The perimeter of the updated blueprint will be 24 times the sum of the original length and width.
If Ezra wants to multiply the dimensions of the stage by a certain percentage to make the image 12 times larger than the original, he needs to find out what percentage that is.
To do this, he can divide the desired size of the new stage by the original size of the stage, and then multiply by 100 to get the percentage increase. So, if the original blueprint dimensions are x by y, and he wants to make the image 12 times larger, the new dimensions will be 12x by 12y.
To find the percentage increase, he can use the following formula:
Percentage increase = [(new size - original size) / original size] x 100
In this case, the new size is 12 times the original size, so the formula becomes:
Percentage increase = [(12x * 12y - x * y) / (x * y)] x 100
Simplifying this expression gives:
Percentage increase = [(144xy - x * y) / (x * y)] x 100 = 14300%
Therefore, Ezra needs to multiply the dimensions of the stage by 14300% to make the image 12 times larger than the original blueprint.
To find the perimeter of the updated blueprint, he can use the formula for the perimeter of a rectangle, which is: Perimeter = 2(length + width)
In this case, the length and width have been multiplied by 12, so the new perimeter becomes:
Perimeter = 2(12x + 12y) = 24(x + y)
Therefore, the perimeter of the updated blueprint will be 24 times the sum of the original length and width.
To learn more about perimeter here:
brainly.com/question/6465134#
#SPJ11
Determine the equation of the circle graphed below.
Answer:
Step-by-step explanation:
Circle centre: (4,7)
Radius: 3
Equation is:
[tex](x-h)^2+(y-k)^2=r^2[/tex] (where (h,k) is center, r is radius)
[tex](x-4)^2+(y-7)^2=3^2[/tex]
[tex](x-4)^2+(y-7)^2=9[/tex] (This is the general standard form )
in expanded form,
[tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]
[tex]x^2+y^2-8x-14y+56=0[/tex]
Note: Unless stated either form is an acceptable answer.
If the width and length of a rectangle is 3 by 8 what is the width and length actually if the width is 10. 5
The new length of the rectangle is approximately 2.29 units. We use the formula for the area of a rectangle to solve for the new length, given the new width.
If the width and length of a rectangle are 3 and 8, respectively, and the width is increased to 10.5, we can calculate the new length of the rectangle using the formula for the area of a rectangle, which is length multiplied by width.
The original area of the rectangle is 3 x 8 = 24 square units. If we increase the width to 10.5, the new area of the rectangle becomes: 10.5 x length = 24 Solving for the length, we get: length = 24/10.5 = 2.29 (rounded to two decimal places)
It's important to note that changing one dimension of a rectangle can affect the other dimension, especially if we want to maintain the same area.
Learn more about rectangle here:
https://brainly.com/question/27722891
#SPJ4
Jaxon invested $710 in an account paying an interest rate of 8\tfrac{7}{8}8 8 7 % compounded quarterly. Jason invested $710 in an account paying an interest rate of 8\tfrac{5}{8}8 8 5 % compounded continuously. After 8 years, how much more money would Jaxon have in his account than Jason, to the nearest dollar?
Answer:
I attached your answer along with an explanation
Step-by-step explanation:
Please Like me follow me and Give me Crown for more help. :)
In ΔPQR, r = 7.8 cm, q = 6 cm and ∠Q=30°. Find all possible values of ∠R, to the nearest 10th of a degree.
The twο pοssible values οf ∠R tο the nearest 10th οf a degree are 33.6° and 326.4°.
What is a triangle?A triangle is a clοsed twο-dimensiοnal geοmetric shape with three straight sides and three angles. It is the simplest pοlygοn, which is a flat shape cοnsisting οf straight lines.
We can use the Law οf Cοsines tο find the length οf side QR:
[tex]c^2 = a^2 + b^2 - 2ab[/tex] cοs(C)
where c is the length οf side QR, a is the length οf side PQ (which is unknοwn), b is the length οf side PR (which is 7.8 cm), and C is the angle οppοsite side c (which is 30°). Substituting the given values, we get:
[tex]QR^2 = PQ^2 + 7.8^2 - 2(PQ)(7.8)cos(30^\circ )[/tex]
[tex]QR^2 = PQ^2 + 60.84 - 7.8PQ[/tex]
Next, we can use the Law οf Sines tο relate the length οf side PQ tο the angle οppοsite it, ∠P:
PQ/sin(30°) = QR/sin(P)
PQ = QR(sin(30°)/sin(P))
Substituting this expressiοn fοr PQ intο the equatiοn fοr [tex]QR^2[/tex] abοve, we get:
[tex]QR^2 = [QR(sin(30^\circ)/sin(P))]^2 + 60.84 - 7.8[QR(sin(30^\circ)/sin(P))][/tex]
Simplifying and rearranging, we get a quadratic equatiοn in terms οf QR:
[tex]QR^2 - 3.9QR + 28.99 = 0[/tex]
Using the quadratic fοrmula, we find that:
QR ≈ 7.466 cm οr QR ≈ 3.866 cm
Since we knοw that QR < PQ + PR = 6 + 7.8 = 13.8, the οnly valid sοlutiοn is QR ≈ 7.466 cm. Therefοre, we have:
[tex]cos(R) = (PQ^2 + QR^2 - PR^2)/(2PQQR)[/tex]
[tex]cos(R) = (PQ^2 + 7.466^2 - 7.8^2)/(2PQ(7.466))[/tex]
[tex]cos(R) = (PQ^2 - 4.928)/[2PQ(7.466)][/tex]
Since cοs(R) ≤ 1, we have:
[tex]PQ^2 - 4.928 ≤ 2PQ(7.466)[/tex]
Sοlving fοr PQ using the quadratic fοrmula, we get:
PQ ≤ 5.474 cm οr PQ ≥ 20.032 cm
Since PQ < PR, the οnly valid sοlutiοn is:
PQ ≈ 5.474 cm
Nοw we can use the Law οf Cοsines again tο find ∠R:
[tex]cos(R) = (PQ^2 + PR^2 - QR^2)/(2PQPR)[/tex]
[tex]cos(R) = (5.474^2 + 7.8^2 - 7.466^2)/(2(5.474)(7.8))[/tex]
cοs(R) ≈ 0.828
R ≈ 33.6° οr R ≈ 326.4°
Therefοre, the twο pοssible values οf ∠R tο the nearest 10th οf a degree are 33.6° and 326.4°.
To learn more about triangle from the given link:
https://brainly.com/question/2773823
#SPJ1
A particle of mass 1. 2 kg is moving with speed of 8 ms inn a straight line on a horizontal table. A resistance force is app. Lied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, ao that F=0,3v^2
The speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2[/tex], or 19.2 N.
A particle of mass 1.2 kg is moving with a speed of 8 m/s in a straight line on a horizontal table. A resistance force is applied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, such that [tex]F=0.3v^2[/tex]
The force of resistance is an opposing force that acts to reduce the speed of the particle. As the particle moves faster, the resistance force increases. The force is proportional to the square of the speed, meaning that if the speed doubles, the force is multiplied by four. The force is also in the same direction as the motion, meaning that it will reduce the speed of the particle.
The equation for the force of resistance is [tex]F=0.3v^2[/tex], where v is the speed of the particle. Therefore, if the speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2,[/tex] or 19.2 N. This means that the force of resistance acting on the particle is 19.2 N.
for such more question on resistance
https://brainly.com/question/28135236
#SPJ11
7(x+4)= -21 i need help pls help me its hard 8th grade btw
The given equation is 7(x+4) = -21 . Therefore, the value of x is 7
In mathematics, an equation is a formula that connects two expressions with the equal sign = to indicate that they are equal. An equation is made up of two expressions joined by an equal sign ("="). Expressions for both sides of the equals sign are called the "left side" and the "right side" of the equation. Many times the right side of the equation is assumed to be zero. Assuming this does not reduce generality, this can be achieved by subtracting the right side from both sides.
According to the Question:
The given equation is:
7(x+4)= -21
⇒ 7x + 28 = -21
⇒ 7x = -49
⇒ x = 7
Complete Question:
Solve the Equation : 7(x+4)= -21
Learn more about Equation:
https://brainly.com/question/29273511
#SPJ4
Quadrilateral ABCD is inscribed in this circle.
What is the measure of angle B?
suppose vi pays its phone reps $12 per hour. how many phone reps should it employ if it wants to maximize profit?
Therefore , the solution of the given problem of unitary method comes out to be hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.
An unitary method is what?This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.
Here,
The formula below can be used to determine the ideal amount of phone representatives:
=> MR = MC
Where n is the amount of phone reps and 12 is their hourly wage, the cost is given by C = 12n.
The following results are obtained by taking the derivative of revenue and cost with regard to n:
=> MR=dR/dn = k
=> dC/dn = 12 for MC.
When we set MR equal to MC, we obtain:
=> k = 12
Accordingly, Vi should hire as many phone representatives as are required to produce an hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.
To know more about unitary method visit:
https://brainly.com/question/28276953
#SPJ1
Priya has a recipe for banana bread. She uses 7 1/2 cups of flour to make 3 loaves of banana bread. Andre will follow the same recipe. He will make b loaves of banana bread using f cups of flour. Which of these equations represents the relationship between b and f?
Answer:
Step-by-step explanation:
asdf
Sarah has 43 bananas, she gives Steve 10. How many bananas does she have left?
Answer:
33
Step-by-step explanation:
43-10=33 sarah has 33 bananas ledt
d. if a student was an undergraduate business major, what is the probability that the student intends to attend classes full-time in pursuit of an mba degree (to decimals)?
0.4
The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.
Learn more about probability.
brainly.com/question/30034780
#SPJ11
w(x)= -5(x-8)(x+4)
What is the maximum height that the stone will reach?
Answer:
(2, 180)
Step-by-step explanation:
w(x)=-5x^2+20x+160
a=-5 b=20
x=-20/2x(-5)
x=2
w(2)=180
2, 180
The difference of -12 - 45 will be?? postive or negitive or equle
Answer:33
Step-by-step explanation:45-12=33
GM is tangent to circle O at point G, and GS
is a secant line. If mGS = 84°, find
m/SGM.
Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.
What is secant line?Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.
the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:
m∠MGS = 90°
Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.
m∠SGM = 1/2 (mSE - mGE)
where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.
Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.
mSE = 2mGS
mSE = 2(84°) = 168°
m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°
Therefοre, m∠SGM = 84°.
To knοw more about secant line visit,
https://brainly.com/question/14438198
#SPJ1
rotate 270 degrees…what are the coordinates of B
PLS HELP
Answer:
8;-2
Step-by-step explanation:
8 is the x axis and -2 is the y axis
Answer:
Step-by-step explanation:
in general, which point size would you use if you wanted each character to be approximately one inch in size? a.) 1 pt b.) 72 pts c.) 24 pts d.) 36 pts
If you want each character to be approximately one inch in size, you would use a point size of 72 pts.
Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.
Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.
Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.
Therefore the correct answer is option b.) 72 pts.
To learn more about point size, refer:-
https://brainly.com/question/14052507
#SPJ4
A plane ticket to Barcelona cost £175 the price decreases by 6% work out the new price of the plane ticket
Answer:
£164.50
Step-by-step explanation:
If the discount is 6%, then the discounted price is 94% of the original price.
95% of £175 = 0.94 × £175 = £164.50
if a random sample of size 555 is selected, what is the probability that the proportion of persons with a retirement account will differ from the population proportion by less than 5% ? round your answer to four decimal places.
The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:
σ = sqrt((p*(1-p))/n)
where n is the sample size.
Substituting the values given in the question, we have:
σ = sqrt((0.5*(1-0.5))/555) = 0.0258
To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:
P(|p_hat - p| < 0.05)
where p_hat is the sample proportion.
We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:
P(|p_hat - p|/σ < 0.05/σ)
P(-0.97 < Z < 0.97)
where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:
P(-0.97 < Z < 0.97) = 0.8327
Rounding to four decimal places, we have:
P(|p_hat - p| < 0.05) = 0.8327
Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
Learn more about probability
https://brainly.com/question/30034780
#SPJ4
Near Pittsburgh, a cable car transports people from the Monongahela River valley to the community on top of the overlooking bluff. The Monongahela Incline has a grade of 78%. Find the measure of the angle the cable car track makes. with the valley floor. If necessary, round to the nearest degree.
The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
What is grade?The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.
To find the angle we use the trigonometric functions:
tan(θ) = grade = rise/run
Given that, the grade of the incline is 78%, then grade = 0.78.
θ = arctan(0.78) ≈ 38.7 degrees.
Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
Learn more about grade here:
https://brainly.com/question/29150359
#SPJ1
8. describe the center and spread of the chi-square distributions. 9. what is the chi-square test statistic? is it on the formula sheet? what does it measure? 10. how many degrees of freedom does the chi-square distribution have? 11. what is the rule of thumb for all expected counts in a chi-square goodness of fit test?
8. Spread = SD = sqrt(2*df)
9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.
10. Degrees of 1 freedom does the chi-square distribution.
11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.
8. Describe the center and spread of the chi-square distributions.
Shape - skewed right because can't be zero
µ = df = tipping point
mode = df - 2 = peak
spread = SD = sqrt(2*df)
9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.
10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.
11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.
Learn more about Chi- square distribution at:
https://brainly.com/question/30259945
#SPJ4
write down a model that allows the variance of u to differ between men and women. the variance should not depend on other factors.
The model will be as follows: y = b0 + b1x1 + b2x2 + u
To write a model that allows the variance of u to differ between men and women, the best option is to use the heteroscedasticity model. This model will enable the variances to differ between the genders without depending on other factors.
The model will be as follows: y = b0 + b1x1 + b2x2 + u, Where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model. However, this model does not allow the variance of u to differ between men and women.
To achieve this, we need to modify the model to allow the variance of u to differ between men and women. This can be done by using the weighted regression model. The model will be as follows: y = b0 + b1x1 + b2x2 + u, where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model.
The weights can be represented as: wi = 1/σ^2i, where: wi = weight for observation, iσi = standard deviation of the ith observation. This model will allow the variance of u to differ between men and women without depending on other factors.
To know more about variance refer here:
https://brainly.com/question/13708253
#SPJ11
A circle with radius of 2 cm sits inside a circle with of 4 cm
Answer:
Diameter is equal to twice the radius. Given, radius is 4 cm. Diameter = 2(4) = 8 cm. Hence, diameter of the circle with radius as 4 cm is 8 cm.
Step-by-step explanation:
please
give brianliest
Answer: Area = 0
Step-by-step explanation:
((2*2)*3.14)-(4*3.14) = 0
What is the product of (3x+2) and (x - 7) ?
The diameter of a softball is 3.8 inches. Estimate the volume within the softball. Round answers to the nearest
whole number and leave in the answer.
a. Volume: 73
b. Volume: 14
c. Volume: 9
d. Volume: 58
The volume of the ball is 9π (optionC)
What is volume of a sphere?A sphere is symmetrical, round in shape. It is a three dimensional solid, that has all its surface points at equal distances from the center.
The ball takes the shape of the sphere. The volume of a sphere is therefore calculated as ;
V = 4/3 πr³
r = d/2 = 3.8/2 = 1.9
V = 4/3 × π × 1.9³
V = 27.44 π/3
V = 9π ( nearest whole number)
therefore the volume of the ball is 9π (nearest whole number)
learn more about volume of a sphere from
https://brainly.com/question/10171109
#SPJ1
12. STEM An engineer is designing solar
panels for a rover that will explore
Mars. The solar panel unfolds to an
isosceles trapezoid. The length of
one leg is 0.1.x -0.5 meters, and the
length of the other leg is 0.3.x-2.1
meters. What is the length of each of
the legs of the solar panel?
Answer:
Step-by-step explanation:
Let's call the length of the shorter leg of the isosceles trapezoid "a" and the length of the longer leg "b".
From the problem, we know that:
a = 0.1x - 0.5 (length of one leg is 0.1.x - 0.5 meters)
b = 0.3x - 2.1 (length of the other leg is 0.3.x-2.1 meters)
Since we know that the trapezoid is isosceles, we know that a = b. So we can set the two expressions equal to each other:
0.1x - 0.5 = 0.3x - 2.1
Now we can solve for x:
0.2x = 1.6
x = 8
Now that we know x, we can substitute it back into the expressions for a and b to find their lengths:
a = 0.1(8) - 0.5 = 0.3 meters
b = 0.3(8) - 2.1 = 0.3 meters
Therefore, each of the legs of the solar panel are 0.3 meters long.
1. The orthocenter is outside the triangle. 2. An altitude is the same line segment as an angle bisector. 3. If the perpendicular bisector of one side of a triangle intersects the opposite vertex, then the triangle is isosceles
The solution of the match is
(1) Orthocenter (C) The point at which the altitudes of a triangle
meet.
(2) Centroid (D) The point at which the medians of a triangle
meet.
(3) Circumcenter (A) The point of intersection of the perpendicular
bisectors of the sides of a triangle.
(4) Incentre (B) The point at which the three angle bisectors
of a triangle meet.
The orthocenter of a triangle is the point where the altitudes of the triangle intersect. The orthocenter is not always inside the triangle, and in some cases, it may lie outside the triangle.
The centroid of a triangle is the point where the three medians of the triangle intersect. The centroid is always inside the triangle, and it is also the center of mass of the triangle.
The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect. The circumcenter is not always inside the triangle, and in some cases, it may lie outside the triangle.
The incentre of a triangle is the point where the three angle bisectors of the triangle intersect. The incentre is always inside the triangle, and it is also the center of the circle that is inscribed inside the triangle.
To know more about triangle here
https://brainly.com/question/8587906
#SPJ4
Complete Question:
Match the following.
(1) Orthocenter (A) The point of intersection of the perpendicular
bisectors of the sides of a triangle.
(2) Centroid (B) The point at which the three angle bisectors of
a triangle meet.
(3) Circumcenter (C) The point at which the altitudes of a triangle
meet.
(4) Incentre (D) The point at which the medians of a triangle
meet.
a study was conducted to evaluate the stress level of senior business students at a particular college. forty students were selected at random from the senior business class, and their stress level was monitored by attaching an electrode to the frontalis muscle (forehead). for the forty students, the mean emg (electromyogram) activity was found to be 35.8 microvolts. in addition, the standard deviation of the emg readings was found to be 2.5 microvolts. what would be the 99% confidence interval on the true mean emg activity for all seniors in the class? (you should be using statistical software such as statcrunch.) group of answer choices [34.7296, 36.8704] [34.7296, 36.7804] [34.7456, 36.0566] [34.9672, 36.7840]
The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]
To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula
CI = X ± Zα/2 (σ/√n)
where
X = sample mean = 35.8
Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.
σ = sample standard deviation = 2.5
n = sample size = 40
Substituting these values into the formula, we get
CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].
Therefore, the correct option is (a) [34.7296, 36.8704]
Learn more about confidence interval here
brainly.com/question/24131141
#SPJ4
The following statement should determine if x is not greater than 20. Explain what is wrong with it and write the correction. if (!x > 20)
The student's original statement has an issue in the way the "not" operator is used. The "not" operator (!) is negating the entire expression, including the variable 'x', rather than just the inequality. This leads to incorrect evaluation.
To correctly determine if x is not greater than 20, you should use the "less than or equal to" (<=) operator instead. Here is the corrected statement:
if (x <= 20)
This statement will be true if x is less than or equal to 20, which is the intended condition.
for such more questions on inequality
https://brainly.com/question/24372553
#SPJ11
Rewrite the expression 2(10+12) using the distributive property of multiplication over addition
The expression 2(10+12) can be rewritten as 44 using the distributive property of multiplication over addition.
The distributive property is a fundamental property of arithmetic that relates multiplication to addition and subtraction. The distributive property of multiplication over addition states that for any numbers a, b, and c
a( b + c ) = ab + ac
Using this property, we can rewrite the expression 2(10+12) as
2( 10 + 12 ) = 2(10) + 2(12)
Here, we have distributed the factor of 2 over the terms inside the parentheses, using the distributive property. This gives us:
2(10+12) = 20 + 24
Simplifying further, we get
2(10+12) = 44
Learn more about distributive property here
brainly.com/question/6276874
#SPJ4
when researching a population where it is impossible or impractical to compile a list of the elements, which sampling technique is appropriate to use?
When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique
Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.
Learn more about cluster sampling technique:https://brainly.com/question/11003935
#SPJ11