Land's Bend sells wide variety of outdoor equipment and clothing: The company sells both through mail order and via the internet: Random samples of sales receipts were studied for mail-order sales and internet sales, with the total purchase being recorded for each sale random sample of 17 sales receipts for mail-order sales results in mean sale amount of $70.60 with standard deviation of 521.75. A random sample of 9 sales receipts for internet sales results in mean sale amount of $87.30 with standard deviation of S18.75 . Using this data, find the 99 % confidence interval for the true mean difference between the mean amount of mail-order purchases and the mean amount of internet purchases: Assume that the population variances are not equal and that the two populations are normally distributed.
Step of 3 : Find the point estimate that should be used in constructing the confidence interval:

Answer:

x:5,x:7

x^2-12x+35

x^2-12x=-35

x^2-12x+6^2=-35+36

(x+6)^2=1

insert a radical anywhere

x+6=1

x=1-6

x=-5. x=5

x=-1-6

x=-7. x=7

The answer of the given question based on the supplementary angle is  the two angles are 58° degrees and 122° degrees.

An angle is a geometric figure that is formed by two rays or lines that share a common endpoint, called the vertex. The rays or lines are called  sides or arms of  angle. Angles are typically measured in the degrees or the radians.

The measure of an angle is determined by the amount of rotation needed to bring one of its sides into coincidence with the other side. A full rotation is 360° degrees, so an angle that is half of a full rotation is 180 degrees, an angle that is a quarter of a full rotation is 90° degrees, and so on.

Let's call the two angles "x" and "y". We know that they are supplementary, which means that their sum is 180° degrees:

x + y = 180

We also know that one angle (let's say "x") is two times the sum of the other angle (y) and 3:

x = 2(y + 3)

Now we can substitute the second equation into the first equation to eliminate "x":

(2(y + 3)) + y = 180

Simplifying the equation, we get:

3y + 6 = 180

Subtracting 6 from both sides, we get:

3y = 174

Dividing both sides by 3, we get:

y = 58

Now that we know "y", we can substitute it back into the equation for "x" to find its value:

x = 2(y + 3) = 2(58 + 3) = 122

Therefore, the two angles are 58° degrees and 122° degrees.

To know more about Equation visit:

https://brainly.com/question/9312365

#SPJ9

Odd coefficients of the polynomial are obtained by multiplying both odd integers.

Even coefficients of the polynomial are obtained by multiplying both even integers.

Even and odd coefficients of the polynomial are obtained by multiplying both odd integers.

Lets take two integer m and n,

If both 'm' and 'n' are odd integers, then the coefficients of the polynomial obtained by multiplying out will be odd.

If both 'm' and 'n' are even integers, then the coefficients of the polynomial obtained by multiplying out will be even.

If one of 'm' and 'n' is even and the other is odd, then the coefficients of the polynomial obtained by multiplying out will be even and odd.

There are no other cases.

The general form of the polynomial obtained by multiplying out a binomial is:

[tex](a+b)^n = nC_0a^n + nC_1a^{(n-1)}b + nC_2a^{(n-2)}b^2 + .....+ nC_n-1ab^{(n-1)} + nC_nb^n[/tex]

where [tex]nC_k[/tex] is a binomial coefficient.

In general, for a polynomial [tex](a+b)^n[/tex], the coefficient of the term of degree k is [tex]nC_k[/tex].

The binomial coefficients are defined as:  [tex]nC_k = n! / (k!\times(n-k)!)[/tex]

for such more question on coefficients of the polynomial

https://brainly.com/question/28077072

#SPJ11

Answer:

Let's denote the first term of the sequence as a, and the common difference between consecutive terms as d.

Then, we know that the fifth term is 5, so:

a + 4d = 5

Similarly, we know that the sixth term is 2.5, so:

a + 5d = 2.5

We can solve this system of equations by subtracting the first equation from the second:

(a + 5d) - (a + 4d) = 2.5 - 5

d = -2.5

Now, we can substitute this value of d into either equation to find the value of a:

a + 4d = 5

a + 4(-2.5) = 5

a - 10 = 5

a = 15

Therefore, the first term of the sequence is 15, and the common difference is -2.5. We can use this to find the value of the second term:

a + d = 15 + (-2.5) = 12.5

Therefore, the second term of the sequence is 12.5.

mark my answer as brainliest

The sampling method used in the study where the sample is chosen by separating all cars by size, and selecting 10 of each size grouping is known as stratified random sampling.

