old faithful geyser in yellowstone national park shoots water every hour to a height of 40.0 m. with what velocity does the water leave the ground?

The electric motor's efficiency is 51.06%.

The majority of electric motors are made to operate between 50% and 100% of rated load. Typically, maximum efficiency is within 75% of rated load. Hence, the allowable load range for a 10-horsepower (hp) motor is between 5 and 10 hp; its peak efficiency is at 7.5 hp. Below roughly 50% load, a motor's efficiency tends to decline significantly.

To calculate the effort required to raise the object, use the formula:

Work = Force x Distance

= m x g x h (where m is the mass of the object, g is the acceleration due to gravity, and h is the height lifted)

= 34 kg x 9.81 m/s² x 11 m

= 3,769.34 J

The energy consumed by the electric motor is given as 7.4 kJ.

Therefore, the input power is:

Input power = Energy consumed / time taken

= 7.4 kJ / t

Efficiency=(Output power/Input power) x 100%

Output power = Work done/time taken

= 3,769.34 J / t

As a result, the electric motor's efficiency is:

Efficiency=(Output power/Input power)x 100%

= [(3,769.34 J / t) / (7.4 kJ / t)] x 100%

= 51.06%.

To know more about electric motor's visit:-

https://brainly.com/question/30033576

#SPJ1

If an object is raised twice as high, its potential energy will be four times as much.

Potential energy Gravitational potential energy According to the question, if an object is raised twice as high, its potential energy will be four times as much.

The potential energy is the stored energy of an object. It depends on an object’s position or configuration.

Potential energy is classified into three types: elastic potential energy, gravitational potential energy, and electric potential energy.

The gravitational potential energy of an object is the energy stored in an object when it is moved against the gravitational force. It depends on the mass of an object, the acceleration due to gravity, and the height an object is above the ground.

The equation for gravitational potential energy is:

GPE = mgh where GPE is gravitational potential energy in joules (J)m is the mass of the object in kilograms (kg)g is the acceleration due to gravity in meters per second squared (m/s²)h is the height of the object in meters (m).

To know more about Potential energy refer here:

https://brainly.com/question/12563191#

#SPJ11

The choices below correctly lists things in order from largest to smallest, is D) universe, local group, milky way, solar system.

The universe is the largest structure in existence, followed by the local group of galaxies (which contains our Milky Way), followed by the milky way itself, and finally the solar system which is the smallest structure.

In terms of scale, the universe is far larger than any other structure, containing billions of galaxies and stars within it. The local group is a cluster of galaxies containing around 54 galaxies, of which our milky way is one. The milky way is itself a large collection of stars and planets, including our solar system which contains the planets and moons of our own solar system. So, in summary, the correct ordering from largest to smallest is Universe, Local Group, Milky Way, Solar System.

Learn more about solar system at:

https://brainly.com/question/3453959

#SPJ11

The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.

It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.

The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.

The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.

Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.

The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.

By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.

to know more about vector refer here:

https://brainly.com/question/24256726#

#SPJ11

Mercury's average density is about 1.5 times greater than that of Earth's moon, even though the two bodies have similar radii. This suggests that Mercury's composition is denser than that of Earth's moon.

The density of a substance is defined as the ratio of its mass to its volume. Mercury's average density is about 5.427 grams per cubic centimeter (g/cm³), whereas the average density of Earth's moon is about 3.34 g/cm³. Despite the fact that Mercury and Earth's moon have similar radii, Mercury's density is approximately 1.5 times greater than that of Earth's moon, indicating that Mercury's composition is denser than that of Earth's moon.

Mercury, unlike the Moon, has a large iron core, which contributes to its high density. The high density of Mercury's core, which is thought to account for about 60% of the planet's mass, is caused by the fact that it is composed primarily of iron and nickel.

Learn more about density at https://brainly.com/question/1354972

#SPJ11

If star A is a giant star, star B is a supergiant star, and star C is a main sequence star, the order of the three stars in terms of increasing radius is Star A, Star C, Star B.

A giant star is a luminous star that is considerably larger and brighter than the sun. The distinction between giant and dwarf stars is primarily determined by their luminosity, and giant stars are more luminous. They are not, however, larger in diameter than dwarf stars. Their size is the outcome of a high luminosity-to-mass ratio.

A supergiant star is a massive star with a luminosity that is many times greater than that of a giant star. As a result, a supergiant star is much larger than a giant star. However, supergiant stars have a similar surface temperature as giant stars.

