As shown in the figure below, Kaitlin is standing 93 feet from the base of a leaning tree. The tree is growing at an angle of
88° with respect to the ground. The angle of elevation from where Kaitlin is standing to the top of the tree is 35°. Find the
length, x, of the tree. Round your answer to the nearest tenth of a foot.
35°
-93 ft-
H
88°
feet
X
5

Therefore , the solution of the given problem of function comes out to be the function's behavior on that range because it is not specified for negative values of x.

The midterm exam will include questions on design, geometry, numbers, each division, as well as actual and hypothetical geographic places. A piece of work describes the connections between variable elements that cooperate to produce the same outcome. A utility is a structure made up of numerous unique parts that work together to create unique outcomes for each input.

Here,

Given that the function in the graph you supplied is undefinable for negative values of x, its domain is (0, infinity).

Therefore, referring to the function as declining on the interval is illogical. (0, -infinity).

As we travel from right to left on the interval, we can observe that the function's values are indeed decreasing. (0, infinity).

We refer to this interval as the function's declining one because of this.

On the interval, we could state that the function is decreasing.

(-infinity, 0). However, in this specific instance, we are unable to discuss the function's behavior on that range because it is not specified for negative values of x.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

Answer:

The first term of the sequence is -3 and the common difference is -1/3. Therefore, the second term of the sequence can be found by adding the common difference to the first term:

second term = first term + common difference

second term = -3 + (-1/3)

second term = -10/3

Similarly, we can find the third term by adding the common difference to the second term:

third term = second term + common difference

third term = -10/3 + (-1/3)

third term = -11/3

And we can find the fourth term by adding the common difference to the third term:

fourth term = third term + common difference

fourth term = -11/3 + (-1/3)

fourth term = -4

Therefore, the first four terms of the sequence are -3, -10/3, -11/3, and -4.

[tex](\stackrel{x_1}{8}~,~\stackrel{y_1}{5})\qquad (\stackrel{x_2}{5}~,~\stackrel{y_2}{8}) ~\hfill \stackrel{slope}{m}\implies \cfrac{\stackrel{\textit{\large rise}} {\stackrel{y_2}{8}-\stackrel{y1}{5}}}{\underset{\textit{\large run}} {\underset{x_2}{5}-\underset{x_1}{8}}} \implies \cfrac{ 3 }{ -3 } \implies - 1[/tex]

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{5}=\stackrel{m}{- 1}(x-\stackrel{x_1}{8}) \\\\\\ y-5=-x+8\implies {\Large \begin{array}{llll} y=-x+13 \end{array}}[/tex]

Answer:

i did this in 8th grade. (I'm homeschooled)

Step-by-step explanation:

Heres the best i got

A: y=2x+3. This is an equation for the linear relationship in slope-intercept form. The equation states that the value of y is equal to the slope of the line, 2, multiplied by the value of x, plus 3.

Slope is a measure of the steepness of a line. It is the ratio between the vertical change in a line (change in y-values) over the horizontal change in the same line (change in x-values). It is also referred to as the rate of change, as it is a measure of how quickly the value of y changes with respect to the x-value.

This equation is used to describe a straight line that has a constant rate of change between two variables. This equation can be used to determine the slope, y-intercept, and x-intercept of a line.

The slope, which is the coefficient of x in the equation (2 in this case), is the rate at which y changes with respect to x. It is the rise over run, or the change in y over the change in x. The y-intercept is the value of y when x is equal to 0 (in this case, it is 3). The x-intercept is the value of x when y is equal to 0 (in this case, it is -3/2).

This equation is often used to represent a linear relationship between two variables, such as the amount of money a person earns in relation to the number of hours they work.

For more questions related to variable

https://brainly.com/question/27894163

#SPJ1

The lumpsum amount invested in 18 years ago for the given value Future value and interest is = Rs 2763,18.3268

What about lumpsum?

In mathematics, a lump sum refers to a single, fixed amount of money or quantity of something that is paid or received all at once, rather than being paid or received in installments or over a period of time.

The term "lump sum" can be used in various mathematical contexts, such as in finance, where it can refer to a single payment or investment, or in statistics, where it can refer to a single value or data point.

Define future value:

In mathematics, future value (FV) refers to the value of an investment or cash flow at a specified date in the future, assuming a certain rate of return.

The future value of an investment is the amount of money that an investor would expect to have at a specified date in the future if they were to invest a certain amount of money today, and if that investment earns a certain rate of return over time.

⇒ The formula for calculating the future value of an investment is:

[tex]FV = PV x (1 + r)^n[/tex]

According to the given information:

Interest Rate = 5%

Time Period =  18 years

Future Value = Rs 6649,93.

Using the concept of TVM calculation we have that,

Present value = [tex]\frac{Future Value}{(1+r)^{t} }[/tex]

So, the Present Value = [tex]\frac{664993}{(1+0.05)^{18} } = 2763,18.3268[/tex]

Hence, the Lumpsum Amount is Rs 2763,18.3268

To know more about lumpsum visit:

https://brainly.com/question/21126923

#SPJ1

The parallelogram ABCD's congruency can be proven using Side-Angle-Side (SAS) congruence theorem.

Prove that ΔABC ≅ ΔDCB using the Side-Angle-Side (SAS) congruence theorem.

Given that ABCD is a parallelogram, AB || CD and BC || AD. Therefore, ∠ABC ≅ ∠DCB and ∠ACB ≅ ∠DCA because they are corresponding angles.

AB ≅ CD and BC ≅ AD because opposite sides of a parallelogram are congruent.

Lastly, AC ≅ AC because it is a shared side between the two triangles.

Therefore, the following congruent parts:

∠ABC ≅ ∠DCB (by corresponding angles)

AB ≅ CD (by opposite sides)

BC ≅ AD (by opposite sides)

AC ≅ AC (shared side)

The SAS congruence theorem concludes that ΔABC ≅ ΔDCB.

Find out more on Side-Angle-Side here: https://brainly.com/question/30459968

#SPJ1

Image transcribed:

Prove ΔABC ≅ ΔDCB

The length of OM, given that the triangles are similar to each other, is calculated as: 14.4.

Similar triangles are triangles that have the same shape but may have different sizes. They have the same angles, but the lengths of their sides are proportional. This means that corresponding sides of similar triangles are in proportion, and the ratio of their corresponding sides is constant.

Since triangle JKL is similar to triangle MNO, therefore:

JK/MN = JL/MO

Substitute:

5/24 = 3/x

Cross multiply:

5x = 72

5x/5 = 72/5

x = 14.4

Learn more about similar triangles on:

https://brainly.com/question/29782809

#SPJ1

a. The shape οf the distributiοn οf the sample mean time is nοrmal.

b. The standard error is 0.5345.

Standard deviatiοn is: It is a measure οf hοw spread οut numbers are. It is the square rοοt οf the Variance, and the Variance is the average οf the squared differences frοm the Mean.

Given that:

μ =35

σ = 2

n = 14

a. The shape of the distribution of the sample mean time is normal.

b. To calculate the standard error of the mean time, we would apply this formula,

Standard error :

[tex]$ \rm SE = \frac{ \sigma}{\sqrt{(n)} }[/tex]

[tex]$ \rm SE = \frac{ 2}{\sqrt{(14)} }[/tex]

SE = 0.5345

Thus, the standard error is 0.5345.

To learn more about standard deviation, Visit

https://brainly.com/question/475676

#SPJ1

Complete question:

Majesty Videο Prοductiοn Inc. wants the mean length οf its advertisements tο be 30 secοnds. Assume the distributiοn οf ad length fοllοws the nοrmal distributiοn with a pοpulatiοn standard deviatiοn οf 2 secοnds. Suppοse we select a sample οf 16 ads prοduced by Majesty.

a. What can we say abοut the shape οf the distributiοn οf the sample mean time?

b. What is the standard error of the mean time?

Answer: $28,383.68.

Step-by-step explanation:

The first step is to determine the number of monthly payments over the 5-year period, which is 5 years x 12 months/year = 60 months.

Next, we can use the formula for the future value of an annuity, which is:

FV = P * ((1 + r/n)^(n*t) - 1) / (r/n)

where:

FV is the future value of the loan (the amount owed at the end of the 5-year period)

P is the initial principal amount ($20,000 in this case)

r is the annual interest rate (6%)

n is the number of compounding periods per year (12 for monthly compounding)

t is the total number of years (5)

Plugging in these values, we get:

FV = $20,000 * ((1 + 0.06/12)^(12*5) - 1) / (0.06/12)

FV = $28,383.68

Therefore, the balance owed at the end of the 5-year period would be $28,383.68.

Answer:

x = 0

Step-by-step explanation:

9x - 7 = -7

Add 7 to both sides.

9x - 7 + 7 = -7 + 7

9x = 0

Divide both sides by 9.

9x/9 = 0/9

x = 0

Answer:

x=0

Step-by-step explanation:

Answer:

27 cups of oats

Step-by-step explanation:

23
+ 4=27

So the probability that Angela gets to go to the meeting is 2/5.

Probability is a measure of the likelihood or chance of an event occurring. It is a numerical value between 0 and 1, where 0 means that the event is impossible and 1 means that the event is certain. Probability can be calculated by dividing the number of favorable outcomes by the total number of possible outcomes. It is an important concept in many fields, including mathematics, statistics, physics, and engineering, and is used to make predictions, analyze data, and make decisions under uncertainty.

Here,

There are a total of 5 people in the club, so there are 10 possible pairs of people that could be chosen to go to the meeting. Since each pair is equally likely to be chosen, the probability of any particular pair being chosen is 1/10.

To determine the probability that Angela gets to go to the meeting, we need to count the number of pairs that include Angela. There are 4 other people in the club, so there are 4 possible pairs that include Angela. Therefore, the probability that Angela gets to go to the meeting is:

P(Angela) = number of pairs that include Angela / total number of pairs

= 4 / 10

= 2 / 5

To know more about probability,

https://brainly.com/question/30034780

#SPJ1

the fraction of the class that are boys is 4/9. And the fraction of the class that are girls is 5/9.

What is ratio?

A ratio is a comparison of two or more quantities that are related in some way. It expresses the relationship between these quantities in terms of the number of times one quantity contains another. Ratios are usually expressed as a fraction, where the numerator represents the first quantity and the denominator represents the second quantity. For example, the ratio of boys to girls in a class of 40 students may be expressed as 2:3 or 2/3, meaning there are 2 boys for every 3 girls. Ratios can also be expressed in other forms, such as percentages or decimals. Ratios are commonly used in mathematics, science, engineering, and everyday life to compare quantities and make predictions or decisions.

A fraction is a number that represents a part of a whole or a ratio of two quantities. It consists of two numbers, a numerator and a denominator, separated by a line. The numerator represents the number of parts being considered, while the denominator represents the total number of parts in the whole or in the comparison. Fractions are used in many areas, such as mathematics, science, engineering, cooking, and everyday life. They can be added, subtracted, multiplied, and divided, and can be converted to decimals or percentages.

a) The total ratio of boys to girls in the class is 4+5 = 9. Therefore, the fraction of the class that are boys is 4/9.

b) The question is unclear as it seems to be asking for the same answer as in part (a). If you meant to ask for the fraction of the class that are girls, you can use the same approach: the fraction of the class that are girls is 5/9.

To know more about ratio visit :-

https://brainly.com/question/12024093

#SPJ1

Answer:

64, 69, 88, 88, 91, 92, 93, 95, 97, 97, 100

Median= 92

Mode= 88, 97

Mean= 88.55

Range= 36

Quartile 1= 88

Quartile 2= 92

Quartile 3= 97

Interquartile range= 9

Minimum= 64

Maximum= 100

Not sure if this helped but I hope it did

This report highlights the impact of human activity on three different locations: New York City, the Amazon Rainforest, and the Sahara Desert. The measurements were taken 50 years ago, in the present day, and the predicted future development impact.

## New York City

Water pollution in parts per million (ppm) was measured in New York City. Fifty years ago, the water pollution was 625ppm, and presently, it has increased to 893ppm. The predicted future development impact is 843ppm. To decrease human impact on this location, it is recommended to create gardens on all of the rooftops. The plants will help absorb some of the pollutants and reduce runoff into waterways.

## Amazon Rainforest

CO2 levels in parts per million (ppm) were measured in the Amazon Rainforest. Fifty years ago, the CO2 levels were 318ppm, and presently, it has increased to 402ppm. The predicted future development impact is 378ppm. To decrease human impact on this location, it is recommended to limit the amount of timber that can be removed per year. The Amazon Rainforest is often referred to as the "lungs of the planet" due to its ability to absorb carbon dioxide and produce oxygen. By limiting deforestation, the amount of carbon dioxide released into the atmosphere will decrease, and the rainforest will continue to produce oxygen, benefiting both the local and global environment.

## Sahara Desert

The loss of land by erosion in meters was measured in the Sahara Desert. Fifty years ago, the erosion was 1.2 meters, and presently, it has increased to 3.5 meters. The predicted future development impact is 2.6 meters. To decrease human impact on this location, it is recommended to build better enclosures to decrease overgrazing by livestock. Overgrazing leads to soil compaction, which makes it difficult for vegetation to grow and prevents the soil from holding water. By implementing better enclosures, the livestock will be limited to a smaller area, allowing the vegetation to recover and hold the soil in place.

## Conclusion

In conclusion, all three locations experienced an increase in human impact over the years. By analyzing the data, the location that could benefit the most from decreasing human impact is the Amazon Rainforest. Limiting the amount of timber that can be removed per year will have a positive impact on this location. However, it is important to continue monitoring all three locations to ensure that the human impact is decreasing and not increasing.

## Recommendations for Local Communities

To decrease the local effects of human impact on the environment, two recommendations are:

1. Reduce the use of single-use plastics, such as straws and bags, to decrease pollution. Single-use plastics are a major source of pollution in our oceans, and by reducing our reliance on them, we can help reduce the amount of plastic that ends up in our waterways.

2. Plant more trees and vegetation to increase the amount of oxygen in the air. Trees and plants produce oxygen through photosynthesis, which helps clean the air we breathe. By planting more trees and vegetation in our communities, we can help reduce the amount of pollution in the air and create a healthier environment for ourselves and future generations.

## Recommendations for Global Governments

To decrease the global effects of human impact on the environment, two recommendations are:

1. Invest in renewable energy sources, such as solar and wind power, to decrease the use of fossil fuels. Fossil fuels are a major contributor to greenhouse gas emissions, which are responsible for climate change. By investing in renewable energy sources, we can decrease our reliance on fossil fuels and reduce our carbon footprint.

2. Implement policies to decrease deforestation and promote reforestation to decrease the loss of wildlife habitats and increase the amount of oxygen in the air. Deforestation is a major contributor to climate change, as it releases carbon dioxide into the atmosphere and reduces the amount of oxygen produced by trees. By implementing policies to decrease deforestation and promote reforestation, we can help mitigate the effects of climate change and create a healthier environment for all living beings.

Answer:

To find the real and imaginary parts of the complex number 26 = a + bi, we can use the fact that:

a + bi = 26

Taking the complex conjugate of both sides, we get:

a - bi = 26

Adding the two equations, we get:

2a = 52

Solving for a, we get:

a = 26

Substituting this value into one of the equations, we get:

26 + bi = 26

Therefore, b = 0.

Therefore, the real part of 26 is a = 26, and the imaginary part is b = 0.

answer is

512

Step-by-step explanation:

1.6x80=128

128x4=512

Answer:

183.3

Step-by-step explanation:

Since there were 1 angle and 2 sides, I used law of cosines

Answer:

The inequality that represents this situation is 15x + 10y ≥ 1100, since Ezra needs to earn at least $1100 to buy the laptop.

To check if (60, 20) is a solution to this inequality, we need to substitute x = 60 and y = 20 into the inequality and see if it is true:

15(60) + 10(20) ≥ 1100

900 + 200 ≥ 1100

1100 ≥ 1100

Since 1100 ≥ 1100 is true, this means that (60, 20) is a solution to the inequality. This means that if Ezra works 60 hours mowing lawns and 20 hours walking dogs, he will earn enough money to buy the laptop.

The point (60, 20) represents the combination of hours worked for mowing lawns (x) and walking dogs (y) that will result in Ezra earning enough money to buy the laptop. The x and y values are the inputs or variables, while the inequality 15x + 10y ≥ 1100 is the constraint that must be satisfied. The solution (60, 20) is the output or result of the system of inequalities, and represents the combination of hours worked that will satisfy the constraint.

Answer:

Step-by-step explanation:

Part A:

Let's assume that the velocity of the runner changes linearly over time. We can use the slope-intercept form of a linear equation, y = mx + b, to describe the velocity of the runner at different times. In this case, the y-axis represents the velocity in km/h and the x-axis represents time in hours. We can define:

y = velocity of the runner in km/h

x = time in hours

The velocity of the runner changes by -2/3 km/h for every hour that passes. This gives us a slope of -2/3. We can use the point-slope form of a linear equation to find the equation of the line:

y - 5 = -2/3(x - 1)

Simplifying this equation, we get:

3y - 15 = -2x + 2

Rearranging to standard form, we get:

2x + 3y = 17

So the equation in two variables in standard form that can be used to describe the velocity of the runner at different times is 2x + 3y = 17.

Part B:

To graph the equation obtained in Part A for the first 5 hours, we can simply plot points for different values of x and y. For example, we can use x = 0, 1, 2, 3, 4, and 5 to find the corresponding values of y using the equation 2x + 3y = 17. Then we can plot these points on a graph and connect them with a straight line.

Here are the values of y for different values of x:

x = 0, y = 17/3

x = 1, y = 5

x = 2, y = 13/3

x = 3, y = 3

x = 4, y = 7/3

x = 5, y = 1

Plotting these points and connecting them with a straight line, we get the graph of the equation 2x + 3y = 17 for the first 5 hours:

|

6.0 -| .

| .

5.5 -| .

| .

5.0 -| .

|.

4.5 -|

|

4.0 -| .

| .

3.5 -| .

| .

3.0 -| .

|.

2.5 -|

|

2.0 -| .

| .

1.5 -| .

| .

1.0 -|.

|

0.5 -|

|

--------------

0 1 2 3 4 5

The y-intercept of the line is 17/3, which represents the initial velocity of the runner at time 0. The slope of the line is -2/3, which represents the rate of change of the velocity over time.

Answer: CLICK THANKS IF YOU LIKE MY ANSWER. HAVE A GOOD DAY SIR/MAAM #KEEPSAFE

Part A:

Let v be the velocity of the runner in km/h and let t be the time elapsed in hours. We can use the two given data points to form a system of two equations:

v = 5 when t = 1

v = 3 when t = 3

To find the equation in standard form, we can first use point-slope form:

v - 5 = m(t - 1) (using the point (1, 5))

v - 3 = m(t - 3) (using the point (3, 3))

Simplifying both equations:

v - 5 = m(t - 1)

v - 3 = m(t - 3)

v = mt + (5 - m)

v = mt + (3m - 3)

Setting the right-hand sides equal to each other:

mt + (5 - m) = mt + (3m - 3)

Simplifying and rearranging:

-m = -2

m = 2

Substituting m = 2 into one of the equations above:

v = 2t + 3

This is the equation in two variables in standard form that describes the velocity of the runner at different times.

Part B:

To graph the equation v = 2t + 3 for the first 5 hours, we can plot points for different values of t and then connect them with a line. For example:

When t = 0, v = 3, so the point (0, 3) is on the line.

When t = 1, v = 5, so the point (1, 5) is on the line.

When t = 2, v = 7, so the point (2, 7) is on the line.

When t = 3, v = 9, so the point (3, 9) is on the line.

When t = 4, v = 11, so the point (4, 11) is on the line.

When t = 5, v = 13, so the point (5, 13) is on the line.

Plotting these points on a coordinate plane and connecting them with a line, we get the graph of the equation v = 2t + 3 for the first 5 hours:

    |

 15 +-------*

    |       |

 13 +           *

    |           |

 11 +               *

    |               |

  9 +                   *

    |                   |

  7 +                       *

    |                       |

  5 +                           *

    |                           |

  3 +---------------*-----------*

    0   1   2   3   4   5   6   7

The x-axis represents time (t) in hours, and the y-axis represents velocity (v) in km/h. The line starts at (0, 3) and has a slope of 2, indicating that the velocity is increasing by 2 km/h for every hour that passes.

Step-by-step explanation:

f(x) = [tex]x^{2}[/tex] -> f(x) = [tex]x^2[/tex] - 18 (translation) -> f(x) = [tex](x-3)^2[/tex] - 18 (horizontal translation) -> f(x) = -6[tex](x-3)^2[/tex] + 18 - 6x (vertical stretching)

To transform the function f(x) =[tex]x^{2}[/tex] into f(x) = [tex]x^{2}[/tex] - 6x + 18, we need to apply a series of transformations. Here are the steps:

Translation: We need to shift the graph of f(x) = [tex]x^{2}[/tex] down by 18 units to obtain f(x) = [tex]x^{2}[/tex] - 18. This can be done by subtracting 18 from the function, which results in f(x) = [tex]x^2[/tex]- 18.

Horizontal translation: Next, we need to shift the graph of f(x) = [tex]x^{2}[/tex] - 18 to the right by 3 units to obtain f(x) =[tex](x-3)^2[/tex] - 18. This can be done by replacing x with (x-3) in the function, which results in f(x) =[tex](x-3)^2[/tex]- 18.

Vertical stretching: Finally, we need to vertically stretch the graph of f(x) = [tex](x-3)^2[/tex] - 18 by a factor of -6 to obtain f(x) = [tex](x-3)^2[/tex] - 6x + 18. This can be done by multiplying the function by -6, which results in f(x) = -6[tex](x-3)^2[/tex] + 18 - 6x.

So, the series of transformations required to transform f(x) = [tex]x^{2}[/tex] into f(x) = [tex]x^{2}[/tex] - 6x + 18 is:

f(x) = [tex]x^{2}[/tex] -> f(x) =[tex]x^{2}[/tex] - 18 (translation) -> f(x) =[tex](x-3)^2[/tex] - 18 (horizontal translation) -> f(x) = -6[tex](x-3)^2[/tex]+ 18 - 6x (vertical stretching)

know more about function visit :

https://brainly.com/question/31062578

#SPJ9

The answer of the given question based on rational parent function , to identify a correct transformation of the function, The correct answer choice is (c) Left 5.

A function is  mathematical relationship that assigns  unique output value for each input value. It describes relationship between two variables, where  output value is dependent on input value. A function can be represented by  equation, a graph, or  table. In its simplest form,  function takes  input value, performs a specified operation on that value, and produces  corresponding output value.

Functions are used to model real-world phenomena, to solve problems, and to analyze and understand complex systems. They are  fundamental concept in mathematics and are used in  wide variety of fields, like science, engineering, economics, and finance.

The given equation is y = 12/(x + 5), which represents the rational parent function. To identify a correct transformation of the function, we can consider the effect of each transformation on the parent function.

a) Vertical reflection: This transformation would change the sign of the function, resulting in y = -12/(x + 5). This is not the given equation, so it is not a correct transformation.

b) Vertical stretch by 12: This transformation would multiply the function by 12, resulting in y = 12(12/(x + 5)) = 144/(x + 5). This is not the given equation, so it is not a correct transformation.

c) Left 5: This transformation would shift the function to the left by 5 units, resulting in y = 12/(x + 10). This is a correct transformation of the function, as it represents a horizontal shift of 5 units to the left.

d) Down 5: This transformation would shift the function down by 5 units, resulting in y = 12/(x + 5) - 5. This is not the given equation, so it is not a correct transformation.

Therefore, the correct transformation of the rational parent function as described by the given equation is a horizontal shift of 5 units to the left. The answer choice is (c) Left 5.

To know more about Variables visit:

https://brainly.com/question/2466865

#SPJ1

The correct transformation of the function on rational parent function as described by the given equation. The correct answer choice is (c) Left 5.

A function is  mathematical relationship that assigns  unique output value for each input value. It describes relationship between two variables, where  output value is dependent on input value. A function can be represented by  equation, a graph, or  table. In its simplest form,  function takes  input value, performs a specified operation on that value, and produces  corresponding output value.

The given equation is y = 12/(x + 5), which represents the rational parent function. To identify a correct transformation of the function, we can consider the effect of each transformation on the parent function.

a) Vertical reflection: This transformation would change the sign of the function, resulting in y = -12/(x + 5). This is not the given equation, so it is not a correct transformation.

b) Vertical stretch by 12: This transformation would multiply the function by 12, resulting in y = 12(12/(x + 5)) = 144/(x + 5). This is not the given equation, so it is not a correct transformation.

c) Left 5: This transformation would shift the function to the left by 5 units, resulting in y = 12/(x + 10). This is a correct transformation of the function, as it represents a horizontal shift of 5 units to the left.

d) Down 5: This transformation would shift the function down by 5 units, resulting in y = 12/(x + 5) - 5. This is not the given equation, so it is not a correct transformation.

Therefore, the correct transformation of the rational parent function as described by the given equation is a horizontal shift of 5 units to the left. The answer choice is (c) Left 5.

To know more about Variables visit:

https://brainly.com/question/2466865

#SPJ1

Answer:

2.75d+2t <= 40

Step-by-step explanation:

i may be wrong but I tried

Answer:

In each statement:

The rate is the percentage or ratio that relates the quantity being described to the base.

The base is the total quantity or amount that the rate is applied to.

The percent is the rate expressed as a percentage, or the part of the base that corresponds to the rate.

Therefore , the solution of the given problem of unitary method comes out to be yields 6 quarts of punch as a result.

This common convenience, already-existing variables, or all important elements from the original Diocesan customizable survey that followed a particular event methodology can all be used to achieve the goal. If it does, there will be another chance to get in touch with the entity. If it doesn't, each of the crucial elements of a term proof outcome will surely be lost.

Here,

The quantity of punch produced by the recipe is:

If the punch bowl has an 8-quart capacity and the recipe fills it 3/4 full.

=> 6 pints =  8 * 3/4.

The formula yields 6 quarts of punch as a result.

Therefore , the solution of the given problem of unitary method comes out to be yields 6 quarts of punch as a result.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The volume of the solid is 7.58 thousandths when rounded to the nearest thousandth.

Area is a measure of the size of a given space or the amount of a given surface. It can be measured in square feet, square meters, acres, hectares, and other units. Area can be used to describe the size of a two-dimensional shape or the surface area of a three-dimensional object. Area can also be used to calculate the amount of material needed to cover a given space, such as for a roof, carpet, or other covering.

To find the volume of the solid, we will use the following formula:
V=∫baπ(y2−(x−1)2)dx

Where b is the upper bound of the integral, a is the lower bound of the integral and y is the height of the solid.

Since the region R is the base of the solid, we can set a = 0 and b = 2, since this is the x-value at which the two functions intersect. Additionally, we can set y = ln(x) + 1 since this is the height of the solid.

Therefore, the volume of the solid is:
V = ∫02π(ln(x)2 + 12 − (x−1)2)dx

Calculating the integral, we get:
V = [π(xln(x)2 + x − 2xln(x) − x + 1)]02

Substituting the bounds of the integral, we get:
V = [π(22ln(2)2 + 2 − 4ln(2) − 2 + 1)] − [π(02ln(0)2 + 0 − 2ln(0) − 0 + 1)]

Simplifying the equation, we get:
V = π(ln(2)2 + 1 − 2ln(2))

Finally, substituting the value of ln(2) into the equation, we get:
V = 3.14159 (2.386294 + 1 − 4.772188) ≈ 7.58 thousandths

Therefore, the volume of the solid is 7.58 thousandths when rounded to the nearest thousandth.

In conclusion, the volume of the solid whose base is the region R and each cross section perpendicular to the a-axis is a semicircle is 7.58 thousandths when rounded to the nearest thousandth. This was calculated by integrating the equation V=∫baπ(y2−(x−1)2)dx with the bounds of integration a=0 and b=2 and the height of the solid y=ln(x)+1.

To know more about area click-
http://brainly.com/question/16519513
#SPJ1

We need a piece of wood that is approximately 8.1 inches long to replace AD. So, the answer is option A.

In geometry, a triangle is a three-sided polygon consisting of three line segments that connect three non-collinear points. These three points are called the vertices of the triangle, and the line segments connecting them are called sides. The sum of the angles of a triangle is always 180 degrees.

Triangles can be classified based on their sides and angles. A triangle with all three sides of equal length is called an equilateral triangle, while a triangle with two sides of equal length is called an isosceles triangle. A triangle with no sides of equal length is called a scalene triangle.

Triangles can also be classified based on their angles. A triangle with all three angles less than 90 degrees is called an acute triangle, while a triangle with one angle greater than 90 degrees is called an obtuse triangle. Finally, a triangle with one angle equal to 90 degrees is called a right triangle.

First, we can use trigonometry to find the length of side AC. Since angle BCD is 30 degrees and BC = 14, we have:

sin(30) = AC/14

AC = 14*sin(30)

AC = 7 inches

Next, we can use the fact that triangle ACD is a 15-75-90 triangle to find the length of AD. Since angle CAD is 75 degrees, we have:

tan(75) = AD/AC

AD = ACtan(75)

AD = 7tan(75)

Using a calculator, we get:

AD ≈ 8.09 inches

Therefore, we need a piece of wood that is approximately 8.1 inches long to replace AD. So, the answer is option A.

To know more about angle visit:

https://brainly.com/question/10217384

#SPJ1

Answer:

5.9

Step-by-step explanation:

segment BD was 8.1 so segment AD cant be 8.1