP = SVR x 13.3 L/minMAP = 60 mm Hg (diastolic pressure) + 1/3 (systolic pressure - diastolic pressure)MAP = 60 mm Hg + 1/3 (150 mm Hg - 60 mm Hg)MAP = 60 mm Hg + 30 mm HgMAP = 90 mm Hg

Therefore, Ziggy's mean arterial pressure (MAP) is 90 mm Hg.

To know more about arterial pressure, refer here:

https://brainly.com/question/30351725#

#SPJ11

the percentage of racers who did not complete the marathon is 8.3% when rounded to the nearest tenth of a percent.

To find the percentage of racers who did not complete the marathon, we need to divide the number of racers who did not complete by the total number of racers and then multiply by 100 to get a percentage.

Number of racers who did not complete = 12 + 7 = 19

Total number of racers = 230

Percentage of racers who did not complete = (19/230) x 100% = 8.3%

Therefore, the percentage of racers who did not complete the marathon is 8.3% when rounded to the nearest tenth of a percent.

Learn more about percentage here

https://brainly.com/question/16797504

#SPJ4

The sum of the volume of the square prism and the square pyramid is 672 cubic inches.

What is prism ?

A prism is a three-dimensional geometric shape that has two identical, parallel polygonal bases and rectangular sides that connect the bases. The sides are perpendicular to the bases and their shape depends on the shape of the base. For example, if the base is a square, the prism is called a square prism. If the base is a rectangle, the prism is called a rectangular prism. The height of the prism is the perpendicular distance between the bases.

According to the question:
First, let's calculate the volume of the square prism:

The formula for the volume of a square prism is V = lwh, where l is the length, w is the width, and h is the height.

In this case, the length (l) and width (w) of the prism are both equal to a, which is 10 inches, and the height (h) is 6 inches. So, we have:

V_prism = lwh = 10 x 10 x 6 = 600 cubic inches

Next, let's calculate the volume of the square pyramid:

The formula for the volume of a square pyramid is V = (1/3)Bh, where B is the area of the base and h is the height.

In this case, the base of the pyramid is a square with side length b, which is 6 inches, so the area of the base is:

[tex]B = b^2 = 6^2 = 36 square inches[/tex]

The height of the pyramid is also 6 inches, so we have:

V_pyramid = (1/3)Bh = (1/3) x 36 x 6 = 72 cubic inches

Finally, the total volume is the sum of the volumes of the prism and pyramid:

V_total = V_prism + V_pyramid = 600 + 72 = 672 cubic inches

Therefore, the sum of the volume of the square prism and the square pyramid is 672 cubic inches.

To know more about prism visit:
https://brainly.com/question/13379929
#SPJ1

Psychologists have raised concerns about the accuracy and validity of ____ personality tests, as they are not standardized. This means that the same test administered to two different people can yield different results, making it difficult to interpret. Moreover, results may be inconsistent, meaning the same test administered at different times could produce different results. This lack of consistency can lead to inaccurate interpretations and can render the tests less useful. Furthermore, there is a lack of standardization of criteria and methodologies used to evaluate personality tests, which could lead to misinterpretations of results.
In order to address these issues, it is important to use standardized personality tests, which are tested and validated to ensure consistent and accurate results. This will ensure that the tests yield consistent results and can be interpreted accurately.

Additionally, researchers must adhere to established guidelines and criteria to ensure that the results are reliable and valid. This will enable professionals to confidently use the tests and make accurate interpretations of the results.

for such more questions on standardization

https://brainly.com/question/14095938

#SPJ11

Answer:

Slope is -2. So, choice D is the best option.

Step-by-step explanation:

Start with one point then use the formula to get to the next point:

Rise
------

Run

Let's start at (0,5) then count down 2 points, which is the "Rise"(seems like an interesting name to pick but it works).
Next, you go to the right once. Which counts as the "Run".

Remember: The slope is like a ratio, and the "y" will always go as the numerator and the "x" as the denominator. Which is why "Rise" is on top and the "Run" is on the bottom.

So your answer would be 2/1. And that simplifies to 2. But since you went down and not up, it would be negative 2.

Hope this helps and if you have any other questions or need clarification please ask!

(a) To test the hypotheses H0: µ = 115 and H1: µ > 115, we will conduct a one-sample t-test using the given information.

Step 1: Calculate the t-value.
t = (sample mean - population mean) / (standard deviation / √sample size)
t = (127.8 - 115) / (30 / √25)
t = 12.8 / 6
t = 2.13

Step 2: Determine the degrees of freedom (df).
df = sample size - 1
df = 25 - 1
df = 24

Step 3: Find the P-value.
Using a t-table or calculator, find the P-value corresponding to t = 2.13 and df = 24. The P-value is approximately 0.022.