Sequence stars are stars that spend most of their lives in the primary sequence of stars. A main-sequence star is a star that is in the hydrogen-burning phase of its evolution. It is in a state of hydrostatic equilibrium, meaning that the gravitational force holding the star together is balanced by the pressure generated by the thermonuclear fusion taking place in its core.

The stars will have the following order in terms of increasing radius: Star A, Star C, Star B if star A is a giant star, star B is a supergiant star, and star C is a main sequence star, and they all have the same surface temperature.

To learn more about surface temperature of stars https://brainly.com/question/31116168

#SPJ11

Answer:

the answer is a number

Explanation:

support me

In statistical mechanics, the partition function (denoted as Q) is a mathematical function that describes the distribution of energy among the possible microstates of a system in thermodynamic equilibrium. The partition function depends on the energy levels and degeneracies of the system, as well as on the temperature and other external parameters.

The Boltzmann factor (denoted as e^(-E/kT)) is a term that appears in the partition function and represents the probability of a system occupying a particular energy level. Here, E is the energy of the level, k is the Boltzmann constant, and T is the temperature of the system in Kelvin. The Boltzmann factor is derived from the Boltzmann distribution, which is a probability distribution that describes the occupation of energy levels in a system.

The Boltzmann factor can be used to estimate the probability of a system occupying a particular energy state by comparing the Boltzmann factors for different states. The ratio of the Boltzmann factors for two energy states gives the relative probability of the system occupying each state. For example, if the ratio of the Boltzmann factors for two energy levels is 10:1, then the system is 10 times more likely to occupy the lower energy level than the higher energy level at that temperature.

Overall, the partition function and the Boltzmann factor are fundamental concepts in statistical mechanics that allow us to describe the distribution of energy among the microstates of a system in thermal equilibrium and estimate the probability of the system occupying specific energy states.

For more question on thermodynamic click on

https://brainly.com/question/13059309

#SPJ11

The density of the hypothetical planet, in kg/m3, is 6,246 kg/m3

V = (4/3)πr3

V = (4/3)π(162 x 106 m)3

V = 9.30 x 1018 m3

The density of the planet in kg/m3

We know that Density is given as

D = Mass ÷ Volume

D = 1027 kg ÷ 9.30 x 1018 m3

D = 6,246 kg/m3

Density is a measure of mass per unit of volume. It is expressed in terms of mass per volume and is typically measured in kg/m3 or g/cm3. Density is an important physical property of matter as it allows us to compare the mass of different substances at the same volume.

Learn more about density here:

https://brainly.com/question/26364788

#SPJ1

The speed acquired by the body is 49m/s and 59m/s respectively.

The speed can be calculated using the formula:

v= u + gt,  where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.

The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.

The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.

In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

The Maxwell equation ∇ × E = -∂B/∂t can be used to predict the magnetic field in a region of space in which the electric flux is changing.

The Maxwell equation ∇ × E = -∂B/∂t is one of the four Maxwell equations that describe the behavior of electric and magnetic fields. It relates the curl of the electric field to the time rate of change of the magnetic field. In other words, it describes how a changing electric field creates a magnetic field.

This equation is important in the study of electromagnetic waves, which are generated by changing electric and magnetic fields. When an electric field changes in time, it creates a magnetic field, which then creates an electric field, and so on, creating a self-sustaining wave.

The equation can be used to predict the behavior of electromagnetic waves in space, as well as the behavior of electric and magnetic fields in the presence of each other.

To know more about Maxwell equation, refer here:

https://brainly.com/question/28956380#

#SPJ11

An electron and a proton are placed at rest in a uniform electric field of magnitude 498 N/C. The speed of electron and proton 44.4 ns after being released is -3.87 × 10⁶ m/s and 2.13 × 10³ m/s respectively.

Given data:

Electric field (E) = 498 N/C,

Time (t) = 44.4 ns = 44.4 × 10⁻⁹ s,

Mass of electron (m₁) = 9.11 × 10⁻³¹ kg,

Mass of proton (m₂) = 1.67 × 10⁻²⁷ kg.

Formula:

The acceleration produced in the electric field is given by a = qE/m, where q is the charge of the particle, E is the electric field strength, and m is the mass of the particle.

