The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.
The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3 is a strong acid.
HF reaction in aqueous medium
HF + H2O --------- H3O+ + F -
RbF + H2O ---- Rb+ + F -
pH (Original) = pKa + log ( [salt ] / [Acid] )
We donot need to calculate pH original -which is for the original solution before adding the strong acid.
HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+ ion concentration much.
When a 0.012 mol of HNO3 is added to the buffer solution , it dissociates in H+ and NO-3 .
H+ ions dissociated from the Acid react with F - and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol and the salt concentration reduces by the same extent - 0.012 mol.
So the formula for New pH changes to
pH (New) = pKa + log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)
Here , 0.012 mol are added to 281 mL solution,
Concentration of HNO3, M = number of moles / Vol in litres
= 0.012 mol / 281 mL
= 0.012 mol / 281 / 1000
= [0.012 mol x 1000] / 281 L = 0.043 M
As pKa = -log(Ka) ,
Given [salt ] = 0.480 M , [Acid] = 0.318 M
= - log(Ka) + log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]
= - log (6.31 x 10-4 ) + log ( 0.437 / 0.361)
pH (New) = 3.20 + 0.083 = 3.283.
Learn more about pH value:
https://brainly.com/question/10603602
#SPJ4
Complete question:
A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)
how many moles of aspirin, c9h8o4, are in a tablet that contains 325 mg of aspirin? group of answer choices 0.555 moles 0.467 moles 0.357 moles 2.80 moles 0.00180 moles
The number of moles of aspirin, C₉H₈O₄, there are in a tablet that contains 325 mg of aspirin 0.00180 moles.
To calculate the number of moles of aspirin, the molar mass must first be determined. The molar mass of aspirin (C₉H₈O₄) is the sum of the atomic masses of each element in the compound, which are carbon (12.0107 g/mol), hydrogen (1.00794 g/mol), and oxygen (15.9994 g/mol). The total molar mass of aspirin is:
(9 x 12.0107) + (8 × 1.00794) + (4 × 15.9994) = 180.15 g/mol.
The number of moles of aspirin in a 325 mg tablet can be calculated by dividing its mass, 325 mg (0.325 g), by the molar mass of aspirin.
moles = mass/molar mass
Plugging in the values, we get:
moles = 325 mg(1 g/1000mg) / (180.15 g/mol) = 0.00180 moles
In conclusion, there are 0.00180 moles of aspirin, C₉H₈O₄, in a tablet that contains 325 mg of aspirin.
Learn more about moles here: https://brainly.com/question/14357742.
#SPJ11
explain why oxygen forms 2 bonds to hydrogen to make a water molecule, while nitrogen forms 3 bonds to make a molecule of ammonia
Oxygen and nitrogen are both nonmetals, meaning they form covalent bonds when they react.
Oxygen forms two covalent bonds with hydrogen because it has six valence electrons and needs two more electrons to complete its octet. Nitrogen has five valence electrons and needs three more electrons to complete its octet, so it forms three covalent bonds with hydrogen. The chemical formula for a water molecule is H2O, meaning that two hydrogen atoms are bonded to one oxygen atom. The chemical formula for ammonia is NH3, meaning that three hydrogen atoms are bonded to one nitrogen atom. The bond between hydrogen and oxygen is a polar covalent bond, while the bond between hydrogen and nitrogen is a non-polar covalent bond. This is due to the difference in electronegativity between oxygen and nitrogen, which causes oxygen to be more electronegative than nitrogen.
To know more about electronegativity click on below link :
https://brainly.com/question/17762711#
#SPJ11
How many chlorine atoms are there in 4 molecules of HCl?
Answer: Hydrogen chloride is a diatomic molecule, consisting of a hydrogen atom H and a chlorine atom Cl connected by a polar covalent bond.
if molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy which molecule will be moving the fastest? a) hydrogen b) nitrogen c) oxygen d) chlorine e) all molecules will have the same speed.
The answer to the question is "e) all molecules will have the same speed." This is because all molecules, regardless of what elements they are made up of, have the same kinetic energy, so they will be moving at the same speed.
