The primary sound of a musical tone is frequency, which is determined by the length or size of the vibrating medium.
What do you mean by frequency?The number of times a repeated event occurs in a given amount of time is known as its frequency. The number of cycles or vibrations per unit of time is the definition of frequency for cyclical phenomena like oscillations, waves, or simple harmonic motion. It is also occasionally referred to as temporal frequency to emphasize the contrast to spatial frequency and ordinary frequency to emphasize the contrast to angular frequency. Hertz (Hz), which is equal to one (event) per second, are the units used to express frequency. The reciprocal of frequency, the period is the length of time occupied by one cycle in a repeating event.
To know more about frequency, visit:
https://brainly.com/question/14316711
#SPJ4
a golf ball of mass 0.05 kg travels down the fairway with a velocity of 60m/s what is teh kinetic energy
The kinetic energy will decrease by 4J.
The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
first-order kinetic energy KE i\s =0.5×m×v
Final Kinetic Energy = 0.5 mV (K.E. 1/2 0.5(3355) =
2/2 KE difference = KE f-KE i
KE difference
Difference in KE = 1/4(925)
Difference in KE = -16/4 = 4J.
Consequently, kinetic energy will decrease by 4J.
Learn more about kinetic energy here-
https://brainly.com/question/12669551
#SPJ4
Please help! I’ve been doing this for 2 hours I want to be done!
Answer:
Both are chemical changesBoth conserve massExplanation:
Angela runs 30 minutes every day, but her 5k race time is staying the same, and she is not having fun anymore. What should she do to improve?
She should add diversity to her exercise program to keep her from getting bored or lazy.
Because if you are not having fun with it anymore then you stop doing it.Your weekly exercise running mileage should drop the week before the event. Your training now mostly focuses on "saving up" rest so that your legs are prepared for the marathon.
To keep your legs fresh throughout the week, fit in two to three quick runs with a few quick pick-ups—short, snappy portions that get your legs working faster and get you ready for the faster tempo of the race. Take a day off to completely rest two days before the marathon. Do a quick exercise(20-minute) run with up to five 45-second pick-ups the day before the race to tone your legs.
Learn more about exercise program here;
https://brainly.com/question/10496467
#SPJ9
What happens to the time to complete a movement if angular velocity is increased?
The time to complete a movement if angular velocity is increased is Angular speed
Angular speed is the price of speed at which an object or a particle is rotating round a middle or a specific factor in a given time period. it's also referred to as rotational pace. Angular pace is measured in attitude in keeping with unit time or radians per second (rad/s). The fee of alternate of angular speed is angular acceleration. let us analyze in extra element approximately the relation among angular speed and linear pace, angular displacement and angular acceleration.Angular pace plays an eminent position within the rotational movement of an item. We already understand that in an item showing rotational movement all the particles circulate in a circle. The linear pace of each collaborating particle is without delay associated with the angular velocity of the entire item.those become as vector products relative to each other. basically, the angular velocity is a vector amount and is the rotational speed of an object. The angular displacement of in a given period of time gives the angular velocity of that item.
Learn more about Angular pace https://brainly.com/question/24357233
#SPJ4
which of the following are the 2 postulates of relativity? (the other choices are consequences of relativity) a. the laws of nature are the same for all observers in uniform motion. b. the length of a moving object is not the same as when it is at rest. c. the speed of light is constant for all observers in uniform motion. d. two events that happen at the same time in one frame, can happen at different times in another frame. e. e
The correct answer is Option A and C.
The idea that the rules of physics are the same and can be expressed in their most basic form in all inertial frames of reference is the first postulate of special relativity. The assumption that the speed of light, or c, is a constant regardless of the source's relative motion is known as the second postulate of special relativity.
What are Albert Einstein postulates?
