certain reaction has an activation energy of 34.34 kj/mol. 34.34 kj / mol. at what kelvin temperature will the reaction proceed 3.00 3.00 times faster than it did at 357 k?

The pH of a 0.20 M acetic acid solution is 2.72.

The pH of a 0.20 M acetic acid solution can be calculated using the Ka of acetic acid, CH3COOH, which is 1.8 x 10-5.

We will use the equation for the dissociation of acetic acid to calculate the pH of the solution.

CH3COOH(aq) + H2O(l) ⇌ H3O+(aq) + CH3COO-(aq)

The equilibrium constant expression for the dissociation of acetic acid is given by

Ka = [H3O+][CH3COO-] / [CH3COOH].

Since we know the value of Ka and the initial concentration of acetic acid, we can solve for

the concentration of H3O+.Ka = [H3O+][CH3COO-] / [CH3COOH]

1.8 x 10-5 = [H3O+]2 / 0.20[H3O+]2 = 3.6 x 10-6[H3O+] = 1.9 x 10-3 M

The pH of the solution can then be calculated as:

pH = -log[H3O+]pH = -log(1.9 x 10-3)

pH = 2.72

Therefore, the pH of a 0.20 M acetic acid solution is 2.72.

To know more about pH, refer here:

https://brainly.com/question/30255888#

#SPJ11

Liquids and gases have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.

Liquids and gases are both physical states of matter and are similar in many ways according to the Kinetic Molecular Theory.

Both states of matter consist of particles that are in constant motion, and this motion is caused by the energy of these particles.

The particles in both liquids and gases have enough energy to move around freely and have very weak forces of attraction between them.

This means that they are both very fluid, and they can take the shape of their containers.

Despite these similarities, liquids and gases also differ in some important ways.

Gas particles have much more kinetic energy than liquid particles, which allows them to move faster and farther apart, making them less dense than liquids.

In addition, the forces of attraction between gas particles are weaker than those between liquid particles, so gas particles are more easily separated and spread out in their environment.

Finally, the viscosity of liquids is greater than the viscosity of gases, so liquids are more resistant to flow.

In conclusion, liquids and gases have many similarities in terms of the Kinetic Molecular Theory. However, they also have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.

to know more about liquid refer here:

https://brainly.com/question/9716973#

#SPJ11

The Ksp of lead (II) iodide is 7.1x10-9. If it is measured that the lead concentration in the solution is 0.0003 M, then what is the concentration of iodide in the solution is 1.5 x 10-5 M

Given, the Ksp of lead (II) iodide is 7.1x10-9.

The concentration of lead =

Ksp expression of lead (II) iodide is given as,

PbI2 ⇌ Pb2+ + 2I–Ksp = [Pb2+] [I-]2Here, [Pb2+] = 0.0003MIodide.

concentration:

Let’s consider x as the concentration of iodide.

The equilibrium expression of the dissolution of PbI2 is,

PbI2 ⇌ Pb2+ + 2I–Initial: 0 0

Change: -x +x + 2x

At equilibrium: (0-x) (0+ x) (2x)Ksp = [Pb2+] [I-]2= (0.0003) (2x)2= 7.1x10-9x = 1.5 x 10-5 M

The concentration of iodide in solution is 1.5 x 10-5 M.

An alternate method to solve the problem is using the quadratic equation. We can solve the equation as follows,      

Ksp = [Pb2+] [I-]2

= (0.0003) (2x)2

= 7.1x10-92x2

= 7.1x10-9/0.00032x2

= 79x = 1.5x10-5 M

Therefore, the iodide concentration in the solution is 1.5 x 10-5 M.

To know more about Lead concentration refer here:

https://brainly.com/question/30880405#

#SPJ11

In the certain molecule, the central atom has the one lone pair and five bonds. The electron pair geometry is the square pyramidal and molecular structure is square pyramidal.

The square pyramidal has  the 5 bonds and the 1 lone pair. The 1 lone pair will be sits on the bottom of the molecule and that will causes the repulsion of the rest of  bonds. This will result in that the bond angles are the all slightly lower than the 90°.

The molecule with the five bonding pairs and the one lone pair is designated as the AX5E and it has the total of the six electron pairs. The electron pair geometry is the square pyramidal and molecular geometry is square pyramidal.

To learn more about geometry here

https://brainly.com/question/28189901

#SPJ4

From the solubility curve:

According to the solubility curve for KNO₃, approximately 40 grams of KNO₃ can be dissolved at 50°C.

a. Since 45g of NaNO₃ in 100 g of water at 30°C is below the saturation point, the solution is unsaturated.

b. Since 60g of KClO3 in 100 g of water at 60°C is above the saturation point, the solution is supersaturated.

To determine how many grams of NaNO₃ are required to saturate 100 grams of water at 75°C, we need to look at the solubility curve for NaNO₃. At 75°C, approximately 75 grams of NaNO₃ can be dissolved in 100 grams of water. Therefore, to saturate 100 grams of water, we would need to add 75 grams of NaNO₃.

To find the temperature at which 25g of KClO₃ dissolves, we need to look at the solubility curve for KClO₃. At 25g, the curve intersects the solubility line at approximately 45°C, so 25g of KClO₃ would dissolve at 45°C.

Learn more on saturation point here: https://brainly.com/question/23866986

#SPJ1

Answer:

1) 492 grams Na3PO4

2) 1,476 grams Na3PO4

Explanation:

6.0 mol NaOH forms 3.0 mol Na3PO4

9.0 mole H3PO4 forms 9.0 mol Na3PO4.

What mass of Na3PO4 forms?

1)  6.0 moles of NaOH

3.0 moles of Na3PO4 are formed.  Convert thism into grams using the molar mass conversion factor:  164 g/mole

(3.0 moles Na3PO4)*(164 g/mole Na3PO4) = 492 grams

2)  9.0 moles of H3PO4

9.0 moles of Na3PO4 are formed.  Again, use the molar mass conversion factor.

(9.0 moles Na3PO4)*(164 g/mole Na3PO4) = 1,476 grams Na3PO4

The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:

Cu²⁺(aq) + 2e⁻ → Cu(s)

1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).

2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).

3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.

4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.

5. To confirm this, we can check the other options provided:

a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction

b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron

c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction

So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).

to know more about half-reaction refer here:

https://brainly.com/question/13109589#

#SPJ11

Answer:

c.no is a correct answer

If the balloon is popped and all of the CO2 is released, approximately 5.4 grams of CO2 would be released.

At STP (Standard Temperature and Pressure), the pressure is 1 atmosphere (atm) and the temperature is 273.15 K (0 °C or 32 °F).Any ideal gas has a molar volume of 22.4 L/mol at STP.

Carbon dioxide (CO2) seems to have a molar mass of approximately 44 g/mol.

Using the ideal gas law, PV = nRT, we can calculate the number of moles of CO2 in the balloon:

PV = nRT

n = PV/RT

n = (1 atm)(3 L)/(0.0821 L·atm/mol·K)(273.15 K)

n = 0.1226 mol

Therefore, the balloon contains 0.1226 mol of CO2.

To calculate the mass of CO2, we can use the following formula:

mass equates to the number of moles multiplied by the molar massmass = 0.1226 mol x 44 g/mol

mass = 5.4 g

To know more about ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1

The value of the constant, k, for this data is 51.5.

option D.

To determine the constant k, we can use the formula:

PV = k

where;

We can rearrange the formula to solve for k:

k = PV

Now, we can multiply the pressure and volume values for each data point to get the corresponding value of k:

For the first data point: k = 1.15 kg/cm² x 44.8 mL = 51.52

For the second data point: k = 1.24 kg/cm² x 41.5 mL = 51.40

For the third data point: k = 1.47 kg/cm² x 35.0 mL = 51.45

We can take the average of these values to get an overall value for k:

k = (51.52 + 51.40 + 51.45) / 3 = 51.46 ≈ 51.5

Learn more about constant here: https://brainly.com/question/27983400

#SPJ1

In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446

#SPJ11

The reaction scheme is as follows:

Styrene (monomer) + Azobisisobutyronitrile (initiator) →  Radical polymers + Nitrile groups

Radical polymers then undergo combination or disproportionation as the possible modes of termination:

Combination:

Radical polymers + Radical polymers → Polystyrene (end product)

Disproportionation:

Radical polymers → Polystyrene + Styrene (monomer)

Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.

During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.

These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,

where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.

Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.

This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.

The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.

to know more about styrene refer here:

https://brainly.com/question/14546335#

#SPJ11

Evaporation is a different term for it. As particles move more quickly than liquid molecules, a liquid needs energy to transform into a gas.

vaporisation is the process by which a substance is transformed from its liquid or solid state into its gaseous (vapour) state. Boiling is the term for the vaporisation process when conditions permit the creation of gas bubbles within a liquid. Sublimation is the process of directly converting a solid into a vapour.

The ratio of the time needed to evaporate a testing solvent to the time needed to evaporate a reference solvent under the same circumstances is the evaporation rate. The findings can be shown as either a percentage of the total amount evaporated within a given time frame, the amount of time needed to evaporate, or a relative rate.

To know more about energy visit:

https://brainly.com/question/8630757

#SPJ1

The number of moles of sodium hydroxide present in the sample, is 0.00839 moles.

To calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution, use the following equation:

Moles = concentration (M) x volume (L)

Moles = 0.315 M x 0.02680 L

Moles = 0.00839 moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.

To explain this in further detail, moles are a unit of measurement for an amount of substance and are typically expressed as mol. A mole is equal to 6.02 x 10^23 atoms or molecules, and is represented by the letter 'n' or 'N'.

The concentration of a solution is a measure of the amount of solute dissolved in a given volume of solvent and is expressed in molarity (M). Volume is expressed in litres (L).

By multiplying the concentration of a solution (0.315 M) by the volume of the sample (0.02680 L).

Sodium hydroxide, also known as lye, is a highly reactive and caustic inorganic compound. It is commonly used in soap and detergent production, as well as in the paper and textile industries.

It is also used in the production of a variety of other chemicals, including pharmaceuticals and food additives.

To know more about  Sodium hydroxide refer here:

https://brainly.com/question/29327783#

#SPJ11

Because of the addition of one electron, the effective nuclear charge falls and repulsion rises, causing electrons to be further apart and therefore increasing atomic size. We also know that anion has a bigger size than the parent atom, therefore Br- will have the highest atomic size.

The radius of the bromide ion Br- is greater.

Anions are more massive than their parent atoms. The anion's extra electron increases electron-electron repulsion. Since electrons spread out further in space, an anion has a wider radius than its parent atom.

Bromine belongs to the halogen group, which also contains fluorine, chlorine, iodine, and astatine.

learn more about bromide

https://brainly.com/question/29228517

#SPJ1

Answer:

C

Explanation: Your welcome

The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.

The Arrhenius equation is

[tex]k = A e^{-\frac{E_a}{RT}}[/tex]

where:

k is the rate constant is the pre-exponential factor

Ea is the activation energy

R is the gas constant

T is the temperature in Kelvin

According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.

The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.

Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.

To learn more about activation energy refer - brainly.com/question/14776335

#SPJ11

Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.

The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.

To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

Know more about mass here:

https://brainly.com/question/14014782

#SPJ11

The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:

First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.

To know more about pH  click on below link :

https://brainly.com/question/491373#

#SPJ11

The type of bond responsible for holding two water molecules together, creating the properties of water, is a polar covalent bond.

Explanation: The type of bond that is responsible for holding two water molecules together, creating the properties of water is hydrogen bond.What is a hydrogen bond?A hydrogen bond is a type of chemical bond that exists between two electrically polar molecules. Hydrogen bonds are much weaker than covalent or ionic bonds, but they do serve a significant purpose in both organic and inorganic chemistry. Example of a hydrogen bond, one example of a hydrogen bond is found in between two water molecules. Each water molecule is composed of two hydrogen atoms and one oxygen atom, and each hydrogen atom is bonded covalently to the oxygen. However, the shared electrons are not distributed evenly between the two atoms. Because oxygen is more electronegative than hydrogen, it pulls electrons away from the hydrogen atoms, resulting in a slight charge imbalance within the molecule. The oxygen atom in one water molecule is therefore attracted to the hydrogen atoms in another water molecule. This attraction produces a hydrogen bond between the two molecules, which helps to hold them together.

For more such questions on polar covalent bond

https://brainly.com/question/13560841

#SPJ11

The best method to separate a 1:1 mixture of aniline and ethylbenzene is through

distillation

.

Distillation is a process that involves heating the mixture to its boiling point, which causes the components to vaporize. As the vapors cool and condense, the liquid components will separate into their pure forms.

Since the boiling points of aniline and

ethylbenzene

differ significantly Aniline boiling point: 184°C; Ethylbenzene boiling point: 135°C.

The process of distillation involves heating the mixture in a distillation apparatus.

As the temperature increases, the vaporized components of the mixture will travel up a condenser and then be collected separately in two separate flasks.

During this process,

aniline

will be the first component to vaporize and travel up the condenser, while ethylbenzene will follow suit.

The two components will condense in their respective flasks and can then be collected and isolated.

In conclusion,

Distillation is the best method to separate a 1:1 mixture of aniline and ethylbenzene due to the fact that it utilizes their differences in boiling points to allow for the collection of the two components in their pure forms.

This is achieved by heating the mixture in a distillation apparatus and condensing the vapors in two separate flasks.

to know more about

distillation

refer here:

https://brainly.com/question/29037176#

#SPJ11

When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.

Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.

Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.

Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.

To know more about molecules, here

brainly.com/question/4745152

#SPJ4

--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--

When 32.0 g of H2 and 12.0 g of O2 are mixed and allowed to react to form water, the end result will be 44.0 g of H2O.

This is because the equation for the reaction is 2H2 + O2 = 2H2O, so for every two grams of H2 that are present, one gram of O2 must be present to balance the equation. Therefore, 32.0 g of H2 and 12.0 g of O2 will result in 44.0 g of H2O.
To solve this problem, first calculate the amount of H2 and O2 needed to create the desired amount of H2O. Using the equation, the ratio of H2 to O2 is 2:1, so the total amount of O2 needed to react with the given amount of H2 is 16.0 g (32.0 g of H2 divided by 2). Next, calculate the amount of H2O that will be produced. To do this, use the equation 2H2 + O2 = 2H2O, so the total amount of H2O produced is twice the amount of H2 and O2, or 44.0 g (32.0 g of H2 + 16.0 g of O2 = 48.0 g, then divided by 2 = 24.0 g).
Therefore, when 32.0 g of H2 and 12.0 g of O2 are mixed and allowed to react to form water, the end result will be 44.0 g of H2O.

For more such questions on H2O

https://brainly.com/question/26709403

#SPJ11

Answer:

Methane is a compound that consists of one carbon atom and four hydrogen atoms per molecule. Methane decomposes into two simpler substances, hydrogen and carbon. Therefore, methane is a compound.

What is Methane?

Methane is a colorless, odorless, and flammable gas that has a molecular formula of CH4. Methane is the primary component of natural gas, which is formed from the decay of organic matter deep beneath the Earth's surface.

Methane is a potent greenhouse gas that is more effective at trapping heat than carbon dioxide, despite the fact that it does not remain in the atmosphere for as long.

A component is a pure substance that cannot be separated into simpler substances by physical or chemical methods. Elements and compounds are the two types of components.

Elements are the simplest forms of matter and cannot be separated into simpler substances by chemical means. On the other hand, compounds are made up of two or more elements in definite proportions and can be separated into simpler substances by chemical means.

Thus, methane is a compound.



Learn more about compounds and elements here:

https://brainly.com/question/13516179#



#SPJ11

The new volume of the gas is approximately 29.5 L when the temperature is raised to 350K and the pressure is lowered to 1.5 atm.

To solve this problem, we can use the combined gas law, which states that,

(P1 × V1) / T1 = (P2 × V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We can plug in the given values to get,

(2.3 atm × 17 L) / 299 K = (1.5 atm × V2) / 350 K

Solving for V2,

V2 = (2.3 atm × 17 L × 350 K) / (1.5 atm × 299 K)

V2 = 29.5 L

To know more about volume, here

brainly.com/question/20319705

#SPJ4

When a salt such as PbCl2 is added to water, it dissolves because of the attraction between the positively charged Pb2+ ions and the negatively charged Cl− ions and the polar nature of water molecules.

Water molecules' oxygen atoms have a partially negative charge, while their hydrogen atoms have a partially positive charge.

When a solid salt like PbCl2 dissolves in water, water molecules surround each ion and dissolve it by breaking apart the ionic bond that holds the ions together.

When a solid dissolves in water, the concentration of ions in the solution increases. When PbCl2 dissolves in water, it creates one Pb2+ ion and two Cl- ions.

Adding water to PbCl2 increases the concentration of ions.The solubility of PbCl2 in water is directly proportional to the amount of chloride ions present.

In the presence of water, the equilibrium in the following reaction shifts to the right: PbCl2(s) → Pb2+(aq) + 2Cl−(aq)

This results in an increase in the number of ions in the solution and a corresponding decrease in the solubility of the salt, indicating that the chloride ion concentration increases as more water is added.

to know more about molecules refer here:

https://brainly.com/question/19922822#

#SPJ11

To compare the 0.5 M sucrose solution and the 90.5 M glucose solution, we need to consider their concentrations, which are measured in moles per liter (M).

For the 0.5 M sucrose solution, we know that it contains 0.5 moles of sucrose per liter of solution. The molecular mass of sucrose is 342 g/mol, so we can calculate the mass of sucrose in one liter of solution as follows:

0.5 moles/L × 342 g/mol = 171 g/L

Therefore, the 0.5 M sucrose solution contains 171 g of sucrose per liter of solution.

For the 90.5 M glucose solution, we know that it contains 90.5 moles of glucose per liter of solution. The molecular mass of glucose is 180 g/mol, so we can calculate the mass of glucose in one liter of solution as follows:

90.5 moles/L × 180 g/mol = 16,290 g/L

Therefore, the 90.5 M glucose solution contains 16,290 g of glucose per liter of solution.

From these calculations, we can see that the 90.5 M glucose solution is much more concentrated than the 0.5 M sucrose solution. However, the two solutions cannot be directly compared in terms of their effects on biological systems or their properties, as the properties of a solution depend on many factors such as solubility, osmotic pressure, and chemical interactions with other molecules.

To know more about molecular mass here

https://brainly.com/question/3182776

#SPJ4

The radius of a single atom of a generic element x is 123 picometers (pm) and a crystal of x has a unit cell that is body-centered cubic. So, the volume of the unit cell is 11.5482 x 10⁻²⁴ cm³.

Given,

The radius of a single atom of a generic element x is 123 picometers (pm) and a crystal of x has a unit cell that is body-centered cubic.

Body-Centered Cubic (BCC):

In a Body-Centered Cubic unit cell, each corner of the cube has a corner atom, and there is an additional atom in the center of the cube. The atom that is centered on the unit cell is surrounded by eight neighboring atoms, each of which is located at a distance of

4R/√3,

where R is the radius of the atom.

The volume of the unit cell = (4 * radius of the atom)^3/3

For BCC, volume of the unit cell is

(4 * radius of the atom)^3/3

= (4 * 123 pm)^3/3

= 11.5482 x 10⁻²⁴ cm³

The volume of the unit cell is 11.5482 x 10⁻²⁴ cm³.

For more such questions on volume , Visit:

https://brainly.com/question/29493123

#SPJ11

The correct answer is C. Silicon and Germanium are semiconductor elements. A semiconductor is a material that has properties of both an insulator and a conductor.

It can be used to create transistors, which are components that can be used to amplify or switch electronic signals.

Semiconductor elements are made up of different atoms that have at least four electrons in their outer shell. The four electrons are what gives them their semi-conductive properties.

Silicon and Germanium are two of the most common semiconductor elements.

Silicon is the most widely used semiconductor element. It has four electrons in its outer shell and is found in nature as a component of sand and quartz.

Silicon has the ability to easily form bonds with other atoms, which makes it a great choice for semiconductor devices.

Germanium is also a commonly used semiconductor element. It has four electrons in its outer shell and is a component of coal and many other minerals.

Germanium has a slightly higher electron mobility than Silicon, which makes it better suited for certain types of transistors.

In conclusion, Silicon and Germanium are semiconductor elements. They have four electrons in their outer shell and are used in transistors and other semiconductor devices.

Silicon is the most widely used semiconductor element due to its ability to form strong bonds with other atoms, while Germanium is better suited for certain types of transistors due to its higher electron mobility.

to know more about semiconductor refer here:

https://brainly.com/question/15184439#

#SPJ11

Orange waves have a lower frequency and contain less energy than green waves.

What is Wave?

A wave is a disturbance or oscillation that travels through space and time, accompanied by the transfer of energy without the transfer of matter. Waves can take many different forms, including sound waves, light waves, water waves, and seismic waves. They can be described in terms of their frequency, wavelength, amplitude, and velocity, among other properties. Waves play a fundamental role in many areas of science and technology, including communication, medicine, and engineering.

The energy of a wave is directly proportional to its frequency, which means that higher frequency waves contain more energy than lower frequency waves. The frequency of a wave refers to the number of complete cycles or oscillations that the wave undergoes per second, and is measured in units of Hertz (Hz).

Learn more about Wave from the given link

https://brainly.com/question/26116832

#SPJ1