Stratified random sampling is a method of sampling that involves dividing the population into smaller sub-groups known as strata. In this method, each stratum is composed of elements that have similar characteristics.

The strata could be based on demographic characteristics such as age, sex, education, and so on. Once the strata have been created, the next step is to select a sample from each of the strata to make up the final sample. The selection is done randomly, and the number of elements selected from each stratum is proportional to the size of the stratum. This ensures that the sample is representative of the entire population in terms of the different characteristics of the population.

To know more about Stratified random sampling: https://brainly.com/question/14735856

#SPJ11

Step-by-step explanation:

One-hundred-two-and-eighty-one-hundredths can be written as 102.81 in standard form.

The given statement "if we take a simple random sample from a normal distribution, the probability that the sample mean is equal to the population mean is 1 (i.e., 100%)" is false.

The probability that a sample mean is equal to the population mean is actually zero, since any given sample will differ slightly from the population mean due to sampling error. However, as the sample size increases, the sample mean is likely to be close to the population mean, and the probability of it being equal approaches 1 (i.e., 100%).

To explain further, the population mean is the mean of the entire population and is calculated by adding up all the values of the population and dividing them by the total number of individuals in the population. A sample mean, on the other hand, is the mean of a sample taken from the population and can be calculated by adding up the values of the sample and dividing them by the total number of individuals in the sample. Since the sample size is usually smaller than the population size, the sample mean is likely to be slightly different from the population mean due to sampling error.

For more such questions on Probability.

https://brainly.com/question/30653447#

#SPJ11

The seller purchased the product at a cost of 7500 and sold it for 7950, which resulted in a gain of 6%. So, the cost price is 7500.

In business, it is essential to keep track of cost prices and profit margins to ensure profitability. If the selling price is 7950 and the gain is 6%, we can use the following formula to calculate the cost price:

Cost price = Selling price / (1 + Gain%)

Substituting the given values, we get:

Cost price = 7950 / (1 + 0.06)

Cost price = 7500

Therefore, the cost price of the product is 7500, the gain percentage is calculated based on the cost price and not the selling price.

To know more about cost price:

https://brainly.com/question/23064489

#SPJ4

The probability of hitting the black circle is closer to 0 and the probability of hitting the white portion of the target is closer to 1.

What is probability?

Probability refers to the numerical measure of the likelihood or possibility of a specific event taking place. It is a mathematical concept that involves calculating the ratio of the number of desired outcomes to the total number of possible outcomes. Probability ranges from 0 (representing an impossible event) to 1 (representing a certain event), with values in between indicating the degree of likelihood. Probability is widely used in various fields, including mathematics, statistics, science, engineering, finance, and social sciences, to make predictions, analyze data, and make decisions under uncertainty.

Explanation of the given questions :

Part A: The black circle has a radius of 1 unit and its center is the same as that of the square. Therefore, its diameter is 2 units, which is much smaller than the side length of the square, which is 11 units. This means that the area of the circle is much smaller than the area of the square.

Therefore, the probability of hitting the black circle is closer to 0.

Part B: The white portion of the target is the area of the square minus the area of the black circle. The area of the square is [tex]11 x 11 = 121[/tex] square units.

The area of the circle is [tex]\pi \times r^2 = \pi\times 1^2 = \pi[/tex] square units, which is approximately 3.14 square units. Therefore, the area of the white portion of the target is [tex]121 - 3.14 = 117.86[/tex] square units.

Since this is much larger than the area of the black circle, the probability of hitting the white portion of the target is closer to 1.

To know more about probability visit:

brainly.com/question/14016657

#SPJ1

Therefore, the order of the samples from smallest to largest amount (moles) of OY is: Go, Y, Na, Mn.

