HELP!!!!!!!! For #19-20, solve for x. simplify all radicals.

The initial amount injected was 50 milligrams and  after 7 hours, there are approximately 16.08 milligrams of the drug in the patient's bloodstream.

The function that models the number of milligrams D(h) in a patient's bloodstream h hours after the drug is injected is:

D(h) = 50e^(-0.2h)

To find the initial amount injected, we can evaluate D(0):

D(0) = 50e^(-0.2*0) = 50e^0 = 50

Therefore, the initial amount injected was 50 milligrams.

To find the amount in the bloodstream after 7 hours, we can evaluate D(7):

D(7) = 50e^(-0.2*7) ≈ 16.08

Therefore, after 7 hours, there are approximately 16.08 milligrams of the drug in the patient's bloodstream.

Learn more about models at https://brainly.com/question/27271326

#SPJ1

In the given pairs of intersecting parallel lines, the measure of ∠MPQ=125°.

Parallel lines are coplanar infinite straight lines in geometry that never cross. In the same three-dimensional geometry, parallel planes are any planes that never cross. Curves with a fixed minimal distance between them and no contact or intersection are said to be parallel.

The angles created when a diagonal intersects two parallel lines are known as corresponding angles. According to the definition of corresponding angles, when two parallel lines cross a third one, the angles that are in the same relative location at each intersection are referred to as being corresponding angles to one another.

In this figure, ∠LMN=∠MPQ since they are corresponding angles

5x=3x+50

on solving, we get

x=25

Therefore, ∠MPQ= 125°

To know more about parallel lines, visit

https://brainly.com/question/16701300

#SPJ1

The perimeter of the smaller polygon is 20 yards.

Two polygons are similar.

The perimeter of the larger polygon is 120 yards and the ratio of the corresponding side lengths is 1/6.

Find the perimeter of the other polygon.

In similar polygons, the ratio of the corresponding side lengths is equal to the ratio of their perimeters.

Since the larger polygon has a perimeter of 120 yards and the ratio of the corresponding side lengths is 1/6,

the smaller polygon must have a perimeter that is 1/6 of the larger polygon's perimeter.

That is, Perimeter of smaller polygon =  [tex]\frac {1}{6}[/tex]

The perimeter of larger polygon= [tex]\frac{1}{6} \times120\][/tex]

Multiplying 1/6 by 120 yields

[tex]\frac{120}{6}[/tex] =20

So the perimeter of the smaller polygon is 20 yards.

For similar question on perimeter.

https://brainly.com/question/19819849

#SPJ11

As per the given average, the solution of the breakeven w/ hidden costs is 62% higher.

Let's assume that the costs associated with running a 315-ticket run are $7,592. This means that on average, each ticket needs to sell for $24.10 (($7,592/315) = $24.10) to break even.

Similarly, if we consider the other two runs, we can calculate the average number of tickets needed to break even per show as follows:

For the 323-ticket run, the average number of tickets needed to break even per show is 65. (($7,784/323) = $24.10)

For the 331-ticket run, the average number of tickets needed to break even per show is 56. (($7,977/331) = $24.10)

Furthermore, we can calculate the break-even occupancy percentage for each run, which is the percentage of tickets that need to be sold to break even. The break-even occupancy for each run is as follows:

For the 331-ticket run,

=> 56/331 = 0.17 or 17%,

=> 1-0.17 = 0.83 or 83%,

=> 0.83/0.17 = 4.88,

=> 4.88 x 100% = 488%,

=> 488% x 0.62 = 303%,

=> 303%/4.88 = 62%

Hence the break-even occupancy is 62%.

To know more about average here

https://brainly.com/question/16956746

#SPJ4

Extending to Three Dimensions depend on the specific questions asked and can be calculated using the formula for the volume of a three-dimensional object.

The answers to Edmentum's Unit 3 Post Test: Extending to Three Dimensions depend on the specific questions asked. Generally, the test covers topics such as the definition of three-dimensional objects, the properties of three-dimensional space, and the relationships between three-dimensional figures. For example, a question might ask how to calculate the volume of a rectangular prism. To answer this, one would need to calculate the area of each of the rectangles that make up the prism and then multiply them together to get the volume. For example, if the length of the prism is 4, the width is 3, and the height is 2, the volume of the prism would be 24 (4 * 3 * 2 = 24).

Learn more about Dimensions here:

https://brainly.com/question/31209488

#SPJ1

Answer: 1.5

Step-by-step explanation:

The interquartile range (IQR) is a measure of statistical dispersion and is calculated by subtracting the first quartile (Q1) from the third quartile (Q3). For the given dot plot data of the toddler's heights, the data would first be arranged in ascending order, then divided into two halves below and above the median to determine the first and third quartiles.

To find the interquartile range (IQR) in the dot plot data of the toddler's heights at Mrs. Orlando's daycare, we first need to understand what the IQR represents. The Interquartile Range is a measure of where the bulk of the values lie in a data set. It's computed by subtracting the first quartile (Q1) from the third quartile (Q3).

As a first step, you would arrange the data points in ascending order. The median would give us the second quartile (Q2). The data set is then divided into two halves, below and above the median. The first quartile (Q1) is the median of the lower half and the third quartile (Q3) is the median of the upper half. Finally, subtract Q1 from Q3 to find the IQR.

https://brainly.com/question/37229455

#SPJ2

The standard error of the mean represents a sample, while the standard deviation represents a population. The correct option is (c) sample; population

The standard error of the mean is a measure of the variability of sample means from multiple samples, while the standard deviation is a measure of the variability of individual data points from the mean of a single sample or population.

The standard error of the mean helps us estimate the accuracy of the sample mean as an estimate of the true population mean, while the standard deviation gives us an idea of how much the data points deviate from the mean. In statistics, it is important to distinguish between these two measures to properly interpret data and draw meaningful conclusions.

Therefore, the correct option is (c) sample; population

Learn more about standard error here

brainly.com/question/14524236

#SPJ4

The given question is incomplete, the complete question is:

The standard error of the mean represents a ___, while the standard deviation represents a _______.

a. law of large numbers; central limit theorem

b. population; sample

c. sample; population

d. central limit theorem; law of large numbers

In the following question, among the conditions given, the option- a,b and c stand the same ie- The level of measurement is a ratio. The statistic used for the central tendency is the mean or median, whereas d. birth, "is ordinal."

1. Body weight in pounds: The level of measurement is a ratio. The statistic used for the central tendency is mean or median, while for variability, standard deviation or variance can be used.

2. Number of cigarettes smoked in a day: The level of measurement is a ratio. The statistic used for the central tendency is mean or median, while for variability, standard deviation or variance can be used.

3. Ethnicity: The level of measurement is nominal. The statistic used for the central tendency is the mode, while for variability, there is no appropriate statistic.

4. Birth order: The level of measurement is ordinal. The statistic used for the central tendency is median or mode, while for variability, range or interquartile range can be used.

For more such questions on mean and mode

https://brainly.com/question/452652

#SPJ11

Conclusion
Therefore, for some natural number N, n ≥ N and n ∈ N implies |(p - q)/n| < ε.

To show that for some natural number N, n ≥ N and n ∈ N implies |p/n - q/n| < ε, we'll use the Archimedean property of real numbers. The Archimedean property states that for any positive real numbers a and b, there exists a natural number n such that n*a > b.

Let's consider the inequality we want to prove: [tex]|p/n - q/n| < ε.[/tex]

Step 1: Rewrite the inequality
First, we can rewrite the inequality as |(p - q)/n| < ε, since we are allowed to combine the fractions.

Step 2: Apply the Archimedean property
By the Archimedean property, we know that for any ε > 0, there exists a natural number N such that N > (p - q)/ε.

Step 3: Rearrange the inequality
We can rearrange the inequality from step 2 to get[tex] N*ε > p - q. [/tex]

Step 4: Divide by N
Now, divide both sides of the inequality by N to get [tex]ε > (p - q)/N.[/tex]

Step 5: Relate this to our original inequality
We want to show that |(p - q)/n| < ε for some n ∈ N, where n ≥ N. Since n ≥ N, and ε > (p - q)/N, we have ε > (p - q)/n for n ∈ N and n ≥ N

for such more questions on natural numbers

https://brainly.com/question/2228445

#SPJ11

Answer:

Step-by-step explanation:

144/25=x/5

times both sides by 5

144/5=x

simplify

x=144/5 or 28.8

Answer: x= 144/5

Step-by-step explanation:

Cross-Multiply

144/25 = 25x

Swap the sides so you can solve

720 =25x

Divide both sides

25x=720

x=144/5

Answer:

