et D Q.No. 9 Convert 1-bromopropane to 2-bromopropane.[2]​

Based on the information, the solubility product of AgCl is 6.91 × 10^-10.

The common ion effect concerns the decrease in solubility of a salt when it comes into contact with another compound containing an identical ion within its make-up. This phenomenon is caused by the dependetics that arise from this shared element, which results in a decreasing amount of ions required for dissolving said salt. An illustrative instance is seen when observing the effects of calcium chloride (CaCl2) on calcium sulfate (CsSO4).

Named reactions constitute a subclass of chemical interchanges widely used within organic chemistry. These yield profound utilization due to their notorious titles attributed to notable scientists or related to other respective exploits; they are thus named following mannerisms peculiar to the substance itself.

Learn more about ion on

https://brainly.com/question/13692734

#SPJ1

The percentage composition of the water of hydration for each compound is shown below.

The percentage of water of hydration, also known as percent water of crystallization, is a measure of the amount of water that is chemically bound to a salt or other compound as part of its crystal structure.

1) For CaSO4 * 2 H₂O

36/172 * 100/1

= 21%

For CoCl2 * 6 H₂O

108/238 * 100/1

= 45%

For CuSO4* 5 H2O

90/250 * 100/1

= 36%

For MgSO4 * 7 H₂O

126/246 * 100/1

= 51%

Learn more about hydration :https://brainly.com/question/14229407

#SPJ1

a) The chemical formula for iron (III) nitrate is Fe(NO₃)₃. b) The chemical formula for lead (II) sulfate is PbSO₄. c) The chemical formula for silver nitrate is AgNO₃.

In chemical nomenclature, the Roman numeral in the name of the compound indicates the oxidation state of the metal ion. To determine the chemical formula of a compound, it is important to balance the charge of the ions in the compound. In the case of iron (III) nitrate, the iron ion has a +3 charge and the nitrate ion has a -1 charge, so it takes three nitrate ions to balance the charge of the iron ion.

In the case of lead (II) sulfate, the lead ion has a +2 charge and the sulfate ion has a -2 charge, so it takes one lead ion and one sulfate ion to balance the charges. Similarly, in the case of silver nitrate, the silver ion has a +1 charge and the nitrate ion has a -1 charge, so it takes one of each to balance the charges.

To learn more about chemical formulas, here

https://brainly.com/question/11995171

#SPJ1

It is in the exothermic reaction, system loses heat to surroundings. Since heat is given out in exothermic reactions, enthalpy of products will be less than that of the reactants. Products have less potential energy than reactants for exothermic reactions.

The chemical reactions which proceed with the evolution of heat energy are called the exothermic reactions. The energy hump corresponds to the energy barrier existing between the reactants and products in an exothermic reaction.

From the energy diagram of an exothermic reaction, products have less potential energy than the reactants.

To know more about exothermic reaction, visit;

https://brainly.com/question/28546817

#SPJ1

The reaction between A and B is reactant favored. This  inference can be drawn from the graph.

Chemical reactions occur all around us, including in our body's digestion of food and the creation of the sunlight's light. Understanding both chemical and physical alterations is crucial before starting any chemical reactions. The best illustration of a chemical and physical alteration is a burning candle. The reaction between A and B is reactant favored. This  inference can be drawn from the graph.

Therefore, the correct option is option A.

To know more about Chemical reaction, here:

https://brainly.com/question/29039149

#SPJ1

The balanced reactions are;

NH3 (aq) + HBr (aq) → NH4Br (aq)

PO4^3-(aq) + H3O^+(aq) ----> HPO4^2- (aq)+ H2O(l)

HS^-(aq) + OH^-(aq) ----> H2O(l) + S^2-(aq)

A conjugate acid/base pair consists of two species that are distinct from one another by one proton. The base is the species that can accept a proton, and the acid is the species that can donate a proton. When a base takes a proton, it changes into an acid, and when an acid gives a proton, it changes into a base.

In reaction (1) above, the conjugate acid of NH3 is NH4^+ while the conjugate base of HBr is Br^-.

Learn more about conjugate acid:https://brainly.com/question/31229565

#SPJ1

1) Indium and aluminum belong to the same group.

2) Barium belongs to groups 2 and 6

The compounds' names are;

Tetrachloro phosphorus chloride

Calcium bromide

Hexasulfur nitrogen

The following molecules balance the charges:

K3P, CaS, Al2O3

Chlorine and fluorine are elements of group 17

Magnesium and salt are the components that make up period 3.

The data are used to create the balanced equations;

Sn + 2H2O = SnO2 + H2

3O2 + 4Al = 2Al2O3

2Au + 3H2S = Au2S3 + 3H2

Learn more about periodic table:brainly.com/question/29769486

#SPJ1

Answer:

the potential across this cell membrane is -0.082 volts, with the inside of the cell being negative relative to the outside.

Explanation:

The Nernst equation can be used to calculate the equilibrium potential (in volts) for a given ion across a membrane, given the concentration of the ion inside and outside the cell:

E = (RT/zF) ln([ion]out/[ion]in)

where E is the equilibrium potential, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (37+273=310 K), z is the charge on the ion (+1 for K+), F is the Faraday constant (96,485 C/mol), [ion]out is the extracellular concentration of the ion (4.0 mM for K+), and [ion]in is the intracellular concentration of the ion (150 mM for K+).

Plugging in these values:

E = (8.314310/196485) ln(4.0/150)

E = -0.082 V

Therefore, the potential across this cell membrane is -0.082 volts, with the inside of the cell being negative relative to the outside.

The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier.

The scientific study of inheritance and genes is covered in this page, along with details on the structure of DNA, chromosomes, gene variants, and the evolution of living beings and their genomes.

(1) The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier. (2) The probability that these parents will have an offspring affected with sickle cell anemia is 50 percent.  (3) The probability that their offspring would also be a carrier like them is 50 percent.

To know more about genetic, here:

https://brainly.com/question/30459739

#SPJ1

4.0 moles of Al₂O₃ will be form from 6.0 moles of O₂.

(2 moles Al₂O₃) / (3 moles O₂)

= (x moles Al₂O₃) / (6.0 moles O₂)

To solve for x, we can cross-multiply:

(2 moles Al₂O₃) * (6.0 moles of  O₂)

= (3 moles of O₂) * (x moles of Al₂O₃)

12.0 moles Al₂O₃ = 3x moles Al₂O₃

Now, divide both sides by 3:

x = 4.0 moles Al₂O₃

So, 4.0 moles of Al₂O₃ form from 6.0 moles of O₂.

Read more on chemical reactions here:https://brainly.com/question/11231920

#SPJ1

Answer:

Explanation:

The number of atoms that remains after 3 half-lives given that it was originally 300000 atoms is 37500 atoms

Data obtained from the question

Original amount (N₀) = 300000 atoms

Number of half-lives (n) = 3

Amount remaining (N) =?

How to determine the amount remaining

The amount remaining after 3 half-lives can be obtained as illustrated below:

N = N₀ / 2ⁿ

N = 300000 / 2³

N = 300000 / 8

N = 37500 atoms

Answer:

The charge that is typical for ions of the alkaline earth metals is +2

Explanation:

Group 1 elements (alkali metals such as Li, Na, K...) all have one valence electron that they donate when forming ionic bonds. This will cause them to have a charge of +1.T he alkaline earth metals (Ca, Mg) have two valence electrons they donate which means their charge when forming ions is +2. The members of the aluminum family lose three electrons giving them a charge of +3.

The mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg

The balanced equation for reaction between [tex]NO_2[/tex], oxygen, and water to form nitric acid :

[tex]4NO_2[/tex](g) + O2(g) + [tex]2H_2O[/tex](l) → [tex]HNO_3[/tex](aq)

Molar mass of [tex]NO_2[/tex] is 46.01 g/mol, so :

16 kg / 46.01 g/mol = 347.77 mol of [tex]NO_2[/tex]

We see that for every 4 moles of [tex]NO_2[/tex], 4 moles of [tex]HNO_3[/tex] are produced.

Therefore, number of moles of [tex]HNO_3[/tex] produced from 347.77 mol  [tex]NO_2[/tex] is:

moles of [tex]HNO_3[/tex] =[tex]4/4 * 347.77\ mol = 347.77\ mol[/tex]

The mass of [tex]HNO_3[/tex] produced is:

mass of [tex]HNO_3[/tex] = 347.77 mol x 63.01 g/mol = 21.92 kg

Rounding to two significant figures and including the appropriate units, the mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg.

To know more about balanced equation, here

brainly.com/question/7181548

#SPJ1

To measure the reaction heat more accurately at isobaric condition, we can add a lid to the calorimeter to prevent heat loss due to evaporation.

Thus, to measure the reaction heat more accurately at isobaric condition, some certain modifications can be made to the coffee cup calorimeter which includes adding a lid to the calorimeter to prevent heat loss due to evaporation to keep the pressure inside the calorimeter constant.

Using a magnetic stir bar to ensure even mixing of the reactants to ensure the accurate temperature readings, use of thermometer with a smaller stem to reduce the amount of heat transferred from the solution to the thermometer, etc. are some other modifications that can be made on the coffee cup calorimeter to measure the reaction heat more accurately at isobaric condition.

Learn more about the isobaric condition here:

https://brainly.com/question/13089696

#SPJ1

In (a) the octet rule is  not satisfied

In (b) Si does not satisfy the octet rule

In (d) N does not satisfy the octet rule

Every valence electron is represented as a dot, while pairs of shared electrons between atoms in a covalent connection are represented by lines.

The Lewis structure helps to predict the geometry and properties of a molecule, as well as the nature of the chemical bonds between atoms.

The issues with each of the Lewis structures have been shown above.

Learn more about Lewis structure:https://brainly.com/question/2030045

#SPJ1

Acetic acid only partially ionizes in water as it is a weak acid.

Weak Acids are the acids that do not completely dissociate into their constituent ions when dissolved in solutions.

When dissolved in water, an equilibrium is established between the concentration of the weak acid and its constituent ions.

Acetic acid, also known as ethanoic acid, is a weak acid with the chemical formula CH₃COOH. It is known to be the active component of vinegar.

Learn more about Weak acids, here:

https://brainly.com/question/22104949

#SPJ1

The value of K, for the decomposition of ammonia at 127 °C is 2.27x10⁻⁵

The Equilibrium Constant is denoted by K and it is a quantitative measure of the extent to which a chemical reaction reaches equilibrium.

It is defined as the ratio of the concentrations (or partial pressures) of the products to the concentrations (or partial pressures) of the reactants, with each concentration or partial pressure raised to a power equal to its stoichiometric coefficient in the balanced chemical equation.

For a general chemical equation:

aA + bB ⇌ cC + dD

The equilibrium constant expression is written as:

K =  [tex]\frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

where [A], [B], [C], and [D] represent the molar concentrations (or partial pressures) of the reactants and products at equilibrium, and a, b, c, and d represent their stoichiometric coefficients in the balanced chemical equation.

Back to our main question, the equilibrium constant for the reverse reaction (decomposition of ammonia) can be obtained from the equilibrium constant of the forward reaction (synthesis of ammonia) using the relationship:

Kreverse = 1 / Kforward

where Kforward is the equilibrium constant for the synthesis of ammonia.

Substituting the given value of Kforward:

Kreverse = 1 / 44005 = 0.0000227

In standard form, we have 2.27x10⁻⁵

Learn more about equilibrium constant here:

https://brainly.com/question/3159758

#SPJ1

3.20 g is the measurement of mass.

Mass is a measure of the amount of matter in an object, and is typically expressed in grams (g), kilograms (kg) or pounds (lb). Mass is an intrinsic property of an object, meaning it is independent of its environment.

Mass is measured using a balance or scale, which compares the mass of an object to a known standard. In the case of 3.20 g, this would be the mass of an object compared to the mass of a reference object, such as a kilogram.

Learn more about mass at:

https://brainly.com/question/19694949

#SPJ1

a) Based on the IR spectrum, the functional groups responsible for the labeled absorptions are:

i) 1601 cm⁻¹: This absorption indicates the presence of an unsaturated carbonyl group, such as a conjugated or isolated enone.

ii) 1691 cm⁻¹: This absorption indicates the presence of a saturated carbonyl group, such as a ketone or aldehyde.

iii) The base peak at m/z = 105 suggests the loss of a fragment with a mass of 28 (105 - 77). This mass corresponds to the loss of a carbon monoxide (CO) group.

iv) The likely structure of the fragment lost to form m/z 105 is a carbonyl group (C=O).

v) The peak at m/z = 77 suggests the loss of a fragment with a mass of 28 (105 - 77). This mass corresponds to the loss of a methyl group (CH₃). Therefore, the parent compound might contain a methyl group that is lost to form the peak at m/z = 77.

Learn more about methyl group at:

https://brainly.com/question/12904781

#SPJ1

Based on the particle diagram provided and the given statements, the correct statement about the reaction is; Mg is oxidized because it loses two electrons as it forms Mg²⁺. Option A is correct.

In the particle diagram, Magnesium (represented as Mg) loses two electrons, indicated by the arrows pointing away from the Mg particle. This means that Mg undergoes oxidation, as it loses electrons and its oxidation state increases from 0 to +2 when it forms Mg²⁺. Oxidation is defined as the loss of electrons or an increase in oxidation state.

On the other hand, Br₂ (represented as Br Br) gains two electrons, indicated by the arrows pointing towards the Br Br particles. This means that Br₂ undergoes reduction, as it gains electrons and its oxidation state decreases from 0 to -1 when it forms Br⁻. Reduction is defined as the gain of electrons or a decrease in oxidation state.

Hence, A. is the correct option.

To know more about  particle diagram here

https://brainly.com/question/28027727

#SPJ1

--The given question is incomplete, the complete question is

"'Mg Br Mg? Br Br Br The formation of magnesium bromide from Mg ad Brz is represented in the particle diagram. Which of the following statements about the reaction is correct? A) Mg is oxidized because it loses two electrons as it forms Mg²⁺? B) Mg is reduced because it gains two electrons as it forms Mg? C) Br is oxidized because it gains an electron as it forms Br Br is reduced because it loses proton as it forms Br J3DE'."--

Answer: Mg is oxidized because it loses two electrons as it forms Mg²⁺

Explanation:

Answer:

Simple molecules, also known as covalent molecules, are made up of two or more non-metal atoms that share electrons to form a covalent bond. The shape of a simple molecule is determined by the arrangement of its atoms in space, which is influenced by the number of electron pairs surrounding the central atom and the repulsion between them.

In general, there are two types of electron pairs: bonding pairs and non-bonding pairs (also known as lone pairs). Bonding pairs are shared between two atoms and create a strong bond that holds the molecule together. Non-bonding pairs are not shared and exert a repulsive force on the other electron pairs in the molecule.

The repulsion between electron pairs determines the shape of the molecule. For example, if a molecule has two electron pairs (a bonding pair and a non-bonding pair), they will arrange themselves as far apart as possible, which results in a linear shape. If a molecule has three electron pairs (two bonding pairs and one non-bonding pair), they will arrange themselves in a trigonal planar shape. If a molecule has four electron pairs (three bonding pairs and one non-bonding pair), they will arrange themselves in a tetrahedral shape.

Overall, the shape of a simple molecule is determined by the number of electron pairs and the repulsion between them.