Torque:-
[tex]\\ \rm\Rrightarrow \tau =14(0.018)[/tex]
[tex]\\ \rm\Rrightarrow \tau=0.25Nm[/tex]
option B
Given that the radius of the moon is roughly one-quarter that of the earth, find the mass of the moon in terms of the mass of the earth
The mass of the moon is six times lower in terms of the mass of the earth because of the its lower size and shape.
What is the mass of the moon and earth?The mass of the moon is 7.34767309 × 1022 kilograms while on the other hand, the mass of the earth is 5.97219 × 1024 kilograms. This difference is due to the lower radius of the moon as compared to earth.
So we can conclude that the mass of the moon is six times lower in terms of the mass of the earth because of the its lower size and shape.
Learn more about radius here: https://brainly.com/question/12908707
what direction can Earth's plates move
The movement of the plates creates three types of tectonic boundaries: convergent, where plates move into one another; divergent, where plates move apart; and transform, where plates move sideways in relation to each other. They move at a rate of one to two inches (three to five centimeters) per year.
What resource is used to make fertilizers and other products such as toothpaste and insecticides?
Coal
Limestone
Phosphate
Silica
Answer:
Silica
Explanation:
The most commonly used abrasives are hydrated silica (softened silica), calcium carbonate (also known as chalk), and sodium bicarbonate (baking soda).
Why is it more common to see a lunar eclipse than a solar eclipse?.
Answer:
Lunar eclipses are more widely visible because Earth casts a much larger shadow on the Moon during a lunar eclipse than the Moon casts on Earth during a solar eclipse.
Following a lecture on transverse and longitudinal waves, four students make venn diagrams to characterize these waves. which venn diagram is correct? a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string, created by a disturbance and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium. the overlapping region has entries has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium. the overlapping region has entries, created by a disturbance, has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, all parts of the electromagnetic spectrum, vibrating string, medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and can travel through a vacuum. the overlapping region has entries, created by a disturbance, has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, all parts of the electromagnetic spectrum and travel faster in a denser medium. the overlapping region has entries, created by a disturban
Venn diagram B is correct. A Venn diagram is a type of graph that uses circles to depict connections between objects or fixed groups of entities.
What Is a Venn Diagram and how does It Work?A Venn diagram is a diagram that uses circles to depict relationships between objects or finite groups of objects. Circles that overlap share characteristics, whereas circles that do not overlap do not.
A Venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular.
The circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium.
The overlapping region has entries, created by a disturbance, has speed, and travels through solids.
Hence Venn diagram B is correct
To learn more about the Venn Diagram refer to the link;
https://brainly.com/question/1703814
If there were no external forces acting on the two pucks, their complex motion could be described as the combination of the uniform linear motion of the center of mass and a uniform circular motion of the pucks about the center of mass. Describe how well your results agree with this expectation, and explain any deviations that you observe from the predicted behavior
The absence of external forces will make the pucks move in the form of a uniform circular motion.
What is a circular motion?It should be noted that a circular motion simply means the movement of an object along the circumference of the circle.
In this case, the absence of external forces will make the pucks move in the form of a uniform circular motion.
If the friction is absent, the pucks will continue to move on the same path due to the first law of Newton and the law of conversation of energy. In this case,the results will match the predictions until there's loss in energy.
Learn more about circular motion on:
https://brainly.com/question/106339
2. Describe asteroids and their orbits in the solar system.
Asteroids, often known as minor planets, are stony, airless leftovers of our solar system's early development about 4.6 billion years ago.
The majority of this ancient space junk may be found in the main asteroid belt, orbiting the Sun between Mars and Jupiter. Asteroids range in size from Vesta, the largest at 329 miles (530 kilometers) in diameter, to asteroids as small as 33 feet (10 meters). The cumulative mass of all asteroids is less than that of the Earth's Moon.
Both Transverse and Longitudinal Waves transmit____and not_____
A power, work
B work, power
C energy, matter
D matter, energy
Explanation:
How are animals similar? All animals are made of many cells. Most animals can move on their own. Like all living things, animals grow, change, reproduce, and respond to their environment.
If a peregrine falcon dove at its maximum speed for half a mile to catch prey, how many seconds would the dive take? (round your answer to the nearest second. ) correct answer9
The number of seconds that the dive will take if peregrine falcon dove at its maximum speed for half a mile is 9 seconds.
How to calculate the time?From the complete information, it was stated that the peregrine falcon can reach speed of up to 200 miles per hour.
Therefore, the number of seconds that the dice would take for half a mile will be calculated thus:
1 hour = 200 miles
3600 seconds = 200 miles
1 second will be: = (200/3600) = 0.056 miles
Therefore, the time will be:
200miles / 1 hour = 0.x
x = 0.0025 hours
Therefore, 0.0025 hours will be:
= 0.0025 × 3600
= 9 seconds.
Learn more about time taken on:
https://brainly.com/question/4931057
The voltage across the secondary winding is 10,000 v, and the voltage across the primary winding is 25,000 v. if the primary winding has 200 coils, how many coils are in the secondary winding? 50 coils 80 coils 125 coils 500 coils
Answer: 80 coils
Explanation for 80 coils: voltage across the secondary winding is 10,000 V, and the voltage across the primary winding is 25,000 V. If the primary winding has 200 coils, how many coils are in the secondary winding...The voltage across the primary winding is 6000 V!
What is the ultimate fate of an isolated white dwarf?.
Answer:
It will cool down and become a cold black dwarf.
Explanation:
The electron degeneracy pressure slowly overwhelms gravity, and the white dwarf evaporates. As gravity overwhelms the electron degeneracy pressure, it will explode as a nova.
If the body temperature of a person is recorded as 37°C, what is the person’s body temperature in K? Round your answer to the nearest whole number.If the body temperature of a person is recorded as 37°C, what is the person’s body temperature in K? Round your answer to the nearest whole number.
a wind turbine is an example of what kind of device
a. a generator
b. a transformer
c. a motor
d. an electromagnet
Answer:
it’s an example of a generator.
Explanation:
Answer:
Generator
Explanation:
valid
A hockey puck of mass 150 g is sliding south along the ice and slows at a rate of 1.2m/s2. What is the net force acting on the puck?
Answer: another force on puck?
Force is a vector quantity characterized by the rate of change of momentum.
Mathematically, it is the product of mass and acceleration.
F = m × a
=> F = (150/1000) × (-1.2)
=> F = -0.18 kg m/s²
=> F = -0.18 N
If you were standing on the edge of a thunderstorm as it begins to form, would the wind be blowing into the storm or out of it? why?
When going 70 mph, it takes how many feet to stop, including reaction time
Answer:
Speed: 70 mph
Reaction Distance: 103 feet
Breaking Distance: 245 feet
Explanation:
the red lines on this
national weather
service weather map
connect areas of equal
air pressure. what do
meteorologists call
these lines?
a. isobars
b. cold fronts
c. air masses
d. isotherms
4. Point B on a wheel of radius 40 cm that is rotating at a constant 5. 0 revolutions
per second is located 0. 20 m from the axis of rotation. Pont A is just at the border
of the wheel. See the figure.
a) What is the angular velocity of the wheel in rad/s?
b) What point has a greater linear speed, A or B? Calculate both speeds and
compare the results.
c) What are the centripetal accelerations of points A and B due to the spin of the
wheel? Sketch the situation and represent the vectors linear velocity and
centripetal acceleration in points A and B. Assume the rotation of the wheel
to be clockwise.
Answer:
SD
Explanation:
The speed of sound in a guitar string is 430 m/s. for the musical note b, the frequency of the string when plucked is 246.94 hz.
Based on the speed and frequency, the wavelength of sound in the guitar is 1.74 m
What is the relationship between speed, frequency and wavelength of sound?The speed of sound in a medium is the distance in metres it covers per second.
The frequency of sound is the number of complete oscillations per second.
The wavelength of sound is the distance between adjacent identical parts of the sound.
The relationship between speed, frequency and wavelength of sound is given below:
wavelength = speed/frequencyThe wavelength of sound in the guitar will be:
wavelength = 430/246.94
wavelength = 1.74 m
Therefore, the wavelength of sound in the guitar is 1.74 m
Learn more about wavelength of sound at: https://brainly.com/question/6916860
Consider the following statements. A. Heat flows from an object in liquid state to an object in solid state; B. Heat flows from an object with higher thermal energy to one with lower thermal energy; C. Heat flows from an object at higher temperature to an object at lower temperature. Which statements are true? 1. A and B only 2. C only 3. None is true. 4. All are true. 5. A and C only 6. A only 7. B and C only 8. B only
The following statements regarding heat transfer are true:
Heat flows from an object with higher thermal energy to one with lower thermal energyHeat flows from an object at higher temperature to an object at lower temperatureWhat is heat transfer?Heat transfer is the movement of heat from one body to another due to difference in temperature between the bodies and its surroundings.
Heat transfer occurs in every body which is made up of atoms and molecules.
However, heat can only be transferred from regions of higher temperature to lower temperature.
Therefore, the following statements regarding heat transfer are true:
Heat flows from an object with higher thermal energy to one with lower thermal energyHeat flows from an object at higher temperature to an object at lower temperature.Learn more about heat transfer at: https://brainly.com/question/13433948
A physician is going to use high-frequency electromagnetic radiation to treat cancer in a patient. Which is a claim about this event?(1 point)
A wave model is most useful for describing the frequency of the radiation.
Using gamma rays is the best to treat cancer because they act like particles.
The radiation will destroy the cells by transferring energy to them.
All of the cancer cells in the targeted region will be destroyed by the radiation.
Answer:
The answer is B
Explanation:
This is the only statement that is opinionated, therefore it is the only claim.
Answer: A wave model is most useful for describing the frequency of the radiation
Explanation:
I just took the test
Don’t actually comment on this unless you are willing to help!
Describe how we receive colors from the various object observed in our world. Discuss how we receive colors from objects... https://brainly.com/question/27082331
What property of an object determines how much inertia it has.
Answer:
Inertia is that quantity which depends solely upon mass. The more mass, the more inertia. Momentum is another quantity in Physics which depends on both mass and speed.
Explanation:
Uranus and neptune have methane clouds but jupiter and saturn do not. Which factor explains why?.
Answer:
Temperature on Jupiter and Saturn are too high for methane to condense.
Explanation:
However, methane can condense on Uranus and Neptune because they are farther from the sun and hence colder.
what is the weight of an object (on earth) that has a mass of 4.5kg
weight=
mass=
gravity=
formula:
substitution:
answer:
Answer:
weight-44.1 kg- mass-4.5kg gravity-9.8 formula-(see explanation)
Explanation:
force/weight on earth is = mass x gravitational field strength
5. A mass attached to a spring oscillates and completes 50 full cycles in 30 s. What is the time period and frequency of this system?
Please show all of your work.
frequency:
⇒ oscillation / time taken
⇒ 50 / 30
⇒ 5 / 3
⇒ 1.667
≈ 1.7 Hz
period:
⇒ 1 / frequency
⇒ 1 / 1.7 ( when taken frequency as 5/3, period is 0.6 s )
⇒ 0.6 seconds
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{50}{30}=\dfrac{5}{3}=1.67Hz[/tex]
Time period::
[tex]\\ \rm\rightarrowtail \dfrac{1}{\nu}[/tex]
[tex]\\ \rm\rightarrowtail \dfrac{1}{1.67}[/tex]
[tex]\\ \rm\rightarrowtail 0.7s[/tex]
which change of state is shown in the photo
A) Liquid to solid
B) Liquid to gas
C) Gas to liquid
D) Solid and liquid
The change of state that is shown here is from solid to liquid. The correct option is D.
What is states of matter?A state of matter is one of the various forms that matter can take in physics. In everyday life, four states of matter are visible: solid, liquid, gas, and plasma.
In most environments, matter can exist in three distinct physical states: solid, liquid, and gas. In extreme environments, other states such as plasma, Bose-Einstein condensate, and neutron stars may exist.
Here in the given image, ice which is a solid is getting transformed into water i.e., liquid, so it can be considered that the phase is transforming from solid to liquid.
Thus, the correct option is D.
For more details regarding states of matter, visit:
https://brainly.com/question/9402776
#SPJ1
Two solenoids have the same cross-sectional area and length, but the first one has twice as many turns per unit length as the second. The ratio of the self-inductance of the second solenoid to that of the first is.
Answer:
2:1
Explanation:
5)A 0.50 kg hockey puck is at rest on ice when you hit it with a hockey stick, applying a force of 100 N for
0.10 seconds. The puck then slides across the ice, where the coefficient of kinetic friction is 0.20. After
sliding for 4 seconds, the puck collides with a 0.80 kg box of donuts. The puck immediately comes to rest
after the collision. How far will the box of donuts slide before coming to rest if the coefficient of friction
between the box and the ice is 0.30.
Answer:
F t = m Δv impulse delivered = change in momentum
Δv = 100 * .1 / .5 = 20 m/s original speed of puck
KE = 1/2 m v^2 = .5 * 20^2 / 2 = 100 J initial KE of puck
E = μ m g d energy lost by puck
Ff = μ m g = m a deceleration of puck due to friction
a = μ g = 9.8 * .2 = 1.96 m/s^2
v2 = a t + v1 = -1.96 * 4 + 20 = 12.2 m/s speed of puck on striking box
m v2 = M V conservation of momentum when puck strikes box
V = m v2 / M = 12.2 * .5 / .8 = 7.63 m/s speed of box after collision
KE = 1/2 M V^2 = .8 * 7.63^2 / 2 = 23.3 J KE of box after collision
KE = μ M g d energy lost by box in sliding distance d
d = 23.3 / (.3 * .8 * 9.8) = 9.91 m distance box slides
When the string on a violin vibrates, waves move in both directions along the string, interfering with each other. Sometimes these wave
interact to make nodes and antinodes. What are these kinds of waves called? (1 point)
A.) Superposition waves
B.) Frequency waves
C.) Electromagnet waves
D.) Standing Waves
When the string on a violin vibrates, waves move in both directions along the string, interfering with each other. These waves are standing waves (Option D).
What are Standing Waves?The Standing Waves are waves generated due to the vibrational frequency that produces reflected waves capable of interfering with the incident waves.
Standing Waves generates a pattern of waves that form a standing still, it is for that reason of the name.
The nodes and antinodes of the standing waves are found elsewhere in the medium where waves form.
Learn more about Standing Waves here:
https://brainly.com/question/26427527
Answer:
Standing waves
Explanation: