locations in which flammable gases or vapors may be present in the air in quantities sufficient to produce explosive or ignitable mixtures are identified as?

Answers

Answer 1

The answer is hazardous locations.

Locations in which flammable gases or vapors may be present in the air in quantities sufficient to produce explosive or ignitable mixtures are identified as hazardous locations. These locations include areas where flammable liquids, gases, or vapors may be present, such as chemical plants, refineries, paint booths, and storage facilities. It is important to identify and properly label these hazardous locations to ensure that proper precautions are taken to prevent explosions or fires.

Learn more about hazardous: https://brainly.com/question/28432670

#SPJ11

Answer 2

These locations are identified as hazardous or potentially explosive environments. It is important to follow proper safety protocols and guidelines when working in these areas to prevent any accidents or incidents.

Workplace safety protocols are an underappreciated but essential part of your safety program. That’s because they help guide your workers through complex tasks that could easily go awry, ensuring that they always know what to do.

Of course, writing safety protocols to ensure safe behavior is an art in and of itself. Here’s a quick look at how to write protocols effectively.

Workplace safety protocols, often called safety procedures, are step-by-step safety plans guiding employees through the safe performance of a given workplace procedure. As such, the protocol refers to both the process itself and the internal document put together by an organization.

All safety protocols will include a list of hazards associated with a given work task. The EHS team will then use a risk assessment matrix to assign a risk factor to each hazard. From there, the EHS team will break the process into steps to ensure each step is handled in a way that avoids or mitigates hazards associated with a given step.

learn more about safety protocols here:

https://brainly.com/question/11763983

#SPJ11


Related Questions

in what flight condition must an aircraft be placed in order to spin

Answers

In order for an aircraft to spin, it must be placed in a specific flight condition known as an aggravated stall. This occurs when the angle of attack of the aircraft is too high and the airflow over the wings becomes disrupted, causing a loss of lift.

As a result, one wing may stall before the other, creating an unequal lift distribution that can cause the aircraft to enter a spin. Pilots must be trained to recognize and recover from this dangerous situation in order to prevent accidents.
In order to spin, an aircraft must be placed in a specific flight condition known as a "stall." A stall occurs when the angle of attack is too high, causing a reduction in lift and an increase in drag. To initiate a spin, the aircraft must be in a stalled condition and have a yawing motion (rotation around the vertical axis). This combination of factors causes one wing to generate more lift than the other, resulting in the spinning motion.

Visit here to learn more about aircraft:

brainly.com/question/28246952

#SPJ11

In order for an aircraft to spin, it must be in a stall condition. A stall occurs when the angle of attack (AOA) is too high, causing the airflow over the wings to separate and the lift generated by the wings to decrease. When the AOA reaches the critical angle of attack, the airflow can no longer create enough lift to keep the aircraft in the air, and it begins to descend.

During a spin, one wing drops while the other rises, and the aircraft rotates around its vertical axis. This occurs when one wing continues to generate lift while the other does not, causing the aircraft to roll and yaw simultaneously.It is important to note that not all aircraft are designed to spin, and attempting to spin an aircraft that is not certified for it can be dangerous. Pilots must receive proper training and follow the aircraft manufacturer's guidelines to perform spins safely.Overall, an aircraft must be in a stall condition to spin. This occurs when the angle of attack is too high and the airflow over the wings separates, causing the aircraft to lose lift and enter a descending motion while rotating around its vertical axis.

For more such question on vertical axis

https://brainly.com/question/29774083

#SPJ11

The Weld Center Vertices option is available for which of the
following Fill Hole Mode settings?

Answers

As a general overview, the term "Weld Center Vertices" typically refers to a feature or option that is used in 3D modeling or computer-aided design (CAD) software.

What is the feature used for?

This feature is usually used in conjunction with a "Fill Hole" mode, which is a tool that is used to fill in holes or gaps in 3D models.

When the "Weld Center Vertices" option is enabled in a "Fill Hole" mode, the software will attempt to connect the vertices or points around the hole by creating a new surface or face that is centered on the vertices. This can be useful for creating a more uniform and seamless 3D model, particularly when dealing with complex shapes or irregular surfaces.

Read more about 3D models here:

https://brainly.com/question/29306858

#SPJ1

by purchasing software that gathers data and predicts trends in the most popular genres without any extra programming, the library can purchase the books that people will read

Answers

By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed purchasing decisions on the books that people are likely to read. This eliminates the need for extra programming and ensures that the library's collection stays relevant and in-demand. The software can analyze data such as user preferences, browsing history, and book ratings to generate accurate predictions on which books will be popular in the future. This ultimately saves the library time and money by avoiding the purchase of books that may not be well-received by their audience. Overall, investing in such software can greatly benefit the library's collection development strategy and help them better serve their community's reading needs.
By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

To learn more about software, click here:

brainly.com/question/985406

#SPJ11

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed decisions when acquiring new books.

This approach ensures that the library's collection remains up-to-date and relevant to the interests of its patrons, ultimately increasing the likelihood that people will read the selected books. Furthermore, this software eliminates the need for extra programming, saving time and resources.Such data-driven decisions also allow the library to maximize its budget, as it can focus on purchasing titles that are more likely to be borrowed and enjoyed by the community. Additionally, understanding trends in popular genres can assist the library in creating targeted promotions and events, further engaging patrons and fostering a love for reading.In summary, utilizing software that gathers data and predicts trends in popular genres is an efficient and cost-effective way for a library to maintain a relevant and engaging collection. This approach benefits both the library and its patrons by ensuring a diverse and appealing selection of books that cater to the community's interests.

For such more question on fostering

https://brainly.com/question/31458527

#SPJ11

The plaintiff properly filed an action in federal district court for breach of a partnership agreement. At the conclusion of the presentation of the evidence to the jury by both parties, the defendant filed a motion for judgment as a matter of law, contending that the evidence was insufficient as a matter of law to establish the existence of a partnership. The judge denied this motion. After the jury rendered a verdict in favor of the defendant, the plaintiff filed a motion for judgment as a matter of law 25 days after the entry of the judgment.
Should the court grant the plaintiff's motion?
Answers:
A. No, because the plaintiff did not file a motion for judgment as a matter of law prior to the submission of the case to the jury.
B. No, because the motion was not filed within 10 days of the entry of the judgment.
C. Yes, because the defendant filed a motion for judgment as a matter of law at the conclusion of the presentation of the evidence to the jury by both parties.
D. Yes, because the court rejected the defendant's motion for judgment as a matter of law at the conclusion of the presentation of the evidence.

Answers

Yes, because the court rejected the defendant's motion for judgment as a matter of law at the conclusion of the presentation of the evidence.

The plaintiff properly filed an action in federal district court for breach of a partnership agreement. At the conclusion of the presentation of the evidence to the jury by both parties, the defendant filed a motion for judgment as a matter of law, contending that the evidence was insufficient as a matter of law to establish the existence of a partnership. The judge denied this motion. After the jury rendered a verdict in favor of the defendant, the plaintiff filed a motion for judgment as a matter of law 25 days after the entry of the judgment.

Learn more about defendant's here

https://brainly.com/question/30736002

#SPJ11

a dial indicators can be used to measure which two of the following: (a) diameter, (b) length, (c) roundness, (d) straightness, (e) surface roughness, and (f) thickness?

Answers

A dial indicator can be used to measure (c) roundness and (d) straightness. These tools are useful for assessing the deviation of a surface from its ideal shape, such as determining how round a cylindrical object is or how straight a flat surface is.

A dial indicator can be used to measure the (b) length and (d) straightness of an object.A dial indicator is a precision measurement tool that uses a plunger or probe to make contact with the object being measured. It is typically used in manufacturing and engineering to ensure that parts and components are within specified tolerances.While a dial indicator can provide useful information about the surface roughness, diameter, roundness, and thickness of an object, it is not the most appropriate tool for measuring these characteristics. Other measurement tools, such as micrometers, calipers, and profilometers, are better suited for these tasks.

Learn more about plunger here

https://brainly.com/question/31269511

#SPJ11

Assume:

A = 1101 0011 1111 0110

B = 0110 1101 1101 1110

Write the series of operations necessary to pack A into B (and store the result in C), where the 8 lowest order bits of B are stored in the 8 highest order bits of C, and the 8 highest order bits of A are stored in the 8 lowest order bits of C.

Answers

To pack A into B and store the result in C, the following operations can be performed.

What is the explanation for the above response?

Perform a logical shift right on A by 8 bits, which will result in 0000 0000 1101 0011.Perform a logical shift left on B by 8 bits, which will result in 1011 0110 1101 1110.Perform a logical OR operation between the results of step 1 and step 2, which will result in 1011 0110 1111 1110.Perform a logical shift left on A by 8 bits, which will result in 0000 0000 0000 0000.Perform a logical shift right on B by 8 bits, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 4 and step 5, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 3 and step 6, which will result in C = 1011 0110 1111 1110 0000 0000 0110 1101.

Learn more about operations at:

https://brainly.com/question/9697567

#SPJ1

true or false. all else being equal, eccentricity in loading improves the ability of a line weld to support the load.

Answers

False. All else being equal, eccentricity in loading reduces the ability of a line weld to support the load. Eccentricity refers to the deviation of the applied load from the centerline of the weld, which creates a bending moment that can lead to failure or deformation of the weld. A weld that is loaded concentrically, or along its centerline, is better able to support the load without experiencing these detrimental effects.

False. Eccentricity in loading refers to the application of a load that is not centered on the axis of the weld. In general, eccentric loading is not desirable as it creates bending moments on the weld, which can lead to increased stresses and potential failureThe ability of a line weld to support a load is influenced by various factors, including the quality of the weld, the material properties, and the design of the joint. The load capacity of a weld can be improved by proper design, such as increasing the weld size or using stronger materials.Therefore, it cannot be said that eccentricity in loading improves the ability of a line weld to support the load. In fact, it is generally considered detrimental to the weld's ability to support load. Welds are designed to handle axial loading, and eccentric loading can lead to premature failure of the weld. Hence, it is important to avoid eccentric loading whenever possible and ensure that the weld is properly designed and fabricated to handle the intended loads.
False. Eccentricity in loading refers to the application of a load away from the central axis, which can create additional stresses on a line weld. This may reduce the ability of the line weld to support the load effectively, as it could lead to a higher risk of failure under the uneven distribution of stress.

To learn more about eccentricity click on the link below:

brainly.com/question/30752283

#SPJ11

The statement ''all else being equal, eccentricity in loading improves the ability of a line weld to support the load is true because distribution enhances the ability of the line weld to support the load effectively.

Eccentricity refers to the distribution of the load away from the central axis, which can help in better load distribution. This improved distribution enhances the ability of the line weld to support the load effectively.

Learn more about load distribution: https://brainly.com/question/31521596

#SPJ11

This manipulator is used to establish a field width for the value that follows it: field_width set field setw iomanip None of these

Answers

The manipulator used to establish a field width for the value that follows it is setw from the iomanip library in C++. It allows you to specify the number of characters that should be used for the output of the value.

For example, if you want to output a value with a field width of 5, you would use set w(5). This will ensure that the value is formatted with 5 characters, adding spaces as necessary to achieve the desired width. So the correct option in this case would be "set field setw iomanip". The term "set field set w iomanip" does not make sense in this context.
The manipulator used to establish a field width for the value that follows it is "setw". This term is part of the iomanip library in C++. So, the correct answer is "setw". The other terms mentioned in the question, such as "field_width", "set field", and "setw ioman ip", are not relevant to the context of the question.

Visit here to learn more about iomanip library:

brainly.com/question/28343948

#SPJ11

The manipulator in question is called "setw" and it is a part of the "iomanip" library in C++. option c is correct.

This manipulator is used to set the field width for the value that follows it. The value can be a string, integer, or any other data type.

The purpose of setw is to make the output more readable and organized by aligning the data in columns. For example, if you are printing a table with multiple columns, you can use setw to set the width of each column so that the data is aligned and easy to read.

The syntax for using setw is as follows:

cout << setw(10) << "Hello";

In this example, setw(10) sets the field width to 10 characters for the string "Hello". This means that "Hello" will be printed with a width of 10 characters, even if it is shorter than that. If the string is longer than 10 characters, it will be truncated to fit within the allotted space.

Overall, setw is a useful manipulator for formatting output in C++. It helps to make the output more readable and organized, which is important when dealing with large amounts of data.

For such more question on setw

https://brainly.com/question/30436807

#SPJ11

Note: The complete question would de as bellow,

This manipulator is used to establish a field width for the value that follows it:

a)field_width

b)set field

c)setw

d)iomanip

e)None of these

lateral buckling is inhibited by the rigid frame action of the arches and the horizontal elements linking the two arches to each other. b. roll-thru buckling is partly inhibited by the combined effect of the angled suspenders and the deadweight of the roadbed. c. roll-thru buckling is partly inhibited by the road bed, which attaches to the arch at about the quarter points of the arch. d. tension elements in the roadbed are all the horizontal force required to achieve full arch action over the full length of the arches. e. roll-through buckling is inhibited by the rigid frame action of the arches and the horizontal elements linking the two arches to each other.

Answers

Lateral buckling is inhibited by the rigid frame action of the arches and the horizontal elements linking the two arches to each other. This provides stability and support for the structure.

Roll-thru buckling is partly inhibited by the combined effect of the angled suspenders and the deadweight of the roadbed, as well as by the roadbed attaching to the arch at about the quarter points of the arch. This attachment helps distribute the load and prevent buckling. Tension elements in the roadbed provide the horizontal force required to achieve full arch action over the full length of the arches, ensuring stability. Finally, roll-through buckling is also inhibited by the rigid frame action of the arches and the horizontal elements linking the two arches to each other, maintaining the overall structural integrity.

Learn more about Lateral buckling: https://brainly.com/question/31519659

#SPJ11

The statement that best describes the buckling mechanisms of an arch bridge is e. roll-through buckling is inhibited by the rigid frame action of the arches and the horizontal elements linking the two arches to each other.

Arch bridges are designed to support loads primarily through axial compression forces. However, they are also susceptible to different types of buckling under certain loading conditions. Roll-through buckling is one of the most critical types of buckling in arch bridges, where the arch rolls or twists laterally due to insufficient lateral bracing, resulting in instability and possible collapse.To inhibit roll-through buckling, arch bridges typically incorporate horizontal elements that link the two arches, creating a rigid frame action that can resist lateral forces. The angled suspenders also provide additional bracing to reduce the lateral displacement of the arches. In contrast, tension elements in the roadbed primarily resist the vertical forces that act on the bridge, such as the weight of the traffic and the weight of the bridge itself.In summary, the rigid frame action of the arches and the horizontal elements linking the two arches together are critical factors that inhibit roll-through buckling in an arch bridge.

To learn more about horizontal click on the link below:

brainly.com/question/13742824

#SPJ11

what are the components of the crude oil mixture ?

Answers

Crude oil is a complex mixture of hydrocarbons, which are molecules composed of hydrogen and carbon atoms. The specific components of crude oil can vary depending on the source and the refining process, but the major components include:

1. Alkanes: These are straight or branched-chain hydrocarbons that are fully saturated with hydrogen atoms. They are the most common component of crude oil.

2. Cycloalkanes: These are hydrocarbons that contain one or more rings of carbon atoms. They are also fully saturated with hydrogen atoms.

3. Aromatic hydrocarbons: These are hydrocarbons that contain a ring of carbon atoms with alternating double bonds. They are unsaturated and have a distinctive odor.

4. Resins: These are complex mixtures of hydrocarbons that are often dark in color and sticky in texture.

5. Asphaltenes: These are high-molecular-weight hydrocarbons that are often solid at room temperature. They are the heaviest and most complex component of crude oil.

The exact composition of crude oil can vary widely depending on the source and the refining process. Refineries use various processes to separate and purify the different components of crude oil, which are then used to produce a wide range of products, including gasoline, diesel fuel, lubricants, and plastics.
Crude oil is a mixture of comparatively volatile liquid hydrocarbons (compounds composed mainly of hydrogen and carbon), though it also contains some nitrogen, sulfur, and oxygen. Those elements form a large variety of complex molecular structures, some of which cannot be readily identified.

electronic components are much more likely to fail than electromechanical components. (True or False)

Answers

True. Electronic components are more likely to fail than electromechanical components. This is because electronic components rely on the flow of electrons, which can be affected by factors such as voltage spikes, temperature changes, and moisture.

Electromechanical components, on the other hand, use physical movement to perform their function, which is generally more reliable than electronic components.
if electronic components are much more likely to fail than electromechanical components. The statement is False. The failure rate of electronic and electromechanical components depends on various factors like quality, operating conditions, and usage. It is not correct to generalize that electronic components are more likely to fail than electromechanical components.

Visit here to learn more about Electronic components:

brainly.com/question/1128968

#SPJ11

The statement that electronic components are much more likely to fail than electromechanical components is generally true. Electronic components are devices that rely on the flow of electrons through them, while electromechanical components use a combination of electrical and mechanical processes to operate.

There are several reasons why electronic components are more likely to fail. One major factor is that they are often more complex than electromechanical components, and thus have more potential points of failure. Electronic components also tend to generate more heat than electromechanical components, which can cause them to degrade and fail over time. Additionally, electronic components are more susceptible to damage from electrical surges, static electricity, and other forms of electrical interference.Despite these challenges, electronic components are still widely used in many applications because of their numerous advantages over electromechanical components. They are typically smaller, lighter, and more efficient than electromechanical components, and can be integrated more easily into complex systems. Electronic components are also capable of performing a wider range of functions than electromechanical components, making them essential for many modern technologies.In summary, while electronic components may be more prone to failure than electromechanical components, their advantages often make them the preferred choice for many applications. It is important to take appropriate measures to protect electronic components from damage and ensure their longevity, such as using proper grounding and surge protection measures, and following best practices for storage and handling.

For such more question on electromechanical

https://brainly.com/question/1699327

#SPJ11

building techniques using steel played an important role in promoting the decentralization of the urban area. true or false

Answers

It is true that building techniques using steel played an important role in promoting the decentralization of the urban area.

Building techniques using steel played an important role in promoting the decentralization of the urban area. Steel is a versatile and durable material that allows for the construction of high-rise buildings, bridges, and other structures that can support large populations. Steel allows for the construction of taller buildings with larger floor areas, which leads to more efficient land use. This, in turn, encourages the spreading out of urban areas, as businesses and residents can be accommodated in smaller footprints. This has enabled cities to expand vertically, rather than horizontally, which helps to reduce urban sprawl and preserve natural areas.

Additionally, steel construction is often faster and more cost-effective than traditional building methods, making it an attractive option for developers looking to build in urban areas.  Steel's strength and durability enable the creation of longer bridges and tunnels, connecting urban areas with their surrounding regions and promoting further decentralization. Overall, the use of steel in building techniques has been instrumental in promoting decentralization and sustainable urban development.

Learn more about urban sprawl here:

brainly.com/question/30636543
#SPJ11

The statement "Building techniques using steel played an important role in promoting the decentralization of the urban area" is true because this helped to decentralize urban areas by creating new opportunities for growth and expansion outside of the city center.

Building techniques using steel allowed for taller and stronger structures to be built, which made it possible to construct buildings in areas that were previously considered too crowded or expensive for development. Additionally, steel buildings were often cheaper and faster to construct than traditional brick or stone structures, making them a more attractive option for developers looking to build in suburban or rural areas.

Learn more about the Building techniques: https://brainly.com/question/622077

#SPJ11

a parallel rlc circuit contains a resistor r = 1 ω and an inductor l = 2 h. select the value of the capacitor so that the circuit is critically damped

Answers

To design a critically damped parallel RLC circuit with a resistor R = 1Ω and an inductor L = 2H, you need to select the value of the capacitor C according to the following formula: C = 1 / (4 * R * L) Plug in the values for R and L: C = 1 / (4 * 1 * 2) C = 1 / 8 So, you need to select a capacitor with a value of 1/8 F (0.125 F) for the circuit to be critically damped.

To calculate the value of the capacitor required to make the parallel RLC circuit critically damped, we need to use the formula for the damping ratio, which is given by: ζ = R / (2√(L/C)) where R is the resistance, L is the inductance, C is the capacitance, and ζ is the damping ratio. For critically damped behavior, ζ = 1, which means: 1 = R / (2√(L/C)) Substituting the given values of R = 1 Ω and L = 2 H, we get: 1 = 1 / (2√(2/C)) Squaring both sides and rearranging, we get: C = 8/9 F Therefore, the value of the capacitor required to make the parallel RLC circuit critically damped is 8/9 F.

Learn more about circuit here-

https://brainly.com/question/27206933

#SPJ11

To make a parallel RLC circuit critically damped, the value of the capacitor should be chosen so that the damping factor is equal to 1. In a parallel RLC circuit, the damping factor can be calculated using the formula:

damping factor = R / (2 * √(L * C))

Given that R = 1 Ω and L = 2 H, we can rearrange the formula to find the value of the capacitor (C):

C = (R^2) / (4 * L)

Plugging in the values, we get:

C = (1^2) / (4 * 2) = 1 / 8

Therefore, the value of the capacitor needed for the circuit to be critically damped is C = 1/8 F (farads).

Learn more about critically damped: https://brainly.com/question/31519346

#SPJ11

discuss how the operator uses knowledge of the factors that affect abrasion to control the polishing sequence of an amalgam restoration, a composite restoration, and a gold restoration.

Answers

The operator uses knowledge of the factors that affect abrasion to control the polishing sequence of an amalgam restoration, a composite restoration, and a gold restoration in the following ways:

1. Amalgam Restoration: The operator uses knowledge of the hardness and roughness of the amalgam material to select the appropriate polishing instruments and sequence. The polishing sequence typically involves the use of coarse abrasives, such as diamond burs, to remove any rough surfaces, followed by finer abrasives, such as rubber cups and points, to achieve a smooth and polished surface. The operator must also consider the presence of any marginal ridges or overhangs that may require additional attention during the polishing process.

2. Composite Restoration: The operator uses knowledge of the composite material's relative softness and tendency to wear during polishing to select the appropriate polishing instruments and sequence. The polishing sequence typically involves the use of fine abrasives, such as diamond polishing pastes, to achieve a high gloss finish. The operator must also consider any surface irregularities or contouring that may require additional attention during the polishing process.

3. Gold Restoration: The operator uses knowledge of the gold alloy's relative hardness and resistance to wear during polishing to select the appropriate polishing instruments and sequence. The polishing sequence typically involves the use of progressively finer abrasives, such as pumice, tripoli, and rouge, to achieve a high luster finish. The operator must also consider any surface irregularities, such as porosity or pits, that may require additional attention during the polishing process.

In all three types of restorations, the operator must also consider factors such as the shape and size of the polishing instruments, the speed and pressure of the polishing handpiece, and the use of cooling water or lubricating agents to minimize heat generation and reduce the risk of damage to the restoration or surrounding tissues. By carefully controlling the polishing sequence and techniques, the operator can achieve a smooth, polished surface that is both aesthetically pleasing and functionally effective.

evolution processes illustrate the tension that exists between individual’s efforts to promote change and ""customers"" preferences and habits related to existing (previously adopted) solutions. TRUE OR FALSE?

Answers

The statement "evolution processes illustrate the tension that exists between individual’s efforts to promote change and customers' preferences and habits related to existing (previously adopted) solutions" is TRUE.

Evolution processes often involve tension between individuals seeking to promote change and the preferences and habits of customers who have previously adopted existing solutions. This tension can slow down or impede the process of change, but ultimately it is necessary for the evolution of new and better solutions. It occurs because individuals may push for innovations or improvements, while customers may resist change due to their familiarity and comfort with existing solutions. This dynamic creates a balance between innovation and maintaining customer satisfaction.

Learn more about evolution: https://brainly.com/question/29574340

#SPJ11

True. Evolution processes illustrate the tension that exists between individuals' efforts to promote change and customers' preferences and habits related to existing (previously adopted) solutions.

Evolution processes do indeed illustrate the tension that exists between individuals trying to bring about change and the preferences and habits of customers who have already adopted existing solutions. This tension can be seen in the constant struggle between innovation and tradition, as well as between individual creativity and the need to conform to established norms and expectations. Ultimately, the success of any new idea or product depends on finding the right balance between these competing forces and striking a chord with customers who are willing to embrace change while still staying true to their own values and preferences.
Evolution is a process that results in changes in the genetic material of a population over time. Evolution reflects the adaptations of organisms to their changing environments and can result in altered genes, novel traits, and new species.

learn more about Evolution processes here:

https://brainly.com/question/21320908

#SPJ11

You are troubleshooting an application problem and want to eliminate faulty memory as a source of the problem. Which command do you use?Mdsched.exe. Mds.chace. Mds.con

Answers

If you are troubleshooting an application problem and suspect that faulty memory may be the cause of the issue, you can use the "mdsched.exe" command to check for any memory problems.

"mdsched.exe" command runs the Windows Memory Diagnostic tool, which will test your computer's memory for any errors or issues. Once the test is complete, it will provide you with a report that you can use to determine whether faulty memory was indeed the source of the problem. It is important to eliminate faulty memory as a possible cause before moving on to other troubleshooting steps, as memory issues can often be the root cause of many application problems.

To troubleshoot an application problem and eliminate faulty memory as a source of the issue, you should use the command "mdsched.exe". This is done as follows:
1. Open the Run dialog box by pressing the Windows key + R.
2. Type "mdsched.exe" into the dialog box and hit Enter.
3. The Windows Memory Diagnostic tool will open, offering options to restart now and check for problems or check for problems the next time you start your computer.
4. Choose the appropriate option to run the memory diagnostic test.

This command, mdsched.exe, will run the Windows Memory Diagnostic tool, which is designed to detect and diagnose any issues with your computer's memory. By using this tool, you can confirm whether or not faulty memory is contributing to your application problem.

Learn more about  Windows Memory Diagnostic tool (WMD) here:

brainly.com/question/22895405

#SPJ11

Hi! To eliminate faulty memory as a source of an application problem, you should use the command "mdsched.exe".

This command launches the Windows Memory Diagnostic tool, which checks your computer's memory for any issues that might be causing the problem with your application.

Learn more about application problem: https://brainly.com/question/13818690

#SPJ11

A suction line accumulator is used to ensure that liquid refrigerant enters the compressor.True or False

Answers

False. A suction line accumulator is used to ensure that only vapor refrigerant enters the compressor, while any liquid refrigerant is stored in the accumulator until it can evaporate and turn into vapor.
False. A suction line accumulator is used to prevent liquid refrigerant from entering the compressor. Its purpose is to collect and temporarily store any excess liquid refrigerant, allowing only vapor refrigerant to pass through to the compressor.False.

A suction line accumulator is a component used in refrigeration systems to prevent liquid refrigerant from entering the compressor. Its purpose is to collect and store any liquid refrigerant that may be present in the suction line and vaporize it before it reaches the compressor. The accumulator accomplishes this by having a baffle inside the accumulator that separates the liquid refrigerant from the refrigerant vapor. The refrigerant vapor is then allowed to exit the accumulator and continue on to the compressor, while the liquid refrigerant is stored at the bottom of the accumulator until it vaporizes and can also exit.If liquid refrigerant were to enter the compressor, it could cause damage to the compressor due to the compressor being designed to compress vapor refrigerant and not liquid refrigerant. Liquid refrigerant in the compressor could also lead to reduced efficiency and cooling capacity of the refrigeration system.herefore, the correct statement is that a suction line accumulator is used to prevent liquid refrigerant from entering the compressor, not to ensure that it enters the compressor.

To learn more about evaporate  click on the link below:

brainly.com/question/30589597

#SPJ11

The statement "A suction line accumulator is used to ensure that liquid refrigerant enters the compressor is False because liquid refrigerant and returning it to the system as vapor, ensuring only vapor refrigerant is sent to the compressor.

A suction line accumulator is used to prevent liquid refrigerant from entering the compressor. It protects the compressor by collecting excess liquid refrigerant and returning it to the system as vapor, ensuring only vapor refrigerant is sent to the compressor.

The answer is False.

https://brainly.com/question/14847591

#SPJ11

the surface force maintenance and material management program is governed by what instruction

Answers

The Surface Force Maintenance and Material Management Program is governed by the Naval Sea Systems Command (NAVSEA) Instruction 4790.8.

The policies and procedures outlined in the Surface Force Maintenance and Material Management Program are established by NAVSEA Instruction 4790.8. This instruction outlines the policies and procedures for managing the maintenance and material readiness of surface ships and their associated systems.

The program includes the planning, execution, and documentation of maintenance and material management activities to ensure the safety, reliability, and mission readiness of the ship. The instruction also provides guidance for the proper management and control of shipboard material, including inventory control, procurement, and disposal. The Surface Force Maintenance and Material Management Program is essential for maintaining the operational effectiveness of surface ships and ensuring the safety of the crew and equipment.

Learn more about reliability here:

brainly.com/question/29706405

#SPJ11

The Surface Force Maintenance and Material Management Program, also known as the 3M program, is governed by the Naval Sea Systems Command (NAVSEA) Instruction 4790.8B. This instruction provides guidelines and procedures for the management, maintenance, and inspection of surface ship equipment and systems.

The purpose of the 3M program is to ensure that surface ships are maintained at the highest level of readiness and operational capability.The instruction outlines the responsibilities of the ship's commanding officer, department heads, and maintenance personnel, as well as the procedures for conducting preventive maintenance, corrective maintenance, and material management. The program also includes a system of documentation and reporting to track the status of maintenance and repairs.The 3M program is critical to the operational readiness of the Navy's surface fleet. It ensures that ships are properly maintained and ready to respond to any mission, from routine patrols to combat operations. The program is regularly updated to incorporate new technologies and equipment, and to address any emerging maintenance issues. Overall, the 3M program plays a vital role in ensuring the safety and effectiveness of the Navy's surface ships.

For such more question on patrols

https://brainly.com/question/13975187

#SPJ11

A balanced Δ-connected load consisting of a pure resistance of 16 Ω per phase is in parallel
with a purely resistive balanced Y-connected load of 13 Ω per phase as shown in Figure below.
The combination is connected to a three-phase balanced supply of 346.41-V rms (line-to-line)
via a three-phase line having an inductive reactance of j3 Ω per phase. Taking the phase
voltage Van as reference, determine
a) The current, real power, and reactive power drawn from the supply.
b) The line-to-neutral and the line-to-line voltage of phase a at the combined load terminals.

Answers

The three-phase line voltage is given as 346.41 Vms

The real power drawn from the supply is given as 19.2kW

What is Line Voltage?

"Line voltage" refers to the voltage level that is supplied to a building or facility by the power company's electrical grid. In the United States, the standard line voltage for residential and commercial buildings is 120 volts or 240 volts, depending on the type of electrical service provided.

Line voltage is also sometimes referred to as "mains voltage" or "utility voltage." The term "line-to-line voltage" is used to describe the voltage difference between two phases of a three-phase electrical system.

In summary, line voltage is the electrical voltage level that is supplied to a building or facility from the power company's electrical grid.

Read more about line voltage here:

https://brainly.com/question/29802224

#SPJ1

in handling equipment selection the ratio of dead weight to payload should be minimized?

Answers

When it comes to handling equipment selection, it is important to consider the ratio of dead weight to payload. The ratio refers to the weight of the equipment itself compared to the maximum weight it can carry, or its payload.

It is generally recommended that this ratio be minimized, meaning that the equipment should be as lightweight as possible while still being able to handle the necessary payload. This is because a high ratio of dead weight to payload can have a number of negative consequences. First, it can reduce the overall efficiency of the equipment, as more energy will be required to move a heavier piece of machinery. This can lead to increased fuel consumption and operating costs. Additionally, a higher ratio can make the equipment more difficult to maneuver, potentially leading to safety concerns or damage to the surrounding environment.

Overall, minimizing the ratio of dead weight to payload is important for ensuring that handling equipment is as efficient and effective as possible. By selecting lightweight equipment that is well-suited to the specific needs of the task at hand, it is possible to maximize productivity while minimizing costs and potential safety issues.

Learn more about dead weight here:

brainly.com/question/14820567

#SPJ11

Yes, in handling equipment selection, it is important to minimize the ratio of dead weight to payload.

This is because dead weight refers to the weight of the equipment itself, which does not contribute to the payload (the actual weight that the handling equipment is carrying). If the dead weight is high compared to the payload, then the equipment may not be as efficient and cost-effective as it could be. Therefore, it is important to choose equipment that has a low ratio of dead weight to payload in order to optimize performance and maximize productivity.

Learn more about handling equipment selection: https://brainly.com/question/14367881

#SPJ11

advanced control system and matlab
help in q2

Answers

The overall transfer function of the system with the compensator is: G_ol(s) = 10.5 * (1 + 0.2s) / (s(s+2)(s+5)(1+0.035s)(1+5.6s))

How the explain the transfer function

The transfer function of the overall with the lag-lead compensator can be written as:

= Kp * Kz * G(s) * G_c(s)

Substituting the given values and the values of G(s) and G_c(s), we get:

= 10.5 * (1 + 0.2s) / (s(s+2)(s+5)(1+0.035s)(1+5.6s))

Thus, the required lag-lead compensator is:1.75 * (1 - 5.67s) / (1 + 0.2s)

The overall transfer function of the system with the compensator is:

10.5 * (1 + 0.2s) / (s(s+2)(s+5)(1+0.035s)(1+5.6s))

learn more about system on

https://brainly.com/question/545314

#SPJ1

with common control wiring, the power source for the control circuit is separate from the power circuit wiring. true or false?

Answers

It is true that with common control wiring, the power source for the control circuit is separate from the power circuit wiring. The reason for this is to ensure that the control circuit and the power circuit are kept separate to prevent any interference or damage.

In common control wiring, the power source for the control circuit is separate from the power circuit wiring. This separation is important to maintain the safety and functionality of the system.  The control circuit, which manages the operation of devices like switches and relays, requires a lower voltage compared to the power circuit wiring that delivers the main electrical power to equipment or loads. It is used to send signals to various components to control their functions, while the power circuit is responsible for providing the necessary power to operate the equipment.

By keeping these two circuits separate, any potential issues with the control circuit will not affect the power circuit, ensuring that the equipment continues to function as intended. Additionally, separating the control circuit from the power circuit wiring also helps to ensure the safety of the operators and anyone else working with or around the equipment.

Learn more about circuit wiring here:

brainly.com/question/12499011

#SPJ11

True. With common control wiring, the power source for the control circuit is separate from the power circuit control wiring. This is important for safety and to ensure that the control circuit is not affected by any issues or fluctuations in the power circuit.

Learn more about control wiring: https://brainly.com/question/26064065

#SPJ11

A two-way is normally used as an off/on switch and to control _____.

Answers

A two-way switch is generally used as an on/off switch to control one light or electrical device from two locations.

It is to help the user access te electronic devices from multiple locations.

Thus, a two-way switch is very useful.

Learn more about two-way switch: https://brainly.com/question/12689877

#SPJ11

A two-way is normally used as an off/on switch and to control the flow of electrical power or circuitry between two points.

A switch is a simple device that makes or breaks a circuit. A switch can perform mainly two functions- ON, by closing its contacts, or fully OFF, by opening its contacts. When contacts are closed, it creates a path for the current to flow, and vice-versa, an open contact will not allow the current to flow. In electrical wiring, switches are most commonly used to operate electric lights, permanently connected appliances or electrical outlets.

In 1884, John Henry Holmes invented the quick break light switch. His technology ensured the internal contacts moved apart quickly enough to deter the electric arching which could be a fire hazard and shorten the switch’s lifespan. This quick break technology is still employed in today’s domestic and industrial light switches.

The most commonly available and used electrical switches in our homes is the one-way switch. But there also exists two-way switch, though not commonly used. In its working, the main difference between them is the number of contacts they each have. The one-way switch has two contacts and the two-way switch has three contacts. In a two-way switch, there are two, one-way switches combined in one. One of the terminals can be connected to either of the two, but not both at the same time.

learn more about  off/on switch here:

https://brainly.com/question/12011312

#SPJ11

for overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. group of answer choices a - 20%, b - 80% a - 50%, b - 50% a - 10%, b - 90% a - 0%, b - 100%

Answers

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. The correct answer is a - 10%, b - 90%. This means that the rise time is the time it takes for the transient response to go from 10% to 90% of the step change voltage.

It is important to note that the rise time is dependent on the damping ratio of the system, which affects the speed at which the transient response reaches its steady state value.For overdamped or critically damped systems, the rise time is the time it takes for the transient response to go from a of the step change voltage to b of the step change voltage, where a and b are specific percentages of the final steady-state value.The correct answer is a - 10%, b - 90%.In an overdamped or critically damped system, the response of the system to a step change in voltage is slower than in an underdamped system, and there is no oscillation in the response. The rise time is defined as the time it takes for the output to rise from 10% to 90% of its steady-state value.For example, if the steady-state value of the output is 100 volts, the rise time for an overdamped or critically damped system would be the time it takes for the output to rise from 10 volts to 90 volts (i.e., 10% to 90% of 100 volts).Overall, the rise time is an important characteristic of the transient response of a system, as it determines how quickly the system responds to changes in input and reaches its steady-state value.For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 10% (a) of the step change voltage to 90% (b) of the step change voltage. So, the correct answer is: a - 10%, b - 90%.

To learn more about critically damped click on the link below:

brainly.com/question/13161950

#SPJ11v

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 0% of the step change voltage to 100% of the step change voltage.

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage, where a is 0% and b is 100%.

Therefore, the answer would be a - 0%, b - 100%.

Learn more about voltage: https://brainly.com/question/31519346

#SPJ11

if one wished to operate at a larger current of 8.1 a while maintaining the rod temperature within the safety limit, the convection coefficient would have to be increased by increasing the velocity of the circulating air. what is the recommended convection coefficient for this case?

Answers

Unfortunately, I cannot provide a recommended convection coefficient for this case as the information provided is insufficient to calculate it. However, it is stated that to operate at a larger current of 8.1 A while maintaining the rod temperature within the safety limit, the convection coefficient would have to be increased by increasing the velocity of the circulating air.

This means that increasing the velocity of the air would help in dissipating the heat generated by the larger current and prevent the rod from overheating.It is not possible to provide a specific recommended convection coefficient for this case without additional information about the specific application and operating conditions. The convection coefficient is dependent on a variety of factors, including the geometry of the system, the velocity of the air, and the temperature difference between the rod and the surrounding air.However, in general, increasing the velocity of the circulating air can help to increase the convection coefficient and improve heat transfer from the rod to the surrounding environment. This can help to maintain the rod temperature within a safe operating range while allowing for a larger current of 8.1 A.In practical applications, the recommended convection coefficient may be specified by industry standards or guidelines, or may be determined through experimentation or simulation. It is important to ensure that the convection coefficient is properly calculated and applied to ensure safe and reliable operation of the system.To determine the recommended convection coefficient for operating at a larger current of 8.1 A while maintaining the rod temperature within the safety limit, we need more information about the specific system, materials, and safety limits. However, in general, increasing the velocity of the circulating air can help enhance the convection coefficient, leading to better heat dissipation and keeping the temperature within the desired range.

To learn more about recommended  click on the link below:

brainly.com/question/31467789

#SPJ11

) Describe the steps that you would go through in order to design a control system for
maintaining the pH of the liquid in a stirred tank (see Figure Q. I - 2) at a desired value. What questions must you resolve? Develop a feedback and a feedforward control
configuration for this system

Answers

The following steps are commonly used when designing a control system to keep the pH of a liquid in a stirred tank at a desired level:

Determine the target pH level and the permitted pH range: Identify the proper sensor: Choose an appropriate control algorithm: Choose a reliable actuator: The control parameters should be determined: Put the control system in place: Analyze and tweak the system:

How to explain the system

The following issues must be addressed in order to develop a control system for keeping a liquid's pH in a stirred tank at a desired level:

What pH range and ideal pH value are acceptable?

What kind of sensor is needed to determine the liquid's pH?

What kind of actuator is necessary to change the liquid's pH?.

Which control algorithm ought to be employed?

What are the system's proper control parameters?

How ought the control system to be put into practice?

How will the system be evaluated and modified to make sure it functions properly?

Learn more about systems on

https://brainly.com/question/545314

#SPJ4

the sum of the numbers (1ae)16 and (bbd)16 is

Answers

The sum and product of each hexadecimal number are for a D6A, 1A3F88 for b 216BB, 1438D5A for c ACD8F, B051FA2E for d E0BAA8, 92A26ABAE4

Here is how you find the sum and product of each of these pairs of hexadecimal numbers.

a) (1AE)16, (BBC)16
Sum: 1AE + BBC = D6A (in hexadecimal)
Product: 1AE * BBC = 1A3F88 (in hexadecimal)

b) (20CBA)16, (A01)16
Sum: 20CBA + A01 = 216BB (in hexadecimal)
Product: 20CBA * A01 = 1438D5A (in hexadecimal)

c) (ABCDE)16, (1111)16
Sum: ABCDE + 1111 = ACD8F (in hexadecimal)
Product: ABCDE * 1111 = B051FA2E (in hexadecimal)
d) (E0000E)16, (BAAA)16
Sum: E0000E + BAAA = E0BAA8 (in hexadecimal)
Product: E0000E * BAAA = 92A26ABAE4 (in hexadecimal)

Learn more about hexadecimal numbers:https://brainly.com/question/11109762

#SPJ11

Give me three types of control systems

Answers

There are various types of control systems, but here are three common types:

1. Open-loop control system: In this type of system, the control action is determined solely by the input signal. The output of the system is not compared to the desired output or reference signal. An example of an open-loop control system is a washing machine with a timer that runs for a fixed duration regardless of the state of the clothes inside.

2. Closed-loop or feedback control system: In this type of system, the output of the system is measured and compared to the desired output, and the control action is adjusted accordingly. This type of system uses feedback to continuously adjust the output to match the desired value. An example of a feedback control system is a thermostat that measures the temperature of a room and adjusts the heating or cooling system to maintain a desired temperature.

3. Digital control system: In this type of system, the control variables are processed digitally. The input and output signals are sampled and converted to digital signals, and then the control algorithm is executed using digital processing techniques. This type of system is commonly used in modern industrial control systems and robotics.
Three basic types of control systems are available to executives:
(1) output control,
(2) behavioral control, and
(3) clan control.

As Apple’s CEO, the late Steve Jobs orchestrated innovations that revolutionized all of these industries except which?Multiple Choicemusicsmartphonesdigital publishingcable televisiontablet computing

Answers

The industry that Steve Jobs did not revolutionize through his innovations as Apple's CEO was cable television.

As Apple's CEO, the late Steve Jobs orchestrated innovations that revolutionized all of these industries except cable television. The industries that he did revolutionize include music, smartphones, digital publishing, and tablet computing. He revolutionizes the music industry with the iPod and iTunes, smartphones with the iPhone, digital publishing with the iPad, and tablet computing with the iPad as well.

Learn more about Steve Jobs: https://brainly.com/question/31506774

#SPJ11

A parallel circuit has a resistance values of 1,200 ohm, 2,200 ohm, and 3,000 ohm. If the circuit has a total current flow of 0.25 Ampre. How much current flows through each of the resistors

Answers

In a parallel circuit, the voltage across each resistor is the same, while the current through each resistor is different.

To find the current through each resistor, we can use Ohm's Law:

I = V / R

where I is the current, V is the voltage, and R is the resistance.

Since the voltage is the same across each resistor in a parallel circuit, we can use the total current and the resistance values to find the current through each resistor.

Let's start with the first resistor:

I1 = V / R1
I1 = 0.25 / 1200
I1 = 0.00020833 A

Now, let's find the current through the second resistor:

I2 = V / R2
I2 = 0.25 / 2200
I2 = 0.00011364 A

Finally, let's find the current through the third resistor:

I3 = V / R3
I3 = 0.25 / 3000
I3 = 0.00008333 A

Therefore, the current flowing through the first, second, and third resistors are 0.00020833 A, 0.00011364 A, and 0.00008333 A, respectively.
Other Questions
Which of the following is NOT a true statement of a quality public address system? The system should have an alternative power source.A The system should broadcast to every student and staff member in all areas of the school.B The system should not be accessible from multiple locations.C The system should be accessible from a multitude of locations. Label the net for the cylinder. Then find the surface area of the cylinder. Give your answer in terms of and as a decimal number rounded to the nearest tenth. A nurse is caring for a client who is in labor and has an epidural anesthesia block. The client's blood pressure is 80/40 mmHg and the fetal heart rate is 140/min. Which of the followign is the priority nursing action?A. Elevate the client's legs.B. Monitor vital signs every 5 min.C. Notify the provider.D. Place the client in a lateral position. Conclude an entry barriers essay A wire, of length L = 3. 8 mm, on a circuit board carries a current of I = 2. 54 A in the j direction. A nearby circuit element generates a magnetic field in the vicinity of the wire of B = Bxi + Byj + Bzk, where Bx = 6. 9 G, By = 2. 6 G, and Bz = 1. 1 G. A) Calculate the i component of the magnetic force Fx, in newtons, exerted on the wire by the magnetic field due to the circuit element. B) Calculate the k component of the magnetic force Fz, in newtons, exerted on the wire by the magnetic field due to the circuit element. C) Calculate the magnitude of the magnetic force F, in newtons, exerted on the wire by the magnetic field due to the circuit element Surprisingly, Guests have a _____ to use the indoor pool in the summer.1- Trend2-Tendency3- Movement4- habit the future value of an ordinary annuity table is used when calculating multiple choice question. the present value of a series of payments. the present value of a single amount. the future value of a series of payments. solve the equation x^2+4x-11=0 by completing the square Who says the following and why?"You see, we're all savages, more or less. We're supposed to be civilized and cultured-to knowall about poetry and philosophy and art and science, and so on; but how many of us know eventhe meanings of these names? [To Miss Hill] What do you know of poetry? [To Mrs. Hill] What doyou know of science? [Indicating Freddy] What does he know of art or science or anything else?What the devil do you imagine I know of philosophy?"Liza is mildly embarrassing herself in her meeting with Mrs. Higgins and the HillsMrs. Higgins is trying to reel the conversation in after Higgins has worked everybody up. Higgins is explaining why saying what one really feels is a very bad idea,Higgins has become infuriated at Freddy and is taking it out on the whole partyNEXT QUESTIONASK FOR HELPTURN ITIN 8. Determine the beta of a portfolio formed by 30% risk-free asset, 25% stocks of UBS with a volatility of 15% and with a beta of 0.8; 65% in Unilever stocks with a variance of 0.0012 and a beta equal to 0,6 and a short selling position equal to 20% in corporate bonds of Eon with a beta of 0,3. A) Beta between 0, 45 and 0,55 B) Beta between 0,6 and 0,7 C) Beta between 0,33 and 0,43 D) None of the above the degree to which people believe a person has their best interests in mind is known as: although a firm's existing mix of financing sources may reflect its target capital structure, it is ultimately . group of answer choices the internal rate of return that is relevant for evaluating the firm's future investment opportunities the marginal cost of capital that is relevant for evaluating the firm's future investment opportunities the risk-free rate of return that is relevant for evaluating the firm's future investment opportunities the risk-free rate of return that is relevant for evaluating the firm's future financing opportunities for overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. group of answer choices a - 20%, b - 80% a - 50%, b - 50% a - 10%, b - 90% a - 0%, b - 100% An African mousebird is 2 feet tall. A camel is 4 times as tall as the mousebird. How tall is the camel in inches? Sarah took the advertising department from her company on a round trip to meet with a potential client. Including Sarah a total of 13 people took the trip. She was able to purchase coach tickets for $380and first class tickets for $1200. She used her total budget for airfare for the trip, which was $9040. How many first class tickets did she buy? How many coach tickets did she buy?number of first class tickets bought= the environment.exit() method is part of what namespace? actions an employer can take to work toward inclusion of those historically underrepresented in the workplace include all of the following except: group of answer choices hiring and training groups that have been underrepresented recruiting from groups the employer hasn't previously made an attempt to recruit from mentoring, management training, and other development hiring individuals from underrepresented groups, even if not fully qualified The common stock of NCP paid 1.32 in dividends last year. Dividends are expected to grow at an 8% annual rate for an indefinite number of years.a. If NCP's current market price is $23.50 per share, what is the stock's expected rate of return?b. If your required rate of return is 10.5 %, what is the value of the stock for that investor?c. Should you make the investment? The youngest sea floor is typically found ______. a. along passive margins b. along active margins c. along mid-ocean ridges d. randomly within abyssal plains. a hair drier uses 8 a at 114 v. it is used with a transformer in england, where the line voltage is 237 v. what should be the ratio of the turns of the transformer (primary to secondary)?