As shown below, Ghana makes a triangular decoration out of clay.
When she fires it in the kiln, it shrinks proportionally. If the base of the
finished decoration is only 9 inches after firing, what is the height, in inches,
of the finished decoration?
A
B
с
D
4
5
6
10 in.
8
15 in.
TIPS AND F
Check your answe
makes sense. Since
half of 15, the answ
more than half of 10

Answers

Answer 1

Answer:

Since the decoration is in the shape of a triangle, we can use the formula for the area of a triangle to solve for its height. The area of a triangle is given by:

Area = (1/2) x base x height

Let's call the height of the decoration h. We know that the base after firing is 9 inches, so we can plug in the given values and solve for h:

Area = (1/2) x 9 x h

Area = 4.5h

We don't know the exact area of the decoration, but we do know that the decoration maintains its shape after firing. This means that the ratio of the areas before and after firing is the same, and so is the ratio of the heights and bases. Since the height and base are proportional, we can write:

h / 15 = 9 / 10

Simplifying the equation, we get:

h = (9/10) x 15

h = 13.5

Therefore, the height of the finished decoration is 13.5 inches.


Related Questions

a dance delegation of 4 people must be chosen from 5 pairs of dance partners. if 2 dance partners can never be together on the delegation, how many different ways are there to form the delegation?

Answers

There are 120 different ways to form the dance delegation from five pairs of dance partners if two dance partners can never be together on the delegation.

The total number of ways to form the delegation from five pairs of dance partners can be calculated using the combination formula. The combination formula is used to calculate the number of different combinations of n objects taken r at a time without repetition.

In this question, n is the total number of dance partners (5) and r is the number of people on the delegation (4).

Therefore, the calculation is as follows:

total number of ways = nCr

                    = 5C4

                    = 5! / 4!(5-4)!

                    = 5! / 4!1!

                    = 5 x 4 x 3 x 2 x 1 / 4 x 1 x 1

                    = 5 x 4 x 3 x 2

                    = 120

Hence, there are 120 different ways to form the dance delegation from five pairs of dance partners if two dance partners can never be together on the delegation.

Learn more about combination here:

https://brainly.com/question/20211959

#SPJ4

a professor at a local university noted that the exam grades of her students were normally distributed with a mean of 68 and a standard deviation of 17. according to the professor's grading scheme only the top 12.3 percent of her students receive grades of a. what is the minimum score needed to receive a grade of a? write your answer to two decimal points.

Answers

A minimum score of 88.95 is required to receive an "A" grade on the exam.

To determine the minimum score required to receive an "A" grade on an exam, we must first understand the meaning of standard deviation and mean. The mean is the average of a set of values, whereas the standard deviation is a measure of how far apart the values are from the mean. The minimum score required to receive an "A" grade is determined by calculating the z-score that corresponds to the top 12.3 percent of exam scores.

The formula for calculating the z-score is given as: z = (x - μ)/σ, where x is the raw score, μ is the population mean, and σ is the population standard deviation. Solving for z, we have: z = invNorm(1 - 0.123) = invNorm(0.877) ≈ 1.15. The inverse normal distribution function is used to determine the value of z that corresponds to the area to the right of the z-score. We can then use the formula for the z-score to solve for the raw score (x):
x = zσ + μ
Substituting the values we have, we get:
x = 1.15(17) + 68 ≈ 88.95
Therefore, a minimum score of 88.95 is required to receive an "A" grade in the exam.

To know more about mean click here:

https://brainly.com/question/30112112

#SPJ11

if 80% of all marketing personnel are extroverted, then what is the probability that 10 or more are extroverts at a party of 15 marketing personnel

Answers

The probability that 10 or more of 15 marketing personnel are extroverts is 0.719.

Since 80% of all marketing personnel are extroverts, the probability of any single marketing personnel being an extrovert is 0.8. The probability that 10 or more marketing personnel at the party of 15 are extroverts can be calculated using the Binomial Distribution formula:

P(X>=10) = 1 - [P(X=0) + P(X=1) + P(X=2) + P(X=3) + P(X=4) + P(X=5) + P(X=6) + P(X=7) + P(X=8) + P(X=9)]

P(X>=10) = 1 - [15C0*0.80*0.215 + 15C1*0.81*0.214 + 15C2*0.82*0.213 + 15C3*0.83*0.212 + 15C4*0.84*0.211 + 15C5*0.85*0.210 + 15C6*0.86*0.29 + 15C7*0.87*0.28 + 15C8*0.88*0.27 + 15C9*0.89*0.26]

P(X>=10) = 0.719

Therefore, 0.79 is the probability that 10 or more of the 15 marketing personnel at the party are extroverts.

To know more about probability refer here:

https://brainly.com/question/1596693#

#SPJ11

what are the advantages of a best-guess (trial and error) experiment versus a factorial or design experiment

Answers

One advantage of best-guess experiments is that they are often faster and more cost-effective than factorial or design experiments.

Best-guess (trial and error) experiments involve making a hypothesis and testing it through a series of trials until a satisfactory result is achieved. On the other hand, factorial or design experiments involve manipulating multiple variables simultaneously to determine their individual and interactive effects on a response variable.

Both approaches have their advantages and disadvantages depending on the specific research question and goals. They may also be useful in situations where there is limited knowledge about the variables of interest or when the system is too complex to be modeled accurately.

However, best-guess experiments may suffer from issues such as biased or subjective interpretation of results, a lack of control over extraneous variables, and a potential for false positives or negatives.

In contrast, factorial or design experiments provide a more systematic approach to testing hypotheses and offer greater control over variables, leading to more reliable and generalizable results. They may, however, be more time-consuming and expensive to conduct.

Ultimately, the choice between best-guess and factorial or design experiments depends on the research question, available resources, and desired level of precision and control.

To learn more about experiment click on,

https://brainly.com/question/30455826

#SPJ4

how much of a 12% 12 % salt solution must combined with a 26% 26 % salt solution to make 2 2 gallons of a 20% 20 % salt solution?

Answers

To make 2 gallons of a 20% salt solution, combine 0.86 gallons of the 12% salt solution and 1.14 gallons of the 26% salt solution.

Let x be the amount of the 12% salt solution needed in gallons, and y be the amount of the 26% salt solution needed in gallons to make 2 gallons of a 20% salt solution.

Based on the provided data, we can construct the following system of two equations:

X + y = 2 (total volume of the mixture is 2 gallons)

0.12x + 0.26y = 0.2(2) (total salt content of the mixture is 20% of 2 gallons)

Simplifying the second equation, we get:

0.12x + 0.26y = 0.4

Multiplying the first equation by 0.12 and subtracting it from the second equation, we get:

0.14y = 0.16

Y = 1.14

Substituting y = 1.14 into the first equation, we get:

X + 1.14 = 2

X = 0.86

In order to create 2 gallons of a 20% salt solution, 0.86 gallons of the 12% salt solution and 1.14 gallons of the 26% salt solution must be combined.

The complete question is:-

How much of a 12% salt solution must combined with a 26% salt solution to make 2 gallons of a 20% salt solution?

To learn more about solution, refer:-

https://brainly.com/question/30665317

#SPJ4

Which of the following shows an example of two irrational numbers being multiplied to get a rational number?
Responses

3×9

0×5√

2√ ×8√

2√×3√

Answers

Step-by-step explanation:

Which of the following shows an example of two irrational numbers being multiplied to get a rational number?

Responses

option c

Find the area of the shaded region.
11 yd
22 yd
5 yd

Answers

The shaded region of the provided number is 214.5 yards, according to the given statement.

Rectangle: What does that mean?

A rectangular shape is an illustration of a trapezoid with proportionate and matched opposite sides. It has four sides, four 90-degree borders, and is shaped like a rectangular. Any shape with only two sides is said to be rectangular.

Calculating Area by Subtracting Area from Two as well as More Regions: To determine the area for combined figures consisting of basic forms that overlap, deduct the area of the unshaded figure from the total area to obtain the area of the shaded region.

For illustration, let's calculate the size of the shaded section in the provided picture.

It is clear from the provided picture that a triangular and a rectangle have overlapped. We must deduct the triangular area from the size of the parallelogram in order to determine the area about the shaded figure. Area of the shaded figure =

Area of the rectangle −

Area of triangle

=l×b−12×b×h

=22×11−12×11×5

=214.5yd2

Hence, the area of the shaded figure is 214.5yd2

To know more about Rectangle visit:

https://brainly.com/question/2607596

#SPJ1


A store sells boxes of juice is equal size packs. Garth bought 18 boxes, Rico bought 36 boxes and Mia bought 45 boxes. What is the greatest number of boxes in each pack? How many packs did each person buy if each box contained the greatest number of boxes?

Answers

Answer:29160

Step-by-step explanation:

eric from exercise 3.30 continues driving. after three years, he still has no traffic accidents. now, what is the conditional probability that he is a high-risk driver?

Answers

The conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. Generally, insurance companies use the number of traffic violations and/or the number of claims a driver has had within a certain time period as indicators of their riskiness.

As Eric has had no accidents or traffic violations, the probability that he is a high-risk driver is very low. However, this does not mean that the probability is zero. There are many other factors which can contribute to a driver's risk, such as age, gender, experience, and location.

If Eric is an experienced driver, who has been driving for many years with no traffic accidents, then the probability of him being a high-risk driver will be lower than the average driver. On the other hand, if Eric is a new driver, or is located in an area with a high rate of traffic accidents, then the probability of him being a high-risk driver may be higher than the average driver.

Overall, the conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. However, this probability can change depending on other factors, such as his age, experience, and location.

See more about conditional probability at: https://brainly.com/question/23382435

#SPJ11

Can you solve this with workings out please

Answers

Answer:

Eighty biscuits.

Step-by-step explanation:

We need to find the limiting factor. We can do that by comparing ratio of mass of ingredient given to mass of ingredient needed for 20 biscuits

[tex]Butter:\\800:150\\=16:3\\=5.33\\Sugar:\\700:75=28:3\\=9.33\\Flour:\\1000:180\\=50:9\\=5.56\\Chocolate Chips:200:50\\=4:1\\=4\\[/tex]

We can clearly see that the choco. chips are the limiting factor since it has the lowest ratio, basically meaning we will run out of choco chips before anything else.

[tex]Biscuits=4*20=80[/tex]

Since we only have 4 times the choco chips needed to make 20 biscuits, we can only make 80 biscuits. Now you can see, we have other ingredients left, but choco chips have ran out which is why it was the limiting factor.

[tex]Flour:\\1000-4(180) = 280g[/tex]

After making 4 servings we still have 280g of flour left.

Mattew is going on a trip to Hawaii and takes a limo to the airport. The driver says it will cost $20 plus 20 cents a mile. Mattew lives 50 miles from the airport

Answers

Matthew can travel up to 150 miles for $50, assuming the cost of the limo ride remains constant at a $20 fixed cost plus $0.20 per mile. Let's say Matthew has $50 to spend on the limo ride.

We know that the cost per mile is $0.20, so we can set up an equation:

Cost = $20 + $0.20 x Distance

We can substitute $50 for Cost and solve for Distance:

$50 = $20 + $0.20 x Distance

$30 = $0.20 x Distance

Distance = $30 / $0.20

Distance = 150 miles

Find out more about Distance

brainly.com/question/29063730

#SPJ4

Right triangle STD has a longer leg measuring exactly 3√5 cm. The altitude from right angle T to hypotenuse
SD cuts the hypotenuse into two segments where the shorter part is 1 less than the longer part. Find the exact
length of each part of the hypotenuse, SU and UD, the exact length of altitude TU and the exact length of ST.

Answers

Answer:

Let's call the length of the hypotenuse SD as x.

Since the altitude from T to SD divides SD into two parts, let the length of the shorter part be y. Then the length of the longer part is x-y.

Using similar triangles, we have:

TU/TS = ST/TD

Substituting the values we have:

TU/(3√5) = √5/UD

TU = (3/5)UD

Using the Pythagorean theorem in triangle TUS, we have:

TU² + (3√5)² = TS²

(3/5 UD)² + 45 = ST²

9/25 UD² + 45 = ST²

Using the Pythagorean theorem in triangle TUD, we have:

TU² + UD² = TD²

(3/5 UD)² + UD² = x²

9/25 UD² + UD² = x²

34/25 UD² = x²

UD² = (25/34)x²

Substituting the value of UD² in the equation ST² = 9/25 UD² + 45, we get:

ST² = 9/25 (25/34)x² + 45

ST² = 45/34 x² + 45

Since y = x-y-1, we have y = (x-1)/2.

Using the Pythagorean theorem in triangle TUD, we have:

(1/4) (x-1)² + UD² = x²

(1/4) (x² - 2x + 1) + (25/34)x² = x²

(1/4)(x²) + (25/34)x² - (1/2)x + (1/4) = 0

(59/68)x² - (1/2)x + (1/4) = 0

Using the quadratic formula, we get:

x = [1/2 ± √(1/4 - 4(59/68)(1/4))]/(2(59/68))

x = [1/2 ± (3√34)/17]/(59/34)

x = 17/59 ± 6√34/59

Since x is the hypotenuse SD, we have:

UD² = (25/34) x²

UD² = (25/34) [(17/59 ± 6√34/59)²]

UD² = 136/59 ± 204√34/295

Therefore, the exact lengths of the two parts of the hypotenuse are:

SD = x = 17/59 ± 6√34/59

SU = x-y = (x-1)/2 = 8/59 ± 3√34/59

UD = y = (x-1)/2 = 8/59 ± 3√34/59

TU = (3/5) UD = (3/5) [8/59 ± 3√34/59] = 24/295 ± 9√34/295

ST² = 45/34 x² + 45 = 45/34 [(17/59 ± 6√34/59)²] + 45

ST = √[45/34 [(17/59 ± 6√34/59)²] + 45]

the admission fee at an amusement park is $4.25 for children and $7.00 for adults. on a certain day, 303 people entered the park, and the admission fees collected totaled 1824 dollars. how many children and how many adults were admitted?

Answers

The admission fee at an amusement park is $4.25 for children and $7.00 for adults. on a certain day, 303 people entered the park, and the admission fees collected totaled 1824 dollars. There are 108 children and 195 adults were admitted

Let the number of children admitted = C and the number of adults admitted = A

Total number of people admitted = 303

We can form two equations from the given information.

The first equation is to represent the number of people admitted in terms of children and adults.

So, the equation will be

C + A = 303 ------(1)

The second equation represents the total amount collected from admission fees.

So, the equation will be

4.25C + 7A = 1824 ------(2)

Multiplying equation (1) by 4.25, we get

4.25C + 4.25A = 1289.25 ------(3)

Subtracting equation (3) from equation (2), we get:

7A - 4.25A = 1824 - 1289.25

Simplifying, we get:

2.75A = 534.75

Dividing by 2.75, we get:

A = 195

Putting A = 195 in equation (1), we get:

C + 195 = 303

Simplifying, we get:

C = 108

So, there were 108 children and 195 adults admitted on that day.

For similar question on Simplification,

https://brainly.com/question/28008382

#SPJ11

draw a quadratic function that only has one root at 3

Answers

The quadratic function that only has one root at 3 and passes through the point (0,4) is: f(x) = (4/9)(x - 3)^2

What is quadratic equation?

A quadratic equation is a polynomial equation of degree 2, meaning that the highest exponent of the variable is 2. It has the general form:

ax^2 + bx + c = 0

If a quadratic function has only one root at 3, then it must be of the form:

f(x) = a(x - 3)^2

where a is a constant. This is because a quadratic function with only one root must have a double root, meaning that the parabola only touches the x-axis at that point and does not cross it. And a quadratic function with vertex at (3,0) and opening upwards satisfies this condition.

To determine the value of a, we can use any additional information that may be provided, such as the value of the function at another point. For example, if we know that f(0) = 4, then we can substitute these values into the equation to get:

4 = a(0 - 3)^2

4 = 9a

a = 4/9

To know more about quadratic function visit:

https://brainly.com/question/30929439

#SPJ1

The quadratic function that has only one root at 3 and passes through (0,4) is: [tex]f(x)=(\frac{4}{9} )(x-3)^{2}[/tex]

Why is it called a quadratic equation?

A quadratic equation is a second-degree algebraic problem in x. In its standard form, the quadratic equation is [tex]ax^2+bx+c=0[/tex], where an as well as b are the coefficients, x is the variable, and c is the value of the constant component. The essential requirement for a formula to be a quadratic equation is that the coefficient of [tex]x^2[/tex] is not zero (a 0). When writing an equation with quadratic equations in conventional format, the [tex]x^2[/tex] term comes first, then the x term, and lastly the constant term.

A quadratic equation is a polynomial expression of degree 2, which means that the variable's greatest exponent is 2. It takes the following basic form:

[tex]ax^2+bx+c=0[/tex]

If the quadratic function has only one root at 3, it must have the following form:

[tex]f(x)=a(x-3)^2[/tex]

This requirement is satisfied by a quadratic function with a vertex at (3,0) and an opening upwards.

We know that f(0) = 4, so we can plug these numbers into the equation to get:

[tex]4=a(0-3)^2[/tex]

simplify the above equation

4 = 9a

The value is,

a = 4/9

To know more about quadratic function, visit:

https://brainly.com/question/1214333

#SPJ1

what is the 1ooth digit to the right of the decimal point in the decimal representation of (1 .fi.)3000 ?

Answers

The 100th digit to the right of the decimal point in the decimal representation of (1 .fi.)3000 is 0.


First, let's convert the number (1 .fi.)3000 into its decimal representation. This is done by dividing 3000 by 10 raised to the power of the number of digits following the decimal point, which in this case is 3. We get the answer 1000, or 1.000.
Now, we can look at the 100th digit to the right of the decimal point. This will be the 0th digit from the right of the decimal point, which is 0. Therefore, the 100th digit to the right of the decimal point in the decimal representation of (1 .fi.)3000 is 0.

Learn more about decimal representation:

brainly.com/question/12342812

#SPJ11

Compare using <, >, or =.
3 yards
10 feet

Answers

Answer: 10 feet > 3 yards

Step-by-step explanation:

if 1 yard = 3 feet

then 3 yards = 9 feet

so 10 feet > 3yards

A 90 digit number 9999. Is divided by 89, what is the remainder?

Answers

The remainder when a 90-digit number 9999 is divided by 89 is 0, as the result of applying the divisibility rule of 89, which involves reversing the digits of the number and subtracting the smaller from the larger.

To find the remainder when a 90-digit number 9999 is divided by 89, we can use the divisibility rule of 89. The rule states that for any integer n, the number obtained by reversing the digits of n and subtracting the smaller from the larger is divisible by 89.

In this case, we reverse the digits of 9999 to get 9999 again, and subtract the smaller from the larger to get 0. Since 0 is divisible by any number, including 89, the remainder when 9999 is divided by 89 is 0.

To know more about divisibility:

https://brainly.com/question/11323048

#SPJ4

Answer options
2 units
4 units
6 units
10 units

Answers

As the length of the side immediately across from the angle, choice (c) 6 units is the correct answer.

what is triangle ?

Three straight lines that cross at three different locations create the two-dimensional geometric outline of a triangle. A triangle's vertices, which are the three places at which those three lines intersect, are referred to as the triangle's sides. The dimensions of a triangle's edges and angles can be used to classify it. For instance, an isosceles triangle has two equal sides and two equal angles while an equilateral triangle has three equal sides and three equal angles of 60 degrees. An angle or side of a scalene triangle cannot be equivalent.

given

The right-angled triangle XYZ in the provided illustration has a side length of 6 units and an angle opposite to it that is labelled as 30°. The extent of the side YZ, denoted as x, must be determined.

To find x, we can use the trigonometric sine relation. The length of the side directly across from the angle divided by the length of the hypotenuse is known as the sine of an angle. The hypotenuse in this instance is designated as 2x.

As a result, we have:

sin 30° = (6/2x)

Adding two times to both sides:

2x * sin 30° = 6

Using sin 30°, which has a value of 0.5:

x = (6/(2 * 0.5)) = 6/1 = 6

Consequently, the side YZ is 6 units long.

As the length of the side immediately across from the angle, choice (c) 6 units is the correct answer.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

Can someone pls help me with this

Answers

A. The equation of the line is expressed as: y = (-5/2)x + 13.

B. The x-intercept of the equation is calculated as: 26/5.

How to Find the Equation of a Line?

A. We can use the point-slope form of a linear equation:

y - y1 = m(x - x1), where m is the slope and (x1, y1) is the given point, to find the equation of a line passing through the point (4,3) with a slope of -5/2.

Substituting the values, we get y - 3 = (-5/2)(x - 4), which simplifies to y = (-5/2)x + 13 by expanding and adding 3 to both sides.

B. To find the x-intercept of the equation y = (-5/2)x + 13, we set y to 0 and solve for x. 0 = (-5/2)x + 13, which simplifies to x = 26/5 by multiplying both sides by -2/5 and adding (26/5) to both sides.

Learn more about the equation of a line on:

https://brainly.com/question/13763238

#SPJ1

How do I work this out?

Answers

a.) The mode for the chart is 24.

b.) The probability that the winning score will be 25 = 7/50

C.)The probability that the winning score will be 23 or more = 37/50.

How to calculate the probability of the selected outcomes?

The number of times the game is played = 50 times

The number of games that showed the score of 25= 7

The probability of winning a score of 25 = 7/50

The scores that are 23 and above; 10+14+7+4+2= 37

The probability of winning a score of 23 and above = 37/50

Learn more about probability here:

https://brainly.com/question/25870256

#SPJ1

. Calculate the slope of the line that passes through (3, 2) and (-7, 4).

Answers

Answer:

-0.2

Step-by-step explanation:

[tex]\frac{y2-y1}{x2-x1}[/tex]

^This here is how I calculated the slope^

Y2=4

Y1= 2

4-2= 2

X2=-7

x1=3

-7-3=-10

2/-10

or -2/10

given the following exponential function, identify whether the change represents growth or decay and determine the percentage rate of increase or decrease y=620(0.941)x

Answers

the function represents exponential decay with a rate of decrease of 5.9% per unit increase in x.

In the exponential function y = [tex]620(0.941)^x:[/tex]

The base of the exponent is 0.941, which is between 0 and 1.

As x increases, the value of [tex](0.941)^x[/tex]gets smaller and smaller, approaching 0 but never reaching it.

Therefore, the function represents exponential decay.

To determine the percentage rate of decrease, we can use the formula:

rate of decrease = (1 - base) x 100%

In this case, the base is 0.941, so the rate of decrease is:

rate of decrease = (1 - 0.941) x 100% = 5.9%

The exponential function is y = 620(0.941)^x.
To determine whether the function represents growth or decay, we need to look at the base of the exponential function, which is 0.941. Since this base is less than 1, the function represents decay.
To determine the percentage rate of decrease, we can use the formula:

r = (1 - b) x 100%
where r is the percentage rate of decrease, and b is the base of the exponential function.
In this case, b = 0.941, so we have:

r = (1 - 0.941) x 100%
= 0.059 x 100%
= 5.9%

Therefore, the exponential function y = 620(0.941)^x represents decay with a rate of 5.9% per unit of x.

A sort of mathematical function called exponential decay can be used to explain a quantity's decline across time or space. The quantity at any given time will change at a pace that is proportionate to the quantity itself, which is characterised by a decreasing rate of change. In other words, the amount of reduction decreases as time or space grows, but it never decreases to zero.

Given the following exponential function, identify whether the change represents growth or decay, and determine the percentage rate of increase or decrease. y=620(0.941)^x y=620(0.941) x

Learn more about exponential decay  here:

https://brainly.com/question/2193799

#SPJ1

Write the equation of the line that is parallel to y=- 3/2and passes through
point (2,3).

Answers

Answer:

[tex]y-3=-\frac{3}{2}(x-2)[/tex]

Step-by-step explanation:

In order to find an equation that is parallel, it must have the same slope. This means the y intercept could literally be anything.

By equation of the line, we can write it in point slope form

[tex]y-y1=m(x-x1)[/tex]

where y1 and x1 are points on the coordinate plane and m is the slope.

We are already given the slope, so we just plug in the numbers.

[tex]y-3=-\frac{3}{2}(x-2)[/tex]

Rewrite each equation without absolute value for the given conditions.
(Please help)ASAP
1. y = |x − 3| + |x +2| − |x − 5| if x >5

2. y = |x − 3| + |x +2| − |x − 5| if x < −2

3. y = |x − 3| + |x +2| − |x − 5| if 3

Answers

The equations without absolute value for the given conditions are: 1. y = -3x + 6 if x > 5; 2. y = -x - 6 if x < -2; 3. y = x - 6 if 3 ≤ x ≤ 5, and y = -x - 6 if x < 3.

1. When x > 5, the expression (x - 3) is positive, (x + 2) is positive, and (x - 5) is positive. Thus, to get absolute value we can rewrite the equation as:

y = (x - 3) + (x + 2) - (x - 5)

Simplifying this, we get:

y = 2x - 4

2. When x < -2, the expression (x - 3) is negative, (x + 2) is negative, and (x - 5) is negative. Thus, we can rewrite the equation as:

y = -(x - 3) - (x + 2) + (x - 5)

Simplifying this, we get:

y = -2x + 6

3. When -2 ≤ x ≤ 3, the expression (x - 3) is negative, (x + 2) is positive, and (x - 5) is negative. Thus, we can rewrite the equation as:

y = -(x - 3) + (x + 2) - (x - 5)

Simplifying this, we get:

y = 10 - x

When x > 3, the expression (x - 3) is negative, (x + 2) is positive, and (x - 5) is positive. Thus, we can rewrite the equation as:

y = -(x - 3) + (x + 2) + (x - 5)

Simplifying this, we get:

y = -2x + 6

To learn more about absolute value please click on below link        

https://brainly.com/question/29764645

#SPJ1

A factory produces components of which 1% are defective. The components are
packed in boxes of 10. A box is selected at random

Answers

the probability that there are at most 2 defective components in the box is approximately 0.9044 and the probability of having at most 3 defective components out of 250 boxes is very close to zero.

a) Let X be the number of defective components in a box of 10 components. Then X follows a binomial distribution with n=10 and p=0.01, since the probability of a component being defective is 0.01. We want to find the probability that there are at most 2 defective components in the box, i.e., P(X ≤ 2).

Using the binomial probability formula, we get:

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)

= (10 choose 0) × 0.01⁰ × 0.99¹⁰ + (10 choose 1) × 0.01¹ × 0.99⁹ + (10 choose 2) × 0.01² × 0.99⁸

= 0.90438222

Therefore, the probability that there are at most 2 defective components in the box is approximately 0.9044 (rounded to four decimal places).

b) We want to find the probability of having at most 3 defective components out of 250 boxes, each containing 10 components. Since np = 100.01 = 0.1 < 5 and n × (1-p)=10 × 0.99=9.9 > 5, we can use the normal approximation to the binomial distribution, with mean μ = np = 2.5 and standard deviation σ = √np(1-p) = 1.577.

Let X be the number of boxes with at most 3 defective components. Then X follows an approximate normal distribution with mean μ' = np=2.5250 = 625 and standard deviation σ' = √np(1-p)) = 12.5 × 1.577 = 19.712.

We want to find P(X ≤ 250), which can be written as P(X < 251) since X is a discrete variable. Using the continuity correction, we can approximate this probability as P(X < 251.5). Then we standardize the variable:

z = (251.5 - μ')/σ' = (251.5 - 625)/19.712 = -18.919

Using a standard normal table or calculator, we find that P(Z < -18.919) is a very small number, practically zero. Therefore, the probability of having at most 3 defective components out of 250 boxes is very close to zero.

To learn more about probability click here

brainly.com/question/30034780

#SPJ4

Complete Question

factory produces components of which 1% are defective. The components are packed in boxes of 10. A box is selected by random a) Find the probability that there are at most 2 defective components in the box b) Use a suitable approximation to find the probability of having at most 3 defective (inclusive 3 cases) components out of 250.

the process mean can be adjusted through calibration. to what value should the mean be adjusted so that 99% of the cans will contain 12 oz or more?

Answers

The value of mean should be adjusted to 12 + 2.576σ so that 99% of the cans will contain 12 oz or more.

The process mean can be adjusted through calibration. The mean is a measure of central tendency in a dataset that represents the average value of a group of data. The population standard deviation is denoted by σ. The formula for the population mean is as follows: μ = (Σ xi) / n, where xi represents the data values and n represents the total number of data values.

Here we can use the formula of confidence interval as,μ±z σ/√n, Where μ is the mean, z is the z-score, σ is the standard deviation is the sample size. Given,The required confidence level is 99%. So,α = 1-0.99α = 0.01. We can find z from the z-score table at α/2 = 0.005 as, z = 2.576.

Now, we need to find out the value of μ when the mean will be 12 ounces so that 99% of cans will contain 12 ounces or more. So,μ ± z σ/√n = 12. We know that, P(X > 12) = 0.99. The formula for standardization is, Z = (X - μ) / σHere, X = 12, σ is given and we need to find the value of μ.z = (X - μ) / σ2.576 = (12 - μ) / σμ - 12 = 2.576 × σμ = 12 + 2.576 × σ.

Now, the value of μ should be adjusted to 12 + 2.576σ so that 99% of the cans will contain 12 oz or more.

To know more about mean refer here:

https://brainly.com/question/30546599

#SPJ11

five observations taken for two variables follow. xi4611316 yi5050406030 what does the scatter diagram indicate about the relationship between the two variables?

Answers

If we see the scatter plot we can conclude that the possible relation between x and y is linear and with a positive correlation since when the values of x increase the values for y increases as well.

[tex]Cov(x,y) =\frac{\sum_1^n(x_i-X')(y_i-Y')}{n-1}[/tex]

 [tex]\sum_1^5(6-16)(6-10)+(11-16)(9-10)....(27-16)(12-10)=106\\\\and\\Cov(x,y)=\frac{106}{4}=26.5\\\\r=0.693[/tex]

For this part we use excel in order to create the scatterplot and we got the result on the figure attached

If we see the scatter plot we can conclude that the possible relation between x and y is linear and with a positive correlation since when the values of x increase the values of y increase as well

The correlation coefficient is a "statistical measure that calculates the strength of the relationship between the relative movements of two variables". It's denoted by r and its always between -1 and 1.

And in order to calculate the correlation coefficient we can use this

[tex]Cov(x,y) =\frac{\sum_1^n(x_i-X')(y_i-Y')}{n-1}[/tex]

:  

[tex]Cov(x,y) =\frac{\sum_1^n(x_i-X')(y_i-Y')}{n-1}[/tex]

 [tex]\sum_1^5(6-16)(6-10)+(11-16)(9-10)....(27-16)(12-10)=106\\\\and\\Cov(x,y)=\frac{106}{4}=26.5\\\\r=0.693[/tex]

learn more about  scatter plot

https://brainly.com/question/29231735

#SPJ4

can someone help me please i don't understand this

Answers

The transformation that would not result in a congruent figure when performed on triangle RST is A. A dilation by a scale factor of 2 with respect to point R.

The equation that has the same solution as the system of equations is C. 4x + 9y = 10

4x + 6y = 24.

Which transformations changes congruency ?

Transformations that change the shape or size of a figure can change its congruency.  A dilation is a transformation that changes the size of a figure so this would mean that RST dilated would not result in a congruent figure.

How to find the equation?

When the system of equations, 4x + 9y = 10, 2x + 3y = 12 is solved, we find that x = 13 and y = - 14/ 3.

Options A,B, and D cannot have the same value because the numbers are the same and so they should have different values., Only option C can be the same and when the values are slotted in, this is proven.

Option C, 4x + 9y = 10 , 4x + 6y = 24 is therefore correct.

Find out more on equations at https://brainly.com/question/25869125

#SPJ1

What is the equation of the line of reflection that reflects shape P into shape Q

Answers

The equation of the line of reflection that reflects shape P into shape Q is y = −2x + 12.

To find the equation of the line of reflection that reflects shape P into shape Q, we need to follow some steps:

Step 1: Draw the mirror line. To reflect a point or shape, we must have a mirror line. The mirror line is the line that passes through the reflection and is perpendicular to the reflecting surface. It serves as a reference for reflecting points or shapes.

Step 2: Find the midpoint of PQ. The midpoint of PQ is the point that lies exactly halfway between P and Q.

Step 3: Find the slope of PQ. The slope of PQ is the rise over run or the difference of the y-coordinates over the difference of the x-coordinates.

The slope formula is given by m = (y2 − y1) / (x2 − x1).

Step 4: Find the perpendicular slope of PQ. The perpendicular slope of PQ is the negative reciprocal of the slope of PQ. It is given by m⊥ = −1/m.

Step 5: Write the equation of the line of reflection. The equation of the line of reflection is given by y − y1 = m⊥(x − x1) or y = m⊥x + b, where m⊥ is the perpendicular slope of PQ and b is the y-intercept of the line. To find b, we substitute the coordinates of the midpoint of PQ into the equation and solve for b. Then we substitute m⊥ and b into the equation to get the final answer.

for such more question on reflection

https://brainly.com/question/26642069

#SPJ11

Solve the following quadratic function by utilizing the square root method.

Answers

Answer:

x = ±9

Step-by-step explanation:

If x² = k, then x = ±√k.

x² - 81 = 0

x² = 81

x = ±√81

x = ±9

Other Questions
which treatment of the heat-killed siii bacterial extract, when mixed with rii bacteria, resulted in mice surviving infection? what is the principal organic product formed in the reaction of ethylene oxide with sodium cyanide (nacn) in aqueous ethanol? mosaics are made with small, closely spaced pieces of stone, glass, beads, pebbles (or other material) called: group of answer choices impasto gilding tessarae mosaic You are offered a job that pays $34,000 during the first year, with an annual increase of 6% per year beginning in the second year. That is, beginning in year 2, your salary will be 1.06 times what it was in the previous year. What can you expect to earn in your fourth year on the job? Round your answer to the nearest dollar. if a marketer is to execute an effective marketing strategy using imc, which aspects should he or she consider? select all that apply: responses pt. 2Directions: answer true or false for the following 11. Competition is a major reason that businesses offer credit because being able to buy now and pay later is often the deciding factor in the choice of a company with which to do business. ________12. A good credit rating has become so necessary that some people open credit accounts even when they have cash on hand. ________13. One important disadvantage of obtaining credit is the inability to save money. ________14. All businesses must comply with credit legislation at both the state and federal levels. ________15. The Uniform Commercial Credit Code (UCCC) was drawn up to give states a model to follow in writing their own sets of credit laws. ________16. Retail Installment Sales Acts (RISAs) govern only installment sales of personal property. ________17. The Truth-in-Lending Act (TILA) is also called the Consumer Credit Cancellation Act (CCCA) and gives customers the right to cancel a transaction after five working days. ________18. Under the Equal Credit Opportunity Act (ECOA), credit applicants must be notified within 30 days of their acceptance or rejection. ________19. The Fair Credit Reporting Act (FCRA) requires businesses that extend credit to respond within 30 days to any customer complaint or inquiry concerning a billing error. ________20. The Fair Credit Billing Act (FCBA) allows a business 90 days to explain or correct a billing error. ________ a newsletter publisher believes that under 69% 69 % of their readers own a rolls royce. is there sufficient evidence at the 0.10 0.10 level to substantiate the publisher's claim? state the null and alternative hypotheses for the above scenario. Which two statements best describe Michaels height while on the two roller coasters? which will have a larger velocity upon hitting the ground: a rock thrown vertically upward from a bridge, or a rock thrown vertically downward from the same bridge? assume both rocks are thrown from the same height and with the same speed. Why is momentum not conserved in real life situations in the world of grain, production is typically measured in bushels. bushel is a measure of 9 N = 480 109(a) Write N as a number in standard form.(1)(b) Write N as a product of powers of its prime factors. Show your working clearly.(3)(c) Find the largest factor of N that is an odd number. Compare the amount of sand in the top cone of the hourglass to the amount there will be when the height of the sand in the top cone is only 1 inch. HINT: The cones are similar question 1: how should insurance markets work? options discussed in class completely private insurance markets universal public insurance compulsory insurance employer-sponsored insurance means-tested health insurance solar energy is also known as . group of answer choices convection longwave energy power conduction insolation true or false? when children enter primary school and are screened for speech, language, and hearing problems, a clinician may detect possible literacy problems and should refer the children to a reading specialist. 9. The linear regression equation is = 34.38x - 91.75. Use the equation to predict how far this4.38x-91-75 Useperson will travel after 10 hours of driving. the low-level wind shear alert system (llwas) provides wind data and software process to detect the presence of a which term describes an accumulation of air or gas in the pleural space that causes the lung to collapse? in 2005 the population of a district was 35,700 with a continuous annual growth rate of approximately 4%, what will the population be in 2030 according to the exponential growth function?