The average repeat unit molecular weight for average molecular weight of 229,500 g/mol and a number degree of polymerization of 4,000 is equals to the 57.4 g/mol. So, option(c) is right one.
Polymers are large molecules made up of repeating structural units linked together. The degree of polymerization (DP) is the number of repeating units in the polymer molecule. The average molecular weight is the degree of polymerization (MP) multiplied by the molecular weight of the repeat unit (m) is written as [tex] \bar M_n = (DP)(m)[/tex]
We have a random copolymer produced by polymerization of vinyl chloride and propylene.
Average molecular weight= 229500 g/mol
Number degree of polymerization = 4000
Using the above formula, the average repeat unit molecular weight = 229500 g/mol/ 4000
= 57.37 ~ 57.4 g/mol
Hence, required value is 57.4 g/mol.
For more information about degree of polymerization, visit :
https://brainly.com/question/30751495
#SPJ4
a 10 ml suspension, in water, is made from a bloody stool sample collected from a neonate. the specimen is centrifuged and the resulting pink supernatant transferred in equal volumes to 2 tubes. the first tube serves as a reference while the second tube is alkalinized with 1 ml of 0.25 m sodium hydroxide. the second tube changes to yellow within 2 minutes. this reaction indicates the presence of :
The pink supernatant obtained from the centrifuged bloody stool sample of the neonate was likely to contain bilirubin. Bilirubin is a yellow-orange pigment that is produced from the breakdown of heme in red blood cells.
Normally, bilirubin is metabolized in the liver and excreted in bile. However, in neonates, the liver is not fully developed, and bilirubin may accumulate in the blood, causing jaundice.
The yellow color observed in the second tube, after adding 0.25 M sodium hydroxide, indicates the presence of conjugated bilirubin. Conjugated bilirubin is a water-soluble form of bilirubin that is excreted in bile.
Alkaline conditions (due to the addition of sodium hydroxide) convert unconjugated bilirubin into its water-soluble form, conjugated bilirubin. The rapid change to yellow color in the second tube suggests that the neonate had an excess of conjugated bilirubin, indicating a possible liver disease or other underlying condition that impairs bilirubin metabolism.
In summary, the yellow color change in the second tube indicates the presence of conjugated bilirubin in the bloody stool sample of the neonate, suggesting a possible liver disease or other underlying condition.
To know more about bilirubin, refer here:
https://brainly.com/question/14426528#
#SPJ11
q23.41 - level 3 homeworkunanswereddue apr 12th, 11:30 am which alkylating agent(s) should be used for the acetoacetic ester synthesis of methyl isobutyl ketone, a common solvent?
Alkylating agents are not used in the acetoacetic ester synthesis of methyl isobutyl ketone. The acetoacetic ester synthesis is a type of organic reaction.
The response of an alkyl halide, ethyl acetoacetate, with a strong base, similar as sodium ethoxide, yields a beta- keto ester. The process begins by forming an enolate intermediate, which is latterly alkylated by the alkyl halide. After that, the product is hydrolyzed and decarboxylated to give the needed beta- keto ester.
The alkyl halide employed for alkylation in the acetoacetic ester conflation of methyl isobutyl ketone would be isobutyl iodide, not an alkylating agent. The enolate intermediate of ethyl acetoacetate is alkylated with isobutyl iodide, followed by hydrolysis and decarboxylation to induce the product, methyl isobutyl ketone. It's worth mentioning that alkylating chemicals, similar as nitrogen mustards and alkyl sulfonates, are utilised in cancer treatment as chemotherapeutic agents.
Learn more about acetoacetic ester at
https://brainly.com/question/29819446
#SPJ4
when 1 mole of reacts with to form according to the following equation, 108 kj of energy are evolved. is this reaction endothermic or exothermic?
This is an exothermic reaction because energy is released during the reaction process as 108 kJ of energy are evolved when 1 mole reacts to form product.
When 1 mole reacts to form product according to the given equation, 108 kJ of energy are evolved, which means that energy is being released by the reaction. This release of energy indicates an exothermic reaction as exothermic reaction is a chemical reaction that involves the release of energy.
Learn more about exothermic reaction here:
https://brainly.com/question/13014923
#SPJ11
Based on the fact that energy is being evolved, this reaction is exothermic.
This reaction is exothermic because energy is released (or "evolved") during the reaction. In exothermic reactions, energy is given off as the reactants transform into products, while in endothermic reactions, energy is absorbed from the surroundings. Since 108 kJ of energy is evolved in this case, it confirms that the reaction is exothermic.
To know more about Exothermic Reactions:
https://brainly.com/question/14079389
#SPJ11
Which has more atoms: one mole of helium or one mole of lead?
Answer:
They're equal.
Explanation:
Giving an idea let's use the question:
How big would a box be that holds one mole of helium?This would depend on the temperature and pressure conditions that the helium gas is being stored under.
You see, gases have no fixed volume. They will expand when the temperature increases and/or the applied pressure decreases. On the other hand, the gas will contract when cooled or pressure is applied. So one mole of helium could occupy almost any volume, depending on how much you compress it or how cool you keep it.
However, if your helium gas is stored under standard temperature and pressure conditions (STP)(0 C and 101.3 kPa), then it would fill a box with a volume of 22.4 L. This volume is known as the standard molar volume and is the same for any gas at STP.
I will let you come up with a set of dimensions for a box that could satisfy this volume.
what is the maximum amount of heat in joules that 23 grams of water at 95oc can lose before freezing completely?
23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.
To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.
So, the initial energy of the water is:
E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J
Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The final energy of the water at 0°C is:
E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J
So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:
ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J
Learn more about joules here: brainly.com/question/25982371
#SPJ11
we must perform dilutions of absorbance values above 1.00 since not enough light is getting through the sample as it is heavily concentrated with solutes question 7 options: true false
True. Absorbance values above 1.00 indicate that the sample is heavily concentrated with solutes, which can limit the amount of light that passes through the sample.
Dilution is necessary to reduce the concentration of solutes in the sample and allow more light to pass through, enabling accurate measurement of the absorbance values.
Dilution involves adding a solvent to the sample to decrease its concentration while maintaining the same proportion of solutes. The diluted sample can then be re-analyzed to obtain absorbance values within the linear range of the spectrophotometer.
It is important to note that proper dilution factors must be calculated and applied accurately to avoid errors in the final results. Dilution is a commonly used technique in many scientific fields, including biochemistry, molecular biology, and environmental science.
To learn more about : solutes
https://brainly.com/question/25326161
#SPJ11
addictive substances, for which demand is inelastic, are products for which producers can pass higher costs on to consumers.
The statement is correct. Producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.
Inelastic demand refers to a situation where changes in price have little effect on the quantity demanded of a product. Addictive substances, such as tobacco or drugs, often have inelastic demand because users are willing to pay high prices for the product regardless of changes in price.
Producers of addictive substances can take advantage of this inelastic demand by increasing prices without seeing a significant decrease in demand. This means that they can pass on any higher costs, such as increased taxes or production costs, to the consumers, who are likely to continue purchasing the product even at a higher price.
This is often seen in the tobacco industry, where governments may increase taxes on cigarettes as a way to discourage smoking, but the tobacco companies can simply pass on the higher costs to consumers who continue to buy the product.
Therefore, it can be concluded that producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.
To learn more about addictive substances, here
https://brainly.com/question/15085682
#SPJ4
as ice melts, the water molecules group of answer choices stay ordered the same as in ice. go from a less-ordered phase to a more-ordered phase. go from a well-ordered phase to a less-ordered phase. none of the above previousnext
As ice melts, the water molecules group go from a well-ordered phase to a less-ordered phase. The correct answer is "go from a well-ordered phase to a less-ordered phase.
As ice melts, the water molecules go from a well-ordered phase to a less-ordered phase. In ice, the water molecules are arranged in a specific pattern, which gives it a solid, crystalline structure.
However, as the temperature increases and the ice begins to melt, the water molecules gain energy and start to move around more freely, breaking the rigid pattern.
