3. If a gas has a pressure of 32.1 psi at a temperature of 25°C, then what is the new pressure if the temperature is increased to 75°C?

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the described chemical reaction, we first write the corresponding equation to obtain:

[tex]Cu+2AgNO_3\rightarrow 2Ag+Cu(NO_3)_2[/tex]

Thus, we proceed as follows:

Part 1 of 3: here, since the molar mass of silver and copper (II) nitrate are 107.87 and 187.55 g/mol respectively, and the mole ratio of the former to the latter is 2:1, we can set up the following stoichiometric expression:

[tex]m_{Cu(NO_3)_2}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu(NO_3)_2}{2molAg}*\frac{187.55gCu(NO_3)_2}{1molCu(NO_3)_2} \\\\m_{Cu(NO_3)_2}=1.12gCu(NO_3)_2[/tex]

Part 2 of 3: here, the molar mass of copper is 63.55 g/mol and the mole ratio of silver to copper is 2:1, the mass of the former that was used to start the reaction was:

[tex]m_{Cu}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu}{2molAg}*\frac{63.55gCu)_2}{1molCu} \\\\m_{Cu}=0.380gCu[/tex]

Part 3 of 3: here, the molar mass of silver nitrate is 169.87 g/mol and their mole ratio 2:2, thus, the mass of initial silver nitrate is:

[tex]m_{AgNO_3}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg}*\frac{169.87gAgNO_3}{1molAgNO_3} \\\\m_{AgNO_3}=2.03gAgNO_3[/tex]

Best regards!

Answer:

Explanation:

I can’t explain but this is the answer LOL

Answer:

Iron is limiting reactant

Explanation:

Based on the reaction:

Fe + S → FeS

1 mole of iron reacts per mole of Sulfur

To solve this question we must convert the mass of each reactant to moles using molar masses of each reactant. As the reaction is 1:1, the reactant with the lower amount of moles is limiting reactant.

Moles Fe -Molar mass: 55.845g/mol-

4.68g * (1mol / 55.845g) = 0.0838 moles

Moles S -Molar mass: 32.065g/mol-

2.88g * (1mol / 32.065g) = 0.0898 moles

As the amount of moles of Fe < Moles S,

Iron is limiting reactant

When 4.68 g of iron reacts with 2.88 g of sulfur to produce FeS, iron is the limiting reagent.

If in a chemical reaction two reactants are present and one of them is present in less quantity as compared to other, is known as limiting reagent.

Given chemical reaction is:
Fe + S → FeS

From the stoichiometry of the reaction it is clear that equal moles of both reactant is required for the formation of product, so their mole ratio is 1:1.

Now we calculate the moles by using the formula:

n = W/M, where

W = given mass

M = molar mass

Moles of 4.68g of iron = 4.68g / 55.845g/mole = 0.0838 moles

Moles of 2.88 of sulfur = 2.88g / 32.065g/mole = 0.0898 moles

Moles of iron is less as compare to the sulfur, so it is the limiting reagent.

Hence, iron is the limiting reagent.

To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359

Answer:

The electric force between them decreases

Explanation:

The force between two charged particle is given by :

[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]

Where

r is the distance between charges

If the distance between the charges is increased, the electric force gets decreased as there is an inverse relation between force and distance.

Hence, the correct option is (c) "The electric force between them decreases"

Answer:

c

Explanation:

yxyyyxyxxyxxy yy y gg ff ff d d f t r rr rr rr rr r r t tt t

Answer:

M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.

Explanation:

M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.

Answer:

1.95 M

Explanation:

Molarity is a measure of the molar concentration of a substance (solution). In relation to the volume, it is calculated using the formula as follows;

C1V1 = C2V2

Where;

C1 = initial concentration (M)

C2 = final concentration (M)

V1 = initial volume (L)

V2 = final volume (L)

According to the provided information in this question;

C1 = 14.38 M

C2 = ?

V1 = 1.28 L

V2 = 9.45 L

Using C1V1 = C2V2

14.38 × 1.28 = C2 × 9.45

18.4064 = 9.45 C2

C2 = 18.4064 ÷ 9.45

C2= 1.95 M

Answer:

0.375 mols

Explanation:

mol:mass

1 : 44

x :16.5

cross multiply and get the answer

endothermic

Explanation:

I believe it's an endothermic but I'm not all too sure

Answer:

Pottasium nitrate is highly exothermic!However the dissolution of sodium nitrate in water is endothermic. Heat is absorbed during process.

Answer:

Pistil

Explanation:

I believe it is the pistil, because the pistil is part of the female reproductive system of a flower. A stamen is for the male reproductive system.

Answer:

Low-pressure system and clear weather.

Explanation:

Answer:

oxygen ion O2-

Explanation:

because it has 8 protons and gave gained 2 electron so O2-.

Answer:

The grams of sodium chloride that will be made is 292.5 g. calculation. 2Na + Cl₂ → 2NaCl. step 1: calculate the moles of Na. moles = mass/molar mass. From periodic table the molar mass of Na = 23 g/mol. moles = 115 g/23 g / mol = 5 moles. Step 2 : use the mole ratio to determine the moles of NaCl. Na:NaCl is 2:2 = 1:1 therefore the moles of NaCl is also = 5 moles.

Explanation:

We know sodium is a very active metal and chlorine is also a very reactive non-metal. Usually, metals like to eliminate electrons and non-metals such as halogens like to accept electrons. Sodium readily eliminate its last shell electrons become Na+ cation and chlorine accepts that electron to form Cl-anion.

Answer:

53676 J

Explanation:

m = 355 g

c = 2.4 J/gºC

ΔT = 63°C

q = mcΔT

  = (355)(2.4)(63)

  = 53676 J

The amount of heat is 53676J to raise the temperature of 355 g of ethanol.

Temperature is a measurement of the amount of energy of the atoms in a system or a physical quantity that expresses hot and cold.

Heat is energy that is transmitted through one body to some other due to a temperature differential. When two bodies of different temperatures come together, energy can be transferred (heat flows) from the hotter to the colder.

It can be determined by the formula:

q =mCΔT.

where, q is heat, m is mass , C is and T is temperature.

Calculation of heat is shown below:

It is given that, mass of ethanol = 355 g, c = [tex]2.4 J/g^{0}[/tex] C, ΔT. = [tex]63^{0} C[/tex]

Now, put the values of given data in heat formula:

q =mCΔT

= 355×2.4×63

=53676J.

Therefore, the amount of heat will be 53676J to raise the temperature of 355 g of ethanol

To know more about heat and temperature click here.

https://brainly.com/question/1429452.

#SPJ2

When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.

In chemistry, we define the temperature of a substance as the average kinetic energy of all the atoms or molecules of that substance. Not all of the particles of a substance have the same kinetic energy. At any given time, the kinetic energy of the particles can be represented by a distribution.

In physics, temperature is defined as the average kinetic energy of the particles in an object. ... When particles move more quickly, temperature is higher and an object feels warmer. When particles move more slowly, temperature is lower and an object feels cooler.

乁(ᵔヮᵔ)ㄏ

Answer:

a chemical reaction occured

Explanation:

bubbling and fizzing after adding a substance, most offten means a chemical reaction is happening

Answer: Heat energy contained by water is 130.625 J.

Explanation:

Given: Mass = 1.25 g

Specific heat = [tex]4.18 J/g^{o}C[/tex]

Initial temperature = [tex]20.0^{o}C[/tex]

Final temperature = [tex]45.0^{o}C[/tex]

Formula used to calculate heat energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = m \times C \times (T_{2} - T_{1})\\= 1.25 g \times 4.18 J/g^{o}C \times (45.0 - 20.0)^{o}C\\= 130.625 J[/tex]

Thus, we can conclude that heat energy contained by water is 130.625 J.

Answer:

The answer is C density.

Answer:

I believe its F: 2.55

Explanation:

I know I'm very late, positive you're past this question, I'd hope at least.

Answer:

Explanation:

its supposed to be not supported not inclusive because you said mix

Answer:

1.)C₃H₈O

2)OH

3.)1-propanol

1.) C4H8O

2.) C2H6O or CH3CH2OH

3.)Ethanol

Explanation:

Hope this help

Answer:

The answer to your question is B

Answer:

The titration process has quite a few real-world uses, including key roles in the food industry and medical community. The titration process is essentially an analytical technique, as it is used to determine a chemical or physical property of a chemical substance, element, or mixture (such as food). Specifically in the food industry, it is used to allow food manufactuers to determine the quantity of a reactant in a sample. To provide an example, it can be used to find the specific amount of stuff that is usually labeled on the nutrition label, such as sugar, salt, protein, calcium, vitamin C, etc. As for the medical world, pharamcists typically use this process to get the proper mix when compounding medicines. It is used to get the necessary proportions in intravenous drips.

Answer:

2m.

Explanation:

molality = no.of moles of solute ÷ mass of solvent in kg

molalty = 1.5 moles ÷ 0.75 g

            = 2m

Answer:

The cation is written first in the name; the anion is written second in the name. Rule 2. When the formula unit contains two or more of the same polyatomic ion, that ion is written in parentheses with the subscript written outside the parentheses.

When writing the formula of a compound that contains polyatomic ion, the metal is written first followed by the central atom in the ion and then other atoms that surround the central atom.

A poly atomic ion refers to an ion that comprises of more than one atom. Such ions are common in chemistry. Examples of polyatomic ions include; PO4^3-, BH4^- etc.

When writing the formula of a compound that contains a polyatomic ion, the metal is written first then the central atom in the ion follows before other atoms that surround the central atom in the ion.

Learn more: https://brainly.com/question/6284546

Answer:

Yes

Explanation:

The genetic testing is also called as the DNA testing. It is mainly used for identifying the changes in the DNA sequence or the chromosomes structure. It can also measure the results in the genetic changes.

Couples those who are planning to start a family should go for a genetic testing so as to minimize a risk in the upbringing or growth of their offspring. By doing a genetic testing a couple can well know the conditions of the baby that could affect them. The result from a genetic testing can help to plan better before starting a family. Therefore, it is advisable for couples to go for a genetic testing so that they plan better by knowing the conditions.

Answer:

4.00M NaOH

Explanation:

A 50-ml amount of 40.0M NaOH contains

(40.0 mol NaOH/1 L)×(0.0500L) = 2.00 mol NaOH

Adding enough water to make a 500.0 mL NaOH solution, the new concentration of this solution is

2.00 mol NaOH/0.5000 L = 4.00M NaOH

Reaction takes place is

2KClO3 --> 2KCl + 3O2

from above equation 2 moles of potassium chlorate is forming 3 moles of Oxygen gas.

now given 6.83 moles of oxygen and moles of potassium chlorate is missing,

consider x moles of potassium chlorate are needed to form 6.83 moles of oxygen

from above condition, .

3 》》》》2

x 》》》》6.83

3/x = 2/6.83

x = 3×6.83/2

x= 10.245

Answer- 10.245 moles of potassium chlorate are needed to produce 6.83 moles of oxygen gas.

Answer:

15.5 moles

Explanation:

Applying,

PV = nRT.................. Equation 1

Where P = pressure, V = Volume, n = number of mole, R = molar gas constant, T = Temperature.

Make n the subject of the equation

n = PV/RT............... Equation 2

From the question,

Given: P = 0.899 atm, V = 425 L, T = 24 °C = (273+24) K = 297 K.

Constant: R = 0.083 L.atm/K.mol

Substitute these values into equation 2

n = (0.899×425)/(297×0.083)

n = 15.5 moles