A round tube weighs 30 lbs. If the tube is stood on end it pushes down on the floor with a pressure of
2 lbs/in?. How many square inches is the end of the tube?

Answers

Answer 1

Answer:

15in2

Explanation:

The diagram shows part of a radio antenna.The plastic tube protects the radio antenna from bad weather.Dust particles carried by the wind rub against the plastic tube.After some time, the dust particles cause the tube to become positively charged.State the property of plastic that allows it to become electrostatically charged.

Have a good day!! :>


Related Questions

A small car with mass of 0.800 kg travels at a constant speed
on the inside of a track that is a vertical circle with radius 5.00
m. If the normal force exerted by the track on the car when it
is at the bottom of the track is 25 N,
a) What is the normal force on the car when it is at the (i)
top, (ii) rightmost and (iii) leftmost point of the track?
b) What is the speed of the car as it travels around the
vertical circle?

Answers

Answer:

The equation of equilibrium at the top of the vertical circle is:

\Sigma F = - N - m\cdot g = - m \cdot \frac{v^{2}}{R}

The speed experimented by the car is:

\frac{N}{m}+g=\frac{v^{2}}{R}

v = \sqrt{R\cdot (\frac{N}{m}+g) }

v = \sqrt{(5\,m)\cdot (\frac{6\,N}{0.8\,kg} +9.807\,\frac{kg}{m^{2}} )}

v\approx 9.302\,\frac{m}{s}

The equation of equilibrium at the bottom of the vertical circle is:

\Sigma F = N - m\cdot g = m \cdot \frac{v^{2}}{R}

The normal force on the car when it is at the bottom of the track is:

N=m\cdot (\frac{v^{2}}{R}+g )

N = (0.8\,kg)\cdot \left(\frac{(9.302\,\frac{m}{s} )^{2}}{5\,m}+ 9.807\,\frac{m}{s^{2}} \right)

N=21.690\,N

Which has a greater energy, long wavelength red light or short wavelength uv light?.

Answers

Long wavelength red light

While playing basketball in PE class, Logan lost his balance after making a lay-up and colliding with another student standing behind the basket. His 74-kg body decelerated from 7.6 m/s to 0 m/s, causing the 81-kg student to accelerate from 0 m/s. What is the final velocity of the other student?
PLEASE HELP

Answers

The final velocity of the other student after the elastic collision with Logan is 6.94 m/s.

Conservation of linear momentum

The final velocity of the other student will be determined by applying the principle of conservation of linear momentum for elastic collision.

let u represent  initial velocitylet v represent final velocity

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Substitute the given parameters and solve for final velocity of the other stsudent.

74(7.6) + 81(0) = 74(0) + 81(v₂)

562.4 = 81v₂

v₂ = 562.4/81

v₂ = 6.94 m/s

Thus, the final velocity of the other student after the elastic collision with Logan is 6.94 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

A truck with a mass of 4285 kg is moving at 9. 35 m/s. it crashes into the rear end of a larger truck with a mass of 5495 kg moving at 6. 35 m/s in the same direction. a. what is the final velocity if the trucks lock together? b. how much does the kinetic energy decrease in the collision?

Answers

(a) The final velocity if the trucks lock together after the collision is 7.66 m/s.

(b) The decrease in the kinetic energy after the collision is 11,165.1 J.

Conservation of linear momentum

The final velocity of the two truck system after the collision is determined by applying the principle of conservation of linear momentum as shown below;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

4285(9.35) + 5495(6.35) = v(4285 + 5495)

74,958 = 9,780v

v = 74,958/9780

v = 7.66 m/s

Initial kinetic energy of the trucks

K.E = ¹/₂mv²

K.Ei = ¹/₂(4285)(9.35)² + ¹/₂(5495)(6.35)²

K.Ei = 298,088.78 J

Final kinetic energy of the trucks

K.Ef = ¹/₂(m₁ + m₂)v²

K.Ef = ¹/₂(4285  + 5495)(7.66)²

K.Ef = 286,923.68 J

Change in kinetic energy

ΔK.E = K.Ef - K.Ei

ΔK.E = 286,923.68 J - 298,088.78 J

ΔK.E = - 11,165.1 J

Learn more about linear momentum here: https://brainly.com/question/7538238

how many joules are there in 200kj

Answers

Answer:

200,000 joules <3

Explanation:
just accept it

Answer:

[tex]2.00 * 10^5J[/tex]

Explanation:

Make use of your conversion factors:

[tex]200KJ * \frac{1000J}{1kJ} = 200,000J = 2.00* 10 ^5J[/tex]

Or alternatively make use of your scientific notation. [tex]kilo = 10^3[/tex]

Therefore [tex]200kJ = 200*10^3J=2.0*10^2*10^3J = 2.0*10^5J[/tex]

best answer gets brainliest

Answers

Answer:

a because they are bigger and have more mass wich means that they will fall faster because there is more weight going downward...

Explanation:

Beluga

Answer:

Explanation:

It depends on whether this is a "trick" question.

The law of universal gravitation says that the attractive force between two objects depends directly on their masses and inversely to the square of distance in between them.

As the objects in A are bigger than B, they MAY have higher masses. So the force is larger in A.

But no information is given about object mass or density. The distance between objects in B is shorter. So if the objects in B have the same masses those in A, then the force is larger in B.

In general, which of the following is not a critical skill for participating in a sport? a. agility and balance b. endurance and muscle control c. hand-eye coordination and acuity d. none of the above please select the best answer from the choices provided. a b c d

Answers

Option D is not a critical skill for participating in a sport.

What are sports?

Sport refers to any competitive physical activity or game[1] that intends to utilize, maintain, or enhance physical ability and skills while also giving enjoyment to players and, in certain situations, entertainment to spectators.

Agility and balance are crucial in sports such as soccer, especially when players dribble the ball at rapid speeds.

Endurance and muscular control are critical in sports such as gymnastics and boxing.

Hand-eye coordination and acuity are essential in sports like golf.

Hence Option D is not a critical skill for participating in a sport.

To learn more about the sports refer to the link;

https://brainly.com/question/4252951

Answer:

D

Explanation

dont use me for points please i need help, (circuits for physics)

Answers

Answer:

B, A, A, B

Explanation:

Just trust me on this one.

What are Two methods of producing A.C Electricity ?

Answers

Answer:

hydropower and nucear energy

Explanation:

Examples of these include hydropower, fossil fuel-based power, nuclear energy, and solar thermal power plants, among others. Almost all major power plants generate alternating current, as do diesel generators

Why do you only see one side of the moon? Lesson 3. 05 Question 12 options:

A:The moon only has one side

B:The rotational period is greater than to the period of revolution for the moon

C: The rotational period is equal to the period of revolution for the moon

D:The rotational period is less than the period of revolution for the moon

Answers

Answer:

The Moon orbits Earth once every 27.3 days and spins on its axis once every 27.3 days. This means that although the Moon is rotating, it always keeps one face toward us. Known as “synchronous rotation,” this is why we only ever see the Moon's nearside from Earth.

I hope this helps you out

What is current of 12 ohm? help me pleasee
1. 0.25 A
2. 0.5 A
3. 1 A
4. 1.5 A
5. 2 A​

Answers

Answer:

the current of 12 ohm is 2A

If a FM radio station broadcasts at 80. 3 MHz (megahertz), what is its wavelength in m (speed of light 3. 0 x 108 m/s)

Answers

Answer:

Wavelength = 3.74 m

Explanation:

In order to find wavelength in "metres", we must first convert megahertz to hertz.

1 MHz = 1 × 10⁶ Hz

80.3 Mhz = x

x = 80.3 × 1 × 10⁶ = 8.03 × 10⁷ Hz

The formula between wave speed, frequency and wavelength is:

v = fλ  [where v is wave speed, f is frequency and λ is wavelength]

Reorganise the equation and make λ the subject.

λ = v ÷ f

λ = (3 × 10⁸) ÷ (8.03 × 10⁷)

λ = 3.74 m [rounded to 3 significant figures]

An object is 4 cm in front of a converging lens with a focal length of 12 cm

Answers

Answer:

what is your question

Explanation:

I dont see where you are asking a question be specific lol

: )

Create your own simple metaphor illustrating how demand and supply work together to create equilibrium. Label the following on your metaphor: quantity demanded, quantity supplied, equilibrium point

Answers

''When the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.''

How equilibrium occur?

The equilibrium price and equilibrium quantity occur where the supply and demand curves cross with each other. The equilibrium occurs when the quantity demanded is equal to the quantity supplied.

So we can conclude that  when the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.

Learn more about equilibrium here: https://brainly.com/question/517289

Equilibrium is the condition when the supply of any goods meets the demands completely. The point at which the graph intersects is the equilibrium price.

What is Equilibrium?

Equilibrium is the condition when the supply of any goods meets the demands completely. Therefore, no extra goods are left.

Equilibrium is the condition when the supply and the demand line cross each other on a price and quantity graph as shown below. The point at which the graph intersects is the equilibrium price.

Learn more about Equilibrium Price:

https://brainly.com/question/12894603

#SPJ4

Identify the aspects of the pictured graph that are missing or contain errors.

Answers

Answer:

ooops ignore this it wont let me leave this screen it does this weirdly s

Explanation:

What is average acceleration? How does acceleration occur?

Answers


Average acceleration is the change in velocity with time.
Acceleration takes place when velocity changes with time. Velocity being a vector quantity may change in magnitude or direction any of the change results to acceleration

The pace at which a body's velocity varies is represented by average acceleration, which is a vector quantity.

What is average acceleration?

The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.

The formula for acceleration is;

[tex]\rm a = \frac{v-u}{t}[/tex]

u is the initial speed

v is the final speed

t is the time interval

a is the acceleration of ball

To learn more about average acceleration refer to the link;

https://brainly.com/question/17352997

#SPJ4

How much force would you need to cause a 20-kilogram object to accelerate in a straight line to 20 m/s2?

Answers

Answer:

400N

Explanation:

Newton's second law of motion

F = ma

20 x 20 = F

F = 400

The three fundamental colors of visible light are red, green and blue. Why does a yellow T-shirt appear yellow to you

Answers

This one is leisure for people with common sense. Yellow is an assortment of two of the rudimentary colors, red and green. Yellow appears yellow because red light is being imaged in our eyes, so that's one thing. Green reflections are capable of being enthralled by the shirt; hopefully, this should be meticulous adequate for you to have a basic understanding of this "phenomenon". Cheers!

A yellow T-shirt appear yellow to human eye because it reflects both red and green lights and our eye detects it as a combination of two fundamental colors (red and green), which is yellow.

What is color?

Color is a perception. Our eyes sense something (the sky, for instance), and information is transferred from our eyes to our brains informing us that it is a particular color (blue). Different combinations of wavelengths of light are reflected by objects. When our brains detect certain wavelength combinations, they transform them into the phenomena known as color.

There has three fundamental color: red, blue and green. Red and green lights are combined to create yellow light. If a shirt reflects both red and green light, it appears yellow to human eyes. These two fundamental colors of light must be present in the incident light for red and green light to reflect yellow light to human mind.

Learn more about color here:

https://brainly.com/question/13552152

#SPJ5

What kind of model is this?
A. Experimental model
O B. Mathematical model
O C. Computer model
o
D. Physical model

Answers

Answer:

I think it's Experimental

Explanation:

it has atoms on it.

Answer:

D

Explanation:

It is a physical model.

Calculate the range of wavelengths that are received by the radio in a car. Suppose that the range of frequencies of FM radio is 88.0 MHz to 108 MHz.

Answers

The range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.

To find the range of wavelengths, we use the equation for the speed of a wave

Speed of a wave

The speed of a wave v = fλ where

f = frequency and λ = wavelengthWhat is Wavelength?

This is the distance a wave travels in one cycle of the wave.

Making λ subject of the formula, we have

λ = v/f

Given that the range of frequencies of FM radio is 88.0 MHz to 108 MHz and

v = speed of electromagnetic wave = 3 × 10⁸ m/s, f' = lowest frequency = 88.0 MHz = 88.0 × 10⁶ Hz and f" = highest frequency = 108 MHz = 108 × 10⁶ HzThe longest wavelength, λ'

λ' = v/f'

= 3 × 10⁸ m/s ÷ 88.0 × 10⁶ Hz

= 0.0341 × 10² m

= 3.41 m

The shortest wavelength, λ"

λ" = v/f"

= 3 × 10⁸ m/s ÷ 108 × 10⁶ Hz

= 0.0278 × 10² m

= 2.78 m

So, the range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.

Learn more about wavelength here:

https://brainly.com/question/26637292

1. manganese dioxide is used in dey cell . ( Give reason)
2. Fuses are used in a circuit. ( Give reason )​

Answers

Answer:

1.In dry cells, manganese dioxide acts as a ‘depolariser'.

In the depolarization process, the depolariser is used to remove hydrogen and doesn't allow the voltage to get reduced due to polarisation of the cell . Manganese oxide was used as a depolariser in Leclanché cell .

In zinc-carbon dry cell, the manganese dioxide takes in electrons as it is converted to Manganese III oxide (Mn2O3)

2.The fuse breaks the circuit if a fault in an appliance causes too much current flow. This protects the wiring and the appliance if something goes wrong. The fuse contains a piece of wire that melts easily. If the current going through the fuse is too great, the wire heats up until it melts and breaks the circuit.

What happens when light waves strike a mirror? question 5 options: most of the light waves are refracted. most of the light waves are absorbed. most of the light waves are scattered. most of the light waves are reflected.

Answers

Answer: "Most of the light waves are reflected", might be the correct answer.

Explanation: it might be the correct answer because the light waves spread out from the source in all directions, and upon striking a mirror, are reflected at an angle determined by the angle at which the light arrives. The reflection process inverts each wave back-to-front, which is why a reverse image is observed.

Answer:

most light waves are reflected

explanation:

when light hits a mirror it bounces back at the same angle it hit this is called reflection refraction on the other hand Refraction is the bending of light

Image result for what is refraction of light

Refraction is the bending of light


In outer space, a piece of rock continues moving at the same velocity for
thousands of years. What makes this possible?

Answers

The absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.

Absence of external force on the outer space

The outer space is almost an absolute vacuum, because it's nearly empty. There is no matter such as air in the outer space that will provide an external force needed to change the velocity of the piece of rock.

From Newton's first law of motion, an object in a state of rest or uniform motion in a straight line, will continue in that state unless it is acted upon by an external force.

Thus, the absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.

Learn more about outer space here: https://brainly.com/question/24701339

Answer:

inertia

Explanation:

A body of mass 5kg is ejected vertically from the ground when a force of 600N acts on it for 0.1s. Calculate the velocity with which the body leaves the ground.​

Answers

Assuming g=10N

upward force=600N(applied force)

downward force=(W)=(5x10)=50N

net force=600-50

=550N

F=(delta)P/t

(delta)P=m (v-u)

u=0m/s

(delta)P=mv

550=(5)(v)/0.1

550x0.1

55=5v

v=11m/s

there was no mention of any gravity acting on the object only applied force ,infact we aren't even given the constant

so many assumptions have been made whyyyyyyy!!!

what's your take on it scientists

Read the following statements, and then select ALL true statements about light.
Light travels in waves
Visible light is part of the
electromagnetic spectrum
Light travels in straight lines
Light is a form of energy
Read the following statements, and then select ALL true statements about light.
Light travels in waves
Visible light is part of the electromagnetic spectrum
Light travels in straight lines
Light is a form of energy

Answers

Light travels in straight lines

Light is a form of energy.

Light travels in waves.

The work done in moving a block across a rough surface and the heat energy gained by the block can both be measured in ...

Answers

The work done in moving a block across a rough surface and the heat energy gained by the block can both be measured in Joules.

What are Joules?

Joules is a unit of measurement used in physics that indicates the force exerted on a particular object.

A Joule is a work when a force that equals one (1) newton moves an object one (1) meter in a given direction.

Joules is the most widely extended unit of force and energy in physics and related disciplines.

Learn more about Joules here:

https://brainly.com/question/490326

What happens when red, blue, and green light come together?

Answers

Answer:

I believe if red, blue, and green light come together it would produce White light.

Answer:

you get a light white

Explanation:

What is the term for either the number of times per second that a wave vibrates or the number of matching points that pass a location during one second? O A. Frequency B. Period O C. Wavelength D. Amplitude​

Answers

The right answer is Frequency. Option A

Frequency is defined as the number of wave oscillations per unit of time and is measured in hertz. Frequency is directly proportional to pitch. Distance from the rest position to maximum shaft deflection. Frequency The number of waves he passes through a particular point per second. Measures the time it takes for a wave cycle to complete.

Maximum displacement or distance traveled by a point on the vibrating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. The frequencies are opposite. The number of wave cycles to complete per second. Both amplitude and wavelength are measures of distance. Amplitude measures the height of the wave crest from the centerline. Wavelength measures the horizontal distance between cycles.

Learn more about A wave vibrates here:-https://brainly.com/question/673791

#SPJ1

A man tries to push a 200 kg Car that moves at a acceleration 0.50 m/s2. The man is able to displace the car 10 m. How much work did he do?

Answers

The work done by the man pushing the car over the given distance is 1000J.

Given the data in the question;

Mass of car; [tex]m = 200kg[/tex]Acceleration of the car; [tex]a = 0.5m/s^2[/tex]Distance covered by the car; [tex]d = 10m[/tex]

Work done; [tex]W = \ ?[/tex]

Work done

Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;

[tex]Work\ done = f * d[/tex]

Where f is force applied and d is distance travelled.

To determine the work done by the man, we first solve for the force applied F.

From Newton's Second Law; [tex]Force \ F = m * a[/tex]

We substitute our given values into the expression

[tex]F = m * a \\\\F = 200kg * 0.5m/s^2\\\\F = 100kg.m/s^2[/tex]

Next we substitute our values into the expression of work done above.

[tex]Work \ done = f * d\\\\Work \ done = 100kg.m/s^2 * 10m\\\\Work \ done = 1000kgm^2/s^2\\\\Work \ done = 1000J[/tex]

Therefore, the work done by the man pushing the car over the given distance is 1000J.

Learn more about work done: https://brainly.com/question/26115962

Which statement describes the force diagram? the forces are balanced. the box will move to the right. the box will move to the left. the forces are unbalanced.

Answers

The answer will be A The forces are balanced. Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction.

what is force?

Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.

The length of each arrow represents the magnitude of each force, while the direction of each arrow represents the direction of each force.

From the diagram, we see that the four arrows have all same length: this means that the four forces have same magnitude, therefore they are balanced in pair. In fact:

On the vertical direction, the normal reaction ([tex]F_N[/tex]) balances the weight of the box ([tex]F_g[/tex])

On the horizontal direction, the push ([tex]F_P[/tex]) balances the force of friction ([tex]F_f[/tex])

Hence the answer will be A. the forces are balanced.

To know more about Force follow

https://brainly.com/question/25239010

Answer:

A is your answer.

Explanation:

Good luck on your exam!

Other Questions
A certificate that authorizes an employer to withhold federal income taxes from each employee is called a Forma. W-2.b. 1040.c. W-4.d. 1040EZ. What adaptation trait did the mice have before their environment changed? Jacob sells his motorbike for 112 making a loss of 12% on its original price. Work out its original price The equilibrium for the reaction between (ch3)2nh a weak base QUESTION 382 pointsSave AnLimits that are placed on the extent and type of campaigning a judicial candidate may or may not engage in or the informationthat can be discussed in a judicial campaign can be a disadvantage to electing a judge for officeA)TrueB)False please help i am confused. Create a hypothesis for why homeowners insurance continues to increaseannually while renters insurance does not. Why might a special election be held?Choose exactly two answers that are correct.to recall a public official from officeto elect a presidentto fill a vacant public officeto hold a special election for Congress Suppose youre out of acetic acid (ch3cooh) and decide to use ethanol (ch3 ch2oh) as the solvent in the transformation of 3 into 4. Would this be a wise choice, and why? Eyeglasses are one example of how technology has improved lives.Please select the best answer from the choices providedTF PLEASE ANSWER ASAP. Write a report demonstrating your understanding of the inspiration and authenticity of God's Word. Select four of the books of the Bible, two from the Old Testament and two from the New Testament. Construct an essay of at least three hundred words showing their evidence of both internal and external evidence in your paper. ploring Comparative Elementsvement of the progress bar may be uneven becouse ouestions con be worth more or less including zero) depending on your answerRead the following prompt:Compare and contrast the use of mice and chimpanzees in medical research.Which is the best evaluative thesis for the prompt?ONeither mice nor chimp studies eliminate the need for drug trials on humans. Write an expression for the coefficient of kinetic friction between the block and the horizontal surface. Your answer should be in terms of x, vB, and g (the acceleration due to gravity) A puppy weighs 4 pounds. How many ounces does the puppy weigh? Rewrite 4 as a fraction. 4/4 4/1 1/4 100 PTS AND BRAINLIEST WRONG ANSWERS REPORTEDThe function p(w)=230(1.1)^W represents the number of specialty items produced at the old factory wweeks after a change in management. The graph represents the number of specialty items produced at thenew factory during the same time period.(a) During Week 0, how many more specialty items were produced at the old factory than at the newfactory? Explain.(b) Find and compare the growth rates in the weekly number of specialty items produced at each factory.Show your work. do you guys know this? Refer to Figure 8-9. The loss of producer surplus as a result of the tax is a. $3,000. b. $6,000. c. $9,000. d. $12,000. What is the simplest form of2(3x-2y) + 3(x-3y) Use the figure to answer the question.What is the area of the triangle on the left?