Leah uses 20 ounces of beeswax to make 6 identical small candles. How many ounces of beeswax does leah need to make 15 more small candles

Answer:

Same equation just using the assocaitive property

Step-by-step explanation:

For example, 8 + (2 + 3) = (8 + 2) + 3 = 13

Hope this helps! =D

Answer:

mean: 101 (add all the numbers then divide by 7)

mode: 102 (the most frequent number in the set)

median: 102 (the number in the middle of the set)

range: 20 (the difference between the largest and smallest number)

Mean = 101

Mode = 102

Median = 102

Range = 20

MEAN: Add up all the numbers, then divide by how many numbers there are.

102 + 107 + 99 + 102 + 111 + 95 + 91 = 707

707 ÷ 7 = 101

MODE: Arrange all numbers in order from lowest to highest or highest to lowest and then count how many times each number appears in the set. The one that appears the most is the mode.

91,95,99,102,102,107,111

MEDIAN: Arrange the numbers from smallest to largest. If the amount of numbers is odd, the median is the middle number. If it is even, the median is the average of the two middle numbers in the list.

91,95,99,102,102,107,111

RANGE: Subtract the lowest number from the highest number

111 - 91 = 20

The method that uses an arithmetic mean to forecast the next period is "moving averages".

The method that uses an arithmetic mean to forecast the next period is the "moving averages" method.

In this method, the average of the past observations is calculated, and this average is used as the forecast for the next period.

The number of past observations used in the calculation of the moving average depends on the specific variant of the method being used.

Learn more about arithmetic mean

brainly.com/question/13000783

#SPJ11

Systematic sampling is a type of probability sampling method where every nth item in a population is selected for inclusion in the sample.

For example, if a researcher wanted to select a systematic sample of 100 students from a school population of 1,000 students, they would randomly select one of the first 10 students (1/10th of the population) and then select every 10th student thereafter until they reach 100. Systematic sampling is often used when the population is too large to enumerate and it is more efficient than simple random sampling. However, it is important to ensure that the sampling interval is not biased in any way, otherwise the sample may not be representative of the population.

Learn about more inclusion here:

https://brainly.com/question/22302092

#SPJ11

Systematic sampling is a relatively easy and quick method of sampling, as it requires less effort and time than other methods such as stratified or cluster sampling.

The starting point is truly random, and that the interval selected does not create any bias in the sample.

Systematic sampling is a method of selecting a sample from a population using a system or a pattern.

It involves selecting every nth item or person from the population after a random starting point has been determined.

To perform systematic sampling, the first item or individual in the sample is randomly selected from the population.

Then, the remaining items or individuals are selected at regular intervals, such as every 10th or 20th item or individual.

The interval is calculated by dividing the population size by the desired sample size.

A researcher wants to select a sample of 100 from a population of 1000, the interval would be. [tex]1000/100 = 10.[/tex]

The researcher would randomly select the first item or individual from the population, and then select every 10th item or individual thereafter until the desired sample size is reached.

For similar questions on Systematic sampling

https://brainly.com/question/28505229

#SPJ11

Step-by-step explanation:

x = -4     ( the value of the x-coordinate of the vertex is the axis of symmetry for normal up or down opening parabolas)

One machine can produce 600,000 nails in one hour.

Finding the total number of nails produced by the three machines in a minute and dividing that number by three to obtain the number of nails produced by a single machine in a minute are the first two steps in the solution to this problem.

The number of nails produced by a single machine in an hour can then be calculated by multiplying that number by 60.

Now, we add up the total number of nails produced during :

(15 + 16 + 45 + 48 + 55 + 59 + 3) / 7 = 30

To find the number of nails produced by one machine in one hour, we multiply by 60: 10,000 x 60 = 600,000

To know more about multiplying, here

brainly.com/question/30875464

#SPJ4

To find the inverse of a function, we need to swap the positions of x and y and then solve for y. In other words, we replace f(x) with y and then solve for x.

x = 5y - 6

Next, we'll solve this equation for y:

x + 6 = 5y

y = (x + 6)/5

The measure of angle A and B is 29° and 61° respectively

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle.

sin(tetha) = opp/hyp

tan(tetha) = opp/adj

cos(tetha) = adj/hyp

The opposite is 6 and the adjascent = 11

Therefore tan (tetha) = 11/6 = 1.833

tetha = tan^-1( 1.833)

= 61°( nearest degree)

The sum of angle in a triangle is 180°

therefore,

angle A = 180-( 61+90)

= 180-151

= 29°

therefore the measure of angle A and B is 29° and 61° respectively.

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

Answer:

[tex]c + 15 > 24[/tex]

[tex]c > 9[/tex]

The additional amount will be more than $9.

The length of the third side between 2.1 inches and 8.3 inches (exclusive) could be a valid length for the third side of the triangle.

In a triangle, the length of any side must be less than the sum of the lengths of the other two sides and greater than the difference between the lengths of the other two sides.

We can apply this rule to find the possible lengths of the third side of the triangle, given that the lengths of the two sides are 5.2 inches and 3.1 inches.

Here we have

The lengths of two sides of a triangle are 5.2 inches and 3.1 inches

Let's denote the length of the third side as x. Then, we have:

3.1 + 5.2 > x > 5.2 - 3.1

8.3 > x > 2.1

Therefore, the length of the third side x must be greater than 2.1 inches and less than 8.3 inches.

We can write this as an inequality:

2.1 < x < 8.3

Therefore,

The length of the third side between 2.1 inches and 8.3 inches (exclusive) could be a valid length for the third side of the triangle.

Learn more about Triangles at

https://brainly.com/question/12943336

#SPJ1

To verify if older adults and middles ages people spend less time on social media, Justin can use the Analysis of variance (ANOVA) test.

ANOVA is used to compare means across two or more groups. Justin can use this test on the different category of younger adults, middle-aged and older adult. This test is done when there is statistically significant difference between the group of samples.

Justin can utilize post-hoc tests (such as Tukey's HSD and Bonferroni) to identify whether particular groups are statistically different from one another if an ANOVA shows a significant difference.

To know more about ANOVA test, visit,

https://brainly.com/question/30127764

#SPJ4

Answer:

B

B

A

B

D

C

Step-by-step explanation:

5. B

65 = teachers

15 = principal

65/80 = 81.25

If there's is a total of 900 people, find 81.25 (number of teachers)

=731.25

=731

6. B

The best graphical representation for the teacher's data would be a histogram. A histogram is a graph that displays the distribution of continuous data, such as the number of students who prefer a particular subject. It shows the frequency of each interval, or bin, of values.

A stem-and-leaf plot is typically used for small datasets and displays each data point. A circle graph, also known as a pie chart, is used to show how different parts make up a whole and is not appropriate for showing the distribution of preferences among the students. A box plot, also known as a box-and-whisker plot, is used to display the distribution of data, but it may not be as useful for showing the specific frequencies of each preference as a histogram would be.

7) A

There's an image for it I attached

8) B

The correct circle graph that represents the data in the table is option B) circle graph titled New York City visitor's transportation, with five sections labeled walk 40 percent, bicycle 8 percent, car service 15 percent, bus 10 percent, and subway 27 percent.

In the given table, the number of visitors for each type of transportation is given. To create a circle graph, we need to convert the given numbers to percentages. Then, we can use these percentages to determine the angle of each section in the circle graph.

Using the given numbers, we can calculate the percentage of visitors for each transportation type as follows:

Walk: (120/300) x 100 = 40%

Bicycle: (24/300) x 100 = 8%

Car Service: (45/300) x 100 = 15%

Bus: (30/300) x 100 = 10%

Subway: (81/300) x 100 = 27%

Option B) correctly represents these percentages in a circle graph.

9) D

The best prediction about the scoops of ice cream the college will need is option D) The college will have about 1,440 students who prefer ice cream.

To make this prediction, we need to use the information given in the table and assume that the entire student body has the same preferences as the sample of 225 students.

According to the table, 81 out of 225 students prefer ice cream.

To estimate the number of students who prefer ice cream in the entire student body of 4,000 students, we can use proportions.

81/225 = x/4000

Multiplying both sides by 4000, we get:x = 81/225 x 4000 = 1,440

Therefore, the college will have about 1,440 students who prefer ice cream, and they will need to prepare that many scoops.

10) C

The drive-thru that typically has more wait time is option C) Super Fast Food, because it has a larger median.

The median is the middle value when a set of data is arranged in order. In this case, the median wait time for Super Fast Food is 12 minutes, and the median wait time for Burger Quick is 15.5 minutes.

This means that half of the customers at Super Fast Food waited less than 12 minutes, while half of the customers at Burger Quick waited less than 15.5 minutes.

Therefore, the wait time at Super Fast Food is typically shorter than at Burger Quick.

The mean, on the other hand, is influenced by outliers or extreme values, and it is not as robust a measure of central tendency as the median. Therefore, we cannot determine which drive-thru typically has more wait time based on the mean alone.

Answer:

[tex]f(x) = 500( {.89}^{x} )[/tex]

The sine function that describes the child's apparent distance from the center of the merry-go-round is d(t) = 5.3 sin(2π/15 * t)

To write a sine function that describes the child's apparent distance from the center of the merry-go-round as a function of time t, we can start by finding the amplitude, period, and phase shift of the motion.

Amplitude:

The amplitude of the motion is half the diameter of the merry-go-round, which is 10.6/2 = 5.3 feet. This is because the child moves back and forth across the diameter of the merry-go-round.

Period:

The period of the motion is the time it takes for the child to complete one full cycle of back-and-forth motion, which is equal to the time it takes for the merry-go-round to complete one full rotation.

From the given information, the child completes 8 rotations in 120 seconds, so the period is T = 120/8 = 15 seconds.

Phase shift:

The phase shift of the motion is the amount of time by which the sine function is shifted horizontally (to the right or left).

In this case, the child starts at one end of the diameter and moves to the other end, so the sine function starts at its maximum value when t = 0. Thus, the phase shift is 0.

With these values, we can write the sine function that describes the child's apparent distance from the center of the merry-go-round as:

d(t) = 5.3 sin(2π/15 * t)

where d is the child's distance from the center of the merry-go-round in feet, and t is the time in seconds. The factor 2π/15 is the angular frequency of the motion, which is equal to 2π/T.

Learn more about sine function on:

https://brainly.com/question/30243373

#SPJ1

The distance between A and B is approximately 8.06 units.

In order to find the distance, d, of AB, we need to use the distance formula. The distance formula gives us the distance between two points in a coordinate plane. It is given as:$$d = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}$$ where (x1, y1) and (x2, y2) are the coordinates of the two points in question.

In this case, A and B are the two points for which we need to find the distance. Let's assume that the coordinates of A are (x1, y1) and the coordinates of B are (x2, y2).

Then the distance formula becomes:

$$d = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}$$

$$d = \sqrt{((8 + 4) - 2)^2 + ((5 - 1) - 3)^2}$$

$$d = \sqrt{(10 - 2)^2 + (4 - 3)^2}$$

$$d = \sqrt{(8)^2 + (1)^2}$$

$$d = \sqrt{64 + 1}$$

$$d \approx \sqrt{65}$$

$$d \approx 8.06$$

Therefore, the distance between A and B is approximately 8.06 units.

For more such questions on distance, click on:

https://brainly.com/question/26550516

#SPJ8

Answer:

The answer is 3

Step-by-step explanation:

x×108=y

x×2²×3³=y

3×108=324

Answer:

Yo, when you adding or subtracting mixed numbers with the same denominators, the numerators stay chill, they don't change, bro.

But the denominators, they also stay the same, man. It's like keeping things consistent, ya feel me? So the answer is A, dude. Numerators stay put, denominators stay put. It's all good vibes, bro! ✌️

fraction wise, a whole is always simplified to 1, so

[tex]\cfrac{4}{4}\implies \cfrac{1000}{1000}\implies \cfrac{9999}{9999}\implies \cfrac{17}{17}\implies \text{\LARGE 1} ~~ whole[/tex]

so, we can say the whole of the players, namely all of them, expressed in fourth is well, 4/4, that's the whole lot,  and we also know that 3/4 of that is 12, the guys who chose the bottle of water

[tex]\begin{array}{ccll} fraction&value\\ \cline{1-2} \frac{4}{4}&p\\[1em] \frac{3}{4}&12 \end{array}\implies \cfrac{~~ \frac{4 }{4 } ~~}{\frac{3}{4}}~~ = ~~\cfrac{p}{12}\implies \cfrac{~~ 1 ~~}{\frac{3}{4}} = \cfrac{p}{12}\implies \cfrac{4}{3}=\cfrac{p}{12} \\\\\\ (4)(12)=3p\implies \cfrac{(4)(12)}{3}=p\implies 16=p[/tex]

The center of gravity is located 96.7 inches aft of the datum.

To determine the location of the center of gravity (CG) of the system, we need to calculate the moment of each weight about the datum, and then divide the sum of the moments by the total weight of the system.

The moment of each weight is equal to its weight multiplied by its distance from the datum. In this case:

Moment of weight a = 140 pounds x 17 inches = 2,380 inch-pounds

Moment of weight b = 120 pounds x 110 inches = 13,200 inch-pounds

Moment of weight c = 85 pounds x 210 inches = 17,850 inch-pounds

The total weight of the system is:

Total weight = weight a + weight b + weight c = 140 + 120 + 85 = 345 pounds

Therefore, the location of the CG can be calculated as follows:

CG location = (Moment of weight a + Moment of weight b + Moment of weight c) / Total weight

CG location = (2,380 + 13,200 + 17,850) / 345

CG location = 33,430 / 345

CG location = 96.7 inches aft of datum

As a result, the center of gravity is 96.7 inches aft of the datum.

To know more about the Datum, here

https://brainly.com/question/15138411

#SPJ4

Answer: The answer is A.

Step-by-step explanation: Because I am smart don't underestimate me.

Answer:

C

Step-by-step explanation: (look at attachment)

3x + 4 = -2x -2

By looking at the y-intercepts, you automatically know the answer is C.

The y-intercept of the pink line is 4 because of 3x + 4.

The y-intercept of the blue line is -2, because of -2x - 2.

The 21st term of the sequence 3, 8, 13, 18, .. is 103

To find the indicated term in the sequence, we first need to identify the pattern followed by the sequence. It appears that each term is obtained by adding 5 to the previous term. So, we can write the general formula for the nth term of the arithmetic sequence as

a(n) = a(1) + (n-1)d

where a(1) is the first term of the sequence, d is the common difference, and n is the term number.

In this case, we have:

a(1) = 3 (the first term)

d = 5 (the common difference)

To find the 21st term, we substitute n = 21 in the formula:

a(21) = a(1) + (21-1)d

a(21) = 3 + 20(5)

a(21) = 103

Learn more about arithmetic sequence here

brainly.com/question/16671654

#SPJ4

When x is 2, the value of the expression is 9.

An algebraic expression is a mathematical phrase that contains one or more variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. It can also contain exponents, roots, and trigonometric functions.

Algebraic expressions are used to represent mathematical relationships and solve problems in a wide range of fields, including physics, engineering, finance, and statistics. They can be used to model real-world phenomena and to make predictions based on data.

Algebraic expressions can be simplified by combining like terms and using mathematical rules and properties. They can also be evaluated by substituting values for the variables and simplifying the expression. Solving equations involving algebraic expressions often involves manipulating the expression to isolate a variable and find its value.

When x is 2, the value of the expression 12/4+3(8−x)-12 can be found by substituting 2 for x and simplifying the expression:

12/4 + 3(8 - 2) - 12

= 3 + 3(6) - 12

= 3 + 18 - 12

= 9

Therefore, when x is 2, the value of the expression is 9.

To know more about expression visit:

https://brainly.com/question/15813344

#SPJ1

The complete question is :

When x is 2, what is the value of the expression 12/4+3(8−x)-12?

Answer:

2.36 miles

Step-by-step explanation:

radius, r = 3 miles∅ = 45°Length of an arc = ∅/360 * 2πr= 45/360 * 2 * 3.14 * 3= 2.36 miles

The means of two or more populations being equal is determined by a statistical approach for the ANOVA procedure. Option B is correct.

The ANOVA (Analysis of Variance) procedure is a statistical method used to determine whether there is a significant difference between the means of two or more groups. To statistically test the equality of means ANOVA uses F-tests.

The repeated-measures ANOVA is a two-stage process that is described as an analysis of dependencies. This test is used to prove an assumed cause-effect relationship between variables. The conditions that must be met for the results of an ANOVA are Independence, Random Sampling, Large Sample Size, and Normality.

To learn more about the ANOVA :

https://brainly.com/question/30127764

#SPJ4

The correct statement regarding the middle 50% of the data-set is given as follows:

C. The box, from 41 to 56.

A box and whisker plots shows these five features from a data-set, listed as follows:

The box, from the 25th percentile of 41 to the 75th percentile of 56, shows the middle 50% of the data-set.

More can be learned about box plots at https://brainly.com/question/12343132

#SPJ1

Answer:

x = 4√5 ≈ 8.94 (2 d.p.)

y = 8√5 ≈ 17.89 (2 d.p.)

Step-by-step explanation:

To find the values of x and y, use the Geometric Mean Theorem (Leg Rule).

The altitude drawn from the vertex of the right angle perpendicular to the hypotenuse separates the hypotenuse into two segments. The ratio of the hypotenuse to one leg is equal to the ratio of the same leg and the segment directly opposite the leg.

[tex]\boxed{\sf \dfrac{Hypotenuse}{Leg\:1}=\dfrac{Leg\:1}{Segment\;1}}\quad \sf and \quad \boxed{\sf \dfrac{Hypotenuse}{Leg\:2}=\dfrac{Leg\:2}{Segment\;2}}[/tex]

From inspection of the given right triangle RST:

Substitute the values into the formulas:

[tex]\boxed{\dfrac{20}{y}=\dfrac{y}{16}}\quad \sf and \quad \boxed{\dfrac{20}{x}=\dfrac{x}{4}}[/tex]

Solve the equation for x:

[tex]\implies \dfrac{20}{x}=\dfrac{x}{4}[/tex]

[tex]\implies 4x \cdot \dfrac{20}{x}=4x \cdot \dfrac{x}{4}[/tex]

[tex]\implies 80=x^2[/tex]

[tex]\implies \sqrt{x^2}=\sqrt{80}[/tex]

[tex]\implies x=\sqrt{80}[/tex]

[tex]\implies x=\sqrt{4^2\cdot 5}[/tex]

[tex]\implies x=\sqrt{4^2}\sqrt{5}[/tex]

[tex]\implies x=4\sqrt{5}[/tex]

Solve the equation for y:

[tex]\implies \dfrac{20}{y}=\dfrac{y}{16}[/tex]

[tex]\implies 16y \cdot \dfrac{20}{y}=16y \cdot \dfrac{y}{16}[/tex]

[tex]\implies 320=y^2[/tex]

[tex]\implies \sqrt{y^2}=\sqrt{320}[/tex]

[tex]\implies y=\sqrt{320}[/tex]

[tex]\implies y=\sqrt{8^2\cdot 5}[/tex]

[tex]\implies y=\sqrt{8^2}\sqrt{5}[/tex]

[tex]\implies y=8\sqrt{5}[/tex]

The statement which  is true for the quadrilateral is B.

To dilate a figure by a scale factor of 2, each point of the original figure is multiplied by 2.

So the coordinates of each vertex of A'B'C'D' are twice the coordinates of the corresponding vertex of ABCD.

The coordinates of A' are (4,10), B' are (4,4), C' are (8,6), and D' are (8,12).

To determine which statements are true, we can compare the angles and side lengths of the two quadrilaterals:

A) None of the answers apply. This may be a valid answer, but we should check the other options before concluding that none of them apply.

B) The angles of Quadrilateral ABCD and Quadrilateral A'B'C'D' are the same. This is true because dilation does not change angles. The corresponding angles of the two quadrilaterals are congruent.

C) The side lengths of Quadrilateral ABCD and Quadrilateral A'B'C'D' are not the same. We can see this by calculating the length of each side of both quadrilaterals.

Therefore, the correct answer is B.

Learn more about Quadrilateral on:

https://brainly.com/question/23935806

#SPJ1

The decimal that represents the fraction of the $30.00 Maggie spent is 0.6.

Now, let's talk about decimals. Decimals are a way of expressing parts of a whole number in a fraction of 10. For example, 0.5 is the same as 1/2. In your situation, Maggie spent $18.00 out of $30.00. To figure out what decimal represents the fraction of the $30.00 Maggie spent, we need to divide the amount she spent by the total amount she had.

So, we can write this as a fraction:

$18.00 / $30.00

To turn this fraction into a decimal, we divide the numerator (top number) by the denominator (bottom number) using long division or a calculator.

$18.00 / $30.00 = 0.6

Another way to say this is that Maggie spent 60% of the money she had in her wallet.

To know more about decimal here

https://brainly.com/question/9543292

#SPJ4