I have attempted to do this myself, but I would appreciate any corrections

1. The concentration of the hydronium ion, [H₃O⁺] is 3.02×10⁻¹⁰ M

2. The concentration of the hydroxide ion, [OH⁻] is 3.31×10⁻⁵ M

The concentration of the hydronium ion, [H₃O⁺], can be obtained as follow:

pH of a solution is given by the following formula:

pH = -Log [H₃O⁺]

Inputting the various parameters, we have

9.52 = -Log [H₃O⁺]

Multiply through by -1

-9.52 = Log [H₃O⁺]

Take the anti-log of -9.52

[H₃O⁺] = Anti-log -9.52

[H₃O⁺] = 3.02×10⁻¹⁰ M

The value of the the hydroxide ion, [OH⁻], can be obtained as follow:

[H₃O⁺] × [OH⁻] = 10¯¹⁴

3.02×10⁻¹⁰ × [OH⁻] = 10¯¹⁴

Divide both side by 3.02×10⁻¹⁰

[OH⁻] = 10¯¹⁴ / 3.02×10⁻¹⁰

[OH⁻] = 3.31×10⁻⁵ M

Learn more about hydroxide ion concentration, [OH⁻]:

https://brainly.com/question/19800885

#SPJ1

A volume of 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.

The balanced chemical equation for the reaction:

F₂(g) + H₂O(g) → 2HF(g) + O₂(g)

From this equation, we see that 1 mole of fluorine reacts to form 2 moles of hydrogen fluoride.

The given mass of fluorine is not provided in the question. Let's suppose the mass of fluorine is 1 gram.

To convert 1 gram of fluorine to moles, we will use its molar mass. The molar mass of fluorine is 18.998 g/mol.

Hence,1 g F₂ × (1 mol F2/18.998 g F₂) = 0.0526 mol F₂

Since 1 mole of F2 reacts to form 2 moles of HF, the number of moles of HF produced will be:

0.0526 mol F₂ × (2 mol HF/1 mol F₂) = 0.1052 mol HF

We need to assume some values for pressure and temperature. Let's assume that the pressure is 1 atm and the temperature is 273 K.

We will also need to know the volume of water vapor involved in the reaction.

Let's suppose that the volume of water vapor is 1 L.

Using these assumptions, we can calculate the volume of hydrogen fluoride as follows:

PV = nRT

Where P = 1 atm, V is the volume of HF, n = 0.1052 mol, R = 0.0821 L atm/mol K, and T = 273 K.

Substituting these values, we get:

V = (nRT)/P = (0.1052 mol × 0.0821 L atm/mol K × 273 K)/1 atm = 2.28 L

Therefore, 2.28 liters of hydrogen fluoride would be produced by this reaction if 1 gram of fluorine was consumed.

Learn more about molar mass here:

https://brainly.com/question/837939

#SPJ11

Answer:

5.41 M

Explanation:

To calculate the molarity of a saturated solution of NaCl, we first need to calculate the amount of NaCl in the solution:

35.8 g of NaCl per 135.8 g of solution means that the mass of NaCl in the solution is:

mass of NaCl = 35.8 g

The density of the solution is 1.20 g/mL, so the volume of the solution can be calculated as:

volume of solution = mass of solution / density of solution

volume of solution = 135.8 g / 1.20 g/mL

volume of solution = 113.17 mL

Now we need to convert the volume of the solution to liters:

volume of solution = 113.17 mL = 0.11317 L

To calculate the molarity of the solution, we need to know the number of moles of NaCl in the solution. We can calculate this using the formula:

moles of solute = mass of solute / molar mass of solute

The molar mass of NaCl is 58.44 g/mol, so:

moles of NaCl = 35.8 g / 58.44 g/mol

moles of NaCl = 0.612 mol

Now we can calculate the molarity of the solution using the formula:

molarity = moles of solute / liters of solution

molarity = 0.612 mol / 0.11317 L

molarity ≈ 5.41 M

Answer: There are approximately 141.7 moles

Explanation:

To convert the number of molecules of a substance to the number of moles, we need to divide the number of molecules by Avogadro's Number, which is approximately 6.022 x 10^23 molecules per mole.

Therefore, to calculate the number of moles in 8.52 x 10^33 molecules of carbonic acid (H2CO3), we can use the following formula:

Number of moles = Number of molecules / Avogadro's Number

Number of moles = 8.52 x 10^33 / 6.022 x 10^23

Number of moles = 141.7 mol

Therefore, there are approximately 141.7 moles of carbonic acid in 8.52 x 10^33 molecules of carbonic acid.

Read more about Moles and Molecules:

https://brainly.com/question/24191825

The type of bond responsible for holding two water molecules together, creating the properties of water, is a polar covalent bond.

Explanation: The type of bond that is responsible for holding two water molecules together, creating the properties of water is hydrogen bond.What is a hydrogen bond?A hydrogen bond is a type of chemical bond that exists between two electrically polar molecules. Hydrogen bonds are much weaker than covalent or ionic bonds, but they do serve a significant purpose in both organic and inorganic chemistry. Example of a hydrogen bond, one example of a hydrogen bond is found in between two water molecules. Each water molecule is composed of two hydrogen atoms and one oxygen atom, and each hydrogen atom is bonded covalently to the oxygen. However, the shared electrons are not distributed evenly between the two atoms. Because oxygen is more electronegative than hydrogen, it pulls electrons away from the hydrogen atoms, resulting in a slight charge imbalance within the molecule. The oxygen atom in one water molecule is therefore attracted to the hydrogen atoms in another water molecule. This attraction produces a hydrogen bond between the two molecules, which helps to hold them together.

For more such questions on polar covalent bond

https://brainly.com/question/13560841

#SPJ11

The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.

The Arrhenius equation is

[tex]k = A e^{-\frac{E_a}{RT}}[/tex]

where:

k is the rate constant is the pre-exponential factor

Ea is the activation energy

R is the gas constant

T is the temperature in Kelvin

According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.

The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.

Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.

To learn more about activation energy refer - brainly.com/question/14776335

#SPJ11

The value of the constant, k, for this data is 51.5.

option D.

To determine the constant k, we can use the formula:

PV = k

where;

We can rearrange the formula to solve for k:

k = PV

Now, we can multiply the pressure and volume values for each data point to get the corresponding value of k:

For the first data point: k = 1.15 kg/cm² x 44.8 mL = 51.52

For the second data point: k = 1.24 kg/cm² x 41.5 mL = 51.40

For the third data point: k = 1.47 kg/cm² x 35.0 mL = 51.45

We can take the average of these values to get an overall value for k:

k = (51.52 + 51.40 + 51.45) / 3 = 51.46 ≈ 51.5

Learn more about constant here: https://brainly.com/question/27983400

#SPJ1

Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.

The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.

To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.

Know more about mass here:

https://brainly.com/question/14014782

#SPJ11

When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.

Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.

Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.

Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.

To know more about molecules, here

brainly.com/question/4745152

#SPJ4

--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--

A combination of sodium chloride and bicarbonate in a 1:1 ratio is the best choice for creating an approximate buffer solution that mimics the one found in the human bloodstream. This solution helps to maintain the ideal pH balance in the body and ensures optimal functioning.

The bicarbonate acts as a buffer by quickly neutralizing any acidity or alkalinity in the bloodstream, while the sodium chloride acts to further stabilize the pH levels. The buffer solution helps to maintain the optimal pH level of 7.4 in the bloodstream, and keeps the body functioning optimally.

It is important to note that the exact ratio of compounds in the buffer system will vary depending on the individual. For example, the ratio of NaCl to HCO3- may be slightly different from one person to the next. In addition, other compounds such as proteins, amino acids, and phosphates may also be present in small amounts.

Know more about buffer system here:

https://brainly.com/question/22821585

#SPJ11

Explanation:

If we look at the definition of the second electron affinity:

The second electron affinity is the enthalpy change when one mole of gaseous 2⁻ ions is formed from one mole of gaseous 1⁻ ions

The equations of the second electron affinity for oxygen and sulfur:

O⁻ (g) + e⁻ → O²⁻ (g)

S⁻ (g) + e⁻ → S²⁻ (g)

This process is endothermic as we are trying to combine an electron with a negative ion, and so we must overcome the repulsion. Applying energy will overcome it.

The second electron affinity is the energy change that occurs when an atom in the gaseous state gains an additional electron.

For both oxygen and sulfur, the second electron affinity values are unfavorable, meaning that the energy change that occurs is endothermic. This means that energy is being absorbed by the atom, and the atom is becoming more stable.
To understand why the second electron affinity values for oxygen and sulfur are unfavorable, it is important to look at the electron configurations of these atoms. Oxygen's electron configuration is 2s22p4, meaning it has 8 electrons in its outermost shell. Sulfur has an electron configuration of 2s22p63s2, meaning it has 16 electrons in its outer shell. Since both of these atoms have a full outer shell of electrons, they are not in need of an additional electron, and therefore do not have a strong tendency to gain one. As a result, it takes a lot of energy for the atom to gain an additional electron, meaning the second electron affinity value is unfavorable (endothermic).

In conclusion, the second electron affinity values for oxygen and sulfur are unfavorable (endothermic) because they already have full outer shells of electrons and do not have a strong tendency to gain an additional electron.

To know more about endothermic reaction  click on below link :

https://brainly.com/question/23184814

#SPJ11

The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:

First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.

To know more about pH  click on below link :

https://brainly.com/question/491373#

#SPJ11

The oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2.

When a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. This is because the non-metal takes electrons from the metal, making the metal's charge positive.
In this reaction, the Zn atom is oxidized by the HCl molecule. Oxidation is defined as the loss of electrons. Zn is being oxidized because it is losing electrons to the HCl molecule. Since HCl is a non-metal, it is gaining electrons from Zn, thus making the oxidation number of Zn positive. The oxidation number of Zn is +2.

To sum up, the oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2. This is because when a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. In this reaction, the Zn atom is being oxidized by the HCl molecule, which is gaining electrons from Zn, thus making the oxidation number of Zn positive and equal to +2.

To know more about oxidation click on below link :

https://brainly.com/question/9496279#

#SPJ11

Under identical conditions, it would take the same amount of gaseous I2 to effuse from the same container as it did for N2O, but it would take longer.

This is because I2 is a larger molecule than N2O, so it has greater difficulty passing through the small spaces in the container. The larger the molecule, the slower the effusion rate.

In general, effusion rates are inversely proportional to the square root of the molecular weight of a gas. This means that the molecular weight of I2 is four times larger than that of N2O, so it would take approximately twice as long for I2 to effuse from the container. In this case, it would take approximately 98 seconds for the same amount of gaseous I2 to effuse from the container under identical conditions.

Know more about effusion rate here

https://brainly.com/question/8804761#

#SPJ11

From the solubility curve:

According to the solubility curve for KNO₃, approximately 40 grams of KNO₃ can be dissolved at 50°C.

a. Since 45g of NaNO₃ in 100 g of water at 30°C is below the saturation point, the solution is unsaturated.

b. Since 60g of KClO3 in 100 g of water at 60°C is above the saturation point, the solution is supersaturated.

To determine how many grams of NaNO₃ are required to saturate 100 grams of water at 75°C, we need to look at the solubility curve for NaNO₃. At 75°C, approximately 75 grams of NaNO₃ can be dissolved in 100 grams of water. Therefore, to saturate 100 grams of water, we would need to add 75 grams of NaNO₃.

To find the temperature at which 25g of KClO₃ dissolves, we need to look at the solubility curve for KClO₃. At 25g, the curve intersects the solubility line at approximately 45°C, so 25g of KClO₃ would dissolve at 45°C.

Learn more on saturation point here: https://brainly.com/question/23866986

#SPJ1

The pH of a 0.20 M acetic acid solution is 2.72.

The pH of a 0.20 M acetic acid solution can be calculated using the Ka of acetic acid, CH3COOH, which is 1.8 x 10-5.

We will use the equation for the dissociation of acetic acid to calculate the pH of the solution.

CH3COOH(aq) + H2O(l) ⇌ H3O+(aq) + CH3COO-(aq)

The equilibrium constant expression for the dissociation of acetic acid is given by

Ka = [H3O+][CH3COO-] / [CH3COOH].

Since we know the value of Ka and the initial concentration of acetic acid, we can solve for

the concentration of H3O+.Ka = [H3O+][CH3COO-] / [CH3COOH]

1.8 x 10-5 = [H3O+]2 / 0.20[H3O+]2 = 3.6 x 10-6[H3O+] = 1.9 x 10-3 M

The pH of the solution can then be calculated as:

pH = -log[H3O+]pH = -log(1.9 x 10-3)

pH = 2.72

Therefore, the pH of a 0.20 M acetic acid solution is 2.72.

To know more about pH, refer here:

https://brainly.com/question/30255888#

#SPJ11

Answer:

Equilibrium is basically the balance between two opposing forces.  

Acetylsalicylic acid, is the active ingredient in aspirin. 68 is the number of valence electrons are present in the lewis structure for this molecule.

A valence electron is an electron that is part of an atom's outer shell in chemistry and physics. If the outer shell is open, the valence electron can take part in the formation of a chemical bond. Each atom in the bond contributes one valence electron, forming a shared pair in a single covalent bond. The chemical properties of an element, such as its valence—whether it can connect with other elements and, if so, how quickly and with how many—may be affected by the existence of valence electrons.

C =4 valence electrons.

H = 1 valence electron.

O=6 valence electrons.

9 C x 4 valence electrons = 36 valence electrons

8 H x 1 valence electron = 8 valence electrons

4 O x 6 valence electrons = 24 valence electrons

Total valence electrons = 36 + 8 + 24 = 68

To know more about valence electron, here:

https://brainly.com/question/31264554

#SPJ12

The suggested name of the substance represented in the diagram is ozone, and its chemical formula is O₃.

Ozone is a triatomic molecule, which means it is made up of three oxygen atoms (O). In the sketch you provided, the three oxygen atoms are represented by the letter "O" with a dot inside, which is a common way to depict atoms in chemical structures.

The structure of ozone is often depicted using a resonance structure, which means that the electrons are spread out evenly between the three oxygen atoms. This makes the molecule more stable and less reactive than it would be if the electrons were concentrated on one or two atoms.

Ozone is a pale blue gas with a pungent odor. It is found in small amounts in the Earth's atmosphere, where it plays an important role in protecting the planet from harmful ultraviolet radiation from the sun. However, at ground level, ozone can be harmful to human health and the environment. Ozone is a strong oxidizing agent and can damage lung tissue, and it can also harm plants and animals.

Learn more about Ozone here: https://brainly.com/question/26254261

#SPJ1

The atomic mass of Li is 6.94 amu.

Li has two natural isotopes: Li-6 (6.015 amu) and Li-7 (7.016 amu). The atomic mass of element Li can be calculated given the abundance of Li-7 is 92.5%. The correct answer is 6.94 amu.Atomic mass is defined as the mass of an atom of an element. It is the sum of the masses of the protons and neutrons present in the atomic nucleus. The atomic mass is usually given in atomic mass units (amu) and is measured using mass spectrometry. Atomic mass is also known as atomic weight.The atomic mass of Li can be calculated as follows:atomic mass of Li = (abundance of Li-6 × atomic mass of Li-6) + (abundance of Li-7 × atomic mass of Li-7)Given,Abundance of Li-6 = 100% - 92.5% = 7.5%Abundance of Li-7 = 92.5%Atomic mass of Li-6 = 6.015 amuAtomic mass of Li-7 = 7.016 amuSubstitute the values in the formula to obtain the atomic mass of Li.atomic mass of Li = (0.075 × 6.015) + (0.925 × 7.016)= 0.45113 + 6.4914= 6.94253≈ 6.94 amu Therefore, the atomic mass of Li is 6.94 amu. An atom is composed of electrons, protons, and neutrons. An atom with a specific number of protons in its nucleus is referred to as an element. A variety of isotopes with different masses can be produced by different atoms of the same element. Naturally occurring isotopes are referred to as natural isotopes.

Learn more about Atomic mass

brainly.com/question/5661976

#SPJ11

The percent by mass of each component of the solution is water: 35.5%, 2-methylpyrazine: 32.73%, and methanol: 31.82%, rounded to 2 significant digits.

The percentage by mass of each component of a solution containing 39. g of water, 36. g of 2-methylpyrazine, and 35. g of methanol can be calculated as follows:

Mass of water = 39. g

Mass of 2-methylpyrazine = 36. g

Mass of methanol = 35. g

Total mass of solution = (39. g + 36. g + 35. g) = 110. g

Percentage by mass of water = (Mass of water/Total mass of solution) × 100= (39. g/110. g) × 100= 35.45% (rounded to 2 significant digits)

Percentage by mass of 2-methylpyrazine = (Mass of 2-methylpyrazine/Total mass of solution) × 100= (36. g/110. g) × 100= 32.73% (rounded to 2 significant digits)

Percentage by mass of methanol = (Mass of methanol/Total mass of solution) × 100= (35. g/110. g) × 100 = 31.82% (rounded to 2 significant digits)

Therefore, the percentage by mass of water is 35.45%, the percentage by mass of 2-methylpyrazine is 32.73%, and the percentage by mass of methanol is 31.82%.

The question you wrote is incomplete, maybe the complete question is:

chemist mixes 39. g of water with 36. g of 2-methylpyrazine and 35. g of methanol. Calculate the percent by mass of each component of this solution. Round each of your answers to 2 significant digits component mass percent.

Learn more about percentage by mass at https://brainly.com/question/26150306

#SPJ11

While calculating the mass for chloride, a student comes up with a negative number. The most likely the reason for this error, assuming they did the math correctly is that the student has used the wrong sign for the charge of the chloride ion.

Chloride is an anion, and its charge is negative, but the student may have used a positive sign while calculating it. For instance, the student may have assumed that the chloride ion has a charge of +1 instead of -1, which would have led to the negative mass value.

Besides that, there is no other reason for a negative mass value. The mass of a compound, such as chloride, is always positive and should not be negative at any time. Thus, it can be assumed that the student has made a mistake while assigning the sign for the charge of the chloride ion. However, it is essential to double-check the calculations to ensure that there are no other errors or mistakes in the calculations. Additionally, it is recommended to consult a teacher or a tutor for guidance in case of any confusion while calculating the mass of an ion or a compound.

Learn more about anion at:

https://brainly.com/question/14929591

#SPJ11

Bond breaking is endothermic process as it require energy and Bond forming is an exothermic process as it releases energy.

A reaction is said to be bond breaking where energy is taken in from the surroundings so the temperature of the surroundings decreases. An endothermic process is defined as any thermodynamic process with an increase in the enthalpy H of the system. In this process, a closed system usually absorbs thermal energy from its surroundings which is heat transfer into the system.

An exothermic process is defined as a thermodynamic process or reaction that releases energy from the system to its surroundings usually in the form of heat but also in a form of light, electricity, or sound. In this process energy is transferred into the surroundings rather than taking energy from the surroundings as in an endothermic reaction.

To learn more about endothermic process

https://brainly.com/question/1160007

#SPJ4

The complete question is,

What is the difference in bond breaking and bond forming.

In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446

#SPJ11

In the combustion analysis of 17.1 g of sugar (C12H22O11), the mass of O2 consumed is equal to 8.55 g.

This is due to the fact that the balanced equation for the combustion of sugar is C12H22O11 + 12 O2 --> 12 CO2 + 11 H2O.

This means that for every one mole of sugar that is combusted, 12 moles of O2 are needed.

To calculate the mass of O2 consumed, the number of moles of sugar must first be calculated using the molar mass of sugar, which is 342.3 g/mol.

Therefore, 17.1 g of sugar is equal to 0.05 moles of sugar. Then, using the balanced equation, it can be seen that 0.05 moles of sugar require 0.6 moles of O2.

Finally, the mass of O2 consumed can be determined by multiplying the number of moles of O2 by the molar mass of O2, which is 32 g/mol.

Therefore, 0.6 moles of O2 is equal to 19.2 g, which is equivalent to 8.55 g of O2 consumed.

to know moremore about combustion refer here:

https://brainly.com/question/15117038#

#SPJ11

The mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

What is mass?

The balanced chemical equation for the reaction between NaOH and CuSO4 is:

NaOH + CuSO4 -> Cu(OH)2 + Na2SO4

From the equation, we can see that 2 moles of NaOH react with 1 mole of CuSO4 to produce 1 mole of Cu(OH)2.

Therefore, to calculate the moles of Cu(OH)2 produced from 3.5 moles of NaOH, we need to use stoichiometry:

3.5 mol NaOH x (1 mol Cu(OH)2 / 2 mol NaOH) = 1.75 mol Cu(OH)2

Now, we can calculate the mass of Cu(OH)2 produced using its molar mass:

1.75 mol Cu(OH)2 x 97.56 g/mol = 170.4 g Cu(OH)2

Therefore, the mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

To know more about mass, visit:

https://brainly.com/question/28180102

#SPJ1

Complete question is: The mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

The temperature of the sample of CO² gas is 87.41 Kelvin.

Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

P₁V₁/T₁ = P₂V₂/T₂

At STP (standard temperature and pressure), the temperature is 273.15 K and the pressure is 1 atm.

Therefore, we can use the combined gas law to solve for the final temperature:

P₁V₁/T₁ = P₂V₂/T₂

Where P₁ = 1 atm, V₁ = 0.50 L, T₁ = 273.15 K, P₂ = 1.6 atm, V₂ = 0.10 L, and we are solving for T₂.

Substituting the values and solving for T2, we get:

T₂ = (P₂V₂T₁) / (P₁V₁)

T₂ = ( 1.6 atm × 0.10 L × 273.15 K) / (1 atm × 0.50 L)

T₂ = 87.41 K

Therefore, the temperature of the sample is 87.41 K.

Learn more about the combined gas law here: brainly.com/question/25944795

#SPJ1

The thiocyanate ion (SCN-) concentration equals the complex ion concentration in beakers 2-7 because the reaction that took place was a 1:1 stoichiometric reaction. This means that the moles of SCN- reactant is equal to the moles of complex product formed.

The thiocyanate ion concentration in beakers 2-7 can be assumed to equal the complex ion concentration because the reaction between the iron(III) ion and thiocyanate ion is practically irreversible. According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion.

Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.Let's use this information to provide an HTML-formatted answer below:

In beakers 2-7, the thiocyanate ion concentration is assumed to equal the complex ion concentration because the reaction between iron(III) ions and thiocyanate ions is practically irreversible.

According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion. Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.

For more such questions on stoichiometric reaction , Visit:

https://brainly.com/question/29007372

#SPJ11

20,908.6 g of precipitate were generated.

Lead (II) nitrate and Potassium iodide react to form Lead (II) iodide and Potassium nitrate.For this reaction, the chemical equation is balanced as follows:

[tex]2 Pb(NO_3)_2 + 2 KI \rightarrow 2 PbI_2 + 2 KNO_3[/tex]

To calculate the amount of precipitate produced, we first need to calculate the amount of moles of Lead (II) nitrate and Potassium iodide.

Amount of Lead (II) nitrate = 626 mL x (0.110 mol/L) = 68.86 mol

Amount of Potassium iodide = 429 mL x (3.4 mol/L) = 1458.6 mol

Since the reaction has a 2:2 mole ratio, the amount of moles of Lead (II) iodide produced is 68.86 mol.

Now, we can calculate the mass of the precipitate produced.

Mass of precipitate = 68.86 mol x (303.4 g/mol) = 20,908.6 g

Therefore, the amount of precipitate produced is 20,908.6 g.

learn more about precipitate Refer:brainly.com/question/30904755

#SPJ1