A study found that the mean amount of time cars spent in​ drive-throughs of a certain​ fast-food restaurant was 137.5 seconds. Assuming​ drive-through times are normally distributed with a standard deviation of 27 ​seconds, complete parts​ below:

Answer:

12,500 is 100%, or 1 in decimal terms. We calculate 5% by multiplying 12500 by 0.05.

This gives us a total of £625

Step-by-step explanation:

Brainliest pls

Answer:

4

Step-by-step explanation:

f(-1) = 2

g(2)= 4

let's bear in mind that on the III Quadrant, sine and cosine are both negative, whilst on the IV Quadrant, sine is negative and cosine is positive, that said

[tex]\cos(\alpha )=\cfrac{\stackrel{adjacent}{3}}{\underset{hypotenuse}{5}}\hspace{5em}\textit{let's find the \underline{opposite side}} \\\\\\ \begin{array}{llll} \textit{using the pythagorean theorem} \\\\ a^2+o^2=c^2\implies o=\sqrt{c^2 - a^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{5}\\ a=\stackrel{adjacent}{3}\\ o=opposite \end{cases} \\\\\\ o=\pm \sqrt{ 5^2 - 3^2} \implies o=\pm \sqrt{ 16 }\implies o=\pm 4\implies \stackrel{IV~Quadrant }{o=-4} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\tan(\beta )=\cfrac{\stackrel{opposite}{4}}{\underset{adjacent}{3}}\implies \tan(\beta )=\cfrac{\stackrel{opposite}{-4}}{\underset{adjacent}{-3}} \\\\[-0.35em] ~\dotfill\\\\ \tan(\alpha + \beta) = \cfrac{\tan(\alpha)+ \tan(\beta)}{1- \tan(\alpha)\tan(\beta)} \\\\\\ \tan(\alpha + \beta)\implies \cfrac{ ~~\frac{-4}{3}~~ + ~~\frac{-4}{-3} ~~ }{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \cfrac{0}{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \text{\LARGE 0}[/tex]

The radius of the circle with given circumference is 13.

What is circumference?

In mathematics, the circumference of any shape determines the path or boundary that surrounds it. In other words, the perimeter, also referred to as the circumference, helps determine how lengthy the outline of a shape is.

We are given that the circumference of a circle is 81.64 miles.

We know that circumference of a circle is given by 2πr.

So, using this we get

⇒ C  = 2πr

⇒ 81.64  = 2 * 3.14 * r

⇒ 81.64  = 6.28 * r

⇒ r  = 13

Hence, the radius of the circle with given circumference is 13.

Learn more about circumference from the given link

https://brainly.com/question/18571680

#SPJ1

The exponential equation represents a growth, and the rate of increase is 9%.

The general exponential equation is written as:

y = A*(1 + r)^x

Where A is the intial value, and r is the rate of growth or decay, depending of the sign of it (positive is growth, negative is decay).

Here we have:

y = 38*(1.09)^x

We can rewrite this as:

y = 38*(1 + 0.09)^x

So we can see that r is positive, thus, we have a growth, and the percentage rate of increase is 100% times r, or:

100%*0.09 = 9%

Learn more about exponential equations at:

https://brainly.com/question/11832081

#SPJ1

Answer:

2 hope that helps

Step-by-step explanation:

Answer:

3x + 4 < 13

2y - 5 > 7

6n - 1 ≤ 23

8m + 2 ≥ 18

4a - 7 < 5a + 2

9b + 3 > 6b + 10

Step-by-step explanation:

I dunno if this is what you're asking for

Answer:

ok.....

x + 2 < 5

|x - 4| > 4

x + 7 [tex]\geq[/tex] 8

-x < -5

x - 5 < 9

5x + 18 > 2

|3x - 1| < 8

The amount of time needed for this capital to triple would be 50 months, the letter "d" being correct. We arrive at this result using simple interest.

Simple interest is a type of financial calculation that is used to calculate the amount of interest on borrowed or invested capital for a given period of time.

In order to find the amount of time required for the principal to be equal to three times the redemption, we have to note that the amount will be equal to three times the principal, using this information in the formula. Calculating, we have:

M = C * (1 + i * t)

3C = C * (1 + 0.04t)

3 = 1 + 0.04t

0.04t = 3 - 1

0.04t = 2

t = 2/0.04

t = 50

Answer:

20.8

Step-by-step explanation:

Let h be the height of the ladder. We know that the distance BC is 8 ft, and the angle of elevation BAC is 69 degrees. Therefore, we have:

tan(69) = h/8

Multiplying both sides by 8, we get:

8*tan(69) = h

Using a calculator, we get:

h ≈ 20.8 ft

Therefore, the height of the top of the ladder from the ground is approximately 20.8 feet.

Problems:

Solve for x: 2x - 5 > 9x + 2

Solve for x: 3x + 2 < 7x - 5

Solve for x: 4x + 3 < 2x - 1

Solve for x: -2x - 4 > -8x + 3

Solve for x: 5x + 1 < 2x + 7

Answers:

x < -0.7

x > 1.75

x < -1

x < 0.875

x < 1.2

Answer:  

Example 1

Solve 3x − 5 ≤ 3 − x.

Solution

We start by adding both sides of the inequality by 5

3x – 5 + 5 ≤ 3 + 5 − x

3x ≤ 8 – x

Then add both sides by x.

3x + x ≤ 8 – x + x

4x ≤ 8

Finally, divide both sides of the inequality by 4 to get;

x ≤ 2

Example 2

Calculate the range of values of y, which satisfies the inequality: y − 4 < 2y + 5.

Solution

Add both sides of the inequality by 4.

y – 4 + 4 < 2y + 5 + 4

y < 2y + 9

Subtract both sides by 2y.

y – 2y < 2y – 2y + 9

Y < 9 Multiply both sides of the inequality by −1 and change the inequality symbol’s direction. y > − 9

Solving linear inequalities with subtraction

Let’s see a few examples below to understand this concept.

Example 3

Solve x + 8 > 5.

Solution

Isolate the variable x by subtracting 8 from both sides of the inequality.

x + 8 – 8 > 5 – 8 => x > −3

Therefore, x > −3.

Example 4

Solve 5x + 10 > 3x + 24.

Solution

Subtract 10 from both sides of the inequality.

5x + 10 – 10 > 3x + 24 – 10

5x > 3x + 14.

Now we subtract both sides of the inequality by 3x.

5x – 3x > 3x – 3x + 14

2x > 14

x > 7

Solving linear inequalities with multiplication

Let’s see a few examples below to understand this concept.

Example 5

Solve x/4 > 5

Solution:

Multiply both sides of an inequality by the denominator of the fraction

4(x/4) > 5 x 4

x > 20

Step-by-step explanation:

Hope this helps :3

Answer:

26° 180 -81 - 73 = 26

Step-by-step explanation:

Answer:

26

Step-by-step explanation:

triangle= 180

81 + 73 = 154

180 - 154= 26

Answer:

260

Step-by-step explanation:

First you find the area of the triangle

1/2×base×height

1/2×20×10

=100

Then you find the area of the rectangle

A=l×b

=20×8

=160

Then you add the area of the triangle with the area of the rectangle

160+100=260

The principle of mathematical induction is a method of proof used in mathematics to prove that a statement is true for all natural numbers.

It is based on the idea that if the statement is true for one number, then it can be used to prove that it is true for the next number. Mathematical induction can be expressed mathematically as follows:

Let P(n) be a statement involving an integer n

Base Case: P(m) is true for some m

Induction Hypothesis: Assume P(k) is true for some k>m.

Induction Step: Show that P(k+1) is true.

Therefore, P(n) is true for all n>m

Learn more about Mathematical induction here:

https://brainly.com/question/30893280

#SPJ1

a) The expected (mean) number of shots that Zlatan Ibrahimović must make to score a goal is 3.11.

b) The standard deviation of the distribution is 2.46.

The expected number or mean (μ) of a distribution is computed as sum resulting from the multiplication of each value of the random variable by its probability and adding the products.

The formula for the mean is given as E(x) = ∑x P(x).

On the other hand, to compute the standard deviation (σ) of a probability distribution, we find each deviation from its expected value, square it, multiply it by its probability, add the products, and take the square root.

No. of shots    Probability    Expected        Squared      Squared Deviation

                       of scoring    No. of shots     Deviation     x Probability

0                         0.02               0                   9.6721            0.193442

1                          0.13                0.13               8.8804           1.154452

2                         0.34               0.68              5.9049          2.007666

3                         0.32               0.96              4.6225          1.4792

4                         0.16                0.64              6.1009          0.976144

5                         0.02               0.1                9.0601            0.181202

6                         0.01               0.6                6.3001            0.063001

The expected (mean)

 number of shots =                3.11                                     6.055107

Standard Deviation = Square root of 6.055107 = 2.46

Learn more about the expected mean and standard deviation at https://brainly.com/question/22247668.

#SPJ1

Answer: top two goes together, middle left goes to bottom right, bottom left goes to middle right

Step-by-step explanation:

Substitute x for an easy number like 2 and solve.

x - 2/3 - 1/2x = 1/2x - 2/3

x - 1/2 - 3/4x = 1/4x- 1/2

1/3x - 3/4 - 2/3x = -1/3x - 3/4

Answer:

x=66 and y=63

Step-by-step explanation:

The middle triangle is isosceles

57+57+x=180

114+x=180

x=66

Left triangle is equilateral (all angles =60)

60+57+?=180

117+?=180

?=63

Right triangle is isosceles

?=y

y=63

Answer:

you need to learn yo stuff

Step-by-step explanation:

bye

The amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is calculated to be approximately 6.58 gallons.

What is unit rate?

A unit rate is the cost for only one of anything. This is expressed as a ratio with a denominator of 1. For instance, if you covered 70 yards in 10 seconds, you did so at an average speed of 7 yards per second. Although both of the ratios—70 yards in 10 seconds and 7 yards in one second—are rates, only the latter is a unit rate.

Assuming the unit rate of 1 gallon per 18.25 minutes, we can convert 2 hours to minutes by multiplying it by 60, which gives us 120 minutes.

So, in 120 minutes, the amount of liquid that can be processed at a unit rate of 1 gallon per 18.25 minutes would be:

(120 minutes) / (18.25 minutes/gallon) = 6.58 gallons

Therefore, the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is found out to be  approximately 6.58 gallons.

To learn more about the unit rate from the given link

https://brainly.com/question/4895463

#SPJ9

The complete question is :

What is the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes?

Answer:

Unfortunately, I cannot see the graph you are referring to since we are communicating through text. However, based on the information given, we can make some general observations.

We know that Natasha received a raise in her hourly rate of pay at some point during the year. Before the raise, she earned some initial hourly rate of pay. Let's call this initial rate of pay "x". Let's also assume that she worked for "h" hours before receiving the raise, and "k" hours after receiving the raise.

We can write an equation to represent the total amount of money she made this year:

Total amount of money = (initial hourly rate of pay x number of hours worked at the initial rate) + (new hourly rate of pay x number of hours worked at the new rate)

Using the variables we defined earlier, we can write:

Total amount of money = (x × h) + ((x + y) × k)

where y is the increase in her hourly rate of pay after the raise.

We also know that she earned a certain amount of money before the raise. Let's call this amount "M". This means that:

M = x × h

Solving for x, we get:

x = M/h

Substituting this expression for x into the first equation, we get:

Total amount of money = (M + yh) + ((M/h + y) × k)

We don't know the values of M, y, h, or k, so we cannot determine the initial hourly rate of pay x or the total amount of money Natasha made this year. However, we have set up an equation that can be used to solve for these values if we have more information.

Answer:

Step-by-step explanation:

modal weight:  the weight that appear most often

4.5 kg  appears 3 times

6-sided polygon:  even though it is an irregular polygon, the interior angles still add up to (6 - 2)180 = 720

therefore, angle f = 720 - 576 = 144      (the sum of a+b+c+d+e is very blurry in the image, it looks like 576--please double check that!)

modal score:  read this right off the graph.  The score with the highest frequency is the modal score:  14   (meaning, 9 contestants got this score)

The wire can be divided into five equal parts, where one portion is one-fifth of the total length and the other four parts are four-fifths of the total length. the measure of the longer part of the wire after cutting is 2 meters.

If the wire was cut in a ratio of 1:4, then the total length of the wire can be divided into 5 parts, where one part is 1/5 of the total length, and four parts are 4/5 of the total length. Let's call the length of one part "x".

So, the total length of the wire is:

 [tex]5x = 2.5[/tex] meters

To find the length of the longer part of the wire, we need to find how many parts are in the longer portion. Since the wire was cut in a 1:4 ratio, the longer portion has four parts.

Therefore, the length of the longer part of the wire is:

[tex]4x = 4/5 \times 2.5 meters = 2 meters[/tex]

Therefore, the measure of the longer part of the wire after cutting is 2 meters.

Learn more about measure here:

https://brainly.com/question/4725561

#SPJ9

Answer:

Step-by-step explanation:

Ici, nous allons réduire la fraction 18/25 aux termes les plus bas et la convertir en un nombre fractionnaire, si nécessaire.

Dans la fraction 18/25, 18 est le numérateur et 25 est le dénominateur.

On commence par trouver le plus grand diviseur commun de 18 et 25, qui est 1. Ensuite, on divise 18 et 25 par le plus grand diviseur commun pour obtenir la plus petite expression, écrite comme suit :

(18 ÷ 1) / (25 ÷ 1)

= 18/25

the profit function is positive, producing 164 units of the new product line would yield a profit of $600.

We should proceed with the product line since it is profitable and we can reasonably expect to meet our break-even quantity.
To find the break-even quantity, we need to set the cost function equal to the revenue function and solve for x:
C(x) = R(x)
55x + 3500 = 80x
25x = 3500
x = 140
Therefore, the break-even quantity is 140 units.
To find the profit function, we subtract the cost function from the revenue function:
P(x) = R(x) - C(x)
P(x) = 80x - (55x + 3500)
P(x) = 25x - 3500
Now we can evaluate the profit function at different values of x to see if producing these products is profitable or not.
If we plug in x = 164, the expected sales quantity, we get:
P(164) = 25(164) - 3500
P(164) = 4100 - 3500
P(164) = 600

Learn more about profit function here:

https://brainly.com/question/16866047

#SPJ1

Answer: The answer should be 20 hours

Step-by-step explanation:

That is when the 2 lines meet up so that is when they are the same difference from Kansas City.

The larger angle of the right triangle is 139 degrees.

A right-angled triangle is a type of triangle that has one of its angles equal to 90 degrees. The other two angles sum up to 90 degrees. The sides that include the right angle are perpendicular and the base of the triangle. The third side is called the hypotenuse, which is the longest side of all three sides.

The three sides of the right triangle are related to each other. This relationship is explained by Pythagoras theorem

In a right triangle, one of the angles is 90 degrees. Let x be the measure of the other acute angle. Then we have:

sin x = cos (90° - x)

We can use this identity to rewrite the given equation as:

sin (9x - 4)° = sin (90° - (10x - 1)°)

Using the identity sin (90° - θ) = cos θ, we can simplify this equation to:

sin (9x - 4)° = cos (10x - 1)°

sin (9x - 4)° = sin ((90°) - (10x - 1)°)

sin (9x - 4)° = sin (10x - 91)°

Since sin θ = sin (180° - θ), we have:

9x - 4 = 180° - (10x - 91)°

9x - 4 = 271° - 10x

Simplifying and solving for x, we get:

19x = 275

x = 275/19

Now, the larger angle of the right triangle is either 9x - 4 or 10x - 1, depending on which is larger. We can calculate both angles and compare them:

9x - 4 = 9(275/19) - 4 = 121°

10x - 1 = 10(275/19) - 1 = 139°

Therefore, the larger angle of the right triangle is 139 degrees.

To know more about right triangle visit:

brainly.com/question/6322314

#SPJ1

Answer:

To solve the linear programming problem, we need to first graph the feasible region determined by the constraints, and then evaluate the objective function at each corner point of the feasible region to find the maximum value of z.

Plotting the lines corresponding to the inequalities, we get:

Graph of the feasible region:

The feasible region is the shaded polygon in the graph. We can see that the vertices of the feasible region are (2, 9), (2, 12), (4, 7), and (8, 2).

Next, we evaluate the objective function at each of these vertices to find the maximum value of z.

At (2, 9): z = 7x + 2y = 7(2) + 2(9) = 23

At (2, 12): z = 7x + 2y = 7(2) + 2(12) = 31

At (4, 7): z = 7x + 2y = 7(4) + 2(7) = 35

At (8, 2): z = 7x + 2y = 7(8) + 2(2) = 58

Therefore, the maximum value of z is 58, which occurs at the point (8, 2).

Hence, the answer is: the maximum value of z is 58.

Answer:

x = 63 , y = 90

Step-by-step explanation:

assuming DF is the diameter of the semicircle , then

∠ DEF = y = 90° ( angle inh a semicircle )

then

x + y + 27° = 180° ( angle sum of a triangle )

x + 90 + 27 = 180

x + 117 = 180 ( subtract 117 from both sides )

x = 63

The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

What is a piecewise function ?

A piecewise function is a function that is defined by different equations on different parts of its domain. The graph of a piecewise function consists of several distinct parts, each corresponding to a different equation.

The graph shown is an example of a piecewise function. The function is defined using different equations on different intervals of the domain.

On the interval from negative infinity to negative 2, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

On the interval from negative 2 to 2, the function is defined by the equation y = -x. This means that the value of the function is equal to the negative of x on this interval.

On the interval from 2 to positive infinity, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

At the point x = -2, the function experiences a discontinuity, because the two equations that define it have different values at this point. The function is not differentiable at this point, because it does not have a well-defined tangent line.

The domain of the function is the set of all real numbers, because there are no restrictions on the values of x that are allowed.

Therefore, The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

To learn more about Piecewise function from given link.

https://brainly.com/question/24031122

#SPJ1