In all inertial reference frames, the rules of physics take the same form. Independent of the observer's speed, light moves across empty space at a specific speed (or source). The gravity formalism should be consistent with Newtonian gravity at low speeds.To learn more about postulates of relativity refer the link:
https://brainly.com/question/16600160
#SPJ4
please answer cause im not sure thx
Answer: B
Explanation:
R=A+B
A goes south
B goes east
R=
A+B=
South+East=Southeast ==> B
Answer:
B
Explanation:
Vectors are drawn as lines with arrowheads on them.
Vectors can be added together by drawing the arrows nose to tail.
To add vectors A and B, place the tail of vector B at the nose of vector A (see attached diagram).
The single vector that goes from the start to the end of the combined vectors is called the resultant vector.
As R = A + B, then R is the resultant vector of A and B.
R starts at the tail of vector A and goes to the nose of vector B.
She varies the level of noise in the environment and records the blood pressure of each participant. In this experiment, the level of noise is the
It appears that subjective qualitative measurements are insufficient indicators to determine how noise affects cognitive function.
It is highly advised to use novel indicators, such as brain signal analysis and power spectral density analysis, while evaluating cognitive function while exposed to noise. It is recommended that more research be done on the impacts of additional psychoacoustic factors, such as tone and noise pitch (treble or bass) at high exposure levels. "Attention" refers to the active cognitive selecting process. Daily tasks include physical motions, emotional reactions, and perceptual and cognitive processes all heavily depend on attention. When processing of quantitative information is constrained, the attention system regulates behavior of people based on spatial and temporal aspects.
Learn more about attention here-
https://brainly.com/question/14484731
#SPJ9
sketch a velocity -time graph for a body thrown vertically upward to a maximum height
The velocity time graph for a body thrown vertically upward to a maximum height is given below:
What is velocity?
The pace at which an object's position changes as perceived from a particular point of view and as measured by a particular unit of time (for example, 60 km/h northbound) is defined as its velocity. Velocity is a fundamental concept in kinematics, the branch of classical mechanics that deals with the motion of bodies.
In order to be defined, the physical vector quantity known as velocity needs to have both a magnitude and a direction. Speed is a coherent derived unit whose quantity is measured in metres per second (m/s or m/s1) in the SI. Speed is the scalar absolute value (magnitude) of velocity (metric system). "5 metres per second," for example, is a scalar as opposed to "5 metres per second east," which is a vector.
to know more about velocity
brainly.com/question/18084516
#SPJ9
a rigid tank is divided into two equal parts by a partition. one part of the tank contains 2.5 kg of compressed l
Complete question
A rigid tank is divided into two equal parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 400 kPa and 60
60 ∘ C while the other part is evacuated. The partition is now removed, and the water expands to fill the entire tank. Determine the entropy change of water during this process, if the final pressure in the tank is 40 kPa.
Water expands to fill the entire tank. For a final pressure of 10 kPa, the final water temperature is 60°c and the tank volume is 2245.4.
The energy balance:
[tex]E_{in} -E_{out} =[/tex] Δ[tex]E_{system}[/tex]
So, therefore
0 = ΔU [tex]mm(u_{2} -u_{1} )[/tex]
[tex]u_{1} =u_{2}[/tex]
Water's characteristics are listed in tables A = 4 and A-6.
[tex]p_{1} = 600 kpa[/tex]
[tex]T_{1}[/tex] = 60°c
⇒ [tex]v_{1} = v_{f}[/tex]
⇒ 60°c = 0.001017
⇒ [tex]u_{1} =u_{f}[/tex]
⇒ 60°c = 251.16
Confirmed whether we receive quality between 0 and 1.
[tex]P_{2}[/tex] = 10kpa
[tex](u_{2}-u_{1} )[/tex]
We have [tex]v_{f}[/tex] = 0.001010,
v = 14.670
[tex]u_{f}[/tex] = 191.79,
[tex]v_{f}[/tex] = 2245.4
So, therefore, water expands to fill the whole tank. For a final pressure of 10 kPa, the very last water temperature is 60°c and the tank quantity is 2245.4.
Know more about energy balance:
https://brainly.com/question/15318876
#SPJ4
Question 12 an earth satellite has a speed of 7.5 km/s and a flight path angle of 10 degrees when its radius is 8000 km. what is the angular momentum (in km 2/s)?
-21.7 km²/s is the angular momentum (in km 2/s) of the earth's satellite.
What is a satellite?
An object that has been sent into orbit in space on purpose is known as a satellite or artificial satellite.Most spacecraft, with the exception of passive satellites, contain a means of generating power for the technology they carry, such as solar panels or radioisotope thermoelectric generators (RTGs).The majority of satellites also feature transponders, which are a type of ground station communication system.The most common satellites, tiny CubeSats, employ a standardized bus to reduce costs and labor. Satellites are made to be as light and durable as feasible due to the high expense of space launch.To learn more about satellites and angular momentum, visit: https://brainly.com/question/19579165
#SPJ4
Two vectors of the same magnitude are added; one pointing east, one west. the magnitude of the resultant vector is :_________
Answer:
The magnitude of the resultant vector, two vectors of the same magnitude are added; one pointing east, one west is Zero.
Explanation:
Vector resolution is the process of identifying the magnitude and direction of a vector's components visually or trigonometrically. The magnitudes of the aforementioned vector are due to the fact that the vector sum of all forces must still be zero.
A resultant force can be found by adding two forces together. A single force can be resolved (divided) into two component forces that are at right angles to one another.
A vector quantity with magnitude and direction can be used to represent a force. The pulling force may be resolved using vector diagrams into a horizontal component acting to the right and a vertical component acting upwards (or forces acting in opposite directions).
To learn more about resultant vector. Click https://brainly.com/question/14480157
#SPJ4
what is the geometric relationship between the force f and the cross-section area a under consideration?
The cross-sectional area A under consideration is parallel to the force F.
What do you mean by force?An influence that can alter an object's motion is referred to as a force in physics. An object with mass can change its velocity, or accelerate, in response to a force by moving away from rest, for example. Intuitively, pushing or pulling can be used to describe forces. As a vector quantity, a force is one that has both magnitude and direction. It is expressed as a newton in the SI system (N). F is a symbol that stands for force (formerly P). The net force exerted on an object is equal to the rate at which its momentum varies over time, according to Newton's second law in its original version.
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ4
a horizontal directed force of 252 n is needed to keep a 555-n box sliding on a level wooden floor at a constant speed. what is the coefficient of sliding friction μ?
The coefficient of sliding friction μ is 0.45
Frictional force
The frictional force is a force that prevents an object from sliding. The formula for calculating the frictional force is expressed asl
Ff = μR
where
μ is the required coefficient of friction
R is the normal reaction
Given the following parameters
Ff = 252N
R = 555N
substitute
μ = Ff//R
μ = 252/555
μ = 0.45
Hence the coefficient of sliding friction μ is 0.45
Learn more on friction here: https://brainly.com/question/24338873
#SPJ4
A boy heard the thunder 18.74998 seconds after the lightening of a storm which is at a distance 6km , so the speed of sound in air equals .....( Where the speed of light in air = 3000000)
I already checked the answer in the answer book it's velocity= 320 m/s but I don't understand how
If anyone can help me please do
If a boy heard the thunder 18.74998 seconds after the lightening of a storm which is at a distance 6km , so the speed of sound in air is 320m/s.
As we know that,
Speed = Distance / Time
Firstly we calculate the time taken by light to travel distance 6 Km.
Given,
Distance = 6Km
Speed = 3000000m/s
Time = D/ S
= 6000/ 3000000
= 0.002s
So, the time taken by light to reach the ground is 0.002s.
Now,
Time taken by sound to reach the ground = time taken by light + 18.749.
0.002 + 18.749
= 18.75
Now, t = 18.75
d = 6km
Speed = 6000/18.75
= 320m/s
Thus, we concluded that if boy heard the thunder 18.74998 seconds after the lightening of a storm which is at a distance 6km , so the speed of sound in air is 320m/s.
learn more about Speed:
https://brainly.com/question/13263542
#SPJ9
calculate charlie's displacement on his bicycle if he travels a constant velocity of 8km/h north for 30 minutes
a, 240 km north
b, 4 km north
c, 22 km north
d, 16 km north
e, 38 km north
pls help
Answer:
B 4km north
Explanation:
the g string on a guitar is a 0.42-mmmm-diameter steel string with a linear density of 1.1 g/mg/m . when the string is properly tuned to 196 hzhz, the wave speed on the string is 250 m/sm/s. tuning is done by turning the tuning screw, which slowly tightens-and stretches-the string.
So, by 1.86 mm, the G string on guitar string stretches, when it is first turned which then slowly tightens and stretches the string while the string is properly tuned to 196 hz, then the wave speed on this string is 250 m/s.
What is wave speed?The amount of space that a wave covers in a certain amount of time, such as the number of meters it covers in a second, is known as its wave speed.
Speed = Wavelength x Frequency is the exact equation that describes how this wave speed can be related to wavelength and wave frequency. When the wavelength and frequency are known, this equation can be used to determine the wave speed.
What is the wave speed equation?Wave speed is calculated using the equation wavelength/ time period. Since the S.I. unit for time is the second and the unit for wavelength is the meter (s). M/s is the S.I. unit for wave speed.
To know more about wave speed, visit:
https://brainly.com/question/28446485
#SPJ4
At the position of the stop-light 4 s after the light had turned green. what is the slowest constant speed which the green car can maintain and still catch up to the blue car? answer in units o
The green car must travel at least 3 m/s in order to catch up to the blue car.
The blue automobile might go slower if the green car is moving faster than it is at the point where the distance between them equals 0. Furthermore, the green automobile will never catch up to the blue car if the blue car moves faster than the green car before they collide.
The blue car's speed as a function of time is given by v(T) = 0.3T. The equation for the position of the green automobile can be rewritten as g(T) = (T-5) *0.3T given the justification for the ideal speed. Set the equations to be equal to one another since we want the distance between the green and blue automobiles to be the same. (T-5) *0.3T = 0.15*T^2 Then, calculate T (T-5) *0.3T = 0.15*T2, where 0.3T2 - 1.5T equals 0.15T2 and 1.5T - 0.15T2 = 0. Our quadratic equation now has the values A = 0.15, B = -1.5, and C = 0.
To determine the roots, which are -4.5 and 10, use the quadratic formula. The interception will happen at T=10 because the number of 10 implies that it will, hence the velocity must be v(T) = 0.3T v (10) = 0.3*10 = 3 m/s. The green car must travel at least 3 m/s in order to catch up to the blue car.
The complete question is- A blue car pulls away from a red stop-light just after it has turned green with a constant acceleration of 0.2 m/s². A green car arrives at the position of the stop-light 7.5 s after the light had turned green. What is the slowest constant speed which the green car can maintain and still catch up to the blue car? Answer in units of m/s.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
Identify the circuit for a light fixture controlled by four switches, where flipping one of the switches turns the light on when it is off and turns it off when it is on.
the circuit for a light fixture controlled by four switches, where flipping one of the switches turns the light on when it is off and turns it off when it is on is given as: ([tex]\overline {x}[/tex]yzw) + (x[tex]\overline {y}[/tex]zw) + (xy[tex]\overline {z}[/tex]w) + (xyz[tex]\overline {w}[/tex])
Here, overlined x , y , z and w represents the switch of the circuit(see the image)
So if one of the four switches is flipped the light turn on when it is off and turns it off when it is on.
What is a circuit?A circuit in electronics is a fully enclosed circle through which electricity travels. A load, conductors, and a current source make up a basic circuit. Any fixed path that electricity, data, or a signal can go through can be referred to as a circuit in a broad sense.
Electrons in an electronic circuit leave the power source, move along conductors, pass through a load to do work, and then return to the power source. The circular course that the electrons take through it gives it the name "circuit." Ohm's Law provides a description of the connection between electrical flow and load. In a circuit, electrons move from the negative to the positive side of the power supply.
Learn more about circuit
https://brainly.com/question/2969220
#SPJ4
A lithium atom combines with a helium atom to make a new larger atom this is an example of
Answer
Fission.
Explanation:
Fission occurs when a neutron slams into a larger atom, forcing it to excite and split into two smaller atoms, also known as fission products.
Hope this helps u ; )
a speeding bullet the fastest commercially available rifle bullet claims a muzzle velocity of 4225 ft/s .
Complete Question
The fastest commercially available rifle bullet claims a muzzle velocity of 4225 ft>s.
(a) what is this speed in miles per hour
The fastest rifle bullet reportedly has a muzzle velocity of 4225 feet per second. This speed is equivalent to 2880.68274 miles per hour in miles per hour.
Given Data:
1 foot = 0.000189394 miles4225 feet = 0.000189394 × 4225 milesNow allow us to locate the space covered by way of the bullet in one secondDistance included via a bullet in 1 second = 0.000189394 × 4225 milesDistance traveled by means of a bullet in 1/3600 hour = zero.000189394 × 4225 milesNow let us find the gap included by way of the bullet in a single hourDistance protected with the aid of a bullet in 1 hour = 0.000189394 × 4225 × 3600 milesthe velocity of the bullet is 2880.68274 miles/hour.Know more about bullet velocity:
https://brainly.com/question/21837392
#SPJ4
a person travels by car from one city to another. she drives for 27.6 min at 62.7 km/h, 9.6 min at 115 km/h, 46.1 min at 45.2 km/h, and spends 12.3 min along the way eating lunch and buying gas.
The total distance between the cities is 60.1 Km.
We have a person driving between cities.
We have to calculate the distance between the cities.
What is the formula to calculate Distance travelled ?The formula to calculate the distance travelled is -
D = speed x time = v x t
According to the question -
When she drives at 62.7 km/h, her distance travelled will be -
d(1) = 62.7 x (27.6 / 60) = 28.8 Km
When she drives at 115 km/h, her distance travelled will be -
d(2) = 115 x (9.6 / 60) = 18.4 Km
When she drives at 45.2 km/h, her distance travelled will be -
d(3) = 62.7 x (12.3 / 60) = 12.9 Km
The total distance between the cities -
D = d(1) + d(2) + d(3) = 28.8 + 18.4 + 12.9 = 60.1 Km
Hence, the total distance between the cities is 60.1 Km.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/16976641
#SPJ4
[ The given question is incomplete. You can access complete question down below -
" a person travels by car from one city to another. she drives for 27.6 min at 62.7 km/h, 9.6 min at 115 km/h, 46.1 min at 45.2 km/h, and spends 12.3 min along the way eating lunch and buying gas. Determine the distance between the cities along this route. ]
Enter your answer in the provided box.an empty vial weighs 63.28 g. if the vial weighs 436.33 g when filled with liquid mercury (d = 13.53 g/cm3), what volume of mercury is in the vial?
when filled with liquid mercury (density = 13.53 g/cm3) volume of mercury is in the vial is 88.41 cm3
Once you are aware of the mass of the mercury, you may calculate the volume of the vial by using the density of the mercury to determine its mass. You are aware that the vial including the mercury weighs 439.31 grams.
The vial weighs vial = 50.90 g.
This indicates that the mercury's mass will be 439.31 g - 50.90 g = 388.41 g.
You now understand that the density of mercury is 13.53 g/cm.
Density is the substance's mass per unit of volume. The symbol most often used for density is ρ although the Latin letter D can also be used.
To learn more about density:
https://brainly.com/question/15164682
#SPJ4
shot from a cannon in 1998, david "cannonball" smith set the distance record for being shot from a cannon (56.64 m). during a launch in the cannon’s barrel, his speed increased from zero to 80 km/h in 0.40 s. while he was being stopped by the catching net, his speed decreased from 80 km/h to zero with an average acceleration of 180 m/s2m/s2. what can you determine about smith’s flight using this information? homework
The final velocity of the cannon camera is 22m/s
This question informs us that David will depart on a voyage at his maximum speed. Consequently, the speed is 80 km/h. So we have to convert. At a 2 m/s rate, listen. We must multiply our number of 80 by the quantity of meters in a club in order to convert it to units. His final velocity therefore equals 22.2
a= v/ t = 56m/sec square dec acceleration = 80km/h converting into final velocity m /s sec its 22.2m/s
To learn more about velocity:
brainly.com/question/18084516
#SPJ4
when a man returns to his well-sealed house on a summer day, he finds that the house is at 35°c. he turns on the air conditioner, which cools the entire house to 20°c in 30 min. if the cop of the air-conditioning system is 2.8, determine the power drawn by the air conditioner. assume the entire mass within the house is equivalent to 80
Answer:
The power drawn by the air conditioner assuming the entire mass within the house is equivalent to 800 kg cv= 0.72 kJ/kgK and c_{p}cp = 1.0 kJ/kgK is 1.71 kW
Explanation:
The entire amount of heat that needs to be removed from the house is given by the expression:
QL = mCvT
m = mass = 800kg
dT = 35-20oC
QL = 800 * (0.72 Kj/Kb.oC) * 15
QL= 8640Kj
To calculate the average rate of heat removal from the house, we use
QL = Ql/dt
QL = 8640Kj/30*60
QL = 4.8 Kw
The total power input to the AC is calculated by;
Win = QL/COP
Substituting in the given value
Win = 4.8 Kw/2.8
Win = 1.71 Kw
To learn more about heat equivalent and removal. Click on https://brainly.com/question/14161102
#SPJ4
you walk 6 meters to the east. then turn around and walk 4 meters west. find the distance travelled and find the displacement
Answer:
ffghccvvghcgjvccvb
Explanation:
gmvfjbcgijcfub cjjcv
jhggjvchivvvhj
A soccer ball was kicked toward the goal. The horizontal component of velocity was 22 m/s and the vertical component was 12 m/s. What is the magnitude of the resultant velocity of the soccer ball?.
The magnitude of the resultant velocity of the soccer ball is: 25.059 m/s
The formula for projectile motion that we will use to solve this exercise is:
vf= √[v(x)² + v(y)²]
Where:
vf= final velocityv(x)= horizontal component of velocityv(y)= vertical component of velocityInformation about the problem:
v(x)= 22 m/sv(y)= 12 m/svf=?Applying the final velocity formula we have:
vf= √[v(x)² + v(y)²]
vf= √[(22 m/s)² + (12 m/s)²]
vf= √[484 m²/s² + 144 m²/s²]
vf= √[628 m²/s²]
vf= 25.059 m/s
What is projectile motion?The projectile motion is the motion whose trajectory describes a parabola having a horizontal and a vertical component of motion.
Learn more about projectile motion at: brainly.com/question/10680035
#SPJ4
In the metaphor of the bottle for theory of constraints, which part of the bottle represents the constraint?
In the metaphor of the bottle for theory of constraints, the part of the bottle represents the constraint is neck.
What is metaphor?A metaphor is a figure of the speech that describes an object or action in a way that isn’t literally true, but helps explain an idea or make a comparison.
Here are the basics:
A metaphor states that one thing is the another thing. It equates those two things not because they actually are the same, but for the sake of comparison or symbolism and if you take a metaphor literally, it will probably sound very strange (are there actually any sheep, black or otherwise, in your family?). Metaphors are used in the poetry, literature, and anytime someone wants to add some color to their language
The uses of metaphor, and the official definition:
A word or phrase for one thing that is used to refer to the another thing in order to show or suggest that they are similar
An object, activity, or idea that is used as a symbol of the something else
Metaphors are a form of the figurative language, which refers to words or expressions that mean something different from their literal definition. In the case of metaphors, literal interpretation would often be pretty silly.
To know more about phrase visit: https://brainly.com/question/24271343
#SPJ4
In the metaphor of the bottle for theory of constraints, the part of the bottle represents the constraint is neck.
What is metaphor?A metaphor is a figure of the speech that describes an object or action in a way that isn’t literally true, but helps explain an idea or make a comparison.
Here are the basics:
A metaphor states that one thing is the another thing. It equates those two things not because they actually are the same, but for the sake of comparison or symbolism and if you take a metaphor literally, it will probably sound very strange (are there actually any sheep, black or otherwise, in your family?). Metaphors are used in the poetry, literature, and anytime someone wants to add some color to their language
The uses of metaphor, and the official definition:
A word or phrase for one thing that is used to refer to the another thing in order to show or suggest that they are similar.
An object, activity, or idea that is used as a symbol of the something else
Metaphors are a form of the figurative language, which refers to words or expressions that mean something different from their literal definition. In the case of metaphors, literal interpretation would often be pretty silly.
To know more about phrase visit: brainly.com/question/24271343
#SPJ4
calculate the de broglie wavelength of a subatomic particle that is moving at 351 km/s, if its mass is 9.11 x 10–31 kg. λ
De Broglie wavelength of the subatomic particle is 0. 0020 * (10 )^ -3 nm.
What do you mean by a subatomic particle?Any of the multiple self-contained units of matter or energy that are the building blocks of all matter are considered subatomic particles, also known as elementary particles. They include the heavier constituents of the small but extremely dense atom's nucleus, the positively charged protons and the electrically neutral neutrons, as well as the electrons, the negatively charged, nearly massless particles that nonetheless make up the majority of the atom's size. The only known subatomic particles, however, are not these fundamental atomic building blocks. The electron is just one member of a class of fundamental particles that also includes the muon and the neutrino. Protons and neutrons, for example, are composed of quarks.
Let the De Broglie wavelength be Λ.
Λ = h/p
= (6.626 * 10^-34) / (351 * 9.11 * 10^-31)
Λ = 0.0020 * 10^-3 nm
To know more about subatomic particle, visit:
https://brainly.com/question/13303285
#SPJ4
A constriction in a pipe reduces its diameter from 4.0 cm to 2.0 cm. where the pipe is narrow the water speed is 8.0 m/s. where it is wide the water speed is:_______
a. 2.0 m/s
b. 4.0 m/s
c. 8.0 m/s
d. 16 m/s
e. 32 m/s
Option a) 2.0m/s
So, where it is wide, speed is 2 m/s
CalculationAccording to equation of continuity
A1V1 =A2V2
A1= [tex]\pi[/tex][tex](2*10^{-2}) ^{2}[/tex]
A2 = [tex]\pi (1*10^{-2}) ^{2}[/tex]
V2 = 8m/s
solving by the equation, we have
v1 = 2 m/s
Equation of continuityAn equation that describes the movement of a certain amount is known as a continuity equation or transport equation. It can be generalized to apply to any substantial quantity, but it is especially straightforward and effective when applied to conserved quantities.
Since mass, energy, momentum, electric charge, and other natural quantities all remain constant under the proper circumstances, continuity equations can be used to explain a wide range of physical events.
To know more about the equation of continuity visit:
https://brainly.com/question/15635105
#SPJ4
for the same percentage error in each of the three quantities, mass, diameter, and length, which would contribute the most to the error in the density
For the same percentage error in each of the three quantities, mass, diameter, and length, mass would contribute the most to the error in the density.
A substance's density is defined as its mass per unit of volume. Density is most frequently represented by the symbol, however Latin letter D may also be used. The formula for density is mass divided by volume:
ρ = m / v
The error's absolute value is multiplied by 100%, divided by the accepted value, and then converted to a percent.
Since, the mass is directly related to density so the mass would contribute more to the error in density out of the three quantities, mass, diameter, and length.
Learn more about density here;
https://brainly.com/question/15164682
#SPJ4