An plane covers 50 miles in 1/5 of an hour. How many miles can the plane cover in 5 hours

There are 25 feet in 300.0 inches.

Conversion is a numerical quantity that enables you to convert one unit to another. There are various units for measurements such as length, weight, mass, and so on.

The conversion factor between inches and feet is important to understand when performing this type of calculation. As I mentioned earlier, there are 12 inches in one foot, which can be expressed as:

1 foot = 12 inches

This means that to convert a measurement in inches to feet, we need to divide the number of inches by 12.

300.0/12 = 25

Therefore, 300.0 inches is equivalent to 25 feet.

To know more about conversion refer here:

https://brainly.com/question/3477680

#SPJ11

answer: 10

step by step explanation:

this is not a textbook way but

4:5 means 4/5 and we know that the numbers will be equal to this number so we can multiply the number 4/5*2/2 so we will get 8/10

8/10=4/5

and 8*10=80

so 1st no. is 8 and 2nd is 10

10>8

Answer:

greater number is 10

Step-by-step explanation:

the ratio of the 2 numbers = 4 : 5 = 4x : 5x ( x is a multiplier )

their product is 80 , that is

4x × 5x = 80

20x² = 80 ( divide both sides by 20 )

x² = 4 ( take square root of both sides )

x = [tex]\sqrt{4}[/tex] = 2

then greater number = 5x = 5 × 2 = 10

Answer: 81 ham subs

Step-by-step explanation:

4 times 9 is 36. That means you have to multiply 9 by 9, to get 81 ham subs. The ratio is 81:36. :)

The probability that by the time the sum has been even three times, the sum has already been 7 twice is 1/36.

This is because the total number of possible combinations of two dice is 36, and only one combination, (3,4), has the sum of 7 and is also an even number.

Suppose you roll a pair of fair dice repeatedly : https://brainly.com/question/31079082

#SPJ11

Answer:

The volume of a sphere is given by the formula:

V = (4/3)πr^3

where r is the radius of the sphere.

Since the diameter of Casper's balloon is 6 inches, the radius is 3 inches. Therefore, the volume of Casper's balloon is:

V1 = (4/3)π(3 inches)^3 = 113.1 cubic inches (approx.)

We know that Casper's balloon is seven times the volume of his brother's balloon. Let's call the volume of his brother's balloon V2. We can set up an equation:

V1 = 7V2

Substituting the value of V1, we get:

113.1 cubic inches = 7V2

Dividing both sides by 7, we get:

V2 = 16.2 cubic inches (approx.)

Therefore, the approximate volume of Casper's brother's balloon is 16.2 cubic inches.

Let's denote the width and length of the pool by “w” and “l” respectively. Then, the width of the pool and deck combined would be:So the equation that represents the total area of the pool and deck as binomials is [tex]: A = 2(L + 8)(2L + 8)[/tex]

Let's start by drawing a diagram of the rectangular pool and the surrounding deck:

 ___________  Pool Length (L)

|           |

|           |

|           |

|           |

W|___________|

| Deck Width|

|    = 4ft  |

|___________|

We know that the width of the pool (W) is twice its length (L), so we can write:

[tex]W = 2L[/tex]

We also know that the deck is 4ft wide on each side, so the total width of the pool and deck is:

[tex]W_total = W + 8 = 2L + 8[/tex]

And the total length of the pool and deck is:

[tex]L_total = L + 8[/tex]

The total area of the pool and deck can be found by multiplying the total width by the total length:

[tex]A = W_total \times L_total[/tex]

Substituting our expressions for W_total and L_total, we get:

[tex]A = (2L + 8) * (L + 8)[/tex]

Expanding the brackets, we get:

[tex]A = 2L^2 + 24L + 64[/tex]

So the equation that represents the total area of the pool and deck is:

2L^2 + 24L + 64

To represent the sides of the shape as binomials, we can factor out a common factor of 2 from the quadratic expression:

[tex]A = 2(L^2 + 12L + 32)[/tex]

Then we can write the sides of the shape as:

[tex]L + 8[/tex]   and [tex]2L + 8[/tex]

Therefore, So the equation that represents the total area of the pool and deck as binomials is: [tex]A = 2(L + 8)(2L + 8)[/tex]

Learn more about binomials here:

https://brainly.com/question/13870395

#SPJ1

The magnitude of the resultant force is given by:

|F| = [tex]sqrt((-7)^2 + 0^2) N|F| = 7 N[/tex]The direction of the resultant force is given by:

[tex]θ = tan^-1(0/-7)θ = tan^-1(0) = 0[/tex]

Therefore, the magnitude of the resultant force is 7 N, and its direction is along the negative x-axis.

1. Cartesian vector expression for five forcesThe five forces acting along the edges of a pentagon plate ABC are shown below:Force acting on AB = (6i + 6j) NForce acting on BC = (8i + 4j) NForce acting on CD = (-5i + 10j) NForce acting on DE = (-10i - 8j) NForce acting on EA = (4i - 12j) N2.

Cartesian vector expression of the resultant force of these five forcesThe resultant force acting on the pentagon plate ABC can be determined by finding the vector sum of the five forces. The cartesian vector expression of the resultant force can be found as follows:[tex]F = F1 + F2 + F3 + F4 + F5F = (6i + 6j) N + (8i + 4j) N + (-5i + 10j) N + (-10i - 8j) N + (4i - 12j) N= (-7i + 0j) N[/tex]

Therefore, the cartesian vector expression of the resultant force is (-7i + 0j) N.3. Magnitude and direction of the resultant forceThe magnitude and direction of the resultant force can be determined by using the cartesian vector expression of the resultant force obtained in the previous step.

for such more questions on Cartesian vector

https://brainly.com/question/29273438

#SPJ11

The area of the given shape is 22 square tiles. The given shape consists of two rectangles and a square.

To find the area of the shape, we need to find the area of each of these three shapes and then add them up.

First, we can see that the length of the longer rectangle is 6 tiles and the width is 2 tiles. Therefore, the area of this rectangle is 6 × 2 = 12 tiles.

Next, the length of the shorter rectangle is 3 tiles and the width is 2 tiles. Thus, the area of this rectangle is 3 × 2 = 6 tiles.

Finally, the square has a side length of 2 tiles, so its area is 2 × 2 = 4 tiles.

Adding up the areas of the three shapes, we get 12 + 6 + 4 = 22 tiles.

Find out more about the area at

brainly.com/question/26473539

#SPJ4

Answer:

A

Step-by-step explanation:

Suppose that IQ scores have a bell-shaped distribution with a mean of 96 and a standard deviation of 17. Using the empirical rule, 15.87 percentage of IQ scores are less than 79.

The empirical rule says that for a normal distribution, almost all of the data will fall within three standard deviations of the mean.

Specifically:
Approximately 68% of the data falls within one standard deviation of the mean.
Approximately 95% of the data falls within two standard deviations of the mean.
Almost all (99.7%) of the data falls within three standard deviations of the mean.
Given that the mean of IQ scores is 96 and the standard deviation is 17.

Hence the Z score can be calculated as
z=(x−μ)/σ=(79−96)/17=−1
From the standard normal distribution table, the percentage of the data that is less than z = -1 is 15.87%.
Hence the percentage of IQ scores that are less than 79 is approximately 15.87%.

For similar question on empirical rule

https://brainly.com/question/20875827

#SPJ11

In Circuit B, the ammeter is connected in series with resistor R1 and the voltmeter is connected in parallel with resistor R2.

Therefore, the circuit is correctly setup to measure the desired quantities.

The correct circuit for measuring the current through resistor R1 and the potential difference across R2 is Circuit B. Circuit B is formatted with an ammeter measuring the current through R1 and a voltmeter measuring the potential difference across R2.

