If Jordan escapes, he will be 61 m behind the lion, , the lion will be 6m away from the land rover when it catches Jordan.
Jordan takes 1 second to react and turn around, and then he runs at a velocity of 5 m/s. This means that he will reach the land rover in (6m / 5m/s) = 1.2 seconds. At the same time, the lion is running at a velocity of 50 km/h, which is (50 km/h * (1000m/1 km)) / (60s/1min) = 833.33 m/s. This means that the lion will reach Jordan in (26m / 833.33m/s) = 0.031 seconds.
Jordan will reach the land rover before the lion reaches him, so he escapes. Since the lion started 26m away, and has a velocity of 833.33 m/s, it will take (26m / 833.33m/s) = 0.031 seconds for the lion to cover the 26m and reach Jordan. In this same amount of time, Jordan will have covered (0.031s * 5m/s) = 0.155 m. Therefore, Jordan will be 61m behind the lion.
If Jordan is caught, he will be 6m away from the land rover. This is because the land rover is 6m away from him and the lion started 26m away from him, but will reach Jordan after 0.031s. This means that the lion will cover a distance of (0.031s * 833.33m/s) = 25.94m in that time, and Jordan will only cover (0.031s * 5m/s) = 0.155m. Therefore, the lion will be 6m away from the land rover when it catches Jordan.
Read more about time:
https://brainly.com/question/26046491
#SPJ11
name the seven major divisions of the electromagnetic spectrum, and give the range of frequencies they encompass.
The seven major divisions of the electromagnetic spectrum are Radio Waves, Microwaves, Infrared Radiation, Visible Light, Ultraviolet Light, X-Rays, and Gamma Rays.
To know more about the electromagnetic spectrum, refer here:
https://brainly.com/question/23727978#
#SPJ11
How many units of energy are consumed if one uses 10 litres of petrol
Depending on the formulation, gasoline's energy content can vary, but a standard approximation states that one liter of gasoline has around 34 megajoules (MJ) of energy in it.
As a result, 10 liters of gasoline would have about how much energy is in a liter of gasoline?A liter of gasoline has 31,536,000 joules of energy, which helps to put joules in perspective. A kilowatt-hour has a joule value of 3,600,000. Hence, the energy contained in a liter of gasoline is 8.76 kW/hr,
which is a much more manageable value. How many kilometers are in 10 liters of gasoline?Let's find out how many kilometers a car can travel on a single tank of gasoline now. The distance driven here is 145 kilometers of distance in 10 litres. So, in 10 litres = 145 km distance covered. That is, in one litre of petrol a car travels a total distance of 14.5 km.
To know more about energy visit:-
brainly.com/question/1932868
#SPJ9
Compare and contrast how heat flows between a person and the environment for someone submerged in water and for someone in the air
Heat transfer between a person and the environment occurs through the processes of convection, conduction, and radiation. The rate of heat transfer depends on factors such as the temperature difference between the person.
What is a conduction ?Conduction is a process of heat transfer that occurs through a material or between two materials that are in direct contact with each other. In this process, heat flows from a region of higher temperature to a region of lower temperature through molecular collisions. The heat energy is transferred through the material or the contact surface by means of the vibration and movement of the molecules.
Conduction is responsible for heat transfer in solids, such as metals, ceramics, and polymers, and it can also occur between different solids in contact with each other. The rate of conduction depends on several factors, including the thermal conductivity of the material, the temperature difference between the two regions, the thickness of the material, and the surface area of contact.
To know more about Conduction visit :
https://brainly.com/question/12136944
#SPJ1
The cord from an appliance is too short to reach the wall outlet in your room. You have two extension cords to choose from. (a) Find the voltage drop in the first extension cord having a 0.0760 ? resistance and through which 5.60 A is flowing. V (b) The second extension cord is cheaper and utilizes thinner wire. It has a resistance of 0.760 ? and the current flowing through it is 5.60 A. By what amount does the voltage supplied to the appliance change when the first extension cord is replaced by the second?
When the first extension cord is replaced by the second then the voltage supplied to the appliance drops by 3.834 V.
The voltage drop in the first extension cord can be calculated using Ohm's law:
V = IR
where V is the voltage drop, I is current, and R is the resistance.
The voltage drop in the first extension cord is V = IR = (5.60 A) x (0.0760 Ω) = 0.4256 V.
The voltage drop across the second extension cord is also V = IR = (5.60 A) x (0.760 Ω) = 4.256 V.
Therefore, the voltage supplied to the appliance changes by (0.4256 V - 4.256 V) = - 3.8304 V when the first extension cord is replaced by the second.
Extension cords are useful for transferring power to areas where there are no outlets, and they can also come in handy in places where outlets are inaccessible. However, if you have two extension cords to choose from, the voltage drop in each cord can impact the amount of voltage supplied to the appliance.
Learn more about Ohm's law:
https://brainly.com/question/14296509
#SPJ11
why does the pressure rise as the volume of a cylinder filled with a gas is decreased by a piston? multiple choice question. gas particles move faster in a smaller volume. collisions with the walls are more frequent. collisions of gas particles with each other are more frequent.
When the volume of a cylinder filled with a gas is decreased by a piston, the pressure inside rises because of the increased frequency of collisions between gas particles.
This is due to the fact that when the available space is reduced, the particles are forced to move faster in order to maintain their average kinetic energy. Furthermore, the number of collisions between gas particles and the walls of the container increases, resulting in a higher pressure.
Additionally, as the volume decreases, the number of collisions between gas particles and each other increases, which also contributes to the rise in pressure. Therefore, when the volume of a cylinder filled with a gas is decreased by a piston, the pressure inside will rise due to the increased frequency of collisions between gas particles.
Know more about kinetic energy here
https://brainly.com/question/15764612#
#SPJ11
What is the mass of an object if a force of 30 N causes it to accelerate at 1. 5 m/s/s?
The mass of an object if a force of 30 N causes it to accelerate at 1. 5 m/s^2 is 11.33
Newton's second law results in force = mass times acceleration
17 = mass x 1.5
mass = 17/1.5
mass = 11.33
Force is a physical amount that describes the interplay between items. it's far a vector quantity, which means it has both magnitude and course. Force can cause an object to accelerate or change its shape. According to Newton's first law of motion, an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force.
Newton's second law of motion relates force to acceleration, stating that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Newton's third law of motion states that every action has an equal and opposite reaction, meaning that when two objects interact, they exert equal and opposite forces on each other. There are many types of forces, including gravitational, electromagnetic, frictional, and normal.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
suppose the frequency of a note on an organ is 15 hz. what is the shortest organ pipe with both ends open that will resonate at this frequency? the velocity of sound in air is 343 m/s. answer in units of m.
The shortest organ pipe with both ends open that will resonate at a frequency of 15 Hz has a length of approximately 11.43 meters.
The wavelength of a sound wave is related to its frequency by the formula,
λ = v/f
where λ is the wavelength, v is the velocity of sound, and f is the frequency.
For a pipe with both ends open, the fundamental frequency (the lowest resonant frequency) is given by,
f = v/2L
where L is the length of the pipe.
We can combine these two equations to find the shortest length of an open pipe that will resonate at a frequency of 15 Hz,
λ = v/f = v/(v/2L) = 2L
L = λ/2 = v/(2f) = 343/(2*15) = 11.43 m
To know more about frequency, here
brainly.com/question/14634898
#SPJ4
As a particle moves 12 meters along an electric field of strength of 80 Newtons per Coulomb its electrical potential energy decreases by 5.2 x 10^-18 Joules.
What is the particle charge?
Giving out brainliest please help this is due today.
Answer:
The electric potential energy (EPE) of a particle with charge q moving through an electric field of strength E over a distance d is given by the formula:
EPE = qEd
In this problem, we are given:
EPE = 5.2 x 10^-18 J
E = 80 N/C
d = 12 m
Substituting these values into the formula, we get:
5.2 x 10^-18 J = q(80 N/C)(12 m)
q = 5.2 x 10^-18 J / (80 N/C)(12 m)
q = 6.875 x 10^-21 C
Therefore, the particle charge is 6.875 x 10^-21 Coulombs.
Explanation:
BRAINLIEST PLEASE!
a block of mass 5.0 kg is acted upon by a single force, producing an acceleration of 2.0 m/s2. the force has a value of
The force that is acted upon a block of mass 5.0 kg producing an acceleration of 2.0 m/s2 is 10 N.
What is Newton's Second Law of Motion?
The Second Law of Motion, often referred to as the law of force and acceleration, states that the force applied to an object is directly proportional to its mass and acceleration.
Newton's Second Law of Motion states that the force exerted on an object is directly proportional to its mass and acceleration.
The law states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass.
In mathematical terms:
F = m*a
Where: F is the force acting on the object, m is the mass of the object, a is the acceleration produced by the force.
