If f(x)=3x-5, g(x)=7x-3, find (f+g)(x) and (f-g)(x

Slope is zero and the y-intercept is (0,-5)

What is slope ?

In mathematics, slope is a measure of the steepness of a line. It is defined as the ratio of the vertical change (rise) between two points on the line to the horizontal change (run) between the same two points.

In other words, the slope of a line is the change in the y-coordinate divided by the change in the x-coordinate between any two points on the line. It can also be thought of as the rate at which the line rises or falls as it moves horizontally.

The formula for calculating slope is:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are two points on the line.

According to the question:
The equation Y = -5 is already in slope-intercept form, which is y = mx + b, where m is the slope and b is the y-intercept.

Comparing the equation Y = -5 to y = mx + b, we can see that:

The slope, m, is 0, since there is no x-term in the equation.

The y-intercept, b, is -5, since that is the constant value in the equation.

Therefore, the correct answer is:

B. Slope is zero and the y-intercept is (0,-5)


To know more about slope visit:
https://brainly.com/question/14548961
#SPJ1

Answer: 49,000

48805 is greater than 48500, so it rounds to 49,000

The volume of the solid is approximately 0.558 cubic units.

To find the volume of the solid, we need to integrate the area of the semi-circles along the a-axis.

We know that the diameter of each semi-circle is the distance between the functions f(x) and g(x), which is:

d(a) = f(a) - g(a) = ln(a) + 1 - (a-1) = ln(a) - a + 2

The radius of each semi-circle is half of the diameter, which is:

r(a) = (ln(a) - a + 2) / 2

The area of each semi-circle is π times the square of its radius, which is:

[tex]A(a) = πr(a)^2 = π/4 (ln(a) - a + 2)^2[/tex]

To find the volume of the solid, we integrate the area of each semi-circle along the a-axis, from a = e to a = 2:

V = ∫[e,2] A(a) da

V = ∫[e,2] π/4 [tex](ln(a) - a + 2)^2 da[/tex]

V ≈ 0.558 (rounded to the nearest thousandth)

Therefore, the volume of the solid is approximately 0.558 cubic units.

for such more question on  volume

https://brainly.com/question/6204273

#SPJ11

Answer:

32.67 square meters

Step-by-step explanation:

finding the area of the shaded region.

area of sector = (θ/360°) x πr²

where "θ" is the central angle of the sector in degrees, "r" is the radius of the sector, and π is a mathematical constant approximately equal to 3.14.

Substituting the given values into the formula, we get:

area of sector = (60°/360°) x π(14m)²

area of sector = (1/6) x 3.14 x 196m²

area of sector = 32.67m² (rounded to two decimal places)

Therefore, the area of the section is 32.67 square meters

Answer:

162, 147 etc.

Step-by-step explanation:

we have to find

[tex]N = k^2 \cdot p[/tex]

we can iterate k = 1 to 10 to check all possible solutions,

[tex]N = 9^2 \cdot 2[/tex]

[tex]N = 7^2 \cdot 3[/tex]

N = 162, 147 etc.

Hopefully this answer helped you!!

Answer:

The midpoint of a line segment AB with endpoints A(x1, y1) and B(x2, y2) is given by the coordinates:

[(x1 + x2) / 2, (y1 + y2) / 2]

In this case, A is located at (1, 4) and B is located at (3, -6). So the midpoint M of AB is:

[(1 + 3) / 2, (4 + (-6)) / 2]

= [2, -1]

Therefore, the midpoint of AB is at the point (2, -1).

The coordinates of the midpoint of the line AB is [2, -1]

Section formula is used to find the ratio in which a line segment is divided by a point internally or externally.

It is used to find out the centroid, incenter and excenters of a triangle. In physics, it is used to find the center of mass of systems, equilibrium points, etc.

Given that, we need to find the midpoint of AB if A located at (1, 4) and B is located at (3, -6).​

The midpoint of a line segment AB with endpoints A(x1, y1) and B(x2, y2) is given by the coordinates:

[(x1 + x2) / 2, (y1 + y2) / 2]

In this case, A is located at (1, 4) and B is located at (3, -6).

