According to the Principle of Superposition, sedimentary rocks like sandstone are typically younger than the igneous rocks, like basalt, from which they were formed. This is because sedimentary rocks form from the accumulation of sediments like sand, and these sediments can only accumulate on top of older rocks, thus making the sedimentary rocks younger.
In the case of sandstone containing pieces of basalt, this implies that the sandstone is younger than the basalt, as the basalt must have existed before the sedimentary layers of sandstone formed around it.
According to the Principle of Superposition, sedimentary rocks like sandstone are typically younger than the igneous rocks, like basalt, from which they were formed. This is because sedimentary rocks form from the accumulation of sediments like sand, and these sediments can only accumulate on top of older rocks, thus making the sedimentary rocks younger.
In the case of sandstone containing pieces of basalt, this implies that the sandstone is younger than the basalt, as the basalt must have existed before the sedimentary layers of sandstone formed around it.
To learn more about sedimentary rocks here:
https://brainly.com/question/30765754#
#SPJ11
in the picture above, when dr. alley slices his finger through the sand, he is recreating on a smaller scale what type of geologic process?
Dr. Alley is recreating the process of sedimentation on a smaller scale. Sedimentation is the process by which solid particles settle out of a liquid or a gas. The particles settle due to gravity and settle out of the medium into layers.
These layers are then compressed and cemented together to form sedimentary rocks. In the picture, Dr. Alley is slicing his finger through the sand and the particles settle in layers. This process of sedimentation can occur in a variety of geological settings, including in the ocean and on land. Sedimentation can also be caused by erosion, where material is removed from one location and sediment elsewhere. This is also happening in the picture, as the sand is settling in layers from Dr. Alley’s slicing. Sedimentation is an important process in the rock cycle, as it is how sedimentary rocks are formed.
Know more about sedimentation here:
https://brainly.com/question/29768268
#SPJ11
__________ are large masses of very thick ice found above the snow line.
glaciers
thid is because its big on both sides
Glaciers are large masses of very thick ice found above the snow line.
What is a glacier?A glacier is a large, long-lasting mass of ice that forms on land and flows downhill due to the accumulation of snow and ice. It's basically a frozen river of ice that can stretch for miles and is constantly changing shape and size. A glacier can only form when snow and ice accumulation exceed the amount of snow and ice that melt away, and this process can take hundreds or thousands of years. Glaciers can be classified as alpine or valley glaciers, which form in high-altitude areas with cold temperatures and heavy snowfall, or ice sheets, which form in polar regions and can cover entire continents. Glaciers can be found all over the world, from the polar ice caps to the highest mountains on every continent. Glaciers play a significant role in shaping the landscape and are also an important source of freshwater.
Learn more about glacier here: https://brainly.com/question/6666513
#SPJ11
which is true concerning the blue and magenta colors used to depict airspace on sectional aeronautical charts? group of answer choices faded lines represent airspace which extends to the surface.
The given statement "the blue and magenta colors used to depict airspace on sectional aeronautical charts have faded lines which represent airspace which extends to the surface" is true because a sectional chart is a map utilized in air navigation that portrays the details of an area's airspace.
This map has contour lines and visual terrain characteristics, including obstructions, lakes, and rivers, which provide pilots with the information they need to navigate safely in VFR conditions.
The sectional chart's primary objective is to depict land features that might help a pilot navigate the area. The chart contains many different symbols and markings to indicate obstacles, airports, and other important details that a pilot should be aware of while flying. The colors blue and magenta are used to denote airspace on sectional charts.
Meanwhile, magenta color denotes airspace that stretches from the surface up to 10,000 feet, above sea level. It indicates Class E airspace in which Class G airspace above 14,500 feet MSL is also depicted in magenta. The faded lines within the blue and magenta airspace denote airspace that extends to the surface, as mentioned earlier.
For such more question on aeronautical:
https://brainly.com/question/14371982
#SPJ11
the dry air that makes it over the top then wicks the water on the opposite side resulting in a much drier climate on one side of the mountain versus the other. this effect is called
This phenomenon is known as a "rain shadow" effect. A rain shadow occurs when moist air is forced to rise over a mountain, cooling and condensing the moisture, which is then released on the windward side of the mountain.
The air on the leeward side of the mountain is much drier, as it has lost its moisture to the windward side. This effect can be seen in mountainous areas around the world, creating dramatically different climates and environments on either side of the mountain. On the windward side, precipitation is often higher and the air is moister, creating lush vegetation.
