The voltage as a function of time for the power source oscillating at the given frequency is determined as V = 169.7sin(120πt).
Peak voltageThe peak voltage of the source is calculated as follows;
Vrms = 0.7071V₀
120 = 0.7071V₀
V₀ = 120/0.7071
V₀ = 169.7 V
Angular frequency of the waveω = 2πf
where;
f is frequency = 60 Hz
ω = 2π x 60
ω = 120π rad/s
Voltage equation as function of timeV = V₀sin(ωt)
V = 169.7sin(120πt)
Learn more about peak voltage here: https://brainly.com/question/6249123
The voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.
What is induced voltage?Electromagnetic induction causes the induced voltage. Electromagnetic induction is the process of creating emf (induced voltage) by exposing a conductor to a magnetic field.
We have:
[tex]\rm V{rms} = 120[/tex]
We know:
[tex]\rm V_{rms} = 0.7071V_o[/tex]
[tex]\rm 120 = 0.7071V_o[/tex]
[tex]\rm V_o = 169.70[/tex] Volts
Expression for the angular frequency is given by:
ω = 2πf
Where f is frequency
ω = 2π x 60
ω = 120π rad/s
Voltage equation as a function of time is given by:
V = V₀sin(ωt)
V = 169.7sin(120πt)
Thus, the voltage equation is a function of a time is V = 169.7sin(120πt) if the 1. 5-kω resistor and 27. 7-mh inductors are connected in series to a vrms = 120 v ac power source oscillating at a frequency of f = 60 Hz.
Learn more about the induced voltage here:
brainly.com/question/19482771
#SPJ4
What is Al's hypothesis?
options:
If I freeze fresh water and salt water then the salt water will freeze more quickly because salt increases the freezing point temperature.
If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature
If I freeze fresh water and salt water then both will freeze at the same time because salt doesn't affect the freezing time.
If I freeze cool aid and water then the water will freeze more quickly because cool aid increases the freezing point temperature.
Answer:
This is your answer
If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature
Explanation:
I hope it helped you
its about dirve its about power
Answer:
We stay hugely we devour
Explanation:
It's the rock
A block initially at rest on a horizontal, frictionless surface is accelerated by a constant horizontal force of 5. 0 newtons. If 15 joules of work is done on the block by this force while accelerating it, the kinetic energy of the block increases by.
By the work-energy theorem, the block's kinetic energy is increased by 15 J. The only force performing work on the block is the constant 5.0-N push.
Melissa's hair stands up on end after she takes her wool hat off in the winter but not in the summer
Answer:
Static electricity
Explanation:
A static reaction is transpiring with the surrounding air as well as her hair.
i need help with this question on circuits!!
Answer:
B
A
A
B
Explanation:
In the wiring of houses, a parallel circuit is used, otherwise, if the circuit of one of the parts is interrupted, the current will not enter the other circuits.
A rocket is launched straight up with a velocity of 7.59. What would be the velocity when it lands?
Answer:
the same as the initial launch velocity (7.59 m/s)
Explanation:
vf^2 = vi^2 + 2ad
d = displacement = 0, so vf^2 = vi^2, so vf = vi = 7.59m/s
Non-Contact Forces Unit Test
Why is glass a good insulator? (1 point)
O The atoms in glass hold on tightly to their positively charged particles.
O The atoms in glass do not hold on tightly to their positivelycharged particles.
The atoms in glass do not hold on
Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.
What is an insulator?Insulators are those substances that do not conduct heat or electricity like their conductor counterparts.
Conduction of electric charges is as a result of the free flow of electrons in the atom of the substance.
Hence, a good insulator holds on tightly to its electrons and prevent them from flowing freely to conduct electric charges.
Therefore, Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.
Learn more about insulators at: https://brainly.com/question/24909989
It's the first answer, The atoms in glass hold on tightly to their positively charged particles.
- CONNECTIONS
---
much love <3
Rectangular plate has a voltage of +180V and plate to the first plate) has a 'voltage of -5V. Determie another rectangular plate (parallel to between these two plates? The distance of the field strength at any point separation of the plates is finite, say 8.6mm.
For a Rectangular plate has a voltage of +180V and a 'voltage of -5V. , the second plate has the Electric field mathematically given as
E=21.5*10^3v/m
What is the field strength?Generally, the equation for the Electric field is mathematically given as
E=v/d
Where
v={180-(-5)}v
v=185v
Therefore
E=185/8.6*10^{-3}
E=21.5*10^3v/m
In conclusion, Electric field
E=21.5*10^3v/m
Read more about electric field
https://brainly.com/question/9383604
Seismic waves do not travel along the Earth’s surface. Please select the best answer from the choices provided T F.
Seismic waves do not travel along the Earth’s surface. The statement is false.
what are seismic waves?
The seismic waves can be defined as the waves full of energy that travel through the Earth's layer, these waves are the result of earthquake.
They can further be divided into two types body wave and surface waves. The body waves travel in the interior of the Earth and the surface waves travel at the surface of the Earth.
The seismic waves can have an amplitude of few centimeters in large earthquake. They travel slower as compared to the body waves.
Hence Seismic waves do not travel along the Earth’s surface. The statement is false.
To know more about Seismic waves follow
https://brainly.com/question/6835759
Answer:
False
Explanation:
Ed 2022
2. Describe the new digital governance and sourcing approach since accelerate implementation. Include both project management and portfolio management decision-making and accountability
The prompt seeks to explain how Philips uses digital governance in its sourcing approach or procurement.
How did Philips use a New Digital Governance and Sourcing approach?
Phillips was able to achieve this by hosting the "Supplier Development Group".
Then, various departments within Phillips met with the supplier's Group to find out how more raw materials could be gotten in the most environmentally friendly way possible.
Learn more about Digital Governance at:
https://brainly.com/question/381572
The new digital governance and sourcing approach is described as strategy to accelerate implementation.
What is New Digital Governance?Digital tools along with social media have empowered people to have access to infinite information and make connections globally. All the citizens or individuals are using digital based technologies to get hold of benefits caused by using them.
Sourcing approach is used in supply chain management that gathers the information and used in an organization for purchasing power. This finds the best possible values in the marketplace. This strategy helps to attain business goals.
Learn more about Digital Governance.
https://brainly.com/question/381572
#SPJ4
Help its due in 2 hours
Physics Word Problem
An archer shoots an arrow at a 75 m distant target; the bull’s-eye of the target is at same height as the release height of the arrow. If d = 75 m and v = 37 m/s. At what angle must the arrow be released to hit the bull’s-eye if its initial speed is 37m/s?
Answer:
15.6 degrees
Explanation:
3
A car travels at an average speed of 60 km/h for 15 minutes.
How far does the car travel in 15 minutes?
D
900 km
C 240 km
4.0 km
A
В B 15 km
Answer:
(Option B)The car travels 15km in 15 minutes.
Explanation:
Notice that the speed is written using units of km/h and the time is written using units of minutes.
Convert the time interval to hours. Remember that 1 hour equals 60 minutes:
15 min = 15 min × [tex]\frac{1h}{60~min}=0.25h[/tex]
The distance d that a particle travels during a time t if it moves at an average speed v is given by the formula:
d = v · t
Replace v=60km/h and t=0.25h to find the distance traveled by car:
[tex]d=(60\frac{km}{h}) ~x~(0.25h)=15km[/tex]
Therefore, the car travels 15km in 15 minutes.
Hope this helps!
If you have any queries please ask.
What is the thoery of Newton?
Answer:
apple fall on his head, then he discovers gravity. Law of motion
Explanation:
Answer:
gravity is the theory of Newton.
Explanation:
The reason for this is because one day he was sitting under the apple tree and an apple fell on top of his head. So he wanted to figure out what had caused the apple to fall on his head.
what is electric charge?
Answer:
Electric Charge is the property associated with matter due to which it produces and experiences electric and magnetic effect
In a pendulum, a continuous change occurs between kinetic and
potential
electromagnetic
thermal
mechanical
[tex] \sf \qquad \qquad \huge \underbrace{єхplαnαtiσn}[/tex]
The correct choice is ❝ A ❞
❖ whєn wє tαlk αвσut α pєndulum, ít gσєѕ thrσugh ❝ tσ αnd frσ ❞ mσtíσn, αlѕσ knσwn αѕ hαrmσníc mσtíσn. αѕ вєíng ín thє cαѕє σf α pєndulum, thєrє'ѕ α cσntínuσuѕ chαngє ín kínєtíc αnd pσtєntíαl єnєrgч.
❖ whєn thє вσв íѕ αt mєαn pσѕítíσn, ít hαѕ ítѕ mαхímum vєlσcítч, αnd thє nєt fσrcє αnd αccєlєrαtíσn αctíng σn ít íѕ zєrσ, thєrєfσrє ít hαѕ mαхímum kínєtíc єnєrgч αt thαt pαrtículαr ínѕtαnt.
❖ whєrє αѕ, íf thє вσв íѕ αt σnє σf thє єхtrєmє pσѕítíσnѕ, ítѕ vєlσcítч вєcσmєѕ zєrσ, αnd thє αccєlєrαtíσn αnd fσrcє αctíng σn ít íѕ mαхímum, ѕímcє ít hαѕ nσ vєlσcítч, thєrєfσrє ít hαѕ nσ kínєtíc єnєrgч αt thαt ínѕtαnt, thє σnlч єnєrgч ít hαѕ αt thαt tímє íѕ pσtєntíαl єnєrgч.
❖ ѕíncє thє mσvєmєnt íѕ cσntínuσuѕ, cσntínuσuѕ chαngє ín єnєrgч σccurѕ, вut thє ѕum σf вσth thє єnєgíєѕ rєmαínѕ cσnѕtαnt αt єvєrч ínѕtαnt.
[tex]\qquad \qquad\huge \dag\normalsize\sf \boxed{\underline{ǤríʍɌεαƿєr}} \: \huge \dag[/tex]
Control rods are used to slow down the reaction in the reactor core when the core becomes too hot. Please select the best answer from the choices provided T F.
The best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.
What is a nuclear reactor?A nuclear reactor, often known as an atomic pile, is a device that initiates and controls nuclear chain reactions or nuclear fusion processes.
Nuclear reactors are used in nuclear power plants to generate energy as well as in nuclear marine propulsion.
Control rods are employed in nuclear reactors because the processes that occur in a nuclear reactor are very exothermic.
As a result, when these control rods are infused into a nuclear reactor, they absorb neutrons and aid in the management of the chain reaction. As a result, the rate of the chain reaction is brought under control.
As a result, we may infer that the statement control rods are employed to slow down the reaction in the reactor core when it gets too hot is correct.
Hence the best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.
To learn more about the nuclear reactor refer to the link;
https://brainly.com/question/896706
Identify the solutions (homogeneous mixtures) in the list below. check all that apply. lead, an alloy of tin and lead ammonia, a pure compound of nitrogen and hydrogen window cleaner, a mixture of ammonia and coloring dissolved in water gasoline, a mixture of organic liquids with a fixed composition throughout distilled water, pure with no metals or particles
Answer:
Brainliest pls
Explanation:
lead solder, an alloy of tin and lead
window cleaner, a mixture of ammonia and coloring dissolved in water
gasoline, a mixture of organic liquids with a fixed composition throughout
The solutions and homogeneous mixtures in the given list are:
A. Lead solder, an alloy of tin and lead.
D. Window cleaner, a mixture of ammonia and coloring dissolved in water.
E. Gasoline, a mixture of organic liquids with a fixed composition throughout.
What is a solution?A solution can be defined as a special type of homogeneous mixture that comprises a solute and a solvent.
A homogeneous mixture can be defined as any solid, liquid, or gaseous mixture which has an identical (uniform) composition and properties throughout any given sample of the mixture.
In Science (Physics), all solutions are considered to be a homogeneous mixture because their constituents are uniformly (evenly) distributed.
In conclusion, the solutions and homogeneous mixtures in the given list are:
Lead solder, an alloy of tin and lead.Window cleaner, a mixture of ammonia and coloring dissolved in water.Gasoline, a mixture of organic liquids with a fixed composition throughout.To know more about solution follow
brainly.com/question/22070951
Which rights did women become more active in pursuing after achieving the right to vote? Select four options.
equal pay
equal treatment
access to credit
military enlistment
access to higher education
Answer:
A, B, C, E
Explanation:
Who wants to be shipped out, am I right?
Answer:
It would be equal pay, equal treatment, access to credit
AND access to higher education.
Explanation:
Hope this helps you!!!!
Particle q1 has a charge of 2.7 μc and a velocity of 773 m/s. if it experiences a magnetic force of 5.75 × 10–3 n, what is the strength of the magnetic field? t in the same magnetic field, particle q2 has a charge of 42.0 μc and a velocity of 1.21 × 103 m/s. what is the magnitude of the magnetic force exerted on particle 2? n
1)The strength of the magnetic field for particle 1 will be 2.8 T.
2)The magnitude of the magnetic force exerted on the particle will be 0.12 N.
What is a magnetic field?It is the type of field where the magnetic force is obtained. With the help of a magnetic field. The magnetic force is obtained it is the field felt around a moving electric charge.
The given data in the problem is;
q₁ has a charge = 2.7 μc
v₁ is the velocity of particle 1 = 1 773 m/s.
F is magnetic force = 5.75 × 10–3 n,
q₂ has a charge of 42.0 μc
v₂ is the velocity of 1.21 × 103 m/s.
[tex]\rm F_{B2}[/tex] is the magnitude of the magnetic force exerted on particle 2=?
The megnetic force for case 1 is found as;
[tex]\rm F_{B1}= qvB SIN \alpha_1 \\\\ 5.75 \times 10^{-3} =2.7 \times 10^{-6}\times 773 \times B sin 90^0 \\\\ B=\frac{5.75 \times 10^{-3}}{2.7 \times 10^{-6} \timesd 773 \times sin 90^0} \\\\ B=2.8 \ T[/tex]
The megnetic force for case 2 is found as;
[tex]\rm F_{B2} = q_2v_2bsin \alpha_2 \\\\ 42\times 10^{-6} \times 1.21 \times 10^3 \times 2.8 \times sin 55^0 \\\\ F_{B2}=0.12 T[/tex]
Hence the value of the megnetic force exerted on particle 2 will be 0.00122 T.
To learn more about the magnetic field refer to the link;
https://brainly.com/question/19542022
Answer:
last one and second one
Explanation:
Particle q1 has a charge of 2.7 μC and a velocity of 773 m/s. If it experiences a magnetic force of 5.75 × 10–3 N, what is the strength of the magnetic field?
2.8
T
In the same magnetic field, particle q2 has a charge of 42.0 μC and a velocity of 1.21 × 103 m/s. What is the magnitude of the magnetic force exerted on particle 2?
0.12
N
What do we call objects that form like a star (from a contracting gas cloud), but do not have enough mass to ignite hydrogen fusion in their centers
A brown dwarf is a starlike body that do do not have enough mass to ignite hydrogen fusion in their centers.
What is a brown dwarf?Brown dwarf refer to a body of substellar that is not huge or big enough to undergo nuclear fusion of o hydrogen into helium in their cores. This formed when there is contraction of gases in the intercellar spaces. The have a mass between 13 to 80 times that of Jupiter.
Therefore, brown dwarf is a starlike body that do don't not have enough mass to ignite hydrogen fusion in their centers.
Learn more about brown dwarf below.
https://brainly.com/question/15722167
At what distance does the electric field produced by a charge of -15 μc have a magnitude equal to 8. 7×104n/c?
Answer:
we'll use the electric field formula. ı wrote the formula in the photo.
Explanation:
The electric field formula is obtained by multiplying force and charge. When you apply this process I mentioned, you will find an electric field. then it is to write the given values and find the result. achievements.
At the distance for which the electric field produced by a charge of -15 μc have a magnitude equal to 8. 7×104n/c is 3.93 meters.
What is electric force?Electric force is the force of attraction of repulsion between two bodies.
According to the Coulombs law, the force of attraction of repulsion between charged two bodies is directly proportional to the product of charges of them and inversely proportional to the square of distance between them.
It can be given as,
[tex]F=k\dfrac{Q}{r^2}[/tex]
Here, (k) is the coulombs constant, (Q) is the charges and (r) is the distance between the two charges.
The charge of -15 μc have a magnitude equal to 8. 7×104n/c. Put this value in the above formula,
[tex]8.7\times10^4=(8.98\times10^{9})\dfrac{15\times10^{-6}}{r^2}\\r=3.93\rm\; m[/tex]
Thus, at the distance for which the electric field produced by a charge of -15 μc have a magnitude equal to 8. 7×104n/c is 3.93 meters.
Learn more about the electric force here;
https://brainly.com/question/14372859
#SPJ4
From the top of a tall cliff of height y, a soccer ball is kicked horizontally so that it leaves the cliff with a velocity v. Assuming air friction is negligible, the speed of the ball just before it hits the ground is:
Answer:
[tex]\sqrt{v^{2} + 2\, g\, y}[/tex].
Explanation:
Apply the SUVAT equation [tex]{v_{1}}^{2} - {v_{0}}^{2} = 2\, a\, x[/tex] to the vertical component of the soccer ball's motion to find the vertical velocity right before the ball lands. In this equation:
[tex]v_{1}[/tex] represents the vertical velocity of the ball right before it lands (needs to be found);[tex]v_{0}[/tex] represents the initial vertical velocity of the soccer ball ([tex]0[/tex] in this question since the ball was initially travelling horizontally); [tex]a[/tex] represents the acceleration (equal to [tex]g[/tex] since air friction is negligible);[tex]x[/tex] represents the vertical displacement of this ball (in this question, this vertical displacement is equal [tex]y[/tex], the height of the cliff.)Rearrange this equation to find an expression for the vertical velocity [tex]v_{1}[/tex] in terms of [tex]y[/tex] and [tex]g[/tex]:
[tex]\begin{aligned}v_{1} &= \sqrt{{v_{0}}^{2} + 2\, a\, x} \\ &= \sqrt{2\, g\, y}\end{aligned}[/tex].
Since air friction is negligible, the horizontal velocity of the ball would stay unchanged. Thus, the horizontal velocity of the ball would still be [tex]v[/tex] right before the ball lands.
Notice that these two components of velocity are perpendicular to one another. Thus, find the combined velocity of the ball right before landing could be found using Pythagorean's Theorem:
[tex]\sqrt{v^{2} + {v_{1}}^{2}} = \sqrt{v^{2} + 2\, g\, y}[/tex].
I have been made into a body that can fly to every country. even though I am light, I am very strong. mention my name and my property
Answer:
Aeroplane
Explanation:
they have tail surfaces to stabilize the wings
An object moving in the xy-plane is subjected to the force f⃗ =(2xyı^ 3yȷ^)n, where x and y are in m
The work done on the object moving in the xy-plane that is subjected to the given applied force is determined as (2ab²i + 3b²j) J.
Magnitude of the force on the objectThe magnitude of the force on the object is calculated as follows;
f = (2xyi + 3yj)
when;
x = a, and y = b
f = (2abi + 3bj)
Work done by the forceThe work done the applied force is the product of force and displacement of the object.
W = fΔs
where;
Δs is displacement of the objectΔx = a - a = 0
Δy = 0 - b = -b
Δs = √(Δx² + Δy²)
Δs = √(-b)²
Δs = b
W = (2abi + 3bj) x b
W = (2ab²i + 3b²j) J
Thus, the work done by the applied force on the object is (2ab²i + 3b²j) J.
The complete question is below;
An object moving in the xy-plane is subjected to the force f = (2xyi + 3yj), where x and y are in m. The particle moves from the origin to the point with coordinates (a, b) by moving first along the x-axis to (a, 0), then parallel to the y-axis. How much work does the force do?
Learn more about work done here: https://brainly.com/question/8119756
The work done on an item moving in the xy-plane that is subjected to a particular force is found as (2ab²i + 3b²j) J.
What is work done?Work done is defined as the product of applied force and the distance through which the body is displaced on which the force is applied.
Work may be zero, positive, and negative.it depends on the direction of the body displaced. if the body is displaced in the same direction of the force, it will be positive.
The given data in the problem is;
F is the force applied; f⃗ = (2xyi + 3yj)
Work done is found as the product of force and the body displacement;
[tex]\rm W = F \triangle S[/tex]
As the object is moving in the xy- plane. Displacement in the x direction;
[tex]\rm \triangle x = a-a \\\\ \triangle x =0[/tex]
Displacement in the y direction;
[tex]\rm \triangle y = 0-b \\\\ \rm \triangle y = -b \\\\[/tex]
The net displacement in the xy plane is;
[tex]\rm \triangle s= \sqrt{(\triangle x)^2+(\triangle y)^2 } \\\\\ \rm \triangle s= \sqrt{(0)^2+(-b)^2 } \\\\\ \triangle s= \sqrt{b^2} \\\\ \triangle s=b[/tex]
The work done is found as;
[tex]\rm W= F \triangle S \\\\ W=( 2 ab \vec i+3b \vec j) \triangle S\\\\ W= W=( 2 ab \vec i+3b \vec j) b \\\\\ W=(2ab^2 \vec i + 3b^2 \vec j)\ J[/tex]
Hence, the work done on an item moving in the xy-plane will be,[tex]\rm W=(2ab^2 \vec i + 3b^2 \vec j)\ J[/tex]
To learn more about the work done, refer to the link ;
https://brainly.com/question/3902440
#SPJ4
Why is it important to regulate temperatures in mammals
Answer:
If the body temperature falls below this temperature then enzymes will work too slowly for body process to occur fast enough the keep the mammal alive.
Explanation:
Does the electric potential energy increase, decrease, or stay the same? explain.
Answer:
Yes. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.
Explanation:
Answer:
Yes. Left. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.
What current is required in the windings of a long solenoid that has 1580 turns uniformly distributed over a length of 0.44 m in order to produce a magnetic field of magnitude 0.000394 T at the center of the solenoid
The current required in the windings of the given long solenoid that has 1580 turns uniformly distributed over the length of the solenoid is 1.98 A.
Magnetic field at the center of a solenoidThe magnetic field at the center of a solenoid is given by the following formula,
B = μ₀nI
where;
μ₀ is permeability of free space n is number of turnsI is current in the solenoidCurrent in the solenoidI = B/μ₀n
I = (0.00394) / (4π x 10⁻⁷ x 1580)
I = 1.98 A
Thus, the current required in the windings of the given long solenoid is 1.98 A.
Learn more about current in solenoid here: https://brainly.com/question/17086348
18. Students are discussing the magnitude of the electrostatic force that sphere B exerts on sphere A.
Eva states that sphere B exerts a larger electrostatic force on sphere A than sphere A does on sphere B.
. Taylor states that sphere B exerts the same electrostatic force on sphere A as sphere A does on sphere B.
• Jac states that sphere B exerts a smaller electrostatic force on sphere A than sphere A does on sphere B.
Which student is correct? Give scientific reasoning to support your decision.
she is k bads boy (into negative)
What is the mass of an object if it takes a net force of 2,400 Newtons
to accelerate it at a rate of 60 m/s??
Answer:
40 kg
Explanation:
F = ma
F / a = m
2400 / 60 = 40 kg
An object of mass 5kg falls from rest and has a kinetic energy of 1500J midway its journey.
a) what is its potential energy at this point?
b) what is the potential energy it started with?
c) what is it’s kinetic energy before hitting the ground?
Answer:
a) 1500 j
b) 3000 j
c) 34.64 m/s
Explanation:
at halfway point 1/2 of the potential energy has been converted to kinetic energy
so 1 /2 P E = 1500 j
it will still have the OTHER half of its PE 1500 j
c) PE will be entirely converted to KE when it is at the bottom
KE = 1/2 m v^2
3000 = 1/2 (5)(v^2) show v = 34.64 m/s