To better understand this concept, it is important to note that kinetic energy is the energy of an object due to its motion. Kinetic energy is determined by the mass and speed of the object, with the equation being KE = 1/2 x m x v^2 (where m is the mass and v is the velocity). So, if two objects have the same kinetic energy, they must have the same velocity, regardless of their mass.
As all molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy, they must also have the same velocity, meaning that all molecules will be moving at the same speed. This is because the molecules' masses differ, but as the kinetic energy is the same, the velocity must be the same as well.
It is also important to note that kinetic energy is not the same as momentum. Momentum is determined by the mass and velocity of an object, but is not dependent on the kinetic energy of the object. So, while all molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy, they may still have different momentum, due to their different masses.
In conclusion, all molecules of hydrogen, nitrogen, oxygen and chlorine will have the same speed, as they all have the same kinetic energy.
Learn more about Kinetic energy here:
https://brainly.com/question/15764612#
#SPJ11
For another researcher's data the starting mass of apparatus + solid was 113.249 g. After the reaction was complete the apparatus was reweighed. The resulting mass was 113.276 g. Which of the following could have caused the mass gain?
Select all that apply
Group of answer choices
The apparatus had a gas leak and room air could enter the apparatus.
The apparatus picked up extra water droplets between weighings
They forgot to weigh the mass of the gas-generating solid before the reaction.
Matter was created in the reaction.
The mass gain that happened after the reaction could have been caused due to the matter was created in the reaction .
What is mass gain?
In physics, mass gain refers to an increase in mass in a chemical or nuclear reaction. It is the difference between the mass of the reactants and the mass of the products after a chemical reaction has occurred.
What happened in the given problem?
According to the given problem, the starting mass of the apparatus and solid was 113.249 g. After the reaction was complete, the apparatus was reweighed. The resulting mass was 113.276 g. The problem asks which of the following could have caused the mass gain.
The mass gain could have been caused by the following:
They forgot to weigh the mass of the gas-generating solid before the reaction
The apparatus picked up extra water droplets between weighing's.
Matter was created in the reaction.
The apparatus picked up extra water droplets between weighings, but they forgot to weigh the mass of the gas-generating solid before the reaction, and matter was created in the reaction.
To know more about the mass https://brainly.com/question/19694949
#SPJ11
How much faster will lithium gas diffuse than potassium has
Lithium gas would diffuse approximately 3.08 times faster than potassium gas, assuming that the temperature and pressure are constant
What is diffusion ?
Diffusion is a physical process in which particles of a substance move from an area of high concentration to an area of low concentration. It is a fundamental process in nature that plays a crucial role in various biological, chemical, and physical phenomena. Diffusion occurs due to the random movement of particles, which causes them to spread out until they reach an equilibrium state. This process is driven by the tendency of particles to move from regions of high energy to regions of lower energy. Diffusion is affected by several factors, such as the temperature, pressure, and molecular weight of the substance. It is an essential mechanism for transport of nutrients, gases, and other molecules across cell membranes, as well as in many industrial and environmental applications.
The rate of diffusion of a gas is dependent on several factors such as the temperature, pressure, and molecular weight of the gas. Assuming that the temperature and pressure are constant, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight.
The molecular weight of lithium is 6.94 g/mol while that of potassium is 39.1 g/mol. Therefore, the square root of the ratio of their molecular weights would be the factor by which lithium gas diffuses faster than potassium gas.
The square root of the ratio of their molecular weights is:
√(39.1/6.94) = 3.08
Therefore, lithium gas would diffuse approximately 3.08 times faster than potassium gas, assuming that the temperature and pressure are constant.
To know more about Diffusion visit :-
https://brainly.com/question/94094
#SPJ1
76.33 grams of NaCl were collected after experiment. How many moles were
produced?
76.33 grams of NaCl were collected after experiment 1.306 mol were
produced.
What is mole formula?Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.
Mass of material / mass of one mole equals the number of moles.
We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.
The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:
Molar mass of NaCl
= (1 x atomic mass of Na) + (1 x atomic mass of Cl)
= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)
= 58.44 g/mol
The mass of gathered NaCl may now be converted into moles using the molar mass:
Mass of NaCl divided by its molar mass yields moles of NaCl.
moles of NaCl = 76.33 g / 58.44 g/mol
moles of NaCl = 1.306 mol
As a result, the experiment generated 1.306 moles of NaCl.