On the leeward side, however, the air is dry, creating a more arid climate with little vegetation. The rain shadow effect is caused by the unequal heating of the Earth's surface, which causes air masses to rise, cool, and condense. When this happens, the moisture is carried away from the rising air mass and onto the windward side of the mountain. This creates a much drier environment on the leeward side.
To learn more about rain shadow here:
https://brainly.com/question/1106258#
#SPJ11
In india, they are actually not part of the caste system, outsiders known as * 7 points
Dalits?
servants
O untouchables
slaves
unseeables
In India, the people who are actually not part of the caste system and are known as outsiders are the B. Untouchables.
Who are India's Untouchables ?This group of people in India are called Dalits. They were historically referred to as "untouchables" because they were considered outside of the traditional caste system, which was and still is a significant social hierarchy in India. However, the term "untouchables" is now considered derogatory and is not used officially.
Dalits are often subjected to social and economic discrimination, and they have historically been relegated to menial and low-status jobs such as manual scavenging and sanitation work.
Find out more on untouchables at https://brainly.com/question/17102921
#SPJ1
what benefits do green roofs provide? (explain the following topics)
Water
Energy
The benefits provided by green roofs include:
Water management Energy efficiencyWhat are green roofs and how do they benefit us ?Green roofs can help to manage stormwater runoff by absorbing and retaining rainwater in the vegetation and soil layers. This reduces the amount of water that enters stormwater systems and can help to prevent flooding and erosion.
Green roofs can help to reduce the energy consumption of buildings by providing insulation and reducing the amount of heat that is absorbed by the roof. The vegetation and soil layers act as an insulating layer, helping to keep buildings cooler in the summer and warmer in the winter.
Find out more on green roofs at https://brainly.com/question/19109458
#SPJ1
A stream or river is a body of water flowing in a __________.
A stream or river is a body of water flowing in a channel.
A stream is a small river that can be crossed by wading or hopping from one bank to the other. If the stream is fed by underground water sources or has a large volume of water, it might be deep enough to require a bridge. The water in a stream or river usually flows downhill due to gravity, but it may also flow from high to low pressure or from an area of high elevation to one of lower elevation.
The movement of a river is aided by the slope of the ground, the size and position of rocks and other debris in its bed, and the amount and speed of water in the river. The soil composition and the landscape through which it flows will also influence the river's flow. The banks of a river or stream are often eroded by the water's movement, and the water may transport soil, rocks, and other debris downstream. This process aids in the formation of canyons, gorges, and other geologic formations.
Learn more about stream here: https://brainly.com/question/8282980
#SPJ11
of the seven continents, which is the only permanently inhabited one that does not currently have a monarchy?
Of the seven continents, Australia is the only permanently inhabited one that does not currently have a monarchy. In Australia, the government operates as a parliamentary democracy and a constitutional monarchy.
The head of state is the monarch of the United Kingdom, who is represented in Australia by the Governor-General. However, the monarch does not have any real power in the country and the government is run by elected officials.
The indigenous Australians were the first inhabitants of the continent, and their cultures and traditions have been respected and preserved by the government.
The legislative branch is made up of the Senate and the House of Representatives, and the executive branch is led by the Prime Minister and the Cabinet. Australia has a strong economy and a high standard of living, and it is recognized as a leader in areas such as healthcare, education, and environmental protection.
For such more question on Australia:
https://brainly.com/question/2322594
#SPJ11
when going from a 5 to a 6 on the richter scale, what is the increase in amplitude of seismic waves?
a. 1 times
b. 2 times
c. 10 times
d. 32 times
When going from a 5 to a 6 on the Richter scale, the increase in amplitude of seismic waves is 10 times.
This means that a magnitude 6 earthquake produces seismic waves with ten times more amplitude than a magnitude 5 earthquake. The Richter scale is a logarithmic scale, which means that each whole number increase represents a tenfold increase in the amplitude of the seismic waves. For example, a magnitude 7 earthquake produces waves with 100 times more amplitude than a magnitude 5 earthquake, while a magnitude 8 earthquake produces waves with 1,000 times more amplitude than a magnitude 5 earthquake, and so on.
Learn more about seismic waves here: brainly.com/question/13056218
#SPJ4
where is Paris, France located? my 6-month-old-nephew wants to know.
Answer:
western europe
western edge of Europe boarded by the bay of biscay
the largest portion of fresh water today is located in question 43 options: clouds. ice caps and glaciers. groundwater resources. the major rivers and lakes of the world.
The largest portion of fresh water today is located in ice caps and glaciers.
Freshwater is critical to life and human development, and is a finite resource on our planet. Ice caps and glaciers are the largest portion of freshwater on the planet today, accounting for roughly 68.7% of the planet's freshwater resources.
In a nutshell, ice caps and glaciers are the largest freshwater resources on the planet, accounting for about 68.7 percent of the planet's freshwater resources. Freshwater is crucial to life and human progress, and it is a finite resource on our planet. Therefore, it is important to protect and conserve freshwater resources.
To know more about planet's freshwater click on below link:
https://brainly.com/question/7100725#
#SPJ11
a spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of what type of deposit
A spinel found in metamorphic rock or an aquamarine found within a pegmatite are examples of hydrothermal deposits.
What are hydrothermal deposits?
Hydrothermal deposits are rocks containing mineral deposits that originated from hot water (hydrothermal) fluids circulating in the Earth's crust.
Hot water deposits often contain significant quantities of minerals, which are usually accompanied by the alteration of the surrounding rock. The hot water that makes up these deposits is generated by heat from the Earth's core, which is transferred through the mantle to the Earth's crust.
When the water is heated, it is driven to the Earth's surface, where it flows through cracks and fissures in the rock.
The water then cools, and minerals precipitate out of the solution, forming hydrothermal deposits. There are various types of hydrothermal deposits, including gold, silver, copper, zinc, and lead deposits, among others.
These deposits are commonly found in areas where tectonic plates meet, and the Earth's crust is being pushed and pulled in various directions.
To know more about Hydrothermal deposits, refer here:
https://brainly.com/question/14308184
#SPJ11
which level of government that was ultimately responsible for the preparation for and the aftermath of hurricane katrina
The level of government that was ultimately responsible for the preparation for and the aftermath of Hurricane Katrina is the federal government.
Hurricane Katrina was a hurricane that devastated the Gulf Coast of the United States in August 2005. It caused widespread flooding and severe damage to New Orleans, Louisiana, and other areas of the Gulf Coast.
The hurricane caused the loss of over 1,800 lives and damage that totaled over $100 billion in property damage. The federal government is a form of government in which power is divided between a central government and individual states.
The central government is responsible for overseeing the affairs of the entire country, while individual states are responsible for governing themselves within the confines of federal law.
In the case of Hurricane Katrina, the federal government was ultimately responsible for the preparation for and the aftermath of the disaster.
For such more question on federal:
https://brainly.com/question/1330910
#SPJ11
Match the seismic hazard with the correct definition.
Tsunami, subsidence, liquefaction, and seiche
1.) Rhythmic sloshing of water in lakes and enclosed basins
2.) Seismic energy transforms stable soil into mobile material incapable of supporting buildings
3.) Collapse and lowering of the land surface
4.) Large ocean waves generated.
The seismic hazard with the correct definition would be a seismic hazard is a seismic occurrence that may cause injury, loss of life, or property damage. The seismic hazards listed below are classified based on the type of event and its impact on the environment, infrastructure, and population.
Tsunami is a large ocean wave generated. Subsidence is the collapse and lowering of the land surface. Liquefaction refers to seismic energy that transforms stable soil into mobile material incapable of supporting buildings. Seiche is the rhythmic sloshing of water in lakes and enclosed basins.Seismic hazard is an inevitable part of living on our planet, particularly in areas where seismic activity is more prevalent.
Learn more about Liquefaction :- https://brainly.com/question/4067457
#SPJ11
where are the headwaters of the mississippi river? view available hint(s)for part a where are the headwaters of the mississippi river? gulf of mexico missouri river rocky mountains appalachian mountains northern minnesota
The headwaters of the Mississippi River are located in northern Minnesota.
The Mississippi River is one of the longest and largest rivers in the United States. It flows 2,350 miles from its headwaters in Minnesota to the Gulf of Mexico. The river is known for its important role in American history, as well as its economic and ecological significance. Headwaters are the sources of a river or stream. The headwaters of the Mississippi River are located in Itasca State Park, Minnesota.
The river then flows southward through the Midwest, eventually merging with the Ohio River and the Missouri River to form the Lower Mississippi River. The Mississippi River is an important transportation route, providing access to major cities such as St. Louis, Memphis, and New Orleans. It also provides a habitat for a wide variety of plants and animals, including fish, birds, and mammals.
