There are 567.8 mmHg in 75.7 kpa.
How to convert mmHg to kPa?Pressure is the amount of force that is applied over a given area divided by the size of this area.
The units of pressure are as follows:
Pascals (Pa)millimetres mercury (mmHg)Newton metreIn SI units, pressure is measured in pascals where;
one pascal equals one newton per square metreAtmospheric pressure is close to 100,000 pascals1 kPa = 760/101.325 = 7.5 mmHg
Hence, 75.7kpa is equal to 567.8 mmHg
Learn more about pressure at: https://brainly.com/question/17467912
#SPJ1
A hand of bananas is a small bunch made up of 5 bananas ( each banana is called a finger). If a large bunch of bananas is made up of 10 hands, how many bananas does it contain?
There are 50 bananas total in the enormous bunch of bananas.
How many bananas are there in a bunch?There are 10 bunches of bananas, and each bunch has 5 bananas; therefore, there are 50 bananas in all.The difference between a hand and a bunch of bananas. A finger is a single banana. A hand is made up of five to six fingers.A group of hands are all on one stem.Each bunch of bananas that a banana tree produces will eventually perish and need to be removed. Within a year, a fresh shoot will emerge from the rhizome to create a fresh bunch.Visit for more information on a bunch of bananas.
https://brainly.com/question/28015501
#SPJ1
calculate the number of vacancies per m^3 for gold at 900 c. the energy for vacancy formation is 0.86 ev/atom
At 900°C, the number of vacancies per m^3 for gold is 1.32 x 10^17 vacancies per m^3.
The number of vacancies per m^3 for gold at 900°C, the energy for vacancy formation (0.86 eV/atom) must be known.
Vacancies are atoms that are missing from the crystal lattice, so we must use the energy of vacancy formation to calculate how many vacancies can exist at a given temperature.
At 900°C, the energy of vacancy formation is 0.86 eV/atom. This energy is equal to 8.6 x 10^-19 Joules. The number of vacancies per m^3,
Number of vacancies = (Energy of vacancy formation / Boltzmann's Constant x Temperature) / Atom's Volume
Number of vacancies = (8.6 x 10^-19 / 1.38 x 10^-23 x 900) / 4.20 x 10^-29
Number of vacancies = 1.32 x 10^17 vacancies per m^3
Therefore, at 900°C, the number of vacancies per m^3 for gold is 1.32 x 10^17 vacancies per m^3.
It's important to note that this number is temperature dependent; if the temperature of the gold is increased or decreased, the number of vacancies per m^3 will also change.
As temperature increases, the number of vacancies per m^3 will increase and vice versa.
to know more about vacancies refer here:
https://brainly.com/question/12598037#
#SPJ11
predict which of the following 0.1m solutions would have the lowest freezing point: mg(cl)2, catechin, or sucrose. explain your reasoning.
The freezing point of a 0.1m solution is determined by its solute concentration, and the type of solute affects the freezing point and it will be Catechin.
The lowest freezing point will be found in the solution with the lowest solute concentration.
In this case, catechin has the lowest solute concentration of 0.001 mol/L, so it will have the lowest freezing point.
The freezing point of a solution is also affected by the type of solute present.
Magnesium chloride (MgCl2) and sucrose both have high molecular weights, and therefore will decrease the freezing point more than catechin. Therefore, catechin will still have the lowest freezing point.
The freezing point of a solution can also be affected by the presence of electrolytes.
Magnesium chloride is an electrolyte, which means it will dissociate in water and lower the freezing point more than catechin or sucrose. Therefore, catechin still has the lowest freezing point.
In summary, catechin has the lowest freezing point of the three solutions (MgCl2, catechin, and sucrose) because it has the lowest solute concentration and does not contain any electrolytes.
To know more about Catechin, refer here:
https://brainly.com/question/29996352#
#SPJ11
which of the following should have the greatest molar entropy at 298k? group of answer choices h2o(l) nacl(aq) ch4 (g) nacl(s)
The species that should have the highest molar entropy at 298 K is CH4(g). The correct option is CH4.
Entropy is a measure of the amount of disorder or randomness in a system. In other words, it is a measure of the number of ways a system can be arranged while maintaining its energy state. It is represented by the symbol S.
The entropy of a pure crystalline substance is zero at absolute zero temperature because it has a well-defined, ordered, and rigid structure.
As temperature increases, the entropy of the substance increases because the molecules of the substance move more randomly and are distributed over a larger volume.
Entropy is highest for gases, followed by liquids and then solids. Molar entropy is a measure of the entropy of a substance per mole of the substance.
Molar entropy (S) is given by the equation:
S = ΔS/n
Where ΔS is the change in entropy and n is the number of moles of substance. At standard temperature and pressure, the molar entropy of a substance is represented by Sº.
The entropy of the given species at 298 K is as follows:
H2O(l)Sº = 69.9 J/mol KNaCl(aq)Sº = 72.1 J/mol KCH4(g)Sº = 186.3 J/mol KNaCl(s)Sº = 72.1 J/mol KThus, the species that should have the highest molar entropy at 298 K is CH4(g).
to know more about entropy refer here:
https://brainly.com/question/20166134#
#SPJ11
the ammonium ion has the formula nh4 . how many nonbonding electrons must be shown in the lewis structure of the ammonium ion?
Answer:
Explanation:
NH₄
N: 1 x 5 valence electrons = 5 valence electrons
H: 4 x 1 valence electrons = 4 valence electrons
Total valence electrons to account = 9
Subtract 1 electron from the total since NH₄⁺ has a plus one charge.
9 - 1 = 8 electrons
There are no nonbonding electrons in the structure.
H
|
H -- N -- H
|
H
When adding the measurements 42. 1014 g + 190. 5 g, the answer has Significant figures
When adding the measurements 42. 1014 g + 190. 5 g, we get 7 significant figures. Those 7 significant figures are 2, 3, 2, 6, 0, 1 and 4.
Significant figures can be defined as the number of digits in a value which is often a measurement which contribute to the degree of accuracy of the value. We can start counting all the significant figures by starting the first non-zero digit. Significant figures of a number in positional notation are defined as digits in the number that are reliable and necessary to indicate the quantity of something. All zeros that occur between any two non zero digits are significant figures. Significant figures are known as the digits of a number which are meaningful in the terms of accuracy or in the term of precision. That involves any non-zero digits. When we are adding the measurements 42. 1014 g + 190. 5 g, the predicted 7 significant figures as it appears between the two non zero digits.
To learn more about Significant figures
https://brainly.com/question/24630099
#SPJ4
The complete question is,
When adding the measurements 42. 1014 g + 190. 5 g, the answer has ----------Significant figures.
Calculate the molar mass for SnCL4
Answer:
To calculate the molar mass of SnCl4, we need to add the atomic masses of one tin (Sn) atom and four chlorine (Cl) atoms, each multiplied by their respective coefficients in the formula.
The atomic mass of Sn is 118.71 g/mol, and the atomic mass of Cl is 35.45 g/mol.
Therefore, the molar mass of SnCl4 can be calculated as follows:
Molar mass of SnCl4 = (1 × atomic mass of Sn) + (4 × atomic mass of Cl)
= (1 × 118.71 g/mol) + (4 × 35.45 g/mol)
= 118.71 g/mol + 141.80 g/mol
= 260.51 g/mol
So the molar mass of SnCl4 is 260.51 g/mol.
Explanation:
t a fixed temperature and number of moles, the initial volume and pressure of a helium gas sample are 153 ml and 433 torr, respectively. what is the final volume in ml, if the final pressure is 67.1 torr?
Answer:
yes because temperature is the moles of the initial respectively in the volume torr and 433 torr fixed the temperature heliums gas sample by 153 ml thank you
a solution made with of a triprotic acid ( , ; ; ) dissolved in of solution, was titrated with . answer the following question about the of the solution, during this titration experiment: what is the ph of the solution when you have added of naoh solution?
The pH of the solution is equal to the pKa₁ of the tri-protic acid.
The pH of a solution made with a tri-protic acid dissolved in water, when titrated with NaOH, can be determined using the following equation:
pH = pKa₁ + log10 [NaOH]/[acid]
Where pKa₁ is the first dissociation constant of the acid and [NaOH] and [acid] is the molar concentrations of the NaOH and acid solutions, respectively.
In this titration experiment, if you have added 0.1 moles of NaOH solution, then the molar concentration of the NaOH solution is 0.1 M and the molar concentration of the acid solution remains unchanged. Substituting these values into the equation, we can calculate the pH of the solution:
pH = pKa₁ + log10 [0.1/[acid]] = pKa₁ + 0 =pKa₁
Therefore, the pH of the solution when 0.1 moles of NaOH has been added is equal to the pKa₁ of the tri-protic acid.
To know more about pH, refer here:
https://brainly.com/question/491373#
#SPJ11
what is the symbol (including the atomic number, mass number, and element symbol) for the oxygen isotope with 9 neutrons?
The symbol for the oxygen isotope with 9 neutrons is O-16.
The atomic number of oxygen is 8, which means it has 8 protons. The mass number for oxygen-16 is 16, which refers to the total number of particles in the nucleus (8 protons + 8 neutrons). The element symbol for oxygen is O.
Isotopes are atoms that have the same number of protons but different numbers of neutrons.
Oxygen-16 has a total of 9 neutrons, meaning it has one more neutron than the most common isotope of oxygen (oxygen-15, with 8 neutrons).
Due to the difference in neutron numbers, the atomic mass of oxygen-16 is slightly larger than oxygen-15.
Atomic mass is the combined mass of all of the protons and neutrons in an atom's nucleus. In oxygen-16, the protons and neutrons have a combined mass of 16, hence the mass number of 16.
Oxygen-16 is an important isotope because it is present in significant amounts in the Earth's atmosphere and is used in numerous medical and scientific applications.
to know more about isotope refer here:
https://brainly.com/question/11680817#
#SPJ11
In the combustion reaction 2C2H6 +7O2 ➔ 4CO2 + 6H2O, ethane gas reacts with oxygen to produce carbon dioxide and steam. If 18.6 g of C2H6 reacts with 69.2 g of O2 to produce 54.4 g of CO2, how much steam does it produce?
Answer:
First, we need to determine the limiting reactant in the reaction. We can do this by calculating the amount of CO2 that would be produced by each reactant and comparing them.
For C2H6:
Molar mass of C2H6 = 2(12.01 g/mol) + 6(1.01 g/mol) = 30.07 g/mol
Moles of C2H6 = 18.6 g / 30.07 g/mol = 0.619 mol
Moles of CO2 produced = 4 mol CO2 / 2 mol C2H6 * 0.619 mol C2H6 = 1.238 mol CO2
Mass of CO2 produced = 1.238 mol CO2 * 44.01 g/mol = 54.4 g
For O2:
Molar mass of O2 = 2(16.00 g/mol) = 32.00 g/mol
Moles of O2 = 69.2 g / 32.00 g/mol = 2.1625 mol
Moles of CO2 produced = 7 mol CO2 / 2 mol O2 * 2.1625 mol O2 = 7.5708 mol CO2
Mass of CO2 produced = 7.5708 mol CO2 * 44.01 g/mol = 333.5 g
Since the amount of CO2 produced by C2H6 is less than the amount produced by O2, C2H6 is the limiting reactant. Therefore, we can use the amount of C2H6 to determine the amount of H2O produced.
Moles of H2O produced = 6 mol H2O / 2 mol C2H6 * 0.619 mol C2H6 = 1.857 mol H2O
Mass of H2O produced = 1.857 mol H2O * 18.02 g/mol = 33.5 g
Therefore, 33.5 g of steam (H2O) is produced in the combustion reaction.
Mark answer as Brainliest!!
why is the hybridization model necessary to explain the bonding in a molecule such as ch4? select all that apply.
It helps explain why there are 4 equivalent C-H bonds in CH4,It allows for a better representation of the arrangement of electrons in the molecule, and It helps explain why the dipole moment of the molecule is zero.
What is hybridization?Hybridization is the process of combining two or more distinct entities to create a new, unique entity that has a combination of the characteristics of the original entities. It can be used to describe a wide range of phenomena, ranging from the breeding of plants and animals to the intermixing of different cultures.
In biology, hybridization is the process of combining the genetic material of two different species to create a hybrid organism.
Learn more about hybridization here:
https://brainly.com/question/22765530
#SPJ1
in valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. group of answer choices true false
In valence bond theory,
covalent
bonds are described in terms of the overlap of atomic or hybrid orbitals. This statement is true. Covalent bonds are described in terms of the overlap of atomic or hybrid orbitals
A covalent bond is a chemical bond that arises from the mutual sharing of electrons between atoms. It is formed when two atoms share a pair of electrons, with each atom contributing one electron to the pair.
In valence bond theory, covalent bonds are explained by the overlap of atomic or hybrid orbitals.
Orbitals
are regions of space around an atomic nucleus where an electron is most likely to be found.
An atomic orbital can hold a maximum of two electrons with opposite spins. Each atom has a certain number of valence electrons in its outermost shell.
These valence electrons can participate in the formation of chemical bonds.
During the formation of a covalent bond, the valence orbitals of the two atoms overlap with each other, allowing their valence
electrons
to interact and form a shared electron pair.
The degree of overlap between the atomic orbitals determines the strength of the covalent bond. The greater the overlap, the stronger the bond. The shape of the orbitals also affects the type of bond that is formed.
For example, when two s orbitals overlap, a sigma bond is formed, while when two p orbitals overlap, a pi bond is formed.
In hybrid orbitals, the orbitals of different shapes and energies can combine to form a new set of orbitals that are better suited for bonding.
In valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. This theory explains how atoms bond with each other and form new molecules.
to know more about
covalent
refer here:
https://brainly.com/question/30261436#
#SPJ11
how many kj of energy will be released when 4.72 g of carbon react with excess oxygen gas to produce carbon dioxide
When 4.72 g of carbon react with excess oxygen gas to produce carbon dioxide, 609.6 kJ of energy will be released
This is because the reaction between carbon and oxygen is exothermic, meaning that energy is released when the reaction takes place.
For carbon, the energy released per mole is 717 kJ. For oxygen, the energy released per mole is 498 kJ.
The total energy released in the reaction, you need to multiply the energy released per mole by the number of moles of each element present in the reaction.
In this reaction, 4.72 g of carbon and excess oxygen are present. The atomic mass of carbon is 12.0107 g/mol, which means that 0.3948 moles of carbon are present in 4.72 g.
The atomic mass of oxygen is 15.999 g/mol, which means that 6.26 moles of oxygen are present.
Multiplying the energy released per mole of each element by the number of moles present in the reaction yields the total energy released.
This is equal to 717 kJ/mol x 0.3948 mol = 282.3 kJ, and 498 kJ/mol x 6.26 mol = 3127.48 kJ.
Adding these two values together gives the total energy released in the reaction,
which is equal to 3127.48 kJ + 282.3 kJ = 3409.78 kJ. Since 1 kJ = 1000 J, the total energy released in this reaction is 3409.78 kJ = 3.40978 x 10^6 J.
to know more about carbon refer here:
https://brainly.com/question/22530423#
#SPJ11
. a scientist begins with 200 grams of a radioactive substance. after 210 minutes, the sample has decayed to 31 grams. to the nearest hundredth of a minute, what is the half-life of this substance?
Answer: The half-life of this radioactive substance is 52.38 minutes.
This is calculated by dividing the time period (210 minutes) by the natural log of the ratio of the initial amount of the substance (200 grams) to the remaining amount (31 grams).
Half-life is the amount of time it takes for a substance to decrease by half. In this case, it took 210 minutes for the sample to decrease from 200 grams to 31 grams, which is a decrease of 169 grams. This means that the half-life is 52.38 minutes, or 3,143.8 seconds.
Half-life is an important concept in physics, particularly in the study of radioactive substances. It is used to predict the decay of a substance over time, as well as the rate of decay of a substance. Knowing the half-life of a substance can help researchers determine how quickly a substance will reach a particular amount, as well as how quickly a substance will decay.
In this example, the scientist was able to determine that it took 52.38 minutes for the sample to decay by half. This allowed the scientist to determine the rate of decay and predict how much of the substance will remain after a given amount of time.
Overall, the half-life of this radioactive substance is 52.38 minutes. This is determined by dividing the time period (210 minutes) by the natural log of the ratio of the initial amount of the substance (200 grams) to the remaining amount (31 grams). Half-life is an important concept in physics that can be used to predict the rate of decay of a substance over time.
Learn more about radioactive substances here:
https://brainly.com/question/1160651#
#SPJ11
once you have extracted caffeine, how will you confirm that it is caffeine? how will you test the purity of your caffeine? select three techniques to characterize your substance and describe what information each technique can provide you.
To recognize and test the purity of caffine , the tests which could be performed are melting point determination, UV-visible spectroscopy, and high-performance liquid chromatography (HPLC).
In order to identify that the given substance is caffeine, you can use several analytical techniques. Here are three techniques to characterize caffeine and their applications:
Melting Point Determination:
It is a physical method which is used in order to determine the purity of a substance. The melting point of caffeine is in the range of 235-238 °C. Hence, by measuring the melting point of the extracted caffeine and comparing it with the expected value of pure caffine, you can confirm that the substance you have extracted is caffeine.
UV-Visible Spectroscopy:
UV-Visible spectroscopy can be used to identify caffeine by analyzing the absorption of UV light by the molecule. Caffeine has a characteristic absorption peak at 273 nm. By measuring the UV spectrum of the extracted caffeine and comparing it to the literature value, you can confirm the presence of caffeine.
High-Performance Liquid Chromatography (HPLC):
It is a widely used technique for the separation, identification, and quantification of substances. By using this technique, you can separate and quantify the different components of the extracted caffeine, including its impurities. By comparing the range of melting point of the caffeine to the peak areas of known standards, you can calculate the purity of your extracted caffeine.
Therefore it can be said that the melting point determination, UV-Visible spectroscopy, and High-Performance Liquid Chromatography are three analytical techniques that can be used to confirm the identity and purity of extracted caffeine.
Learn more about caffine :
https://brainly.com/question/24482629
#SPJ4
how many glyceraldehyde 3-phosphate (g3p) molecules would be produced by 18 turns of the calvin cycle?
Eighteen turns of the Calvin cycle would produce 36 G3P molecules.
The Calvin cycle, also known as the dark cycle, is a metabolic process that occurs in plants and algae. The cycle is made up of a series of chemical reactions that convert carbon dioxide into glucose.
Glyceraldehyde 3-phosphate (G3P) is a three-carbon sugar that is one of the products of the Calvin cycle. Six CO2 molecules and six ribulose-1,5-bisphosphate molecules enter the cycle to create twelve 3-phosphoglycerate molecules.
Twelve ATP molecules and twelve NADPH molecules are then used to transform the 3-phosphoglycerate molecules into twelve G3P molecules. Ten out of twelve G3P molecules are used to regenerate six ribulose-1,5-bisphosphate molecules, while two are used to create glucose or other organic compounds.
Each turn of the Calvin cycle produces one G3P molecule, while each glucose molecule requires two G3P molecules. This implies that 36 G3P molecules would be produced by 18 turns of the Calvin cycle.
To know more about Calvin cycle, refer here:
https://brainly.com/question/30808737#
#SPJ11
Which of the following amino acid side chains is least likely to be a nucleophile in covalent catalysis?
A. H
B. D
C. K
D. F
E. S
The amino acid side chain least likely to be a nucleophile in covalent catalysis is D. F (phenylalanine).
Covalent catalysis occurs when a chemical reaction is facilitated by a temporary covalent bond between the enzyme and the substrate.
In this mechanism, a nucleophile on the enzyme side chain attacks the substrate, forming a covalent intermediate that is then broken down to form the product.
A nucleophile is a chemical species that donates a pair of electrons to form a chemical bond. In the context of covalent catalysis, the nucleophile on the enzyme side chain is typically a reactive group such as a thiol, hydroxyl, or amino group.
Phenylalanine, which has a phenyl side chain, is not typically considered a nucleophile in covalent catalysis. This is because the phenyl group is nonpolar and lacks a functional group that can act as a nucleophile.
In contrast, amino acids such as cysteine, serine, and histidine, which have thiol, hydroxyl, and imidazole side chains, respectively, are commonly involved in covalent catalysis as nucleophiles.
Therefore, option D is correct, and F (phenylalanine) is the amino acid side chain least likely to be a nucleophile in covalent catalysis.
To learn more about covalent catalysis, refer below:
https://brainly.com/question/30544228
#SPJ11
What must happen for a binary ionic bond to form between the atoms of two elements?
A. Both elements must gain one or more electrons. B. Both elements must lose one or more electrons. C. One element must lose one or more electrons, while the other must gain one or more electrons. D. One element must lose one or more protons, while the other must gain one or more protons
Both elements must lose one or more electrons. In a binary ionic bond, one element donates one or more electrons to the other element, which accepts the electrons. So the correct option is B .
This results in one element becoming a cation (a positively charged ion) and the other element becoming an anion (a negatively charged ion). The attraction between the opposite charges holds the two ions together in a crystal lattice, forming an ionic bond.
For example, in the formation of sodium chloride (NaCl), sodium donates one electron to chlorine, which accepts the electron, forming Na+ and Cl- ions. The attraction between the Na+ and Cl- ions forms the ionic bond in NaCl.
Learn more about binary ionic
https://brainly.com/question/7960132
#SPJ4
how would the rf value of eugenol change if the mobile phase was changed to 40%ethyl acetate in hexanes? briefly explain your reasoning.
The RF value of eugenol will increase if the mobile phase is changed to 40% ethyl acetate in hexanes.
This is because the polarity of ethyl acetate is higher than that of hexanes, making it a better solvent for the eugenol to dissolve in. Therefore, the RF value will increase as the compound is able to move further up the TLC plate.
To illustrate, when the eugenol is placed on a TLC plate with a mobile phase consisting of 40% ethyl acetate in hexanes, the eugenol will dissolve in the ethyl acetate and migrate towards the top of the plate.
The RF value is the distance that the solvent front has traveled, in relation to the distance traveled by the compound, so it will be higher when the compound has been able to move further up the plate.
In conclusion, the RF value of eugenol will increase when the mobile phase is changed to 40% ethyl acetate in hexanes due to the higher polarity of the ethyl acetate, allowing the compound to move further up the TLC plate.
To know more about RF value refer here:
https://brainly.com/question/31117352#
#SPJ11
citric acid, which is present in citrus fruits, is a triprotic acid. calculate the ph and the citrate ion concentration for a 0.05 m solution of citric acid.
The pH and the citrate ion concentration for a 0.05 M solution of citric acid which is a tricrotic acid and is present in citrus fruits are to be calculated. The formula of citric acid is C6H8O7.
It's three hydrogen atoms (H) have three different pKa values because of the differences in the proton-donating properties, which will be used to calculate the citrate ion concentration. The given formula of Citric acid is C6H8O7There are three acidic hydrogens in citric acid.
The acid dissociation constant, Ka, for citric acid is given as follows: Ka1 = 7.4 × 10−4Ka2 = 1.7 × 10−5Ka3 = 4.0 × 10−7Step 1: Writing the equation for the first dissociationKa1 = [H+][C6H7O7–] / [C6H8O7]where [H+] is hydrogen ion concentration, [C6H7O7–] is citrate ion concentration, and [C6H8O7] is citric acid concentration. Citrate ion concentration = C6H7O7–Citrate ion concentration = (0.05 − [H+C6H7O7−])/2= (0.05 − 3.7 × 10−5) / 2= 0.0248The concentration of the citrate ion is 0.0248.Step 6: Computing the pH from the hydrogen ion concentration pH = −log10[H+]pH = −log10(3.7 × 10−5)= 4.43The pH of a 0.05 M solution of citric acid is 4.43.
Read more about concentration :
https://brainly.com/question/17206790
#SPJ11
how does melting and boiling point support the fact that elements in the same group have similar properties
Elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.
The melting point and boiling point of elements are both important indicators of an element’s chemical and physical properties.
Elements in the same group of the periodic table typically share similar melting and boiling points due to their similar chemical properties.
The melting point of an element is the temperature at which the solid phase of the element turns into a liquid. Similarly, the boiling point is the temperature at which the liquid phase of the element turns into a gas.
The melting and boiling points of elements in the same group tend to be very close, which indicates that the elements have similar physical and chemical properties.
This is because elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.
By understanding the melting and boiling points of elements in a group, scientists can more accurately predict the properties of the element in different phases of matter.
to know more about elements refer here:
https://brainly.com/question/24407115#
#SPJ11
Compute the wavelength of the radio waves from the following stations.
(a) an AM station operating at a frequency of 830 kHz
m
(b) an FM station with a frequency of 93.9 MHz
m
Answer:
a. 3.19 m
b. 361.45 m
Explanation:
wavelength = speed of light ÷ frequency
speed of light = 3.00 x 10^8 m/s
AM is KILOhertz
830 kHz = 830,000 Hz
FM is MEGAhertz
93.9 MHz = 93,900,000 Hz
a.
wavelength = 3.00 x 10^8 m/s ÷ 830,000 Hz =
361.45 m
b.
wavelength = 3.00 x 10^8 m/s / 93,900,000 Hz = 3.19 m
calculate the density (in grams per milliliter) for a glass marble with a volume of 7.94 ml and a mass of 15.36 g.
To calculate the density (in grams per milliliter) for a glass marble with a volume of 7.94 ml and a mass of 15.36 g, you must divide the mass by the volume. In this case, the density would be 1.93 g/mL.
To solve this problem mathematically:
Step 1: Identify the mass (m) and volume (v) of the marble.
Mass (m) = 15.36 g
Volume (v) = 7.94 mL
Step 2: Divide the mass by the volume to calculate the density.
Density (d) = m/v
Density (d) = 15.36 g / 7.94 mL
Density (d) = 1.93 g/mL
Therefore, the density of the glass marble is 1.93 g/mL.
For more such questions on density
https://brainly.com/question/26364788
#SPJ11
calculate the total pressure, in atm, in a 2 l flask that contains 5.33 g of ne and 13.40 g of ar. the temperature of the gases is 38 oc.
The total pressure in a 2 L flask that contains 5.33 g of Ne and 13.40 g of Ar at 38°C is 5.20 atm.
To calculate the total pressure, you must use the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the amount of gas (in moles), R is the gas constant, and T is temperature in Kelvin.
You must first convert the temperature from Celsius to Kelvin (38°C = 311.15 K). Next, you must convert the mass of each gas into moles (5.33 g Ne = 0.01502 mol, 13.40 g Ar = 0.2225 mol).
Finally, you can calculate the total pressure (P = (0.01502 mol Ne + 0.2225 mol Ar) * 0.08206 L atm K⁻¹ mol⁻¹ * 311.15 K/ (2 L) = 5.20 atm).
To know more about ideal gas law click on below link:
https://brainly.com/question/28257995#
#SPJ11
in both parts of the activity, you conducted a second trial without having to remix the chemicals. how was this possible?
As long as the same amount of chemicals and the same reaction conditions are used, the reaction should proceed in the same way, resulting in the same products and reactions.
Therefore, repeating the experiment using the same chemicals and conditions should yield similar results without the need to remix the chemicals. This is possible because chemical reactions follow the law of conservation of mass, which states that matter cannot be created or destroyed, only rearranged.
What is law of conservation?
The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system (in a chemical reaction or physical change) remains constant, regardless of the processes or transformations that occur within the system. In other words, matter cannot be created or destroyed, only transformed or rearranged in a chemical reaction or physical change. This law is a fundamental principle of chemistry and is widely used in chemical calculations and experiments.
To know more about chemicals, visit:
https://brainly.com/question/30970962
#SPJ1
which of these can be used to represent octane? group of answer choices c8h18 ch3(ch2)6ch3 ch3ch2ch2ch2ch2ch2ch2ch3 all of these are correct
Octane can be represented in a variety of ways, depending on the type of chemistry equation being used. The most common representation of octane is C8H18.
This represents the fact that octane is a molecule composed of 8 carbon atoms and 18 hydrogen atoms.
It can also be represented as CH3(CH2)6CH3, which is the formula of octane's molecular structure - 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.
Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3, which is a simplified way of writing the same molecular structure. All of these forms are correct representations of octane.
The most common way to represent octane is with the chemical formula C8H18. This chemical formula is an indication of the molecular structure of octane.
This chemical formula indicates that octane is composed of 8 carbon atoms and 18 hydrogen atoms.
These carbon and hydrogen atoms are connected together to form a molecule, with the bonds between the atoms being either single or double bonds.
Octane can also be represented as CH3(CH2)6CH3. This is a simplified version of the chemical formula C8H18, and it represents the molecular structure of octane.
The 8 carbon atoms and 18 hydrogen atoms are shown as 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.
The hydrogen atoms are represented by the "CH2" part of the formula, while the carbon atoms are represented by the "CH3" part.
Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3.
This is another simplified version of the chemical formula C8H18, and it also represents the molecular structure of octane.
Each of the 8 carbon atoms is represented by the "CH3" part, while each of the 18 hydrogen atoms is represented by the "CH2" part.
This representation is often used to explain the structure of octane in a more visual way.
All of the above forms are valid representations of octane. Depending on the type of chemistry equation being used, any of the above forms can be used to represent octane.
to know more about octane refer here:
https://brainly.com/question/21268869#
#SPJ11
what metal hydride reducing agent is used in this experiment? what product would be formed if catalytic hydrogenation with h2 were used?
The metal hydride reducing agent used in this experiment is sodium borohydride (NaBH₄).
If catalytic hydrogenation with H2 were used, the product would be an alkane with a double bond reduced to a single bond.
Sodium borohydride (NaBH₄) is a strong reducing agent capable of reducing aldehydes and ketones to their corresponding alcohols. It works by donating protons to the carbon-oxygen double bond, leading to the formation of an alkoxide intermediate.
The alkoxide is then reduced to the corresponding alcohol by hydrogen transfer from the hydride ion. Catalytic hydrogenation with H₂ will reduce the double bond to a single bond, producing an alkane product.
This process is used to produce a range of organic products in the laboratory, and is a very useful tool in organic synthesis.
To know more about reducing agent click on below link:
https://brainly.com/question/2890416#
#SPJ11
Complete orbital diagrams (boxes with arrows in them) to represent the electron configuration of valence electrons of carbon before and after sp hybridization Drag the appropriate labels to their respective targets. Labels can be used once, more than once, or not at all. Reset Help Before hybridization 2s 2p After hybridization sp 2p
The electron configuration of valence electrons of carbon before and after sp hybridization are shown below:Before hybridization: 2s2 2p2After hybridization: sp2 2p2The orbital diagram before sp hybridization shows two electrons in the 2s orbital and two electrons in each of the 2p orbitals. After hybridization, the 2s orbital mixes with one of the 2p
orbitals to form two sp hybrid orbitals. These sp hybrid orbitals are oriented at 180° to each other, which allows maximum overlap with two 2p orbitals of the carbon atom. The remaining 2p orbital remains unhybridized and
unchanged. Therefore, the hybridized orbitals contain only one electron each and the unhybridized 2p orbital has two electrons.The boxes with arrows in the orbital diagram represent the orbitals and their electrons. The label "2s" is
dragged to the box representing the 2s orbital before hybridization. Similarly, the labels "2p" and "sp" are dragged to the boxes representing the unhybridized and hybridized orbitals after hybridization, respectively. The label "2p" is also dragged to the unhybridized 2p orbital after hybridization.
For more similar questions on hybridization
brainly.com/question/30902614
#SPJ11
which type of chemical formula tells how many atoms of each element are in a molecule but does not indicate their arrangement?
Answer: The type of chemical formula that tells how many atoms of each element are in a molecule but does not indicate their arrangement is a molecular formula.
What is a molecular formula?
A molecular formula is a chemical formula that displays the exact number of atoms of each element in one molecule of a compound, but it does not reveal how the atoms are arranged in a molecule.
A molecular formula is a symbolic representation of a molecule’s elements and the number of atoms of each element present in one molecule of that substance.
A molecular formula provides information about the kinds of atoms present in a molecule and the number of each kind of atom present, but it does not provide information about the structure of the molecule.
In other words, a molecular formula only tells us the number of atoms of each element present in a molecule and not their arrangement.
What is a chemical formula?
A chemical formula is a method of expressing the structure of a molecule in a short, concise form. Chemical formulas depict the number of atoms of each element in a molecule using chemical symbols, numerals, and other chemical shorthand. Chemical formulas can be used to represent both ionic and covalent compounds.
Learn more about molecular formula here:
https://brainly.com/question/28647690#
#SPJ11