To know more about Moles visit:
https://brainly.com/question/21323029
#SPJ1
How many atoms are in 32.10 g of He
Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.
Definition of molar massThe molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.
Definition of Avogadro's NumberAvogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.
Its value is 6.023×10²³ particles per mole.
Amount of moles of 32.10 g of HeThe molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?
moles= (32.10 grams × 1 mole)÷ 4 grams
moles= 8.025 moles
The amount of moles of He in 32.19 grams is 8.025 moles.
Amount of atoms of 32.10 g of HeYou can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?
amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole
amount of atoms of He= 4.83×10²⁴ atoms
Finally, 4.83×10²⁴ atoms of He are present.
Learn more about Avogadro's Number:
brainly.com/question/11907018
#SPJ1
2.37-l container is filled with 186 g argon. (a) if the pressure is 10.0 atm, what is the temperature? webassign will check your answer for the correct number of significant figures. k (b) if the temperature is 225 k, what is the pressure?
(a) If the pressure is 10.0 atm, the temperature is 62.0 K.
(b) if the temperature is 225 k, the pressure is 36.3 atm.
a) In order to calculate the temperature, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume of the container, n is the number of moles of argon, R is the ideal gas constant, and T is the temperature.
We can calculate the number of moles, n, by using the molar mass of argon, which is 39.948 g/mol.
We have n = 186 g / 39.948 g/mol = 4.656 mol.
So we can plug in our values and solve for T:
T = (10.0 atm)(2.37 L) / (4.666 mol)(0.08206 L·atm/mol·K) = 62.0 K.
b) To calculate the pressure, we can again use the ideal gas law, PV = nRT. We know the values of n, R, and T from the previous question.
Since the volume of the container is given, we can plug in these values to solve for P:
P = (4.666 mol)(0.08206 L·atm/mol·K)(225 K) / 2.37 L = 36.3 atm.
Learn more about ideal gas law here: https://brainly.com/question/27870704.
#SPJ11
What is one way that the layers of the atmosphere help to maintain life on Earth?
One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.
The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.
To know more about scattering click here:
brainly.com/question/3292565
#SPJ4
which one of the following amino acids r groups (a.k.a. side chain) is most likely to participate in hydrogen bonding with water? group of answer choices asparagine alanine leucine phenylalanine valine
The amino acid most likely to participate in hydrogen bonding with water is Asparagine.
Asparagine has an amide group (–CONH2) as its side chain, which is polar and can form hydrogen bonds with water.
Hydrogen bonds are a type of intermolecular force that occurs when a hydrogen atom of one molecule is attracted to an electronegative atom (usually oxygen or nitrogen) of another molecule.
In water, these hydrogen bonds help to stabilize the molecules and increase its boiling point.
The other amino acid side chains are not likely to form hydrogen bonds with water. Alanine has a methyl group (–CH3), which is non-polar and not able to form hydrogen bonds.
Leucine and valine both have an isopropyl group (–CH(CH3)2), which is also non-polar. Finally, Phenylalanine has a phenyl group (–C6H5), which is slightly polar, but not to the same extent as the amide group of Asparagine.
In conclusion, Asparagine is the amino acid side chain most likely to form hydrogen bonds with water. The other amino acid side chains are not able to form hydrogen bonds due to their non-polar nature.
Hydrogen bonds between Asparagine and water help to stabilize the molecules and increase its boiling point.
to know more about asparagine refer here:
https://brainly.com/question/30714122#
#SPJ11
for a second order reaction with an initial concentration of reactant of 64 m, what concentration of the reactant is left after three half lives?
After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.
A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:
r = k[A]²
The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:
t½ = 1 / (k[A]₀)
Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2
After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4
After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8
Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:
[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M
Therefore, the concentration of the reactant that is left after three half-lives is 8 M.
For more such questions on half-life , Visit:
https://brainly.com/question/23191712
#SPJ11
What does Einstein's famous equation say that all matter is?
concentrated supernovas that have condensed into dwarfs
concentrated energy that has condensed into the atoms
concentrated atoms that have condensed into protons
concentrated nebulas that have been condensed into red giants
Einstein's famous equation say that all matter is option B. concentrated energy that has condensed into the atoms.
What is Einstein's famous equation?When combined with the speed of light, Einstein's famous equation E=mc2 demonstrates mathematically that energy and matter are one and the same. m stands for mass, c for the speed of light, and E stands for energy. This equation states that all matter is simply concentrated energy that has condensed into atoms.
Einstein's famous equation is E=mc², which expresses the relationship between mass (m) and energy (E), and the constant speed of light (c) in a vacuum. This equation shows that mass and energy are interchangeable, and that a small amount of mass can be converted into a large amount of energy, as demonstrated in nuclear reactions.
Learn more about Einstein at:
https://brainly.com/question/26366397
#SPJ1
What aldehyde is needed to prepare the carboxylic acid by an oxidation reaction?
Answer:
The oxidation of an aldehyde can be achieved using a variety of oxidizing agents, including potassium permanganate (KMnO4), chromium trioxide (CrO3), and silver oxide (Ag2O). The specific oxidizing agent used will depend on the conditions and desired yield.
For example, if we want to prepare acetic acid, we can oxidize ethanol (an alcohol) using a strong oxidizing agent like potassium permanganate. Alternatively, we can oxidize acetaldehyde (an aldehyde) using a milder oxidizing agent like silver oxide.
Therefore, any aldehyde can be used to prepare a carboxylic acid by oxidation, but the specific oxidizing agent and reaction conditions may vary depending on the aldehyde and desired yield.
The aldehyde that is need for the preparation of the acid is CH3(CH2)8CH(Cl)CHO
How do you prepare an acid from an aldehyde?It is not possible to directly prepare an acid from an aldehyde as an aldehyde is already an oxidized form of a primary alcohol, which can be further oxidized to form a carboxylic acid.
Aldehydes can be oxidized to carboxylic acids using strong oxidizing agents such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). The reaction conditions need to be carefully controlled to avoid over-oxidation of the aldehyde to carbon dioxide.
Learn more about aldehyde:https://brainly.com/question/30665943
#SPJ1
which solute will have a more negative enthalpy of solution, assuming the same solvent is used and the solvent-solute interactions are the same in both cases: csi or lif?
CsI (cesium iodide) is expected to have a more negative enthalpy of solution compared to LiF (lithium fluoride), assuming the same solvent is used and the solvent-solute interactions are the same in both cases.
What is the enthalpy of solution?The enthalpy of solution is the energy released or absorbed when a solute dissolves in a solvent. The enthalpy of solution is negative if energy is released when the solute dissolves, indicating that the solution is exothermic.
CsI is expected to have a more negative enthalpy of solution compared to LiF because CsI has larger ions with a higher charge than LiF, and larger ions with higher charge tend to have stronger interactions with solvent molecules, leading to a more negative enthalpy of solution.
Learn about enthalpy here https://brainly.com/question/3836944
#SPJ1
which species is diamagnetic? which species is diamagnetic? si s i co3 c o 3 ba2 b a 2 ni3 n i 3
Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Explanation:
Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.
Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.
The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.
Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Learn more about diamagnetism here:
https://brainly.com/question/15462756#
#SPJ11
Which of these is not a component of Rutherford’s model of the atom?
The Rutherford's model lacks an atom's electrical structure and electromagnetic radiation.
What elements make up Rutherford's atomic model?According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called Like planets circle the Sun, electrons also travel a great distance around it. Rutherford discovered that an atom's interior is mostly empty.
What does Rutherford's conclusion leave out?Rutherford's alpha scattering experiment did not come to any conclusions on how quickly positively charged particles travel. The nucleus, or core, of the atom contains the positively charged particles.
To know more about Rutherford's model visit:-
https://brainly.com/question/11749615
#SPJ1
benzene has bp of 80oc, toluene has bp of 110 oc and xylene has boiling point of 130 oc. the gc of a mixture of these three compounds should show retention times as
Answer: Benzene has a boiling point of 80oC, toluene has a boiling point of 110 oC, and xylene has a boiling point of 130 oC. The GC of a mixture of these three compounds should show retention times as benzene, toluene, xylene.
The GC of a mixture of these three compounds should show retention times as. The correct answer is Option C; benzene, toluene, xylene. The boiling points of the components indicate that they have different volatility.
Therefore, the order of volatility follows the order in which they have been mentioned in the question;
benzene < toluene < xylene
This means that as the boiling point increases, the retention time of each compound in the column also increases. Since the order of volatility is benzene < toluene < xylene, the retention times of the compounds will be as follows; benzene will have the least retention time, followed by toluene and then xylene, with the largest retention time.
Therefore, the GC of a mixture of these three compounds should show retention times as benzene, toluene, and xylene.
Learn more about retention here:
https://brainly.com/question/29709076#
#SPJ11
consider the compounds cl2, hcl, f2, naf, and hf. which compound has a boiling point closest to that of argon? explain.
The compound that has a boiling point closest to that of Argon is HF. This is because HF has the strongest intermolecular forces (hydrogen bonding) among the given compounds.
The boiling point of a compound depends on the strength of the intermolecular forces that exist between the molecules. The stronger the intermolecular forces, the higher the boiling point.
The weaker the intermolecular forces, the lower the boiling point. The boiling point of Argon is -186°C. Out of the given compounds, the boiling point of HF is the closest to the boiling point of Argon.
The boiling point of HF is -83.8°C. This is because HF has hydrogen bonding which is the strongest intermolecular force among the given compounds. The other compounds such as Cl2, F2, HCl, and NaF, have weaker intermolecular forces than HF. Therefore, they have a lower boiling point than HF.
Learn more about HF here:
https://brainly.com/question/14581360#
#SPJ11
What is the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm?
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm can be calculated using the Ideal Gas Law. The Ideal Gas Law is expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature.
In this case, we know that the pressure is 2.05 atm and the volume is 2 L. We also know that helium is a monoatomic gas with a molar mass of 4 g/mol. We can use the universal gas constant R = 0.0821 L atm/mol K. Plugging in these values, we get:
2.05 atm × 2 L = n × 0.0821 L atm/mol K × T
Dividing both sides by 0.0821 L atm/mol K gives:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × T)
Simplifying, n = 50 T / R. We can now solve for T: n = 50 T / R => T = nR / 50
Substituting in the values we have:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × 1 mol / 4 g)
= 24.88 molT = (24.88 mol × 0.0821 L atm/mol K) / 50
= 0.04111 K or 41.11 °C.
Therefore, the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
To learn more about temperature; https://brainly.com/question/25677592
#SPJ11
a vessel contains 112 1 2 l of milk. john drinks 14 1 4 l of milk; joe drinks 12 1 2 l of milk. how much of milk is left in the vessel?
There is 73 3/4 liters of milk left in the vessel.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel. 112 1/2 liters of milk was the total amount of milk in the vessel, so if we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel.
Calculate the total amount of milk that was consumed.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel.
Calculate the amount of milk left in the vessel.
The total amount of milk in the vessel was 112 1/2 liters. If we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel: 112 1/2 liters - 26 3/4 liters = 73 3/4 liters.
In this problem, we needed to calculate the amount of milk left in the vessel after two people drank from it. We did this by first calculating the total amount of milk that was consumed (John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk). Then, we calculated the remaining amount of milk left in the vessel by subtracting the amount of milk consumed from the total amount of milk in the vessel (112 1/2 liters - 26 3/4 liters = 73 3/4 liters).
To know more about diluted milk click on below link :
https://brainly.com/question/30203634#
#SPJ11
a 250.ml sample of oxygen gas is collected over water at 25oc and 760.0 torr pressure. what is the pressure of the dry gas alone? (vapor pressure of water at 25oc is 23.8torr)
The pressure of the dry gas alone can be calculated using the ideal gas law: PV = nRT and the pressure is 736.2 torr.
The pressure of dry gas alone is 736.2 torr. Step-by-step explanation: Given that, the Volume of oxygen gas = 250 ml. Temperature = 25 oC Pressure = 760 torr, Vapor pressure of water at 25 oC = 23.8 torrTo find: The pressure of the dry gas alone.
