False, film and unprocessed digital raw files do not have a built-in tone curve that gives images an accurate level of contrast automatically, it is typically adjusted during post-processing.
What does contrast mean?
Contrast refers to the degree of difference between the lightest and darkest parts of an image, often described as the range of tones from white to black. In photography and visual arts, contrast can be used to create visual interest, emphasize certain elements, and make an image appear more dynamic. High contrast images have a greater difference between the lightest and darkest areas, while low contrast images have a more even distribution of tones. The level of contrast in an image can be adjusted through various techniques during post-processing to achieve the desired look.
Film and unprocessed digital raw files do not have a built-in tone curve that gives the images an accurate level of contrast automatically. They may have default settings that are applied during image capture, but these can be adjusted or disabled during post-processing. The tone curve is typically applied during post-processing to adjust the contrast and tonality of the image to achieve the desired look.
To know more about digital files visit:
https://brainly.com/question/29359430
#SPJ1
suppose you want to put the six bit value 111101into a des s-box.what is the corresponding row of the s-box substitution table?
The six-bit value 111101 in a DES S-box has a corresponding row of 15 in the S-box substitution table.
What is the S-box substitution table?
An S-box substitution table is a table used in cryptography to substitute bit values. It is used in the Data Encryption Standard (DES) as well as in Advanced Encryption Standard (AES). S-box substitution tables are used in various encryption methods to substitute bit values, resulting in the permutation of data. In the Data Encryption Standard, substitution boxes or S-boxes are used to perform the substitution of bit values in encrypted messages. Substitution is a cryptographic operation in which each bit in a value is replaced with another bit. The substitution is performed using S-box substitution tables, which are specific to each round of encryption.
Here is the S-box substitution table for the Data Encryption Standard:
This is the S-box substitution table for the DES with bit values ranging from 0 to 15. The six-bit value 111101 in a DES S-box has a corresponding row of 15 in the S-box substitution table. The sixth bit of the S-box input value determines the row, while the first and last bits are used to determine the column of the S-box substitution table. The row number is calculated by taking the first and last bit of the S-box input value, while the column number is calculated using the four middle bits of the input value. Therefore, the corresponding row number for 111101 is 15.
To know more about S-box substitution: https://brainly.com/question/8818466
#SPJ11
Kay is researching the health benefits of avocados.She finds an article on the website tracyshealthproducts.com.Which of the following can assure Kay that the content is credible?
A) The site sells products made from avocados.
B) The article's author has been a nutritionist for the last three years.
C) The firm that runs the site is located four blocks from her home.
D) The author has over 8,000 connections on LinkedIn.
The option that can assure Kay that the content is credible is B) The article's author has been a nutritionist for the last three years.
This option indicates that the author has professional experience and expertise in the subject matter. It suggests that the author has likely undergone training and has knowledge in nutrition, which could make their article more credible.
However, it's still important for Kay to critically evaluate the article's content, sources, and information to determine its accuracy and reliability. Additionally, Kay should look for additional sources and information to corroborate the information presented in the article.
Thus, option (B) The article's author has been a nutritionist for the last three years.
You can learn more about credibility of content at
https://brainly.com/question/1279931
#SPJ11
A company has tasked a network administrator with running Ethernet cabling in an enterprise and is told to use the most popular type of network cable with an insulated jacket. Which of the following should the administrator use?
a. UTP
b. Port scanner. c. Network sniffer.
The network administrator tasked with running Ethernet cabling in an enterprise should use UTP (unshielded twisted pair) cable with an insulated jacket.
Explanation:
What is Ethernet?
Ethernet is a set of protocols for connecting devices to form a local area network (LAN). It uses a wired connection and is typically faster and more reliable than wireless connections. Ethernet requires network cables to transmit data between devices.
What is a network cable?
A network cable is a cable used to connect devices on a network. It typically has connectors on each end that plug into Ethernet ports on devices like computers, routers, and switches. The most common types of network cables are UTP and STP.
What is an insulated jacket?
An insulated jacket is a protective coating around the outside of a cable. It provides protection against damage from physical wear and tear, environmental factors, and interference. The most common type of insulated jacket for network cables is PVC (polyvinyl chloride).
The network administrator tasked with running Ethernet cabling in an enterprise should use UTP (unshielded twisted pair) cable with an insulated jacket. This is the most popular type of network cable used for Ethernet connections.
Learn more about UTP here:
https://brainly.com/question/15123056
#SPJ11
users can customize sparklines in excel 2019 using which items? check all that apply group of answer choices
Color, line weight, and axis display are some of the items that users can customize sparklines in Excel 2019.
Users can customize sparklines in Excel 2019 using the following items:
Sparkline Type: Users can choose from different types of sparklines such as Line, Column, and Win/Loss to display their data.Sparkline Style: Users can select from various styles that include different colors, borders, and shading effects for their sparklines.Data Range: Users can select the data range for their sparklines, which determines the data that will be displayed in the sparkline.Axis Options: Users can customize the minimum and maximum values, as well as the axis type and labels for their sparklines.Sparkline Location: Users can choose the location of their sparklines within the worksheet, either in a cell or in a range of cells.Sparkline Group: Users can group multiple sparklines together for easier viewing and manipulation.Learn more about customize sparklines here:
brainly.com/question/29832130
#SPJ1
which is not a key component of building string security into the software development life cycle (sdlc)?
The answer choice that is not a key component of building string security is D. Regular password changes
How does this help?Regular password changes are not a key component of building string security into the software development life cycle (SDLC). While password security is important, it is not a software development process and does not address the security of the software itself.
The other options, threat modeling, penetration testing, and unit testing, are all essential components of building secure software.
Threat modeling identifies potential threats and vulnerabilities, penetration testing verifies the effectiveness of security controls, and unit testing ensures that code is functioning as expected and without security flaws.
Read more about string security here:
https://brainly.com/question/14546219
#SPJ1
which is not a key component of building string security into the software development life cycle (sdlc)?
A. Threat modeling
B. Penetration testing
C. Unit testing
D. Regular password changes
you are currently learning about networking devices and have just learned about mac addresses. you look up your device's mac address, and it comes back as 00-b0-d0-06-bc-ac. which portion of this mac address can tell you who the manufacturer is?
In a MAC (Media Access Control) address, the first 3 octets (6 hexadecimal digits) represent the Organizationally Unique Identifier (OUI), which can be used to identify the manufacturer or vendor of the network device.
In the given MAC address 00-b0-d0-06-bc-ac, the OUI is "00-b0-d0", which is assigned to Intel Corporation. This means that the network device was manufactured by Intel, or at least its network interface was produced by Intel. The remaining 3 octets in the MAC address (06-bc-ac) represent the device's unique identifier within that manufacturer's product line.
An exclusive identification code given to a network interface controller to be used as a network address in communications inside a network segment is called a media access control address. Ethernet, Wi-Fi, and Bluetooth are just a few of the IEEE 802 networking technologies that frequently employ this application.
Learn more about MAC address here brainly.com/question/27960072
#SPJ4
van is the it administrator at alphina systems. he wants to be able to plug and unplug his hardware devices without using the safely remove hardware option. what should ivan do?
As an IT administrator at Alphina systems, what should Van do if he wants to be able to plug and unplug his hardware devices without using the safely remove hardware option
The use of hardware devices and peripherals has become increasingly important in the modern age. Hardware devices, such as a computer mouse, keyboard, printer, and others, have a big role to play in the overall functionality of your system. If Van, the IT administrator at Alphina Systems, wants to unplug and plug his hardware devices without using the "Safely Remove Hardware" option, he should take the following steps:Make sure that the device supports the plug-and-play feature before connecting it to the computer's USB port.Insert the device into an available USB port on the computer.When the device is connected, the system will detect it and automatically install the device's drivers.Wait for the driver installation process to complete, and the device will be ready to use.On Windows computers, it is not recommended to unplug hardware devices without using the "Safely Remove Hardware" option. However, if Van still wishes to unplug the device without using this option, he should be aware of the potential consequences, such as data corruption or other system errors.
Ivan should enable "hot swapping" or "hot plugging" for his hardware devices at Alphina Systems. This will allow him to safely plug and unplug his hardware without using the "Safely Remove Hardware" option.
Learn more about hardware devices here;
https://brainly.com/question/14837314
#SPJ11
a) draw the runtime stack after each line executes under static scoping. what value assigned to z in line 12? b) draw the runtime stack after each line executes under dynamic scoping. what value assigned to z in line 12?
Runtime stack for Static Scoping, the value of the z variable at line 12 is 20, and the Runtime stack for Dynamic Scoping, the value of the z variable at line 12 is 10.
As per the given question, we need to create a runtime stack for both Static and Dynamic Scoping, respectively. And the value of the z variable on line 12 needs to be evaluated. Now, let's proceed with the solution:
Static Scoping: In Static scoping, the variable declared in the outer block retains the same value for all the inner blocks. That means, the variable is not changed by the inner block. Hence, z = 20, will remain the same throughout the program.
Here's the value of the z variable at line 12: 20
Dynamic Scoping: In Dynamic scoping, the variable declared in the inner block, overwrites the variable declared in the outer block. Hence the value of the z variable at line 12 will be 10.
Here's the value of the z variable at line 12: 10
To learn more about "dynamic scoping", visit: https://brainly.com/question/31107091
#SPJ11
what solution puts the stolen vehicles database in 3nf by breaking up this one big table into several tables?
To convert the stolen vehicles database into 3NF (Third Normal Form), the big table should be broken down into several smaller tables that contain the necessary information.
The process involves the following steps:
1. Identify the columns that contain the same data in multiple records, and create a new table for each of these columns.
2. Make sure that each table contains a primary key that uniquely identifies a record, as well as other attributes which together form a composite key.
3. Define relationships between tables, either one-to-one or one-to-many.
4. Make sure that each table contains only the information that is necessary for it, and that all other data is moved to other tables.
5. Check for anomalies such as insertion, update, and deletion, and take care of them by creating more tables or modifying the existing ones.
By following these steps, the big table can be broken down into several smaller tables and the stolen vehicles database can be converted into 3NF.
You can learn more about 3NF at: brainly.com/question/13967439
#SPJ11
one difference between arraylist and arrays is that you can have arrays of primitive types as well as objects, whereas areaylist can only contain objects true or false?
One difference between ArrayList and arrays is that you can have arrays of primitive types as well as objects, whereas ArrayList can only contain objects; the statement is true.
What is an array?An array is a collection of similar data types. Java arrays are objects that store a fixed number of elements of a single data type. Java arrays are also known as static data structures since they can only hold the same number of elements throughout their lifetime.
What is ArrayList?An ArrayList, on the other hand, is a class that is part of the Java Collection Framework. This class is used to store a collection of objects that can be modified dynamically. ArrayList is frequently used as a substitute for Java arrays. ArrayLists are an instance of the List interface in Java.
The ArrayList class, like other classes in the Java Collection Framework, allows you to add, remove, search, sort, and replace elements in the collection. Furthermore, an ArrayList can be of any size since its size can be expanded dynamically based on the needs of the application.
In conclusion, one difference between ArrayList and arrays is that you can have arrays of primitive types as well as objects, whereas ArrayList can only contain objects.
Learn more about array: https://brainly.com/question/28061186
#SPJ11
what nec article should be followed to determine the maximum allowable number of wires or cables permitted in cable trays?
According to NEC (National Electrical Code) article 392, the maximum allowable number of wires and cables that can be placed in a cable tray is determined by the derated ampacity of the cables in the tray, based on the length and type of cable used.
The derated ampacity of the cables in the tray must not exceed the ampacity of the cable tray at the conductor temperature rating. The derated ampacity of the cables is determined by the type and size of the cables and the length of the run.
To determine the maximum allowable number of wires or cables in a cable tray, calculate the ampacity of the cable tray based on the type of cable tray being used. Then, calculate the derated ampacity of the cables based on the type and size of the cables and the length of the run. The derated ampacity of the cables must not exceed the ampacity of the cable tray at the conductor temperature rating. This will determine the maximum number of wires or cables that can be placed in the tray.
In summary, according to NEC article 392, the maximum allowable number of wires or cables permitted in a cable tray is determined by the derated ampacity of the cables in the tray, based on the length and type of cable used. The derated ampacity of the cables must not exceed the ampacity of the cable tray at the conductor temperature rating.
You can learn more about ampacity at: brainly.com/question/14395211
#SPJ11
you just received a notification that your company's email servers have been blocklisted due to reports of spam originating from your domain. what information do you need to start investigating the source of the spam emails?
The information you should gather to start the investigation of spam emails is Blocklist Information, Email Server Logs, Email Content.
Check your email server logs to see if there are any unusual activities or patterns. Look for any spikes in outbound email traffic or unusual email content. This can help you identify which email accounts are sending spam.Check the reputation of your email server and IP address using online reputation tools. This can help you determine whether your IP address has been blacklisted by other email providers.
Another choice is to open the server log file in HTML using a web browser. It might be necessary to drag and drop the file into a browser window tab. The utility program Event Viewer offers greater capabilities than the other solutions when it comes to viewing Windows server log files.
Learn more about spam emails: https://brainly.com/question/29827400
#SPJ11
to reduce costs, a company wants to slowly transition and eventually eliminate their dependency on their own hardware, datacenter, and it personnel to manage the data center. what would you initially recommend?
The first step to reducing costs for a company wanting to eliminate its dependency on its own hardware, data center, and IT personnel are to investigate cloud computing options.
Cloud computing provides a way for businesses to access their computing resources virtually, eliminating the need for their own hardware and data center. Additionally, cloud computing can also help reduce the need for IT personnel to manage the data center, as it is typically managed by the cloud provider.
To start, it is important to consider the applications that the company needs to run and then determine if these can be hosted in the cloud. Some applications are more suited to cloud computing than others and may require changes or adjustments in order to work optimally. Companies should also consider their security and compliance requirements when researching cloud options.
Once the company has evaluated the cloud options, it can start to transition its workloads to the cloud, allowing them to take advantage of the cost savings and benefits that come with it. It is important to monitor the performance of the applications after the transition to ensure that everything is running smoothly. Additionally, the company should continually evaluate its cloud options to ensure they are getting the best value for its money.
You can learn more about Cloud computing at: brainly.com/question/29737287
#SPJ11
which of the following type of security controls involves installing bollards? directive preventive corrective detective deterrent
The type of security controls involves installing bollards is deterrent.
What is the security controls?Directive controls are a type of security control that provide specific direction or instruction to individuals or organizations about what actions they should take or avoid to reduce security risks. They are often implemented through policies, procedures, guidelines, or regulations that govern behavior or actions related to security.
Therefore, Installing bollards is a physical security measure that can be used to prevent unauthorized access or protect against physical threats, such as ramming attacks or vehicle-borne improvised explosive devices.
Learn more about security controls from
https://brainly.com/question/28436055
#SPJ1
which of the following statements are valid? a constructor can return a integer a constructor can return a char a constructor cannot return anything a constructor can return a void
Out of the given statements, the following statements are valid for a constructor: a constructor cannot return anything and a constructor can return a void.
Know what is a constructor! A constructor is a method that has the same name as the class in which it is located. When an object is created, the constructor is called, which initializes the object's values.
Constructors are used to provide initial values for the object's state (the values of instance variables) and to allocate memory for the object. A constructor does not have a return type because it returns an instance of the class it belongs to. Therefore, statement (c) "a constructor cannot return anything" is valid. A return type may be defined for a method in Java, which specifies the data type that the method will return after execution. Constructors, on the other hand, never specify a return type because they always return a reference to an instance of the class. Furthermore, it is not necessary to explicitly declare constructors because Java automatically creates a default constructor if one is not specified. Since the default constructor does not have any parameters, it initializes all variables to their default values, making it possible to construct objects without having to specify any values, making statement (d) "a constructor can return a void" valid.Learn more about constructor visit:
https://brainly.com/question/29999428
#SPJ11
T/F: News360 is a search engine because it gathers, organizes, and then distributes web content.
The given statement "News360 is a search engine because it gathers, organizes, and then distributes web content." is false because News360 is not a search engine. It is a personalized news aggregator and content discovery platform.
News360 is not a search engine. While it gathers, organizes, and distributes web content, it does not primarily function to search for and index content across the web like a search engine such as Goo-gle or Bi-ng. Rather, News360 is an AI-powered news aggregator that uses machine learning algorithms to curate news articles from various sources based on a user's interests and reading history.
You can learn more about search engine at
https://brainly.com/question/512733
#SPJ11
Rachel works for a large graphic design firm. She is making a poster to notify people about an upcoming graphic design seminar. Which type of poster is she making?
Rachel is creating an _______ poster to notify people about the upcoming graphic design seminar.
Answer:
a eye- catching poster
Explanation:
sorry if its wrong
information technology managers are often in a bind when a new exploit (or software vulnerability) is discovered in the wild. they can respond by updating the affected software or hardware with new code provided by the manufacturer, which runs the risk that a flaw in the update will break the system. or they can wait until the new code has been extensively tested, but that runs the risk that they will be compromised by the exploit during the testing period. dealing with these issues is referred to as
The term that refers to the process of dealing with issues that arise when a new software vulnerability is discovered in the wild is known as Risk Management.
Information technology managers are often in a quandary when a new exploit or software vulnerability is discovered in the wild. They can choose to update the affected software or hardware with the new code provided by the manufacturer, which carries the risk that a flaw in the update will break the system. Alternatively, they can wait until the new code has been extensively tested, but that runs the risk that they will be compromised by the exploit during the testing period.
Risk management refers to the process of identifying, analyzing, and mitigating risks that might adversely affect an organization's ability to achieve its goals. It also entails risk evaluation and prioritization of risks to control or eliminate them. It is necessary to have risk management procedures in place in the event of an unexpected exploit or software vulnerability.
The aim of risk management is to guarantee that the organization is aware of, understands, and handles the hazards it encounters to achieve its objectives.
You can learn more about Risk Management at: brainly.com/question/4680937
#SPJ11
what windows tool is used to test the end to end path between two ip hosts on different ip networks?
The Windows tool used to test the end-to-end path between two IP hosts on different IP networks is called the PathPing tool.
PathPing is used to send packets to each router in the path of the two hosts and report back statistics such as the amount of time taken to complete the ping request. It combines the functionality of traceroute and ping. To use PathPing, open the command prompt, type “PathPing” followed by the destination IP address, and hit enter. PathPing will then show a detailed report about the path it took to reach the destination host, including the number of hops and the latency in milliseconds.
PathPing can be useful in diagnosing packet loss on a specific route, as well as determining the most reliable route to take.
You can learn more about PathPing at: brainly.com/question/13273622
#SPJ11
Simon has difficulty pressing and holding more than one key at a time, such as CTRL+ALT+DEL. What setting can he change to make this task easier?
Simon has difficulty pressing and holding more than one key at a time, such as CTRL+ALT+DEL. To make this task easier, he can change the setting called Filter Keys.
Filter Keys is a Windows accessibility feature that lets you slow down the keyboard or ignore repeated keystrokes to make typing easier. The filter keys feature ignores brief or repeated keystrokes, as well as keyboard bounce.
To turn on Filter Keys, follow the steps below:Click the Windows Start button and choose the "Settings" option.From the list of settings, choose "Ease of Access."Click the "Keyboard" button on the left-hand side of the window.Select the "Use Filter Keys" option to activate it.Under the "Options" button, make the changes as per your preference or leave the default settings.On the same window, you can activate the "Turn on Filter Keys" switch or hit the "Shift" button five times to enable the feature.By using this method, Simon will be able to use his keyboard effectively and complete the CTRL+ALT+DEL combination with ease.
You can learn more about Windows accessibility feature at
https://brainly.com/question/30721226
#SPJ11
Consider the following networked computers connected by Bridge X and Y. Bridge X has interface 1,2 and3. Bridge Y has interface 1 and 2. Assume at the beginning the address tables of Bridge X and Y are all empty. Write down the address tables of Bridge X and Y after the following communication finished 1. A send a packet to C 2. B send a packet to D 3. C send a packet to E 4. E send a packet to A 5. D send a packet to A Bridge X Bridge Y Figure 1 Bridge X Bridge Y Address Interface Address Interface
The address tables of Bridge X and Y after the communication is as follows:Bridge XBridge X Interface AddressTable1 F 2 3Y 2 3Bridge YBridge Y Interface AddressTable1 C 1D 2E 1A 2Explanation:A.
A sends a packet to CAt the beginning of the communication, Bridge X and Y address tables are all empty. So, when A sends a packet to C, Bridge X searches its address table for C’s address. Since it can't find the address, Bridge X floods the packet out of all three interfaces (1, 2, and 3). Bridge Y receives the broadcast packet on interface 1, looks at the source address of A, and updates its address table with A's address.
It then forwards the packet out of interface 2, which is connected to C. Bridge X receives the packet back from interface 2 and updates its address table with C's address and then forwards it out of interface 3 which is connected to E.B. B sends a packet to DBridge X and Y already have D's address in their address table since D has already sent packets to A. So when B sends a packet to D, Bridge X forwards it out of interface 2 which is connected to D. Bridge Y receives the packet on interface 1, looks at the source address of B, and updates its address table with B's address.
It then forwards the packet out of interface 2 which is connected to D.C. C sends a packet to ESince Bridge X already has E's address in its address table, it forwards the packet out of interface 3 which is connected to E. Bridge Y doesn't have E's address in its address table so it floods the packet out of all of its interfaces.D. E sends a packet to ABridge X has A's address in its address table, so it forwards the packet out of interface
2. Bridge Y already has A's address in its address table since it received a packet from A, so it forwards the packet out of interface 1.E. D sends a packet to ABridge X has A's address in its address table, so it forwards the packet out of interface 2. Bridge Y already has A's address in its address table since it received a packet from A, so it forwards the packet out of interface 1.
You can read more about communication at https://brainly.com/question/28153246
#SPJ11
a design defines how to organize information in the files, records, and fields, which is also called
The process of organizing information in files, records, and fields is also known as data design.
Data design involves the arrangement of information into meaningful categories and an understanding of how the categories are related to each other. This can include decisions about the size, type, and format of data fields, as well as the storage and retrieval of data.
Data design is essential for creating efficient and user-friendly databases. It involves creating a data structure that allows the user to quickly and easily access, modify, and manage data. Data design is also important for maintaining the integrity and security of the data, as it ensures that data is stored in an organized and consistent manner.
To create an effective data design, a few factors must be considered. The data design should take into account the data types and characteristics, the user’s requirements and preferences, the expected input and output data, and the frequency of updates. Additionally, the data design must also account for data integrity and security, as well as any hardware or software limitations.
In summary, data design is an important process that involves organizing information into meaningful categories and understanding the relationships between them. Data design should consider the data types and characteristics, the user’s requirements, expected input and output data, frequency of updates, data integrity, and security. Ultimately, data design should be tailored to the user’s needs and be designed for the most efficient storage, retrieval, and manipulation of data.
You can learn more about data design at: brainly.com/question/14035783
#SPJ11
_________ is a simple but incomplete version of a method.A. A stubB. A main methodC. A non-main methodD. A method developed using top-down approach
A stub is a simple but incomplete version of a method. A: "stub" is the correct answer.
A stub is a small piece of code that substitutes for an object and returns specified values. Stubs can be used in software development to simulate the behavior of future software components, thus allowing one component's development to proceed while the other's progress is still in the works.
A stub is a piece of code that mimics a real component but provides predetermined responses. It's a fake application for an absent component that allows the testing of a feature that depends on that component. The stub helps to isolate the dependent software module for more effective testing by controlling its input and output parameters. When writing software code, a stub is often used to generate test data.
Option A: stub is corrcet choice.
You can learn more about stub at
https://brainly.com/question/30451439
#SPJ11
what is the audience segmentation database called that we looked at in the lecture? group of answer choices criteria dma clarity target claritas prizm clarion color
Answer:
Claritas Prizm.
Explanation:
Use ChatGPT
if the power connector from the cpu fan has only three pins, it can still connect to the 4-pin header, but what functionality is lost?
Yes, a three-pin power connector from the CPU fan can still connect to the four-pin header, although functionality is lost.
Specifically, the fourth pin from the four-pin header carries a sense line which enables the system to determine the speed of the fan and control it accordingly. Without the fourth pin, the fan will run at a constant speed and will not be regulated by the system.
The four-pin header has three main pins, namely, the +12V, GND, and PWM. The +12V pin carries the power to the fan while the GND pin provides the ground connection. The PWM pin is used to control the speed of the fan. The fourth pin carries a sense line which allows the system to monitor the speed of the fan. Without this fourth pin, the fan will spin at a constant speed regardless of the heat generated by the CPU.
To connect a three-pin power connector to the four-pin header, the sense line (fourth pin) must be bridged with the ground connection (GND). This means the fan will run at full speed, without the system being able to regulate the speed of the fan according to the amount of heat generated by the CPU. This can have a negative impact on the cooling system's efficiency and performance.
In conclusion, a three-pin power connector from the CPU fan can still connect to the four-pin header, but functionality is lost as the sense line (fourth pin) cannot be used to regulate the speed of the fan. Without the sense line, the fan will spin at full speed regardless of the amount of heat generated by the CPU.
You can learn more about CPU fan at: brainly.com/question/30747737
#SPJ11
write a command that lists all unique source ip addresses (3rd column, only 4 numbers separated by dots) along with the number of occurrences in the file (in the source column).
The command that is used to list all unique source IP addresses (3rd column, only 4 numbers separated by dots) along with the number of occurrences in the file (in the source column) is:
awk '{print $3}' filename.txt | sort | uniq -c | sort -nr
This command will first print the third column (source IP addresses) of the file using awk.
Then, it will sort the IP addresses using the sort command.
After that, it will count the number of occurrences of each IP address using the uniq command, and finally, it will sort the list in descending order based on the number of occurrences using the sort command.
Here, the filename.txt is the name of the file where the source IP addresses are located. This command can be executed in the terminal or command prompt of the system where the file is located.
To know more about IP address: https://brainly.com/question/14219853
#SPJ11
which of the following is not an analog device? group of answer choices tape recorder musical instrument laptop video projector
The answer to the question "which of the following is not an analog device?" is "laptop."
Analog devices are devices that transmit signals that vary continuously over time and are continuous. They may include devices such as tape recorders, musical instruments, and video projectors. However, laptops are not classified as analog devices. They are a type of digital device. Digital devices are electronic devices that store, process, and retrieve digital data using digital circuits. These devices operate on a binary system, which means that the information they process is represented by a series of zeros and ones. Digital devices are commonly used in computer technology to process, store, and transmit data. They are also used in audio and video recording devices to store and manipulate data in a digital format that can be easily accessed and processed using software tools.So, among the given options, the laptop is not an analog device.
Learn more about Analog devices here:
https://brainly.com/question/2735822
#SPJ11
what is the powershell command to export the last five powershell command history statements to a text file called history.txt?
The PowerShell command to export the last five PowerShell command history statements to a text file called history.txt is: Get-History -Count 5 | Out-File -FilePath "history.txt"
The Get-History command in PowerShell is used to display the command history for the current session. To export the last five PowerShell command history statements to a text file called history.txt, we can use the Get-History command in combination with the Out-File command with the -FilePath parameter. The command would look like this: Get-History -Count 5 | Out-File -FilePath "history.txt".
The -Count parameter specifies the number of history entries to retrieve, and the | (pipeline) operator is used to send the output of the Get-History command to the Out-File command. The -FilePath parameter specifies the name and location of the file to save the output to.
To learn more about PowerShell; https://brainly.com/question/30502261
#SPJ11
what is a miner? an algorithm that predicts the next step in a blockchain. a type of blockchain. a computer user who validates and processes blockchain transactions. a person who is authorized to delete blocks from a blockchain.
A miner is a computer user who validates and processes blockchain transactions. They use their computing power to solve complex mathematical equations and add new blocks to the blockchain.
Miners are incentivized to do this work through the reward of cryptocurrency for their efforts. Blockchain is a decentralized, digital ledger of transactions that is distributed across a network of computers. Each block in the chain contains a record of several transactions and a unique code, called a hash, that identifies the block and all the transactions within it. Once a block is added to the chain, it cannot be altered or deleted, making it a secure and tamper-proof record of all transactions on the network.
Learn more about cryptocurrency: https://brainly.com/question/30628361
#SPJ11
7.5 code practice help I do not understand how to get the 81666.6666667 as the answer for Your average award money per gold medal was. The program works except for that.
The most probable reason why the output of your program was 81666.6666667 is because you made use of "float" or "double" instead of "int"
What is a Floating Point output?This happens when the program performs some arithmetic or mathematical operations that involve division or decimal numbers, which results in the floating-point output.
For example, if the program calculates the average of three numbers, where the numbers are 80000, 82000, and 81000, the result would be 81666.6666667.
You should make use of "int" which gives input only in whole numbers without decimals or floating point numbers.
Read more about programming here:
https://brainly.com/question/26134656
#SPJ1