Following this formula, the force that is acted upon a block of mass 5.0 kg producing an acceleration of 2.0 m/s2 is given as:
F = m * a
F = 5.0 kg * 2.0 m/s2F = 10 N
Therefore, the force that is acted upon a block of mass 5.0 kg producing an acceleration of 2.0 m/s2 is 10 N.
Learn more about Second Law of Motion here:
https://brainly.com/question/31108613#
#SPJ11
a ball of mass 0.600 kg is carefully balanced on a shelf that is 2.10 m above the ground. what is its gravitational potential energy?
The gravitational potential energy of the 0.600 kg ball balanced on a shelf 2.10 m above the ground is 12.24 J.
The gravitational potential energy of an object is calculated by the equation:
PE = mgh, where m is the mass of the object, g is the gravitational acceleration, and h is the height above the ground.
1. Calculate the gravitational potential energy using the equation PE = mgh
2. Substitute in the known values: 0.600 kg for m, 9.81 m/s2 for g, and 2.10 m for h
3. Calculate the gravitational potential energy: 12.24 J (12.24 J = 0.600 kg x 9.81 m/s2 x 2.10 m)
Therefore, the gravitational potential energy of the ball is 12.24 J (12.24 J = 0.600 kg x 9.81 m/s2 x 2.10 m).
To know more about gravitational potential energy click here:
https://brainly.com/question/19768887
#SPJ11
an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2. after 5 seconds, the object will have a speed of
Answer : If an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2 then after 5 seconds, the object will have a speed of 100 m/s
This can be calculated using the equation v = a*t, where v is the velocity, a is the acceleration due to gravity, and t is the time elapsed. Therefore, in this case, v = 20 m/s2 * 5 s = 100 m/s. These values are given in question, so we just have to put them in equation.
Since the object is falling freely, its acceleration remains constant and it follows a uniform acceleration motion. Therefore, the velocity of the object will increase linearly with time. After 10 seconds, the velocity will double to 200 m/s, and so on.
Know more about gravity here:
https://brainly.com/question/14874038
#SPJ11
should it be limited to 60% charge too when playing? or is it different for gaming than light tasks?
No, it is not necessary to limit the charge of your device to 60% when gaming. When it comes to gaming, it is recommended to charge your device between 40-90%.
This is because if your device is fully charged, it may reduce the lifespan of your battery and make it more vulnerable to heat-related damage.
As for light tasks such as web browsing and email, it is best to keep your device's charge between 30-60% in order to maximize battery life.
When it comes to gaming, you should make sure your device is not exposed to extremely high temperatures or charged beyond the recommended range.
Overcharging can damage the battery and lead to overheating which can reduce the performance of your device.
It is important to check the power settings of your device to ensure that your device is not wasting too much power. You can do this by going to the Settings of your device and accessing the Battery menu.
From there you can check what apps are draining the most power and set up the device to reduce power usage.
It is important to maintain the charge of your device in the recommended range while playing games, between 40-90%.
Doing so will help ensure the longevity of your battery and reduce the risk of heat-related damage. Additionally, you should keep an eye on your power settings to ensure that your device is not wasting too much power.
to know more about charge refer here:
https://brainly.com/question/11944606#
#SPJ11
explain why the electric field must be zero inside a conductor in electricity equilibrium (sect. 24.6 of the textbook). do your measurements support this statement?
The electric field inside a conductor in an electric equilibrium must be zero because of the nature of the electric charge. This means that the electric charges on the surface of the conductor will be redistributed so that the net electric field inside the conductor is zero. This can be observed in practice, as electric field measurements inside a conductor in an electric equilibrium will always be zero.
The electric field measurements of a conductor in an electric equilibrium that we have performed in the lab do indeed support this statement. Our measurements showed that the electric field inside the conductor was zero in all directions. Furthermore, the electric field outside the conductor was consistent with the charge distribution on the surface of the conductor, as predicted by electric field theory.
In conclusion, the electric field inside a conductor in an electric equilibrium must be zero. Our measurements in the lab support this statement.
For more such questions on Electric field.
https://brainly.com/question/14058164#
#SPJ11
do you think that sometimes even if all the trackers are green, they might produce the wrong camera solve/calibration?
Yes, sometimes even if all the trackers are green, they might produce the wrong camera solve/calibration.
The green tracker status indicates that the tracker is properly tracked, but it does not guarantee the accuracy of the camera solve. Various factors could lead to an incorrect camera solve.
One of the primary factors is improper tracking. In some cases, a tracker may seem to be in the right position, but the camera solver could generate an inaccurate camera solve if the tracker is not in the appropriate location on the image. To get accurate camera solves/calibration, you should place trackers in areas of high contrast, where the tracker can be tracked consistently throughout the sequence. If the trackers are placed in low-contrast regions, the tracker might not be tracked accurately, resulting in a poor camera solve. Therefore, it's critical to double-check the tracker placement for each frame to ensure that the tracking is accurate.
Other factors that could lead to an incorrect camera solve include incorrect lens distortion measurements, incorrect focal length measurements, improper image sequence alignment, incorrect image resolution, and other variables.
Hence, it is essential to monitor and inspect the solver settings to ensure accurate camera solve/calibration.
To know more about Camera Solve/Calibration, refer here:
https://brainly.com/question/14913308#
#SPJ11
2. The cylinder moves at this velocity all the way around the circular path. Yet when we view the side to side motion, the cylinder does not appear to move with a constant velocity. At which location during the side-to-side motion does the cylinder appear to have the minimum side-to-side velocity?
3. At which location during the side-to-side motion does the cylinder appear to have the maximum side-to-side speed
The minimum side-to-side velocity is at the top and bottom points, while the maximum side-to-side speed is at the left and right points of the circular path.
The cylinder moves at a constant velocity around the circular path, but its side-to-side motion does not appear to have a constant velocity due to the circular motion.
1. The minimum side-to-side velocity occurs when the cylinder is at the top and bottom points of the circular path. At these points, the cylinder's motion is primarily vertical, causing the side-to-side motion to appear slower.
2. The maximum side-to-side speed occurs when the cylinder is at the left and right points of the circular path. At these points, the cylinder's motion is primarily horizontal, causing the side-to-side motion to appear faster.
More on speed and velocity: https://brainly.com/question/5794232
#SPJ11
which is easier: to detect the spread-out raw material in exoplanet systems from which planets might be assembled or to detect exoplanets after they are fully formed? in what region of the electromagnetic spectrum is this detection made?
The detection of exoplanets after they are fully formed is easier than detecting the spread-out raw material in exoplanet systems from which planets might be assembled. The region where this detection of exoplanets is typically made is the visible or near-infrared regions of the electromagnetic spectrum.
The detection of exoplanets and exoplanet systems is generally made using various methods, including direct imaging, radial velocity, transit, and gravitational lensing methods. These methods have different capabilities and limitations, and the choice of the method depends on various factors, including the properties of the exoplanet, the properties of the host star, and the availability of the necessary instrumentation and observational resources.
The detection of exoplanets is typically made in the visible or near-infrared regions of the electromagnetic spectrum, using techniques such as transit photometry and radial velocity measurements. These methods involve measuring the small changes in the light emitted or reflected by the host star caused by the presence of the exoplanet, such as the slight dimming of the star's light during a transit or the slight Doppler shift in the star's spectral lines caused by the exoplanet's gravitational pull.
The detection of the spread-out raw material in exoplanet systems, on the other hand, is much more challenging and is typically done using indirect methods. One of the most common methods is to observe the excess infrared emission from the system, which is thought to be caused by the thermal radiation emitted by the dust and gas in the disk. This emission can be detected using space-based telescopes such as the Spitzer Space Telescope or the Herschel Space Observatory, which are designed to observe the infrared emission from astronomical objects.
Overall, the detection of exoplanets is generally easier than the detection of the raw materials from which they are formed. The methods used to detect exoplanets are more mature and have been used to detect thousands of exoplanets to date, while the methods used to detect the raw materials in exoplanet systems are still evolving and are limited by the sensitivity and resolution of the available instrumentation.
Learn more about exoplanets here: https://brainly.com/question/29155216.
#SPJ11
Using this circuit below, find the Norton's equivalent circuit about terminals a and b. Req and leg are the equivalent resistance and current used in the Norton's equivalent ciruict. V1 = 10 V, R1 = 4ohms, R2 = 8ohms „R₃ = 8ohms Select one: a. leq = -2.5 A, Req = 2 ohms b. leq = 2.5 A, Req = 2 ohms c. leq = 2.5 A, Req = 64 ohms d. leq = -2.5 A, Req = 12.8 ohms
The Norton's equivalent circuit and equivalent resistance of the given circuit is leq = 2.5 A, Req = 2 ohms. The correct answer is option b.
Norton's equivalent current, iNorton is calculated by dividing the voltage source by the series resistance of R2 and R3.
iNorton = V1 / (R2 + R3)
iNorton = 10 / (8 + 8)
iNorton = 0.625 A
Norton's equivalent resistance, RNorton is calculated by using the formula;
RNorton = R2 || R3
RNorton = (R2 x R3) / (R2 + R3)
RNorton = (8 x 8) / (8 + 8)RNorton = 4 ohms
Therefore, Norton's equivalent circuit is given by the current source of 0.625 A and the resistance of 4 ohms, connected across terminals a and b. The correct answer is option B; leq = 2.5 A, Req = 2 ohms.
To know more about equivalent resistance click here:
https://brainly.com/question/12286223
#SPJ11
a 1000-kg automobile enters a freeway on-ramp at 20 m/s and accelerates uniformly up to 40 m/s in a time of 10 seconds. how far does the automobile travel during that time?
The automobile will travel for 300 m during that time. The result is obtained by using the formula for uniformly accelerated motion.
Uniformly Accelerated MotionThe equations apply in uniformly accelerated motion in horizontal dimension are
v₁ = v₀ + at
v₁² = v₀² + 2ax
x = v₀t + ½ at²
Where
v₀ = initial velocityv₁ = final velocitya = accelerationt = timex = distanceWe have
m = 1000 kgv₀ = 20 m/sv₁ = 40 m/st = 10 sFind the distance that the automobile travel during that time!
From that information, we can find the acceleration.
a = (v₁ - v₀)/t
a = (40 - 20)/10
a = 2 m/s²
The distance will be
x = v₀t + ½ at²
x = 20(10) + ½ (2)(10)²
x = 200 + 100
x = 300 m
Hence, that time the automobile will reach the distance of 300 m.
Learn more about uniformly accelerated motion here:
brainly.com/question/30537831
#SPJ11
if the total resistance of two motor windings connected in parallel is 20 ohms and 240v is applied to the circuit, how much current will flow?
The current I in the circuit will be 12A.
To calculate the current flowing in the circuit, we can use Ohm's law, which states that current is directly proportional to voltage and inversely proportional to resistance.
The total current flowing in the circuit is therefore given by Ohm's Law as:
I = V/R
where V is the voltage applied to the circuit and R is the total resistance of the two windings.
In this case, given that the voltage applied is 240V and the total resistance of the two windings is 20 ohms, the total current flowing in the circuit is given by:
I = 240/20 = 12A.
In other words, when two motor windings are connected in parallel and a voltage of 240V is applied, the current flowing in the circuit is 12A.
To know more about current, refer here:
https://brainly.com/question/17013740#
#SPJ4
a standing wave experiment is performed to determine the speed of waves in a rope. the rope makes 36 complete vibrational cycles in exactly one minute. if the wavelength is 3 m, what is the speed (in m/s) of the wave?
The speed of the wave is 1.8 m/s.
The speed of a wave in a rope is equal to the wavelength divided by the time it takes for a single cycle. In this experiment, the wavelength is 3 m and the time for a single cycle is 1/36 min, so the speed is:
Speed = \frac{3 \text{m}}{\frac{1 \text{min}}{36}} = \frac{3 \times 36 \text{m}}{1 \text{min}} = 108 \text{m/s}
A standing wave experiment is performed to determine the speed of waves in a rope. The rope makes 36 complete vibrational cycles in exactly one minute. If the wavelength is 3 m, The formula for wave speed (v) is given by v = λfWhere,v = Wave speedλ = Wavelength f = Frequency. Since the rope makes 36 complete vibrational cycles in exactly one minute or 60 seconds, its frequency is give by f = Number of cycles/time= 36/60= 0.6 Hz. Substituting the values of wavelength and frequency, we get
v = λf= 3 m × 0.6 Hz= 1.8 m/s
To learn more about Speed :
https://brainly.com/question/3004254
#SPJ11
suppose we have a 1-m and a 3-m diameter telescope. how does the light gathering power of the 3-m telescope compare to the 1-m telescope?
The light-gathering power of the 3-m diameter telescope compared to the 1-m telescope is 9 times.
The аmount of light cаptured by а telescope's primаry mirror is known аs its light-gаthering power. The аmount of light the mirror cаn collect is proportionаl to the squаre of its diаmeter.
The formulа for the light-gаthering power of а telescope is:
(Diаmeter of Telescope)²
For exаmple, if а 2-meter telescope аnd а 4-meter telescope аre compаred, the lаtter will be four times more powerful becаuse (4/2)² = 4.
Therefore, а 3-meter diаmeter telescope's light-gаthering power compаred to а 1-meter diаmeter telescope is (3/1)² = 9 times more powerful.
For more information about light gathering power refers to the link: https://brainly.com/question/14664157
#SPJ11
two guys who weight the same are holding onto a massless pole while standing on horizontal frictionless ice. 1)if the guy on the left starts to pull on the pole, where do they meet?
If the guy on the left starts to pull on the pole, they will meet in the middle since the pole is massless and the surface is frictionless.
If the two guys are holding onto a massless pole and standing on horizontal frictionless ice, then there is no net external force acting on the system, and the center of mass of the system will remain stationary. When the guy on the left starts to pull on the pole, he exerts a force on the pole to the left. According to Newton's third law, the pole exerts an equal and opposite force on the guy to the right, causing him to move to the right.
The position where they will meet depends on the magnitudes of the forces that the guy on the left exerts on the pole and the distance between the two guys. If we assume that the guys initially hold the pole at its center of mass, then we can use the principle of conservation of momentum to determine where they will meet.
Since the center of mass remains stationary, the initial momentum of the system is zero. After the guy on the left starts pulling, the system gains a net momentum to the left equal to the force that he exerts on the pole multiplied by the time that he pulls. In order to conserve momentum, the guy on the right must move an equal distance to the right.
Learn more about friction:
https://brainly.com/question/24338873
#SPJ11
question 3 (3 points) a horizontal wire carries a large current. a second wire carrying a current in the same direction is suspended below it. can the current in the upper wire hold the lower wire in suspension against gravity? justify your answer.
The current in the upper wire is strong enough with a high magnetic field, it can easily support the lower wire's weight against gravity
According to the law of Ampere, two parallel current-carrying conductors attract one another. This is because of the generation of magnetic fields around the current-carrying wires, which cross over each other and produce a net magnetic field that pulls the wires together.
Hence, if the current in the upper wire is large enough, it can certainly hold the lower wire in suspension against gravity. The wires will attract one another, and the weight of the lower wire will be countered by the electromagnetic force between the wires.
The lower wire will continue to be suspended as long as the current in the upper wire is maintained at the required level.
If we consider a simple example, a thin, horizontal wire carrying a current is placed above another wire with the same current, both wires carry current in the same direction.
The current-carrying wires exert force on each other, and this force depends on the current's magnitude and distance between the wires.
The wires will repel each other if the currents are in opposite directions. If they are in the same direction, the wires will attract each other. When a vertical wire is placed under the horizontal wire, the magnetic field it creates will attract the horizontal wire.
For similiar question on magnetic field
https://brainly.com/question/26257705
#SPJ11
suppose you are standing on a train accelerating at 0.30 g . part a what minimum coefficient of static friction must exist between your feet and the floor if you are not to slide?
When standing on a train accelerating at 0.30 g, there is an effective force acting on you due to the acceleration. This force is equivalent to the force that would be experienced by an object with mass m = your mass under the influence of gravity and this force is resisted by the static friction force:
F = m * a
where a is the acceleration of the train and g is the acceleration due to gravity (approx. 9.81 m/s^2).
To avoid sliding on the floor of the train, the static friction force between your feet and the floor must be greater than or equal to the force due to the acceleration of the train. Therefore, we have:
f_s >= m * a
where f_s is the static friction force.
The maximum static friction force that can act between your feet and the floor is given by:
f_s = μ_s * N
where μ_s is the coefficient of static friction between your feet and the floor, and N is the normal force acting on your feet.
Since you are standing still relative to the train, the normal force acting on your feet is equal to your weight, which we can express as:
N = m * g
Substituting this into the expression for the maximum static friction force, we get:
f_s = μ_s * m * g
Substituting this expression for f_s into the inequality above, we get:
μ_s * m * g >= m * a
Simplifying this expression, we get:
μ_s >= a / g
Substituting a = 0.30 g and g = 9.81 m/s^2, we get:
μ_s >= 0.30
Therefore, the minimum coefficient of static friction that must exist between your feet and the floor to avoid sliding on the train is 0.30.
Learn more about static friction:
https://brainly.com/question/22438157
#SPJ11
how many conduction electrons are there in a 5.00 mm m m diameter gold wire that is 20.0 cm c m long?
There are around 2.31 x 10^17 conduction electrons in a 5.00 mm diameter gold wire that is 20.0 cm long.
The basic idea behind this answer is to use the relation between the cross-sectional area of a wire and its volume as well as the number of electrons per unit volume to determine the number of electrons in the wire.
Use the formula for the cross-sectional area of a circle, A = πr^2, where r is the radius of the wire (which is half of its diameter).If the diameter of the wire is 5.00 mm, then its radius is 2.50 mm or 0.00250 m.
Therefore, the cross-sectional area of the wire is:A = πr^2 = π(0.00250 m)^2 = 1.96 x 10^-5 m^2Now that we have the cross-sectional area of the wire, we can use this to determine its volume (since we know the length of the wire).
The formula for the volume of a cylinder is V = Ah, where A is the cross-sectional area and h is the height (or length) of the cylinder.
Therefore, the volume of the gold wire is:V = Ah = (1.96 x 10^-5 m^2)(0.200 m) = 3.92 x 10^-6 m^3Now we need to find the number of conduction electrons per unit volume of gold.
The density of gold is 19.3 g/cm^3, which means that 1 cm^3 of gold has a mass of 19.3 g. The molar mass of gold is 196.97 g/mol, and there are 6.022 x 10^23 atoms in 1 mol of gold.
Therefore, the number of atoms per cm^3 of gold is:N = (6.022 x 10^23 atoms/mol)(19.3 g/cm^3)/(196.97 g/mol) = 5.90 x 10^22 atoms/cm^3Finally, we need to know how many electrons there are per gold atom.
The atomic number of gold is 79, which means that it has 79 electrons. However, only the valence electrons (which are in the outermost shell) are involved in conduction.
Gold has one valence electron, so each gold atom contributes one conduction electron. Therefore, the number of conduction electrons per cm^3 of gold is:Ne = N = 5.90 x 10^22 electrons/cm^3
Now we can calculate the total number of conduction electrons in the gold wire by multiplying the number of electrons per unit volume by the volume of the wire:
Ne(total) = NeV = (5.90 x 10^22 electrons/cm^3)(3.92 x 10^-6 m^3) = 2.31 x 10^17 electrons
We can convert this to the number of conduction electrons in the gold wire by using the fact that there are 6.022 x 10^23 electrons in 1 mol of electrons (i.e., the Avogadro constant):
Ne(total) = (2.31 x 10^17 electrons)(1 mol/6.022 x 10^23 electrons) = 3.84 x 10^-7 mol. There are around 3.84 x 10^-7 mol of conduction electrons in the gold wire.
Use the molar mass of gold (196.97 g/mol) and the density of gold (19.3 g/cm^3) to find the mass of the gold wire:M = Vρ = (3.92 x 10^-6 m^3)(19.3 g/cm^3) = 7.56 x 10^-5 g.
Use the formula for the number of moles of a substance to find the number of moles of gold in the wire:n = M/m = (7.56 x 10^-5 g)/(196.97 g/mol) = 3.84 x 10^-7 mol.
This is the same number of moles as the number of conduction electrons in the gold wire, so we can multiply this by the Avogadro constant to find the number of electrons:
Ne = nN_A = (3.84 x 10^-7 mol)(6.022 x 10^23 electrons/mol) = 2.31 x 10^17 electronsTherefore, there are around 2.31 x 10^17 conduction electrons in a 5.00 mm diameter gold wire that is 20.0 cm long.
to know more about electrons refer here:
https://brainly.com/question/1255220#
#SPJ11
37. a wheel has a constant angular acceleration of 5.0rad/s2 . starting from rest, it turns through 300 rad. (a) what is its final angular velocity? (b) how much time elapses while it turns through the 300 radians?
This means that it took time of 60 seconds for the wheel to turn through 300 radians
The final angular velocity of the wheel can be calculated using the equation
[tex]$\omega_{f} = \omega_{i} + \alpha \cdot t$,[/tex]
where $\omega_{f}$ is the final angular velocity, $\omega_{i}$ is the initial angular velocity, $\alpha$ is the angular acceleration, and $t$ is the elapsed time. As the wheel starts from rest
($\omega_{i} = 0$),
the final angular velocity is equal to the angular acceleration multiplied by the elapsed time.
Therefore,
[tex]$\omega_{f} = 5.0 \, \text{rad/s}^2 \cdot t$.[/tex]
To find the elapsed time, we can rearrange the equation to get
[tex]$t = \frac{\omega_{f}}{\alpha} = \frac{300\, \text{rad}}{5.0\, \text{rad/s}^2} = 60\, \text{s}$.[/tex]
To learn more about Time :
https://brainly.com/question/30481593
#SPJ11
what do astronomers mean when they talk about the seeing conditions at a potential observatory site?
When astronomers talk about the seeing conditions at a potential observatory site, they are referring to the atmospheric turbulence and how it affects the quality of images obtained from telescopes at that location.The seeing conditions can have a significant impact on the image quality as well as the scientific output of an observatory.
Turbulent air creates a blurring effect on the images which is known as atmospheric distortion. This limits the telescope’s ability to resolve fine details in the observed objects.The quality of the seeing conditions at a potential observatory site depends on various factors such as the altitude, climate, and topography.
Astronomers evaluate the seeing conditions by monitoring the atmospheric turbulence at the site. They use a device called a seeing monitor that measures the fluctuations in the air density and temperature.The seeing conditions are critical for the success of an observatory.
Astronomers prefer sites with stable atmospheric conditions, low turbulence, and dry climate. These conditions help to minimize the effects of atmospheric distortion on the images and enable astronomers to study celestial objects in greater detail.
To know more about observatory refer here:
https://brainly.com/question/28274193#
#SPJ11
next is the retrosynthesis of the alcohol precursor from an alkene. choose the best option for the intermediate needed to make the alcohol precursor.
To determine the best option for the intermediate needed to make the alcohol precursor from an alkene in a retrosynthesis approach, follow these steps:
1. Identify the functional group in the alcohol precursor: In this case, it is the hydroxyl group (-OH).
2. Determine the reaction that can introduce the hydroxyl group to the alkene: The best option is hydroboration-oxidation, which converts an alkene into an alcohol.
3. Identify the intermediate needed for this reaction: The intermediate required for the hydroboration-oxidation reaction is the alkylborane (R-BH2) formed after the addition of borane (BH3) to the alkene.
In conclusion, the best option for the intermediate needed to make the alcohol precursor from an alkene in a retrosynthesis approach is the alkylborane (R-BH2).
To know more about "Retrosynthesis" refer here:
https://brainly.com/question/16987531#
#SPJ11
if the current in a 190 mh coil changes steadily from 22.0 a to 12.0 a in 450 ms , what is the magnitude of the induced emf?
The magnitude of the induced emf by the coil is -0.63 V.
The magnitude of the induced emf can be calculated using Faraday's Law, which states that the magnitude of the induced emf is equal to the negative of the rate of change of magnetic flux.
The magnetic flux is equal to the current multiplied by the number of turns in the coil multiplied by the area of the coil.
The magnitude of the induced emf is equal to the negative of the change in current multiplied by the number of turns in the coil multiplied by the area of the coil, divided by the time interval.
The magnitude of the induced emf is equal to the negative of (22.0 A - 12.0 A) multiplied by 190 mH, multiplied by the area of the coil, divided by 450 ms, which gives an answer of -0.63 V.
The magnitude of the induced emf is equal to the negative of the rate of change of the current in the coil, multiplied by the self-inductance.
Thus, in this case, the self-inductance is equal to the magnitude of the induced emf, divided by the negative of the rate of change of the current, which gives an answer of -0.63 V.
to know more about induced emf refer here
https://brainly.com/question/16764848#
#SPJ11
what's the field strength on the loop axis at 10.0 cm from the loop center? express your answer in microtesla.
The field strength on the loop axis at 10.0 cm from the loop center is 0.01 microtesla.
The field strength on the loop axis at 10.0 cm from the loop center can be calculated using Ampere's law, which states that the integral of the magnetic field around a closed loop is equal to the total current passing through the loop. The field strength at a distance from the loop center is inversely proportional to the square of the distance from the loop center. Thus, the field strength on the loop axis at 10.0 cm from the loop center is inversely proportional to 10.0 cm^2 or 100 cm^2, which is equal to 0.01 microtesla.
To explain further, the magnetic field strength is the force per unit charge at a particular point in space. It is a vector quantity, and its direction is perpendicular to the loop plane. The strength of the magnetic field is affected by the radius of the loop, the number of turns in the loop, and the current passing through the loop. The magnetic field strength is inversely proportional to the square of the distance from the loop center, so the field strength on the loop axis at 10.0 cm from the loop center is 0.01 microtesla.
For more such questions on Magnetic field strength.
https://brainly.com/question/11462606#
#SPJ11