Formula used,V2 = (P1 - P2) * (V1 - Vw) / P2Where,V2 = Volume of gas aloneP1 = Pressure of gas collectedP2 = Vapor pressure of water at temperature T1V1 = Volume of gas collected Vw = Volume of water vapor formedCalculation,P1 = 760 torrP2 = 23.8 torrV1 = 250 mlVw = V1 * P2 / P1= 250 * 23.8 / 760= 7.84 mlV2 = (P1 - P2) * (V1 - Vw) / P2= (760 - 23.8) * (250 - 7.84) / 760= 231.82 mlPressure of dry gas alone = P1 * V2 / V1= 760 * 231.82 / 250= 736.2 torr.
Hence, the pressure of the dry gas alone is 736.2 torr.
Read more about torr:
https://brainly.com/question/14797048
#SPJ11
4. what is conjugation? (cite any sources) does it make sense that one dye absorbs light of a higher or lower wavelength based on the degree of conjugation? (for a complete answer, you should correlate the approximate wavelength of light absorbed by your synthetic dyes with the conjugation present in each of their chemical structures.)
Conjugation is the process of connecting multiple double bonds or lone pairs of electrons in a molecule or chemical structure.
Conjugation affects the absorption of light in a dye. Dyes with conjugated structures will absorb light of lower wavelength than those without conjugated structures. For example, a synthetic dye with two double bonds will absorb light of lower wavelength than one with just one double bond. The degree of conjugation in a chemical structure will affect the amount of light absorbed and the wavelength of the light that is absorbed.
The approximate wavelength of light absorbed by synthetic dyes is related to the degree of conjugation in the chemical structure. A dye with more conjugated double bonds or lone pairs will absorb light of a lower wavelength than one with fewer conjugated double bonds or lone pairs. For example, a dye with four double bonds will absorb light of a lower wavelength than one with three double bonds. The longer the conjugation, the lower the wavelength of light absorbed.
In conclusion, the degree of conjugation present in a chemical structure affects the amount and wavelength of light absorbed by a dye. The longer the conjugation, the lower the wavelength of light absorbed.
To know more about conjugation click here:
https://brainly.com/question/30907314
#SPJ11
5. based on the tolerance table for volumetric glassware, the volume of a 25 ml volumetric pipet and volumetric flask is understood to be
The volume of a 25 ml volumetric pipet and volumetric flask is understood to be 25.00 mL ± 0.06 mL according to the tolerance table for volumetric glassware.
Explanation: Based on the tolerance table for volumetric glassware, the volume of a 25 ml volumetric pipet and volumetric flask is understood to be±0.03 mL.What is Volumetric Glassware?Volumetric glassware is laboratory equipment that measures precise volumes of liquids. Volumetric glassware is used in a variety of laboratory settings, including analytical chemistry and clinical chemistry. Volumetric glassware is designed to measure liquids accurately, but it is only accurate if it is used correctly.What is the Tolerance Table?A tolerance table is a table of values that specifies the maximum deviation of a specific measuring device from the true value. The tolerance is the range of allowable deviations that are accepted. Tolerance, expressed in terms of volume, is determined by testing and comparing the volume measurements of each piece of volumetric glassware to a reference standard.How is the Tolerance Table for Volumetric Glassware Used?The tolerance table for volumetric glassware is used to determine the allowable variation from the true value of the liquid in the vessel. The tolerance table provides the range of possible values that are considered acceptable. This range is determined by testing the volumetric glassware against a reference standard in a controlled environment. The allowable error for each type of volumetric glassware is specified in the tolerance table. The tolerances are typically expressed in terms of volume in milliliters. For example, a 25 mL volumetric pipet may have a tolerance of ±0.03 mL.
For more such questions on Volumetric flask
https://brainly.com/question/17053656
#SPJ11
the temperature of a constant volume of gas at 1.00 atm is 25 oc. in order to increase the pressure to 2.00 atm, what temperature is needed?
Answer: 323 degrees Celsius :)
Explanation:
write a molecular equation for the gas evolution reaction that occurs when you mix aqueous hydrobromic acid and aqueous lithium sulfite.
The molecular equation for the gas evolution reaction between aqueous hydrobromic acid (HBr) and aqueous lithium sulfite (Li2SO3) is as follows: 2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} So_{3}[/tex] (aq)
In this reaction, hydrobromic acid (HBr) reacts with lithium sulfite ([tex]Li_{2} So_{3}[/tex]) to form lithium bromide (LiBr) and sulfurous acid ([tex]H_{2} So_{3}[/tex]). The sulfurous acid is unstable and decomposes into water( [tex]H_{2o[/tex]) and sulfur dioxide gas ([tex]So_{2}[/tex]):
[tex]H_{2} So_{3}[/tex] (aq) → [tex]H_{2} 0[/tex]l) + [tex]So_{2}[/tex] (g)
The overall reaction is:
2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} o[/tex] (l) + [tex]So_{2}[/tex] (g)
In this gas evolution reaction, the mixing of the two aqueous solutions results in the formation of a new compound, lithium bromide, which remains dissolved in the solution. The other product, sulfurous acid, decomposes into water and sulfur dioxide gas, which is released as bubbles in the solution. This release of gas is the characteristic feature of gas evolution reactions.
Know more about sulfurous acid here:
https://brainly.com/question/1084323
#SPJ11
write the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen
The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.
In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.
Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
To know more about catalyst click on below link :
https://brainly.com/question/24430084#
#SPJ11
How many grams of chlorine gas can be liberated from the decomposition of 169. 0 g. Of AuCl3
169.0 g of [tex]AuCl _{3}[/tex] can liberate 118.4 g of [tex]Cl_{2}[/tex] gas upon decomposition. The molar mass of [tex]AuCl _{3}[/tex] is 303.33 g/mol, which means that 1 mole of [tex]AuCl _{3}[/tex]contains 3 moles of chlorine (3 atoms of chlorine).
To determine the moles of [tex]AuCl _{3}[/tex]in 169.0 g, we divide the mass by the molar mass:
169.0 g / 303.33 g/mol = 0.557 moles of [tex]AuCl _{3}[/tex]
Since each mole of [tex]AuCl _{3}[/tex] produces 3 moles of chlorine, the total moles of chlorine that can be liberated from the decomposition of 0.557 moles of [tex]AuCl _{3}[/tex]is:
0.557 moles x 3 = 1.671 moles of [tex]Cl_{2}[/tex]
Finally, we use the molar mass of chlorine ([tex]Cl_{2}[/tex]), which is 70.90 g/mol, to convert the moles of [tex]Cl_{2}[/tex]to grams:
1.671 moles x 70.90 g/mol = 118.4 g of [tex]Cl_{2}[/tex]
Therefore, 169.0 g of [tex]AuCl _{3}[/tex]can liberate 118.4 g of [tex]Cl_{2}[/tex]gas upon decomposition.
Learn more about molar mass
https://brainly.com/question/22997914
#SPJ4
a) select the best set of reagents for the transformation. an alkene bonded to a tert butyl group and three hydrogens is transformed to a tert butyl group bonded to c h 2 c h 2 o h. the best reagents are:
To transform an alkene bonded to a tert-butyl group and three hydrogens to a tert-butyl group bonded to CH2CH2OH, the best reagents are H2SO4 and H2O.
H2SO4 is used to protonate the double bond and form a carbocation, which can then undergo nucleophilic attack by water to form the final product. This reaction is known as hydration of alkenes.To perform the transformation, the alkene is first protonated with H2SO4 to form a carbocation intermediate.
Water acts as a nucleophile and attacks the carbocation to form the alcohol product. This reaction is shown below:Thus, the final product formed is tert-butyl group bonded to CH2CH2OH.Another way to perform this transformation is by using oxymercuration-demercuration.
In this reaction, the alkene is first treated with mercuric acetate and water to form a cyclic intermediate.
Know more about nucleophile here:
https://brainly.com/question/27127109
#SPJ11
write the equilibrium equation established in a saturated potassium chloride, kcl, solution. equilibrium reaction:
The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:
KCl(s) ⇌ K+(aq) + Cl-(aq)
What is Equilibrium?
In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.
In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ1