Can anyone please name this compound?

The magnitude of the net force on the crate is 13 N.

Generally, in science, the word 'force' has a very precise meaning. Force is usually described as a push or a pull.

Generally the magnitude of the force is described as the number which is used to represent the strength of the force. Let's consider an example, suppose the force is equal to 10 N towards the east direction and 'towards east' indicates direction while '10' indicates the magnitude of the force. So we can say that basically, Magnitude is the 'value' or 'amount' of any physical quantity.

Here, assuming that the two forces are acting opposite,

Net force = 53 N - 40 N = 13 N

The given question is incomplete and the complete question is given in the image attached below.

Learn more about force from the link given below.

https://brainly.com/question/13191643

#SPJ1

Answer:

The correct answer is B

Explanation:

The rate constant and reaction are both increased

Hydro flow rolling pins HFO refrigerants classified as a A2L because they contain a fluorine.

Some Hydro Fluoro Olefin (HFO) refrigerants are classified as A2L according to the ASHRAE (American Society of Heating, Refrigerating, and Air-Conditioning Engineers) classification system for refrigerants. The "A" in A2L stands for "lower toxicity," and the "2" indicates "lower flammability."

The classification of refrigerants is based on their potential toxicity and flammability. A2L refrigerants are considered to have lower toxicity and lower flammability compared to other types of refrigerants. They have specific thermodynamic properties that make them suitable for use in refrigeration and air conditioning systems.

Fluorine makes HFO refrigerants less flammable than  hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs). which are highly flammable.  A2L refrigerants have lower global warming potential (GWP) and ozone depletion potential (ODP), which makes them a more sustainable choice for certain applications.

To know more about refrigerants here

https://brainly.com/question/28265596

#SPJ1

Hydro flow rolling pins HFO refrigerants are a type of refrigerant used in air conditioning systems. The 'a2L' is a safety classification from ASHRAE that indicates these refrigerants are mildly flammable but have lower flammability. Such classifications are used for safety considerations.

The Hydro flow rolling pins HFO refrigerants are designed for use in refrigeration and air conditioning systems. An HFO refrigerant is a hydrofluorolefin refrigerant; they are a new class of refrigerants that have a very low planet-warming potential.

The designation a2L is actually a safety classification set by ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) and it means that these refrigerants are mildly flammable but exhibit lower flammability. The '2' indicates that the refrigerant has low flammability and the 'L' means it has a lower burning velocity. These classifications inform technicians and engineers about the safety considerations they need to be aware of when handling and working with these substances.

https://brainly.com/question/32754819

#SPJ11

The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier.

The scientific study of inheritance and genes is covered in this page, along with details on the structure of DNA, chromosomes, gene variants, and the evolution of living beings and their genomes.

(1) The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier. (2) The probability that these parents will have an offspring affected with sickle cell anemia is 50 percent.  (3) The probability that their offspring would also be a carrier like them is 50 percent.

To know more about genetic, here:

https://brainly.com/question/30459739

#SPJ1

To measure the reaction heat more accurately at isobaric condition, we can add a lid to the calorimeter to prevent heat loss due to evaporation.

Thus, to measure the reaction heat more accurately at isobaric condition, some certain modifications can be made to the coffee cup calorimeter which includes adding a lid to the calorimeter to prevent heat loss due to evaporation to keep the pressure inside the calorimeter constant.

Using a magnetic stir bar to ensure even mixing of the reactants to ensure the accurate temperature readings, use of thermometer with a smaller stem to reduce the amount of heat transferred from the solution to the thermometer, etc. are some other modifications that can be made on the coffee cup calorimeter to measure the reaction heat more accurately at isobaric condition.

Learn more about the isobaric condition here:

https://brainly.com/question/13089696

#SPJ1

The why there are so many carbon-based compounds is that B. Carbon can form up to six bonds with other carbon atoms and atoms of other elements.

Carbon  can be described as the element that posses 4 electrons in its outermost shell,  and it has the asbility to gain or loss 4 electrons to so it can have  nobel gas configuration.

It should be noted that Catenation is one of the  unique ability of carbon  which help it to form bonds with other atoms of carbon  and due to this reason, it have the ability to record a long chains of different types of compounds.

Learn more about carbon at:

https://brainly.com/question/1301348

#SPJ1

The molar absorptivity of the solution is 1.093 L/(mol*cm).

The Beer-Lambert rule, which states that absorbance is equal to molar absorptivity (a constant that indicates how strongly a material absorbs light) times the substance's concentration times the length of the light's passage through the solution, describes this relationship.

We know that we can use the formula;

A = εcl

A = Absorbance

ε = absorptivity

c = concentration

l = path length

ε= A/cl

ε= 0.47/0.215 * 2

ε = 1.093 L/(mol*cm)

Learn more about absorbance:https://brainly.com/question/29439014

#SPJ1

The correct electron configuration for an atom of Magnesium (Mg) is 2, 7.

The distribution of electrons among an atom's or ion's energy levels and sublevels is referred to as electron configuration. It outlines how electrons are grouped in numerous shells and subshells surrounding an atom's nucleus.

The electron configuration is frequently expressed in shell and subshell notation, such as 1s², 2s², 2p⁶, 3s², 3p², where the numbers represent the energy level or shell and the letters s, p, d, and f represent the sublevels or orbitals inside each shell.

Find out more on electron configuration here: https://brainly.com/question/15489693

#SPJ1

The molar mass of 2.62 mol of iron(III) sulfate is 1050.8 g.

Thus, the molar mass of iron(III) sulfate can be calculated by summing the atomic masses of its constituent atoms. The molar mass of a compound is the sum of the atomic masses of all the atoms present in a chemical formula of the compound which is then multiplied by the number of atoms of each element in the formula.

In iron(III) sulfate, the atomic mass of iron will be 111.70 g/mol. The atomic masses of Sulphur and oxygen will be 96.18 g/mol and 192.0 g/mol, respectively. Adding atomic masses of its constituent atoms will be 400.88 g/mol. Therefore, the molar mass of 2.62 mol of iron(III) sulfate is 1050.8 g.

Learn more about the molar mass here:

https://brainly.com/question/17067547

#SPJ1

The percentage composition of the water of hydration for each compound is shown below.

The percentage of water of hydration, also known as percent water of crystallization, is a measure of the amount of water that is chemically bound to a salt or other compound as part of its crystal structure.

1) For CaSO4 * 2 H₂O

36/172 * 100/1

= 21%

For CoCl2 * 6 H₂O

108/238 * 100/1

= 45%

For CuSO4* 5 H2O

90/250 * 100/1

= 36%

For MgSO4 * 7 H₂O

126/246 * 100/1

= 51%

Learn more about hydration :https://brainly.com/question/14229407

#SPJ1

Answer:

In chemistry, a compound is a substance made up of two or more different chemical elements combined in a fixed ratio. When the elements come together, they react with each other and form chemical bonds that are difficult to break.

Explanation:

brainlist

The kinetic energy of the particles of a substance affected during a phase change is Kinetic energy does not change, but the potential energy does.

A phase change  can be described as the physical process  whereby the substance can be transformed from one phase to another.

It should be noted that the change do take place in a case whereby  you are adding  as well as removing heat  which can be considered as  melting point or the boiling point of the substance and this can be understood using phase change.

Learn more about phase change at:

https://brainly.com/question/29712919

#SPJ1

4.0 moles of Al₂O₃ will be form from 6.0 moles of O₂.

(2 moles Al₂O₃) / (3 moles O₂)

= (x moles Al₂O₃) / (6.0 moles O₂)

To solve for x, we can cross-multiply:

(2 moles Al₂O₃) * (6.0 moles of  O₂)

= (3 moles of O₂) * (x moles of Al₂O₃)

12.0 moles Al₂O₃ = 3x moles Al₂O₃

Now, divide both sides by 3:

x = 4.0 moles Al₂O₃

So, 4.0 moles of Al₂O₃ form from 6.0 moles of O₂.

Read more on chemical reactions here:https://brainly.com/question/11231920

#SPJ1

1-bromopropane can be converted to 2-bromopropane through a substitution reaction with sodium iodide in acetone.

One possible method to convert 1-bromopropane to 2-bromopropane is through a substitution reaction with sodium iodide (NaI) in acetone. The following procedure can be followed.

More on 1-bromopropane can be found here: https://brainly.com/question/31149600

#SPJ1

The molar solubility of CuS is 7.8 x 10⁻¹⁹ M.

The solubility product expression for CuS is:

Since CuS dissociates to form one Cu²⁺ ion and one S²⁻ ion, the molar solubility of CuS can be represented as x. Therefore, at equilibrium:

Substituting these values in the Ksp expression:

Solving for x, we get:

Therefore, the molar solubility of CuS is 7.8 x 10⁻¹⁹ M.

To learn more about molar solubility, here

https://brainly.com/question/28170449

#SPJ1

The complete question is:

Calculate the molar solubility, S , of CuS if it has a Ksp value of 6×10⁻³⁷.

The planets, moons, and smaller objects in the solar system have several characteristics are; Size, Composition, Orbits, Atmosphere, and Evolution.

Planets are generally much larger than moons and smaller objects in the solar system. For example, the largest planet in our solar system, Jupiter, has a diameter of about 143,000 kilometers, while the Moon, Earth's natural satellite, has a diameter of about 3,474 kilometers.

Planets are typically made up of a combination of rock and/or gas, while moons and smaller objects can have a variety of compositions. Moons can be rocky, icy, or a mix of both, while smaller objects such as asteroids and comets can also have diverse compositions including rock, metal, ice, and other materials.

Planets and moons have different orbits around the Sun or their respective planets. Planets orbit the Sun in nearly elliptical paths, while moons orbit their parent planet in elliptical or nearly circular orbits.

Planets and some moons can have substantial atmospheres, while smaller objects in the solar system may have little to no atmosphere. For example, Earth has a dense atmosphere composed mainly of nitrogen, oxygen, and trace gases, while the Moon has no significant atmosphere.

Planets, moons, and smaller objects in the solar system have different origins and evolutionary histories. Planets are thought to have formed from the solar nebula, a cloud of gas and dust left over from the formation of the Sun. Moons can form throuugh various mechanisms, such as accretion, capture, or giant impacts. Smaller objects, such as asteroids and comets, are remnants from the early solar system and can provide valuable information about its history and evolution.

To know more about solar system here

https://brainly.com/question/12075871

#SPJ1

105.0 mL of alcohol is dissolved in water and the solution is diluted to a total final volume of 250 mL the final concentration of ethanol in the solution is 0.00722 M.

To calculate the final concentration of ethanol in the solution, we need to know the amount of ethanol present in the solution before and after dilution. We can use the following formula to calculate the final concentration:

Cfinal = Cinitial x (Vinitial / Vfinal)

where Cinitial is the initial concentration of ethanol, Vinitial is the initial volume of the solution, Vfinal is the final volume of the solution, and Cfinal is the final concentration of ethanol.

First, let's find the initial concentration of ethanol in the solution. We know that 105.0 mL of alcohol is dissolved in water, but we don't know the concentration of the alcohol.

Let's assume that the alcohol is pure ethanol (which is not always the case in reality), which has a density of 0.789 g/mL at room temperature. Therefore, the mass of ethanol in 105.0 mL of alcohol is:

mass of ethanol = volume of alcohol x density of ethanol

= 105.0 mL x 0.789 g/mL

= 82.845 g

The molar mass of ethanol is 46.07 g/mol, so the number of moles of ethanol in 82.845 g of ethanol is:

moles of ethanol = mass of ethanol / molar mass of ethanol

= 82.845 g / 46.07 g/mol

= 1.797 mol

The initial volume of the solution is 105.0 mL, so the initial concentration of ethanol is:

Cinitial = moles of ethanol / initial volume of solution

= 1.797 mol / 105.0 mL

= 0.0171 M

Now, let's calculate the final concentration of ethanol. We know that the final volume of the solution is 250 mL. Using the formula above, we get:

Cfinal = Cinitial x (Vinitial / Vfinal)

= 0.0171 M x (105.0 mL / 250 mL)

= 0.00722 M

Therefore, the final concentration of ethanol in the solution is 0.00722 M.

For more details regarding ethanol, visit:

https://brainly.com/question/25002448

#SPJ1

(a). Sodium hydroxide: NaOH, aluminum hydroxide: [tex]Al(OH)_3[/tex]

(b). The parentheses are necessary for aluminum hydroxide because the hydroxide polyatomic ion has a subscript of 3, indicating that there are three hydroxide ions for every one aluminum ion.

a) The formula for sodium hydroxide is NaOH, and the formula for aluminum hydroxide is [tex]Al(OH)_3[/tex]

b) Aluminum hydroxide requires brackets because there are three hydroxide ions for every one aluminum ion, according to the hydroxide polyatomic ion's subscript of 3. Without the parentheses, it would be unclear whether the subscript of 3 applies to only the oxygen or to the entire hydroxide ion. By enclosing the entire hydroxide ion in parentheses and placing the subscript outside the parentheses.

To know more about aluminum ion, here

brainly.com/question/21373859

#SPJ1

Answer:

2.00 L of a gas is collected at 25.0°C and 745.0 mmHg

Explanation:

The mass percentage is an important method which is used to calculate the concentration of a solution. The amount of water needed to add in order to make 17.85 % NaCl solution is 230.1 g.

The mass percentage of a component in a solution is defined as the mass in grams of that component present per 100 g of the solution. The term mass percentage is denoted as w/w. It is used to calculate the concentration of a binary solution.

Mass percentage = Mass of the component in the solution / Total mass of solution × 100

17.85 = 50.0 / 50.0 + x × 100

0.1785 (50.0 + x) = 50.0

8.925 + 0.1785 x = 50.0

0.1785 x = 41.075

x = 230.1 g

Thus the amount of water added to make the solution is 230.1 g.

To know more about mass percentage, visit;

https://brainly.com/question/27429978

#SPJ2

Answer:

Chemical reactions in living things are the chemical processes that occur within living organisms to maintain their biological functions. These reactions are essential for metabolism, growth, reproduction, and response to stimuli. They involve the conversion of one or more substances into new substances with different physical and chemical properties.

Some examples of chemical reactions in living things include:

Cellular respiration: the process by which cells convert nutrients into energy in the form of ATP. This process involves the oxidation of glucose to produce carbon dioxide, water, and ATP.

Photosynthesis: the process by which plants and other organisms convert light energy into chemical energy in the form of glucose. This process involves the conversion of carbon dioxide and water into glucose and oxygen.

Digestion: the process by which food is broken down into simpler substances that can be absorbed and used by the body. This process involves the hydrolysis of complex carbohydrates, proteins, and lipids into simpler molecules such as glucose, amino acids, and fatty acids.

DNA replication: the process by which cells make copies of their DNA before cell division. This process involves the synthesis of new strands of DNA from existing strands.

Chemical reactions in living things are regulated by enzymes, which are biological catalysts that speed up chemical reactions by lowering the activation energy required for the reaction to occur. Enzymes are specific to particular substrates and are critical for the proper functioning of metabolic pathways. Any disruption in these chemical reactions can lead to metabolic disorders and diseases.

Explanation:

Kb for trimethylamine is 1.0 × 10^-2.5.

We can use the relationship between Kb and Ka for a conjugate acid-base pair:

Kb × Ka = Kw

The pKa is related to the pH :

pKa + pKb = 14.00

pKb = 14.00 - pKa

We can calculate the pKa using the relationship:

pH = pKa + log([base]/[acid])

Therefore, [base] = [acid], and we can simplify equation to:

pH = pKa + log(1)

Therefore, the pKa of trimethylammonium ion is 11.5.

Now :

Kb × Ka = Kw

Kb = Kw ÷ Ka

Since we know that Kw = [tex]1.0 * 10^{-14[/tex]and Ka =[tex]10^{-11.5[/tex] (from the pKa value we calculated earlier), we can substitute these values to get:

[tex]Kb = (1.0 * 10^{-14}) / (10^{-11.5}) = 1.0 * 10^{-2.5[/tex]

To know more about trimethylamine, here

brainly.com/question/14980991

#SPJ1

The Kp of the reaction is seen to be  1.75 * 10^4

A high Kp value indicates that the equilibrium is in favor of the products, whereas a low Kp value suggests that the equilibrium is in favor of the reactants.

The relative concentrations of reactants and products at equilibrium are shown  by the equilibrium constant.

We know that;

Kp = pSO3^2/pO2 . pSO2^2

Kp =(0.0166)^2/ 0.002930  (0.002318)^2

Kp = 2.8 * 10^-4/1.6 * 10^-8

Kp = 1.75 * 10^4

The Kp of the reaction is gotten as 1.75 * 10^4.

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

It is the primary source which helps the students to relate in a personal way to events of the past and promote a deeper understanding of history as a series of human events. The primary source is better, because it contains more charts. The correct option is B.

The sources which are closest to the origin of the information and contain raw information which must be interpreted by the researches are called the primary sources. The secondary sources are closely related to the primary sources and often interpret them.

A direct access to the subject of our research is given by the primary source whereas the secondary source provides only second hand information and comments of other researches.

Thus the correct option is B.

To know more about primary source, visit;

https://brainly.com/question/24172115

#SPJ1

When an equilibrium system is put under stress, Le Chatelier's principle may constitute used to forecast changes in equilibrium concentrations.

A rule that states that if a system is in equilibrium and a constraint is given to it (such as a change within pressure, temperature, or reactant concentration), the equilibrium will shift and tend to compensate for the effect caused by the constraint. This is  Le Chatelier's principle.

When an equilibrium system is put under stress, Le Chatelier's principle may constitute used to forecast changes in equilibrium concentrations. However, the adjustments required to reach equilibrium might not be as evident if we have a combination of reactants and byproducts that are still not at equilibrium.

To know more about Le Chatelier's principle, here:

https://brainly.com/question/29009512

#SPJ1

The mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg

The balanced equation for reaction between [tex]NO_2[/tex], oxygen, and water to form nitric acid :

[tex]4NO_2[/tex](g) + O2(g) + [tex]2H_2O[/tex](l) → [tex]HNO_3[/tex](aq)

Molar mass of [tex]NO_2[/tex] is 46.01 g/mol, so :

16 kg / 46.01 g/mol = 347.77 mol of [tex]NO_2[/tex]

We see that for every 4 moles of [tex]NO_2[/tex], 4 moles of [tex]HNO_3[/tex] are produced.

Therefore, number of moles of [tex]HNO_3[/tex] produced from 347.77 mol  [tex]NO_2[/tex] is:

moles of [tex]HNO_3[/tex] =[tex]4/4 * 347.77\ mol = 347.77\ mol[/tex]

The mass of [tex]HNO_3[/tex] produced is:

mass of [tex]HNO_3[/tex] = 347.77 mol x 63.01 g/mol = 21.92 kg

Rounding to two significant figures and including the appropriate units, the mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg.

To know more about balanced equation, here

brainly.com/question/7181548

#SPJ1

The heat capacity of a substance or system is defined as the amount of heat required to raise the temperature through 1°C. It is an extensive property and its value depends on the quantity of matter present.

The heat needed to raise the temperature of 1 gram of the substance through 1°C is the specific heat capacity.

Heat required is:

q = mc (T₂ - T₁)

m = V × ρ

q = (130 + 130) × 1.0 × 4.18 ( 30.5 - 21.8) = 9455.16 J

9455.16 J = 9.45516 kJ

To know more about heat capacity, visit;

https://brainly.com/question/29766819

#SPJ1

The value of K, for the decomposition of ammonia at 127 °C is 2.27x10⁻⁵

The Equilibrium Constant is denoted by K and it is a quantitative measure of the extent to which a chemical reaction reaches equilibrium.

It is defined as the ratio of the concentrations (or partial pressures) of the products to the concentrations (or partial pressures) of the reactants, with each concentration or partial pressure raised to a power equal to its stoichiometric coefficient in the balanced chemical equation.

For a general chemical equation:

aA + bB ⇌ cC + dD

The equilibrium constant expression is written as:

K =  [tex]\frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

where [A], [B], [C], and [D] represent the molar concentrations (or partial pressures) of the reactants and products at equilibrium, and a, b, c, and d represent their stoichiometric coefficients in the balanced chemical equation.

Back to our main question, the equilibrium constant for the reverse reaction (decomposition of ammonia) can be obtained from the equilibrium constant of the forward reaction (synthesis of ammonia) using the relationship:

Kreverse = 1 / Kforward

where Kforward is the equilibrium constant for the synthesis of ammonia.

Substituting the given value of Kforward:

Kreverse = 1 / 44005 = 0.0000227

In standard form, we have 2.27x10⁻⁵

Learn more about equilibrium constant here:

https://brainly.com/question/3159758

#SPJ1