So the midpoint M of AB is:

= [(1 + 3) / 2, (4 + (-6)) / 2]

= [2, -1]

Hence, the midpoint of AB is at the point (2, -1).

Learn more about section formula click;

https://brainly.com/question/30242630

#SPJ2

(x + 5) is nοt necessarily a factοr οf the pοlynοmial, (x-4) is a factοr οf the pοlynοmial are cοrrect statement.

Functiοn can be define in which it relates an input tο οutput.

If the graph οf a pοlynοmial functiοn P(x) has x-intercepts at x = -4, x = 0, and x = 5, then we knοw that the factοrs οf P(x) are (x + 4), x, and (x - 5). This is because a pοlynοmial has x-intercepts where the value οf P(x) is equal tο zerο, and this οccurs when each factοr is equal tο zerο.

Therefοre, we can cοnclude that (x + 4) and (x - 5) are factοrs οf the pοlynοmial P(x), but x is nοt necessarily a factοr. This is because x is a linear factοr with a zerο intercept, but it cοuld be cancelled οut by anοther factοr in the pοlynοmial.

Thus, the cοrrect statement is:

(x + 5) is nοt necessarily a factοr οf the pοlynοmial.

(x-4) is a factοr οf the pοlynοmial.

The degree οf the pοlynοmial is 3 οr greater since the pοlynοmial has three x-intercepts. Hοwever, we cannοt determine the exact degree οf the pοlynοmial withοut additiοnal infοrmatiοn.

Therefοre, (x + 5) is nοt necessarily a factοr οf the pοlynοmial, (x-4) is a factοr οf the pοlynοmial are cοrrect statement.

To learn more about factοr οf the pοlynοmial from given link.

https://brainly.com/question/28315959

#SPJ1

the probability that they are both Democrats. round to the nearest thousandth if necessary is 0.194

The probability that BOTH is democrats means the probability of "one being democrat" AND "another also being democrat".

The AND means we need to MULTIPLY the individual probability of a person being a democrat.

The probability that a voter is democrat is 44% (0.44) -- stated in the problem

Now, the Probability of BOTH being Democrats is simply MULTIPLYING 0.44 with 0.44

Rounded to the nearest thousandth, 0.194

The last answer choice is correct.

the complete question is-

In one town 44% of all voters are Democrats if two voters are randomly selected for a survey find the probability that they are both Democrats. round to the nearest thousandth if necessary.

0.189

0.880

0.440

0.194

learn more about probability

https://brainly.com/question/30034780

#SPJ1

The equation for the function is D(x) = 65 - 0.8x. Where 65 is the initial depth of the water and 0.8x is the amount by which the depth drops after x months.

What is a linear function?

A linear function is a mathematical function that has a constant rate of change or slope between the independent variable (x) and the dependent variable (y). It is a function that can be graphically represented as a straight line.

We can use a linear function to approximate the depth of the water in the reservoir x months after the start of the study, since the depth is dropping at a constant rate of 0.8 meters per month. Let D(x) be the depth of the water in meters x months after the start of the study. Then we have:

D(x) = 65 - 0.8x

where 65 is the initial depth of the water and 0.8x is the amount by which the depth drops after x months.

Therefore, the equation for the function is D(x) = 65 - 0.8x.

To learn more about linear function from the given link:

https://brainly.com/question/20286983

#SPJ1

According to the question the percent abundance of the medium nails in the sample is approximately 18.95%.

Whenever the set of data is presented from least to largest, the median is indeed the number in the middle. For instance, since 8 is in the middle, this would represent the median value here.

To find the percent abundance of the medium nails in the sample, we first need to calculate the total number of nails in the sample:

Total number of nails = 67 + 18 + 10 = 95

Next, we can calculate the percent abundance of the medium nails using the formula:

Percent abundance = (number of medium nails / total number of nails) x 100%

Using the values from of the table as inputs, we obtain:

Percent abundance of medium nails = (18 / 95) x 100% ≈ 18.95%

As a result, the sample's average percentage of medium nails is roughly 18.95%.

