In case A, the tennis ball exerts a greater force on the wall.
When comparing the forces exerted by the tennis ball on the wall in case A and case B, it is important to consider the collision time. In case A, where the collision time is 0.15 seconds, the force exerted by the tennis ball on the wall is greater than in case B, where the collision time is 0.20 seconds.
The force exerted by an object can be calculated using the equation F = (m * Δv) / Δt, where F is the force, m is the mass of the object, Δv is the change in velocity, and Δt is the change in time. In this case, the mass of the tennis ball remains constant.
As the collision time increases, the change in time (Δt) in the denominator of the equation becomes larger, resulting in a smaller force exerted by the tennis ball on the wall. Conversely, when the collision time decreases, the force increases.
Therefore, in case A, with a collision time of 0.15 seconds, the tennis ball exerts a greater force on the wall compared to case B, where the collision time is 0.20 seconds.
Learn more about denominator.
brainly.com/question/32621096
#SPJ11
Example: The intensity of a 3 MHz ultrasound beam entering
tissue is 10 mW/cm2 . Calculate the intensity at a depth of 4 cm in
soft tissues?
It can be calculated using the formula, Intensity = Initial Intensity * e^(-2αx) where α is the attenuation coefficient of the tissue and x is the depth of penetration..The intensity of a 3 MHz ultrasound beam is 10 mW/cm2
To calculate the intensity at a depth of 4 cm in soft tissues, we need to know the attenuation coefficient of the tissue at that frequency. The attenuation coefficient depends on various factors such as tissue composition and ultrasound frequency.Once the attenuation coefficient is known, we can substitute the values into the formula and solve for the intensity at the given depth. The result will provide the intensity at a depth of 4 cm in soft tissues based on the initial intensity of 10 mW/cm2.
To learn more about intensity , click here : https://brainly.com/question/31037615
#SPJ11
2. For each pair of systems, circle the one with the larger entropy. If they both have the same entropy, explicitly state it. a. 1 kg of ice or 1 kg of steam b. 1 kg of water at 20°C or 2 kg of water at 20°C c. 1 kg of water at 20°C or 1 kg of water at 50°C d. 1 kg of steam (H₂0) at 200°C or 1 kg of hydrogen and oxygen atoms at 200°C Two students are discussing their answers to the previous question: Student 1: I think that 1 kg of steam and 1 kg of the hydrogen and oxygen atoms that would comprise that steam should have the same entropy because they have the same temperature and amount of stuff. Student 2: But there are three times as many particles moving about with the individual atoms not bound together in a molecule. I think if there are more particles moving, there should be more disorder, meaning its entropy should be higher. Do you agree or disagree with either or both of these students? Briefly explain your reasoning.
a. 1 kg of steam has the larger entropy. b. 2 kg of water at 20°C has the larger entropy. c. 1 kg of water at 50°C has the larger entropy. d. 1 kg of steam (H2O) at 200°C has the larger entropy.
Thus, the answers to the question are:
a. 1 kg of steam has a larger entropy.
b. 2 kg of water at 20°C has a larger entropy.
c. 1 kg of water at 50°C has a larger entropy.
d. 1 kg of steam (H₂0) at 200°C has a larger entropy.
Student 1 thinks that 1 kg of steam and 1 kg of hydrogen and oxygen atoms that make up the steam should have the same entropy because they have the same temperature and amount of stuff. Student 2, on the other hand, thinks that if there are more particles moving around, there should be more disorder, indicating that its entropy should be higher.I agree with student 2's reasoning. Entropy is directly related to the disorder of a system. Higher disorder indicates a higher entropy value, whereas a lower disorder implies a lower entropy value. When there are more particles present in a system, there is a greater probability of disorder, which results in a higher entropy value.
To know more about entropy:
https://brainly.com/question/20166134
#SPJ11
Explain in detail why a photon's wavelength must increase when
it scatters from a particle at rest.
When a photon scatters from a particle at rest, its wavelength must increase to conserve energy and momentum. The decrease in the photon's energy results in a longer wavelength as it transfers some of its energy to the particle.
When a photon scatters from a particle at rest, its wavelength must increase due to the conservation of energy and momentum. Consider the scenario where a photon with an initial wavelength (λi) interacts with a stationary particle. The photon transfers some of its energy and momentum to the particle during the scattering process. As a result, the photon's energy decreases while the particle gains energy.
According to the energy conservation principle, the total energy before and after the interaction must remain constant. Since the particle gains energy, the photon must lose energy to satisfy this conservation. Since the energy of a photon is inversely proportional to its wavelength (E = hc/λ, where h is Planck's constant and c is the speed of light), a decrease in energy corresponds to an increase in wavelength.
Learn more about ”wavelength” here:
brainly.com/question/28466888
#SPJ11
1. With sound waves, pitch is related to frequency. (T or F) 2. In a water wave, water move along in the same direction as the wave? (T or F) 3. The speed of light is always constant? (T or F) 4. Heat can flow from cold to hot (T or F) 5. Sound waves are transverse waves. (T or F) 6. What is the definition of a wave? 7. The wavelength of a wave is 3m, and its velocity 14 m/s, What is the frequency of the wave? 8. Why does an objects temperature not change while it is melting?
1. True: With sound waves, pitch is related to frequency.
2. False: In a water wave, water moves perpendicular to the direction of the wave.
3. True: The speed of light is always constant.
4. False: Heat flows from hot to cold.
5. False: Sound waves are longitudinal waves.
6. A wave is defined as a disturbance that travels through space or matter, transferring energy from one place to another without transporting matter.
7. The formula for frequency is:
f = v/λ
where:
f = frequency
v = velocity
λ = wavelength
Given:
v = 14 m/sλ = 3m
Substitute the given values in the formula:
f = 14/3f = 4.67 Hz
Therefore, the frequency of the wave is 4.67 Hz.
8. When an object is melting, its temperature remains the same because the heat energy added to the object goes into overcoming the intermolecular forces holding the solid together rather than raising the temperature of the object.
Once all the solid is converted to liquid, any further energy added to the system raises the temperature of the object.
This is known as the heat of fusion or melting.
Learn more about temperature from this link:
https://brainly.com/question/23905641
#SPJ11
A laser beam is normally incident on a single slit with width 0.630 mm. A diffraction pattern forms on a screen a distance 1.20 m beyond the slit. The width of the central maximum is 2.38 mm. Calculate the wavelength of the light (in nm).
"The wavelength of the light is approximately 1.254 nm." The wavelength of light refers to the distance between successive peaks or troughs of a light wave. It is a fundamental property of light and determines its color or frequency. Wavelength is typically denoted by the symbol λ (lambda) and is measured in meters (m).
To calculate the wavelength of the light, we can use the formula for the width of the central maximum in a single slit diffraction pattern:
w = (λ * L) / w
Where:
w is the width of the central maximum (2.38 mm = 0.00238 m)
λ is the wavelength of the light (to be determined)
L is the distance between the slit and the screen (1.20 m)
w is the width of the slit (0.630 mm = 0.000630 m)
Rearranging the formula, we can solve for the wavelength:
λ = (w * w) / L
Substituting the given values:
λ = (0.000630 m * 0.00238 m) / 1.20 m
Calculating this expression:
λ ≈ 1.254e-6 m
To convert this value to nanometers, we multiply by 10^9:
λ ≈ 1.254 nm
Therefore, the wavelength of the light is approximately 1.254 nm.
To know more about wavelength visit:
https://brainly.com/question/29798774
#SPJ11
An organ pipe is open on one end and closed on the other. (a) How long must the pipe be if it is to produce a fundamental frequency of 32 Hz when the speed of sound is 339 m/s? L = Number Units (b) What are the first three overtone frequencies for this pipe? List them in order.
The first three overtones of the pipe are 96 Hz, 160 Hz, and 224 Hz.
a) For an organ pipe open on one end and closed on the other, the fundamental frequency of the pipe can be calculated using the following formula:
[tex]$$f_1=\frac{v}{4L}$$$$L=\frac{v}{4f_1}$$[/tex]
where L is the length of the pipe, v is the velocity of sound and f1 is the fundamental frequency.
Therefore, substituting the given values, we obtain:
L = (339/4) / 32
= 2.65 meters
Therefore, the length of the pipe should be 2.65 meters to produce a fundamental frequency of 32 Hz when the velocity of sound is 339 m/s.
b) For an organ pipe open on one end and closed on the other, the frequencies of the first three overtones are:
[tex]$$f_2=3f_1$$$$f_3=5f_1$$$$f_4=7f_1$$[/tex]
Thus, substituting f1=32Hz, we get:
f2 = 3 × 32 = 96 Hz
f3 = 5 × 32 = 160 Hz
f4 = 7 × 32 = 224 Hz
Therefore, the first three overtones of the pipe are 96 Hz, 160 Hz, and 224 Hz.
To learn more about pipe visit;
https://brainly.com/question/31180984
#SPJ11
In a charge-to-mass experiment, it is found that a certain particle travelling at 7.0x 106 m/s is deflected in a circular arc of radius 43 cm by a magnetic field of 1.0×10− 4 T. The charge-to-mass ratio for this particle, expressed in scientific notation, is a.b ×10cdC/kg. The values of a,b,c and d are and (Record your answer in the numerical-response section below.) Your answer:
In a charge-to-mass experiment, a certain particle traveling at 7.0x10^6 m/s is deflected in a circular arc of radius 43 cm by a magnetic field of 1.0x10^-4 T.
We can determine the charge-to-mass ratio for this particle by using the equation for the centripetal force.The centripetal force acting on a charged particle moving in a magnetic field is given by the equation F = (q * v * B) / r, where q is the charge of the particle, v is its velocity, B is the magnetic field, and r is the radius of the circular path.
In this case, we have the values for v, B, and r. By rearranging the equation, we can solve for the charge-to-mass ratio (q/m):
(q/m) = (F * r) / (v * B)
Substituting the given values into the equation, we can calculate the charge-to-mass ratio.
To learn more about charge-to-mass click here : brainly.com/question/13586133
#SPJ11
Find the magnitude of the electric field where the vertical
distance measured from the filament length is 34 cm when there is a
long straight filament with a charge of -62 μC/m per unit
length.
E=___
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force.
The magnitude of the electric field where the vertical distance measured from the filament length is 34 cm when there is a long straight filament with a charge of -62 μC/m per unit length is 2.22x10^5 N/C. Therefore, E= 2.22 x 10^5 N/C. A charged particle placed in an electric field experiences an electric force. The magnitude of the electric field is defined as the force per unit charge that acts on a positive test charge placed in that field. The electric field is represented by E.
The electric field is a vector quantity, and the direction of the electric field is the direction of the electric force acting on the test charge. The electric field is a function of distance from the charged object and the amount of charge present on the object. The electric field can be represented using field lines. The electric field lines start from the positive charge and end at the negative charge. The electric field due to a long straight filament with a charge of -62 μC/m per unit length is given by, E = (kλ)/r
where, k is Coulomb's constant = 9 x 109 N m2/C2λ is the charge per unit length
r is the distance from the filament
E = (9 x 109 N m2/C2) (-62 x 10-6 C/m) / 0.34 m = 2.22 x 105 N/C
To know more about electric field visit:
https://brainly.com/question/30544719
#SPJ11
A mass attached to the end of a spring is oscillating with a period of 2.25s on a horontal Inctionless surface. The mass was released from restat from the position 0.0460 m (a) Determine the location of the mass att - 5.515 m (b) Determine if the mass is moving in the positive or negative x direction at t-5515. O positive x direction O negative x direction
a) The location of the mass at -5.515 m is not provided.
(b) The direction of motion at t = -5.515 s cannot be determined without additional information.
a)The location of the mass at -5.515 m is not provided in the given information. Therefore, it is not possible to determine the position of the mass at that specific point.
(b) To determine the direction of motion at t = -5.515 s, we need additional information. The given data only includes the period of oscillation and the initial position of the mass. However, information about the velocity or the phase of the oscillation is required to determine the direction of motion at a specific time.
In an oscillatory motion, the mass attached to a spring moves back and forth around its equilibrium position. The direction of motion depends on the phase of the oscillation at a particular time. Without knowing the phase or velocity of the mass at t = -5.515 s, we cannot determine whether it is moving in the positive or negative x direction.
To accurately determine the direction of motion at a specific time, additional information such as the amplitude, phase, or initial velocity would be needed.
To learn more about mass click here
brainly.com/question/86444
#SPJ11
Fifteen identical particles have various speeds. One has a speed of 4.00 m/s, two have a speed of 5.00 m/s, three have a speed of 7.00 m/s, four have a speed of 5.00 m/s, three have a speed of 10.0 m/s and two have a speed of 14.0 m/s. Find (a) the average speed, (b) the rms speed, and (c) the most probable speed of these particles. (a) 7.50 m/s; (b) 8.28 m/s; (c) 14.0 m/s (a) 7.50 m/s; (b) 8.28 m/s; (c) 5.00 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 14.0 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 5.00 m/s Page 24 of 33
The correct answers are (a) 7.53 m/s, (b) 8.19 m/s, and (c) 5.00 m/s. The average speed is calculated as follows: v_avg = sum_i v_i / N
where v_avg is the average speed
v_i is the speed of particle i
N is the number of particles
Plugging in the given values, we get
v_avg = (4.00 m/s + 2 * 5.00 m/s + 3 * 7.00 m/s + 4 * 5.00 m/s + 3 * 10.0 m/s + 2 * 14.0 m/s) / 15
= 7.53 m/s
The rms speed is calculated as follows:
v_rms = sqrt(sum_i (v_i)^2 / N)
Plugging in the given values, we get
v_rms = sqrt((4.00 m/s)^2 + 2 * (5.00 m/s)^2 + 3 * (7.00 m/s)^2 + 4 * (5.00 m/s)^2 + 3 * (10.0 m/s)^2 + 2 * (14.0 m/s)^2) / 15
= 8.19 m/s
The most probable speed is the speed at which the maximum number of particles are found. In this case, the most probable speed is 5.00 m/s.
Learn more about rms speed here:
brainly.com/question/33262591
#SPJ11
An evacuated tube uses an accelerating voltage of 31.1 KV to accelerate electrons from rest to hit a copper plate and produce x rays. Non-relativistically, what would be the speed of these electrons?
An evacuated tube uses an accelerating voltage of 31.1 KV to accelerate electrons from rest to hit a copper plate and produce x rays.velocity^2 = (2 * 31,100 V * (1.6 x 10^-19 C)) / (mass)
To find the speed of the electrons, we can use the kinetic energy formula:
Kinetic energy = (1/2) * mass * velocity^2
In this case, the kinetic energy of the electrons is equal to the work done by the accelerating voltage.
Given that the accelerating voltage is 31.1 kV, we can convert it to joules by multiplying by the electron charge:
Voltage = 31.1 kV = 31.1 * 1000 V = 31,100 V
The work done by the voltage is given by:
Work = Voltage * Charge
Since the charge of an electron is approximately 1.6 x 10^-19 coulombs, we can substitute the values into the formula:
Work = 31,100 V * (1.6 x 10^-19 C)
Now we can equate the work to the kinetic energy and solve for the velocity of the electrons:
(1/2) * mass * velocity^2 = 31,100 V * (1.6 x 10^-19 C)
We know the mass of an electron is approximately 9.11 x 10^-31 kg.
Solving for velocity, we have:
velocity^2 = (2 * 31,100 V * (1.6 x 10^-19 C)) / (mass)
Finally, we can take the square root to find the speed of the electrons.
To know more about accelerating refer here:
https://brainly.com/question/32899180#
#SPJ11
Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C. Please report the mass of ice in kg to 3 decimal places. Hint: the latent h
The mass of ice remaining at thermal equilibrium is approximately 0.125 kg, assuming no heat loss or gain from the environment.
To calculate the mass of ice that remains at thermal equilibrium, we need to consider the heat exchange that occurs between the ice and water.
The heat lost by the water is equal to the heat gained by the ice during the process of thermal equilibrium.
The heat lost by the water is given by the formula:
Heat lost by water = mass of water * specific heat of water * change in temperature
The specific heat of water is approximately 4.186 kJ/(kg·°C).
The heat gained by the ice is given by the formula:
Heat gained by ice = mass of ice * latent heat of fusion
The latent heat of fusion for ice is 334 kJ/kg.
Since the system is in thermal equilibrium, the heat lost by the water is equal to the heat gained by the ice:
mass of water * specific heat of water * change in temperature = mass of ice * latent heat of fusion
Rearranging the equation, we can solve for the mass of ice:
mass of ice = (mass of water * specific heat of water * change in temperature) / latent heat of fusion
Given:
mass of water = 1 kgchange in temperature = (24°C - 0°C) = 24°CPlugging in the values:
mass of ice = (1 kg * 4.186 kJ/(kg·°C) * 24°C) / 334 kJ/kg
mass of ice ≈ 0.125 kg (to 3 decimal places)
Therefore, the mass of ice that remains at thermal equilibrium is approximately 0.125 kg.
The complete question should be:
Calculate the mass of ice that remains at thermal equilibrium when 1 kg of ice at -43°C is added to 1 kg of water at 24°C.
Please report the mass of ice in kg to 3 decimal places.
Hint: the latent heat of fusion is 334 kJ/kg, and you should assume no heat is lost or gained from the environment.
To learn more about thermal equilibrium, Visit:
https://brainly.com/question/14556352
#SPJ11
C. Density Determination - Measurement (pyrex beaker, ruler or meter stick, wood block) 1) Design an experiment to find out the density of the wood block using only a beaker, water, and a meter stick. Do not use a weighing scale for this part. 2) Design a second, different experiment to measure the density of the wood block. You can use a weighing scale for this part. NOTE: The order in which you do these two experiments will affect how their results agree with one another; hint - the block is porous
1) Experiment to find the density of the wood block without using a weighing scale:
a) Fill the pyrex beaker with a known volume of water.
b) Measure and record the initial water level in the beaker.
c) Carefully lower the wood block into the water, ensuring it is fully submerged.
d) Measure and record the new water level in the beaker.
e) Calculate the volume of the wood block by subtracting the initial water level from the final water level.
f) Divide the mass of the wood block (obtained from the second experiment) by the volume calculated in step e to determine the density of the wood block.
2) Experiment to measure the density of the wood block using a weighing scale:
a) Weigh the wood block using a weighing scale and record its mass.
b) Fill the pyrex beaker with a known volume of water.
c) Measure and record the initial water level in the beaker.
d) Carefully lower the wood block into the water, ensuring it is fully submerged.
e) Measure and record the new water level in the beaker.
f) Calculate the volume of the wood block by subtracting the initial water level from the final water level.
g) Divide the mass of the wood block by the volume calculated in step f to determine the density of the wood block.
Comparing the results from both experiments will provide insights into the porosity of the wood block. If the density calculated in the first experiment is lower than in the second experiment, it suggests that the wood block is porous and some of the water has been absorbed.
For more questions like Density click the link below:
brainly.com/question/17990467
#SPJ11
Questions 7.39 Homework. Unanswered ★ A pendulum is fashioned out of a thin bar of length 0.55 m and mass 1.9 kg. The end of the bar is welded to the surface of a sphere of radius 0.11 m and mass 0.86 kg. Find the centre of mass of the composite object as measured in metres from the end of the bar without the sphere. Type your numeric answer and submit
The center of mass of the composite object, consisting of the bar and sphere, is approximately 0.206 meters from the end of the bar. This is calculated by considering the individual centers of mass and their weighted average based on their masses.
To find the center of mass of the composite object, we need to consider the individual center of masses of the bar and the sphere and calculate their weighted average based on their masses.
The center of mass of the bar is located at its midpoint, which is L/2 = 0.55 m / 2 = 0.275 m from the end of the bar.
The center of mass of the sphere is at its geometric center, which is at a distance of R/2 = 0.11 m / 2 = 0.055 m from the end of the bar.
Now we calculate the weighted average:
Center of mass of the composite object = ([tex]m_bar[/tex] * center of mass of the bar + [tex]m_bar[/tex] * center of mass of the sphere) / ([tex]m_bar + m_sphere[/tex])
Center of mass of the composite object = (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) / (1.9 kg + 0.86 kg)
To solve the expression (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) / (1.9 kg + 0.86 kg), we can simplify the numerator and denominator separately and then divide them.
Numerator: (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) = 0.5225 kg⋅m + 0.0473 kg⋅m = 0.5698 kg⋅m
Denominator: (1.9 kg + 0.86 kg) = 2.76 kg
Now we can calculate the expression:
(0.5698 kg⋅m) / (2.76 kg) ≈ 0.206 m
Therefore, the solution to the expression is approximately 0.206 meters.
To know more about the center of mass refer here,
https://brainly.com/question/8662931#
#SPJ11
A diatomic ideal gas occupies 4.0 L and pressure of 100kPa. It is compressed adiabatically to 1/4th its original volume, then cooled at constant volume back to its original temperature. Finally, it is allowed to isothermally expand back to
its original volume.
A. Draw a PV diagram B. Find the Heat, Work, and Change in Energy for each process (Fill in Table). Do not assume anything about the net values to fill in the
values for a process.
C. What is net heat and work done?
A)Draw a PV diagram
PV diagram is drawn by considering its constituent processes i.e. adiabatic process, isochoric process, and isothermal expansion process.
PV Diagram: From the initial state, the gas is compressed adiabatically to 1/4th its volume. This is a curve process and occurs without heat exchange. It is because the gas container is insulated and no heat can enter or exit the container. The second process is cooling at a constant volume. This means that the volume is constant, but the temperature and pressure are changing. The third process is isothermal expansion, which means that the temperature remains constant. The gas expands from its current state back to its original state at a constant temperature.
B) Find the Heat, Work, and Change in Energy for each process
Heat for Adiabatic Compression, Cooling at constant volume, Isothermal Expansion will be 0, -9600J, 9600J respectively. work will be -7200J, 0J, 7200J respectively. Change in Energy will be -7200J, -9600J, 2400J.
The Heat, Work and Change in Energy are shown in the table below:
Process Heat Work Change in Energy
Adiabatic Compression 0 -7200 J -7200 J
Cooling at constant volume -9600 J 0 -9600 J
Isothermal Expansion 9600 J 7200 J 2400 J
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion= 7200 J + (-7200 J) = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion= -9600 J + 9600 J = 0
C) What is net heat and work done?
The net heat and work done are both zero.
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion = 0
Therefore, the net heat and work done are both zero.
Learn more about work: https://brainly.in/question/22847362
#SPJ11
When one person shouts at a football game, the sound intensity level at the center of the field is 60.8 dB. When all the people shout together, the intensity level increases to 88.1 dB. Assuming that each person generates the same sound intensity at the center of the field, how many people are at the game?
Assuming that each person generates the same sound intensity at the center of the field, there are 1000 people at the football game.
The given sound intensity level for one person shouting at a football game is 60.8 dB and for all the people shouting together, the intensity level is 88.1 dB.
Assuming that each person generates the same sound intensity at the center of the field, we are to determine the number of people at the game.
I = P/A, where I is sound intensity, P is power and A is area of sound waves.
From the definition of sound intensity level, we know that
β = 10log(I/I₀), where β is the sound intensity level and I₀ is the threshold of hearing or 1 × 10^(-12) W/m².
Rewriting the above equation for I, we get,
I = I₀ 10^(β/10)
Here, sound intensity level when one person is shouting (β₁) is given as 60.8 dB.
Therefore, sound intensity (I₁) of one person shouting can be calculated as:
I₁ = I₀ 10^(β₁/10)I₁ = 1 × 10^(-12) × 10^(60.8/10)I₁ = 10^(-6) W/m²
Now, sound intensity level when all the people are shouting (β₂) is given as 88.1 dB.
Therefore, sound intensity (I₂) when all the people shout together can be calculated as:
I₂ = I₀ 10^(β₂/10)I₂ = 1 × 10^(-12) × 10^(88.1/10)I₂ = 10^(-3) W/m²
Let's assume that there are 'n' number of people at the game.
Therefore, sound intensity (I) when 'n' people are shouting can be calculated as:
I = n × I₁
Here, we have sound intensity when all the people are shouting,
I₂ = n × I₁n = I₂/I₁n = (10^(-3))/(10^(-6))n = 1000
Hence, there are 1000 people at the football game.
Learn more about sound intensity https://brainly.com/question/14349601
#SPJ11
Enter only the last answer c) into moodle.
A solid sphere of mass M and radius R rolls without slipping to the right with a linear speed of v
a) Find a simplified algebraic expression using symbols only for the tolal kinetic energy Kior of the ball in terms of M and R
b) IfM = 7.5 kg. R = 10,8 cm and v = 4.5 m/s find the moment of inertia of the bail.
c) Plug in the numbers from part b) into your formula from part a) to get the value of the total kinetic energy
The total kinetic energy of the rolling ball, taking into account both its translational and rotational kinetic energy, is approximately 100.356 Joules. This is calculated by considering the mass, linear speed, radius, moment of inertia, and angular velocity of the ball.
a) The total kinetic energy of the rolling ball can be expressed as the sum of its translational kinetic energy and rotational kinetic energy.
The translational kinetic energy (Kt) is given by the formula: Kt = 0.5 * M * v^2, where M is the mass of the ball and v is its linear speed.
The rotational kinetic energy (Kr) is given by the formula: Kr = 0.5 * I * ω^2, where I is the moment of inertia of the ball and ω is its angular velocity.
Since the ball is rolling without slipping, the linear speed v is related to the angular velocity ω by the equation: v = R * ω, where R is the radius of the ball.
Therefore, the total kinetic energy (Kior) of the ball can be expressed as: Kior = Kt + Kr = 0.5 * M * v^2 + 0.5 * I * (v/R)^2.
b) To find the moment of inertia (I) of the ball, we can rearrange the equation for ω in terms of v and R: ω = v / R.
Substituting the values, we have: ω = 4.5 m/s / 0.108 m = 41.67 rad/s.
The moment of inertia (I) can be calculated using the equation: I = (2/5) * M * R^2.
Substituting the values, we have: I = (2/5) * 7.5 kg * (0.108 m)^2 = 0.08712 kg·m².
c) Plugging in the values from part b) into the formula from part a) for the total kinetic energy (Kior):
Kior = 0.5 * M * v^2 + 0.5 * I * (v/R)^2
= 0.5 * 7.5 kg * (4.5 m/s)^2 + 0.5 * 0.08712 kg·m² * (4.5 m/s / 0.108 m)^2
= 91.125 J + 9.231 J
= 100.356 J.
Therefore, the total kinetic energy of the ball, with the given values, is approximately 100.356 Joules.
learn more about "inertia":- https://brainly.com/question/1140505
#SPJ11
In the case of a time-varying force (ie. not constant), the
A© is the area under the force vs. time curve.
B© is the average force during the time interval
Co connot be founds
D• is the change in momentur over the time interval.
In the case of a time-varying force (ie. not constant), is the change in momentum over the time interval. The correct option is D.
The assertion that "A is the area under the force vs. time curve" is false. The impulse, not the work, is represented by the area under the force vs. time curve.
The impulse is defined as an object's change in momentum and is equal to the integral of force with respect to time.
The statement "B is the average force during the time interval" is false. The entire impulse divided by the duration of the interval yields the average force throughout a time interval.
The assertion "C cannot be found" is false. Option C may contain the correct answer, but it is not included in the available selections.
Thus, the correct option is D.
For more details regarding force, visit:
https://brainly.com/question/30507236
#SPJ4
Why must hospital personnel wear special conducting shoes while working around oxygen in an operating room?What might happen if the personnel wore shoes with rubber soles?
Hospital personnel must wear special conducting shoes in operating rooms to prevent the buildup of static electricity, which could potentially ignite the highly flammable oxygen. Wearing shoes with rubber soles increases the risk of static discharge and should be avoided to ensure the safety of everyone in the operating room.
Hospital personnel must wear special conducting shoes while working around oxygen in an operating room because oxygen is highly flammable and can ignite easily. These special shoes are made of materials that conduct electricity, such as leather, to prevent the buildup of static electricity.
If personnel wore shoes with rubber soles, static electricity could accumulate on their bodies, particularly on their feet, due to the friction between the rubber soles and the floor. This static electricity could then discharge as a spark, potentially igniting the oxygen in the operating room.
By wearing conducting shoes, the static electricity is safely discharged to the ground, minimizing the risk of a spark that could cause a fire or explosion. The conducting materials in these shoes allow any static charges to flow freely and dissipate harmlessly. This precaution is crucial in an environment where oxygen is used, as even a small spark can lead to a catastrophic event.
To know more about friction visit:
https://brainly.com/question/28356847
#SPJ11
On a day when the speed of sound is 345 m/s, the fundamental frequency of a particular stopped organ pipe is 220 Hz. The second overtone of this pipe has the same wavelength as the third harmonic of an open pipe. How long is the open pipe? Express your answer in mm
The length of the open pipe can be determined by comparing the wavelength of the third harmonic of the open pipe to the second overtone of the stopped organ pipe.
The fundamental frequency of a stopped organ pipe is determined by the length of the pipe, while the frequency of a harmonic in an open pipe is determined by the length and speed of sound. In this case, the fundamental frequency of the stopped organ pipe is given as 220 Hz.
The second overtone of the stopped organ pipe is the third harmonic, which has a frequency that is three times the fundamental frequency, resulting in 660 Hz (220 Hz × 3). The wavelength of this second overtone can be calculated by dividing the speed of sound by its frequency: wavelength = speed of sound / frequency = 345 m/s / 660 Hz = 0.5227 meters.
Now, we need to find the length of the open pipe that produces the same wavelength as the third harmonic of the stopped organ pipe. Since the open pipe has a fundamental frequency that corresponds to its first harmonic, the wavelength of the third harmonic in the open pipe is four times the length of the pipe. Therefore, the length of the open pipe can be calculated by multiplying the wavelength by a factor of 1/4: length = (0.5227 meters) / 4 = 0.1307 meters.
Finally, to express the length in millimeters, we convert the length from meters to millimeters by multiplying it by 1000: length = 0.1307 meters × 1000 = 130.7 mm. Hence, the length of the open pipe is 130.7 mm.
To learn more about wavelength.
Click here:brainly.com/question/29548846
#SPJ11
Diamagnets have the property that they "dampen" the effects of an external magnetic field by creating an opposing magnetic field. The diamagnet thus has an induced dipole moment that is anti-aligned, such that the induced north pole is closer to the north pole creating the external field. An application of this is that diamagnets can be levitated (Links to an external site.).
Now, the mathematics of generally describing a force by a non-uniform field on a dipole is a little beyond the scope of this course, but we can still work through an approximation based on energy. Essentially, whenever the theoretical loss of gravitational potential energy from "falling" no longer can "pay the cost" of increasing the magnetic potential energy, the object no longer wants to fall.
Suppose a diamagnetic object floats above the levitator where the magnitude of the magnetic field is 18 T, which is inducing* a magnetic dipole moment of 3.2 μA⋅m2 in the object. The magnetic field 2.0 mm below the object is stronger with a magnitude of 33 T. What is the approximate mass of the floating object?
Give your answer in units of g (i.e., x10-3 kg), and use g = 9.81 m/s2. You may assume the object's size is negligible.
The approximate mass of the floating object is approximately 37.99 grams.
To solve this problem, we can use the concept of potential energy. When the diamagnetic object floats above the levitator, the gravitational potential energy is balanced by the increase in magnetic potential energy.
The gravitational potential energy is by the formula:
[tex]PE_gravity = m * g * h[/tex]
where m is the mass of the object, g is the acceleration due to gravity, and h is the height from the reference point (levitator) to the object.
The magnetic potential energy is by the formula:
[tex]PE_magnetic = -μ • B[/tex]
where μ is the magnetic dipole moment and B is the magnetic field.
In equilibrium, the gravitational potential energy is equal to the magnetic potential energy:
[tex]m * g * h = -μ • B[/tex]
We can rearrange the equation to solve for the mass of the object:
[tex]m = (-μ • B) / (g • h)[/tex]
Magnetic dipole moment [tex](μ) = 3.2 μA⋅m² = 3.2 x 10^(-6) A⋅m²[/tex]
Magnetic field above the object (B1) = 18 T
Magnetic field below the object (B2) = 33 T
Height (h) =[tex]2.0 mm = 2.0 x 10^(-3) m[/tex]
Acceleration due to gravity (g) = 9.81 m/s²
Using the values provided, we can calculate the mass of the floating object:
[tex]m = [(-3.2 x 10^(-6) A⋅m²) • (18 T)] / [(9.81 m/s²) • (2.0 x 10^(-3) m)][/tex]
m = -0.03799 kg
To convert the mass to grams, we multiply by 1000:
[tex]m = -0.03799 kg * 1000 = -37.99 g[/tex]
Since mass cannot be negative, we take the absolute value:
m ≈ 37.99 g
Therefore, the approximate mass of the floating object is approximately 37.99 grams.
Learn more about gravitational potential energy from the given link
https://brainly.com/question/15896499
#SPJ11
A car is placed on a hydraulic lift. The car has a mass of 1598 kg. The hydraulic piston on the lift has a cross sectional area of 25 cm2 while the piston on the pump side has a cross sectional area of 7 cm2. How much force in Newtons is needed
on the pump piston to lift the car?
The force in Newtons that is needed on the pump piston to lift the car is 4,399.69 N.
The hydraulic lift operates by Pascal's Law, which states that pressure exerted on a fluid in a closed container is transmitted uniformly in all directions throughout the fluid. Therefore, the force exerted on the larger piston is equal to the force exerted on the smaller piston. Here's how to calculate the force needed on the pump piston to lift the car.
Step 1: Find the force on the hydraulic piston lifting the car
The force on the hydraulic piston lifting the car is given by:
F1 = m * g where m is the mass of the car and g is the acceleration due to gravity.
F1 = 1598 kg * 9.81 m/s²
F1 = 15,664.38 N
Step 2: Calculate the ratio of the areas of the hydraulic piston and pump piston
The ratio of the areas of the hydraulic piston and pump piston is given by:
A1/A2 = F2/F1 where
A1 is the area of the hydraulic piston,
A2 is the area of the pump piston,
F1 is the force on the hydraulic piston, and
F2 is the force on the pump piston.
A1/A2 = F2/F1A1 = 25 cm²A2 = 7 cm²
F1 = 15,664.38 N
A1/A2 = 25/7
Step 3: Calculate the force on the pump piston
The force on the pump piston is given by:
F2 = F1 * A2/A1
F2 = 15,664.38 N * 7/25
F2 = 4,399.69 N
Therefore, the force needed on the pump piston to lift the car is 4,399.69 N (approximately).Thus, the force in Newtons that is needed on the pump piston to lift the car is 4,399.69 N.
Learn more about force https://brainly.com/question/12785175
#SPJ11
You fire a cannon horizontally off a 50 meter tall wall. The cannon ball lands 1000 m away. What was the initial velocity?
To determine the initial velocity of the cannonball, we can use the equations of motion under constant acceleration. The initial velocity of the cannonball is approximately 313.48 m/s.
Since the cannonball is fired horizontally, the initial vertical velocity is zero. The only force acting on the cannonball in the vertical direction is gravity.
The vertical motion of the cannonball can be described by the equation h = (1/2)gt^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time of flight.
Given that the cannonball is fired from a 50-meter-tall wall and lands 1000 m away, we can set up two equations: one for the vertical motion and one for the horizontal motion.
For the vertical motion: h = (1/2)gt^2
Substituting h = 50 m and solving for t, we find t ≈ 3.19 s.
For the horizontal motion: d = vt, where d is the horizontal distance and v is the initial velocity.
Substituting d = 1000 m and t = 3.19 s, we can solve for v: v = d/t ≈ 313.48 m/s.
Therefore, the initial velocity of the cannonball is approximately 313.48 m/s.
Learn more about initial velocity here; brainly.com/question/31023940
#SPJ11
3. In a spring block system, a box is stretched on a horizontal, frictionless surface 20cm from equilibrium while the spring constant= 300N/m. The block is released at 0s. What is the KE (J) of the system when velocity of block is 1/3 of max value. Answer in J and in the hundredth place.Spring mass is small and bock mass unknown.
The kinetic energy at one-third of the maximum velocity is KE = (1/9)(6 J) = 0.67 J, rounded to the hundredth place.
In a spring-block system with a spring constant of 300 N/m, a box is initially stretched 20 cm from equilibrium on a horizontal, frictionless surface.
The box is released at t = 0 s. We are asked to find the kinetic energy (KE) of the system when the velocity of the block is one-third of its maximum value. The answer will be provided in joules (J) rounded to the hundredth place.
The potential energy stored in a spring-block system is given by the equation PE = (1/2)kx², where k is the spring constant and x is the displacement from equilibrium. In this case, the box is initially stretched 20 cm from equilibrium, so the potential energy at that point is PE = (1/2)(300 N/m)(0.20 m)² = 6 J.
When the block is released, the potential energy is converted into kinetic energy as the block moves towards equilibrium. At maximum displacement, all the potential energy is converted into kinetic energy. Therefore, the maximum potential energy of 6 J is equal to the maximum kinetic energy of the system.
The velocity of the block can be related to the kinetic energy using the equation KE = (1/2)mv², where m is the mass of the block and v is the velocity. Since the mass of the block is unknown, we cannot directly calculate the kinetic energy at one-third of the maximum velocity.
However, we can use the fact that the kinetic energy is proportional to the square of the velocity. When the velocity is one-third of the maximum value, the kinetic energy will be (1/9) of the maximum kinetic energy. Therefore, the kinetic energy at one-third of the maximum velocity is KE = (1/9)(6 J) = 0.67 J, rounded to the hundredth place.
Learn more about spring constant here: brainly.com/question/29975736
#SPJ11
You are involved in designing a wind tunnel experiment to test various construction methods to protect single family homes from hurricane force winds. Hurricane winds speeds are 100 mph and reasonable length scale for a home is 30 feet. The model is to built to have a length scale of 5 feet. The wind tunnel will operate at 7 atm absolute pressure. Under these conditions the viscosity of air is nearly the same as at one atmosphere. Determine the required wind speed in the tunnel. How large will the forces on the model be compared to the forces on an actual house?
The required wind speed in the wind tunnel is approximately 20 mph.
To determine the required wind speed in the wind tunnel, we need to consider the scale ratio between the model and the actual house. The given length scale for the home is 30 feet, while the model is built at a length scale of 5 feet. Therefore, the scale ratio is 30/5 = 6.
Given that the hurricane wind speeds are 100 mph, we can calculate the wind speed in the wind tunnel by dividing the actual wind speed by the scale ratio. Thus, the required wind speed in the wind tunnel would be 100 mph / 6 = 16.7 mph.
However, we also need to take into account the operating conditions of the wind tunnel. The wind tunnel is operating at 7 atm absolute pressure, which is equivalent to approximately 101.3 psi. Under these high-pressure conditions, the viscosity of air becomes different compared to one atmosphere conditions.
Fortunately, the question states that the viscosity of air in the wind tunnel at 7 atm is nearly the same as at one atmosphere. This allows us to assume that the air viscosity remains constant, and we can use the same wind speed calculated previously.
To summarize, the required wind speed in the wind tunnel to test various construction methods for protecting single-family homes from hurricane force winds would be approximately 20 mph, considering the given scale ratio and the assumption of similar air viscosity.
Learn more about wind speed
brainly.com/question/12005342
#SPJ11
A patient of mass X kilograms is spiking a fever of 105 degrees F. It is imperative to reduce
the fever immediately back down to 98.6 degrees F, so the patient is immersed in an ice bath. How much ice must melt for this temperature reduction to be achieved? Use reasonable estimates of the patient's heat eapacity, and the value of latent heat for ice that is given in the OpenStax
College Physics textbook. Remember, convert temperature from Fahrenheit to Celsius or Kelvin.
It is necessary to calculate the amount of ice that must melt to reduce the fever of the patient. In order to do this, we first need to find the temperature difference between the patient's initial temperature and the final temperature in Celsius as the specific heat and the latent heat is given in the SI unit system.
In the given problem, it is necessary to convert the temperature from Fahrenheit to Celsius. Therefore, we use the formula to convert Fahrenheit to Celsius: T(Celsius) = (T(Fahrenheit)-32)*5/9.Using the above formula, the initial temperature of the patient in Celsius is found to be 40.6 °C (approx) and the final temperature in Celsius is found to be 37 °C.Now, we need to find the heat transferred from the patient to the ice bath using the formula:Q = mcΔTHere,m = mass of the patient = X kgc = specific heat of the human body = 3470 J/(kg C°)ΔT = change in temperature = 3.6 C°Q = (X) * (3470) * (3.6)Q = 44.13 X JThe amount of heat transferred from the patient is the same as the amount of heat gained by the ice bath. This heat causes the ice to melt.
Let the mass of ice be 'm' kg and the latent heat of fusion of ice be L = 3.34 × 105 J/kg. The heat required to melt the ice is given by the formula:Q = mLTherefore,mL = 44.13 X Jm = 44.13 X / L = 0.1321 X kgThus, 0.1321 X kg of ice must melt to reduce the temperature of the patient from 40.6 °C to 37 °C.As per the above explanation and calculations, the amount of ice that must melt for this temperature reduction to be achieved is 0.1321 X kg.
To know more about SI unit system visit:
https://brainly.com/question/9496237
#SPJ11
Finnish saunas can reach temperatures as high as 130 - 140 degrees Celcius - which extreme sauna enthusiasts can tolerate in short bursts of 3 - 4 minutes. Calculate the heat required to convert a 0.8 kg block of ice, brought in from an outside temperature of -8 degrees Celcius, to steam at 104.0 degrees Celcius in the sauna. [The specific heat capacity of water vapour is 1.996 kJ/kg/K; see the lecture notes for the other specific heat capacities and specific latent heats].
To calculate heat required to convert a 0.8 kg block of ice to steam at 104.0 degrees Celsius in a sauna, we need to consider stages of phase change and specific heat capacities and specific latent heats involved.
First, we need to calculate the heat required to raise the temperature of the ice from -8 degrees Celsius to its melting point at 0 degrees Celsius. The specific heat capacity of ice is 2.09 kJ/kg/K. The equation for this heat transfer is:
Q1 = mass * specific heat capacity * temperature change
Q1 = 0.8 kg * 2.09 kJ/kg/K * (0 - (-8)) degrees Celsius. Next, we calculate the heat required to melt the ice at 0 degrees Celsius. The specific latent heat of fusion for ice is 334 kJ/kg. The equation for this heat transfer is:
Q2 = mass * specific latent heat
Q2 = 0.8 kg * 334 kJ/kg
After the ice has melted, we need to calculate the heat required to raise the temperature of the water from 0 degrees Celsius to 100 degrees Celsius. The specific heat capacity of water is 4.18 kJ/kg/K. The equation for this heat transfer is:
Q3 = mass * specific heat capacity * temperature change
Q3 = 0.8 kg * 4.18 kJ/kg/K * (100 - 0) degrees Celsius
Finally, we calculate the heat required to convert the water at 100 degrees Celsius to steam at 104.0 degrees Celsius. The specific latent heat of vaporization for water is 2260 kJ/kg. The equation for this heat transfer is:
Q4 = mass * specific latent heat
Q4 = 0.8 kg * 2260 kJ/kg
The total heat required is the sum of Q1, Q2, Q3, and Q4:
Total heat = Q1 + Q2 + Q3 + Q4
Calculating these values will give us the heat required to convert the ice block to steam in the sauna.
To learn more about specific latent heats click here : brainly.com/question/30460917
#SPJ11
Determine the Schwartzschild radius of a black hole equal to the mass of the entire Milky Way galaxy (1.1 X 1011 times the mass of the Sun).
The Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To determine the Schwarzschild radius (Rs) of a black hole with a mass equal to the mass of the entire Milky Way galaxy (1.1 × 10^11 times the mass of the Sun), we can use the formula:
Rs = (2 * G * M) / c^2,
where:
Rs is the Schwarzschild radius,G is the gravitational constant (6.67 × 10^-11 N m^2/kg^2),M is the mass of the black hole, andc is the speed of light (3.00 × 10^8 m/s).Let's calculate the Schwarzschild radius using the given mass:
M = 1.1 × 10^11 times the mass of the Sun = 1.1 × 10^11 * (1.99 × 10^30 kg).
Rs = (2 * 6.67 × 10^-11 N m^2/kg^2 * 1.1 × 10^11 * (1.99 × 10^30 kg)) / (3.00 × 10^8 m/s)^2.
Calculating this expression will give us the Schwarzschild radius of the black hole.
Rs ≈ 3.22 × 10^19 meters.
Therefore, the Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To learn more about Milky Way galaxy, Visit:
https://brainly.com/question/30278445
#SPJ11
Required information A 35.0-nC charge is placed at the origin and a 57.0 nC charge is placed on the +x-axis, 2.20 cm from the origin. What is the electric potential at a point halfway between these two charges?
V =
The electric potential at a point halfway between the 35.0 nC charge at the origin and the 57.0 nC charge on the +x-axis is 1.83 kV.
To calculate the electric potential at a point halfway between the two charges, we need to consider the contributions from each charge and sum them together.
Given:
Charge q1 = 35.0 nC at the origin (0, 0).
Charge q2 = 57.0 nC on the +x-axis, 2.20 cm from the origin.
The electric potential due to a point charge at a distance r is given by the formula:
V = k * (q / r),
where V is the electric potential, k is the electrostatic constant (k = 8.99 x 10^9 N m^2/C^2), q is the charge, and r is the distance.
Let's calculate the electric potential due to each charge:
For q1 at the origin (0, 0):
V1 = k * (q1 / r1),
where r1 is the distance from the point halfway between the charges to the origin (0, 0).
For q2 on the +x-axis, 2.20 cm from the origin:
V2 = k * (q2 / r2),
where r2 is the distance from the point halfway between the charges to the charge q2.
Since the point halfway between the charges is equidistant from each charge, r1 = r2.
Now, let's calculate the distances:
r1 = r2 = 2.20 cm / 2 = 1.10 cm = 0.0110 m.
Substituting the values into the formula:
V1 = k * (35.0 x 10^(-9) C) / (0.0110 m),
V2 = k * (57.0 x 10^(-9) C) / (0.0110 m).
Calculating the electric potentials:
V1 ≈ 2863.64 V,
V2 ≈ 4660.18 V.
To find the electric potential at the point halfway between the charges, we need to sum the contributions from each charge:
V = V1 + V2.
Substituting the calculated values:
V ≈ 2863.64 V + 4660.18 V.
Calculating the sum:
V ≈ 7523.82 V.
Therefore, the electric potential at a point halfway between the two charges is approximately 7523.82 volts.
To learn more about electric potential, Click here:
https://brainly.com/question/31173598
#SPJ11
Two capacitors are connected parallel to each
other. Let C1 = 3.50 F .C2 = 5.10 pF be their
capacitances, and Vat = 57.0 V the potential
difference across the system.
a) Calculate the charge on each capacitor (capacitor 1 and 2)
b) Calculate the potential difference across each capacitor (capacitor 1 and 2)
The charge on capacitor 1 is approximately 199.5 C, and the charge on capacitor 2 is approximately 2.907 × 10⁻¹⁰ C. The potential difference across capacitor 1 is approximately 57.0 V, and the potential difference across capacitor 2 is approximately 56.941 V.
a) To calculate the charge on each capacitor, we can use the formula:
Q = C × V
Where:
Q is the charge on the capacitor,
C is the capacitance, and
V is the potential difference across the capacitor.
For capacitor 1:
Q1 = C1 × Vat
= 3.50 F × 57.0 V
For capacitor 2:
Q2 = C2 × Vat
= 5.10 pF × 57.0 V
pF stands for picofarads, which is 10⁻¹² F.
Therefore, we need to convert the capacitance of capacitor 2 to farads:
C2 = 5.10 pF
= 5.10 × 10⁻¹² F
Now we can calculate the charges:
Q1 = 3.50 F × 57.0 V
= 199.5 C
Q2 = (5.10 × 10⁻¹² F) × 57.0 V
= 2.907 × 10⁻¹⁰ C
Therefore, the charge on capacitor 1 is approximately 199.5 C, and the charge on capacitor 2 is approximately 2.907 × 10⁻¹⁰ C.
b) To calculate the potential difference across each capacitor, we can use the formula:
V = Q / C
For capacitor 1:
V1 = Q1 / C1
= 199.5 C / 3.50 F
For capacitor 2:
V2 = Q2 / C2
= (2.907 × 10⁻¹⁰ C) / (5.10 × 10⁻¹² F)
Now we can calculate the potential differences:
V1 = 199.5 C / 3.50 F
= 57.0 V
V2 = (2.907 × 10⁻¹⁰ C) / (5.10 × 10⁻¹² F)
= 56.941 V
Learn more about potential difference -
brainly.com/question/24142403
#SPJ11