A student watches the tide change, and sees water waves pass the end of the dock
that follow the pattern shown below:
13)
The student counts the waves with a stopwatch, and determines that it takes 8.75
seconds for a single wave to go by. The wave frequency is ----

Answer:

Ocean acidification reduces the amount of carbonate, a key building block in seawater. This makes it more difficult for marine organisms, such as coral and some plankton, to form their shells and skeletons, and existing shells may begin to dissolve.

Answer:

The intake of carbon dioxide (CO2) from the atmosphere causes ocean acidification, which is the continual decline in the pH value of the Earth's oceans. The burning of fossil fuels by humans is the primary cause of ocean acidification. The amount of carbon dioxide absorbed by the ocean grows in lockstep with the amount of carbon dioxide in the atmosphere. This causes a sequence of chemical reactions in the seawater, which has a negative impact on the, however, their rine life that lives beneath the surface. Carbonic acid is formed when carbon dioxide dissolves in seawater (H2CO3). The pH value of the ocean surface is estimated to have decreased from approximately 8.25 to 8.14 between 1751 and 1996, representing a nearly 30% increase in H+ ion concentration in the world's oceans (note that the pH scale is logarithmic, so a change of one pH unit equals a tenfold change in H+ ion concentration). The pH of the ocean in 2020 will be 8.1, according to the National Oceanic and Atmospheric Administration.

Explanation:

Answer:

Caribbean and Latin America Region

Explanation:

Answer:

C. Compression

Explanation:

✧✧✧EMOTIONAL DAMAGE✧✧✧

kleann

Answer:

Gravitational tugs from orbiting planets don't affect the motion of a star. The star, being much larger than the planet, has a much smaller orbit. But it does move slightly. Explain how alien astronomers could deduce the existence of planets in our solar system by observing the Sun's motion.

Answer:

F = q V X B

V is south and B is into the page

The resultant vector is directed to the East

F = 1.6E-19 * 4.5E3 * 5.5E3 N = 3.96 N East

(Note q is negative for an electron producing a force in the opposite direction)

Answer:

orce = rate of change of momentum which is m a if the mass is constant

10 Newtons = change of momentum/0.10 second

so change of momentum = 1 kg m/s

by the way the change in speed would be 1/5 = .2 m/s

Explanation:

If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

As given in the problem If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then we have to find out what the impulse exerted by the force on the object.

P = force × time

  = 10 × 0.1

  = 1  Ns

Thus, If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

To learn more about momentum from here  , refer to the link given below ;

brainly.com/question/17662202

#SPJ5

Since the magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s, the emf induced in the coil is -5.65 V

The induced emf in the coil is given by ε = -NΔΦ/Δt where

Since ε = -NΔΦ/Δt

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

Substituting the values of the variables into the equation, we have

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

ε = -2(38 Wb - (-58 Wb))/(34 s - 0 s)

ε = -2(38 Wb + 58 Wb)/(34 s - 0 s)

ε = -2(96 Wb)/34 s

ε = -192 Wb/34 s

ε = -5.65 Wb/s

ε = -5.65 V

So, the emf induced in the coil is -5.65 V

Learn more about induced emf in coil here:

https://brainly.com/question/13051297

The electrical action generated by a non-electrical source, measured in volts. The emf induced in the coil is -564.7 V.

The electrical action generated by a non-electrical source, measured in volts, is referred to as emf or electromotive force. Devices, such as batteries or generators, generate an emf by converting various sources of energy into electrical energy.

The emf induced in a coil is given by

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

where

ΔΦ is the change in magnetic flux, Δt is the change in time, and N is the number of loops.

Given that the initial magnetic flux is -58 Wb while the final magnetic flux is 38 Wb. Also, the change in time is 0.34 seconds and the number of loops is 2. Therefore, the emf induced can be written as,

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

[tex]\varepsilon = \dfrac{-(2) \times [38-(-58)]}{0.34}\\\\\varepsilon = -564.7\rm\ V[/tex]

Hence, the emf induced in the coil is -564.7 V.

Learn more about EMF:

https://brainly.com/question/15121836

#SPJ4

less than 20 Hz

The frequency of subsonic sound is less than 20 Hz

subsonic sound refers to a sound which has a wave that travels slower than the speed of sound.

Thus subsonic sound < 20 Hz

Answer:

less than 20Hz

Explanation:

Bats can hear below 20Hz ,so they use this to travel in air

After the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

When the two objects collide but do not stick together, the type of collision is elastic collision.

In elastic collision, both momentum and kinetic energy are conserved.

mu₁ + mu₂ = mv₁ + mv₂

5m + 2m = mv₁ + mv₂

m(5 + 2) = m(v₁ + v₂)

7 = v₁ + v₂ -------- (1)

Apply the concept of one direction velocity;

u₁ + v₁ = u₂ + v₂

5 + v₁ = 2 + v₂

v₂ = v₁ + 3 ------ (2)

Solve (1) and (2) together;

7 = v₁ + v₁ + 3

4 = 2v₁

v₁  = 2 m/s

v₂  = 2 + 3 = 5 m/s

Thus, after the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

Learn more about elastic collision here: https://brainly.com/question/7694106

Daryl’s conclusion that the relationship between the frequency and the wavelength of sound waves in air is the result of causation is correct.

This is defined as the relationship between successive events when the first event brings about the other.

The higher frequencies brings about shorter wavelengths which is why it is termed as being  a result of causation.

Read more about Causation here https://brainly.com/question/9583324

Answer ,,a main sequence stars burns through the hydrogen in it's core

Explanation:

When the stars go out

Eventually,reaching the end of its life cycle. At this point, it leaves the main sequence. Stars smaller than a quarter the mass of the sun collapse directly into white dwarfs

Answer:

where is the displacement

[tex]v = \frac{s}{t} [/tex]

The average velocity of the fly between 0 and 15 seconds will be 10 m/sec.Velocity is the time-based component.

The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.

From the given graph it is obsderved that the displacement from 0 to 15 seconds will be 150 m.

[tex]\rm V = \frac{D_2-d_1 }{t_2-t_1} \\\\ V = \frac{150}{15-0} \\\\ V= 10 \ m/sec[/tex]

Hence the average velocity of the fly between 0 and 15 seconds will be 10 m/sec.

To learn more about the average velocity refer to the link;

https://brainly.com/question/862972

#SPJ4

Answer:

seismic wave

Explanation:

Answer:

c. Resin.

Explanation:

Amber is a resin.

Answer:

a thunder

Explanation:

It's because the difference in speed of light and sound

So we hear thunder later

Answer:

C

Explanation:

Therefore, Thunder Follows The Easiest Part. And it is not (A) because Thunder Follows A Lightening Not Vice Versa.

This question involves the concept of the law of conservation of momentum.

The horizontal speed acquired by catching the ball will be "0.223 mph".

According to the law of conservation of momentum applied in horizontal direction:

Total Initial Momentum = Total Final Momentum

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

Therefore,

[tex](0.145\ kg)(100\ mph)+(65\ kg)(0\ mph)=(0.145\ kg)(0\ mph)+(65\ kg)(v_2)\\\\v_2=\frac{14.5\ kg.mph}{65\ kg}\\\\[/tex]

v₂ = 0.223 mph

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396

This is less an answer more like the answers that should be it.

A) 9.9 cm/s

B) 5.6 cm/s

C) 11.8 cm/s

D) 4.2 cm/s

The rocky object orbiting in space is most likely referred to as an asteroid.

This is referred to a rocky object which revolve around the sun and are considered too small to be called a planet.

Asteroids was observed with the use of a telescope and is around 250 km wide thereby making it the most appropriate choice.

Read more about Asteroids here https://brainly.com/question/11996385

Answer:

hello.

Negative acceleration is also called deceleration.

Explanation:

If the velocity of the object does not change with time, it has zero acceleration.

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second.

In this question we have a system formed by three elements, the element AB experiments a pure rotation at constant velocity, the element BD has a general plane motion, which is a combination of rotation and traslation, and the ruff experiments a pure translation.

To determine the linear acceleration of the collar ([tex]a_{D}[/tex]), in inches per square second, we need to determine first all linear and angular velocities ([tex]v_{D}[/tex], [tex]\omega_{BD}[/tex]), in inches per second and radians per second, respectively, and later all linear and angular accelerations ([tex]a_{D}[/tex], [tex]\alpha_{BD}[/tex]), the latter in radians per square second.

By definitions of relative velocity and relative acceleration we build the following two systems of linear equations:

[tex]v_{D} + \omega_{BD}\cdot r_{BD}\cdot \sin \gamma = -\omega_{AB}\cdot r_{AB}\cdot \sin \theta[/tex]   (1)

[tex]\omega_{BD}\cdot r_{BD}\cdot \cos \gamma = -\omega_{AB}\cdot r_{AB}\cdot \cos \theta[/tex]   (2)

[tex]a_{D}+\alpha_{BD}\cdot \sin \gamma = -\omega_{AB}^{2}\cdot r_{AB}\cdot \cos \theta -\alpha_{AB}\cdot r_{AB}\cdot \sin \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \cos \gamma[/tex]   (3)

[tex]-\alpha_{BD}\cdot r_{BD}\cdot \cos \gamma = - \omega_{AB}^{2}\cdot r_{AB}\cdot \sin \theta + \alpha_{AB}\cdot r_{AB}\cdot \cos \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \sin \gamma[/tex]   (4)

If we know that [tex]\theta = 60^{\circ}[/tex], [tex]\gamma = 19.889^{\circ}[/tex], [tex]r_{BD} = 10\,in[/tex], [tex]\omega_{AB} = 16\,\frac{rad}{s}[/tex], [tex]r_{AB} = 3\,in[/tex] and [tex]\alpha_{AB} = 0\,\frac{rad}{s^{2}}[/tex], then the solution of the systems of linear equations are, respectively:

[tex]v_{D}+3.402\cdot \omega_{BD} = -41.569[/tex]   (1)

[tex]9.404\cdot \omega_{BD} = -24[/tex]   (2)

[tex]v_{D} = -32.887\,\frac{in}{s}[/tex], [tex]\omega_{BD} = -2.552\,\frac{rad}{s}[/tex]

[tex]a_{D}+3.402\cdot \alpha_{BD} = -445.242[/tex]   (3)

[tex]-9.404\cdot \alpha_{BD} = -687.264[/tex]   (4)

[tex]a_{D} = -693.867\,\frac{in}{s^{2}}[/tex], [tex]\alpha_{BD} = 73.082\,\frac{rad}{s^{2}}[/tex]

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second. [tex]\blacksquare[/tex]

The statement is incomplete and figure is missing, complete form is introduced below:

Arm AB has a constant angular velocity of 16 radians per second counterclockwise. At the instant when θ = 60°, determine the acceleration of collar D.

To learn more on kinematics, we kindly invite to check this verified question: https://brainly.com/question/27126557

Answer:

TO answer this question i need wave speed

Explanation:

Answer:

d (density) = m / V = (292 - 180) g / 95 cm^3 = 1.18 g / cm^3

(water is 1 gm / cm^3)

For a distant astronomical object (a quasar) is moving away from us at half the speed of light, the speed of the light we receive from this quasar  is mathematically given as c = 3x108 m/s

Generally, the equation for the   is mathematically given as

The speed of light can be said to be measured to be approximately the value c = 3x108 m/s

.

In conclusion, An will not influence  3x108 m/s unless both are inertia and frames refrences where newtons laws are valid, so the speed of light measured from the earth frame is equal to  3x108 m/s

Read more about Speed

https://brainly.com/question/4931057

Answer:

12.5 m/s

Explanation:

By conservation of momentum, we have that:
[tex]\displaystyle m_1v_1 + m_2v_2 = m_1v_1' + m_2v_2'[/tex]

Because the two objects combine after collision, they will have the same velocity:

[tex]\displaystyle m_1v_1 + m_2v_2 = (m_1+m_2)v_f[/tex]

Substitute and solve for final velocity:

[tex]\displaystyle \begin{aligned} (50 \text{ kg})(15\text{ m/s}) + (50\text{ kg})(10\text{ m/s}) & = ((50+50)\text{ kg})v_f \\ \\ v_f & = 12.5\text{ m/s}\end{aligned}[/tex]

In conclusion, the final velocity of the system will be 12.5 m/s.

One source error is deliberate deception and one of its solutions is having a lie scale inserted into the assessment.]

An error is a mistaken or erroneous action. In some contexts, an error is interchangeable with a mistake.

The discrepancy between the calculated value and the correct value is referred to as an "error" in statistics.

When a person is completely aware of what they are doing, they are engaging in deception. They are concealing the truth and making a deliberate decision to tell someone something that is false.

When describing a magic trick, such as a sleight of hand, the term deception can also be used.

When there are repetitive questions that ask the same questions over and over with different formats to check if the responses are constant over time, lie scales are utilized.

Hence one source error is deliberate deception and one of its solutions is having a lie scale inserted into the assessment.

To learn more about the error refer to the link;

https://brainly.com/question/13286220

The particular temperature at which vaporisation occurs is known as the boiling point of liquid. Volume of water increases when it boils at 100° C. 1 cm3 of water at 100 ° C becomes 1760 cm3 of steam at 100 ° C.

Hope it helps!!!!!!!!!!!!!!!!!!!!! ~~~~~~~~~~~~~~~~~~~

ಥ‿ಥ