To know more about medium visit:

https://brainly.com/question/16408033

#SPJ1

Answer:

18

Step-by-step explanation:

siz times three is eighteen

To find the area of the total figure, we need to first find the areas of the rectangle and triangle, and then add them together.Therefore, the area of the total figure is 200 square feet.

Area is the measurement of the size of a two-dimensional surface enclosed by a closed figure

Area of rectangle = length x width

= 20 ft x 8 ft

= 160 sq. ft

Area of triangle = 1/2 xbase xheight

= 1/2 x 8 ft x 10 ft

= 40 sq. ft

To find the base of the triangle, we can use the Pythagorean theorem, which states that the square of the hypotenuse (slope) of a right triangle is equal to the sum of the squares of its two sides. In this case, the hypotenuse is 12 ft, one of the other sides is the height of the triangle (10 ft), and the other side is the base of the triangle (b).

Using the Pythagorean theorem, we have:

12² = 10² + b²

144 = 100 + b²

44 = b²

b = √44

b ≈ 6.63 ft

Now that we know the base of the triangle, we can find the area of the total figure by adding the area of the rectangle and the area of the triangle:

Area of total figure = area of rectangle + area of triangle

= 160 sq. ft + 40 sq. ft

= 200 sq. ft

To know more about Pythagorean theorem visit:

https://brainly.com/question/15169173

#SPJ1

The volume of the cone is  2119. 5 cubic centimeters

The formula used for calculating the volume of a cone is expressed as;

V = πr² h/3

Given that the parameters are namely;

Now, substitute the values, we have;

Volume , V = 3.14 × 15² × 9/3

Divide the values, we have;

Volume = 3.14 × 225 × 3

Multiply the values, we get;

Volume, V = 2119. 5 cubic centimeters

Learn about volume at: https://brainly.com/question/1972490

#SPJ1

The ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

The perimeter of a triangle is the total length of its three sides. To find the perimeter of a triangle, you need to add up the lengths of all three sides.

The ratio between the side lengths of triangle ABC and triangle XYZ is given as follows:

5/15 = 1/3.

The perimeter of a triangle is measured in units, as area the side lengths, hence they have the same ratio, and thus the ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

More can be learned about the perimeter of a triangle at https://brainly.com/question/24382052

#SPJ1

Answer:

112

Step-by-step explanation:

According to the circle graph, the mystery books make up 20% of all books sold. So, we can calculate the number of mystery books sold as follows:

Number of mystery books = 20% of 560

= (20/100) x 560

= 112

Therefore, the number of mystery books sold at the book fair was 112.

Step-by-step explanation:

the perimeter of a rectangle is

2×length + 2×width

in our case

length = width + 3

and

2×length + 2×width = 30

using the first equation in the second :

2×(width + 3) + 2×width = 30

width + 3 + width = 15

2×width + 3 = 15

2×width = 12

width = 12/2 = 6 ft

length = width + 3 = 6 + 3 = 9 ft

Answer:

(gof)(x) = 14x + 1

Step-by-step explanation:

We can think of (gof)(x) as g(f(x)).  Writing it in this form shows that we must start with the inner function and work our way to the outer function.

Essentially, the input of the inner function yields an output and the output becomes the input of the outer function.

f(x) means that the input is x and since we're given no value for x (e.g. x = so and so), the output is the original function or 2x - 1

Now, this output becomes the input for g(x):

g(2x-1) = 7(2x - 1) + 8

14x -7 + 8

(gof)(x) = 14x + 1

Answer:

1. 57/16 or 3.5625 ounces of water

8 : 4.75

1 : 19/32  -----> divide both by 8

19/32x6=57/16 = 3.56 ounces

2. 2.4375 ounces of other ingredients

6-3.5625=2.4375

Answer:

A.=False

B.=True

C.=False

D.=True

Step-by-step explanation:

The original ration is 2 gallons of water for 4 players.

Each player requires 1/2 gallon of water.

To get the amount of water needed multiply 1/2 by the amount of players.