Step 4: State the conclusion.
Since the P-value is less than the commonly used significance level of 0.05, we reject the null hypothesis (H0: µ = 115) and conclude that the mean score for older students is significantly higher than the mean score for the entire population.

(b) The two important assumptions for the t-test are:
1. The sample is randomly selected from the population.
2. The population is normally distributed.

The most important assumption for the validity of the conclusion in part (a) is the normality of the population. If the population is not normally distributed, the results of the t-test may not be valid, and the conclusion may be inaccurate.

To learn more about hypotheses: https://brainly.com/question/25263462

#SPJ11

After the triangle is dilated by a scale factor of 1/4, the coordinates of point C' are (10, -14).

We can use the following formula to find the coordinates of point C' after the triangle has been dilated by a scale factor of 1/4:

C' = (1/4)(C - center) + center

where C denotes the original coordinate of point C and centre denotes the dilation center (which is not specified in the problem).

However, because this is the most common choice and is not explicitly stated, we can assume that the center of dilation is the midpoint of line segment AB. Line segment AB's midpoint is:

((8+8)/2, (-24-8)/2) = (8, -16)

So, in the formula, we can substitute this value for Centre:

C' = (1/4)(C - (8, -16)) + (8, -16)

All that remains is to plug in the coordinates of point C and simplify:

C' = (1/4)((16, -8) - (8, -16)) + (8, -16)

= (1/4)(8, 8) + (8, -16)

= (2, 2) + (8, -16)

= (10, -14)

As a result, the coordinates of point C' after the triangle has been dilated by a factor of 1/4 are (10, -14).

To know more about coordinates visit:-

https://brainly.com/question/16634867

#SPJ9

There are 52 weeks of data included in this frequency distribution.

The given frequency distribution displays the weekly sales of a certain brand of television at an electronics store.

We need to find the number of weeks of data included in this frequency distribution.From the given data, we can see that the frequency column represents the number of televisions sold per week.

To find the number of weeks of data included, we need to sum up the frequency column. Summing up the frequency column gives us:12 + 5 + 5 + 5 + 25 = 52

Therefore, there are 52 weeks of data included in this frequency distribution.

The given frequency distribution displays the weekly sales of a certain brand of television at an electronics store. We need to find the number of weeks of data included in this frequency distribution.

From the given data, we can see that the frequency column represents the number of televisions sold per week. To find the number of weeks of data included, we need to sum up the frequency column. Summing up the frequency column gives us:

12 + 5 + 5 + 5 + 25 = 52

To know more about frequency distribution click on below link:

https://brainly.com/question/14926605#

#SPJ11

Answer:96

Step-by-step explanation:

[tex]Area=\frac{d1 d2}{2}[/tex]

[tex]Area=\frac{(6+6)(8+8)}{2}[/tex]

[tex]Area=96[/tex]

The probability that a class of 36 has an average midterm mark that is more than 77.83 is 0.0766. This is because the mean of the normally distributed marks is 78 and the standard deviation is 6. Using the standard normal distribution formula, we can calculate the probability that the average mark of 36 students is more than 77.83.

Standard Normal Distribution Formula: P(x > a) = 1 - P(x < a)

P(x > 77.83) = 1 - P(x < 77.83)

P(x > 77.83) = 1 - 0.9234

P(x > 77.83) = 0.0766

The value of x for the given inequality to justify the equation to get the desired result of the equation is x < - 4 .

Define inequality:

In mathematics, inequality refers to a statement that compares two values or expressions, indicating that one value or expression is greater than or less than the other. An inequality can be represented using symbols such as "<" (less than), ">" (greater than), "<=" (less than or equal to), ">=" (greater than or equal to), or "≠" (not equal to). For example, "2x + 3 > 5" is an inequality that states that the expression "2x + 3" is greater than "5". Inequalities are often used in algebra, calculus, and other branches of mathematics to represent relationships between variables or to solve equations.

What about equation in the relation?

In mathematics, an equation is a statement that asserts the equality of two expressions. An equation consists of two expressions, separated by an equals sign "=" and it states that the value of one expression is equal to the value of the other expression. The expressions in an equation can contain variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. Equations are used in many areas of mathematics to describe relationships between variables, to solve problems, and to make predictions. For example, the equation "x + 3 = 7" states that the value of the expression "x + 3" is equal to "7".

According to the given information:

For the following equation we have that,

⇒ - 8x < 32

⇒ -x < [tex]\frac{32}{8}[/tex]

⇒ -x < [tex]4[/tex]

⇒ x < [tex]- 4[/tex]

To know more about inequality visit:

https://brainly.com/question/30228778

#SPJ1

Answer:

1. 1/2

2. -4/1

3. 1/1

Step-by-step explanation:

Answer:

1 y=2/1+2

2 y=.25x+3

3 y=x-2

Step-by-step explanation:

Step-by-step

y=mx+b

1. 2

2. .25

3. 1

Answer:

The television tower is 132 feet high.

Step-by-step explanation:

Let h be the height of the television tower. Set up and solve this proportion.

[tex] \frac{3}{5} = \frac{h}{220} [/tex]

[tex]5h = 660[/tex]

[tex]h = 132[/tex]

The total number of eggs is 1542.

To find the total number of eggs, we can use the fact that the 540 eggs sold represent 35% of the total eggs. We can start by setting up a proportion:

35/100 = 540/x

where x is the total number of eggs. To solve for x, we can cross-multiply and simplify:

35x = 54000

x = 54000/35

x = 1542.86

Therefore, the total number of eggs is approximately 1542.86. Since we can't have a fraction of an egg, we can assume that the total number of eggs is 1542.

To find the number of eggs that are not sold, we can subtract the number of eggs sold from the total number of eggs:

1542 - 540 = 1002

Find out more about The total number of eggs is 1542.

To find the total number of eggs, we can use the fact that the 540 eggs sold represent 35% of the total eggs. We can start by setting up a proportion:

35/100 = 540/x

where x is the total number of eggs. To solve for x, we can cross-multiply and simplify:

35x = 54000

x = 54000/35

x = 1542.86

Therefore, the total number of eggs is approximately 1542.86. Since we can't have a fraction of an egg, we can assume that the total number of eggs is 1542.

Find out more about Proportion

brainly.com/question/29986294

#SPJ4

Answer:

759=165% of last quarters members so you could divide by 1.65(move the decimal place twice to the left) so you get 460 people were there last quarter

Step-by-step explanation:

Based on the attached figure, the volume of the composite figure is 408 cm³

A composite figure is a three-dimensional shape that is made up of two or more simpler shapes.

To find the volume of a composite figure, you need to break it down into its simpler shapes and then use the appropriate formulas to calculate the volume of each individual shape

The volume of the composite figure is:

Volume = area of base * height

Substituting:

Base area = (14 * 3) + (1/2)(5 + (14-6))(7 - 3) = 68 cm²; height = 6 cm

So, we have

Volume = area of base * height = 68 cm² * 6 cm = 408 cm³

This means that

The volume is 408 cm³

Hence, the volume is 408 cm³

Read more on volume at:

https://brainly.com/question/463363

#SPJ1

when the distance between the top of the rod and the foot of the wall is 152 inches, the distance between the bottom of the rod and the foot of the wall is decreasing at a rate of approximately 19.08 inches per second.

In this case, we are given that the distance between the top of the rod and the foot of the wall is decreasing at a rate of 9 inches per second. We want to find the rate at which the distance between the bottom of the rod and the foot of the wall is changing.

We can start by using the Pythagorean theorem to relate the three distances involved: the height of the rod (h), the distance between the top of the rod and the foot of the wall (x), and the distance between the bottom of the rod and the foot of the wall (y). Specifically, we have:

[tex]h^2 = x^2 + y^2[/tex]

To find the rate at which y is changing, we can take the derivative of both sides of this equation with respect to time (t), using the chain rule:

2h dh/dt = 2x dx/dt + 2y dy/dt

We are given that dh/dt = -9 inches per second (since h is decreasing). We also know that h = 172 inches and x = 152 inches (when y = 0). Substituting these values and solving for dy/dt, we get:

dy/dt = (h/x) * (dx/dt - (x/y) * dh/dt)

dy/dt = (172/152) * (-9 - (152/y) * 9)

dy/dt = -19.08 inches per second (rounded to two decimal places)

Find out more about Pythagorean theorem

brainly.com/question/15175162

#SPJ4

Answer:

16/36 = 12/27

Answer: 2+2

Step-by-step explanation: easy thanks :)

The dimensions of the pool are either (21.55, 16.45) or (28.45, 7.55).

The perimeter of the bottom of a rectangular swimming pool is 60 meters, and the area is 221 square meters.

To find the dimensions of the pool, we can use the formula P = 2(l + w) where P is the perimeter and l and w are the length and width of the pool respectively. We can rearrange this formula to solve for either l or w, so we'll solve for l.

2(l + w) = 60
2l + 2w = 60
2l = 60 - 2w
l = (60 - 2w)/2

Now, we can use the formula A = l*w to solve for w.

221 = l*w
221 = (60 - 2w)/2 * w
221 = (60w - 2w^2)/2
442 = 60w - 2w^2
2w^2 - 60w + 442 = 0

Using the quadratic formula, we get w = 16.45 or 7.55.

Now that we know the width, we can use the formula l = (60 - 2w)/2 to find the length. For w = 16.45, l = 21.55, and for w = 7.55, l = 28.45.

Therefore, the dimensions of the pool are either (21.55, 16.45) or (28.45, 7.55).

To learn more about dimensions refer :

https://brainly.com/question/15225905

#SPJ11

EXPLANTION:

1. For a browsing time of 17 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X, where X is the browsing time in minutes.

Step-by-step:
Y = 2 + 0.98(17)
Y = 2 + 16.66
Y = 18.66 dollars

The observed value (40.3 dollars) is above the regression line, as it is higher than the predicted amount spent (18.66 dollars).

2. For a browsing time of 14 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X.

Step-by-step:
Y = 2 + 0.98(14)
Y = 2 + 13.72
Y = 15.72 dollars

The observed value (10.84 dollars) is below the regression line, as it is lower than the predicted amount spent (15.72 dollars).

3. For a browsing time of 28 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X.

Step-by-step:
Y = 2 + 0.98(28)
Y = 2 + 27.44
Y = 29.44 dollars

The observed value (27.2 dollars) is below the regression line, as it is lower than the predicted amount spent (29.44 dollars).

To know more about Regression :

https://brainly.com/question/14313391

#SPJ11

The true statements for the graph of y=(x+2)²2+4 are:, The vertex of the parabola is at the point (-2, 4)., The graph opens upwards, since the coefficient of the squared term is positive., The y-intercept of the graph is at the point (0, 9)., The x-coordinate of the vertex is -2, which is also the axis of symmetry of the parabola., The graph is a parabola, which is a U-shaped curve.

What is graph?

In mathematics, a graph is a visual representation of a set of points, called vertices or nodes, that are connected by lines or curves, called edges. Graphs are used to model relationships between objects or to represent data in a visual way.

In the context of coordinate geometry, a graph is a visual representation of a function or relation, which shows the relationship between the input values (x-axis) and output values (y-axis). The graph is typically a set of points plotted on a Cartesian plane, where each point represents a unique input-output pair.

To know more about Graph related questions, visit:

https://brainly.com/question/17267403

#SPJ1

Complete Question:

Select the statements that are true for the graph of y = (x+2)²2 + 4.

a) The vertex of the parabola is (-2, 4).

b) The parabola opens upward.

c) The y-intercept of the parabola is 4.

d) The x-intercepts of the parabola are (-4, 0) and (0, 0).

e) The axis of symmetry of the parabola is a vertical line through x = -2.

The difference between cardinality and join type is that cardinality describes the relationship between two data tables, while join type is the specific method used to combine the two tables.

Cardinality defines the maximum number of records that can exist in one table for a relationship with another table. Cardinality can be either one-to-one, one-to-many, or many-to-many.

A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. For example, a customer can have multiple orders. In this situation, a one-to-one join type is often used because it is the most efficient way to retrieve the related data. This is because one-to-one join type only requires that one record be searched, while a one-to-many join type would require that multiple records be searched in order to find the related records. Additionally, a one-to-one join type ensures that no duplicate records will be returned in the result.

In summary, cardinality describes the relationship between two tables while join type is the specific method used to combine the two tables. A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. To efficiently retrieve the related data, a one-to-one join type is often used. This is because it only requires that one record be searched and it ensures that no duplicate records will be returned in the result.

To know more about cardinality refer here:

https://brainly.com/question/29093097

#SPJ11

5.4 out of the 12 adult Australian sheep dogs in the sample weigh 65 pounds or more, on average.

We can start by calculating the likelihood that a single adult Australian sheep dog weighs 65 pounds or more using the provided estimate of 45%. If p represents the percentage of adult dogs weighing 65 pounds or more, the following is the result:

p = 0.45

Next, we may calculate the median number of dogs weighing 65 pounds or more using the sample size of 12. If X represents the proportion of dogs in the sample that weigh 65 pounds or more, X will follow a binomial distribution with n = 12 and p = 0.45 as its parameters.

The formula for X's mean or expected value is:

E(X) = np

When we change the values of n and p, we obtain:

E(X) = 12(0.45) = 5.4

Learn more about sample here:

https://brainly.com/question/15659544

#SPJ4

Answer:

1.6 minutes

Step-by-step explanation:

6.4 meters/4 speed

A shape's perimeter is calculated by adding the lengths of all of its sides and edges. The V's direction is [tex](-5, -12)[/tex]  .

The complete length of a shape's boundary is referred to as the perimeter in geometry. Its dimensions are expressed in linear units like centimetres, metres, inches, and feet.

We need to know the lengths of all the sides of Fard ZH in order to calculate its perimeter. We can see from the diagram that  [tex]ZF = ZD + DF = 24 + 28 = 52[/tex]  and [tex]FH = ZG = 30 and ZH = 36.[/tex]

As a result, Fard ZH's perimeter is as follows:

perimeter = [tex]= ZF + FH + ZH + ZG[/tex]

perimeter  [tex]= 52 + 30 + 36 + 30[/tex]

perimeter  [tex]= 148[/tex]

So the perimeter of Fard ZH is [tex]148[/tex]  .

(3) The vector that connects points A and B must be identified in order to determine the direction of V, and it can be written as follows:

[tex]V = (xB - xA, yB - yA)[/tex]

Where xA and yA represent point A's x and y coordinates, and xB and yB represent point B's x and y coordinates.

Plugging in the given values, we get:

[tex]V = (5 - 10, 2 - 14)[/tex]

[tex]V = (-5, -12)[/tex]

Therefore, The V's direction is [tex](-5, -12)[/tex] .

Learn more about dimension here:

https://brainly.com/question/28688567

#SPJ1

The quadratic equation with the easiest method that could be used to find the solutions:

5x² + 24x + 21 = 0 :: Factoring

x² + 4x + 27 = 0 :: Completing the Square

x² + 8x + 15 = 0 :: Factoring

-3x² = -5x + 8 :: Dividing by x and simplifying gives Quadratic Formula

An equation is a mathematical statement that uses an equal sign to show that two expressions are equal. It contains variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. The goal of an equation is to solve for the variable(s) that make the equation true.

Here,

The easiest method to find the solutions of a quadratic equation depends on the form of the equation and the tools available. Here are some common methods and when they are typically used:

Zero Product Property/Factoring: This method is used when the quadratic equation can be factored into two linear factors, each of which equals zero.

Square Root Property: This method is used when the quadratic equation is in the form of x² = a, where a is a positive number. For example, the equation x² = 9 can be solved using the Square Root Property: take the square root of both sides and remember to include both the positive and negative roots, giving x = ±3.

Completing the Square: This method is used when the quadratic equation is in the form of x² + bx + c = 0, where b and c are constants. Completing the square involves adding and subtracting a constant term to both sides of the equation to create a perfect square trinomial, which can then be factored and solved using the Square Root Property.

Quadratic Formula: This method is used when the quadratic equation is in the form of ax² + bx + c = 0, where a, b, and c are constants and a ≠ 0. The Quadratic Formula is x = (-b ± √(b² - 4ac)) / 2a.

To know more about equation,

https://brainly.com/question/28243079

#SPJ1

New car prices to fall within is $18,300 - $41,900

Interval of prices would we expect at least 95% of new car prices to fall within Suppose that the average price for new cars has a mean of $30,100, a standard deviation of $5,600 and is normally distributed. Based on this information, the interval of prices that we would expect at least 95% of new car prices to fall within is $18,300 - $41,900.How to solve the problem? We know that the average price of new cars is $30,100 and the standard deviation is $5,600. The normal distribution has 95% of the data points within two standard deviations of the mean. Therefore, the interval of prices that we would expect at least 95% of new car prices to fall within is given by:Lower limit: $30,100 - 2 × $5,600 = $18,300Upper limit: $30,100 + 2 × $5,600 = $41,900Thus, the interval of prices that we would expect at least 95% of new car prices to fall within is $18,300 - $41,900.

Learn more about Standard deviation

brainly.com/question/23907081

#SPJ11

The point c satisfying the conclusion of the Mean Value Theorem for the function f(x) = x^-8 on the interval [1, 5] is: c = 1.4697

The conclusion of the Mean Value Theorem says that there is a number

c in the interval (1, 5) such that:

f'(c) = (f(5) - f(1))/(5 - 1)

We are given the function f(x) = x⁻⁸

Thus:

f(1) = 1⁻⁸ = 1

f(5) = 5⁻⁸ = 0.00000256

Thus:

f'(c) = (0.00000256 - 1)/4

= -0.25

f'(c) = -8x⁻⁹

Thus:

-8c⁻⁹ = -0.25

c⁻⁹  = 0.25/8

c⁻⁹ = 0.03125

c = 0.03125^(-1/9)

c = 1.4697

Read more about Mean Value Theorem at: https://brainly.com/question/19052862

#SPJ1