This results in a less-ordered phase where the water molecules are no longer held in a fixed position. " None of the other answer choices accurately describe what happens to the water molecules as ice melts.
To learn more about : well-ordered
https://brainly.com/question/2990207
#SPJ11
What is the volume of a 1.5 M solution containing 2 moles of solutes?
the number of moles of solvent divided by the number of liters of solution.
In chemistry, why are moles significant?The mole idea enables us to weigh macroscopically small quantities of matter and count molecules and atoms because they are so minuscule. To calculate the stoichiometry of reactions, a standard is established. A description of the characteristics of gases is given in paragraph three.
Is 1M a mole?A 1 molar (1M) liquid is defined as a substance that has been dissolved in 1 mole of liquid (i.e., 1mol/L), while a 0.5 molecule (0.5M) solution is defined as a substance that has been dissolved in 2 mol/L of liquid.
To know more about moles visit:
https://brainly.com/question/26416088
#SPJ1
Why don't populations continue to grow and grow?
What are the PEL levels for Sb51
PEL levels for a particular substance, such as Antimony, may vary depending on the country, jurisdiction, and specific industry or work environment.
What is PEL?"PEL" stands for "Permissible Exposure Limit," which is a term used in occupational health and safety regulations to denote the maximum amount or concentration of a hazardous substance that a worker may be exposed to over a specified time period without adverse health effects.
Therefore, it is important to refer to the relevant occupational health and safety regulations or guidelines in your specific area or industry for accurate and up-to-date information on the PEL levels for Antimony or any other hazardous substance.
These regulations are typically established by government agencies, such as the Occupational Safety and Health Administration (OSHA) in the United States or the Health and Safety Executive (HSE) in the United Kingdom.
Learn more about PEL levels here: https://brainly.com/question/5428869
#SPJ1
Can someone please help !! I just need someone to help me figure out how to solve it and solve the picture as an example
The molar concentration of Al(OH)₃ in the solution is 1.61 M.
we need to calculate the number of moles of Al(OH)3 in the solution:
Number of moles of Al(OH)₃ = mass of Al(OH)3 / molar mass of Al(OH)3
Molar mass of Al(OH)₃ = (1 x atomic mass of Al) + (3 x atomic mass of O) + (3 x atomic mass of H)
Molar mass of Al(OH)₃ = (1 x 26.98 g/mol) + (3 x 16.00 g/mol) + (3 x 1.01 g/mol) = 78.00 g/mol
Number of moles of Al(OH)₃ = 62.7 g / 78.00 g/mol = 0.804 moles
Next, we need to calculate the volume of the solution in liters:
Volume of solution = 500.0 mL = 500.0 mL x (1 L/1000 mL) = 0.500 L
Finally, we can calculate the molar concentration of Al(OH)₃
Molarity = moles of solute/volume of solution in liters
Molarity = 0.804 moles / 0.500 L = 1.61 M
Therefore, the molar concentration of Al(OH)₃ in the solution is 1.61 M.
learn more about Molar Mass here
https://brainly.com/question/837939
#SPJ1
mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.
During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.
At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.
To know more about Mercury Variations in surface temperature:
https://brainly.com/question/16117265
#SPJ11
Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.
Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.
The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.
Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.
Learn more about atmosphere here:
https://brainly.com/question/11192430
#SPJ11
karl-anthony is trying to plate gold onto his silver ring. he constructs an electrolytic cell using his ring as one of the electrodes. he runs this cell for 94.7 minutes at 220.8 ma. how many moles of electrons were transferred in this process?
0.11 moles of electrons were transferred during the electroplating process.
The number of moles of electrons transferred can be calculated using Faraday's constant, which represents the amount of charge carried by one mole of electrons.
Faraday's constant is approximately 96,485 C/mol. Using this constant and the given information, the number of moles of electrons transferred can be calculated as:
moles of electrons = (220.8 mA * 94.7 min * 60 s/min) / (1000 mA/A * 96,485 C/mol)moles of electrons = 0.11 molTherefore, 0.11 moles of electrons were transferred during the electroplating process.