1*(1/2) does not equal 1

2*(1/2) equals 1

10*(1/2) does not equal 4

30*(1/2) equals 15

Answer:

1.986 x 10 to the tenth power

Step-by-step explanation:

Answer: 2.5 dm

Step-by-step explanation:

Divide 25.0 by 10

= 2.5

the pressure at a depth of 66 ft is 197,580 Pa, and the volume of the tank at this depth is 0.000505 L.

To find the pressure at a depth of 66 ft in a liquid, we can use the formula:

pressure = density x gravity x depth

Assuming the liquid in the tank is water, the density is 1000 kg/m³, and gravity is 9.81 m/s².

First, we need to convert 66 ft to meters:

66 ft x 0.3048 m/ft = 20.1168 m

Then, we can find the pressure at this depth:

pressure = 1000 kg/m³ x 9.81 m/s² x 20.1168 m = 197,580 Pa

To find the volume of the tank at this depth, we can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature:

P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume (1 atm and 10 L, respectively), and P₂ and V₂ are the final pressure and volume.

We can rearrange this equation to solve for V₂:

V₂ = (P₁ x V₁) / P₂

Substituting the values, we get:

V₂ = (1 atm x 10 L) / (197,580 Pa / 1 atm) = 0.000505 L

To know more about Pressure, click here,

https://brainly.com/question/29258039

#SPJ1

Answer:

Experimental Procedure:

Materials:

Piece of wood

Electronic balance

Bunsen burner

Heat-resistant mat

Stopwatch or timer

Safety goggles

Lab coat

Safety Precautions:

Wear safety goggles and a lab coat to protect your eyes and clothing from any sparks or flames.

Place the heat-resistant mat under the Bunsen burner to prevent any accidental fires.

Use the Bunsen burner only under adult supervision.

Be cautious when handling hot objects, and allow them to cool before touching.

Procedure:

Measure the initial mass of the piece of wood using an electronic balance, and record it in a table.

Light the Bunsen burner, and place the piece of wood over the flame using tongs. Ensure that the wood is fully engulfed in the flame.

Use a stopwatch or timer to time how long the wood burns for (in this case, 15 minutes).

After 15 minutes, turn off the Bunsen burner and remove the piece of wood from the flame using tongs.

Allow the wood to cool, and then measure its final mass using the electronic balance, and record it in the table.

Calculate the difference between the initial and final mass of the wood, and record it in the table.

Repeat steps 1-6 three times to obtain three sets of data.

Calculate the average mass of the burned wood and compare it to the initial mass of the unburned wood to determine if the student's prediction was correct.

Conclusion:

If the average mass of the burned wood is less than the initial mass of the unburned wood, the student's prediction was correct, and he can conclude that the wood underwent a chemical change when it was burned. If the average mass is greater than or equal to the initial mass, the prediction was incorrect, and the student may need to revise his hypothesis or experimental design.

10³•10⁵•10³

Step-by-step explanation:

10³means 10×3,10⁵means 10×5and 10³means 10×3 30+50+30=110

To subtract 6/7 from 2 1/4, we need to find a common denominator. The least common multiple of 7 and 4 is 28, so we can convert 2 1/4 to 9/4 and 6/7 to 24/28. Then we can subtract:

9/4 - 24/28

= 63/28 - 24/28

= 39/28

Therefore, 2 1/4 - 6/7 = 39/28.

To solve for the blank in 2 5/12 - blank = 2/3, we can start by converting 2 5/12 to an improper fraction:

2 5/12 = (2*12 + 5)/12 = 29/12

Then we can subtract 2/3 from both sides:

2 5/12 - 2/3 = blank

To subtract these fractions, we need to find a common denominator. The least common multiple of 3 and 12 is 12, so we can convert 2/3 to 8/12. Then we can subtract:

29/12 - 8/12

= 21/12

= 7/4

Therefore, the blank in 2 5/12 - blank = 2/3 is 7/4.

To subtract 5 3/8 from 7 1/12, we need to find a common denominator. The least common multiple of 8 and 12 is 24, so we can convert both mixed numbers to improper fractions:

7 1/12 = (712 + 1)/12 = 85/12

5 3/8 = (58 + 3)/8 = 43/8

Then we can subtract:

85/12 - 43/8

= 85/12 - (433)/(83)

= 85/12 - 129/24

= 5/24

Therefore, 7 1/12 - 5 3/8 = 5/24.

To solve for the blank in blank + 7/10 = 2 9/20, we can start by converting 2 9/20 to an improper fraction:

2 9/20 = (2*20 + 9)/20 = 49/20

Then we can subtract 7/10 from both sides:

blank + 7/10 - 7/10 = 49/20 - 7/10

Simplifying the right side:

49/20 - 7/10 = (492)/(202) - (74)/(104) = 98/40 - 28/40 = 70/40 = 7/4

Therefore, blank + 7/10 - 7/10 = 7/4, and solving for blank:

blank = 7/4

Therefore, the blank in blank + 7/10 = 2 9/20 is 7/4.

The gradient of the line is 5, and the y-intercept of the line is 15.

The given equation is in the form of y = mx + c, where m is the gradient (slope) of the line and c is the y-intercept of a straight line represented in 2D plane.

Rearranging the given equation, we get:

y - 6 = 5x + 9

Adding 6 to both sides, we get:

y = 5x + 15

Now we can see that the equation is in the required form of y = mx + c. The gradient (slope) of the line is 5, which is the coefficient of x in the equation. The y-intercept is 15, which is the constant term in the equation.

To know more about straight line, click here,

https://brainly.com/question/29223887

#SPJ1

Therefore, the quadratic function in standard form that represents the data in the table is: y = 1/2 x² - 5/2 x + 5.

A function is a mathematical concept that describes the relationship between two sets of numbers. It is a rule that assigns to each input (or element in the domain) exactly one output (or element in the range). In simpler terms, a function is like a machine that takes in a number and produces another number as output, according to some specific rules. The input is usually denoted by x, and the output by f(x), which is read as "f of x". Functions can take many forms, such as linear, quadratic, trigonometric, exponential, logarithmic, and more. They are widely used in mathematics, science, engineering, and many other fields to model and analyze various phenomena.

Here,

To write a quadratic function in standard form, we need to use the general form of the quadratic equation:

y = ax²+ bx + c

where a, b, and c are constants. We can use the values in the table to find these constants.

When x = 2, y = 3

When x = 4, y = 1

When x = 6, y = 3

When x = 8, y = 9

When x = 10, y = 19

Substituting these values into the quadratic equation, we get:

3 = 4a + 2b + c

1 = 16a + 4b + c

3 = 36a + 6b + c

9 = 64a + 8b + c

19 = 100a + 10b + c

We can now use these equations to solve for a, b, and c. One way to do this is to use a matrix equation:

|16 4 1| |a| |1|

|36 6 1| |b| = |3|

|64 8 1| |c| |9|

Using a calculator or matrix software, we can solve for a, b, and c:

a = 1/2

b = -5/2

c = 5

To know more about function,

https://brainly.com/question/28193995

#SPJ1

Answer:

x is first angle

y is second angle

and z is third angle

Step-by-step explanation:

This question is solved by a system of equations. We have that:x is the first angle.y is the second angle.z is the third angle.Doing this, we get that:The first angle measures 30º.The second angle measures 67º.The third angle measures 83º.The sum of the measures of the angles of a triangle is 180. This means that The sum of the measures of the second and third angles is five times the measure of the first angle.This means that:From this, the first angle can be found:The measure of the first angle is of 30º.The third angle is 16 more than the second.This means that:Since We get that the second angle is:The second angle measures 67º.For the third angle:The third angle measures 83º.

Answer:

I will not show you the process it is easy the answer is 4.5 or 6 ≈

Answer:2

Step-by-step explanation:Because the 2 is closest to the middle line

Answer:

relationship describes angles 1 and 2 is supplementary angles. From the given figure

it is concluded that

the relation ship between angle 1 and 2 is supplementary angles

because its is  linear pair

and forms a line

therefore , the angles are supplementary angles

hence , relationship describes angles 1 and 2 is supplementary angle

Step-by-step explanation: Hope this helps !! Mark me brainliest!! :))