Mira's monthly income: Rs. 55,000

Allowance: Rs. 3,000

Total monthly income before festival expenses: Rs. 58,000

Festival expenses (equivalent to monthly basic salary): Rs. 55,000

Total monthly income including festival expenses: Rs. 113,000

Amount deducted for provident fund (10% of monthly income excluding allowance and festival expenses):

10% of (Rs. 55,000) = Rs. 5,500

Total monthly deduction for provident fund: Rs. 5,500

Taxable income:

Total monthly income including festival expenses - Total monthly deduction for provident fund = Rs. 107,500

To calculate the annual tax to be paid by Mira, we need to know the income tax rates and tax slabs applicable for the current financial year. Without this information, we cannot provide an accurate answer

Answer:

8%

Step-by-step explanation:

[tex]= .08[/tex]

This is the answer as a decimal. To change a decimal to a perfect multiply the decimal by 100%

[tex].08 \times 100\% = 8\%[/tex]

The family-sized box requires 130 more square inches of cardboard than the regular-sized box, has an additional 228 cubic inches of cereal capacity, and costs less per cubic inch of cereal.

To calculate the additional square inches of cardboard needed for the family-sized box, we need to find the difference in surface area between the regular-sized box and the family-sized box.

The regular-sized box has a surface area of 2 x 6 + 2 x 11 + 6 x 11 = 104 square inches.

The family-sized box has a surface area of 2 x 8 + 2 x 15 + 3 x 15 + 3 x 8 + 3 x 15 = 234 square inches.

Therefore, the additional square inches of cardboard needed for the family-sized box is 234 - 104 = 130 square inches.

B. To find how many more cubic inches of cereal fit in the family-sized box than the regular-sized box, we need to calculate the difference in volume between the two boxes.

The regular-sized box has a volume of 2 x 6 x 11 = 132 cubic inches.

The family-sized box has a volume of 3 x 8 x 15 = 360 cubic inches.

Therefore, the additional cubic inches of cereal that fit in the family-sized box is 360 - 132 = 228 cubic inches.

C. To determine which cereal costs less per cubic inch of cereal, we need to divide the cost of each box by its respective volume.

The regular-sized box costs $3.99 for 132 cubic inches of cereal, which gives us a cost of $0.03 per cubic inch.

The family-sized box costs $5.69 for 360 cubic inches of cereal, which gives us a cost of $0.02 per cubic inch.

Therefore, the family-sized box costs less per cubic inch of cereal.

To know more about square inches visit:

https://brainly.com/question/6754997

#SPJ1

The exponential function that relates the total population, is [tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex] and the rate at which the population is increasing in the year 2019 is 69114.53.

The exponential function in mathematics is represented by the symbol eˣ (where the argument x is written as an exponent). The word, unless specifically stated differently, normally refers to the positive-valued function of a real variable, however it can be extended to the complex numbers or adapted to other mathematical objects like matrices or Lie algebras.

we know that ,

the population of any city can be modeled in the form of exponential function as follows:

[tex]P(t)=P(0)(1+R)^t[/tex]    

where, P(t)=population of the town at any given time t

P(0)=population of the town initially (in the year 2000 for this problem)=540,000

R=rate of increase (=5.1% in the given problem)

substituting the values in eqn(1), we get

[tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex]

as we know that

[tex]\because \frac{d}{dx}(a^x )=a^xln(a)[/tex]

so differentiating w.r.t. we get,

[tex]P'(t)=540,000\left [ 1+(5.1/100) \right ]^t*ln(1+(5.1/100) )\\\\P'(t)=540,000\left [ (105.1/100) \right ]^t*ln(105.1/100)\\\\P'(t)=540,000\left [ (1.051) \right ]^t*ln(1.051)[/tex]

so, the rate at which population is increasing in the year 2019 =

[tex]P'(19)=540,000(1.051)^{19}*ln(1.051)[/tex]

P'(19)= 69114.53.

Learn more about Exponential function:

https://brainly.com/question/29235027

#SPJ4

Complete question:

The population of Toledo, Ohio, in the year 2000 was approximately 540,000. Assume the population is increasing at a rate of 5.1 % per year.

a. Write the exponential function that relates the total population, P(t), as a function of t, the number of years since 2000. P(t) = =

b. Use part a. to determine the rate at which the population is increasing in t years. Use exact expressions. P'(t) people per year

c. Use part b. to determine the rate at which the population is increasing in the year 2019. Round to the nearest person per year. P'(19) = people per year

One possible set of values could be:

29, 30, 31, 52, 53, 54

Given:

Range = 22

Median = 40

Mode = 52

Number of values in the data set = 6

Since the median is 40, it indicates that two values in the data set are below 40, and three values are above 40.