In order to list the samples in order of the amount (moles) from smallest to largest OY, we need to calculate the number of moles of each element. Let's start with the given samples:Na -[tex]0.10 gY - 0.10 gGo - 0.10 gMn - 0.10 g[/tex]

Now, let's find the number of moles of each element:Na: The molar mass of Na is 22.99 g/mol.Number of moles of Na = mass of Na/molar mass of Na= 0.10 g/22.99 g/mol= 0.00435 molY: The molar mass of Y is 88.91 g/mol.Number of moles of Y = mass of Y/molar mass of Y= 0.10 g/88.91 g/mol= 0.00112 molGo: The molar mass of Go is 118.71 g/mol.Number of moles of Go = mass of Go/molar mass of Go= 0.10 g/118.71 g/mol= 0.00084 molMn: The molar mass of Mn is 54.94 g/mol.

Number of moles of Mn = mass of Mn/molar mass of Mn= 0.10 g/54.94 g/mol= 0.00182 molNow, we can list the samples in order of the amount (moles) from smallest to largest OY:Go (0.00084 mol) < Y (0.00112 mol) < Na (0.00435 mol) < Mn (0.00182 mol)

for such more questions on list the samples

https://brainly.com/question/30319285

#SPJ11

Step-by-step explanation:

[tex]volume = {x}^{3 \\} \\ so \: 1000000 = {x}^{3 \\} \\ x = \sqrt[3]{1000000} \\ x = 100[/tex]

The surface area of the triangular prism is 544 square inches.

A prism is a three-dimensional structure with two bases that are parallel and congruent and joined by lateral faces, which are a series of parallelograms or rectangles. All of the angles between the lateral faces and the bases are equal, and they are perpendicular to one another. The name of the prism is determined by the shape of the bases, such as triangular bases for a triangular prism, rectangular bases for a rectangular prism, and hexagonal bases for a hexagonal prism.

The surface area of the triangular prism is given by the formula:

SA = bh + (b1 + b2 + b3)l

Here, b = 12, h = 8, b1 = 10 + b2 = 10, b3 = 12 and l = 14.

Substituting the values we have:

SA = (12)(8) + (10 + 10 + 12)(14)

SA = 96 + (32)(14)

SA = 544 square inches.

Hence, the surface area of the triangular prism is 544 square inches.

Learn more about prism here:

https://brainly.com/question/12649592

#SPJ1

The answer this riddle is time as it is always in a hurry, constantly moves forward and waits for no one. And time is often represented as being in a high position, such as on a clock or a calendar.

A riddle is a type of puzzle or question that is designed to challenge and engage the mind. It usually presents a seemingly paradoxical or enigmatic situation or description, and the goal is to figure out the hidden meaning or answer through careful thought and analysis.

Riddles can take many different forms, but they often involve wordplay, metaphor, or clever misdirection to lead the solver towards the solution. Riddles have been used for entertainment, education, and even as a means of passing on cultural knowledge and wisdom from one generation to the next.

Learn about riddles here https://brainly.com/question/29320848

SPJ1

Answer:

[tex]2 \sqrt{2(6 + \sqrt{3} )} [/tex]

Step-by-step explanation:

There's your answer.

The point (2,2) may be considered an anomaly and should be investigated further to determine if it is a valid data point or if it should be excluded from the analysis.

The relation of the point (2,2) to the line of best fit can be determined by analyzing the residual value of this point. The residual value is the difference between the actual y-value and the predicted y-value based on the line of best fit. If the residual value is close to zero, then the point lies on the line of best fit. If the residual value is positive, then the actual y-value is higher than the predicted y-value, and if the residual value is negative, then the actual y-value is lower than the predicted y-value.

Unfortunately, the data necessary to determine the residual value of the point (2,2) is not provided in the question. Therefore, it is impossible to determine the exact relation of this point to the line of best fit.

However, we can make some generalizations based on the location of the point relative to the trend of the data.

If the point (2,2) lies close to the line of best fit, with a residual value close to zero, then it can be said that the point follows the trend of the data and is a typical data point. However, if the point lies far away from the line of best fit, with a large positive or negative residual value, then it can be said that the point is an outlier and does not follow the trend of the data.

for such more questions on valid data point

https://brainly.com/question/23447356

#SPJ11

To check if the line drawn is diameter it should be intersected at centre and it must be equidistant from the centre of the circle.

