The total pressure in a 2 L flask that contains 5.33 g of Ne and 13.40 g of Ar at 38°C is 5.20 atm.
To calculate the total pressure, you must use the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the amount of gas (in moles), R is the gas constant, and T is temperature in Kelvin.
You must first convert the temperature from Celsius to Kelvin (38°C = 311.15 K). Next, you must convert the mass of each gas into moles (5.33 g Ne = 0.01502 mol, 13.40 g Ar = 0.2225 mol).
Finally, you can calculate the total pressure (P = (0.01502 mol Ne + 0.2225 mol Ar) * 0.08206 L atm K⁻¹ mol⁻¹ * 311.15 K/ (2 L) = 5.20 atm).
To know more about ideal gas law click on below link:
https://brainly.com/question/28257995#
#SPJ11
the temperature of a constant volume of gas at 1.00 atm is 25 oc. in order to increase the pressure to 2.00 atm, what temperature is needed?
Answer: 323 degrees Celsius :)
Explanation:
Calculating volume (formula) and density of regular shaped objects
Please help I need to complete this assignment fast :( I’m not sure on how to do it, If you don’t know how to do it don’t answer pls
The density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.
How to solve
PART A: Density of a regular shaped object:
Trial 1: mass of the object = 162.20 g
volume of object = L x H x W = 4.90 cm x 3.90 cm x 2.90 cm
= 55.419 cm^3
Therefore density of the object = mass / volume = 162.20 g / 55.419 cm^3
= 2.9268 g/cm^3
trial 2: mass of the object = 162.18 g
volume of object = L x H x W = 4.89 cm x 3.90 cm x 2.88 cm
= 54.92448 cm^3
Therefore density of the object = mass / volume = 162.18 g / 54.92448 cm^3
= 2.9528 g/cm^3
Average = [ 2.9268 + 2.9528 ] /2 = 5.8796 / 2 = 2.9398 g / cm^3 = 1.94 g / cm^3.
The accepted value is 2.73 g / cm^3 for aluminium. The difference is 0.21
% error = 100 x difference / accepted value = 100 x 0.21/2.73 = 7.7 %.
---------------------------------------------------------------------------------------------------
Part B: Determination of density of an irregular shaped object:
Trial 1:
mass of the marble chips = 10.25 g
Volume of the marble chip = final volume of water - initial volume of water
= 53.8 - 50 = 3.8 mL
Therefore density of marble chip = mass / volume = 10.25 g / 3.8 mL
= 2.697 g / mL
Trial 2:
mass of the marble chips = 10.32 g
Volume of the marble chip = final volume of water - initial volume of water
= 53.9 - 50.1 = 3.8 mL
Therefore density of marble chip = mass / volume = 10.32 g / 3.8 mL
= 2.716 g / mL
Average = [2.697 + 2.716] / 2 = 5.413 / 2 = 2.71 g / mL
The accepted density of marble chip = 2.70 g / mL The difference is 0.01
% error = 100 x difference / accepted value = 100 x 0.01/ 2.70 = 0.37 %.
--------------------------------------------------------------------------------------------------------------------
PART C: Determination of density of saline solution:
Trial 1:
Volume of the saline solution = 10 mL
mass of the saline solution = finall mass - initial mass
= 35.66 - 25.36 = 10.3 g
Density of the saline solution = mass / volume = 10.3 g / 10 mL = 1.03 g / mL
Trial 2:
Volume of the saline solution = 10 mL
mass of the saline solution = finall mass - initial mass
= 35.55 - 25.35 = 10.2 g
Density of the saline solution = mass / volume = 10.2 g / 10 mL = 1.02 g / mL
Average =[ 1.03 + 1.02 ] / 2 = 1.025 g / mL
Thus the unknown sample B has the density of 1.025 g / mL.
The composition of salt in this solution can be determined by interpolation.
salt % = 0 + 5 x [ 1.025-0.998] / [1.036 - 0.998] ( using the values given in the table )
= 0 + 5 x 0.027 / 0.038
= 3.55 %.
Thus the density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.
Read more about density here:
https://brainly.com/question/6838128
#SPJ1
What is the heat, q , in joules transferred by a chemical reaction to the reservoir of a calorimeter containing 155 g of dilute aqueous solution ( c = 4.184 J/g⋅K ) if the reaction causes the temperature of the reservoir to rise from 22.0 ºC to 26.5 ºC ?
To calculate the heat transferred by the chemical reaction, we can use the equation:
q = mcΔT
where q is the heat transferred, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the change in temperature.
Given:
m = 155 g
c = 4.184 J/g⋅K
ΔT = 26.5 ºC - 22.0 ºC = 4.5 ºC
Substituting these values into the equation, we get:
q = (155 g) x (4.184 J/g⋅K) x (4.5 ºC)
q = 29168.98 J or approximately 29.2 kJ
Therefore, the heat transferred by the chemical reaction to the calorimeter reservoir is 29.2 kJ.
For more questions like reactions visit the link below:
https://brainly.com/question/29555042
#SPJ11
explain why oxygen forms 2 bonds to hydrogen to make a water molecule, while nitrogen forms 3 bonds to make a molecule of ammonia
Oxygen and nitrogen are both nonmetals, meaning they form covalent bonds when they react.
Oxygen forms two covalent bonds with hydrogen because it has six valence electrons and needs two more electrons to complete its octet. Nitrogen has five valence electrons and needs three more electrons to complete its octet, so it forms three covalent bonds with hydrogen. The chemical formula for a water molecule is H2O, meaning that two hydrogen atoms are bonded to one oxygen atom. The chemical formula for ammonia is NH3, meaning that three hydrogen atoms are bonded to one nitrogen atom. The bond between hydrogen and oxygen is a polar covalent bond, while the bond between hydrogen and nitrogen is a non-polar covalent bond. This is due to the difference in electronegativity between oxygen and nitrogen, which causes oxygen to be more electronegative than nitrogen.
To know more about electronegativity click on below link :
https://brainly.com/question/17762711#
#SPJ11
if 7.66 g of cuno3 is dissolved in water to make a 0.140 m solution, what is the volume of the solution in milliliters?
The volume of the solution in milliliters is 547.13 mL.
How to calculate the volume of the solution in milliliters?
The molarity of the solution is given by;
Molarity = Number of moles of solute / Volume of solution in liters
Using the above formula, we can calculate the volume of the solution as;
Volume of solution in liters = Number of moles of solute / Molarity
Number of moles of CuNO3 can be determined as follows:
Number of moles = Given mass of the substance / Molar mass of the substance
= 7.66 g / (Cu: 63.55 g/mol + N: 14.01 g/mol + 3O: 3 x 16 g/mol)
= 0.05 mol
Substituting the values of molarity and number of moles of CuNO3 in the formula of volume of solution, we get:
Volume of solution in liters = Number of moles of solute / Molarity
= 0.05 mol / 0.140 M = 0.357 L
Converting the volume in liters to milliliters;
Volume in milliliters = Volume in liters × 1000
= 0.357 L × 1000= 357 mL
Thus, the volume of the solution in milliliters is 357 mL.
Learn more about volume of the solution here:
https://brainly.com/question/14710169#
#SPJ11
a face-centered cubic cell contains x atoms at the corners of the cell and y atoms at the faces. what is the empirical formula of the solid?
The empirical formula of the solid can be represented as x:y.
The empirical formula of the solid is determined by the ratio of the atoms found at the corners and faces of the face-centered cubic cell.
Since the number of atoms at the corners is represented by x, and the number of atoms at the faces is represented by y, then the empirical formula of the solid can be represented as x:y.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the empirical formula of the solid can be written as 2:6, or 1:3.
The empirical formula of the solid, it is necessary to first determine the total number of atoms that make up the cell.
This can be done by multiplying the number of atoms at the corners (x) by 8, since there are 8 corners in a face-centered cubic cell, and adding the result to the number of atoms at the faces (y).
This total number of atoms can be represented as T, and can be written as T = 8x + y.
The empirical formula of the solid is then determined by dividing the number of atoms at the corners (x) and faces (y) by the total number of atoms (T). This calculation can be written as x/T and y/T.
Therefore, the empirical formula of the solid is determined by the equation x/T:y/T.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the total number of atoms in the cell is 14 (8x2 + 6).
Therefore, the empirical formula of the solid can be calculated as 2/14:6/14, or 1:3.
The empirical formula of the solid in a face-centered cubic cell can be determined by,
calculating the total number of atoms in the cell (8x + y), and then dividing the number of atoms at the corners (x) and faces (y) by this total number. The result is the empirical formula of the solid, which is represented as x:y.
to know more about empirical formula refer here:
https://brainly.com/question/14044066#
#SPJ11
doppelbocks are lagers unified by what characteristic? group of answer choices they have almost no bitterness a low alcohol content a high alcohol content they are very bitter
Doppelbocks are lagers unified by their high alcohol content.
Doppelbocks are German lagers that are dark and full-bodied. They are recognized for their rich malt flavors and alcoholic content, which is typically over 7% by volume. The monks of Munich developed the style in the 17th century, and the doppelbock style has been associated with monastic brewing ever since.
Doppelbocks are unified by high alcohol content because they are high in maltose and other fermentable sugars, which make them perfect for long, cold fermentations that yield a rich, complex, and smooth flavor. Lagers are a type of beer typically fermented at low temperatures and for an extended period. They are one of two significant categories of beer, the other being ales. Lagers are usually lighter in color and smoother in flavor than ales. They are also typically lower in alcohol content and have a cleaner, crisper taste than ales.
In conclusion, Doppelbocks are lagers unified by high alcohol content.
Read more about alcohol :
https://brainly.com/question/947751
#SPJ11
PLEASE HELP THIS IS URGENT
The equation for the production of sulfur trioxide gas from sulfur dioxide (57.50 g) and oxygen (20.0 L) using the ideal gas law indicates;
The volume of sulfur trioxide that will be formed at STP is 20.1 L
The volume of sulfur trioxide formed at 15.0°C and 98920 Pa is 21.7 L
What is the ideal gas law?The ideal gas law is an equation of state that describes an ideal gas behavior. It relates the pressure (P), volume (V), and temperature (T) of a gas to the number of moles (n) of the gas and the universal gas constant. The equation is written as P·V = n·R·T
The balanced chemical equation for the reaction is: 2SO₂ (g) + O₂ (g) --> 2SO₃ (g)
First, we need to convert the given amounts of reactants to moles. We can do this by using the molar mass of SO₂ (64.07 g/mol) and the ideal gas law for O₂ (P·V = n·R·T). At STP (Standard Temperature and Pressure), the temperature is 0°C (273.15 K) and the pressure is 1 atm (101325 Pa). The gas constant R is 8.314 J/Kmol.
The number of moles of SO₂ is: 57.50 g/(64.07 g/mol) = 0.897 moles
The number of moles of O₂ is; (101325 Pa)·(20.0 L)/(8.314 J/K.mol)·(273.15 K) = 0.892 moles
Since the ratio of SO₂ to O₂ in the balanced equation is 2:1, SO₂ is the limiting reactant and will determine the amount of product formed.
The number of moles of SO₃ produced is; (0.897 mol SO₂)·(2 mol SO₃/2 mol SO₂) = 0.897 mol (Which is based on the number of moles of SO₂ in the reactant side of the equation)
At STP, one mole of any gas occupies a volume of 22.4 L, so the volume of SO₃ produced at STP is: (0.897 mol) × (22.4 L/mol) ≈ 20.1 LTo find the volume of SO₃ at 15°C and 98920 Pa, we can use the ideal gas law again; P·V = n·R·T
V = (n·R·T)/P = ((0.897 mol)·(8.314 J/K.mol)·(288.15 K))/(98920 Pa) ≈ 21.7 LTherefore, the volume of sulfur trioxide formed at STP is 20.1 L and at 15°C and 98920 Pa is 21.7 L
Learn more on the ideal gas law here: https://brainly.com/question/29588640
#SPJ1
which solute will have a more negative enthalpy of solution, assuming the same solvent is used and the solvent-solute interactions are the same in both cases: csi or lif?
CsI (cesium iodide) is expected to have a more negative enthalpy of solution compared to LiF (lithium fluoride), assuming the same solvent is used and the solvent-solute interactions are the same in both cases.
What is the enthalpy of solution?The enthalpy of solution is the energy released or absorbed when a solute dissolves in a solvent. The enthalpy of solution is negative if energy is released when the solute dissolves, indicating that the solution is exothermic.
CsI is expected to have a more negative enthalpy of solution compared to LiF because CsI has larger ions with a higher charge than LiF, and larger ions with higher charge tend to have stronger interactions with solvent molecules, leading to a more negative enthalpy of solution.
Learn about enthalpy here https://brainly.com/question/3836944
#SPJ1
which period contains three elements that commonly exist as diatomic molecules at standard temperature and pressure conditions?
Answer:
H2, N2, O2, F2, Cl2
Explanation:
calculate the number of water, x, of crystalization in an unknown sample, having a molar mass of 129.839 g/mol when unhydrated. (you need to find the ratio of moles of water to moles of dry sample)
The ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
The calculation of the number of water molecules in a crystal can be performed by analyzing the molar mass of the unhydrated crystal, which contains no water molecules. The ratio of moles of water to moles of dry sample can then be found by comparing the molar masses of the hydrated and unhydrated crystals.
The formula for calculating the number of water molecules in a crystal is as follows:
Percentage of water in crystal = (Molar mass of water / Molar mass of hydrate) * 100
The percentage of water in a crystal can then be used to determine the ratio of moles of water to moles of dry sample. To calculate the number of water molecules in an unknown sample, you must first determine the molar mass of the unhydrated sample. This can be done by dividing the mass of the sample by the number of moles in the sample. The mass of the sample is the sum of the masses of the dry sample and the water molecules. The molar mass of the water molecules is 18.015 g/mol.
To determine the mass of the water molecules, you must subtract the mass of the dry sample from the mass of the sample. The molar mass of the unhydrated sample can then be determined by dividing the mass of the dry sample by the number of moles in the sample. Once the molar mass of the unhydrated sample is known, the percentage of water in the sample can be calculated using the formula given above.
Finally, the ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
Learn more about Molar mass
brainly.com/question/22997914
#SPJ11
When vinegar and baking soda react, the
product gets colder. This is a (endothermic or exothermic) reaction
a student titrates a 25 ml of an unknown concentration of hcl with 35 ml of a 0.890 m solution of koh toreach the equivalence point. what is the ph of the unknown hcl solution?
In order to determine the pH of the unknown HCl solution, a titration calculation must be performed and the pH is 0.903.
The process of adding a standard solution to another solution with the aim of determining the concentration of the second solution is known as titration. HCl is a strong acid, while KOH is a strong base, which implies that when they react, their equivalence point is pH 7. The pH scale is used to measure the acidity or basicity of a solution. pH is defined as the negative logarithm of the hydrogen ion concentration of a solution. pH is a measure of the acidity or basicity of a solution. It is a dimensionless value that ranges from 0 to 14.1. Before the titration of the HCl solution with the KOH solution,
Let's calculate the number of moles of KOH using the formula given below:
Number of moles of KOH = concentration of KOH × volume of KOH solution
Number of moles of KOH = 0.890 M × 0.035 L
= 0.03115 mol
We now convert moles of KOH to moles of HCl to find the concentration of HCl using the equation given below:
Moles of KOH = Moles of HCl
0.03115 mol KOH = Moles of HCl
25 mL of HCl = 0.025 L of HCl
Therefore, the concentration of HCl = 0.03115 mol / 0.025 L
= 1.246 M
We have now found the concentration of the HCl solution to be 1.246 M.
2. To find the pH of HCl, let's first recall that the concentration of H+ ions in a solution of a strong acid is equal to its concentration.
Since HCl is a strong acid, its pH can be found using the formula:
pH = -log[H+]
pH = -log[1.246]
pH = 0.903
Hence, the pH of the unknown HCl solution is 0.903.
Learn more about pH: https://brainly.com/question/172153
#SPJ11
how many grams of glucose (c6h12o6 ) would you need to prepare 1.25 l of 4% (by mass) glucose solution? assume that the percentage by mass is the number of grams per 100 ml of solution.
To prepare 1.25 L of 4% (by mass) glucose solution, the amount of glucose (C6H12O6) needed is approximately 50 grams.
Glucose is a monosaccharide with the molecular formula C6H12O6. It is also known as dextrose, grape sugar, or blood sugar. Glucose is produced by photosynthesis in green plants and is the main source of energy for the cells of the human body. Glucose is a carbohydrate with a chemical structure similar to other sugars.
A 4% (by mass) glucose solution is a solution that contains 4 grams of glucose in 100 ml of water. It is also known as a 4% weight/volume (w/v) solution. This solution is often used in medical settings to treat hypoglycemia, or low blood sugar levels.
To calculate the amount of glucose (C6H12O6) needed to prepare a 4% (by mass) glucose solution:
Step 1: Convert the volume of the solution to milliliters.1.25 L x 1000 mL/L = 1250 mL
Step 2: Calculate the mass of glucose needed to make a 4% (by mass) solution.4 g glucose/100 mL solution x 1250 mL solution = 50 g glucose
Therefore, approximately 50 grams of glucose (C6H12O6) would be needed to prepare 1.25 L of a 4% (by mass) glucose solution.
To know more about glucose refer here:
https://brainly.com/question/2396657#
#SPJ11
Given 30 grams NaBr how many grams of Cl2 are required to complete this reaction?
2NaBr + Cl2 = 2NaCl + Br2
Answer:
10.3 grams
Explanation:
The balanced equation shows that 1 mole of Cl2 reacts with 2 moles of NaBr. To find out how much Cl2 is required to react with 30 grams of NaBr, we need to convert grams to moles.
First, we need to find the molar mass of NaBr:
NaBr = 23 + 79.9 = 102.9 g/mol
Now we can calculate the number of moles of NaBr:
30 g NaBr ÷ 102.9 g/mol = 0.291 moles NaBr
From the balanced equation, we know that 1 mole of Cl2 reacts with 2 moles of NaBr. Therefore, we need half as many moles of Cl2 as we have moles of NaBr:
0.291 moles NaBr ÷ 2 = 0.1455 moles of Cl2
Finally, we can convert moles of Cl2 to grams using its molar mass:
Cl2 = 35.5 x 2 = 71 g/mol
0.1455 moles Cl2 x 71 g/mol = 10.3 grams of Cl2
Therefore, 10.3 grams of Cl2 are required to react completely with 30 grams of NaBr in this reaction.
Classify the bond types for each of the following pairs of atoms (PLEASE ANSWER ALL AND EXPLAINNN :)
A.) Hydrogen and nitrogen
B.) Carbon and sulfur
C.) fluorine and fluorine
D.) beryllium and oxygen
Answer:
a.polar covalent
b.ovalent
c.covalent
d.covalent
Explanation:
a.the atomic number of nitrogen is 7 and atomic number of hydrogen is 1, so the type of bond firmed btw them is called polar covalent
b.The total valence electrons in sulphur atom are 6.thus, one atom of carbon forms two *Covalent bonds* with sulphur atoms each in order to complete it octet. Hence, the bond btw carbon and sulfur us covalent bond
c.The two fluorine atom form a stable F molecule by sharing two element ; the linkage ² is called a Covalent bonds
a polar covalent bond is associated with which of the following? group of answer choices interactions between nuclei unequal sharing of electrons equal sharing of electrons the transfer of electrons
A polar covalent bond is associated with unequal sharing of electrons.
A polar covalent bond is a covalent bond in which electrons are not equally shared between the bonded atoms. It is formed when two or more atoms share electrons in such a manner that the nucleus of one atom exerts a greater attraction on the electrons than the other atom.
As a result of the unequal sharing of electrons, the atoms have partial charges. In polar covalent bonds, the electrons spend more time near the atom with a stronger nucleus. As a result, one atom in a polar covalent bond becomes partially negative, and the other becomes partially positive. Polar covalent bonds can be found in a variety of compounds, including water, ammonia, and hydrogen chloride, among others.
Learn more about polar covalent bond at:
https://brainly.com/question/10166021
#SPJ11
a mixture of 2.00 moles of h2, 3.0 moles of nh3 and 4.00 moles of co2 and 5.00 moles of n2 exerts a total pressure of 800 torr. what is the partial pressure of each gas?
The partial pressure of H in the mixture is 160 torr, 240 torr, 320 torr, and 400 torr, respectively.
The total pressure of the mixture is 800 torr. To calculate the partial pressure of each gas, you will need to use the ideal gas law equation, PV = nRT, where P is the pressure of the gas, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.
Since the total pressure is constant, the equation can be rearranged as follows:
P1 = (n1/ntotal) x Ptotal = (n1/ntotal) x 800 torr.
Using this formula, we can calculate the partial pressure of each gas in the mixture:
Partial pressure of H2 = (2.00 moles / (2.00 + 3.00 + 4.00 + 5.00)) x 800 torr = 160 torrPartial pressure of NH3 = (3.00 moles / (2.00 + 3.00 + 4.00 + 5.00)) x 800 torr = 240 torrPartial pressure of CO2 = (4.00 moles / (2.00 + 3.00 + 4.00 + 5.00)) x 800 torr = 320 torrPartial pressure of N2 = (5.00 moles / (2.00 + 3.00 + 4.00 + 5.00)) x 800 torr = 400 torr
Therefore, the partial pressure of H in the mixture is 160 torr, 240 torr, 320 torr, and 400 torr, respectively.
To know more about partial pressure click here:
https://brainly.com/question/13199169
#SPJ11
sodium metal is also readily oxidized by oxygen. if the product of the reaction were dissolved in water, what would be the color of the litmus for a litmus test? explain. what is the product?
What is the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm?
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm can be calculated using the Ideal Gas Law. The Ideal Gas Law is expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature.
In this case, we know that the pressure is 2.05 atm and the volume is 2 L. We also know that helium is a monoatomic gas with a molar mass of 4 g/mol. We can use the universal gas constant R = 0.0821 L atm/mol K. Plugging in these values, we get:
2.05 atm × 2 L = n × 0.0821 L atm/mol K × T
Dividing both sides by 0.0821 L atm/mol K gives:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × T)
Simplifying, n = 50 T / R. We can now solve for T: n = 50 T / R => T = nR / 50
Substituting in the values we have:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × 1 mol / 4 g)
= 24.88 molT = (24.88 mol × 0.0821 L atm/mol K) / 50
= 0.04111 K or 41.11 °C.
Therefore, the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
To learn more about temperature; https://brainly.com/question/25677592
#SPJ11
How many grams of chlorine gas can be liberated from the decomposition of 169. 0 g. Of AuCl3
169.0 g of [tex]AuCl _{3}[/tex] can liberate 118.4 g of [tex]Cl_{2}[/tex] gas upon decomposition. The molar mass of [tex]AuCl _{3}[/tex] is 303.33 g/mol, which means that 1 mole of [tex]AuCl _{3}[/tex]contains 3 moles of chlorine (3 atoms of chlorine).
To determine the moles of [tex]AuCl _{3}[/tex]in 169.0 g, we divide the mass by the molar mass:
169.0 g / 303.33 g/mol = 0.557 moles of [tex]AuCl _{3}[/tex]
Since each mole of [tex]AuCl _{3}[/tex] produces 3 moles of chlorine, the total moles of chlorine that can be liberated from the decomposition of 0.557 moles of [tex]AuCl _{3}[/tex]is:
0.557 moles x 3 = 1.671 moles of [tex]Cl_{2}[/tex]
Finally, we use the molar mass of chlorine ([tex]Cl_{2}[/tex]), which is 70.90 g/mol, to convert the moles of [tex]Cl_{2}[/tex]to grams:
1.671 moles x 70.90 g/mol = 118.4 g of [tex]Cl_{2}[/tex]
Therefore, 169.0 g of [tex]AuCl _{3}[/tex]can liberate 118.4 g of [tex]Cl_{2}[/tex]gas upon decomposition.
Learn more about molar mass
https://brainly.com/question/22997914
#SPJ4
a sample of neon has a volume of 40.81 m3 at 23.5c. at what temperature, in kelvins, would the gas occupy 50.00 cubic meters? assume pressure is constant. a. 363.27 k b. 230.54 k c. 242.0 k d. 28.79 k
At the temperatute of 363.27 K the sample of the gas Neon would occupy a volume of 50.00 cubic meters. Therefore option A can be considered correct.
Using the combined gas law in order to solve this problem
(P₁V₁)/T₁ = (P₂V₂)/T₂
( P is the pressure, V is the volume, and T is the temperature)
Since the pressure is constant, we can simplify the equation to:
V₁/T₁ = V₂/T₂
After inserting the values given in the problem equation,
V₁ = 40.81 m³
T₁ = 23.5°C + 273.15 = 296.65 K
V₂ = 50.00 m³
We can solve for T₂= (V₂/V₁) × T₁
T₂ = (50.00/40.81) × 296.65
T₂ = 363.27 K
Hnce, the temperature in kelvins at which the gas would occupy the volume of 50.00 cubic meters is calculated out to be 363.27 K.
Learn more about Gas Law :
https://brainly.com/question/27009857
#SPJ4
a sample of metal has a mass of 22.82 g, and a volume of 6.03 ml. what is the density of this metal?
The density of the metal sample is 3.781 g/mL.
To calculate the density, you need to divide the mass (22.82 g) by the volume (6.03 ml). Thus, 22.82 g / 6.03 ml = 3.781 g/mL.
Density is a measure of the mass per unit volume of a material or object. It is calculated by dividing the mass by the volume. The SI unit of density is kg/m3, but for solids and liquids, g/mL is a commonly used unit of density.
The density of a material or object will change depending on the temperature or pressure, so it is important to consider the temperature and pressure when determining the density of a material or object. For example, the density of water changes from 0.958 g/mL at 4°C to 0.997 g/mL at 25°C.
Therefore, when calculating the density of a metal sample, it is important to ensure that the mass and volume are measured at the same temperature and pressure.
To know more about SI unit click on below link:
https://brainly.com/question/12750330#
#SPJ11
how many unique sets of 4 quantum numbers are there to represent the electrons in the 4f subshell? remember that the pauli exclusion principle states that each electron must have its own unique set of 4 quantum numbers.
The number of unique sets of 4 quantum numbers to represent the electrons in the 4f subshell is 70.
The four quantum numbers that make up an electron's set are the:
(i) principal quantum number (n)
(ii) angular momentum quantum number (l)
(iii) magnetic quantum number (m_l)
(iv) spin quantum number (m_s).
Each of these electrons has a limited range of the above numbers in their respective shell.
The principal quantum number for all the electrons in the 4f subshell is 4.
The angular momentum quantum number has a value of 3 corresponding to the f subshell.
The magnetic quantum number has a range of -3 through +3 for the electrons in the f subshell.
The spin quantum number has a range of -1/2 or +1/2.
Even if the principal quantum number and angular momentum quantum number are the same for all the electrons, the other two factors contribute to each electron having a unique set of quantum numbers.
Therefore, when these four quantum numbers are combined, they make up 70 unique sets of 4 quantum numbers that can be used to represent the electrons in the 4f subshell, in accordance with the Pauli Exclusion Principle.
To know more about quantum numbers, refer here:
https://brainly.com/question/16977590#
#SPJ11
calculate the ph for each case in the titration of 50.0 ml of 0.210 m hclo(aq) with 0.210 m koh(aq). use the ionization constant for hclo.
The initial pH of the titration is 2.50 and the final pH of the titration is: -1.67.
To calculate the pH for each case in the titration of 50.0 mL of 0.210 M HClO (aq) with 0.210 M KOH (aq), you must first use the ionization constant for HClO. The ionization constant for HClO is equal to 1.5 x 10-2. Now, you can calculate the pH of the titration.
At the beginning of the titration, the pH can be determined by the initial concentration of HClO (0.210 M). Since HClO is a weak acid, it partially dissociates in water, releasing hydrogen ions. The [H+] is equal to the HClO initial concentration multiplied by the ionization constant: [tex][H+] = 0.210 x 1.5 x 10-2 = 3.15 x 10-3[/tex]
The pH can be determined by the negative logarithm of the [tex][H+], or pH = -log[H+][/tex]. So, the initial pH of the titration is [tex]-log (3.15 x 10-3) = 2.50.[/tex]
As the titration proceeds, the pH will increase due to the addition of KOH, a strong base. The final pH of the titration can be calculated in the same manner. At the equivalence point, the [H+] is equal to the KOH initial concentration multiplied by the ionization constant:[tex][H+] = 0.210 x 1 = 0.210.[/tex]
The pH of the equivalence point is [tex]-log (0.210) = -1.67.[/tex] To summarize, the initial pH of the titration is 2.50 and the final pH of the titration is -1.67.
To know more about titration refer here:
https://brainly.com/question/2728613#
#SPJ11
a 67.0 ml aliquot of a 0.600 m stock solution must be diluted to 0.100 m. assuming the volumes are additive, how much water should be added?
To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, 402.0 ml of water must be added.
To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, the amount of water to be added can be calculated using the formula: M1V1 = M2V2.
M1 = 0.600 m, V1 = 67.0 ml, M2 = 0.100 m, V2 = Unknown
V2 = (M1V1) / M2
V2 = (0.600 x 67.0) / 0.100
V2 = 402.0
When a stock solution is diluted, it is mixed with a solvent such as water. The amount of solvent (in this case, water) to be added can be calculated using the above formula.
The initial volume (V1) and the concentration (M1) of the stock solution are known, while the final concentration (M2) and the final volume (V2) are unknown.
The formula can be used to calculate the amount of solvent to be added in order to reach the desired concentration.
The initial volume of the stock solution was 67.0 ml, and the initial concentration was 0.600 m. The desired concentration was 0.100 m.
When the formula was used, it was found that 402.0 ml of water must be added in order to reach the desired concentration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
Chemical equilibrium occurs when free energy exists in the _____.
highest possible value
lowest possible value
The statement that correctly defines chemical equilibrium is, "Chemical equilibrium occurs when free energy exists in the lowest possible value."
Chemical equilibrium is a state in which the forward and reverse chemical reactions take place at the same rate. The point at which this occurs is referred to as the equilibrium point.
The forward and backward reactions that result in chemical equilibrium continue to occur; they just occur at the same speed, resulting in no net change in the system's chemical concentration over time.
The Gibbs free energy of a chemical reaction determines the spontaneity of the reaction. If the ΔG value is positive, the reaction is non-spontaneous; if the ΔG value is negative, the reaction is spontaneous; and if the ΔG value is zero, the system is in equilibrium. In equilibrium, the free energy exists in the lowest possible value.
To learn more about chemical equilibrium refer: https://brainly.com/question/30884265
#SPJ11
a 2.90 m solution of methanol (ch3oh) in water has a density of 0.984 g/ml what are the a) mass percent, b) molarity, and c) mole percent of solute in this solution?
A 2.90 m solution of methanol (ch3oh) in water has a density of 0.984 g/ml has no mass percentage, The molarity of the solution is 0.000872 M and the mole percent of the solute in the solution is 0.0018%.
a) Mass percent
The mass percent of solute in the solution is the mass of the solute divided by the mass of the solution, then multiplied by 100. The mass percent of the solute in the given solution is computed below:
Mass of the solution = Volume of the solution × Density of the solution
= 2.90 L × 0.984 g/mL= 2.8476 g
Mass of the solute = Mass of the solution - Mass of water= 2.8476 g - (2.90 L × 1000 g/L) = -5.40 g
Mass percent = (mass of solute / mass of solution) × 100
= (-5.40 g / 2.8476 g) × 100= -189.89% (not possible)
Therefore, the mass percent of solute in the solution is not possible.
b) Molarity
The number of moles of solute present in the given solution is first calculated:
Molar mass of CH3OH = 12.01 + 3(1.01) + 16.00 = 32.04 g/mol
Mass of CH3OH in solution = Volume of solution × Density of solution × Mass percent of solute / 100
= 2.90 L × 0.984 g/mL × 2.89% / 100 = 0.0810 g
Moles of CH3OH in solution = mass of CH3OH / molar mass of CH3OH
= 0.0810 g / 32.04 g/mol= 0.00253 mol
Therefore, the molarity of the solution:
Molarity = Moles of solute / Volume of solution in liters
= 0.00253 mol / 2.90 L
=0.000872 M or 8.72 x 10^-4 Mc)
Therefore, the molarity of the solution is 0.000872 M or 8.72 x 10^-4 Mc)
c) Mole percent
The mole percent of the solute in the solution is computed as follows:
Mole fraction of solute = Moles of solute / Moles of solute + Moles of solvent
= 0.00253 / (0.00253 + 139.53)
= 0.000018 mole
Mole percent of solute = (mole fraction of solute × 100)
= (0.000018) × 100= 0.0018%
Therefore, the mole percent of the solute in the solution is 0.0018%.
For more such questions on methanol , Visit:
https://brainly.com/question/13630889
#SPJ11
is freezing an endothermic or exothermic process? how do you know?(1 point) responses freezing is exothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment. freezing is exothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment. freezing is exothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states. freezing is exothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states. freezing is endothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment. freezing is endothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment. freezing is endothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states. freezing is endothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states. brainly
The correct answer is "freezing is exothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment."
option B.
What happens to substance when it phase changes?When a substance undergoes a phase change, such as from a liquid to a solid, energy is either released or absorbed. Freezing is a phase change in which a liquid transforms into a solid.
During freezing, energy is released by the substance as it loses heat to its surroundings. This energy is released because the particles of the liquid slow down and come together to form the more ordered structure of a solid, which releases heat to its surroundings. Therefore, freezing is an exothermic process.
Learn more about freezing here: https://brainly.com/question/24314907
#SPJ1
The complete question is below:
Is freezing an endothermic or exothermic process? Choose the correct answer and explain your reasoning.
(a) Freezing is exothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment.
(b) Freezing is exothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment.
(c) Freezing is exothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states.
(d) Freezing is exothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states.
(e) Freezing is endothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment.
(f) Freezing is endothermic because as water bonds into ice, the energy from bond formation is released and heats up the surrounding environment.
(g) Freezing is endothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states.
(h) Freezing is endothermic because as water bonds into ice, the bonds absorb energy from the environment in order to change states.
an amount of medication of mg is found to result in a blood pressure of mm hg. what is the predicted blood pressure
The predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg would be 127.977 mm Hg.
What is regression line?The regression line is a straight line that is used to explain how a dependent variable (y) changes in response to the change in an independent variable (x) with the help of the slope and y-intercept. In other words, a regression line is an equation for a line of best fit for the given set of data.
The regression line equation is as follows: Y^ = a + bx Here, "a" represents the y-intercept, and "b" represents the slope of the regression line. We have given the equation of the regression line as follows: Y^ = 140 + (-0.0667)X. Now, we have been asked to find the predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg.
To find out the predicted blood pressure, we have to substitute the value of "X" in the regression line equation. Y^ = 140 + (-0.0667)X Y^ = 140 + (-0.0667)186 = 127.977.
Therefore, the predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg would be 127.977 mm Hg.
To know more about blood pressure click on below link:
https://brainly.com/question/4215574#
#SPJ11
complete question :
A medical researcher wants to determine how a new medication affects blood pressure.The equation of the regression line is Y^=140+(-0.0667)X
An amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg. What is the predicted blood pressure_____mm Hg.