In a binary system with a 3 solar mass star and a 10 solar mass star, the 10 solar mass star would evolve off the main sequence first. This is because more massive stars have shorter lifetimes due to their higher rate of nuclear fusion.
As per the masses of the 3 solar mass star and the 10 solar mass star, the 3 solar mass star would evolve off the main sequence first if they formed together in a binary system. The main sequence is a continuous and distinctive band that appears on plots of stellar color versus brightness. Most stars are found in this band, including the Sun.
The main sequence is the band that represents the stars in the core hydrogen-burning phase. In contrast to the core helium-burning red clump giants and the helium-fusing horizontal branch stars, stars on the main sequence are in a stable state of nuclear fusion.
Because of the higher temperatures inside, more massive stars have a greater rate of nuclear reactions and consume their fuel more quickly. As a result, if a 3 solar mass star and a 10 solar mass star formed together in a binary system, the 3 solar mass star would evolve off the main sequence first.
Know more about nuclear fusion here:
https://brainly.com/question/982293
#SPJ11
the speed of sound in air is approximately the same for all wavelengths. what evidence is there that this is true?
The speed of sound in air is approximately the same for all wavelengths.
Step by step Explanation :
The evidence that this is true is the following:
The speed of sound in air is approximately the same for all wavelengths. This is proved by the fact that a sound wave is an atmospheric disturbance that propagates as a longitudinal wave through the air, travelling as a pressure wave that causes areas of compression and rarefaction.
The speed of sound in air is constant and is determined by the average kinetic energy of the air molecules. This is why the speed of sound is the same for all wavelengths.
When the temperature of air is held constant, the speed of sound in air is constant. This is the primary reason why the speed of sound in air is practically constant at a given temperature.
The wavelengths of sound range from about 17 meters for the lowest audible frequency (about 20 Hz) to about 17 millimeters for the highest audible frequency (about 20,000 Hz).
The speed of sound in dry air at room temperature is around 343 meters per second, but it may vary depending on a variety of factors, including humidity, temperature, and pressure.
Learn more about Speed, Sound, Wavelengths at https://brainly.com/question/16396485
#SPJ11
when a knowledgeable amateur astronomer tells you that she has a 14-inch telescope, what does the number 14 refer to?
When a knowledgeable amateur astronomer tells you that she has a 14-inch telescope, the number 14 refers to the diameter of the telescope’s objective lens.
A telescope is a device used to view distant objects by utilizing electromagnetic radiation to either magnify their apparent size or gather more light than the human eye can. Telescopes are used for scientific, commercial, and amateur purposes. The telescope comprises an objective lens or mirror and an eyepiece to magnify the images created by the objective. Most telescopes have a viewfinder to make it simpler to aim the telescope precisely at the object of interest. They may also have a motorized mount to track celestial objects as they move across the sky.
Telescopes come in a variety of sizes, designs, and shapes and they range from large observatory telescopes to handheld amateur models. They are often classified into two types, reflecting and refracting telescopes and the size of a telescope is determined by the diameter of its objective lens or mirror. The bigger the diameter, the more light the telescope can collect, and the clearer the image. The diameter of the objective is the most significant aspect of a telescope when it comes to observing the heavens. For instance, a 14-inch telescope has an objective lens with a diameter of 14 inches, this large lens is capable of collecting a lot of light and providing clear images, making it a perfect tool for viewing the night sky.
Learn more about telescope at:
https://brainly.com/question/3841719
#SPJ11
true or false: energy is the capacity to do work and work is anything that involves moving matter against an opposing force.
The given statement "Energy is the capacity to do work and work is anything that involves moving matter against an opposing force" is TRUE. Energy is the capacity to do work, which is defined as any action that requires the application of a force to move matter. This includes tasks such as lifting a book, pushing a door open, or running.
Energy refers to the capacity of a physical system to perform work. Energy is generally used to complete tasks, such as moving an object from one location to another, heating up or cooling down a material, or lighting up a room. Work is defined as the transfer of energy to an object via a force applied to the object over a given distance, as per the statement. Work is usually identified as the displacement of an object through a force applied to it in the direction of its displacement against an opposing force.Energy and work are two distinct but interrelated concepts in physics. Energy is the capacity to perform work, and work is the transfer of energy from one object to another through a force acting over a distance. Energy and work are both expressed in joules (J), the unit of energy in the International System of Units (SI).
For more details on energy, click on below link:
https://brainly.com/question/17290830
#SPJ11
Which traits are controlled by polygenic inheritance? Select four options.
red hair
hazel eyes
blood type
length of corn ears
birth weight
fur color of palomino horses
Answer:
All options except fur color of palomino horses and blood type
Answer:
A, B, D, and E
Explanation:
on a day when there is no wind, you are moving toward a stationary source of sound waves. compared to what you would hear if you were not moving, the sound that you hear has
The sound that you hear has a higher frequency and a shorter wavelength.
When you move towards a stationary source of sound waves, the wavelength is shortened and the frequency is increased. This is due to the Doppler Effect, which states that a wave's frequency increases as the source and observer come closer together.
The Doppler effect is a phenomenon when there is a change in the frequency of the wave due to a displacement of the source and detector/listener.
In summary, when you move towards a stationary source of sound waves, the sound you hear has a higher frequency and a shorter wavelength.
Learn more about Doppler Effect at https://brainly.com/question/1330077
#SPJ11
discuss how errors due to earth curvature and refraction can be eliminated from the differential leveling process.
Errors due to earth curvature and refraction can be eliminated from the differential leveling process by using the trigonometric leveling method.
This method utilizes the principle of triangles to determine the height difference between two points on the Earth's surface.
The trigonometric method begins by measuring the horizontal angle between two points, then the vertical angle between the same two points, and finally the distance between the points.
The trigonometric method is not affected by the curvature of the Earth or refraction since the vertical angle is measured at a given distance instead of the line of sight.
Therefore, the measurements of the angles and distances remain unaffected.
The trigonometric leveling process is as follows: first, an instrument is set up at point A. A second instrument is then set up at point B, and both instruments are leveled.
The horizontal angle between the two points is then measured with a theodolite, followed by the vertical angle. Lastly, the distance between the two points is measured using a tape measure.
After all the measurements are taken, the results are then used in a trigonometric formula to calculate the difference in elevation between the two points.
This method eliminates errors due to refraction or the Earth's curvature, since the elevation difference is not determined by the line of sight, but rather by the measured angles and distance.
The trigonometric leveling method is the best method to eliminate errors due to the Earth's curvature and refraction from the differential leveling process.
This method uses trigonometric principles and measurements to accurately calculate the difference in elevation between two points.
to know more about refraction refer here:
https://brainly.com/question/14760207#
#SPJ11
a record turntable is rotating at 33 1 3 rev/min. a watermelon seed is on the turntable 7.3 cm from the axis of rotation. (a) calculate the acceleration of the seed, assuming that it does not slip. (enter the magnitude.)
Assuming that it does not slip, the acceleration of the seed is 0.89 m/s².
The acceleration of the seed can be calculated using the formula for centripetal acceleration:
a = (v²) / r
where a is the centripetal acceleration, v is the velocity of the seed, and r is the distance from the axis of rotation to the seed.
To use this formula, we need to first convert the rotational speed of the turntable from rev/min to radians per second. There are 2π radians in one revolution, so:
ω = (33 1/3 rev/min)(2π rad/rev)(1 min/60 s) = 3.49 rad/s
The velocity of the seed can be calculated from the tangential velocity formula:
v = rω
where v is the tangential velocity of the seed.
Substituting the given values, we get:
v = (0.073 m)(3.49 rad/s) = 0.255 m/s
Now we can use the formula for centripetal acceleration:
a = (v²) / r
Substituting the values we have calculated, we get:
a = (0.255 m/s)² / 0.073 m = 0.89 m/s²
Therefore, the acceleration of the seed is 0.89 m/s² assuming that it does not slip.
Learn more about centripetal acceleration here: https://brainly.com/question/79801.
#SPJ11
which is the correct unit to represent time?
d) 7m
b) 7m/h
c) 7 s
A wheel of radius R starts from rest and accelerates with a constant angular acceleration α about a fixed axis.
At what time t will the centripetal and tangential accelerations of a point on the rim have the same magnitude?
Express your answer in terms of the given quantities.
The time at which the centripetal and tangential accelerations of a point on the rim have the same magnitude is given by t = √(R/α).
StepsA tangential = R, where R is the wheel's radius and is the angular acceleration, gives the tangential acceleration of a point on the rim of the wheel.
A centripetal = v²/R, where v is the speed of the point, gives the centripetal acceleration of a point on the rim of the wheel.
At time t, the wheel's angular displacement is given by = (1/2)t2, and the speed of the point on the rim is given by v = R, where is the wheel's angular velocity.
Setting the magnitudes of the tangential and centripetal accelerations equal, we have:
Rα = v²/R
Substituting v = Rω and simplifying, we get:
Rα = Rω²
α = ω²
Using the definition of angular velocity ω = αt, we get:
t = √(R/α)
Therefore, the time at which the centripetal and tangential accelerations of a point on the rim have the same magnitude is given by t = √(R/α).
learn more about acceleration here
https://brainly.com/question/26408808
#SPJ1
how long must a 0.70- mm -diameter aluminum wire be to have a 0.42 a current when connected to the terminals of a 1.5 v flashlight battery?
To determine the length of an aluminum wire required to carry a certain current, one must use the formula: r = (ρL) / (πr²), where r is the radius of the wire, ρ is the resistivity of the wire, and L is the length of the wire is 48.54 m.
What is the length of the wire?A 0.70 mm diameter aluminum wire has a radius of 0.35 mm or 0.00035 m. The resistivity of aluminum is 2.82 × 10⁻⁸Ωm. The formula for current is:
I = V / R
where, V is voltage, and R is resistance. We can rearrange this to:
R = V / I
Plugging in the given values of 0.42 A and 1.5 V gives R = 3.571 Ω. The resistance of a wire is given by:
R = ρL / A
where, A is the cross-sectional area of the wire, and ρ is its resistivity.
We know the resistivity of aluminum and the radius of the wire, so we can calculate the cross-sectional area of the wire:
A = πr² = 3.1416 × (0.00035 m)² = 3.848 x 10⁻⁷ m². Substituting all the values in the formula for the resistance of the wire and solving for L gives:
L = RA / ρ = (3.571 Ω) × (3.848 x 10⁻⁷ m²) / (2.82 × 10⁻⁸ Ωm) = 48.54 m.
Therefore, the aluminum wire must be 48.54 m long to have a current of 0.42 A when connected to the terminals of a 1.5 V flashlight battery.
Read more about length here:
https://brainly.com/question/28322552
#SPJ11
turns people upside down. people should not drop down. this is due to: gravity. inertia. seat belts. centrifugal force.
The given statement "turns people upside down" and "people should not drop down" are both due to the centrifugal force.
What is Centrifugal Force?Centrifugal force is defined as the apparent force that tends to move a rotating body away from the center of rotation. When an object moves in a circular path, a force must act towards the center of the circle to keep it moving in a circle. This force is known as the centripetal force.
The opposite force that acts to push the object away from the center of the circle is called centrifugal force. So, the given statement "turns people upside down" and "people should not drop down" are both due to the centrifugal force.
Learn more about centrifugal force here:
https://brainly.com/question/17167298#
#SPJ11
6. object x of mass m travels toward object y of mass 2m in such a way that they collide. the table contains data about the velocities of object x and object y immediately before the collision and immediately after the collision. what are the change in momentum of the two-object system from immediately before the collision to immediately after the collision?
The change in momentum of the two-object system from immediately before the collision to immediately after the collision is m(v-V) + 2m(V-v).
The change in momentum of the two-object system from immediately before the collision to immediately after the collision can be determined using the following equation:
Change in Momentum = Final Momentum - Initial Momentum.
The initial momentum of object x is given by the formula: Mass x Velocity = mv, where m is the mass of object x and v is the velocity of object x immediately before the collision. The initial momentum of object y is given by 2mv, where 2m is the mass of object y and v is the velocity of object y immediately before the collision. The final momentum of object x is given by m(v-V) where m is the mass of object x, v is the velocity of object x immediately before the collision and V is the velocity of object x immediately after the collision. The final momentum of object y is given by 2m(V-v) where 2m is the mass of object y, V is the velocity of object y immediately after the collision and v is the velocity of object y immediately before the collision. The change in momentum = m(v-V) + 2m(V-v).Therefore, the change in momentum of the two-object system from immediately before the collision to immediately after the collision is given by m(v-V) + 2m(V-v).
To know more about change in momentum click here:
https://brainly.com/question/30157362
#SPJ11
A car with its hom sounding approaches a group of students. Assume the car's horn produces sound waves with
constant frequency. Which of the following statements best explains why the students hear a higher pitch as the ca
approaches than when it is stopped?
The sound waves incr
in sneed as the car approaches the students
The sound waves are heard at a higher frequency as the car approaches the students.
Seventh grade QQ.4 Commas with coordinate adjectives 5L5
Insert one comma to separate the coordinate adjectives.
Typical golf caddie responsibilities include carrying clubs, cleaning balls,
calculating distances and scores, and even replacing the divots-pieces of
grass and dirt that have been cut loose by the swift forceful strikes of golf
clubs.
Answer:
Typical golf caddie responsibilities include carrying clubs, cleaning balls,
calculating distances and scores, and even replacing the divots - pieces of
grass and dirt that have been cut loose by the swift, forceful strikes of golf
clubs.
Two crates are dropped from the same height in a vacuum. The mass and force of the crates are shown in the diagram. Which of the following statements is supported by the data?
The momentum of both crates will be the same right before they hit the ground.
The normal force will be the same on both crates when they hit the ground.
Both of the crates are accelerating at the same rate.
Both of the crates are falling at a constant speed.
The statement that is supported by the data is that both of the crates are accelerating at the same rate. That is option C.
What is acceleration?Acceleration is defined as the quantity that measures the rate of change of velocity of a moving object.
According to Newton's second law, the force (F) acting on an object is equal to the mass (m) of object times its acceleration (a).
That is F = ma
For the first crate = a = 686/70 = 9.8 m/s²
Fro the second crate = 490/50 = 9.8 m/s²
Therefore, Both of the crates are accelerating at the same rate.
Learn more about mass here:
https://brainly.com/question/28409714
#SPJ1
the reason distance has a greater effect on the force of gravity between our earth and moon is because the distance between them is
The reason distance has a greater effect on the force of gravity between our Earth and Moon is because the distance between them is relatively large.
The reason distance has a greater effect on the force of gravity between the Earth and the Moon is because the force of gravity between two objects decreases with the square of the distance between them. This is known as the inverse square law of gravity.
The force of gravity between two objects is proportional to the product of their masses, and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as,
F = G * (m1 * m2) / r^2
where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.
In the case of the Earth and the Moon, their masses are fixed, so the only variable that affects the force of gravity between them is the distance. As the distance between the Earth and the Moon increases, the force of gravity between them decreases rapidly, according to the inverse square law.
To know more about moon, here
brainly.com/question/2337043
#SPJ4
--The complete question is, Fill in the blank, the reason distance has a greater effect on the force of gravity between our earth and moon is because the distance between them is ________________.--
an asteroid exerts a 360-n gravitational force on a nearby spacecraft. if the spacecraft moves to a position three times as far from the center of the asteroid, the force will be
The force between the asteroid and the spacecraft will be 40 N when the spacecraft moves to a position three times as far from the center of the asteroid.
The gravitational force between two objects of masses m1 and m2 separated by a distance r is given by the formula:
F = G(m₁m₂) / r²
where G is the gravitational constant.
In this problem, the asteroid exerts a gravitational force of 360 N on the spacecraft when they are at a certain distance r from each other. When the spacecraft moves to a position three times as far from the center of the asteroid, its distance from the asteroid will be 3r. To calculate the new force between them, we can use the same formula and plug in the new distance:
F' = G(m1m2) / (3r)^2
F' = G(m1m2) / 9r^2
Since the masses of the asteroid and spacecraft are constant, we can divide the second equation by the first to find the ratio of the new force to the original force:
F' / F = (G(m₁m₂) / r²) / 9r²) / (G(m₁m₂) / r²)
F' / F = (1 / 9)
F' = (1 / 9) * F
F' = (1 / 9) * 360 N
F' = 40 N
Therefore, the force will be 40 N.
Learn more about The Force: https://brainly.com/question/30526425
#SPJ11
Need help with this (Homework)
Answer:
1. goes to B.
2. goes to D.
3. goes to A.
4. goes to C.
I had to do this in 8th grade so if im wrong sorry.
If im right please mark me brainliest
what is the approimate electrostatic force between two protons seperated bvy a distance of 1.0x10^-6
The electrostatic force between two protons separated by a distance of 1.0 × 10^-6 m is 2.3 × 10^-8 N.
Electrostatic force is the force between two electrically charged objects. This force can either be attractive or repulsive.
It is proportional to the product of the two charges and inversely proportional to the square of the distance between them.
The force is defined by Coulomb's law which states that:
The electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
The formula for Coulomb's law is given as:F = kq1q2/r2
WhereF is the electrostatic forcek is Coulomb's constantq1 and q2 are the charges of the two particles is the distance between the two particles in meters.
The value of Coulomb's constant is 9.0 × 10^9 Nm^2/C^2.Let's consider two protons separated by a distance of 1.0 × 10^-6 m. The charge on each proton is +1.6 × 10^-19 C.
F = kq1q2/r2F = (9.0 × 10^9 Nm^2/C^2)(+1.6 × 10^-19 C)(+1.6 × 10^-19 C)/(1.0 × 10^-6 m)^2F = 2.3 × 10^-8 N
To know more about electrostatic force refer here:
https://brainly.com/question/9774180#
#SPJ11
the photo at right was taken through a specroscope. what color was the pigment extract used to produce this spectrum? what colo(s) did this extract absorb?
Light is a form of energy. All the properties of light can be explained by Considering the Wave length and lespuscutar theory.
The Wave Theory states that waves are how light moves across space. When Visible light is passed through a prim it is split up into seven colours which corresponds to definite wave length. a phenomenon Called dispersion. The study of interaction between matter and electromagnetic radiation is defined as spectroscopy.
A spectrophotometer is a device which detect the percentage transmittance of light radiation. When light of certain intensity and frequency range is passed through the Sample Thus the instrument Compare the intensity of the transmitted light with that of the incident light.
A spectroscope is a device that divides light into its individual wavelengths to produce a spectrum.
Learn more about Light here:
https://brainly.com/question/7439081
#SPJ1
what is the wavelength of the peak of the blackbody radiation curve for the human body (t5 310 k)? what type of em wave is this?
The peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is approximately 9.7 micrometers and the type of electromagnetic wave is infrared radiation. Infrared radiation is part of the electromagnetic spectrum and is often referred to as the "heat" radiation because it is emitted by objects that are slightly warmer than room temperature.
The wavelength of infrared radiation is typically in the range of 0.75 micrometers to 1000 micrometers. The peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is the longest wavelength of radiation emitted by the body.
In order to determine the peak wavelength, the Stefan-Boltzmann Law must be applied. This law states that the total amount of energy emitted by a blackbody per unit area is proportional to the fourth power of its absolute temperature. By rearranging the equation, we can calculate the peak wavelength, which is then equal to 2.89 * 10^-3 m * (T^-1/4). Since the temperature is 310 K, the peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is approximately 9.7 micrometers.
The type of electromagnetic wave emitted by the human body at a temperature of 310 K is infrared radiation. Infrared radiation is part of the electromagnetic spectrum and has a wavelength in the range of 0.75 micrometers to 1000 micrometers. Infrared radiation is often referred to as the "heat" radiation because it is emitted by objects that are slightly warmer than room temperature.
for such more question on wavelength
https://brainly.com/question/10728818
#SPJ11
Give examples of motion in which the directions of the velocity and acceleration vectors are the following. (a) opposite - a car moving along a straight road while speeding up - a particle moving around a circular track at constant speed - a car moving along a straight road while braking (b) the same - a car moving along a straight road while braking - a particle moving around a circular track at constant speed - A car moving along a straight road while speeding up (c) mutually perpendicular - a car moving along a straight road while speeding up - a car moving along a straight road while braking - A particle moving around a circular track at constant speed
(a) When the velocity and acceleration vectors are opposite, the object is slowing down while moving in the same direction. An example of this is a car moving along a straight road while braking. Another example is when a particle is moving around a circular track at a constant speed but changing direction.
The velocity vector is always tangent to the track while the acceleration vector points towards the center of the circle. Also, a car moving along a straight road while speeding up has a velocity vector in the direction of motion and an acceleration vector in the opposite direction, which is opposite to the direction of the velocity.
(b) When the velocity and acceleration vectors are in the same direction, the object is speeding up in the direction of motion. An example of this is a car moving along a straight road while speeding up. Also, a particle moving around a circular track at a constant speed has a velocity vector that is tangent to the track, and its acceleration vector points towards the center of the circle.
(c) When the velocity and acceleration vectors are mutually perpendicular, the object is changing direction, but not changing its speed. An example of this is a particle moving around a circular track at a constant speed, where the velocity vector is tangent to the track and the acceleration vector points towards the center of the circle.
Additionally, a car moving along a straight road while speeding up or braking has a velocity vector in the direction of motion or opposite to the direction of motion, respectively, and an acceleration vector perpendicular to the velocity vector.
For more details about vector click here:
https://brainly.com/question/29740341#
#SPJ11
The formula for speed is Total Distance / Total Time. Based on the data table below, what is the
average speed after 2 minutes? Please show all calculations.
Time (min.) Distance (m)
0
1
2
3
0
50
75
90
Answer:
To find the average speed after 2 minutes, we need to calculate the total distance covered in 2 minutes and divide it by 2.
Total Distance after 2 minutes = 75m
Total Time after 2 minutes = 2 minutes
Average Speed after 2 minutes = Total Distance / Total Time
Average Speed after 2 minutes = 75m / 2 min = 37.5 m/min
Therefore, the average speed after 2 minutes is 37.5 m/min.
I Hope This Helps!
what is the equation to find the equivalent resistance, req, of two resistors in series, r1 and r2? group of answer choices
The equivalent resistance of resistors in series is always greater than the individual resistances. This is because the total resistance of the circuit is the sum of the resistances, and therefore the electric current has to overcome more resistance to flow through the circuit as compared to when a single resistor is used.
To find the equivalent resistance, req, of two resistors in series, r1 and r2, the following equation is used:
Req = R1 + R2
Where Req is the equivalent resistance of the series circuit,
R1 is the resistance of the first resistor,
R2 is the resistance of the second resistor.
Resistors in a circuit are the components that oppose the flow of electric current. When two resistors are connected in series, they are connected end to end so that the electric current flows through one resistor before flowing through the second one.In a series circuit, the equivalent resistance, req, is calculated as the sum of the individual resistances of the resistors connected in series.
Therefore, to find the equivalent resistance of two resistors in series, R1 and R2, we add the resistance values of the two resistors, as shown in the formula above.
for such more question on equivalent resistance
https://brainly.com/question/1851488
#SPJ11
a constant force is applied to an object, causing the object to accelerate at 7.50 m/s2 . what will the acceleration be if the force is doubled and the object's mass is halved?
The acceleration be if the force is doubled and the object's mass is halved when a constant force is applied to an object, causing the object to accelerate at 7.50 m/s² is 30.00 m/s².
Therefore Newton's Second Law of Motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. It can be expressed mathematically as follows:
[tex]F=ma[/tex]
where F is the force applied to the object,
m is its mass, and
a is its acceleration.
Given that the initial force on the object causes an acceleration of 7.50 m/s²,
we can write it as
[tex]F = m*a_{1}[/tex]
where F1 is the initial force applied,
[tex]a_{1}[/tex] is the initial acceleration, and
m is the mass of the object.
We can rearrange the terms and write it as
[tex]\frac{F}{m}=a_{1}[/tex]
[tex]\frac{F}{m}=7.50[/tex] m/s²
Now, if the force is doubled and the mass is halved, the equation becomes:
[tex]2F = \frac{1}{2}m[/tex]
where 2F is the new force,
[tex]a_{2}[/tex] is the new acceleration, and
[tex]\frac{1}{2}m[/tex] is the new mass.
We can also write above equation as
[tex](\frac{4F}{m})=a_{2}[/tex]
Substituting the value of [tex]\frac{F}{m}[/tex] as 7.50 m/s²
Simplifying this equation, we can solve for a₂:
[tex]a_{2}=4*a_{1}[/tex]
[tex]a_{2}=4*7.50[/tex]
[tex]a_{2}=30.00[/tex] m/s²
Therefore, if the force is doubled and the object's mass is halved, the acceleration of the object will be four times the initial acceleration, or 30.00 m/s².
To understand more about acceleration:
https://brainly.com/question/460763
#SPJ11
the words on the pages of a textbook and the wave of a hand your friend makes when she sees you on the street are both examples of .
The words on the pages of a textbook and the wave of a hand your friend makes when she sees you on the street are both examples of physical phenomena.
The words on the pages of a textbook and the wave of a hand your friend makes when she sees you on the street are both examples of physical phenomena. Physical phenomena are observable events or occurrences that can be described using the scientific method. These phenomena can be observed using our senses, such as sight, touch, sound, taste, and smell, or measured using instruments, such as thermometers, scales, or cameras. For example, the wave of a hand is a physical phenomenon because it is an observable event that can be seen and measured. Similarly, the words on the pages of a textbook are physical phenomena because they are observable and can be seen and read.
For more questions related to physical phenomena.
https://brainly.com/question/30827263
#SPJ11
how much water should be taken up by a plant when the air around it is completely saturated with water - 100 percent humidity.
The amount of water that a plant should take up when the air around it is completely saturated with water, i.e. 100 percent humidity, is the maximum amount of water the plant is capable of taking up from the environment. This is because there is no water left in the air for the plant to absorb.
What is humidity?Humidity refers to the amount of moisture present in the air. The humidity in the air is an important factor for the growth of plants. Humidity refers to the amount of moisture present in the air. The humidity in the air is an important factor for the growth of plants. In addition, the amount of water vapor present in the air determines how much water a plant can take up. As a result, humidity can play an important role in plant water uptake.
When the air around the plant is completely saturated with water, it means that the air has reached its maximum capacity for water vapor. The relative humidity, in this case, is 100%. When the air is completely saturated with water, it becomes difficult for the plant to take up any more water from the environment, as there is no water left in the air to absorb.
Therefore, the amount of water that a plant can take up is limited by the amount of water vapor present in the air.
Read more about water :
https://brainly.com/question/1313076
#SPJ11
in august of 2006, the iau (international astronomical union) published an official definition what it means to be a planet. what criteria is needed for that classification? why is pluto no longer considered a full fledged planet?
In August of 2006, the International Astronomical Union (IAU) published an official definition of what it means to be a planet.
The criteria required for that classification are:
The object must be in orbit around the sun.The object must be spherical or nearly spherical.The object must have cleared the neighborhood around its orbit.Pluto is no longer considered a full-fledged planet because it has not satisfied the third condition mentioned above. According to the IAU, Pluto has not cleared the neighborhood around its orbit.
That is, Pluto shares its orbit with numerous other objects in the Kuiper Belt region and therefore does not have a clear path around the sun. This led to the IAU redefining Pluto as a dwarf planet in 2006, which means that it is still classified as a planet but is no longer considered a full-fledged planet.
For more question on International Astronomical Union click on
https://brainly.com/question/13015020
#SPJ11
discuss the shape of the voltage and current waveforms. which appears more sinusoidal and why would you expect it to be that way?
The voltage waveform is more sinusoidal than the current waveform.
This is because the voltage source is assumed to be an ideal source, which means that the voltage is supplied without loss or fluctuation while the current waveform is distorted due to the loads present in the circuit. When a voltage waveform is applied to a circuit with inductance and capacitance, the resulting current waveform will be distorted and will not be sinusoidal. The current waveform is affected by the presence of capacitance and inductance in the circuit, which cause the current to lag behind the voltage. The current waveform becomes more distorted as the load resistance increases.
More on voltage and current waveform: https://brainly.com/question/30054547
#SPJ11
if two flutists play their instruments together at the same intensity, is the sound twice as loud as that of either flutist playing alone at that intensity? why or why not?
No, the sound wouldn't be twice as loud as that of either flutist playing alone at that intensity. The increase in sound intensity would be less than twice as loud.
This is because when two sound waves coincide, the amplitude of the resulting sound wave is the sum of the amplitudes of the individual sound waves. That is, when two identical sound waves come together, they create a new sound wave that is slightly louder than the original sound wave, but not twice as loud.
Furthermore, sound intensity is affected by the distance from the sound source, and when two flutists are playing together, the sound waves produced have to travel further before they reach the listener, thus reducing the intensity of the sound.
Know more about flutist here
https://brainly.com/question/2386102#
#SPJ11