An ammeter is used to measure current and should be connected in series with the component it is measuring; whereas a voltmeter is used to measure potential difference and should be connected in parallel with the component it is measuring.

for such more questions on correct circuit

https://brainly.com/question/16511109

#SPJ11

The risk of owning a home in Randolph County based on the given sample can be calculated as:

Risk of owning a home = Number of residents who own a home / Total number of residents in the sample

Risk of owning a home = 59 / 90

Therefore, the risk of owning a home in Randolph County based on the given sample is approximately 0.656 or 65.6%.

The total cost of the laptop with the sales tax included is 938.18.

The total cost of the laptop with the sales tax included is the sum of the original price and the tax amount. The formula to calculate the total cost is given below:

Total Cost = Original Price + (Original Price * Sales Tax Rate)

In this case, the Original Price is 882.99 and the Sales Tax Rate is 6.25%. Therefore, the Total Cost of the laptop with the sales tax included is calculated as follows:

Total Cost = 882.99 + (882.99 * 0.0625)

Total Cost = 882.99 + 55.19

Total Cost = 938.18

Rounding to the nearest cent, the total cost of the laptop with the sales tax included is 938.18.

Learn more about total cost here:

https://brainly.com/question/6506894

#SPJ4

The sum to infinity of the series 1 + 2x + 3x² + 4x³ + ... is 1/[(1-x)²] when |x| < 1.

The formula for the sum of an infinite geometric series when |x| < 1 is given as:

S = a/(1-r)

We have a = 1 and r = x/1.

S = 1/(1-x) + 2x/(1-x)² + 3x²/(1-x)³ + 4x³/(1-x)⁴ + ...

we multiply both sides of this equation by (1-x)²,

S(1-x)² = (1-x) + 2x + 3x²(1-x) + 4x³(1-x)² + ...

S(1-x)² = 1 + x + x² + x³ + ...    eqn (1)

Using the formula for the sum of an infinite geometric series when |x| < 1, we have:

1/(1-x) = 1 + x + x² + x³ + ...

Substituting this into equation (1), we get:

S(1-x)² = 1/(1-x)

S = 1/[(1-x)²]

In conclusion, the sum to infinity of the series 1 + 2x + 3x² + 4x³ + ... is 1/[(1-x)²] when |x| < 1

Learn more about geometric series at: https://brainly.com/question/28188245

#SPJ1

On his journey to his room, Eugene first found a few pieces of paper before discovering three more. Let's assume that he began with x bits of paper. Eugene started with  [tex]3[/tex] pieces of paper.

Eugene started with some pieces of paper, and then he found 3 more on his way to his room. So, let's say he started with x pieces of paper.

After finding the 3 more pieces, he had a total of   [tex]x + 3[/tex] pieces of paper.

He then cut each piece of paper in half, which means he doubled the number of pieces of paper. So, he ended up with  [tex]2 \times (x + 3) = 2x + 6[/tex]  half-pieces of paper.

We're given that he had 12 half-pieces of paper in the end, so we can set up the equation:

[tex]2x + 6 = 12[/tex]

Solving for x, we get:

[tex]2x = 6[/tex]

[tex]x = 3[/tex]

Therefore, Eugene started with 3 pieces of paper.

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ9

The tank contains 1050 milliliters of water when full or 1.05 liters.

To calculate the volume of the tank in milliliters, we multiply the length (15 cm), width (7 cm), and height (10 cm) together:

15 cm x 7 cm x 10 cm = 1050 cm³

Since 1 milliliter equals 1 cubic centimeter (cm^3), we know that the tank can hold 1050 milliliters of water.

To convert milliliters to liters, we can divide the volume in milliliters by 1000:

1050 mL ÷ 1000 = 1.05 L

Therefore, when full, the tank can hold 1050 milliliters of water or 1.05 liters.

Learn more about the Volume of a Rectangle :

https://brainly.com/question/28123312

#SPJ4

Answer:

C 9:8

Step-by-step explanation:

total students = 36

5+4=9

5:4 = 20:16

20-2=18

ratio for monday = 18:16

=9:8

When a person standing in neutral flexes their right shoulder so that their arm is horizontal with the ground, the center of gravity (mass) will shift towards the left side of the body.

Explanation:

The point at which the weight of a body or an object is concentrated, that is, the point at which the mass of the body or the object is focused is known as the center of gravity. The center of gravity (CG) is the point where the weight of the body is supposed to act, which is the point about which the body remains in balance. The body's center of gravity is important because it affects its balance and stability

                             .When a person is standing in a neutral position, the center of gravity is in the midline of the body. When the person flexes their right shoulder and holds their arm horizontally, the center of gravity will shift towards the left side of the body. This is because the weight of the arm is now being supported by the left side of the body. The shift in the center of gravity will cause the person to adjust their posture to maintain balance and stability.

To know more about center of gravity:

https://brainly.com/question/17409320

#SPJ11

There can be any angles  like vertical, linear pair, supplemenatry which can be shown in the following figure.

(a) One pair of vertical angles:

Vertical angles are formed by the intersection of two lines. They are opposite to each other and are congruent. For example, in the following diagram, ∠1 and ∠6 are a pair of vertical angles, and ∠3 and ∠8 are another pair of vertical angles.

b) one pair of angles that form a linear pair:

A linear pair is formed by  pair of adjacent angles whose non-adjacent sides form a line.

In the figure the linear pair will be ∠4 and ∠8.Beacause they are adjacent angles whose non adjacent sides form a line.

c)one pair of angles that are supplementary:

Two are said to be supplementary if they add up to be 180 degrees.

So in the figure ∠4 and ∠8 can be supplementary and also ∠1 and ∠5 can be supplementary.

To know more about angles visit:

https://brainly.com/question/28451077

#SPJ1

The required medians of the triangle intersect at the point [tex]\left(4,\frac{10}{3}\right)$[/tex].

The medians of a triangle intersect at a point known as the centroid. To find the centroid of a triangle, we need to find the average of the x-coordinates and the average of the y-coordinates of its vertices.

Let the vertices of the triangle be A(0,0), B(5,0), and C(7,5). Then the midpoint of AB is

[tex]\left(\frac{0+5}{2},\frac{0+0}{2}\right) = (2.5,0)$[/tex],

the midpoint of BC is [tex]\left(\frac{5+7}{2},\frac{0+5}{2}\right) = (6,2.5)$[/tex], and the midpoint of CA is

[tex]\left(\frac{0+7}{2},\frac{0+5}{2}\right) = (3.5,2.5)$[/tex]

Therefore, the centroid of the triangle is:

[tex]$\begin{align*}\left(\frac{0+5+7}{3},\frac{0+5+5}{3}\right) &= \left(\frac{12}{3},\frac{10}{3}\right) \&= \left(4,\frac{10}{3}\right)\end{align*}[/tex]

So the medians of the triangle intersect at the point [tex]\left(4,\frac{10}{3}\right)$[/tex].

To know more about centroid visit:

brainly.com/question/10708357

#SPJ1

Answer:

4,320

Step-by-step explanation:

answer is 4,320

9x2x3x8x2x5

Answer:

66 km²

Step-by-step explanation:

To solve this, you should find the area of the rectangle as if it were complete and then subtract the area of the missing section.

Step one: Finding the area of the big rectangle

A =  length x width

A = 9 x 8

A = 72 km²

Step two: Find the area of the smaller rectangle

A = 2 x 3 = 6 km²

Step three: Subtract the area of the small rectangle from the area of the big rectangle

72 - 6 = 66

Hope has 6 nickels (x) and 10 quarters (x + 4).

How many of each coin Hope has if she has 4 more quarters than nickels and they have a combined value of 280 cents. To solve this problem, we can use algebraic equations.

Let's assume the number of nickels Hope has is x. Then, the number of quarters she has would be x + 4.

Now, we need to find the total value of the coins. Each nickel is worth 5 cents, so the total value of nickels is 5x cents. Similarly, each quarter is worth 25 cents, so the total value of quarters is 25(x + 4) cents. The combined value of the coins is 280 cents, so we can set up an equation:

5x + 25(x + 4) = 280

Simplify and solve for x:

5x + 25x + 100 = 280
30x = 180
x = 6

Therefore, Hope has 6 nickels (x) and 10 quarters (x + 4).

To learn more about algebraic equations :

https://brainly.com/question/24875240

#SPJ11

the %Cr in the complex is 26.294%.

To determine the % Cr in the chromium-complex Legna synthesized, she massed out a 1.0240 g sample of the Cr complex. She dissolved the sample in a volumetric flask and made 100.0 mL of solution. From the standard curve of Absorbance versus concentration Legna obtained [Cr3+]=0.03933 M. Calculate the %Cr in the complex.

To determine the % Cr in the chromium-complex synthesized by Legna, we can use the following formula:% Cr = (mass of Cr/mass of sample) x 100We have the mass of the sample, which is 1.0240 g. We need to find the mass of Cr in the sample. To do this, we need to find the number of moles of Cr in the solution, and then use the molar mass of Cr to convert this to mass.

The concentration of Cr3+ in the solution is given as 0.03933 M. We know that the complex is made up of Cr and some other ligands, and the concentration of Cr3+ is not the same as the concentration of Cr in the complex. To find the concentration of Cr in the complex, we need to use the formula:[Cr] = [Cr3+] x (1/x), where x is the number of moles of Cr3+ in the complex.

Let's assume that there is one mole of Cr3+ in the complex, then x = 1. If there are n moles of Cr3+ in the complex, then x = n. We can find x by using the formula:x = (mass of sample/Mr of Cr3+) x [Cr3+]/volume of solutionWe know that the mass of the sample is 1.0240 g, and the volume of the solution is 100.0 mL = 0.1000 L. The molar mass of Cr3+ is 52.00 g/mol. Substituting these values into the formula, we get:x = (1.0240/52.00) x 0.03933/0.1000x = 0.000761 moles of Cr3+ in the complex

Now we can use the formula [Cr] = [Cr3+] x (1/x) to find the concentration of Cr in the complex:[Cr] = 0.03933/0.000761[Cr] = 51.69 M

Finally, we can use the formula:% Cr = (mass of Cr/mass of sample) x 100The molar mass of Cr is 52.00 g/mol. The mass of Cr in the complex is 51.69 x 52.00 = 2689.88 g/mol. Substituting this value and the mass of the sample (1.0240 g) into the formula, we get:% Cr = (2689.88/1.0240) x 100% Cr = 262944.53% Cr = 26.294%

for more questions on concentration

https://brainly.com/question/14469428

Answer:

Commutative property

The Commutative property is most simply shown with: a x b = b x a. In multiplication, the values can shift or "commute" in any order

Siona bought 7 shirts and 3 pairs of shorts when she spent a total of $36.50. The problem can be solved using a system of equations.

Let's use a system of equations to solve this problem:

Let x be the number of shirts that Siona bought, and y be the number of pairs of shorts that she bought. Then we have:

Equation 1: x + y = 10 (Siona bought 10 outfits in total)

Equation 2: 3.50x + 4.00y = 36.50 (The total cost of the outfits is $36.50)

To solve for x and y, we can use substitution or elimination. Let's use substitution:

From Equation 1, we can solve for x in terms of y:

x = 10 - y

Substitute this expression for x into Equation 2:

3.50(10 - y) + 4.00y = 36.50

Simplify and solve for y:

35 - 3.50y + 4.00y = 36.50

0.50y = 1.50

y = 3

Now we can substitute y = 3 back into Equation 1 to solve for x:

x + 3 = 10

x = 7

Therefore, Siona bought 7 shirts and 3 pairs of shorts when she spent a total of $36.50.

Learn more about algebraic equations here: brainly.com/question/953809

#SPJ4

The answer of the given question based on the greatest value is One such number is 3,043,728.

A number system is a system of representing and expressing numbers in a clear, concise, and organized way. The most commonly used number system is the decimal system, which is based on the numbers 0 through 9. However, there are many other number systems, including binary, octal, hexadecimal, and more.

Each number system has a set of rules and conventions for representing numbers. For example, in the decimal system, each digit can represent a value from 0 to 9, and the position of each digit determines its value.

The digit 3 in 143,728 has a value of 3 x 1000 = 3000. To find a number in which the digit 3 has a value that is 10 times as great as this, we need to find a number in which the digit 3 has a value of 10 x 3000 = 30,000.

One such number is 3,043,728. In this number, the digit 3 appears in the hundred thousands place, which means its value is 3 x 100,000 = 300,000. This is indeed 10 times as great as the value of the digit 3 in 143,728.

To know more about Decimal system visit:

https://brainly.com/question/28222265

#SPJ9

The number 137 has the same relationship to the number 143 as the numbers 398,389,392, which have a digit 3 that is 10 times greater than the number 137.

A number's face value is the digit itself, while its place value is determined by its placement.

In order to answer the question, we must determine which of the following integers has a value for the digit 3 that is 10 times greater:

If we pay close attention, we can see that the number 137 has a third digit in its tens place while the number 143 has a third digit in its unit place. Additionally, there are 398,389,392, which has a digit 3 and is ten times bigger than the number 137.

These numbers will be written as follows if we now express their location and value in words:

143 = 1 × 100 + 4 × 10 + 3 × 1.

137 = 1 × 100 + 3 × 10 + 7 × 1.

To know more about integers, visit:

https://brainly.com/question/929808

#SPJ9

The complete question is:

In which number does the digit 3 have a value that is 10 times as great as the value of the digit 3 in 143,728? 137,982 142,398 292,389 392,097.

The set of numbers that are possible values for x in the inequality x < -3 is: {-9, -7, -5}. (Option 2)

To find the possible values of x that satisfy the inequality x < -3, we need to look for numbers that are less than -3. Among the given sets of numbers, only {-9, -7, -5} contains numbers that are less than -3, so this is the set of possible values for x.

{-33, -22, -11} are all greater than -3, so they are not possible values for x in the given inequality.

{5, 7, 9} and {-5, 0, 5} are also greater than -3, so they are not possible values for x in the given inequality.

Learn more about Inequality:

https://brainly.com/question/25275758

#SPJ4

Complete Question:

Select all the sets of numbers that are possible values for x in the inequality, x<-3.

Answer:

24.13

Step-by-step explanation:

Length of the Sara's rope of 2 1/2 meter in centimeter is 25 centimeters.

To convert 2 1/2 meters to centimeters, we can use the conversion factor 1 meter = 100 centimeters. This means that:

2.5 meters = 2.5 x 100 centimeters

= 250 centimeters

Therefore, the length of the rope is 250 centimeters. It's important to understand and be able to convert between different units of measurement, as this is a common task in many fields such as science, engineering, and finance. For example, in science, it's important to be able to convert between different units of length, mass, and volume when making measurements or analyzing data. Similarly, in finance, it's common to convert between different currencies or units of time when dealing with investments or loans. Being able to make these conversions accurately is essential to avoid errors or misunderstandings. In this case, converting the length of the rope from meters to centimeters allows us to work with a more convenient unit for the task at hand, which is hanging a swing for Sara's sister.

To learn more about conversion factor click here

brainly.com/question/28770698

#SPJ4