From the above formula, we can find the acceleration produced by the electric field on the electron and proton as follows:

For electron (q = -e, where e is the charge of an electron)

a₁ = qE/m₁ = -eE/m₁

= -1.6 × 10⁻¹⁹ × 498/9.11 × 10⁻³¹

= -8.73 × 10¹⁴ m/s²

For proton (q = +e, where e is the charge of an electron)

a₂ = qE/m₂ = eE/m₂

= 1.6 × 10⁻¹⁹ × 498/1.67 × 10⁻²⁷

= 4.80 × 10⁷ m/s²

Using the kinematic equation, v = u + at, where u is the initial velocity, we can find the speed of each particle 44.4 ns after being released as follows:

For electron,

v₁ = u₁ + a₁t = 0 + (-8.73 × 10¹⁴) × 44.4 × 10⁻⁹

= -3.87 × 10⁶ m/s

For proton,

v₂ = u₂ + a₂t = 0 + (4.80 × 10⁷) × 44.4 × 10⁻⁹

= 2.13 × 10³ m/s

Thus, the speed of the electron is -3.87 × 10⁶ m/s and the speed of the proton is 2.13 × 10³ m/s.

To know more about electric field, refer here:

https://brainly.com/question/15800304#

#SPJ4

To explain to Jacob how the number of field lines and the magnitude of the charge are related, Imad should mention that the number of field lines is proportional to the magnitude of the charge.

There is a relationship between the number of field lines and the magnitude of the charge. The magnitude of the charge is directly proportional to the number of field lines that pass through the surface that is perpendicular to the field lines. The number of field lines created by a charge or charges is proportional to the charge or charges' magnitude.

In the absence of any other charges or objects, the field lines emanating from a charge with magnitude q will terminate on another charge with magnitude q of opposite polarity, according to Coulomb's law. Therefore, Jacob should be told that the number of field lines is proportional to the magnitude of the charge, meaning that if the charge's magnitude increases, the number of field lines will increase as well.

Learn more about Coulomb's law at:

https://brainly.com/question/506926

#SPJ11

Answer: A - Gold Foil Experiment

Explanation:

Answer:

A

Explanation: Rutherford's gold foil experiment.

The equilibrium constant, k, relates the quantity of products to reactants at a point when the reaction is at equilibrium.

Equilibrium is a state in which the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in the concentration of the reactants and products remaining unchanged. A reaction is said to be in equilibrium when it has reached a state of dynamic balance.

The equilibrium constant (Kc) is a measure of the extent to which a reaction proceeds to form products. The equilibrium constant is a ratio of the concentration of the products to the concentration of the reactants at equilibrium. The value of Kc varies with temperature and depends on the stoichiometry of the balanced chemical equation.

The larger the value of Kc, the greater the concentration of products relative to reactants at equilibrium. Similarly, a smaller value of Kc indicates a greater concentration of reactants at equilibrium. The equilibrium constant is useful in predicting the direction in which a chemical reaction will proceed.

If the value of Kc is greater than one, the equilibrium favors the products, and if the value of Kc is less than one, the equilibrium favors the reactants. If the value of Kc is equal to one, the reaction is said to be at equilibrium, and the concentration of the reactants and products is equal.

To know more about equilibrium refer here:

https://brainly.com/question/30694482#

#SPJ11

The magnitude of the upward acceleration of a load of bricks is 2.77 m/s².

Tension is the pulling force cаrried by flexible mediums like ropes, cаbles аnd string. Tension in а body due to the weight of the hаnging body is the net force аcting on the body.

The tension in the string when the body cаn be given аs,

T = m(a +g)

Here, (m) is the mаss of the body, (а) is the аccelerаtion аnd (g) is the аccelerаtion due to grаvity.

The tension due to the bricks with mаss of 15.2 kg is,

T = 15.2(a + 9.80)

The tension due to the bricks with mass of 27.2 kg is,

T = 27.2(9.80 - a)

Equate both the equation as,

15.2(a + 9.80) = 27.2(9.80 - a)

15.2a + 148.96 = 266.56 - 27.2a

42.4a = 117.6

a = 2.77 m/s²

Thus, the magnitude of the upward acceleration of a load of bricks is 2.77 m/s².

Your question is incomplete, but most probably your full question can be seen in the Attachment.

For more information about tension refers to the link: https://brainly.com/question/11191036

#SPJ11

(a) The decrease in internal energy of the woman, assuming no change in temperature or consumption of food is -9600 J (negative because energy is lost) and (b) her efficiency is 3.64%.

The woman does 350 J of work and 9250 J of heat is transferred from her into the environment in the process. Since the energy transferred as heat is not positive, it is not useful energy. It is energy that is not doing any work. Therefore, the total energy transferred from the woman is 9250 J (as heat).

(a) The decrease in internal energy of the woman, assuming no change in temperature or consumption of food is the sum of the energy transferred as heat and the energy used to do work.

[tex]\Delta U=Q-W[/tex]

where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system. Since no heat is added to the system,

[tex]\Delta U=-W = -350 \ J - 9250\  J = -9600 \ J[/tex] (negative because energy is lost).

(b) The efficiency of a machine is defined as the ratio of useful work done by the machine to the total energy input. In this case, the woman is the machine.

Efficiency = Useful work output / Total energy input

Total energy input = energy transferred as heat + energy used to do work [tex]= 9250 \ J + 350 \ J = 9600 \ J[/tex]

Useful work output = Work done = 350 J

Therefore, the efficiency of the woman is

Efficiency = Useful work output / Total energy input

Efficiency [tex]= 350\  J / 9600\  J\times 100 = 0.0364\times 100 = 3.64%[/tex].

Learn more about efficiency:

https://brainly.com/question/3617034

#SPJ11

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom towards the east.

A magnetic field is an area surrounding a magnet or an electric current, characterized by the presence of a force that can attract or repel other magnetic materials. The concept of magnetic fields is significant in a variety of contexts, including electromagnetism, particle physics, and ferromagnetism.

According to Faraday's Law of Electromagnetic Induction, the emf generated in a conducting wire moving in a magnetic field is proportional to the strength of the magnetic field and the velocity of the conductor.

The magnitude of the emf is given by ε = Blv sinθ, where

- ε is the magnitude of the induced emf,

- B is the magnetic field strength,

- l is the length of the wire in the magnetic field,

- v is the speed of the conductor relative to the magnetic field, and

- θ is the angle between the velocity vector and the magnetic field vector.

Due to the given conditions in the question, we can use the above formula for calculating the maximum emf. To generate the maximum motional emf in the antenna, the automobile should move in a direction perpendicular to both the antenna and the Earth's magnetic field. The angle between the velocity vector and the magnetic field vector should be 90°.

1: Identify the direction of the magnetic field. In this case, the magnetic field is directed toward the north and downward at an angle of 65.0° below the horizontal.

2: Determine the direction perpendicular to both the antenna and the magnetic field. This can be done by using the right-hand rule. Point your right thumb in the direction of the magnetic field (north and downward at 65.0° below the horizontal) and your right index finger in the direction of the antenna (vertical). Your right middle finger will then point in the direction of the motion required to generate the maximum emf (perpendicular to both the magnetic field and the antenna).

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom, is to the east.

Learn more about emf here:

https://brainly.com/question/17329842

#SPJ11

When the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s, the rate of change of the radius of the balloon is:  37/400π cm/s

We are supposed to find the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s. This is a problem involving a balloon, air and its volume.

Let's first use the formula for the volume of a sphere to get the relationship between the volume and the radius of the spherical balloon.
V= (4/3)πr3
When differentiating both sides of the above equation with respect to time, t, we have;V= (4/3)πr3,  dV/dt= 4πr² dr/dt

From the problem, we have the radius, r = 10 cm and the rate of change of volume, dV/dt = - 370 cm³/s (since the air is being let out of the balloon).

Now we can substitute the given values into the equation to obtain;
dV/dt= 4πr²
dr/dt-370 = 4π(10²)dr/dt
dr/dt = - 370/ (4π(10²))= - 37/400π cm/s
Therefore, the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s is - 37/400π cm/s.

To learn more about "Radius" here:

https://brainly.com/question/14928411#

#SPJ11

The previous question is incomplete, therefore, a properly phrased question is provided below.

What is the rate of change of the radius of a spherical balloon with a radius of 10 cm, when the air is being let out of the balloon at a constant rate of 370 cm³/s?

According to the given statement, if the current that flows through the wire is uniform, the drift velocity is the greatest at the section of wire with diameter d.

As the current is uniform throughout the wire, so the current through a given cross-sectional area is the same. Also, the current density, J is given by:

J = I/A

where I is the current and A is the cross-sectional area of the wire. Thus, if the area of the cross-section of the wire is more, the current density will be less. The current density is inversely proportional to the area of the wire, i.e. J ∝ 1/A. Hence, the drift velocity is inversely proportional to the current density, i.e. v[tex]_d[/tex] ∝ 1/J.

Thus, the drift velocity is greater where the cross-sectional area is less. So, the drift velocity is greater at the section of wire with diameter d.

So, the answer is at the section of wire with diameter d

Learn more about drift velocity at https://brainly.com/question/4269562

#SPJ11

The value of the acting force between the two coils is approximately 5.65 N.

F = (μ₀/4π) * (2I₁I₂*l)/d

Substituting these values into the method, we get:

F = (4π × [tex]10^{-7}[/tex] T·m/A) * (230 A30 A*π m)/(0.05 m)

Simplifying the expression, we get:

F ≈ 5.65 N

Force is an agent that can change the state of motion or shape of an object. it is a vector amount that has both value and path. Force can be applied through direct contact or from a distance, such as through gravitational or electromagnetic fields. Pressure is measured in gadgets of newtons (N) inside the international gadget of units (SI). Some common examples of forces include friction, tension, gravity, and electromagnetic forces.

According to Newton's laws of motion, force is directly proportional to the rate of change of momentum of an object. This means that a larger force will cause a greater acceleration of an object, and a smaller force will cause a smaller acceleration. Understanding the concept of force is essential to many areas of physics, including mechanics, thermodynamics, and electromagnetism.

To learn more about Force visit here:  

brainly.com/question/30526425

#SPJ4

The distance between your eye and the image of the butterfly in the mirror is: the same as the distance between your eye and the actual butterfly

The distance between your eye and the image of the butterfly in the mirror is the same as the distance between your eye and the actual butterfly, which is the sum of the distance from your eye to the mirror and the distance from the mirror to the butterfly.

To calculate this, we need to measure the distance from your eye to the mirror, which can be done using a ruler or tape measure, and then measure the distance from the mirror to the butterfly, which can be done using a ruler or tape measure as well. Once we have these two measurements, we can simply add them together to get the total distance between your eye and the image of the butterfly in the mirror.

To clarify further, let's use an example. If your eye is 10 cm away from the mirror and the butterfly is 30 cm away from the mirror, then the total distance between your eye and the image of the butterfly in the mirror is 40 cm. This is because 10 cm (from your eye to the mirror) + 30 cm (from the mirror to the butterfly) = 40 cm.

To know more about distance refer here:

https://brainly.com/question/15172156#

#SPJ11

The relationship between weight and best range airspeed (VBR) and best endurance airspeed (VBE) is that both VBR and VBE increase with an increase in weight.

What is best range airspeed (VBR)? Best range airspeed (VBR) refers to the airspeed at which an aircraft can cover the maximum possible distance with minimum fuel consumption. At this airspeed, the lift-to-drag ratio is the highest.

What is best endurance airspeed (VBE)? Best endurance airspeed (VBE) refers to the airspeed at which an aircraft can remain in the air for the longest possible time with minimum fuel consumption. At this airspeed, the lift-to-drag ratio is the highest.

Relationship between weight and VBR and VBE is that both VBR and VBE increase with an increase in weight.

An increase in weight means an increase in the required lift to keep the aircraft in the air. As a result, the airspeed at which the lift-to-drag ratio is the highest increases.

This is why both VBR and VBE increase with an increase in weight.

To know more about airspeed, refer here:

https://brainly.com/question/29597908#

#SPJ11

The expected acceleration of the cart when two masses of 250 g are added to it, and a mass of 60 g is placed in the mass hanger of 5 g, given that its mass is 220 g is 1.55 m/s².

What is acceleration?

Acceleration is the change in velocity with respect to time. It can be defined as the rate at which the velocity of a body changes with respect to time. It is denoted by "a".

Mass is the amount of matter in a body or object. It is a scalar quantity, which is denoted by "m".

acceleration: a = (v - u) / t

Where; a = acceleration

v = final velocity

u = initial velocity

t = time taken

The expected acceleration of the cart:

Mass = Mass of cart + Mass of 2 masses

Mass = 220 g + (2 × 250 g)

Mass = 720 g

The total mass hanging on the mass hanger:

Mass on hanger = Mass of hanger + Mass on a hanger

Mass on hanger = 5 g + 60 g

Mass on hanger = 65 g

The net force acting on the system.

Net force = (Mass on hanger + Mass) × gNet force

                = (65 g + 720 g) × 9.8 m/s²

Net force = 7.06 N

The expected acceleration of the cart;

a = F / ma

  = (7.06 N) / (720 g)

a = (7.06 N) / (0.72 kg)a

  = 9.81 m/s² × (7.06 / 0.72)a

  = 1.55 m/s²

Therefore, the expected acceleration of the cart when two masses of 250 g are added to it, and a mass of 60 g is placed in the mass hanger of 5 g, given that its mass is 220 g is 1.55 m/s².

To know more about velocity:

https://brainly.com/question/29519833

#SPJ11

The speed of the truck before the collision was 3.2 m/s.

The speed of the truck before the collision can be determined using the principle of conservation of momentum. Momentum is the product of mass and velocity. Therefore, the momentum of the truck-car system before the collision is equal to the momentum of the truck-car system after the collision.
Let us assume the speed of the car before the collision is zero. Then the momentum of the truck-car system before the collision is equal to the momentum of the truck alone. This can be expressed mathematically as:
Mbefore = MtruckVtruck = (6,300kg)(Vtruck)

Mafter = (6,300kg + 1,000kg)(2 m/s)

By equating the two equations, we can solve for V, which gives us a value of 3.2 m/s.

Therefore, the speed of the truck before the collision was 3.2 m/s.

For more such questions on Collision.

https://brainly.com/question/29865544#

#SPJ11

The apparent weight of a person with a mass of 78 kg in an elevator accelerating upward at 1.80 m/s2 is 91.2 kg.

This is calculated using the equation: apparent weight = mass x acceleration due to gravity + acceleration of elevator, which equals 78 kg x 9.81 m/s2 + 1.80 m/s2 = 91.2 kg.

Steps:

Therefore, the apparent weight of the person is 767.78 N + 140.4 N = 908.18 N.

For more questions related to apparent weight.

https://brainly.com/question/14323035

#SPJ11

A negative answer for electric force in coulombs law  indicates that the two objects have opposite charges and are attracted to one another which is option A.

Coulomb's Law is a fundamental principle of physics that describes the electrostatic force between electrically charged particles. It states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

The equation for Coulomb's Law is given by F = k * (q1 * q2) / r^2, where F is the force between the charges, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

Coulomb's Law states that the magnitude of the electric force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The negative sign in the equation indicates that the force is attractive if the charges are opposite and repulsive if the charges are the same

Therefore, if a student gets a negative answer when solving for electric force, it means that the two objects have opposite charges and are attracted to one another.

Learn more about coulomb's law below.

https://brainly.com/question/506926

#SPJ1

The energy consumed by the 7 100-watt light bulbs left on for 1.5 days is 25.2 kWh.

Given:

Total bulbs = 7

Power of each bulb = 100 W

Time = 1.5 days

To find: Energy used in KWh; Formula used: Energy = Power * Time

Energy used by one bulb in a day = 100 W * 24 hours = 2400 Wh = 2.4 KWh

Total energy used by one bulb in 1.5 days = 2.4 KWh * 1.5 = 3.6 KWh

Total energy used by 7 bulbs in 1.5 days = 3.6 KWh * 7 = 25.2 KWh

Therefore, 25.2 KWh of energy would be used by 7 total 100-w light bulbs in a parallel circuit in your basement and you leave them on for 1.5 days.

To know more about parallel circuits click here:

https://brainly.com/question/11409042

#SPJ11

For a rocket launched southward from Boulder, the Coriolis effect would cause it to drift to the east, leading to a curved flight path rather than a straight one.

The Coriolis effect is an important force to consider when launching a research rocket from Boulder. The Coriolis effect is the result of Earth's rotation and will cause any object moving along the surface of the Earth to veer to the right in the Northern hemisphere and to the left in the Southern hemisphere.

This effect is most noticeable for objects traveling long distances, such as a rocket. As it continues to fly south, the Coriolis force will continue to act upon it, increasing the curvature of its path. The magnitude of the Coriolis force depends on the speed of the object and its distance from the poles. Therefore, the more time the rocket has to travel, the more it will be deflected from its intended path.

The Coriolis effect is an important factor to consider for any research rocket launch. It has the potential to affect the accuracy and success of the mission and must be taken into account when planning a launch trajectory.

For more such questions on Coriolis effect.

https://brainly.com/question/14290551#

#SPJ11

Complete Question:

A research rocket is launched from Boulder straight towards the south. How would the Coriolis effect change the path of the rocket?

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?