In a 250 mL sealed container at 150℃, 0.50 mol of both iodine gas I2(g) and bromine gas, Br2(g) are mixed and allowed to react until they form an equilibrium with iodine monobromide gas IBr(g). The equilibrium constant for this reaction is 1.2 x 102. What are the equilibrium concentrations for iodine gas and bromine gas? I2(g) + Br2(g) ↔ 2IBr(g)

Step 1

Charles's law states that the volume (V) of a gas is directly proportional to its absolute temperature. It is assumed that the pressure and the quantity of gas remain constant.

Mathematically:

-------------------

Step 2

Information provided:

T1 = 10 °C + 273 = 283 K

V1 = 3 L

---

T2 = Unknown

V2 = 10 L

-------------------

Step 3

Procedure:

Answer: 943 K or 670 °C

Answer:

4.839 × 10^14 Hz or s^-1

Explanation:

speed of light = wavelength times frequency

frequency = speed of light ÷ wavelength

3.00 x 10^8 = speed of light

3.00 x 10^8 m/s ÷ 6.2 x 10^-7 m = 4.839 × 10^14 Hz or s^-1

socraticorg

An Arrhenius base is a compound which ionizes to yield hydroxide ions (OH−) in aqueous solution.

827.76 m/60.65 s = 13.65 m/s

685.5 mol/0.50 L = 1371 mol/L

20.9476 cm x 26 cm = 545 cm^2

When adding/subtracting

Use the least number of significant figures past the decimal point when adding or subtracting numbers.

When multiplying/dividing

Use the least number of significant figures present in any number in the problem when multiplying or dividing numbers.

The wavelength of the light in this case is 92 nm

In accordance with the Bohr model of the atom, We know that electrons could be promoted from the from a lower to a higher energy level. As such, the movement of the electron would lead to the emission of light of a characteristic wavelength.

Hence;

1/λ = 1.097 * 10^7 (1/[tex]n_{2} ^{2}[/tex] - 1/[tex]n_{1} ^{2}[/tex])

Hence;

n1 = 1

n2 = 12

We then have;

1/λ = 1.097 * 10^7 (1/1^2 - 1/12^2)

1/λ = 1.097 * 10^7 (1 - 0.0069)

λ = 9.2 * 10^-8 m or 92 nm

Learn more about wavelength:https://brainly.com/question/13533093

#SPJ1

Option B is correct

Given the chemical reaction below;

The equilibrium constant for the reaction is given as;

Given the following parameters

Substitute

Therefore the equilibrium constant for the reaction is 1.7 * 10^-3

The Lewis Structure for NH₄⁺ (Ammonium ion) is described as having four sigma bonds around a Nitrogen Atom. It is also to be noted tha there is a +1 charge on the Nitrogen atom.

The nitrogen atom is surrounded by four sigma bonds. As a result, the form of NH4+ is tetrahedral. The total number of sigma bonds and lone pairs surrounding the nitrogen atom is four. As a result, the geometry should be tetrahedral.

Lewis structures also referred as Lewis dot formulas, Lewis dot frameworks, electron dot structures, or Lewis electron dot structures, are schematics that depict the bonding between atoms in a molecule as well as any lone pairs of electrons that may occur.

Learn more about Lewis Structure:
https://brainly.com/question/20300458
#SPJ1

By following Daltons laws of partial pressure .

" the pressure that eachgaswould have exerted ,Add up to the total pressure" .

• Therefore :

• Total Pressure = P.Pressure (oxygen) + P.Pressure of (He)

15 atm = 6atm + Pressure of He

P.Pressure ofHe = 15atm-6atm

= 9 atm

This means that the partial pressure of He = 9atm +

The rate constant ( k )= 9.2 x 10⁻³ s⁻¹The half life  (t1/2 )= 75.3 s

It is given that the reaction is 46% complete in 45 s

The relation between rate constant and the half life can be shown as:

For first order reaction:

ln[A]=−kt+ln[A]o

46% complete, 54% remains

A = 0.54

Ao = 1

Put the value of given data in the formula:

ln A = -kt + ln Ao

ln 0.54 = -k.45 + ln 1

-0.616=-k.45

k = 13.6 x 10⁻³ s⁻¹

The half life can be determined by using the formula:

t1/2 = (ln 2) / k

t1/2 = 0.693 / 13.6 x 10⁻³

t1/2 = 0.0509 ×10⁻³ s.

t1/2 = 5.09 ×[tex]10^{5}[/tex] s.

Therefore, the rate constant for the first order reaction will be 13.6 x 10⁻³ s⁻¹ and half life will be 5.09 ×[tex]10^{5}[/tex] s.

To know more about rate constant

https://brainly.com/question/14521461

#SPJ1

1) Converting grams to moles or moles to grams

In order to do this kind of conversion, we need the molar mass (in grams) of the compound to use it as a conversion factor as follows:

-

The total energy to break the hexane bonds will be equal to the sum of each of the energy to break each bond.

So the first thing we're going to do is determine how many and what type of bonds hexane has. Hexane is an alkane, meaning the C-C bonds are all single bonds. We also have C-H bonds. According to the structure of hexane, we will count each of the bonds in the following figure:

The number of C-H bonds is written in blue, we see that there are 14 C-H bonds, which coincides, being an alkane, with the number of hydrogen atoms.

The number of C-C bonds is written in orange. The number of C-C bonds is equal to 5.

Now, we multiply the energy to break each bond by the number of bonds and add the energy of the C-H and C-C bonds.

So, for 1 mol of hexane the energy. required to break all the bonds will be 7514kJ

Answer: The closest value to the answer is 7520. D) 7520 kJ

The chart of given following ion is

Protons Electrons Neutrons

1) 6 2 8

2) 6 2 7

3) 8 10 9

4) 8 10 8

Simply put, a subatomic particle is a particle that is smaller than an atom. Protons, electrons, and neutrons are the three subatomic particles that may typically be separated from an atom.

Learn more about Sub atomic particles here:

https://brainly.com/question/16847839

#SPJ13

The concentration of C₂H₅OH in the resulting solution is 1.332 M.

given that :

mass of C₂H₅OH = 30.7 g

molar mass =46.07 g/mol

volume =  500 ml = 0.5 L

number of moles can be calculated by the following formula :

number of moles = mass / molar mass

no. of moles = 30.7 g / 46.07 g/mol

no. of moles = 0.666 mol

now, the concentration of C₂H₅OH :

Molarity = no. of mole / volumes in l

Molarity = 0.666 / 0.5

Molarity = 1.332 M

Thus, If 30.7 g of C₂H₅OH (MM = 46.07 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, The concentration of C₂H₅OH in the resulting solution is 1.332 M.

To learn more about Molarity here

https://brainly.com/question/8732513

#SPJ1

The mass of 0.0750 moles of calcium is 3.01g.

To calculate the mass of calcium we need to use the molar mass that we can find in the Periodic Table of Elements.

The molar mass of calcium is 40.1 g/mol.

Now, with a mathematical Rule of Three we can calculate the mass of calcium of 0.0750 moles:

So, the mass of 0.0750 moles of calcium is 3.01g.

A)Nuclear fusion releases protons and neutrons, so the total number of protons and neutrons in a star changes throughout its life is the true statement.

A suggested method of producing energy would use heat from nuclear fusion processes to produce electricity. A heavier atomic nucleus is created by the fusion of two lighter ones, which also produces energy. Fusion reactors are devices created to use this energy.

Nuclear fusion is less risky than nuclear fission because the fuel rods produced by nuclear fission include dangerous radioactive waste that may be used in weapons and must be maintained carefully for thousands of years.

Powering the Sun and other stars are nuclear fusion processes. Two light nuclei combine to produce one heavy nucleus during a fusion process. The resultant single nucleus's total mass is less than the mass, which causes the process to release energy.

learn more about Nuclear fusion refer

https://brainly.com/question/17870368

#SPJ13

Action and response are two forces that have the same magnitude but opposing directions.

Explanation.

The force used by a dog as it moves across the ground is known as the action force. The force that the earth exerts on the dog is the reaction force, on the other hand. Newton's third law of motion serves as its foundation.

When we walk on the ground, we push the earth backward with our feet, but the ground pushes our feet forward with an equal force, which propels us forward. Because of this, the action is the force that pushes the ground backward, and the reaction is the force by the ground on our feet.

To know more about reaction force visit:-
https://brainly.com/question/14853868

#SPJ13

We can see that the solution has a boiling point of 80.93°C.

The atmospheric pressure does equal the pressure of a liquid as we heat the system. The temperature at which this occurs is called the boiling point. Now we know that the boiling point of the pure benzene is 80.1 °C.

Given that;

ΔT = K m i

ΔT = boiling point elevation

K = boiling point constant

m = molality of the solution

i = Van Hoff factor (molecular solute)

ΔT = 2.53°C /m * 0.33 m * 1

ΔT =  0.83°C

The boiling point of the solution is now gotten from ; 0.83°C + 80.1 °C

= 80.93°C

Learn more about boiling point :brainly.com/question/2153588

#SPJ1

Solutions :

We are given

• mass of potassium = 2.75 g

• Recall that 1 mole of potassium = 39.0983 grams

So , 2.75 g will represent

To solve this question we will use the integrated rate late law for first order reaction:

By substituting the values we have to determine the unknown we get:

Answer: Rate constant k is 6.392x10^-4 per min.

Answer:

The car will most likely move the fastest on the wood. Carpet will create drag due to the friction between the car's wheels and the carpet. Bricks are not smooth so drag will occur, however it will be minimal. Wood is usually smooth and there is almost no drag or friction...the car will glide easily over the surface.

Explanation:

Hope this helps!!

Answer:

Explanation:

Here, we want to get the definition of a weak base

A weak base is a base that does not dissociate completely in solution.

What this means is that when the base is placed in a solution, its dissociation into the corresponding metallic and hydroxide ions is incomplete

Answer:

Explanation:

Here, we want to get the molar volume of the gas

At STP, 1 mole of a gas occupies a volume 0f 22.4 dm^3

The conditions at STP are 273K

Answer:

the answer is A since the foot is printed

Answer:

It represents a trace evidence,since it leads to a suspect

Option B.   All cobalt atoms are identical and are consistent with dalton's atomic theory as it was originally stated.

The primary part of dalton's atomic theory states that everyone relies on is manufactured from atoms, which can be indivisible. the second part of the theory says all atoms of a given element are the same in mass and house. The 0.33 part says compounds are combos of two or more exceptional kinds of atoms.

Dalton's atomic theory, atoms of one element are all the equal or same. for this reason, the assertion that every cobalt atoms are identical is consistent with Dalton's concept of the shape of atoms.

Dalton's atomic concept additionally proposed that each atom of an element is identical in nature and exceptional elements vary in length, mass, and chemical properties. So, the accurate answer is choice 1 which says that the first and 2d statements are correct.

Learn more about dalton's atomic theory here:-https://brainly.com/question/13157325

#SPJ4

Surfactants are characterized to lower the surface tension between two liquids or between a liquid and a gas and so on.

You can see an example for detergents: the detergents are surfactants that lower the surface tension and that's because you can see that the dirt disperses easily and other substances, so the answer is false.

Na+ (g) --> Na+ (aq) AH = -364 kJmol 1 is endothermic reaction. The given reaction is False, As H is negative hence exothermic reaction not endothermic

What is endothermic  reaction?

Chemical processes referred to as endothermic reactions occur when the reactants take in heat energy from their environment to create products. These reactions produce a cooling effect by bringing the temperature of the space around them down. Ice cubes absorb heat energy from their surroundings and melt to generate liquid water as an example of an endothermic physical process (no chemical bonds are broken or formed).

False, As H is negative hence exothermic reaction not endothermic

To know more about endothermic reaction from the link

https://brainly.com/question/6506846

#SPJ13

Answer:

Not enough information to tell.

Explanation:

What is given?

Mass of Zn = 10.0 g,

Mass of HCl = 10.0 g,

Molar mass of Zn = 65.4 g/mol,

Molar mass of HCl = 36.4 g/mol,

Molar mass of ZnCl2 = 136.2 g/mol,

Molar mass of H2 = 2 g/mol.

Step-by-step solution:

First, let's convert 10.0 g of each reactant to moles using their respective molar mass:

Now, let's identify what is the limiting reactant. Let's see how many moles of ZnCl2 can be produced by 0.153 moles of Zn if 1 mol of Zn reacted produces 1 mol of ZnCl2, and how many moles of ZnCl2 can be produced by 0.275 moles of HCl if 2 moles of HCl reacted produces 1 mol of ZnCl2:

You can realize that the limiting reactant, in this case, is HCl because is the first reactant consumed first and this reactant 'impose' the limit to produce the products.

So now, let's find how many moles of H2 are being produced by 0.275 moles of HCl if 2 moles of HCl reacted produces 1 mol of H2:

The final step is to convert each number of moles of each product to grams using their respective molar mass, as follows:

We're producing 18.8 g of zinc chloride (ZnCl2), and 0.276 g of hydrogen (H2), so based on this logic the answer would be not enough information to tell.

First, we have to remember what a mass percentage means (in this particular case):

It is the amount of each element in a compound, and it is calculated as follows:

The addition of the different mass percentages is equal to 100%.

In this case, we have the percentage of one of the elements of the compound, we can make the respective subtraction:

Then, the answer is that the iodine mass percentage is 86.4%

Answer

By adding water (H2O)

Explanation

In this reaction, water is a product, adding the product will favour the reverse reaction, which is the formation of more Co(H2O)6^2+.

Explanations:

• We will follow Hess's Law of Constant Heat Summation:

(that states that if a reaction occurs in more than one route, then the the total enthalpy change for the reaction is the sum of all changes.)

For reaction :

this can be expressed as :