as lactic acid accumulates, which compensatory mechanism is initially triggered to maintain acid-base balance?

The unit of rate constant for this reaction is 1 / (s M⁴).

The rate of the reaction can be expressed as:

rate = k[A]²[B]³

where k is the rate constant and x and y are the orders of reaction with respect to A and B, respectively.

We can use the given information to determine the values of x and y.

When [A] is doubled, the rate increases by a factor of 4. This means:

(rate when [A] is doubled) / (rate when [A] is not doubled) = 4

[(k[2A]^x[B]^y) / (k[A]^x[B]^y)] = 4

2^x = 4

x = 2

Similarly, when [B] is tripled, the rate increases by a factor of 27. This means:

(rate when [B] is tripled) / (rate when [B] is not tripled) = 27

[(k[A]^2[3B]^y) / (k[A]^2[B]^y)] = 27

3^y = 27

y = 3

Substituting the values of x and y in the rate equation,

rate = k[A]²[B]³

The unit of rate constant can be determined as follows:

unit of rate = M/s

unit of [A] = M

unit of [B] = M

unit of rate constant = unit of rate / (unit of [A]² unit of [B]³)

Substituting the units.

unit of rate constant = (M/s) / (M² M³) = 1 / (s M⁴)

To know more about reaction, here

brainly.com/question/17101840

#SPJ4

The grams of N2 are required to completely react with 3.03 grams of H2 for the following balanced chemical equation is 14 g.

We may calculate the number of moles of H2 that will be used by dividing the amount of H2 that will be utilised by its molar mass. We may multiply that number by the molar mass of N2 to get how many grammes we should use. We can divide that mole quantity by 3 to determine how many moles of N2 the reaction will consume.

In the reaction 1 mole of N2 react with  3 mole of H2 and give 2 mole of NH3

mass of H2 = 3.03g

No of moles of H2 = 3.03g/2 gmol-1

         = 1.51 mole

1.51 mole of H2 require N2 = (1/3)× 1.51 moles  

        = 0.50 mole N2

molar mass of N2  =28g/mol

Mass of N2 require   = 0.50mole ×28g/mol

    = 14g

Mass of N2 require = 14g.

Learn more about Number of grams:

https://brainly.com/question/28902645

#SPJ4

The answer is C. 14.0 grams of N2 are required to completely react with 3.03 grams of H2.

The balanced chemical equation is:

N2 + 3H2 -> 2NH3

From the equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3.

To find out how many grams of N2 are required to react with 3.03 grams of H2, we first need to convert 3.03 grams of H2 to moles:

moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 3.03 / 2.016
moles of H2 = 1.505

Now, we can use the mole ratio from the balanced equation to find out how many moles of N2 are required to react with 1.505 moles of H2:

moles of N2 = (1.505 mol H2) / (3 mol H2/1 mol N2)
moles of N2 = 0.5017

Finally, we can convert moles of N2 to grams of N2:

mass of N2 = moles of N2 x molar mass of N2
mass of N2 = 0.5017 x 28.02
mass of N2 = 14.04

To learn more about balanced chemical equation click here

brainly.com/question/28294176

#SPJ11

The most important interaction is between the ions and the water molecules. There are also electrostatic interactions between the ions and the water molecules in aqueous salt solution.

In an aqueous salt solution, there are several interactions at work to promote hydration of ions. The most important interaction is between the ions and the water molecules. When the salt is dissolved in water, the water molecules surround the ions, forming hydration shells. These shells help to stabilize the ions and prevent them from coming into contact with each other.

The strength of the hydration interaction between an ion and a water molecule depends on the charge and size of the ion. Small ions with high charges, such as Na+ and Mg2+, have a strong interaction with water molecules because they can form more intimate contacts with water molecules. On the other hand, large ions with low charges, such as Cl- and SO42-, have weaker hydration interactions because they cannot form as many intimate contacts with water molecules.

In addition to the hydration interaction, there are also electrostatic interactions between the ions and the water molecules. These interactions occur because the ions have charges, which can interact with the partial charges on the water molecules. The strength of the electrostatic interaction depends on the charge of the ion and the distance between the ion and the water molecule.

Overall, the hydration of ions in an aqueous salt solution is a complex process that involves both hydration and electrostatic interactions. These interactions are crucial for stabilizing the ions in solution and preventing them from coming into contact with each other.

Learn more about aqueous salt solution here:

https://brainly.com/question/9947161

#SPJ11

The hydration of ions in an aqueous salt solution is promoted through ion-dipole interactions, hydrogen bonding, and electrostatic forces. These interactions help to stabilize the hydrated ions in the solution.

The hydration of ions in an aqueous salt solution involves several interactions to promote hydration. These interactions include:

1. Ion-dipole interactions: These are the attractive forces between the charged ions (cations and anions) of the dissolved salt and the polar water molecules. The positive end (hydrogen atoms) of water molecules surround the negative ions, while the negative end (oxygen atom) of water molecules surround the positive ions.

2. Hydrogen bonding: This is a specific type of dipole-dipole interaction that occurs between the hydrogen atom of a polar molecule (such as water) and an electronegative atom (like oxygen). In an aqueous salt solution, hydrogen bonding can occur between water molecules surrounding the ions.

3. Electrostatic forces: These forces occur between charged particles and help to stabilize the hydration shell around the dissolved ions.

To know more about Intermolecular Forces:

https://brainly.com/question/30897286

#SPJ11

2NaCl --> 2Na + Cl2 but I have never seen something this reaction happening

Answer:

91

Explanation:

ok

(a) Balanced net ionic equation: Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s); spectator ions: 2NH₄⁺(aq) and 3SO₄²⁻(aq).

(b) Balanced net ionic equation: Ag+(aq) + SO₄²⁻(aq) → Ag₂SO₄(s); spectator ions: K⁺(aq) and NO₃⁻(aq).

(c) Balanced net ionic equation: Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s); spectator ions: 2K⁺(aq) and 2NO₃⁻(aq).

(a) To write the balanced net ionic equation for the reaction between Cr₂(SO₄)₃ and (NH₄)₂CO₃, we first need to write the complete ionic equation:

Then, we eliminate the spectator ions (NH₄⁺ and SO₄²⁻) to get the net ionic equation:

(b) For the reaction between AgNO₃ and K₂SO₄, the complete ionic equation is:

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

(c) Finally, for the reaction between Pb(NO₃)₂ and KOH, the complete ionic equation is:

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

To learn more about Balanced net ionic equations, here

https://brainly.com/question/15467502

#SPJ4

The concentration of the H₂SO₄ solution is approximately 0.0541 M.

To calculate the concentration of the H₂SO₄ solution, you can use the concept of equivalence in the neutralization reaction:

H₂SO₄ (aq) + 2 NaOH (aq) → Na₂SO₄ (aq) + 2 H₂O (l)

Using the given information, we can start by finding the moles of NaOH:

moles of NaOH = volume (L) × concentration (M) = 0.02044 L × 0.1323 M = 0.00270492 moles

Since the stoichiometry of the reaction is 1:2 (H₂SO₄:NaOH), the moles of H₂SO₄ can be calculated as follows:

moles of H₂SO₄ = 0.00270492 moles NaOH × (1 mole H₂SO₄ / 2 moles NaOH) = 0.00135246 moles

Finally, we can find the concentration of the H₂SO₄ solution:

concentration of H₂SO₄ (M) = moles of H₂SO₄ / volume (L) = 0.00135246 moles / 0.02500 L = 0.0540984 M

Therefore, the concentration of the H₂SO₄ solution is approximately 0.0541 M.

Visit here to learn more about stoichiometry  : https://brainly.com/question/30215297
#SPJ11

The correct option is

In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response 

because endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.

An endothermic response may be a chemical response that retains warmth from the environment, which implies that the vitality of the framework increments.

This increment in vitality is utilized to break the bonds between the particles or atoms within the reactants, and the items are shaped from the modification of these iotas or atoms into unused bonds.

As a result, the whole vitality of the framework at the conclusion of the response is more noteworthy than the full vitality at the start of the response. This increment in vitality is ordinarily watched as an increment within the temperature of the framework or its environment. 

In an endothermic response, the whole vitality at the beginning of the response is less than the overall vitality at the end of the response

.

Usually, endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.

As a result, the entire vitality of the framework at the conclusion of the response is greater than the full energy at the start of the response. Subsequently,

The proper reply is "In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response ".

To know more about endothermic reactions refer to this :

https://brainly.com/question/1160007

#SPJ4

The most important use of an element's atomic number is that it determines the identity of an element. From a neutral atom's atomic number, we can also determine the number of electrons in that atom.

The most important use of an element's atomic number is that it determines the element's unique identity and its position on the periodic table. The atomic number is equal to the number of protons in the nucleus of an atom, which also determines the number of electrons in a neutral atom.

From a neutral atom's atomic number, we can also determine the element's symbol, its electron configuration, and its properties such as its atomic mass and the number of isotopes it has. Additionally, the atomic number can provide information about the element's reactivity and its ability to bond with other elements to form compounds. Overall, the atomic number is a fundamental characteristic of an element that is used in many different areas of chemistry and physics.

Learn more about a neutral atom's atomic number at https://brainly.com/question/7027481

#SPJ11

The most important use of an element's atomic number is that it determines the element's unique identity and properties.

The atomic number also tells us the number of protons in the nucleus of an atom, which in turn determines the number of electrons in the neutral atom. Additionally, the atomic number can give us information about the element's electron configuration and its position on the periodic table. Overall, the atomic number is a crucial piece of information for understanding an element's properties and behavior.
Hi! The most important use of an element's atomic number is to identify the specific element and its position in the periodic table. The atomic number represents the number of protons in the nucleus of an atom of that element.

From a neutral atom's atomic number, we can also determine the number of electrons, as a neutral atom has an equal number of protons and electrons. This information helps us understand the element's chemical properties and reactivity, as the arrangement of electrons in the atom's electron shells influences its behavior in chemical reactions.

Learn more about atomic number here:

https://brainly.com/question/16858932

#SPJ11

To find the percent ionization of the acid, we need to first calculate the initial concentration of the acid (HA) before it dissociates.

Since the solution is originally 0.532 M in acid (HA), we can assume that the initial concentration of HA is also 0.532 M.

Next, we need to calculate the concentration of the conjugate base (A-) at equilibrium. We can use the equation for the dissociation of an acid:
HA + H2O ⇌ H3O+ + A-

We know that the hydronium concentration at equilibrium is 0.112 M, so the concentration of the conjugate base is also 0.112 M.

To calculate the percent ionization of the acid, we use the equation:
% ionization = (concentration of dissociated acid / initial concentration of acid) x 100

We can find the concentration of dissociated acid (H3O+) by subtracting the concentration of the conjugate base (A-) from the hydronium concentration:

[H3O+] = 0.112 M - 0 M = 0.112 M

Plugging in the values, we get:
% ionization = (0.112 M / 0.532 M) x 100 = 21.05%

Therefore, the percent ionization of the acid is 21.05%.

To know more about percent ionization :

https://brainly.com/question/1619653

#SPJ11

The percent of ionization of an acid in solution of 0.532 M in acid HA i and have a hydronium concentration of 0.112 M is equals to the 21.1%.

The ionization of acids results hydrogen ions, thus, that's why compounds act as proton donors.

Molarity of solution = 0.532 M

At Equilibrium, hydronium concentration = 0.112 M

As we know, concentration is defined as the number of moles of substance in a litre of solution, that most of time concentration is replaced by molarity. So, concentration of acid solution, [ H A] = 0.532 M

Chemical reaction, [tex]HA (aq) + H_2O -> H_3O^{ +}+A^{-}[/tex]

percent of ionization of the acid =

[tex] \frac{ [ H_3O^{+}] }{ [ HA]} × 100 [/tex]

= (0.112/0.532) × 100

= 21.1%

Hence, required value is 21.1%.

For more information about percent of ionization, visit :

https://brainly.com/question/14225136

#SPJ4

The federal government was unable to intervene in elixir sulfanilamide containing diethylene glycol that causes kidney poisoning as there was no legal requirement that medicine be safe.

In 1937, a sulfonamide antibiotic called elixir sulfanilamide, which was incorrectly made, poisoned large numbers of people in the United States. Over a hundred individuals are said to have died as a result. The 1938 Federal Food, Drug, and Cosmetic Act was passed in response to the uproar produced by this episode and subsequent tragedies of a similar nature, greatly expanding the authority of the Food and Drug Administration to regulate pharmaceuticals.

A warning that Elixir Sulfanilamide was poisonous and lethal was promptly published in newspapers and broadcast on radio once the AMA laboratory identified diethylene glycol as the dangerous component. On the 14th, a doctor in New York was informed of the fatalities and immediately contacted Food and Drug Administration headquarters.

Learn more about Elixir sulfanilamide:

https://brainly.com/question/30902703

#SPJ4

The repetition of the exercise over time is the IV (independent variable) in this example of an experimental design.

Exercise is physical activity that is done to maintain or improve one's physical health and fitness. It usually entails exercises like jogging, running, cycling, swimming, weightlifting, or taking part in sports.

Adam is experimenting with the IV to see whether it has an impact on the DV (dependent variable), which is the number of times he can open and shut the clothes pin using only his thumb and forefinger in 60 seconds, by doing the exercise several times. Adam is checking the DV to determine whether there has been a change as a result of the IV.

Adam has regulated various factors to guarantee that the outcomes are trustworthy. For each experiment, he is, for instance, using the same clothes pin, opening and closing it with the same fingers, and timing each trial for exactly 60 seconds. In order to prevent weariness from impairing his performance, Adam is also taking a one-minute break between each session.

The idea is that if Adam performs the exercise repeatedly over time, he will get more adept at it. This theory is predicated on the idea that repetition and practice can enhance a person's capacity to carry out a physical job.

Adam will compare how many times he opened and closed the clothes pin in each trial, starting with the first, to determine the outcomes. The increase in the number indicates that Adam becomes more adept at the practice. If the number falls or stays the same, the hypothesis is refuted, then it may be said that repetition had no positive effect on performance.

Overall, this scenario for an experimental design provides a straightforward yet efficient approach to evaluate the claim that doing a physical activity repeatedly will increase performance. It highlights the significance of limiting variables and calculating the DV to get relevant results.

To know more about exercise, visit:

https://brainly.com/question/13128077

#SPJ1

11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore option D is correct.

The balanced chemical equation for the complete combustion of [tex]\rm C_2H_6[/tex] (ethane) with oxygen (O2) is: 2 [tex]\rm C_2H_6 + 7 O_2\ - > 4 CO_2 + 6 H_2O[/tex]

From the balanced equation, we can see that 2 moles of [tex]\rm C_2H_6[/tex] react with 7 moles of [tex]\rm O_2[/tex]. To find out how many moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex], we can set up a proportion:

(7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) = (x moles [tex]\rm O_2[/tex] / 3.2 moles [tex]\rm C_2H_6[/tex])

Solving for x:

x = (7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) * 3.2 moles [tex]\rm C_2H_6[/tex]

x = 11.2 moles [tex]\rm O_2[/tex]

So, 11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore, the correct answer is 11.2 moles of [tex]\rm O_2[/tex].

Therefore option D is correct.

Know more about stoichiometry:

https://brainly.com/question/28780091

#SPJ12

The mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

The balanced chemical equation for the reaction between AlCl3 and Ag2SO4 is:

2 AlCl3 + 3 Ag2SO4 → Al2(SO4)3 + 6 AgCl

From the equation, we can see that 2 moles of AlCl3 react with 3 moles of Ag2SO4 to produce 6 moles of AgCl. Therefore, the mole ratio of AlCl3 to AgCl is 2:6 or 1:3.

To calculate the moles of AgCl produced, we need to first calculate the moles of AlCl3 used.

Moles of AlCl3 = concentration x volume / 1000

Moles of AlCl3 = 0.35 mol/L x 0.525 L

Moles of AlCl3 = 0.18375 mol

Since the mole ratio of AlCl3 to AgCl is 1:3, the moles of AgCl produced is:

Moles of AgCl = 3 x Moles of AlCl3

Moles of AgCl = 3 x 0.18375 mol

Moles of AgCl = 0.55125 mol

The molar mass of AgCl is 143.32 g/mol. Therefore, the mass of AgCl produced is:

Mass of AgCl = moles of AgCl x molar mass of AgCl

Mass of AgCl = 0.55125 mol x 143.32 g/mol

Mass of AgCl = 78.97 g

Therefore, the mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

Learn more about the mass

https://brainly.com/question/19694949

#SPJ4

Assuming that the capacitors are distinct and not identical, there are eight possible combinations of capacitance that can be produced using all three capacitors in a circuit.

This is because each capacitor can either be included or excluded from the circuit, resulting in two possibilities for each capacitor. With three capacitors, there are 2x2x2 = 8 possible combinations.

For example, if C1 = 1μF, C2 = 2μF, and C3 = 3μF, the eight possible combinations would be 1μF, 2μF, 3μF, 1+2=3μF, 1+3=4μF, 2+3=5μF, 1+2+3=6μF, and no capacitor connected.

To know more about capacitance, visit:

https://brainly.com/question/28445252

#SPJ1

The volume of the container is 16.9 L.To find the volume of the container, we can use the ideal gas law: PV = nRT

where P is the pressure in atmospheres (convert 812 mmHg to atm), V is the volume in liters (what we're solving for), n is the number of moles of gas (we're given 13.8 g of neon, which we can convert to moles using the atomic weight), R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin (convert 34°C to K).

First, let's convert the pressure:

812 mmHg = 1.068 atm

Next, let's convert the temperature:

34°C = 307 K

Now, let's convert the mass of neon to moles:

13.8 g / 20.18 g/mol = 0.683 mol

Now we can plug in all the values and solve for V:

V = (nRT) / P
V = (0.683 mol x 0.0821 L·atm/mol·K x 307 K) / 1.068 atm
V = 16.9 L

Learn more about molar mass here: brainly.com/question/22997914

#SPJ11

Carl has concluded that substance have ionic bonds.

The usual guideline is that a bond is considered nonpolar if the difference in electronegativities is less than or equal to 0.4, while there are no hard and fast rules, and polar if the difference is greater.

The bond between two hydrogen atoms is an illustration of a nonpolar covalent bond since they equally share electrons. The bond between two chlorine atoms is another illustration of a nonpolar covalent bond since they also equally share electrons.

To know more about ionic bonds visit:-

https://brainly.com/question/11527546

#SPJ1

Question:

During che distry class, Cort performed several lab tests on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance have ________ bonds.

A) covalent

B) diatomic

C) ionic

D) metallic

a small amount of Tollens' reagent (ammoniacal silver nitrate) is added to the sugar solution and the mixture is heated. If a reducing sugar is present, it will reduce the silver ions in the Tollens' reagent to metallic silver, which will form a silver mirror on the inside of the test tube.

Based on the structures of D-gulose and D-psicose, it can be predicted that both sugars will give a positive result in the Tollens' test because they both have an aldehyde group that can act as a reducing agent. However, the intensity of the reaction may differ for each sugar.

D-gulose has an aldehyde group at carbon 1, which is in the linear form of the sugar, while D-psicose has an aldehyde group at carbon 2. Since D-gulose can easily convert to its linear form, it is expected to give a stronger positive result in the Tollens' test compared to D-psicose, which may show a weaker positive result due to the steric hindrance of the bulky ketone group at carbon 3.

In summary, the Tollens' test can be used to distinguish between solutions of D-gulose and D-psicose by observing the intensity of the silver mirror formed. D-gulose is expected to give a stronger positive result due to its ability to convert to the linear form, while D-psicose may show a weaker positive result due to steric hindrance.

Learn more about aldehyde  here:

https://brainly.com/question/30478354

#SPJ11

The resulting chromatogram would show a shift in the retention times of the analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

The chromatography is the technique of separation of the components from a mixture. The chromatograph is referred to a visible record of the result of the chromatography.The mobile phase is referred to the gas or the liquid which flows with a different rate on the stationary phase.  The mobile phase carries the components of the mixture. It is important for the separation of the components present in the mixture.When increasing the polarity of the mobile phase to remove a contaminant peak, the resulting chromatogram would show a shift in the retention times of the analytes. The contaminant peak would ideally be eluted earlier in the chromatogram, allowing for better separation from the target analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

Learn more about mobile phase here:

https://brainly.com/question/30616326

#SPJ11

The solubility product (Ksp) of a substance is a measure of the maximum solubility of that substance in a given solution. It is calculated as the product of the molar concentrations of the ions present in the solution.

In the case of lead(II) iodide, the Ksp can be calculated as the product of the molar concentrations of Pb2+ and I− ions present in the solution.

At the given temperature, the solubility of lead(II) iodide is 0.064 /100 ml. Therefore, the molar concentrations of Pb2+ and I− ions in the solution would be 0.064/100 ml divided by the molar mass of lead(II) iodide (364/mol). This gives a Ksp of 4.07 x 10-9, which can be rounded to 4.1 x 10-9. This is the solubility product of lead(II) iodide at the given temperature.

In summary, the solubility product of lead(II) iodide at a certain temperature is 4.1 x 10-9 when rounded to two significant figures.

Know more about Molar concentrations here

https://brainly.com/question/15532279#

#SPJ11

Expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

Aluminum is chemical element with symbol Al and atomic number is 13.

4Al + 3O₂ → 2Al₂O₃

10 g Al × 1 mol Al / 26.98 g Al = 0.371 mol Al

4 g O₂ × 1 mol O₂ / 32.00 g O₂ = 0.125 mol O₂

We determine the limiting reactant by comparing the mole ratios of aluminum and oxygen in the balanced equation and reactant that produces  smaller amount of product is limiting reactant. In this case, aluminum is the limiting reactant because it produces only 0.1855 moles of aluminum oxide, which is less than the 0.25 moles of aluminum oxide produced by the oxygen:

0.371 mol Al × 2 mol Al₂O₃ / 4 mol Al = 0.1855 mol Al₂O₃

0.125 mol O₂ × 2 mol Al₂O₃ / 3 mol O2 = 0.2083 mol Al₂O₃

0.1855 mol Al₂O₃ × 101.96 g/mol = 18.93 g Al₂O₃

Therefore, expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

To know more about aluminum, refer

https://brainly.com/question/27859211

#SPJ1

The balanced chemical equation for the reaction between aluminum and silver nitrate is:

2 Al + 3 AgNO3 → 3 Ag + 2 Al(NO3)3

From the equation, we can see that 3 moles of aluminum nitrate (Al(NO3)3) are produced for every 3 moles of silver nitrate (AgNO3) consumed.

Therefore, if 0.75 moles of silver nitrate react, we can calculate the number of moles of aluminum nitrate produced as follows:

0.75 mol AgNO3 x (2 mol Al(NO3)3 / 3 mol AgNO3) = 0.50 mol Al(NO3)3

So, 0.50 moles of aluminum nitrate (Al(NO3)3) are obtained from the reaction of 0.75 mol of silver nitrate with a sufficient amount of aluminum.

Learn more about balanced chemical equation here:

https://brainly.com/question/28294176

#SPJ11

The initial rate of decomposition of X is 0.0013 M/h.

The first-order rate law is given as:

Rate = k [X]

Where, k = rate constant

[X] = concentration of X

Since the partial pressure of X is given in the problem, we need to convert it to concentration using the ideal gas law:

PV = nRT

where:

P = partial pressure of X = 0.473 atm

V = volume of the flask = 20.0 L

n = number of moles of X

R = ideal gas constant = 0.08206 L atm K^-1 mol^-1

T = temperature of the flask (assumed constant) = 298 K

Solving for n,

n = PV/RT = (0.473 atm)(20.0 L)/(0.08206 L atm K^-1 mol^-1)(298 K) = 0.952 mol X

At t = 0, the concentration of X is [X]_0 = n/V = 0.952 mol/20.0 L = 0.0476 M.

Using the given data, we can calculate the rate constant (k) as follows:

ln([X]_0/[X]) = kt

where:

t = time = 5.6 hours

Substituting the given values,

ln(0.0476/0.0376) = k(5.6 hours)

Solving for k, we get:

k = (ln(0.0476/0.0376))/5.6 hours = 0.0263 h^-1

The initial rate of decomposition of X is given by:

Rate = k[X]_0 = (0.0263 h^-1)(0.0476 M) = 0.00125 M/h

Rounding off to 2 significant digits,

Initial rate of decomposition of X = 0.0013 M/h.

To know more about decomposition, here

brainly.com/question/14057429

#SPJ4

To make solid barium sulfide, you would need to react barium metal with elemental sulfur. The balanced chemical equation for this reaction is:

Ba(s) + S(s) → BaS(s)

To carry out this reaction, you would need to add excess sulfur to the barium metal. This ensures that all the barium is consumed in the reaction, and no excess barium remains. The excess sulfur can be removed by washing the product with a suitable solvent.

It is important to note that the reaction between barium and sulfur can be exothermic, releasing heat and potentially causing a fire or explosion. Therefore, appropriate safety precautions, such as wearing gloves and eye protection and working in a well-ventilated area, should be taken when carrying out this reaction.

Learn more about barium sulfide,

https://brainly.com/question/18402799

#SPJ4

To make a solid barium sulfide (BaS) you would need to add sulfur (S) to barium (Ba) in a stoichiometric ratio of 1:1. This means that for every one mole of barium, you would need one mole of sulfur.

The reaction can be represented by the following chemical equation:

Ba + S → BaS

To carry out this reaction, you could start with a sample of metallic barium and add elemental sulfur powder to it, in a ratio of 1:1 by mole. The reaction between the two elements will produce solid barium sulfide.

It is important to note that this reaction can be highly exothermic, so appropriate safety precautions should be taken. Additionally, barium sulfide is a toxic and reactive compound, and should be handled with care.

For more question on barium sulfide click on

https://brainly.com/question/31013085

#SPJ11

Explain to the kids that since there is essentially no —which is required for fire—if the bag contains only pure carbon dioxide, the splint would burn out right away.

H2 - Hydrogen Pure hydrogen gas will burst into flames when a burning splint is added to it, making a popping sound. Oxygen (O2) A smouldering splint will rekindle when exposed to a sample of pure oxygen gas.

The flame goes out as a result of carbon dioxide replacing the oxygen it requires to burn (the effect). A popping sound is produced when a flame is near hydrogen because of how the gas burns.

learn more about flaming splint

https://brainly.com/question/30124568

#SPJ1

Answer:The pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

What is pH?

pH is a measure of the acidity of a solution.

pH is calculated from the negative logarithm to base ten of the hydrogen ions concentration of the solution.

For weak acids such as those used in the preparation of buffers, the acid dissociation constant, Ka are used to determine the pH of the solution.

Therefore, from the Ka of acetic acid, the pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

An allosteric enzyme can exist in two states, "tense" and "relaxed".

An allosteric enzyme is a type of enzyme that has multiple binding sites, including an active site where a substrate molecule binds and a regulatory site where a regulatory molecule (also called an effector) can bind. When a regulatory molecule binds to the regulatory site, it can cause a conformational change in the enzyme, which can affect the enzyme's activity.

Allosteric enzymes can exist in two main conformations or states: tense (T) and relaxed

Visit to know more about Enzyme:-

brainly.com/question/14577353

#SPJ11

One should be careful with diethyl ether and tert-butanol when using a hot plate as they have low flash points and can easily ignite.

It is important to take proper precautions such as using a well-ventilated area and avoiding any sources of ignition. Sulfuric acid and glacial acetic acid are also potentially dangerous as they are corrosive and can cause severe burns if they come into contact with skin. Propanol and butanol have higher flash points and are generally safer to use on a hot plate.

When using a hot plate in an experiment, one should be particularly careful with diethyl ether and tert-butanol. Diethyl ether is highly flammable and volatile, while tert-butanol (2-methyl-2-propanol) can generate flammable vapors when heated. These compounds pose a risk of fire or explosion if not handled properly.

To know more about acid click here

brainly.com/question/30686324

#SPJ11