A circle is a closed, two-dimensional object where every point in the plane is equally spaced from a central point. The line of reflection symmetry is formed by all lines that traverse the circle. Additionally, every angle has rotational symmetry around the centre.

To determine if the line Neil drew is an actual diameter of the circle and not just a smaller chord, he can use the following method -

Extend the line on both sides to create two lines that intersect at a point outside the circle.

Use a compass to draw a circle with the same center as the original circle, and with a radius that is greater than half the length of the line Neil drew.

Check if the two lines intersect the circle at two points that are equidistant from the center of the circle.

If they do, then the line Neil drew is an actual diameter of the circle.

If they do not, then the line Neil drew is just a chord.

This method works because a diameter of a circle is the longest chord that passes through the center of the circle.

By extending the line Neil drew and creating two lines that intersect outside the circle, we can compare the distance from the center of the circle to each of the two intersection points with the radius of the circle we drew.

If the distances are equal, then the line Neil drew must be a diameter of the circle.

Therefore, the method to find the actual diameter is explained.

To learn more about circle from the given link

https://brainly.com/question/26594685

#SPJ1

Amy is picking her fall term classes, including probability 101, 102, and 103 so,

Probability refers to potential. A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has included probability to forecast the likelihood of certain events. The degree to which something is likely to happen is basically what probability means.

You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution.

a) the probability that she will get 101

P = [tex]\frac{^1C_1*^1^9C_2}{^2^0C_3}[/tex]

= 171/1140

P = 0.15

probability that she will get 101 = 0.15.

b) the probability that she will get 101 and 102.

P = [tex]\frac{1*1*18}{20!*3!(20-3)!}[/tex]

P = 18/1140

= 0.0158

probability that she will get probability 101 and probability 102 is 0.0158.

c) the probability she will get all three probability courses

P = [tex]\frac{^3C_3}{^2^0C_3}[/tex]

= 1/1140

P = 0.0009

The probability she will get all three probability courses is 0.0009.

Learn more about Probability;

https://brainly.com/question/29714350

#SPJ4

Complete question:

Amy is picking her fall term classes. She needs to fill three time slots, and there are 20 distinct courses to choose from, including probability 101, 102, and 103. She will pick her classes at random so that all outcomes are equally likely.

(a) What is the probability that she will get probability 101?

(b) What is the probability that she will get probability 101 and probability 102?

(c) What is the probability she will get all three probability courses?

Answer:

The answer to your problem is, A. 60%

Step-by-step explanation:

54 of 90 can be written as: [tex]\frac{54}{90}[/tex]

To find percentage, we need to find an equivalent fraction with denominator 100. Multiply both numerator & denominator by 100

[tex]\frac{54}{90} * \frac{100}{100}[/tex]

= [tex]\frac{( 54 * 100)}{90} * \frac{1}{100} = \frac{60}{100}[/tex]

Thus the answer to your problem is, A. 60%

Learn more here:

https://brainly.com/question/20802915

Answer:

x = 60%

Step-by-step explanation:

Let the unknown percentage be x.

We can make an expression using the given information.

[tex]\sf90*\frac{x}{100} =54[/tex]

Solve for x to find the percentage.

[tex]\sf\frac{90x}{100} =54\\90x=54*100\\\\90x=5400\\\\\frac{90x}{90}=\frac{5400}{90}\\\\ x=60[/tex]

Answer: Line PQ is parallel to line LM

Step-by-step explanation:

We can check if they are of equal distance apart by checking if the ratios of the given lines are equal...in other words we must check if LP/PN=MQ/QN

We know that triangle PNQ is inscribed inside triangle LNM

Using the information we have we see that side LP is 18 units, PN is 16 units, MQ is 27, and QN is 24. With this information we can write out LP/PN=MQ/QN and see if it's true.

LP= 18, PN= 16, 18/16= 1.125

MQ= 27, QN=24, 27/24= 1.125

therefore, LP/PN=MQ/QN is true. Making line PQ and line LM parallel.

The theoretical probability of not drawing an "o" is 3/4.

We have,

Each of the letters of the word Colorado are written on a piece of paper and then put into a bag.

Here, The word "Colorado" has 8 letters, including 2 "o"s.

Therefore, the probability of drawing an "o" is,

P = 2/8

P = 1/4

Hence, The probability of not drawing an "o" is the complement of this probability is,

1 - 1/4 = 3/4.

Therefore, the theoretical probability of not drawing an "o" is 3/4.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ12

Answer:

[tex]2 \sqrt{61} \: in[/tex]

Step-by-step explanation:

Use the Pythagorean theorem (assume, that the length of hypotenuse is x):

[tex] {x}^{2} = {10}^{2} + {12}^{2} = 100 + 144 = 244[/tex]

[tex]x > 0[/tex]

[tex]x = \sqrt{244} = 2 \sqrt{61} [/tex]

Answer:

The answer to your problem is 53 in ^2

Hope it helps

As per the unitary method, the cost of one skirt is sh 20 and the cost of one blouse is sh 550.

Let us assume that the cost of one skirt is x and the cost of one blouse is y. We can now form two equations based on the given information.

Equation 1: 5x + 3y = 1750

This equation represents the cost of 5 skirts and 3 blouses together, which is given as sh 1750.

Equation 2: 3x + y = 850

This equation represents the cost of 3 skirts and 1 blouse, which is given as sh 850.

To apply the unitary method here, we can first find the value of one skirt by dividing equation 1 by 5, and then find the value of one blouse by subtracting 3 times the value of one skirt from equation 2.

Dividing equation 1 by 5, we get:

x + (3/5)y = 350

Subtracting 3 times the value of one skirt from equation 2, we get:

y = 850 - 3x

y = 850 - 3(350/5)

y = 550

So, we have found the value of y, which is the cost of one blouse. Now, we can substitute this value of y in equation 1 to find the value of x, which is the cost of one skirt.

5x + 3(550) = 1750

5x + 1650 = 1750

5x = 100

x = 20

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

Answer:

331/2

Step-by-step explanation:

5 1/2= 11/2

3 1/2 = 7/2

11/2x7/2x6=115 1/2 = 331/2

Answer:

115.5 cm^3

Step-by-step explanation:

Volume=LengthxWidthxHeight

The values from the diagram are 3.5, 6, and 5.5

Multiply!

3.5x6x5.5=115.5

The probability that Emme answers exactly 3 questions correctly is 0.1961.

Since each question has four answer choices and only one is correct, the probability of Emme randomly guessing the correct answer for each question is 1/4 = 0.25. Emme needs to answer exactly 3 out of the 9 questions correctly, so we use the binomial distribution with n = 9 and p = 0.25 to calculate the probability:

P(X = 3) = (9 choose 3) * (0.25)^3 * (0.75)^6

Using a calculator, we get:

P(X = 3) = 0.1961

Therefore, the probability that Emme answers exactly 3 questions correctly is 0.1961.

To know more about probability refer here:

https://brainly.com/question/30034780#

#SPJ11

Answer:

$32.50

Step-by-step explanation:

20% * y = 6.5 =>

y =6.5 ÷ 20% =

6.5 ÷ (20 ÷ 100) =

(100 × 6.5) ÷ 20 =

650 ÷ 20 =

32.5

Percentage of 20% of what number = 6.5?

20% × ? = 6.5

20% of 32.5 = 6.5

Therefore , the solution of the given problem of graphs comes out to be a = [P² * G * Ms / [tex](4\pi ^2* Mp)]^(1/3)[/tex]

Graphs are used by theoretical coordinate points physicists to analytically and graphically present assertions rather than values. Typically, a graph point shows the relationship between several distinct objects. A graph is a particular kind of pas de container construction composed of groups and lines. The borders, also known as the channels, should be joined with glue.

Here,

According to Kepler's third law, one can determine the connection between a planet's orbital period and its separation from a star by:

=> P² = (4π² / GM) * a³

where P denotes the orbit's duration in years, a denotes the semi-major axis in astronomical units (AU), G denotes gravity's constant, and M denotes the star's mass in solar masses.

If we rewrite this equation, we obtain:

=> a = [P² * G * Ms / [tex](4\pi ^2* Mp)]^(1/3)[/tex]

We can rewrite this equation as follows since our goal is to estimate the distance from the sun in AU based on the mass of the planet in relation to the sun:

=> a = [P² * G * Ms / [tex](4\pi ^2* Mp)]^(1/3)[/tex]

where Mp is the mass of the planet in relation to the sun and Ms is the mass of the sun.

To know more about graphs visit:

https://brainly.com/question/11950136

#SPJ1

The line-plot of the the given data 9 3/4, 10 1/2, 9 1/4, 10 1/4, 11, 10 1/4, 9 1/2 that displays the lengths of the books on the booom shelf is attached.

What is line plot?

A line plot is a type of graph that represents the kind of data representation. It is line plot or a line chart shows the data in a visual form or visual representation. The graph is plotted with help of straight lines and points or dots. The x-axis is represented by straight lines or the it is labelled about the data. The y-axis is represented by the dots or frequency of the data. It is generally used to represent the small data set. This graph uses symbols to show or represent the frequency of the observations.

The data represented here is 9 3/4, 10 1/2, 9 1/4, 10 1/4, 11, 10 1/4, 9 1/2

we can make the frequency table using the above values, after which it can be plotted on the line-plot graph.

1-9 1/4--1 dot

2-9 1/2--1 dot

3-9 1/2--1 dot

4-10 1/4-2 dots

5-10 1/2--1 dot

6-11--1 dot

To know more about line-plot, visit:

https://brainly.com/question/30612947

#SPJ1

Attached is a line-plot of the given data showing the lengths of the books on the book shelf: 9 3/4, 10 1/2, 9 1/4, 10 1/4, 11, 10 1/4, and 9 1/2.

An example of a graph that shows this sort of data representation is a line plot. The data is presented visually in the form of a line plot or a line chart. With the aid of straight lines, points, or dots, the graph is drawn. Straight lines or labels that describe the data are used to depict the x-axis. The dots or frequency of the data are used to depict the y-axis. It often serves as a representation for a tiny group of data. The frequency of the observations is shown or represented by symbols on this graph.

9 3/4, 10 1/2, 9 1/4, 10 1/4, 11, 10 1/4, and 9 1/2 are the numbers shown.

Using the aforementioned variables, we can create the frequency table, which can then be plotted on the line-plot graph.

1-9 1/4--1 dot

2-9 1/2--1 dot

3-9 1/2--1 dot

4-10 1/4-2 dots

5-10 1/2--1 dot

6-11--1 dot

To know more about line-plot, visit:

brainly.com/question/30612947

#SPJ9

Answer:

Step-by-step explanation:

To find out how many more hours Jason worked than Sheldon, we need to subtract the number of hours Sheldon worked from the number of hours Jason worked:

Jason's hours = 14/3

Sheldon's hours = 25/6

Jason's hours - Sheldon's hours = (14/3) - (25/6)

To subtract fractions, we need to have a common denominator, which in this case would be 6:

(14/3) - (25/6) = (28/6) - (25/6) = 3/6

Simplifying the result, we get:

3/6 = 1/2

Therefore, Jason worked 1/2 more hours than Sheldon.

Jason worked 1/3 more hours than Sheldon.

To find out how many more hours Jason worked than Sheldon, we need to subtract the number of hours Sheldon worked from the number of hours Jason worked.

Jason worked for 14/3 hours, which can be simplified to 4 and 2/3 hours. Sheldon worked for 25/6 hours, which can be simplified to 4 and 1/6 hours.

Subtracting the hours Sheldon worked from the hours Jason worked, we get: 4 and 2/3 - 4 and 1/6 = 2/3 - 1/6 = 1/3.

Therefore, Jason worked 1/3 more hours than Sheldon.

https://brainly.com/question/28211246

#SPJ2

Answer:

=(x+9)(x+5)

Step-by-step explanation: