A force of 245 N must be applied vertically to lift the bag off the baggage cart.
The force that must be applied vertically to lift a bag off a baggage cart, given that the bag has a mass of 25 kg, can be determined using the formula F = m*g
where F is force, m is mass, and g is acceleration due to gravity. The value of g is 9.8 m/s².So, F = 25 kg x 9.8 m/s² = 245 N. Therefore, a force of 245 N must be applied vertically to lift the bag off the baggage cart.
The mass of the bag = 25 kg.The formula used is, F = m*gwhereF = Force required to lift the bagm = Mass of the bagg = Acceleration due to gravityF = 25 kg x 9.8 m/s² = 245 N.
Therefore, a force of 245 N must be applied vertically to lift the bag off the baggage cart.
to know more about Force refer here:
https://brainly.com/question/13191643#
#SPJ11
measurements show a certain star has a very high luminosity (100,000 x the sun's) while its temperature is quite cool (3500 k). how can this be?
The star might be quite large in size, with a much larger surface area than the sun. This would increase its luminosity despite its cooler temperature.
The star has a high luminosity (100,000 x the sun's) and a cool temperature (3500 K) because of its size.
A star's luminosity is proportional to its size, so if a star is very large, it can have a high luminosity even if it is relatively cool.
Another possibility is that the star is in a phase of its life cycle where it has expanded and cooled, such as a red giant or supergiant, but still retains a high luminosity due to its large size.
These stars have relatively low surface temperatures, but their large sizes give them very high luminosities.
Therefore, this star is likely very large and thus has a very high luminosity despite its low temperature.
Learn more about Luminosity and temperature here:
brainly.com/question/31014896
#SPJ11
the maximum horizontal distance from the center of the robot base to the end of its end effector is known as .
The maximum horizontal distance from the center of the robot base to the end of its end effector is known as reach.
The maximum horizontal distance from the center of the robot base to the end of its end effector is known as reach.
A robot is a machine that is programmable to execute tasks autonomously or semi-autonomously. Robots are usually electro-mechanical systems that are driven by a computer program or an electronic controller. They are frequently used in factories and manufacturing to automate production and perform tasks that are too dangerous, time-consuming, or repetitive for humans to perform.
Robotics is a branch of technology that deals with the design, construction, operation, and application of robots. In robotics, reach is a term used to describe the distance between the robot's base and the farthest point on its end effector that it can physically reach. It is usually given in three dimensions:
horizontal reach, vertical reach, and depth reach. In robotics, reach is critical because it determines the size of the work envelope (the region that the robot can reach).The maximum horizontal distance from the center of the robot base to the end of its end effector is known as reach.
For more such questions on robot , Visit:
https://brainly.com/question/28458027
#SPJ11
what is the distance between your eye and the image of the butterfly in the mirror? explain your answer.
The distance between your eye and the image of the butterfly in the mirror is: the same as the distance between your eye and the actual butterfly
The distance between your eye and the image of the butterfly in the mirror is the same as the distance between your eye and the actual butterfly, which is the sum of the distance from your eye to the mirror and the distance from the mirror to the butterfly.
To calculate this, we need to measure the distance from your eye to the mirror, which can be done using a ruler or tape measure, and then measure the distance from the mirror to the butterfly, which can be done using a ruler or tape measure as well. Once we have these two measurements, we can simply add them together to get the total distance between your eye and the image of the butterfly in the mirror.
To clarify further, let's use an example. If your eye is 10 cm away from the mirror and the butterfly is 30 cm away from the mirror, then the total distance between your eye and the image of the butterfly in the mirror is 40 cm. This is because 10 cm (from your eye to the mirror) + 30 cm (from the mirror to the butterfly) = 40 cm.
To know more about distance refer here:
https://brainly.com/question/15172156#
#SPJ11
an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2. after 5 seconds, the object will have a speed of
Answer : If an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2 then after 5 seconds, the object will have a speed of 100 m/s
This can be calculated using the equation v = a*t, where v is the velocity, a is the acceleration due to gravity, and t is the time elapsed. Therefore, in this case, v = 20 m/s2 * 5 s = 100 m/s. These values are given in question, so we just have to put them in equation.
Since the object is falling freely, its acceleration remains constant and it follows a uniform acceleration motion. Therefore, the velocity of the object will increase linearly with time. After 10 seconds, the velocity will double to 200 m/s, and so on.
Know more about gravity here:
https://brainly.com/question/14874038
#SPJ11
question 3 (3 points) a horizontal wire carries a large current. a second wire carrying a current in the same direction is suspended below it. can the current in the upper wire hold the lower wire in suspension against gravity? justify your answer.
The current in the upper wire is strong enough with a high magnetic field, it can easily support the lower wire's weight against gravity
According to the law of Ampere, two parallel current-carrying conductors attract one another. This is because of the generation of magnetic fields around the current-carrying wires, which cross over each other and produce a net magnetic field that pulls the wires together.
Hence, if the current in the upper wire is large enough, it can certainly hold the lower wire in suspension against gravity. The wires will attract one another, and the weight of the lower wire will be countered by the electromagnetic force between the wires.
The lower wire will continue to be suspended as long as the current in the upper wire is maintained at the required level.
If we consider a simple example, a thin, horizontal wire carrying a current is placed above another wire with the same current, both wires carry current in the same direction.
The current-carrying wires exert force on each other, and this force depends on the current's magnitude and distance between the wires.
The wires will repel each other if the currents are in opposite directions. If they are in the same direction, the wires will attract each other. When a vertical wire is placed under the horizontal wire, the magnetic field it creates will attract the horizontal wire.
For similiar question on magnetic field
https://brainly.com/question/26257705
#SPJ11
which block does uranium belong to? select the correct answer below: s block p block d block f block
Uranium belongs to the f-block of the periodic table. The correct option is fourth.
The f-block is located at the bottom of the periodic table, and it consists of the lanthanide and actinide series. Uranium is an actinide element, which means it is part of the second row of the f-block. It is widely used in nuclear power plants, as well as in nuclear weapons.
The f-block elements are known for their unique electron configurations, which include partially filled f-orbitals. These elements are also called "inner transition metals" because they fill their d-orbitals before filling their f-orbitals. Uranium is a radioactive metal that has 92 protons in its nucleus.
In summary, uranium belongs to the f-block of the periodic table, specifically the actinide series.
To learn more about Periodic Table, refer here:
brainly.com/question/29367588#
#SPJ11
if we say that the potential at the earth's surface is 0 v , what is the potential 1.6 km above the surface?
If we say that the potential at the earth's surface is 0 v , the potential 1.6 km above the surface is - 6.2 × 10^6 V.
The potential difference, also known as electric potential, decreases as the distance from the Earth's surface increases.
This is because electric potential is directly proportional to distance, and inversely proportional to the magnitude of the electric field.
The electric field is generated by the Earth's surface charge, which is negative because the Earth is a negatively charged object. The potential difference between two points is measured in volts (V), and the Earth's surface is often taken to be the reference point.
If the potential at the Earth's surface is taken to be 0 V, the potential 1.6 km above the surface can be calculated as follows:
The electric field generated by the Earth's surface charge is given by: E = kq/r²,
where k is Coulomb's constant, q is the surface charge of the Earth, and r is the distance from the center of the Earth.
The potential difference between two points is given by: V = Ed,
where d is the distance between the two points.
Thus, the potential at a point 1.6 km above the Earth's surface is:
V = E × d = kq/r² × d = (9 × 10^9 N·m²/C²) × (- 5.52 × 10^5 C)/[(6.38 × 10^6 m + 1.6 × 10^3 m)²] × (1.6 × 10^3 m)
= - 6.2 × 10^6 V.
To learn more about electric potential:
https://brainly.com/question/12645463#
#SPJ11
if 22.5L of nitrogen at 748 mm Hg are compressed to 725 mm hg at constant temperature what is the new volume?
The new volume is approximately 23.16 L when the nitrogen gas is compressed from 748 mmHg to 725 mmHg at constant temperature.
Use the combined gas law to determine the relationship between a gas's pressure, volume, and temperature:
P1V1/T1 = P2V2/T2
where the gas's starting pressure, volume, and temperature are P1, V1, and T1, and its ultimate pressure, volume, and temperature are P2, V2, and T2.
The equation may be made simpler by saying: since the temperature is constant.
P1V1 = P2V2
Substituting the given values, we get:
725 mmHg × V2 = 748 mmHg × 22.5 L
Solving for V2, we get:
V2 = (748 mmHg × 22.5 L) / 725 mmHg
V2 = 23.16 L
A gas law known as the combined gas law connects a gas's pressure (P), volume (V), and temperature (T). It combines Boyle's law, Charles' law, and Gay-law, Lussac's three additional gas laws.
Learn more about Volume here:
https://brainly.com/question/18090062
#SPJ1
g a research rocket is launched from boulder straight towards the south. how would the coriolis effect change the path of the rocket?
For a rocket launched southward from Boulder, the Coriolis effect would cause it to drift to the east, leading to a curved flight path rather than a straight one.
The Coriolis effect is an important force to consider when launching a research rocket from Boulder. The Coriolis effect is the result of Earth's rotation and will cause any object moving along the surface of the Earth to veer to the right in the Northern hemisphere and to the left in the Southern hemisphere.
This effect is most noticeable for objects traveling long distances, such as a rocket. As it continues to fly south, the Coriolis force will continue to act upon it, increasing the curvature of its path. The magnitude of the Coriolis force depends on the speed of the object and its distance from the poles. Therefore, the more time the rocket has to travel, the more it will be deflected from its intended path.
The Coriolis effect is an important factor to consider for any research rocket launch. It has the potential to affect the accuracy and success of the mission and must be taken into account when planning a launch trajectory.
For more such questions on Coriolis effect.
https://brainly.com/question/14290551#
#SPJ11
Complete Question:
A research rocket is launched from Boulder straight towards the south. How would the Coriolis effect change the path of the rocket?
a baseball has a mass of 145 g. a pitcher throws the baseball so that it accelerates at a rate of 80 m/s2. how much force did the pitcher apply to the baseball?(1 point)
The amount of force that the pitcher applies to the baseball is 11.6N.
How to calculate force?Force is a physical quantity that denotes ability to push, pull, twist or accelerate a body. It can be calculated by multiplying the mass of the object by its acceleration as follows;
Force = mass × acceleration
According to this question, a baseball has a mass of 145 g. A pitcher throws the baseball so that it accelerates at a rate of 80 m/s². The force applied on the baseball can be calculated as follows:
Force = 145/1000 kg × 80m/s²
Force = 11.6N
Learn more about force at: https://brainly.com/question/25116504
#SPJ1
3. Ryder hits a tennis ball 2. 0 m from the ground. The initial velocity is directed horizontally and is 17. 2 m/s. The ball hits the ground 11. 0 m away from the player after passing over a 1. 0 m high net that is 6. 0 m horizontally from the player. 2K,1C
4T,1C
How long does it take for the ball to reach the ground?
What was the magnitude of the final velocity of the ball?
The time it takes for the ball to reach the ground is 1.63 seconds.
The magnitude of the final velocity of the ball is 17.2 m/s.
To calculate this, we can use the equations of motion for horizontal motion with constant acceleration:
x = x0 + v0t + (1/2)at2
v2 = v02 + 2a(x - x0)
Here, x
is the initial velocity (17.2 m/s), x is the final distance (11.0 m), and a is the acceleration due to gravity (-9.8 m/s).
Substituting in the given values, we get:
11.0 m = 2.0 m + (17.2 m/s)(t) + (-9.8 m/s2)(t2)/2
(17.2 m/s)2 = (17.2 m/s)2 + 2(-9.8 m/s2)(11.0 m - 2.0 m)
Since the initial velocity was directed horizontally, the magnitude of the final velocity is the same as the initial velocity (17.2 m/s).
For such more questions on initial velocity:
brainly.com/question/29110645
#SPJ11
masswhat is the relationship between energy in joules versus ev. if you have a proton at 10 mev, how fast is it going?
The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. So, the speed of the proton at 10 MeV is 6.46 × 10⁸ m/s.
Relationship between energy in joules versus eV. The relationship between energy in joules and electron volts (eV) is defined by the conversion factor 1 eV = 1.6 × 10⁻¹⁹ joules. This factor is used to convert energy measurements from one unit to the other. If a proton has an energy of 10 MeV, we can use this conversion factor to determine its energy in joules.10 MeV = 10 × 10⁶ eV = 1.6 × 10⁻¹⁹ J/eV × 10 × 10⁶ eV = 1.6 × 10⁻¹³ J. Speed of a proton at 10 MeV.
The speed of a proton at 10 MeV can be calculated using the relativistic equation: E² = (mc²)² + (pc)², where E is the energy of the proton, m is its mass, c is the speed of light, and p is the momentum of the proton. Let's assume that the mass of the proton is 1.67 × 10⁻²⁷ kg. Then, the momentum of the proton can be calculated as follows:p = √(E² - (mc²)²)/c = √((10 × 10⁶ eV)² - (1.67 × 10⁻²⁷ kg × (2.998 × 10⁸ m/s)²)²)/2.998 × 10⁸ m/s = 1.08 × 10⁻¹⁸ kg m/s. The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. Therefore, the answer is 10 MeV is 6.46 × 10⁸ m/s.
Learn more about proton : https://brainly.com/question/1805828
#SPJ11
As a particle moves 12 meters along an electric field of strength of 80 Newtons per Coulomb its electrical potential energy decreases by 5.2 x 10^-18 Joules.
What is the particle charge?
Giving out brainliest please help this is due today.
Answer:
The electric potential energy (EPE) of a particle with charge q moving through an electric field of strength E over a distance d is given by the formula:
EPE = qEd
In this problem, we are given:
EPE = 5.2 x 10^-18 J
E = 80 N/C
d = 12 m
Substituting these values into the formula, we get:
5.2 x 10^-18 J = q(80 N/C)(12 m)
q = 5.2 x 10^-18 J / (80 N/C)(12 m)
q = 6.875 x 10^-21 C
Therefore, the particle charge is 6.875 x 10^-21 Coulombs.
Explanation:
BRAINLIEST PLEASE!
4. if the electric field of an electromagnetic wave is oscillating along the z-axis and the magnetic field is oscillating along the x-axis, in what possible direction is the wave traveling?
The possible direction in which an electromagnetic wave is traveling if the electric field is oscillating along the z-axis and the magnetic field is oscillating along the x-axis is the y-axis.
An electromagnetic wave is composed of two mutually perpendicular fields that oscillate perpendicular to the direction of the wave's propagation. They are the electric field and the magnetic field. An electromagnetic wave is created when a charged particle is accelerated. These waves can travel through a vacuum or any medium, including air and water, at the speed of light.
In this scenario, the electric field of the wave oscillates along the z-axis, while the magnetic field oscillates along the x-axis. As a result, the wave's propagation direction must be perpendicular to both fields. As a result, the wave must be propagating along the y-axis.This is why it's critical to comprehend the interplay between electric and magnetic fields in the context of electromagnetic waves.
It's also critical to recognize that an electromagnetic wave's direction of propagation is always perpendicular to the oscillation directions of the two fields, which are mutually perpendicular to each other.
for such more question on electromagnetic wave
https://brainly.com/question/24319848
#SPJ11
the paper dielectric in a paper-and-foil capacitor is 8.10*10^-2 mm thick. it's dielectric constant is 2.10, and it's dielectric strength is 50.0 MV/m. assume that the geometry is that of a parallel-plate capacitor, with the metal foil serving as the plates.
Part A: What area of each plate is required for for a 0.300 uF capacitor? In m^2
Part B: If the electric field in the paper is not to exceed one-half the dielectric strength, what is the maximum potential difference that can be applied across the compactor? In V
a. Part A: The area of each plate is required for for a 0.300 uF capacitor is 1.56 × [tex]10^{-4}[/tex] m².
b. Part B: If the electric field in the paper is not to exceed one-half the dielectric strength, the maximum potential difference that can be applied across the compactor is 2025 V.
To find the area of each plate required for a 0.300 uF capacitor, use the formula:
C = ε₀εrA/d
where C is the capacitance, ε₀ is the vacuum permittivity (8.85 × [tex]10^{-12}[/tex] F/m), εr is the relative permittivity (dielectric constant), A is the area, and d is the distance between the plates. In this case,
C = 0.300 uF
εr = 2.10
d = 8.10 × [tex]10^{-5}[/tex] m.
Rearrange the formula to find A:
A = Cd / (ε₀εr)
A = (0.300 × [tex]10^{-6}[/tex] F)(8.10 × [tex]10^{-5}[/tex] m) / (8.85 × [tex]10^{-12}[/tex] F/m × 2.10)
A ≈ 1.56 × [tex]10^{-4}[/tex] m²
Thus, the area of each plate required for a 0.300 uF capacitor is approximately 1.56 × [tex]10^{-4}[/tex] m².
To find the maximum potential difference that can be applied across the capacitor, use the formula:
V = Ed
where E is the electric field and d is the distance between the plates. In this case, E is half the dielectric strength (50.0 MV/m / 2 = 25.0 MV/m), and d = 8.10 × [tex]10^{-5}[/tex] m:
V = (25.0 × 10^6 V/m)(8.10 × 10^-5 m)
V ≈ 2025 V
Thus, the maximum potential difference that can be applied across the capacitor without exceeding one-half the dielectric strength is approximately 2025 V.
To learn more about potential difference, click here:https://brainly.com/question/12198573
#SPJ11
how to know the minimum force a third vector should exert to bring the two other vectors to equilibrium
In order to determine the minimum force that a third vector should exert to bring two other vectors to equilibrium, we will use the concept of vector addition.
Here is some steps:
Draw two vectors (force) that are not in equilibrium, let's call them Vector A and Vector B.Draw a third vector (force) acting in the opposite direction to Vector A or Vector B.Measure the magnitude of Vector A and Vector B.To bring the two vectors to equilibrium, the third vector should have the same magnitude as Vector A + Vector B.This is because the third vector must be strong enough to cancel out the net force acting on the system. If the third vector has a magnitude less than Vector A + Vector B, then the system will not be in equilibrium.
For example, suppose Vector A has a magnitude of 5 N and Vector B has a magnitude of 3 N.
Then the minimum force that the third vector should exert to bring the two vectors to equilibrium would be
5 N + 3 N⇒8 N
To know more about the "force": https://brainly.in/question/23858054
#SPJ11
10. does the vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depend on the wave speed of the transverse wave?
The vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depends on both the wave speed and the amplitude of the transverse wave.
The transverse wave and wave speed for vertical speed of a segment also depends on factors like:
The wave speed of a transverse wave on a string is determined by the tension in the string and the mass per unit length of the string, as well as the properties of the medium through which the wave is propagating. This wave speed does not directly determine the vertical speed of a segment of the string.However, the amplitude of the transverse wave does affect the vertical speed of a segment of the string. The greater the amplitude of the wave, the greater the maximum vertical displacement of the string from its rest position, and thus the greater the vertical speed of a segment of the string at that point.The vertical speed (v) of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating can be expressed mathematically as: v = Aωcos(ωt)where 'A' is the amplitude of the transverse wave,
'ω' is the angular frequency of the wave,
't' is the time, and
'cos' is the cosine function.
The wave speed [tex](v_w)[/tex]of a transverse wave on a string is given by: [tex]v_w[/tex] = [tex]\sqrt{(T/u)[/tex]where 'T' is the tension in the string and
'u' is the mass per unit length of the string.
So while the wave speed does not directly determine the vertical speed of a segment of the string, it does affect the angular frequency of the wave (which is related to the wave speed) and thus indirectly affects the vertical speed of a segment of the string through the amplitude of the wave.
To learn more about the 'transverse wave':
https://brainly.com/question/2270715
#SPJ11
a 500g pot of water at room temperature (20c) is placed on a stove. how much heat is required to change this water to steam at 100c
To change 500g of water at room temperature (20°C) to steam at 100°C, you will need to add 1128.500 kJ of heat. This is because water requires a certain amount of heat energy, called the 'latent heat of vaporization', to turn from a liquid to a gas.
Mass of water (m) = 500g
Initial temperature ([tex]T_i[/tex]) = 20°C
Final temperature ([tex]T_f[/tex]) = 100°C
The heat of vaporization ([tex]H_{vap}[/tex]) = 2260 J/g.
To calculate the amount of heat required to convert 500 g of water at room temperature to steam at 100°C, we will use the formula:
[tex]Q = m \times H_{vap}\\Q = 500 g \times 2260 J/g\\Q = 1128500 J[/tex]
Therefore, it would take 1130000 J of heat to change this water to steam at 100°C.
For further detail on latent heat of vaporization, click on the below link:
https://brainly.com/question/30762921
#SPJ11
what is the speed acquired by a freely falling object 5 s after being dropped from a rest position? what is the speed 6 s after?
The speed acquired by the body is 49m/s and 59m/s respectively.
The speed can be calculated using the formula:
v= u + gt, where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.
The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.
The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.
In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.
To know more about speed, refer here:
https://brainly.com/question/17661499#
#SPJ11
calculate the horizontal component of the net force, in newtons, on the charge which lies at the lower left corner of the rectangle.
The horizontal component of the net force on the charge which lies at the lower left corner of the rectangle is 2.62 × 10⁻⁴ N.
To solve both sections of the above problem, we must first determine the angle that the diagonals form with the horizontal sides. This could be given as:
θ = [tex]tan^{-}( \frac{9}{28})[/tex] = 17.82°.
Horizontal component:
There is no force transfer from the upper left charge to the lower left charge. So, the negative charges on the right will be the only ones we focus on.
Using Coulomb's law, force due to lower right charge can be given as:
[tex]k\frac{q^{2} }{D^{2} } = (9 * 10^{9})\frac{35^{2} * 10^{-18} }{28^{2}*10^{-2} }[/tex] = 1.41 × 10⁻⁴N.
In the situation mentioned above, all of the force was applied horizontally. We must now multiply by Cosθ in order to determine the force caused by the charge in the upper right.
[tex]F = k\frac{Q^{2} }{D_{1}^{2}+ D_{2} ^{2} } = 9*10^{9} \frac{35^{2}*10^{-18} }{(28^{2} *100^{-2})+ (9^{2} *100^{-)2} }[/tex] Cos (17.82°)N = 1.21 × 10⁻⁴N.
Therefore, the total force is equivalent to 2.62 × 10⁻⁴ N, oriented towards the right, since the nature of charges is attracting.
To know more about the horizontal components, refer:
https://brainly.com/question/25705666
#SPJ4
Complete question is:
Four point charges of equal magnitude Q = 35 nC are placed on the corners of a rectangle of sides D1 = 28 cm and D2 = 9 cm. The charges on the left side of the rectangle are positive while the charges on the right side of the rectangle are negative. Use a coordinate system fixed to the bottom left hand charge, with positive directions as shown in the figure.
Calculate the horizontal component of the net force, in newtons, on the charge which lies at the lower left corner of the rectangle.
what principle states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced?
The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).
The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.
The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.
When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.
To know more about buoyant force refer here:
https://brainly.com/question/21990136#
#SPJ11
when the light ray enters the air from the water, will the refracted light ray bend further from or closer to the normal?
Yes, when a light ray enters from water to air, it will bend further from the normal. This phenomenon is known as refraction, and is caused by the difference in speed between light passing through the two different materials. The light ray will slow down when passing through water, so it will bend closer to the normal.
When a light ray enters the air from water, the light ray will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so when the light enters the air, it bends towards the normal. The amount of refraction is determined by the index of refraction of each material. Since the index of refraction of air is lower than the index of refraction of water, the light ray will bend closer to the normal.
To better understand this, imagine a light ray traveling from a denser material (like water) to a less dense material (like air). As the light ray enters the air, the speed of the light increases, causing it to bend closer to the normal. This is due to the law of refraction, which states that the angle of refraction is inversely proportional to the speed of the light ray. In summary, when a light ray enters the air from water, it will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so the light ray bends towards the normal. The amount of refraction is determined by the index of refraction of each material, with the lower index refraction material (air) resulting in the light ray bending closer to the normal.
For more questions related to refraction.
https://brainly.com/question/14760207
#SPJ11
the4-kgslenderbarisreleasedfromrestintheposition shown. determine its angular acceleration at that instant if (a) the surface is rough and the bar does not slip, and (b) the surface is smooth.
To determine the angular acceleration of the 4-kg slender bar released from rest in the position shown, we need to consider two cases:
(a) when the surface is rough and the bar does not slip, and
(b) when the surface is smooth.
(a) Rough surface (no slip):
1. Calculate the torque about the center of mass (CM). In this case, the only force causing the torque is gravity (mg), acting downward at the midpoint of the bar.
2. Calculate the moment of inertia (I) for the bar. Since it's a slender bar, I = (1/12) * mass * length^2.
3. Use Newton's second law for rotation:
Torque = I * angular acceleration (α). Solve for α.
(b) Smooth surface:
1. Calculate the torque about the point of contact (A) with the surface. In this case, the gravitational force (mg) acts downward at the midpoint of the bar and the frictional force (f) acts upward at point A.
2. Calculate the moment of inertia (I) for the bar about point A. Use the parallel axis theorem: I_A = I_CM + mass * distance^2.
3. Use Newton's second law for rotation:
Torque = I_A * angular acceleration (α). Solve for α.
By following these steps, you will be able to determine the angular acceleration of the 4-kg slender bar in both cases, when the surface is rough and when the surface is smooth.
To know more about Newton's Second Law here :
https://brainly.com/question/13447525
#SPJ11
a particle travels 17 times around a 15-cm radius circle in 30 seconds. what is the average speed (in m/s) of the particle?
The average speed of the particle is 4.7 calculated by dividing the total distance traveled by the time taken.
The particle's average speed in m/s is 4.7. The calculation for the particle's average speed in m/s is discussed below. Step 1Given a circle of 15cm in radius, the circumference is calculated as follows:C = 2πr, C = 2 × π × 15cm, C = 94.25cm.
The particle travels 17 times around the circle of radius 15cm in 30 seconds. Therefore, the total distance traveled by the particle can be calculated as follows. Total Distance = 17 × Circumference. Total Distance = 17 × 94.25cm. Total Distance = 1602.25cm. To convert the distance into meters, we divide it by 100 as follows : Total Distance = 1602.25cm = 16.0225m. Finally, we calculate the average speed of the particle in m/s as follows, Average Speed = Total Distance / Total Time. Average Speed = 16.0225m / 30s. Average Speed = 0.534m/s × 8.75 = 4.7. Therefore, the particle's average speed in m/s is 4.7.
Read more about speed:
https://brainly.com/question/13943409
#SPJ11
How many units of energy are consumed if one uses 10 litres of petrol
Depending on the formulation, gasoline's energy content can vary, but a standard approximation states that one liter of gasoline has around 34 megajoules (MJ) of energy in it.
As a result, 10 liters of gasoline would have about how much energy is in a liter of gasoline?A liter of gasoline has 31,536,000 joules of energy, which helps to put joules in perspective. A kilowatt-hour has a joule value of 3,600,000. Hence, the energy contained in a liter of gasoline is 8.76 kW/hr,
which is a much more manageable value. How many kilometers are in 10 liters of gasoline?Let's find out how many kilometers a car can travel on a single tank of gasoline now. The distance driven here is 145 kilometers of distance in 10 litres. So, in 10 litres = 145 km distance covered. That is, in one litre of petrol a car travels a total distance of 14.5 km.
To know more about energy visit:-
brainly.com/question/1932868
#SPJ9
an electron and a proton are each placed at rest in a uniform electric field of magnitude 498 n/c. calculate the speed of each particle 44.4 ns after being released.
An electron and a proton are placed at rest in a uniform electric field of magnitude 498 N/C. The speed of electron and proton 44.4 ns after being released is -3.87 × 10⁶ m/s and 2.13 × 10³ m/s respectively.
Given data:
Electric field (E) = 498 N/C,
Time (t) = 44.4 ns = 44.4 × 10⁻⁹ s,
Mass of electron (m₁) = 9.11 × 10⁻³¹ kg,
Mass of proton (m₂) = 1.67 × 10⁻²⁷ kg.
Formula:
The acceleration produced in the electric field is given by a = qE/m, where q is the charge of the particle, E is the electric field strength, and m is the mass of the particle.
From the above formula, we can find the acceleration produced by the electric field on the electron and proton as follows:
For electron (q = -e, where e is the charge of an electron)
a₁ = qE/m₁ = -eE/m₁
= -1.6 × 10⁻¹⁹ × 498/9.11 × 10⁻³¹
= -8.73 × 10¹⁴ m/s²
For proton (q = +e, where e is the charge of an electron)
a₂ = qE/m₂ = eE/m₂
= 1.6 × 10⁻¹⁹ × 498/1.67 × 10⁻²⁷
= 4.80 × 10⁷ m/s²
Using the kinematic equation, v = u + at, where u is the initial velocity, we can find the speed of each particle 44.4 ns after being released as follows:
For electron,
v₁ = u₁ + a₁t = 0 + (-8.73 × 10¹⁴) × 44.4 × 10⁻⁹
= -3.87 × 10⁶ m/s
For proton,
v₂ = u₂ + a₂t = 0 + (4.80 × 10⁷) × 44.4 × 10⁻⁹
= 2.13 × 10³ m/s
Thus, the speed of the electron is -3.87 × 10⁶ m/s and the speed of the proton is 2.13 × 10³ m/s.
To know more about electric field, refer here:
https://brainly.com/question/15800304#
#SPJ4
a wrench is used to tighten a nut. a 15n perpendicular force is applied 50cm away from the axis of rotation, and moves a distance of 10 cm as it turns. what is the torque applied to the wrench?
The torque applied to the wrench can be calculated using the formula:
torque = force x distance
where force is the perpendicular force applied, and distance is the distance from the axis of rotation at which the force is applied.
So, torque = 15 N x 0.5 m = 7.5 Nm
However, since the force moves a distance of 10 cm as it turns, the work done is:
work = force x distance moved = 15 N x 0.1 m = 1.5 J
This means that some of the energy applied by the force is lost to friction or other factors, and not all of it is converted into torque.
Learn more about torque at: https://brainly.com/question/17512177
#SPJ11
if you stand 8 m in front of a plane mirror and focus a camera on yourself, for what distance is the camera now focused?
The camera should be now focused at a distance of 16 meters.
The camera, in this case, should focus on the distance from the mirror to the object reflected by the mirror. The distance should be twice the distance of the object to the mirror.
The mirror image and the object should be equidistant from the mirror. This implies that the distance of the object from the mirror is equal to the distance of the mirror image from the mirror.
The distance that the camera should focus on is equal to the distance from the object to the mirror, multiplied by 2. Therefore, Distance from the object to the mirror = 8 meters
Distance from the camera to the object = distance from the mirror to the object, which is twice the distance from the mirror to the object
Distance from the camera to the object = 2 × 8 meters = 16 meters
Therefore, the camera should be focused at a distance of 16 meters.
To know more about the mirror image click here:
https://brainly.com/question/3663586
#SPJ11
if the position is 2 m, 30 degrees above the horizontal and to the south, and the force is 3 n, horizontal (neither up nor down) and to the west, then what is the magnitude of the torque?
If the position is 2 m, 30 degrees above the horizontal and to the south, and the force is 3 n, horizontal (neither up nor down) and to the west, then The magnitude of the torque in this scenario is 6 Nm.
The magnitude of the torque in this scenario is determined by calculating the cross product of the position vector and the force vector.
The position vector is given by r = 2m (30° south of the horizontal) and the force vector is given by F = 3N (west).
To calculate the cross product of these two vectors, we can use the formula:
Torque = r x F = |r||F| sin&theta,
where &theta is the angle between the vectors.
In this scenario, the angle between the position vector and the force vector is 90°.
Therefore, the magnitude of the torque can be calculated as follows:
Torque = |r||F|sin90° = (2m)(3N)(1) = 6 Nm.
for such more question on magnitude
https://brainly.com/question/24256733
#SPJ11
Using this circuit below, find the Norton's equivalent circuit about terminals a and b. Req and leg are the equivalent resistance and current used in the Norton's equivalent ciruict. V1 = 10 V, R1 = 4ohms, R2 = 8ohms „R₃ = 8ohms Select one: a. leq = -2.5 A, Req = 2 ohms b. leq = 2.5 A, Req = 2 ohms c. leq = 2.5 A, Req = 64 ohms d. leq = -2.5 A, Req = 12.8 ohms
The Norton's equivalent circuit and equivalent resistance of the given circuit is leq = 2.5 A, Req = 2 ohms. The correct answer is option b.
Norton's equivalent current, iNorton is calculated by dividing the voltage source by the series resistance of R2 and R3.
iNorton = V1 / (R2 + R3)
iNorton = 10 / (8 + 8)
iNorton = 0.625 A
Norton's equivalent resistance, RNorton is calculated by using the formula;
RNorton = R2 || R3
RNorton = (R2 x R3) / (R2 + R3)
RNorton = (8 x 8) / (8 + 8)RNorton = 4 ohms
Therefore, Norton's equivalent circuit is given by the current source of 0.625 A and the resistance of 4 ohms, connected across terminals a and b. The correct answer is option B; leq = 2.5 A, Req = 2 ohms.
To know more about equivalent resistance click here:
https://brainly.com/question/12286223
#SPJ11