The given interval suggests that the mean number of porcupine teeth marks on all wooden blocks treated with the repellent is less than 6 since the upper limit of the interval is 5.8. This claim falls within the given interval and is supported by the data. Therefore, we can say that the mean number of porcupine teeth marks on all wooden blocks treated with the repellent is less than 6 based on the 95 percent confidence interval (4.9,5.8).
In the given scenario, a sample of 20 wooden blocks treated with a liquid repellent designed to reduce damage caused by porcupines were left outside in an area where porcupines are known to live. After some time, the blocks were inspected for the number of porcupine teeth marks visible. The data collected was then used to create the 95 percent confidence interval (4.9,5.8).
The 95 percent confidence interval can be defined as a range of values that we can be 95 percent confident the true population parameter falls within. In this case, the true population parameters is the mean number of porcupine teeth marks on all wooden blocks treated with the repellent.
From the given interval, we can conclude that we are 95 percent confident that the true mean number of porcupine teeth marks on all wooden blocks treated with the repellent is between 4.9 and 5.8.
Therefore, any claim that falls within this interval is supported by the data.
for such more questions on parameters
https://brainly.com/question/29344078
#SPJ11
w(x)= -5(x-8)(x+4)
What is the maximum height that the stone will reach?
Answer:
(2, 180)
Step-by-step explanation:
w(x)=-5x^2+20x+160
a=-5 b=20
x=-20/2x(-5)
x=2
w(2)=180
2, 180
GM is tangent to circle O at point G, and GS
is a secant line. If mGS = 84°, find
m/SGM.
Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.
What is secant line?Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.
the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:
m∠MGS = 90°
Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.
m∠SGM = 1/2 (mSE - mGE)
where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.
Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.
mSE = 2mGS
mSE = 2(84°) = 168°
m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°
Therefοre, m∠SGM = 84°.
To knοw more about secant line visit,
https://brainly.com/question/14438198
#SPJ1
if a college instructor alters the distribution of his or her students' midterm exam grades because the class did not do as well as last year's class, with what type of standards is the instructor most concerned?
The college instructor is most concerned with equity standards.
Equity standards are when an instructor adjusts grades to ensure fairness to all students regardless of their individual performances.
This means that if a class as a whole does not do as well as last year, the instructor will alter the distribution of grades so that the overall grades reflect the effort put in by the class.
For example, if the class average is a C, the instructor may raise some grades to a B or even A in order to ensure that the grades are fair to all students in the class.
To know more about Equity standards click on below link:
https://brainly.com/question/11138125#
#SPJ11
The following statement should determine if x is not greater than 20. Explain what is wrong with it and write the correction. if (!x > 20)
The student's original statement has an issue in the way the "not" operator is used. The "not" operator (!) is negating the entire expression, including the variable 'x', rather than just the inequality. This leads to incorrect evaluation.
To correctly determine if x is not greater than 20, you should use the "less than or equal to" (<=) operator instead. Here is the corrected statement:
if (x <= 20)
This statement will be true if x is less than or equal to 20, which is the intended condition.
for such more questions on inequality
https://brainly.com/question/24372553
#SPJ11
Jaxon invested $710 in an account paying an interest rate of 8\tfrac{7}{8}8 8 7 % compounded quarterly. Jason invested $710 in an account paying an interest rate of 8\tfrac{5}{8}8 8 5 % compounded continuously. After 8 years, how much more money would Jaxon have in his account than Jason, to the nearest dollar?
Answer:
I attached your answer along with an explanation
Step-by-step explanation:
Please Like me follow me and Give me Crown for more help. :)
rotate 270 degrees…what are the coordinates of B
PLS HELP
Answer:
8;-2
Step-by-step explanation:
8 is the x axis and -2 is the y axis
Answer:
Step-by-step explanation:
find the missing value to the nearest hundredth cos__=7/18
67.11
37.67
22.89
21.25
The missing value is approximately 64.12 degrees, which is closest to option D: 21.25 using inverse cos.
The inverse cosine (or arccosine) of both sides of the equation must be taken in order to locate the missing value in the equation cos = 7/18 to the closest tenth. We will then be able to convert the value of to degrees and round it to the closest hundredth using the value of the radian that is produced.
cos θ = 7/18
= arccos(7, 18, 7)
A 1.1181 radian angle
We can use the conversion factor /180 to convert radians to degrees.
θ = 1.1181 × 180/π
64.12 degrees.
As a result, the figure that is lacking is roughly 64.12 degrees, which is closest to choice D: 21.25.
Due to the periodic nature of the cosine function, there are often two solutions when determining the inverse cosine of a value. But, since the problem states that we should round to the closest hundredth, which suggests a single answer, we can disregard the second option in this instance. By reinserting the value we discovered into the original equation and making sure it equals 7/18, we can further confirm that the result is accurate.
Learn more about cos here:
https://brainly.com/question/16498526
#SPJ1
Given that New Mexico has a population of about 12 people per square miles and
an area of about 120,000 square miles, what is the population of New Mexico
Mark only one oval.
10,000
1,000,000
1,440,000
2,400,000
Answer:
1440000
Step-by-step explanation:
Since for every mile, there are 12 people, we have 120000 miles. If we multiply 12 by 120000, we get 1440000.
Determine the equation of the circle graphed below.
Answer:
Step-by-step explanation:
Circle centre: (4,7)
Radius: 3
Equation is:
[tex](x-h)^2+(y-k)^2=r^2[/tex] (where (h,k) is center, r is radius)
[tex](x-4)^2+(y-7)^2=3^2[/tex]
[tex](x-4)^2+(y-7)^2=9[/tex] (This is the general standard form )
in expanded form,
[tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]
[tex]x^2+y^2-8x-14y+56=0[/tex]
Note: Unless stated either form is an acceptable answer.
in a standard deck of 52 cards (4 suits, 13 numbers per suit), how many hands can we be dealt 5 cards that do not share a number
Answer: 1287
Step-by-step explanation:
d. if a student was an undergraduate business major, what is the probability that the student intends to attend classes full-time in pursuit of an mba degree (to decimals)?
0.4
The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.
Learn more about probability.
brainly.com/question/30034780
#SPJ11
what is $510,451 rounded to the nearest 1,000 dolllars?
Answer:
$510,000
Step-by-step explanation:
Since we are rounding to the nearest thousand, we can use the hundreds place to determine the if we need to round down or up.
Remember, 4 or less, round down. 5 or more, round up.
Since the hundreds digit is 4, we do not need to round.
We only need to change the rest of the digits to 0.
So, our answer would be $510,000.
Can yall help me out?
the answer is A: 63 square units
Answer:
A (Im not entirely sure if this is correct)
Step-by-step explanation:
how I got this answer is: I found the area of the two triangles which was 12.5 (because the area of a triangle is 1/2(b*h) and the base is 3 and the height is 7 then you divide that by two) and I added them up to get 21. Then you would multiply 3 by two because a triangle is half of a rectangle and you would do b*h for a rectangle area and then multiply that by 7 ot get 42 and you would add taht to 21 to get 63
a study was conducted to evaluate the stress level of senior business students at a particular college. forty students were selected at random from the senior business class, and their stress level was monitored by attaching an electrode to the frontalis muscle (forehead). for the forty students, the mean emg (electromyogram) activity was found to be 35.8 microvolts. in addition, the standard deviation of the emg readings was found to be 2.5 microvolts. what would be the 99% confidence interval on the true mean emg activity for all seniors in the class? (you should be using statistical software such as statcrunch.) group of answer choices [34.7296, 36.8704] [34.7296, 36.7804] [34.7456, 36.0566] [34.9672, 36.7840]
The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]
To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula
CI = X ± Zα/2 (σ/√n)
where
X = sample mean = 35.8
Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.
σ = sample standard deviation = 2.5
n = sample size = 40
Substituting these values into the formula, we get
CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].
Therefore, the correct option is (a) [34.7296, 36.8704]
Learn more about confidence interval here
brainly.com/question/24131141
#SPJ4
1. The orthocenter is outside the triangle. 2. An altitude is the same line segment as an angle bisector. 3. If the perpendicular bisector of one side of a triangle intersects the opposite vertex, then the triangle is isosceles
The solution of the match is
(1) Orthocenter (C) The point at which the altitudes of a triangle
meet.
(2) Centroid (D) The point at which the medians of a triangle
meet.
(3) Circumcenter (A) The point of intersection of the perpendicular
bisectors of the sides of a triangle.
(4) Incentre (B) The point at which the three angle bisectors
of a triangle meet.
The orthocenter of a triangle is the point where the altitudes of the triangle intersect. The orthocenter is not always inside the triangle, and in some cases, it may lie outside the triangle.
The centroid of a triangle is the point where the three medians of the triangle intersect. The centroid is always inside the triangle, and it is also the center of mass of the triangle.
The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect. The circumcenter is not always inside the triangle, and in some cases, it may lie outside the triangle.
The incentre of a triangle is the point where the three angle bisectors of the triangle intersect. The incentre is always inside the triangle, and it is also the center of the circle that is inscribed inside the triangle.
To know more about triangle here
https://brainly.com/question/8587906
#SPJ4
Complete Question:
Match the following.
(1) Orthocenter (A) The point of intersection of the perpendicular
bisectors of the sides of a triangle.
(2) Centroid (B) The point at which the three angle bisectors of
a triangle meet.
(3) Circumcenter (C) The point at which the altitudes of a triangle
meet.
(4) Incentre (D) The point at which the medians of a triangle
meet.
5. Janice is creating a design that is part of a logo consisting of a small and a large circle.
The diameter of the small circle is of the diameter of the large circle. The diameter of
the large circle is 27 centimeters. To the nearest tenth of a centimeter, what is the area
of the smaller circle?
27 cm
Answer: The area of the smaller circle is [tex]65.6cm^{2}[/tex].
Step-by-step explanation:
A = [tex]\pi r^{2}[/tex], r is the radius.
1. Find out the diameter of the small circle.
[tex]\frac{1}{3}(27)= 9[/tex]
2) Find out the radius, r.
[tex]radius = \frac{diameter}{2} =\frac{9}{2} =4.5[/tex]
3) We plugin r = 4.5 into the formula to solve the area of the smaller circle.
[tex]A=\pi r^{2}=\pi (4.5)^{2} =65.6cm^{2}[/tex]
Quadrilateral ABCD is inscribed in this circle.
What is the measure of angle B?
. in a classroom of 30 students, 3 of the students wear wrist watches. (a) if 14 students are selected with replacement, what is the probability that exactly 2 of them wear wrist watches? (b) if 14 students are selected without replacement,
Probability of
=0.0403.
The probability that exactly two of the 14 students selected with replacement will wear wrist watches is 3/30 * 2/29 * 27/28 * 26/27 = 0.0437.
The probability that exactly two of the 14 students selected without replacement will wear wrist watches is 3/30 * 2/29 * 26/28 * 25/27 = 0.0403.
Learn more about probability
brainly.com/question/28336521
#SPJ11
A sports scout for a team is looking for the more consistent player. The tables below represent points scored in one season by two different players.
Player A
3 rows
and 5 columns
10, 12, 6, 10, 13, 8, 12, 3, 21, 14, 7, 0, 15, 6, 16
Player B
3 rows and 5 columns
10, 3, 12, 26, 20, 24, 25, 26, 5, 48, 24, 18, 20, 27, 25
Compare the data in the tables. Which player should the scout choose? Explain your answer.
Based on the given information, the scout should choose Player A if they are looking for consistency.
What are range and standard deviation?
Range is the difference between the highest and lowest scores in the set.
Standard deviation measures how spread out the scores are from the mean.
To determine which player is more consistent, we need to look at the variability in their scores. One way to measure variability is to calculate the range and the standard deviation of each player's scores.
The smaller the range, the more consistent the player's scores are.
A smaller standard deviation indicates that the scores are closer together, which means the player is more consistent.
Using the data provided, we can calculate the range and standard deviation for both players:
Player A:
Range = 21 - 0 = 21
Standard deviation = 5.70
Player B:
Range = 48 - 3 = 45
Standard deviation = 10.89
From these calculations, we can see that Player A has a smaller range and a smaller standard deviation, which means that their scores are more consistent than Player B's. Therefore, the scout should choose Player A if they are looking for consistency.
To know more about the range and standard deviations visit:
brainly.com/question/14801621
#SPJ1
Rewrite the expression 2(10+12) using the distributive property of multiplication over addition
The expression 2(10+12) can be rewritten as 44 using the distributive property of multiplication over addition.
The distributive property is a fundamental property of arithmetic that relates multiplication to addition and subtraction. The distributive property of multiplication over addition states that for any numbers a, b, and c
a( b + c ) = ab + ac
Using this property, we can rewrite the expression 2(10+12) as
2( 10 + 12 ) = 2(10) + 2(12)
Here, we have distributed the factor of 2 over the terms inside the parentheses, using the distributive property. This gives us:
2(10+12) = 20 + 24
Simplifying further, we get
2(10+12) = 44
Learn more about distributive property here
brainly.com/question/6276874
#SPJ4
Near Pittsburgh, a cable car transports people from the Monongahela River valley to the community on top of the overlooking bluff. The Monongahela Incline has a grade of 78%. Find the measure of the angle the cable car track makes. with the valley floor. If necessary, round to the nearest degree.
The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
What is grade?The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.
To find the angle we use the trigonometric functions:
tan(θ) = grade = rise/run
Given that, the grade of the incline is 78%, then grade = 0.78.
θ = arctan(0.78) ≈ 38.7 degrees.
Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
Learn more about grade here:
https://brainly.com/question/29150359
#SPJ1
given the arithmetic sequence what is the domain for N?
The domain for n in the arithmetic sequence is the one in the first option:
all integers where n ≥1
What is the domain of N?We have a arithmetic sequence defined by the general formula:
aₙ = 4 - 3*(n - 1)
And we want to find the domain for the possible values of n that we can use in that formula.
Remember that the terms of a sequence are defined as:
a₁, a₂, a₃,...
So the values of n are positive whole numbers, in this case the first one is n = 1.
a₁ = 4 + 3*(1 - 1)
a₁ = 4
And then we can keep using any positive integer, then the correct option is:
all integers where n ≥1
Learn more about sequences at:
https://brainly.com/question/6561461
#SPJ1
6x6x6x6x6x6x6 devided by 6x6x6x6x6x6 in indext form
The result of 6x6x6x6x6x6x6 divided by 6x6x6x6x6x6 in index form is 6.
In index form, 6x6x6x6x6x6x6 divided by 6x6x6x6x6x6 can be written as:
(6⁷) / (6⁶).To divide two exponential expressions with the same base (in this case, 6), we can subtract the exponents:
6⁽⁷⁻⁶⁾ = 6¹ = 6.
Index form, also known as exponential form, is a way of writing numbers or expressions using exponents. In index form, a number is expressed as a base raised to a power or exponent.
Find out more about exponent
brainly.com/question/30066987
#SPJ4
What is the MAD of 12, 10, 12, 6, 8, 4, 2, 12,
The mean absolute deviation (MAD) of the given set of data is 3.875.
To calculate the mean absolute deviation, we first need to find the mean of the data set by adding up all the numbers and dividing by the total number of values:
Mean = (12 + 10 + 12 + 6 + 8 + 4 + 2 + 12) / 8
Mean = 8
Next, we find the absolute deviation of each number from the mean. To do this, we subtract the mean from each number and take the absolute value:
|12 - 8| = 4
|10 - 8| = 2
|12 - 8| = 4
|6 - 8| = 2
|8 - 8| = 0
|4 - 8| = 4
|2 - 8| = 6
|12 - 8| = 4
Then, we find the mean of the absolute deviations:
Mean absolute deviation = (4 + 2 + 4 + 2 + 0 + 4 + 6 + 4) / 8
Mean absolute deviation = 26 / 8
Mean absolute deviation = 3.875
Therefore, the mean absolute deviation of the given set of data is 3.875.
Learn more about Mean absolute deviation:
https://brainly.com/question/447169
#SPJ4
Complete Question:
what is the mean absolute deviation of the following set of data 12 10 12 6 8 4 2 12.
Priya has a recipe for banana bread. She uses 7 1/2 cups of flour to make 3 loaves of banana bread. Andre will follow the same recipe. He will make b loaves of banana bread using f cups of flour. Which of these equations represents the relationship between b and f?
Answer:
Step-by-step explanation:
asdf
8. describe the center and spread of the chi-square distributions. 9. what is the chi-square test statistic? is it on the formula sheet? what does it measure? 10. how many degrees of freedom does the chi-square distribution have? 11. what is the rule of thumb for all expected counts in a chi-square goodness of fit test?
8. Spread = SD = sqrt(2*df)
9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.
10. Degrees of 1 freedom does the chi-square distribution.
11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.
8. Describe the center and spread of the chi-square distributions.
Shape - skewed right because can't be zero
µ = df = tipping point
mode = df - 2 = peak
spread = SD = sqrt(2*df)
9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.
10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.
11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.
Learn more about Chi- square distribution at:
https://brainly.com/question/30259945
#SPJ4
Each voter from a random sample of 334 registered voters was asked their impression of two candidates running for the same national office. The
table summarizes the responses.
Which of the following is the me
Candidate A?
Favorable
Unfavorable
No opinion
Have not heard of
Candidate A. Candidate B
Favorable 138 200
Unfavorable 44 47 No Opinion 88 47 Haven’t heard of 64 40
Which of the following is the most appropriate method to use to estimate the proportion of all registered voters who have a favorable impression of Candidate A?
A. A one-sample z-interval for estimating a sample proportion
B. A one-sample z-interval for estimating a population proportion
C. A matched-pairs t-interval for estimating a mean difference
D. A two-sample z-interval for estimating a difference between sample proportions
E. A two-sample z-interval for estimating a difference between population proportions
The answer choice that is the most appropriate is B. A one-sample z-interval for estimating a population proportion
Why is this the most appropriate?
This is the most appropriate method because you are trying to estimate the proportion of all registered voters who have a favorable impression of Candidate A based on the sample data.
A one-sample z-interval is used when you want to estimate a population proportion using a sample proportion.
To calculate the one-sample z-interval for estimating a population proportion, you can use the following formula:
Confidence Interval = p ± Z * sqrt((p * (1 - p)) / n)
where:
p is the sample proportion (favorable opinions of Candidate A / total voters in the sample)Z is the critical value corresponding to the desired level of confidence (e.g., 1.96 for a 95% confidence interval)n is the sample size (334 in this case)sqrt represents the square root functionUsing this method, you will calculate a confidence interval that estimates the true proportion of registered voters who have a favorable impression of Candidate A, based on the sample data.
This is the most appropriate method because it focuses on estimating a single population proportion and incorporates the sample data and sample size into the calculation.
Read more about random samples here:
https://brainly.com/question/29444380
#SPJ1
if a random sample of size 555 is selected, what is the probability that the proportion of persons with a retirement account will differ from the population proportion by less than 5% ? round your answer to four decimal places.
The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:
σ = sqrt((p*(1-p))/n)
where n is the sample size.
Substituting the values given in the question, we have:
σ = sqrt((0.5*(1-0.5))/555) = 0.0258
To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:
P(|p_hat - p| < 0.05)
where p_hat is the sample proportion.
We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:
P(|p_hat - p|/σ < 0.05/σ)
P(-0.97 < Z < 0.97)
where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:
P(-0.97 < Z < 0.97) = 0.8327
Rounding to four decimal places, we have:
P(|p_hat - p| < 0.05) = 0.8327
Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
Learn more about probability
https://brainly.com/question/30034780
#SPJ4
The difference of -12 - 45 will be?? postive or negitive or equle
Answer:33
Step-by-step explanation:45-12=33
when researching a population where it is impossible or impractical to compile a list of the elements, which sampling technique is appropriate to use?
When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique
Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.
Learn more about cluster sampling technique:https://brainly.com/question/11003935
#SPJ11