To learn more about Faraday's constant, here
https://brainly.com/question/29290837
#SPJ4
after being exposed to an organophosphate insecticide, a landscaping worker presents to the emergency department. decontamination should begin with which step?
After being exposed to organophosphate insecticide, Decontamination should begin with : C. Place the patient in a well-ventilated, isolated area.
What should be done after being exposed to organophosphate insecticide:
For the safety of other patients and staff members, place the patient in a well-ventilated and isolated area for decontamination. After donning personal protective equipment, gloves and goggles, carefully remove patient's clothing. Then brush off the insecticide, if it was of a dry type.
Decontaminate patient with copious amount of water. Do not apply any neutralizing agent because it may cause exothermic reaction that produces heat.
To know more about Organophosphate insecticide:
brainly.com/question/28547821
#SPJ4
Complete question:
After being exposed to an organophosphate insecticide, a landscaping worker presents to the emergency department. Decontamination should begin with which step?
A. Brush the insecticide off the patient.
B. Remove the patient's clothing.
C. Place the patient is a well-ventilated, isolated area.
D. Apply a neutralizing agent.
physicists kelvin and helmholtz in the last century proposed that the source of the sun's energy could be:
Answer:
produced continually by the impact of meteors falling onto its surface.
Explanation:
f the barometer read 765.2 mmhg when the measurement in in the figure below took place, what is the pressure of the gas in the flask in kilopascals?
The pressure of the gas in the flask in kilopascals is given by the term 100.3 kPa, option E.
The pressure of any gas is a crucial characteristic. In contrast to qualities like viscosity and compressibility, we have some experience with gas pressure. Every day, the TV meteorologist reports the value of the atmosphere's barometric pressure.
We have included numerous slides on gas pressure in the Beginner's Guide since comprehending what pressure is and how it works is so essential to understanding aerodynamics. It is possible to investigate how static air pressure varies with altitude using an interactive atmosphere simulator. You can see how the pressure changes around a lifting wing using the FoilSim software.
height difference, h, indicates pressure of gas relative to atmospheric pressure.
h= 13mm
barometric pressure =765.2mmHg (atmosphere)
-from the picture, we can see that atmospheric pressure is greater than the gas pressure. so we minus
765.2mm - 13mm= 752.2mmHg
752.2mmHg * (101.3kPa / 760mmHg) = 100.3kPa.
Learn more about Pressure of gas:
https://brainly.com/question/30003139
#SPJ4
Complete question:
If the barometer read 765.2 mmHg when the measurement in in the Figure below took place, what is the pressure of the gas in the flask in kilopascals?
A. 7.55 kPa
B. 102.4 kPa
C. 1.007 kPa
D. 752.2 kPa
E. 100.3 kPa
C3H8+O2=CO2+H2O
In this reaction, if you had 5g of C3H8, how many grams of CO2 were produced?
Answer:
14.9 g of co2 would be produced.
Explanation:
First, let's balance the equation:
C3H8 + 5O2 → 3CO2 + 4H2O
Now, we can use stoichiometry to determine the amount of CO2 produced. We know from the balanced equation that for every 1 mole of C3H8, 3 moles of CO2 are produced. We can use the molar mass of C3H8 (44.1 g/mol) to convert the given 5 g to moles:
5 g C3H8 / 44.1 g/mol = 0.113 moles C3H8
Using the mole ratio from the balanced equation, we can determine how many moles of CO2 are produced:
0.113 moles C3H8 x (3 moles CO2 / 1 mole C3H8) = 0.339 moles CO2
Finally, using the molar mass of CO2 (44.0 g/mol), we can convert moles of CO2 to grams:
0.339 moles CO2 x 44.0 g/mol = 14.9 g CO2
Therefore, if you had 5g of C3H8, 14.9 g of CO2 would be produced.
a normal penny has a mass of about 2.5g. if we assume the penny to be pure copper (which means the penny is very old since newer pennies are a mixture of copper and zinc), how many atoms of copper do 9 pennies contain?
9 pennies contain approximately [tex]2.13 x 10^23[/tex] atoms of copper.
To solve this problem, we need to use the following steps:
Determine the molar mass of copper.
Convert the mass of 9 pennies from grams to moles.
Use Avogadro's number to calculate the number of atoms of copper.
Step 1: The molar mass of copper (Cu) is approximately 63.55 g/mol.
Step 2: The mass of 9 pennies is:
9 pennies x 2.5 g/penny = 22.5 g
Converting this mass to moles, we get:
22.5 g / 63.55 g/mol = 0.354 moles
Step 3: Using Avogadro's number ([tex]6.022 x 10^23 atoms/mol)[/tex], we can calculate the number of atoms of copper:
Therefore, 9 pennies contain approximately[tex]2.13 x 10^23 a[/tex]toms of copper.
Learn more about molar mass
https://brainly.com/question/22997914
#SPJ4
when 0.0507 moles of iron(iii) chloride are dissolved in enough water to make 480 milliliters of solution, what is the molar concentration of chloride ions? answer in units of mol/l.
The molar concentration of chloride ions in the solution is 0.3169 mol/L
To find the molar concentration of chloride ions in the solution, we need to consider the mole-to-ion ratio of iron(III) chloride (FeCl₃) and then use the volume of the solution.
1 mole of FeCl₃ dissociates into 3 moles of chloride ions (Cl⁻) in solution. So, for 0.0507 moles of FeCl₃, the number of moles of Cl⁻ ions will be:
0.0507 moles FeCl₃ × (3 moles Cl⁻ / 1 mole FeCl₃) = 0.1521 moles Cl⁻
Now, we have 480 milliliters of solution, which is equivalent to 0.480 liters. To find the molar concentration of chloride ions, divide the moles of Cl⁻ by the volume of the solution in liters:
0.1521 moles Cl⁻ / 0.480 L = 0.3169 mol/L
So, the molar concentration of chloride ions in the solution is 0.3169 mol/L.
Know more about molar concentration here:
https://brainly.com/question/26255204
#SPJ11
electrons can only gain energy by leaving the atom (creating an ion). electrons move between discrete energy levels, or escape the atom if given enough energy. electrons can have any energy below the ionization energy within the atom, or escape if given enough energy. electrons can have any energy within the atom, and cannot be given enough energy to cause them to escape the atom. electrons move between discrete energy levels within the atom, and cannot accept an amount of energy that causes them to escape the atom. 5 points saved question 7 the spectrum from an incandescent (with a filament) light bulb is a(n) continuous spectrum. emission line spectrum. absorption line spectrum.
The spectrum from an incandescent light bulb with a filament is a continuous spectrum. This means that the light emitted contains all colors of the visible spectrum, appearing as a smooth, uninterrupted rainbow
Electrons in an atom can only gain energy by leaving the atom and creating an ion. They can move between discrete energy levels or escape the atom if given enough energy. Electrons can have any energy below the ionization energy within the atom or escape if given enough energy.
However, electrons can have any energy within the atom and cannot be given enough energy to cause them to escape the atom. They move between discrete energy levels within the atom and cannot accept an amount of energy that causes them to escape the atom.
In contrast, an emission line spectrum appears as a series of bright lines against a dark background, while an absorption line spectrum appears as a series of dark lines against a bright background.
The type of spectrum emitted depends on the source of the light and the composition of the material emitting the light.
To learn more about : spectrum
https://brainly.com/question/2187993
#SPJ11
a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it.calculate the molarity and molality of the student's solution. round both of your answers to significant digits.molaritymolality
Molarity of the solution is 0.087 M, and the molality of the solution is 0.097 m.
To calculate the molarity, first, we need to convert the given mass of resveratrol to moles using its molar mass. The molar mass of resveratrol is (14 x 12.01 g/mol) + (12 x 1.01 g/mol) + (10 x 16.00 g/mol) = 228.25 g/mol. Therefore, the number of moles of resveratrol is 19 g / 228.25 g/mol = 0.0832 mol. Then we divide the moles of solute by the volume of the solution in liters (450 mL = 0.45 L) to get the molarity: 0.0832 mol / 0.45 L = 0.087 M.
To calculate the molality, we need to use the mass of the solvent, which is equal to the mass of the solution minus the mass of the solute. The mass of the solution is 19 g + (0.81 g/mL x 450 mL) = 382.5 g. Therefore, the mass of the solvent is 382.5 g - 19 g = 363.5 g. We convert the mass of the solvent to moles using its molar mass, which is the same as for the solvent.
The molar mass of the solvent is (12 x 1.01 g/mol) + (16 x 16.00 g/mol) = 80.08 g/mol. Therefore, the number of moles of the solvent is 363.5 g / 80.08 g/mol = 4.54 mol. Finally, we divide the moles of solute by the mass of the solvent in kilograms (363.5 g = 0.3635 kg) to get the molality: 0.0832 mol / 0.3635 kg = 0.097 m.
To learn more about molarity and molality, here
https://brainly.com/question/30909953
#SPJ4
The complete question is:
A student dissolves 19. g of resveratrol (C14H1,0) in 450. mL of a solvent with a density of 0.81 g/ml. The student notices that the volume of the solvent Calculate the molarity and molality of the student's solution. Be sure each of your answer entries has the correct number of significant digits. does not change when the resveratrol dissolves in it.
molarity _____
molality _____
find the location (in units of a0) of the radial node for the 2s orbital in the he ion and li2 ion. how does the location of the radial node change as the nuclear charge increases?
The radial node in an atomic orbital refers to the point where the probability of finding an electron is zero. For the 2s orbital in the He+ ion, the location of the radial node can be calculated using the radial distribution function.
This function is dependent on the distance of the electron from the nucleus and the nuclear charge. For the He+ ion, the location of the radial node is approximately 1.69a0.
Similarly, for the Li2+ ion, the location of the radial node for the 2s orbital can also be calculated using the radial distribution function. In this case, the location of the radial node is approximately 2.11a0.
As the nuclear charge increases, the location of the radial node moves closer to the nucleus. This is because the increased nuclear charge exerts a stronger pull on the electrons, causing them to spend more time closer to the nucleus. This also means that the radial distribution function is more tightly bound to the nucleus, resulting in a smaller radius for the node.
know more about atomic orbital here
https://brainly.com/question/28240666#
#SPJ11
What volume is equivalent to 0. 0015 m3?
The volume is the equivalent to the 0.0015 m³ is the 1.5 × 10³ cm³.
The volume of the substance which can be regarded as the quantity of the specific substance as :
The Volume = 0.0015 m³
The conversion of the m to the cm is as :
1 m³ = 1000000 cm³
The conversion of the m to the cm is as :
1 m³ = 10⁶ cm³
The conversion of the 0.0015 m³ to the cm³ is as :
0.0015 m³ = 0.0015 m³ × ( 1000000 cm³ / 1 m³ )
0.0015 m³ = 1.5 × 10³ cm³.
The conversion of the 0.0015 m³ (meter cubic ) to the cm³ ( cubic centimeter ) is the 1.5 × 10³ cm³.
To learn more about volume here
https://brainly.com/question/3553891
#SPJ4
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature __________ and the sample becomes ___________.
Responses
A expand, largerexpand, larger
B decrease, soliddecrease, solid
C stays the same, smallerstays the same, smaller
D increase, warm
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature increase and the sample becomes warm
What can we infer about the impact of temperature from the kinetic theory of molecules?The average kinetic energy of the molecules will rise as the temperature rises, according to the kinetic molecular theory. The edge of the container will probably be more frequently struck by the particles as they travel more quickly.
The average molecular velocity of a gas increases as its temperature rises; for example, doubling the temperature will result in a four-fold increase in molecular velocity. More momentum and kinetic energy will be transferred to the container's walls in collisions with them.
learn more about kinetic molecular theory
https://brainly.com/question/134712
#SPJ1
how many atmospheres of pressure would there be if you started at 5.75 atm and changed the volume from 5 l to 1 l ?
The pressure would be 28.75 atm if the volume is changed from 5 L to 1 L, starting from an initial pressure of 5.75 atm.
To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:
P1V1/T1 = P2V2/T2
where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature. Since the temperature is constant in this problem, we can simplify the equation to:
P1V1 = P2V2
Substituting the given values, we get:
5.75 atm × 5 L = P2 × 1 L
Solving for P2, we get:
P2 = (5.75 atm × 5 L) / 1 L = 28.75 atm.
For such more questions on Pressure:
https://brainly.com/question/24719118
#SPJ11
How many moles of caffeine, c8h10o2n4, are contained in a 100. Mg sample of caffeine? group of answer choices 0. 0085 0. 019 0. 51 0. 0028 0. 52
The number of moles of caffeine is 0.00052 mol
To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:
moles = mass / molar massThe molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:
moles = 0.1 g / 194.19 g/molmoles = 0.00052 molThe mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.
To learn more about moles, here
https://brainly.com/question/26416088
#SPJ4
Darlene is a dancer with ankle pain and a considerable amount of swelling. She
MOST LIKELY has what muscle disorder?
PLEASE HELPPPPPPPPPP!!!
The number of moles of the gas is about 1.37 moles.
What is the ideal gas equation?The ideal gas equation relates the pressure, volume, temperature, and number of moles of an ideal gas in a closed system. The gas constant (R) is a proportionality constant that relates these four variables.
It is important to note that the ideal gas equation is only applicable to ideal gases, which are hypothetical gases that obey certain assumptions such as having no intermolecular forces and occupying no volume. Real gases deviate from these ideal behaviors under certain conditions, and thus the ideal gas equation may not accurately describe their behavior.
Knowing that;
PV = nRT
n = PV/RT
n = 1.35 * 25/0.082 * 300
n = 33.75/24.6
n = 1.37 moles
Learn more about ideal gas equation:https://brainly.com/question/28837405
#SPJ1
A 2.06 g solid sample of an unknown monoprotic acid was dissolved in distilled
water to produce a 35.0 mL solution at 25°C. This solution was then titrated with
0.300 M NaOH. The equivalence point was reached when 48.73 mL of 0.300 M
NaOH were delivered.
a. Find the number of moles of acid in the solid sample.
b. Find the molar mass of the unknown acid.
the molar mass of the unknown acid is approximately 141.1 g/mol.
a. To find the number of moles of acid in the solid sample, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the equation:
moles NaOH = M NaOH x V NaO
where M NaOH is the molarity of the NaOH solution, and V NaOH is the volume of NaOH solution used at the equivalence point.
Substituting the given values, we get
moles NaOH = 0.300 mol/L x 0.04873 L = 0.014619 mol
Since NaOH and the unknown acid react in a 1:1 mole ratio, the number of moles of acid in the sample is also 0.014619 mol.
b. To find the molar mass of the unknown acid, we can use the equation
molar mass = mass of sample / number of moles of acid
Substituting the given values, we get:
molar mass = 2.06 g / 0.014619 mol = 141.1 g/mol
Learn more about molar here:
https://brainly.com/question/8732513
#SPJ11
The number of moles in the acid is 0.014619 moles and the molar mass of the unknown monoprotic acid is 140.92 g/mol.
How to calculate the number the moles in acid?
To find the number of moles of acid in the solid sample, first determine the moles of NaOH used in the titration. You can do this using the formula:
moles = volume (L) × concentration (M)
moles of NaOH = 48.73 mL × (1 L / 1000 mL) × 0.300 M = 0.014619 moles
Since it's a monoprotic acid, the moles of the acid are equal to the moles of NaOH at the equivalence point:
moles of acid = 0.014619 moles
b. To find the molar mass of the unknown acid, use the formula:
molar mass = mass of the sample (g) / moles of the acid
molar mass = 2.06 g / 0.014619 moles = 140.92 g/mol
So, the molar mass of the unknown monoprotic acid is approximately 140.92 g/mol.
To know more about Molar Mass:
https://brainly.com/question/29509963
#SPJ11