The mode is given as 52, which means that at least one value in the data set is equal to 52.

There are six values in the data set, we can construct a possible set of values:

Min Value + 2 values below median + Mode + 3 values above median + Max Value = 6 values

Let's try one possible combination:

Min Value = 40 - 11 = 29

Max Value = Min Value + Range = 29 + 22 = 51

One possible set of values could be:

29, 30, 31, 52, 53, 54

Here, the range is 51 - 29 = 22, the median is 52, and the mode is also 52.

Learn more about the median of data here:

brainly.com/question/28060453

#SPJ12

This may be wrong

Answer: 240.25 square units

Step-by-step explanation:

You could take the perimeter already given, and turn this into a rectangle.

Since the left side is blank, this means you add 7 to thirteen to get the measurement of it. It would take a while to explain, and it seems like you want the answer soon.

You end up with a perimeter of 62.

If you get 2 sets of 2 values from this perimeter, you can create a width and height for your "rectangle"

You could turn this into a square even. Divide the perimeter by 4 to get a length of each side.

Each side of your rectangle (now square) is equal to 15.5 units.

Since the formula for area for a rectangle is width times height, multiply 15.5 by itself, and you get an area measure of 240.25 square units.

Among the following, "They have the same unusual features" is not a correct comparison among the Z-distribution and all the t-distributions. Option B is the correct answer.

A z-distribution refers to the normal distribution of a standard set of values for a variable. If a variable has a normal distribution with a mean of 0 and a standard deviation of 1, it is said to follow a standard normal distribution, which is also known as a z-distribution.

A t-distribution is a type of probability distribution that is used in statistical analysis when the sample size is small or the population's standard deviation is unknown. T-distributions are used in a variety of statistical tests, including the t-test and the analysis of variance (ANOVA). T-distributions are a family of distributions that resemble the normal distribution, with the tails stretched to either side, based on the number of degrees of freedom.

In general, the t-distribution is less peaked and has heavier tails than the normal distribution. As the degrees of freedom increase, the t-distribution approaches the normal distribution. Thus, Option B "They have the same unusual features" is not a correct comparison among the Z-distribution and all the t-distributions.

You can learn more about  t-distributions at

https://brainly.com/question/17469144

#SPJ11

None of these statements must be true

=========================================

Explanation:

Let's go through the answer choices one at a time.

----------------

A)

Consider the set {4,5,6}. It has a mean of (4+5+6)/3 = 15/3 = 5. We add up the values and then divide by the number of values (3 in this case).

Now consider the set {3,5,7}. I've added 1 to the largest element and subtracted 1 from the smallest. This will spread the data set out further. The mean is still 5 because (3+5+7)/3 = 15/3 = 5. The center hasn't changed. But the data is more spread out so the variance is larger for this new set.

Therefore, the sets {4,5,6} and {3,5,7} do NOT have the same variance. We cross choice A off the list.

----------------

B)

Recall that

[tex]\text{standard deviation} = \sqrt{\text{variance}[/tex]

For example, if the variance is 36 then the standard deviation would be [tex]\sqrt{36} = 6[/tex]

Because of the connection of the standard deviation and variance, both measure how spread out a set is. Furthermore, it means the sets {4,5,6} and {3,5,7} do NOT have the same standard deviation. We can cross choice B off the list.

----------------

C)

This statement is clearly not true because the sets {4,5,6} and {3,5,7} are not the same, but they produce the same mean. We can cross choice C off the list.

Choice D is the only thing left so it must be the final answer.

Option (C) yields the perimeter of the supplied figure, which is 45 feet.

In geometry, the perimeter is the overall length of a shape's boundary.

The perimeter of a shape is determined by adding the lengths of all of its edges and sides.

Linear measurements like centimeters, meters, inches, and feet are used to express their dimensions.

So, two circles and one square make up the figure.

A square's perimeter is equal to 4. (side)

The square's side length is 5 feet.

Put the value in the equation as a replacement -

Perimeter of square = 4(5)

Perimeter of square = 20 feet

The circle's radius is equal to 2.5 feet.

A circle's perimeter is equal to 2r.

