Answer : The true dip of that sandstone bed is 25°95'.
The apparent dip of the bed on the walls of the gorge is the angle that the bed strikes across the stream and down the narrow gorge. we calculate the angle of the bed relative to the horizontal plane. The true dip is the angle of inclination of the bed below the horizontal plane.
True dip = 90° - (90° - 25°95') = 25°95'. the true dip of the sandstone bed is 25°95', which is the angle of inclination of the bed below the horizontal plane.
Know more about angle of inclination here:
https://brainly.com/question/29360090
#SPJ11
Which of the layers in the atmosphere do temperatures vary the most?
Answer:
The Troposphere
Explanation:
It has most of our weather like rain, snow, and clouds. On this part of the atmosphere, the temp gets cold as the amount of space above the earth increases.
Assuming the sand dune (illustrated below) was deposited by wind currents 200 million years ago, which way was the wind blowing?Image: similar to the pair&share photo of the Jurassic Navajo Sandstone in Utah from the "Play in the Mud (and Sand)" lectureA) wind was blowing from the left to rightB) wind was blowing from right to leftC) wind was blowing both waysD) can't determine from the information given
The sand dune (illustrated below) was deposited by wind currents 200 million years ago, which way was the wind blowing wind was blowing from right to left. The correct answer is B) the wind was blowing from right to left.
To determine the wind direction, we need to analyze the sand dune's structure. Sand dunes have two distinct sides: the windward side and the leeward side. The windward side is the side facing the wind, and it has a gentle slope. The leeward side is the side sheltered from the wind, and it has a steeper slope.
In this case, we can see that the left side of the dune has a steeper slope, while the right side has a more gentle slope. This indicates that the wind was blowing from the right, carrying sand grains up the gentle slope on the right side of the dune. Once the wind reached the top of the dune, it lost its carrying capacity, causing the sand grains to fall and accumulate on the steeper left side of the dune, forming the leeward side.
So, considering the structure of the sand dune and the slopes, we can conclude that the wind was blowing from right to left 200 million years ago when the sand dune was deposited. The correct answer is B) the wind was blowing from right to left.
For more about deposited:
https://brainly.com/question/22697743
#SPJ11
the annual cycle of prevailing weather conditions at a given place based on long-term contitions is known as: weather. a trend cyclone climate global warming
The annual cycle of prevailing weather conditions at a given place based on long-term conditions is known as climate.
The term weather is used to refer to short-term conditions such as precipitation, temperature, and wind. The climate of a region is determined by a variety of factors, including latitude, elevation, prevailing winds, and the presence of land and water bodies.
It can be classified into different categories based on temperature, precipitation, and other factors. In general, climate change refers to long-term changes in weather patterns and temperature around the world, while global warming refers specifically to the gradual warming of the planet's surface due to increased levels of greenhouse gases in the atmosphere. Cyclones, on the other hand, are severe tropical storms that can cause significant damage and loss of life. Trends are statistical measurements of changes over time. The correct answer is "climate."
To know more about prevailing weather refer here:
https://brainly.com/question/17922964
#SPJ11
an example of a primary effect of drought is question 15 options: a drop in groundwater levels rolling blackouts a decrease in tourism low dissolved oxygen content in reservoirs
An example of a primary effect of drought is a drop in groundwater levels.
When droughts occur, one of the most common outcomes is a drop in groundwater levels. As the amount of precipitation drops, the amount of water that enters the soil also drops, resulting in a decrease in groundwater levels. As groundwater levels decline, it becomes more challenging to access enough water to meet the needs of communities and agriculture.
As a result, water scarcity becomes an increasingly serious issue.
Therefore, a drop in groundwater levels is a primary effect of drought. Rolling blackouts, a decrease in tourism, and low dissolved oxygen content in reservoirs are all secondary effects of drought.
Drought is a prolonged dry period in the natural climate cycle that can occur anywhere in the world. It is a slow-onset disaster characterized by the lack of precipitation, resulting in a water shortage. Drought can have a serious impact on health, agriculture, economies, energy and the environment.
Answer: a drop in groundwater levels.
To know more about Drought, refer here:
https://brainly.com/question/26693108
#SPJ11
8. What is the collective role of water vapor, carbon dioxide, ozone, and methane in the atmosphere?
A. They prevent harmful ultraviolet radiation of the sun from reaching earth
B. they are important components of the water cycle, which regulates the earths temperature
C. they regulate earths climate by trapping heat and holding it within earths atmosphere
D. they scatter almost a third of the sunlight that reaches the outer layers of the atmosphere back into space
Answer: C. They regulate Earth's climate by trapping heat and holding it within Earth's atmosphere.
further west from this deep u.s. trough, eastern alaska, as well as yukon and british columbia, canada, were being impacted by a . a. ridge b. trough g
Further west from the deep U.S. trough, Eastern Alaska, as well as Yukon and British Columbia, Canada, were being impacted by a ridge.
A ridge of high pressure is impacting Eastern Alaska, Yukon and British Columbia in Canada, further west from the deep U.S. trough. A ridge of high pressure is an area of high atmospheric pressure, which is associated with fair weather, light winds and generally pleasant conditions. This ridge is formed when two air masses move away from each other, causing the air pressure in the area to increase. A ridge is typically indicated on a weather map by a line of red L's. The L's are placed on the map in the direction of the wind flow around the ridge, with the point of the L representing the area of highest atmospheric pressure.
The increased atmospheric pressure caused by the ridge produces lighter winds and warmer temperatures. The warmer temperatures and decreased wind speeds generally lead to more stable weather conditions and less precipitation. The ridge can also bring dry and sunny conditions, as well as a decrease in storm activity. These effects can be felt further downwind of the ridge, making it a welcomed feature in many areas.
In contrast, a trough is typically associated with low-pressure areas that produce wet, stormy weather conditions, as well as cool temperatures. This is because the low-pressure system promotes the formation of clouds and precipitation, which can reduce the amount of solar radiation that reaches the Earth's surface.
For more such questions on Ridge.
https://brainly.com/question/3404002#
#SPJ11
in addition to the mineral above, this rock also contains quartz, plagioclase, muscovite, and kyanite. based on your observations and the mineral assemblage, what kind of rock is this? choose one: a. phyllite b. gneiss c. quartzite d. slate e. schist
Phyllite is a kind of rock that also contains quartz, plagioclase, muscovite, and kyanite. Thus, option a is correct.
Phyllite is generally located black to gray, or light greenish-gray in color inside the earth. It has a wrinkled or wavy formation as its foliation. Phyllite is a stable and very soft rock that is formed naturally by the wind. It is mainly used by cemetery markers in buildings.
Phyllites are most typically found in the Dalradian metasediments of northwest Arran areas. Quartz and feldspar are discovered in large amounts in phyllite. Phyllite has a reasonable preference to break into sheets. Tredorn Phyllite and Woolgarden phyllites are found in North Cornwall along the banks of the rivers.
To learn more about Phyllite
https://brainly.com/question/984436
#SPJ4
does the southern hemisphere experience hotter summers and colder winters? i ask this because the earth's perihelion is in winter for the northern hemisphere (around january 3rd)
Yes, the Southern Hemisphere does experience hotter summers and colder winters. This is because of the way the Earth's orbit around the Sun is tilted relative to its axis of rotation. The Earth's perihelion, or point of closest approach to the Sun, is in January for the Northern Hemisphere, while it is in July for the Southern Hemisphere.
This means that the Northern Hemisphere gets less direct sunlight during winter, causing colder temperatures, while the Southern Hemisphere gets more direct sunlight during summer, leading to hotter temperatures.
The Earth's axial tilt, or obliquity, is responsible for the Earth's seasons. During winter, the Northern Hemisphere is tilted away from the Sun, and during summer it is tilted towards the Sun. Conversely, the Southern Hemisphere is tilted away from the Sun during summer, and towards the Sun during winter. This difference in angle of sunlight causes the Northern Hemisphere to experience colder winters and hotter summers, while the Southern Hemisphere experiences hotter summers and colder winters.
Additionally, the Southern Hemisphere is more exposed to the ozone layer, which absorbs some of the Sun's ultraviolet radiation, leading to slightly higher temperatures. This explains why the temperatures in the Southern Hemisphere are higher than the Northern Hemisphere during the same season.
To learn more about Southern Hemisphere here:
https://brainly.com/question/26395353#
#SPJ11
he san andreas fault is... group of answer choices associated with deep focus earthquakes a world-famous example of a hot spot is an intraplate fault within the juan de fuca plate an oceanic transform fault a continental transform fault
The San Andreas Fault is a continental transform fault, which is a type of fault that occurs at the boundary between two tectonic plates.
The San Andreas Fault marks the boundary between the Pacific Plate and the North American Plate. The two plates slide past each other horizontally in opposite directions. As the plates move, they cause earthquakes with deep focus, which are powerful earthquakes that occur far beneath the surface.
An example of a world-famous hot spot is the Hawaii Islands, which form due to magma rising up from the Earth's mantle. This is a form of intraplate volcanism, which occurs at locations that are not on tectonic plate boundaries. In contrast, transform faults are located on plate boundaries, and the San Andreas Fault is a prominent example.
To learn more about San Andreas Fault here:
https://brainly.com/question/11096257#
#SPJ11
which element is found in greater amounts in low viscosity magma, than in high viscosity magma? question 12 options: a) si b) fe
Si (Silica) is found in greater amounts in low viscosity magma, than in high viscosity magma. Option A is correct answer.
High silica content magmas will consequently show higher levels of polymerization and have higher viscosities than magmas with low silica concentration. A substance's viscosity is a measurement of its consistency. A substance's viscosity is defined as its capacity to resist flow. Viscosity is, in some ways, the inverse of fluidity. Because cold molasses is less fluid than water, it has a greater viscosity.
The temperature, composition, and gas concentration of a magma all influence its viscosity. The relationship between temperature and viscosity is self-evident. The greater the temperature, like with most liquids, the more fluid the material becomes, reducing its viscosity.
Learn more about Magma here:
https://brainly.com/question/23661578
#SPJ4
can you identify the minerals that comprise igneous rocks? drag the appropriate labels to their respective targets. the specific colors of the referenced mineral crystals within the rocks have been supplied to assist you. labels will only be used once, and not all labels will be used.\
Igneous rocks are made up of different minerals depending on the type of rock. The most common minerals found in igneous rocks are quartz, feldspar, mica, hornblende, and pyroxene. Quartz is usually colorless or white, feldspar can be white, pink, or gray, mica can range from green to brown to black, hornblende is usually black or green, and pyroxene is usually black.
Granite is an example of an igneous rock that contains quartz, feldspar, mica, and hornblende. Basalt is an example of an igneous rock that contains feldspar, pyroxene, and sometimes olivine. Peridotite is an example of an igneous rock that contains olivine, pyroxene, and sometimes hornblende.
The minerals in igneous rocks can be identified using a variety of methods including color, hardness, streak, luster, and cleavage. Color can be used to distinguish between different minerals; quartz is usually colorless or white, feldspar is usually pink, gray, or white, mica is usually green, brown, or black, hornblende is usually black or green, and pyroxene is usually black.
Hardness is another way to distinguish between different minerals. Quartz is the hardest mineral and has a hardness of 7 on the Mohs scale. Feldspar is slightly softer with a hardness of 6, mica has a hardness of 2-3, hornblende has a hardness of 5-6, and pyroxene has a hardness of 5-6.
The streak of a mineral is the color it leaves when scratched on a streak plate. The streak of quartz is white, the streak of feldspar is white or gray, the streak of mica is white, the streak of hornblende is black, and the streak of pyroxene is black.
Luster is another way to identify different minerals. Quartz has a vitreous luster, feldspar has a pearly or dull luster, mica has a pearly or silky luster, hornblende has a vitreous or pearly luster, and pyroxene has a vitreous or dull luster.
The cleavage of a mineral is how it breaks when it is struck or compressed. Quartz has no cleavage, feldspar has two directions of cleavage, mica has one direction of cleavage, hornblende has two directions of cleavage, and pyroxene has two directions of cleavage.
To learn more about Igneous rocks here:
https://brainly.com/question/20538428#
#SPJ11
to what extent do we think the geologies of the terrestrial worlds were destined from their births? explain.
The geological features of the terrestrial worlds have been influenced factors such as the initial composition of the protoplanetary disk, the planet's distance from the Sun, its size, the presence or absence of a magnetic field, and others.
The geological features of these planets are thus not predetermined from their birth but are influenced by various factors that continue to act on them.
The geological features of these planets are therefore not predetermined from their birth but are influenced by a variety of factors that continue to act on them.
What is the Terrestrial World?
Terrestrial planets, also known as rocky planets or telluric planets, are planets that are primarily composed of silicate rocks or metals. In contrast to gas giants, which are primarily composed of hydrogen and helium, terrestrial planets have a solid surface layer and a central core that is made up of metal. Mercury, Venus, Earth, and Mars are the four terrestrial planets in our solar system.
The geology of the terrestrial worlds is therefore dependent on a variety of factors, which include factors such as the planet's size, distance from the Sun, and its history of volcanic activity.
To know more about Terrestrial World, refer here:
https://brainly.com/question/29032123
#SPJ11
what is an aquifer, igneous and metamorphic rocks are not good aquifers as they contain little natural porosity or permeability.
An aquifer is an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials (gravel, sand, or silt) from which groundwater can be extracted. Igneous and metamorphic rocks generally contain little natural porosity or permeability and therefore cannot be used as aquifers. Igneous rocks, for instance, form when molten magma cools and solidifies.
The cooling process does not leave much space for porosity and permeability. The recrystallization of the rock grains during metamorphism also does not leave much space for porosity and permeability.
Aquifers can be found in sedimentary rocks like sandstone, limestone and shale because the grains of these rocks are arranged in a way that allows for more porosity and permeability.
Know more about Igneous rocks here:
https://brainly.com/question/23555197
#SPJ11
which of the following is not a low-latitude climate region? mansoon wet equatorial dry tropical tropical savanna humid subtropical
Answer: A low latitude climate is a tropical climate, exemplified by areas in or near the equator.
which term describes a soil that remails in place after having formed by weathering of the underlying bedrock? residual relict transformational transported
The term that describes soil that remains in place after having formed by weathering of the underlying bedrock is residual soil.
What is residual soil?
Residual soil, also known as residuum, is soil that forms from the weathering of bedrock that has remained in place. This soil is formed by in situ weathering and usually remains where it is formed. The weathering processes cause the bedrock to disintegrate into small particles, resulting in the formation of residual soil.
Residual soils are usually found on slopes and hilltops, where weathering is highest, and are often composed of coarse particles due to the intense weathering that occurs. They are generally thick and can be of varying depths depending on the bedrock they have formed from. The soil is typically rocky and nutrient-poor, which limits plant growth. Residual soils are classified as 4th-order soils according to the Soil Taxonomy. The Soil Taxonomy ranks soils into 12 orders based on their characteristics.
Residual soil is soil that forms from the weathering of bedrock that has remained in place.
Residual soils are usually found on slopes and hilltops, where weathering is highest. They are typically rocky and nutrient-poor. Residual soils are classified as 4th-order soils according to the Soil Taxonomy.
The word used to describe soil that stays in its original place after being formed by the weathering of the underlying bedrock is "residual soil".
To learn more about the "residual soil": https://brainly.com/question/1197082
#SPJ11
which of the following glacial features is indicative of the local climate becoming dry and cold? group of answer choices boulder trains. striation. drumlins. loess.
The glacial feature that is indicative of a local climate becoming dry and cold is loess.
Loess is an unconsolidated, silty sediment deposited by the wind, typically found in arid or semi-arid climates. It is usually found on the leeward side of mountains and hills, and is often found in association with glacial deposits.
This process is often found in regions of glacial feature, such as mountain ranges and hillsides. The sediment accumulates in layers of silt, which eventually hardens and forms loess.
Learn more about climate: https://brainly.com/question/17922964
#SPJ11
based upon your analysis, most stratovolcanoes form in which tectonic setting? group of answer choices divergent boundaries oceanic-continental convergent boundaries mantle plumes (hotspots) all of the above
The correct option is All of the above i.e. D. Most stratovolcanoes form in convergent boundaries, which occur when two tectonic plates collide. This collision causes one of the plates to slide beneath the other, creating a subduction zone.
The subducting plate melts due to the extreme pressure and heat created from the collision, resulting in magma being forced upward to form a stratovolcano. Oceanic-continental divergent boundaries can also form stratovolcanoes, as the plate separation creates a rift zone.
Mantle plumes, also known as hotspots, can also form stratovolcanoes when a column of hot material from the mantle rises up through the Earth's crust, creating a weak area of the crust which can then be filled with magma. All of these tectonic settings can create stratovolcanoes. The correct option is All of the above i.e. D.
To know more about stratovolcanoes, click here:
https://brainly.com/question/30059776
#SPJ4
at night, the air above the mountain slopes and drains into the warm valley below, creating a .
At night, a process called radiation cooling causes the air on the mountain slopes to cool more quickly than in the valley below. This creates a temperature inversion, where the air temperature at the top of the mountain is cooler than at the base.
The temperature inversion also has other effects, such as creating a stable layer of air that traps pollutants near the ground and limits visibility. Additionally, the process helps to distribute moisture more evenly throughout the environment.
This is a vital part of many mountain ecosystems, and an important factor to consider when studying climate patterns and air quality in mountainous areas.
Know more about radiation cooling here:
https://brainly.com/question/3182008
#SPJ11
in the absence of friction, the combined effect of the coriolis force and the pressure gradient force produces question 75 options: air flow from low to high pressure centers. surface winds. air flow in a north-south direction. geostrophic winds at altitudes above the ground. air flow perpendicular to the isobars.
winds that are geostrophic at heights above the earth. The creation of high and low-pressure systems is a result of geostrophic winds,
A theoretical wind known as geostrophic wind is produced when the atmosphere's Coriolis force and pressure gradient force are balanced. When there is no friction, the air moves at a constant speed parallel to the isobars. In the upper atmosphere, where the pressure gradient force predominates and the Coriolis force is considerable, this sort of wind is frequently observed. The creation of high and low-pressure systems is a result of geostrophic winds, which are also crucial to the atmosphere's general circulation. But friction and turbulence at the Earth's surface also contribute to the complexity and variability of the wind.
learn more about geostrophic winds here:
https://brainly.com/question/28168682
#SPJ4
which of the following primary pressure areas are produced by thermal factors, rather than dynamic factors? question 62 options: equatorial low and polar high equatorial low and bermuda high aleutian low and icelandic low subtropical high and subpolar low
The answer is: Equatorial low and polar high.
These two areas are primarily influenced by temperature differences, which are a type of thermal factor, rather than dynamic factors such as the movement of air masses.
Help me with this please.
Evidence Card: Prevailing Winds in a Normal Year.
Explanation of Evidence: Prevailing winds near the equator affect ocean temperatures and currents, which in turn can influence weather patterns globally, including in Christchurch.
Best Supported Claim: Christchurch's air temperature during El Niño years is cooler than usual because the prevailing winds near the equator change, leading to altered ocean temperatures and currents that affect global weather patterns.
What is the evidence about?The evidence from the Prevailing Winds in a Normal Year card suggests that the prevailing winds near the equator can influence ocean temperatures and currents, which in turn can have a global impact on weather patterns. This information is relevant to the question at hand because El Niño is a phenomenon that occurs when the prevailing winds in the equatorial Pacific weaken or reverse, causing warmer than usual ocean temperatures and altering weather patterns globally.
Therefore, the best-supported claim is that Christchurch's air temperature during El Niño years is cooler than usual because the prevailing winds near the equator change, leading to altered ocean temperatures and currents that affect global weather patterns.
Learn more about temperature on
https://brainly.com/question/24746268
#SPJ1
which of the following are geologic settings where travertine can form? choose one or more: a. in glacial lakes b. in caves c. in fast-moving rivers d. near hot springs e. in swamps
Travertine can form in a variety of geologic settings, including in caves, near hot springs, and in fast-moving rivers. Therefore the correct option is option A, B and C.
In caves, travertine forms as a result of carbon dioxide in the air dissolving in water. This results in an increase in the acidity of the water, which in turn dissolves the rock the cave is made of and deposits the resulting sediment in the form of travertine.
Near hot springs, the water is saturated with dissolved minerals such as calcium carbonate, which can also be deposited in the form of travertine.
In fast-moving rivers, the increased turbulence can cause the suspended sediment in the water to become trapped and deposited in the form of travertine.
Travertine can also form in glacial lakes, but not in swamps.
For such more question on geologic:
https://brainly.com/question/11639207
#SPJ11
does the change of environment from the base of the section up to the thick gray shale indicate an advance (transgression) or retreat (regression) of the sea?
The change of environment from the basal conglomerate to the thick gray shale indicates a transgression of the sea, as smaller clast size suggests a deeper marine environment.
During a transgression, sea level rises, leading to the inundation of previously exposed land areas. As the sea advances, the environment changes from terrestrial to marine, and sediments deposited also change from coarser to finer-grained. In this case, the transition from the basal conglomerate to the thick gray shale suggests a deepening of the marine environment as indicated by the decreasing clast size, indicating that the sea level was rising during this period.
Learn more about sea-level regression https://brainly.com/question/13436092
#SPJ11
What are the 5 stages of solar system formation?
The 5 stages of solar system formation are Solar Nebula, Protostar and Protoplanetary Disk, Planetesimals, Protoplanets and Solar System.
The 5 stages of solar system formation are:
1. Solar Nebula: A cloud of dust and gas, called the solar nebula, begins to collapse due to gravitational forces. As it collapses, the material starts to spin and flatten into a disk shape.
2. Protostar and Protoplanetary Disk: The material in the center of the disk becomes denser, forming a protostar. Meanwhile, the remaining material in the disk starts to clump together, creating a protoplanetary disk around the protostar.
3. Planetesimals: Within the protoplanetary disk, solid particles collide and stick together, forming larger bodies called planetesimals. These planetesimals continue to grow as they collect more material from the disk.
4. Protoplanets: As planetesimals grow and interact, some merge through collisions, eventually forming larger bodies known as protoplanets. Protoplanets continue to evolve and differentiate, developing into the planets we observe in our solar system today.
5. Solar System: Over time, the protostar at the center of the system becomes a fully-fledged star (our Sun), while the remaining protoplanetary disk material is cleared out, leaving the planets, moons, asteroids, and other bodies orbiting the star. This marks the formation of the solar system.
For more about solar system:
https://brainly.com/question/12075871
#SPJ11
precipitation of gypsum due to evaporation of seawater produces which kind of sedimentary rock? group of answer choices biochemical chemical clastic organic
Clastic sedimentary rock is formed when precipitation of gypsum due to evaporation of seawater occurs.
Clastic sedimentary rock is formed when fragments of pre-existing rocks or minerals are compacted and cemented together. Clastic sedimentary rocks are formed from the accumulation and consolidation of fragments of pre-existing rocks or minerals, which are transported and deposited by various agents such as water, wind, or ice. Examples of clastic sedimentary rocks include sandstone, shale, and conglomerate.
Gypsum is a mineral that can be precipitated from evaporating seawater, but it does not form clastic sedimentary rock. Gypsum can form chemical sedimentary rocks, such as rock gypsum or alabaster.
Learn more about Clastic sedimentary rock at: https://brainly.com/question/30553283
#SPJ11
briefly explain why a permanent temperature inversion (temperature increases with height) occurs throughout stratosphere
A permanent temperature inversion, in which temperature increases with height, occurs throughout the stratosphere because of the presence of ozone in the stratosphere.
The absorption of ultraviolet radiation by ozone causes the stratosphere to be heated. Due to the high temperatures of the stratosphere, the temperature increases with increasing altitude.
Additionally, the stratosphere is relatively dry, with little to no water vapor to absorb or emit heat, contributing to the permanent temperature inversion.
A permanent temperature inversion layer in the stratosphere helps to stabilize the atmosphere and prevent vertical mixing between the stratosphere and the troposphere below. This plays an important role in regulating our climate, as it helps to maintain the atmospheric conditions necessary for life on Earth. By preventing mixing, the temperature inversion layer helps to keep the troposphere cooler and drier than the stratosphere, which can have significant impacts on weather patterns and the overall climate system.
To learn more about the "temperature inversion and stratosphere": https://brainly.com/question/28097222
#SPJ11
the giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of, is:
The giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of, is Uranus.
Uranus is the giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of. Uranus is the seventh planet from the Sun, and it was the first to be discovered by means of a telescope. It's also the third-largest planet in terms of diameter, and it's the fourth-most massive.
Uranus is also distinctive in that it is the only planet in the solar system that has an axis that is nearly perpendicular to the plane of its orbit. In addition, Uranus is primarily composed of hydrogen, helium, and methane, which accounts for its pale blue color. Uranus' atmosphere contains bands of clouds that are made up of methane crystals. The planet also has an extensive system of rings and a multitude of moons orbiting it.
know more about planet here
https://brainly.com/question/14581221#
#SPJ11
despite having a lower global warming potential and a shorter residence time in earth's atmosphere, co2 is the most important radiative forcing behind global warming because -
CO2 is the most important radiative forcing behind global warming because it is the most abundant of all the greenhouse gases in the atmosphere and its residence time in the atmosphere is very long.
This allows it to accumulate and persist over a long period of time, and so its radiative forcing effect is greater than other greenhouse gases with a lower global warming potential and a shorter residence time.
While other greenhouse gases, such as methane and nitrous oxide, have a greater warming potential, they are present in much smaller quantities in the atmosphere than CO2.
Furthermore, CO2 emissions have been increasing steadily due to human activities such as burning fossil fuels and deforestation, leading to a buildup of CO2 in the atmosphere over time
To know about greenhouse gases refer here:
https://brainly.com/question/14131369#
#SPJ11
most sediment on the continental shelf is derived from a. erosion on the continent b. life in the sea c. aliens d. chemical reactions in the water
Chemical reactions in the water and aliens are not significant sources of sediment on the continental shelf. The correct option is d.
Most sediment on the continental shelf is derived from erosion on the continent.
What is the continental shelf?The shallow oceanic area is known as the continental shelf.
It is located next to the shore and extends from the shore to the continental slope.
The water depth in the continental shelf ranges from 100 meters to 200 meters, depending on the location, and the slope of the shelf ranges from 0.1 to 1 degree.
The main source of sediment on the continental shelf is erosion on the continent.
When rocks and soil are exposed to the elements, such as wind, rain, and temperature fluctuations, they begin to erode.
This can result in sediment that is transported by rivers to the ocean and deposited on the continental shelf.
Other sources of sediment on the continental shelf include volcanic eruptions, underwater landslides, and other natural events.
Life in the sea is also a source of sediment, as organisms such as corals and clams produce shells and other materials that eventually break down and contribute to the sediment on the sea floor.
However, the primary source of sediment on the continental shelf is erosion on the continent.
TO KNOW ABOUT Chemical reactions refer here :
https://brainly.com/question/4227051#
#SPJ11
temperature, pressure, wind and moisture are measured through the depth of the troposphere by what instrument? group of answer choices rawinsonde doppler radar goes satellite
Temperature, pressure, wind and moisture are measured through the depth of the troposphere using Rawinsonde instrument.
Rawinsonde is an instrument used to measure various meteorological parameters, including wind, temperature, and humidity. Rawinsonde is a balloon-borne instrument that is released into the air, and it sends back data as it rises. The balloon can rise to an altitude of around 100,000 feet before bursting, and the Rawinsonde instrument falls back to Earth. The data from the instrument are used to create a sounding, which is a profile of the atmosphere's temperature, pressure, and humidity as a function of altitude. The troposphere is the region of the atmosphere that is closest to the surface. It extends from the Earth's surface up to about 7-20 kilometers, depending on the latitude. The Rawinsonde instrument is used to measure the various meteorological parameters in the troposphere.
The Rawinsonde instrument consists of a weather balloon that is filled with helium gas. The balloon is released from the surface, and it rises through the atmosphere. As the balloon rises, the Rawinsonde instrument collects data on various meteorological parameters, including wind, temperature, and humidity. The data collected from the instrument are used to create a sounding, which is a profile of the atmosphere's temperature, pressure, and humidity as a function of altitude.
Learn more about troposphere measuring instrument https://brainly.com/question/30624338
#SPJ11