Learn more about Headwaters of Mississippi river :- https://brainly.com/question/13932268
#SPJ11
A storage site for high-level radioactive waste would have all of the following features except: isolated from major population centers. geological stability. no contact with groundwater. near volcanic activity where waste can be destroyed by high temperatures. no contact with flowing water or air movement.
A storage site for high-level radioactive waste would have all of the following features except being near volcanic activity where waste can be destroyed by high temperatures. The correct option is option D (near volcanic activity where waste can be destroyed by high temperatures).
A storage site for high-level radioactive waste would have all of the following features except being near volcanic activity where waste can be destroyed by high temperatures. A storage site for high-level radioactive waste would have to have the following features:
• Isolated from major population centers.
• Geological stability.
• No contact with groundwater.
• No contact with flowing water or air movement.
High-level radioactive waste is highly hazardous, and it could cause catastrophic results if it were to be released into the environment. As a result, storage facilities must be built in such a way that they can securely contain high-level radioactive waste. They must be situated away from significant population centers to prevent exposure to large groups of people.
They must also be geologically stable, which means they must be constructed on a site that has not experienced tectonic activity for a long period of time. There should be no contact with groundwater to prevent the release of contaminants into the environment. Finally, there should be no contact with flowing water or air movement. The correct option is option D (near volcanic activity where waste can be destroyed by high temperatures).
For more about radioactive waste:
https://brainly.com/question/30561011
#SPJ11
remote sensing is one of today's geographer's numerous tools. fundamental to remote sensing are .
Remote sensing is a powerful tool used by geographers to analyze and monitor the Earth's surface from a distance. It involves capturing images from the sky using satellites, aeroplanes, or other airborne platforms.
These images are then used to create detailed maps that can be used to identify changes in the Earth's surface. Fundamentally, remote sensing involves the interpretation of reflected electromagnetic energy from the Earth's surface and atmosphere. Different wavelengths of energy, such as visible light, near-infrared, and thermal infrared, are used to collect data about the Earth's surface.
For example, visible light can be used to identify the presence of vegetation, while near-infrared can be used to measure the water content of plants. Thermal infrared can be used to measure surface temperature. The data collected through remote sensing can be used to better understand the Earth's surface, and can also be used to monitor changes over time.
This data can be used to track climate change, map land use, monitor deforestation, detect geological features, and identify hazards.
To learn more about Remote sensing here:
https://brainly.com/question/12042885#
#SPJ11
What happens when meteoroids hit the earth's surface? what occurs if they don't? what is it called if they reach the earth's surface?
Answer: When a meteoroid enters the Earth's atmosphere, it will typically burn up and disintegrate due to the heat generated by friction with the air. The resulting visible streak of light is called a meteor or shooting star.
If the meteoroid is large enough, it may survive the fiery descent and reach the Earth's surface. In this case, it is called a meteorite. The impact of a meteorite with the Earth's surface can cause various effects, depending on the size and speed of the meteorite, and the type of terrain it impacts.
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the __________ effect.
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.
What is the Greenhouse Effect?The Greenhouse Effect refers to the process by which the earth's atmosphere traps the heat from the sun and keeps it from being lost to space. The gases that create this effect are called "greenhouse gases," and they include water vapor, carbon dioxide, methane, nitrous oxide, and ozone. While some of these gases are produced naturally, others are human-made. There are many factors that can affect the level of greenhouse gases in the atmosphere, including industrialization, deforestation, and population growth.
As greenhouse gases accumulate in the atmosphere, they can trap more and more heat, leading to a phenomenon known as "global warming." This can have far-reaching effects on the planet, including rising sea levels, increased frequency and severity of storms, and changes in precipitation patterns.
Learn more about Greenhouse Effect here: https://brainly.com/question/19521661
#SPJ11
which of the following is a necessary component in the formation of sedimentary rocks? group of answer choices melting of a precursor rock weathering of a precursor rock high viscosity differential stress
The necessary component in the formation of sedimentary rocks is weathering of a precursor rock. Therefore the correct option is option B.
Sedimentary rocks are one of the three main rock categories that make up the Earth's crust. Sedimentary rocks are rocks that are made up of sediment, which is made up of tiny particles of sand, shells, and other materials that settle on the bottom of bodies of water.
The breakdown of rock by physical, chemical, or biological processes is known as weathering. Rocks and soils are damaged by weathering, which makes them smoother, smaller, and easier to transport.
Sedimentary rocks can be created by the weathering of a precursor rock. The resulting sediment is transported to a new location and then cemented and compacted into rock.
Thus, the necessary component in the formation of sedimentary rocks is weathering of a precursor rock. So, the correct option is B. Weathering of a precursor rock.
For such more question on sedimentary:
https://brainly.com/question/31060487
#SPJ11
The following question may be like this:
which of the following is a necessary component in the formation of sedimentary rocks? group of answer choices
melting of a precursor rock weathering of a precursor rock high viscosity differential stressdescribe the impacts that large continental ice sheets can have on climate. are they stabilizers or destabilizers?
The Antarctic Ice Sheet is losing mass at an accelerating rate, and playing a more important role in terms of global sea-level rise. The Amundsen Sea sector of West Antarctica has most likely been destabilized. Although previous numerical modeling studies examined the short-term future evolution of this region, here we take the next step and simulate the long-term evolution of the whole West Antarctic Ice Sheet. Results show that if the Amundsen Sea sector is destabilized, then the entire marine ice sheet will discharge into the ocean, causing a global sea-level rise of about 3 m. We thus might be witnessing the beginning of a period of self-sustained ice discharge from West Antarctica that requires long-term global adaptation of coastal protection.
what measure do seismologists use to calculate the distance from a seismic receiving station to the epicenter of an earthquake?
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake.
Seismology is the study of earthquakes and seismic waves that propagate through the Earth. Seismic waves are the waves that travel through the Earth's layers and cause earthquakes. These waves have different velocities, which allows seismologists to identify the Earth's internal layers and characteristics.A seismic wave is a ground-shaking energy that originates from the focus or hypocenter of an earthquake. They propagate through the Earth's layers and can be recorded by seismographs. The three main types of seismic waves are primary waves (P-waves), secondary waves (S-waves), and surface waves (L-waves).
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake. The P-waves are faster and therefore reach the station first. The S-waves are slower and take a longer time to arrive at the station. The time difference between the arrival of P and S waves is measured and used to calculate the distance from the station to the epicenter of the earthquake. This is done using a travel-time graph, which provides the distance from the station to the epicenter.
To know more about seismologists click on below link :
https://brainly.com/question/676287#
#SPJ11
what type of weather product allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams?
The type of weather product that allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams is called a Skew-T diagram. Skew-T diagrams are used to identify temperature and wind profiles in the atmosphere, helping meteorologists to make more accurate predictions about upcoming weather conditions. The diagram includes a set of lines that represent the environmental lapse rate, dry adiabatic lapse rate, and the saturation mixing ratio lines.
A Skew-T diagram is a type of graph used in meteorology to display the vertical profile of temperature, dew point, and wind in the atmosphere. It is called a "skew-T" because the temperature axis is skewed or tilted relative to the vertical axis, which allows for a larger temperature range to be displayed on the graph.
Learn more about Climograph: brainly.com/question/14088996
#SPJ11
what does arcgis pro do if you put several data sets with different coordinate systems in the same map?
ArcGIS Pro is an advanced GIS software that allows you to analyze and visualize data in 2D and 3D. It has a range of geoprocessing tools and an extensive range of map data that can be used for visualization and data analysis.
ArcGIS Pro will automatically perform coordinate system transformations on the fly when data sets with different coordinate systems are added to the same map.
The maps and data frames are matched to the first layer added with a specific coordinate system, and transformations are applied as required to display the data in the desired projection. In ArcGIS Pro, this is referred to as projection on the fly, and it is enabled by default.
When multiple layers are added to a map that has different coordinate systems, the map's coordinate system is established by the first layer added. ArcGIS Pro then matches the data frames and maps to the established coordinate system for the display. If a layer has a different coordinate system than the map, ArcGIS Pro automatically reprojects the layer's features on the fly to match the map's coordinate system, ensuring that all layers display properly.
ArcGIS Pro also enables the conversion of data in different coordinate systems into a common projection. This is accomplished by using the project tool, which is available in ArcGIS Pro's toolbox. This tool can be used to transform data from one coordinate system to another, and the new data can then be added to the map as a new layer.
In ArcGIS Pro, it's possible to save these newly projected data layers in the desired projection. The ArcGIS Pro software has numerous functionalities that can be used to work with data sets with different coordinate systems.
To know more about the "ArcGIS": https://brainly.com/question/30434626
#SPJ11
the oceania/pacific region is comprised of thousands of islands. these islands are classified as high and low islands based on their latitude. high islands are near the poles and low islands are near the equator. true false
False. The classification of high and low islands is based on their geological formation, not their latitude. High islands are typically volcanic and have rugged terrain with high elevations, while low islands are coral atolls and have relatively flat terrain with low elevations. The Oceania/Pacific region is indeed comprised of thousands of islands, but their classification as high or low is not determined by their latitude.
The Oceania/Pacific region is home to thousands of islands that are geologically diverse. One way that these islands are classified is by their geological formation into high and low islands. High islands are typically formed from volcanic activity and have rugged terrain with high elevations. They are often found near tectonic plate boundaries and near the poles. In contrast, low islands are coral atolls that have formed over millions of years as coral reefs grow on top of submerged volcanoes. These islands have relatively flat terrain with low elevations and are typically found near the equator.
Learn more about The Oceania/Pacific region: brainly.com/question/2846717
#SPJ11
match each part of the atlantic ocean to when it formed. central atlantic ocean central atlantic ocean drop zone empty. south atlantic ocean south atlantic ocean drop zone empty. north atlantic ocean north atlantic ocean drop zone empty. 30 million years ago.
The Central Atlantic Ocean formed around 200 million years ago, the South Atlantic Ocean formed around 130 million years ago, and the North Atlantic Ocean formed around 30 million years ago.
How old is the Atlantic Ocean?The supercontinent known as Pangaea experienced a rift that appeared around 150 million years ago. Along the submerged Mid-Atlantic Ridge, new crust formed.
This alteration caused Pangaea to fragment, creating the Atlantic Ocean in the process. Before 1492, the Atlantic Ocean was divided into two separate hemispheres: North and South America and Europe, Asia, and Africa.
Notwithstanding Norse colonies in Newfoundland & North America, as well as legends of Prince Madoc's Welsh and Irish expeditions. Its border is defined by the 20° East meridian, which extends south through Cape Agulhas to Antarctica. Under the 1953 description, it reaches all the way to Antarctica, although on later maps, the Southern Ocean defines its southern boundary at the 60th parallel.
To know more about North Atlantic Ocean visit:
https://brainly.com/question/21441555
#SPJ11
using maple syrup as an analogy for magma, what do you do to your syrup to decrease its viscosity so that it flows more evenly over your stack of waffles?
To decrease the viscosity of the syrup so that it flows more evenly over the stack of waffles, you should heat it.
Just like magma, which needs to be heated to reduce its viscosity and increase its fluidity, maple syrup also becomes more fluid as it is heated.
What is the meaning of viscosity?
The term viscosity is defined as the internal resistance or friction between the molecules of a fluid that opposes the fluid's movement when a force is applied to it. The viscosity of the fluid is directly proportional to the internal friction of the fluid. The viscosity of a fluid is generally high at low temperatures and low at high temperatures.
Viscosity can be reduced by a variety of methods, the most common of which is heating the fluid.
When heated, the internal friction between the fluid's molecules decreases, making it easier for the fluid to flow. This is analogous to the behavior of magma. When magma is heated, its viscosity decreases, allowing it to flow more readily.
To know more about viscosity, refer here:
https://brainly.com/question/2193315
#SPJ11
as transgression occurs at a given location, . choose one or more: a. sea level rises. b. the coastline migrates inland. c. sea level falls. d. the coastline migrates seaward. e. a mud layer accumulates over a sand layer.
Transgression is a term used to describe the phenomenon when the sea level rises and the coastline migrates inland. Therefore the correct option is option B.
This is a natural process that happens due to several reasons such as global warming, melting of glaciers and ice caps, and tectonic plate movements.
Transgression is the geological phenomenon that occurs when sea levels rise or land subsides, resulting in flooding and a gradual migration of coastal landforms inland.
Transgression occurs when relative sea level rises due to any one of several reasons such as melting of glaciers and ice caps, global warming, or tectonic plate movements.
Thus, transgression is a vital process that shapes our coastlines and plays a significant role in the geological history of the earth. Therefore the correct option is option B.
For such more question on Transgression:
https://brainly.com/question/30590214
#SPJ11
What are the three ways In which corruption will negatively affect the financial growth of South Africa
Answer:
unemployment, reduction in tax revenue, decline in business operation and ultimately, collapse of the economy
What is Fiji known for? a. grassland and hurricanes b. landfills c. tropical islands