Put the value in the equation as a replacement -

Perimeter of circle = 2π(2.5)

Perimeter of circle = 5π

Due to the two circles, the circumference is 2 + 5 = 10 ft.

The figure's border measures -

The total perimeter equals the sum of the square and circle perimeters.

Total perimeter = 2.5 + 10π

Total perimeter = 2.5 + 10(3.14)

Total perimeter = 12.5 + 31.4

Total perimeter = 43.9 feet ≈ 45feet

Therefore, option (C) yields the perimeter of the supplied figure, which is 45 feet.

Know more about the perimeter here:

https://brainly.com/question/19819849

#SPJ1

Correct question:

Which is the best estimate of the perimeter of the figure? Use 3.14 for pie.

To convert kilometers per liter to miles per gallon, we need to use conversion factors. There are approximately 3.785 liters in a gallon, and there are approximately 1.609 kilometers in a mile.

So, first we convert the fuel efficiency of the hybrid vehicle from kilometers per liter to kilometers per gallon:

1 km/liter * 3.785 liters/gallon = 3.785 km/gallon

Then, we convert kilometers per gallon to miles per gallon:

3.785 km/gallon * 1 mile/1.609 km = 2.35 miles/gallon

Therefore, the gas mileage of the hybrid vehicle is approximately 2.35 miles per gallon.

It's worth noting that the mileage rating of a hybrid vehicle can vary depending on factors such as driving conditions and habits, so the actual gas mileage may differ from the stated rating. Additionally, the conversion factors used here are approximate, so the exact gas mileage may vary slightly depending on the specific conversion factors used.

For more details about conversion click here:

https://brainly.com/question/3477680#
#SPJ11

The Existence and Uniqueness Theorem states that if a system of linear equations has a unique solution, then the solution can be found by solving the associated augmented matrix.

To determine whether a system of linear equations has a unique solution, the number of equations must equal the number of unknowns. Additionally, the equations must not be linearly dependent. If these criteria are met, then the Existence and Uniqueness Theorem guarantees that there is exactly one unique solution.

To illustrate, consider the system of equations:

x1 + x2 - x3 = 2  

2x1 - x2 + 2x3 = 8

3x1 + 2x2 - 4x3 = 0

= 4. Therefore, the Existence and Uniqueness Theorem guarantees that there is exactly one unique solution for this system.

See more about  existence and uniqueness at: https://brainly.com/question/30153142

#SPJ11

There is a 55.75% probability that at least 9 but fewer than 12 trucks pass the inspection out of a group of 17 trucks undergoing a brake inspection at the inspection facility with a pass rate of 65%.

We can utilize the binomial distribution formula to resolve this issue. Out of a group of 17 trucks, let X represent the proportion of trucks that pass the inspection, and let p represent the probability of passing the test, which is 0.65. A binomial distribution with n = 17 and p = 0.65 is then followed by X.

Calculating the cumulative chance of receiving 9, 10, or 11 trucks passing the inspection can help us determine the likelihood that at least 9 but fewer than 12 trucks will pass the test. The binomial distribution formula can be used for this as follows:

P(X=9, X=10, X=11) = P(X=9, X=10, X=11)

Using the binomial distribution formula, we can get the probabilities for each of the following:

[tex]P(X=9) = (17 pick 9) (17 choose 9) * 0.65^9 * 0.35^8[/tex] = [tex]0.1837 \sP(X=10)[/tex] = [tex](17 select 10) (17 choose 10) P(X=11)[/tex] = [tex](17 select 11) * 0.65*10 * 0.35*7[/tex] = [tex]0.2197 * 0.65*11 * 0.35*6 = 0.1541[/tex]

In light of this, the likelihood that at least 9 but not all 12 vehicles pass the inspection is:

P(9 ≤ X < 12) = 0.1837 + 0.2197 + 0.1541 = 0.5575

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ4

The description of the transformations of the parent functions to produce the graphs of f(x) = sin(2x) and g(x) = csc(2x) are

a. The graphs of f(x) = sin(2x) and g(x) = csc(2x) are a horizontal compression by a factor of (1/2) of the graphs of y = sin(x) and y = csc(x).

b. 0, π/2, π, 3·π/2

c. 0, π/2, π, 3·π/2

A transformation of a function is an operation that changes the function's graph in some way.

a. The graph of f(x) = sin(2x) is obtained by taking the graph of sin(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the sine function has been multiplied by 2, which causes the period of the function to be halved.

The graph of g(x) = csc(2x) is obtained by taking the graph of y = csc(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the cosecant function has been multiplied by 2, which causes the period of the function to be halved.

b. The x-intercepts of the graph of f(x) = sin(2x) are the values of x for which f(x) = 0. Since sin(2x) = 0 when 2x is an integer multiple of π, we can find the x-intercepts by solving the equation 2x = n·π for x, where n is an integer. This gives us x = n·π/2. o four x-intercepts of the graph of f are x = 0, x = π/2, x = π, and x = 3·π/2.

c. The vertical asymptotes of the graph of the function g(x) = csc(2x) are the values of x for which g(x) is undefined. Since csc(2x) is undefined when 2x is an integer multiple of π, we can find the vertical asymptotes by solving the equation 2x = n·π for x, where n is an integer. This gives us x = (n·π)/2. So, four vertical asymptotes of the graph of g are x = π/2, x = 3·π/2, x = 5·π/2 and x = 7·π/2.

Learn more on the transformation of a function here: https://brainly.com/question/30968712

#SPJ1

A Zygote is/are formed immediately after the union of sperm and ovum in the fallopian tube.

A zygote is a cell formed when two gamete cells are fused by means of sexual reproduction. These cells contain a single set of chromosomes from both the father and the mother of the offspring. As a result, the zygote contains all of the genetic information required to create a completely new person. After the fertilization of the ovum by the sperm, the zygote is formed. The zygote will continue to divide into a multicellular embryo and eventually a fetus after fertilization has taken place.

The fusion of a sperm cell with an ovum in the fallopian tube leads to the formation of a zygote, which involves the combination of genetic material from both parents resulting in the creation of a single-celled zygote. This zygote then initiates the process of cell division and progresses into an embryo.

To know more about the "zygote": https://brainly.com/question/1151355

#SPJ11

Surface area

2 triangles: Just do bh instead of 1/2bh, bh = 8 * 3 = 24

2 rectangles: 2bh but we first need to find h. The altitude pictured by dotted line, creates a right triangle where its hypotenuse is h. Since it also has side lengths 3 and 4, h = 5 (by pythag triplets). Then, 2bh = 2 * 12 * 5 = 120

base: bh = 12 * 8 = 96

Adding these areas we have 24 + 120 + 96 = 240

Volume: Bh (big b signifies area of the base)

B = area of the triangle = 1/2bh = 1/2 * 8 * 3 = 12

So Bh = 12 *12 = 144

Hope this helps you understand the process.

Answer:

0.0593, or 5.93%

Step-by-step explanation:

There are a total of 8 x 8 = 64 one-foot tiles in the foyer. Since two of them are cracked, there are 62 tiles that are not cracked.

To find the probability that the two cracked tiles share a common edge, we need to first determine the total number of pairs of adjacent tiles in the 62 remaining tiles. Each tile has four adjacent tiles (unless it is a tile on the edge of the foyer), so the total number of pairs of adjacent tiles is:

4 x (62 - 14) + 3 x 8 = 220

We subtracted 14 from 62 because there are 14 tiles on the edges of the foyer that only have three adjacent tiles, and we added 3 x 8 to account for the eight corner tiles that only have two adjacent tiles.

Next, we need to determine the number of ways that the two cracked tiles can be placed such that they share a common edge. There are 60 possible locations for the first cracked tile, and once it is placed, there are only 3 possible locations for the second cracked tile (it can only be placed in one of the three tiles adjacent to the first cracked tile). Therefore, the total number of ways that the two cracked tiles can be placed next to each other is:

60 x 3 = 180

Finally, we can calculate the probability by dividing the number of favorable outcomes (i.e., the number of ways that the cracked tiles can be placed next to each other) by the total number of possible outcomes (i.e., the total number of ways that the two cracked tiles can be placed):

P = 180/ (62 choose 2) = 180/ (62 x 61/2) = 0.0593 (approximately)

Therefore, the probability that the two cracked tiles share a common edge is approximately 0.0593, or 5.93%.

Answer:

y- intercept = 18

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = - 3x + 8 ← is in slope- intercept form

with slope m = - 3

• Parallel lines have equal slopes , then

y = - 3x + c ← is the partial equation

to find c substitute (5, 3 ) into the partial equation

3 = - 3(5) + c = - 15 + c ( add 15 to both sides )

18 = c

y = - 3x + 18 ← equation of parallel line

with y- intercept c = 18

Answer:

Step-by-step explanation: