Part of the proceeds from a garage sale was ​$290 worth of ​$5 and ​$20 bills. If there were 8 more ​$5 bills than ​$20 ​bills, find the number of each denomination.

The two consecutive natural numbers whose sum of squares is 181 are 9 and 10

Let's assume that the two consecutive natural numbers are x and x+1. Then, we can write an equation based on the given information:

x² + (x+1)² = 181

Expanding the equation:

x² + x² + 2x + 1 = 181

Combining like terms:

2x² + 2x - 180 = 0

Dividing both sides by 2:

x² + x - 90 = 0

Now, we can use the quadratic formula to solve for x:

x = (-b ± √(b² - 4ac)) / 2a

where a = 1, b = 1, and c = -90

x = (-1 ± √(1 + 360)) / 2

x = (-1 ± √(361)) / 2

x = (-1 ± 19) / 2

We discard the negative value, as it does not correspond to a natural number:

x = 9

Therefore, the two consecutive natural numbers are 9 and 10, and their sum of squares is 81 + 100 = 181.

To learn more about integers click on,

https://brainly.com/question/17491372

#SPJ1

Therefore, it will take 173 months to pay off the loan, or approximately 14 years and 5 months.

A percentage is a way of expressing a number as a fraction of 100. The symbol for a percentage is "%". For example, 50% is the same as 50/100 or 0.5 as a decimal. Percentages are often used to express a portion or share of a whole. For instance, if you scored 90% on a test, it means you got 90 out of 100 possible points. In finance, percentages are commonly used to express interest rates, returns on investments, or changes in stock prices.

First, we need to convert the monthly interest rate from a percentage to a decimal by dividing by 100.

0.25% / 100 = 0.0025

Now we can plug in the values into the formula:

N= (-log⁡ (1-0.0025*70000/250))/ (log⁡ (1+0.0025))

Simplifying the equation in the parentheses:

N= (-log⁡ (1-175))/ (log⁡ (1.0025))

N= (-log⁡ (0.9964))/ (0.002499)

N= 172.9

Rounding up to the nearest whole number since we can't make partial payments:

N= 173

To learn more about percentage, visit

https://brainly.com/question/29306119

#SPJ1

Answer:

14cm

Step-by-step explanation:

112÷8=14

base length=14cm

Answer:

To find the base length of a rectangle, given its area and height, you can use the formula for calculating the area of a rectangle, which is:

Area = Length x Width

In this case, you are given that the area is 112 square inches and the height is 8 inches. Let's denote the base length as "x" inches.

So, the equation for the area of the rectangle becomes:

112 = x * 8

To solve for "x", you can divide both sides of the equation by 8:

112 / 8 = x

x = 14

Therefore, the base length of the rectangle is 14 inches.

f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞),f(x) is concave down on the interval (-√(6/7), √(6/7)) ,The inflection points occur at x = -√(6/7) and x = √(6/7).

An inflection point is a point on a curve where the concavity changes, from concave up to concave down or vice versa, indicating a change in the curvature of the curve.

According to the given information:

To determine the intervals where f(x) is concave up or down, we need to find the second derivative of f(x) and determine its sign.

First, we find the first derivative of f(x):

f'(x) = (14x)/(7x²+6)²

Then, we find the second derivative of f(x):

f''(x) = [28(7x²+6)²- 28x(7x²+6)(4x)] / (7x²+6)^4

Simplifying the expression, we get:

f''(x) = 28(42x² - 72) / (7x^2+6)³

To determine where f(x) is concave up or down, we need to find the intervals where f''(x) is positive or negative, respectively.

Setting f''(x) = 0, we get:

42x² - 72 = 0

Solving for x, we get:

x = ±√(6/7)

These are the possible inflection points of f(x). To determine if they are inflection points, we need to check the sign of f''(x) on both sides of each point.

We can use a sign chart to determine the sign of f''(x) on each interval.

Intervals where f''(x) > 0 are where f(x) is concave up, and intervals where f''(x) < 0 are where f(x) is concave down.

Here is the sign chart for f''(x):

x  |   -∞   | -√(6/7) | √(6/7) |   ∞

f''(x)|   -    |     +      |     -     |   +

From the sign chart, we can see that:

a) f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞).

b) f(x) is concave down on the interval (-sqrt(6/7), √(6/7)).

c) The inflection points occur at x = -√(6/7) and x = √(6/7).

Therefore, the open intervals where f(x) is concave up are (-∞, -√(6/7)) and (√(6/7), ∞), and the open interval where f(x) is concave down is (-√(6/7), √(6/7)). The inflection points occur at x = -√(6/7) and x = √(6/7).

To know more about inflection point visit :

https://brainly.com/question/30760634

#SPJ1

The f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞),f(x) is concave down on the interval (-√(6/7), √(6/7)) ,The inflection points occur at x = -√(6/7) and x = √(6/7).

What is inflection Point?

An inflection point is a point on a curve where the concavity changes, from concave up to concave down or vice versa, indicating a change in the curvature of the curve.

According to the given information:

To determine the intervals where f(x) is concave up or down, we need to find the second derivative of f(x) and determine its sign.

First, we find the first derivative of f(x):

f'(x) = (14x)/(7x²+6)²

Then, we find the second derivative of f(x):

f''(x) = [28(7x²+6)²- 28x(7x²+6)(4x)] / (7x²+6)^4

Simplifying the expression, we get:

f''(x) = 28(4x² - 72) / (7x^2+6)³

To determine where f(x) is concave up or down, we need to find the intervals where f''(x) is positive or negative, respectively.

Setting f''(x) = 0, we get:

42x² - 72 = 0

Solving for x, we get:

x = ±√(6/7)

These are the possible inflection points of f(x). To determine if they are inflection points, we need to check the sign of f''(x) on both sides of each point.

We can use a sign chart to determine the sign of f''(x) on each interval.

Intervals where f''(x) > 0 are where f(x) is concave up, and intervals where f''(x) < 0 are where f(x) is concave down.

Here is the sign chart for f''(x):

x  |   -∞   | -√(6/7) | √(6/7) |   ∞

f''(x)|   -    |     +      |     -     |   +

From the sign chart, we can see that:

a) f(x) is concave up on the interval (-∞, √(6/7)) U (√(6/7), ∞).

b) f(x) is concave down on the interval (-sqrt(6/7), √(6/7)).

c) The inflection points occur at x = -√(6/7) and x = √(6/7).

Therefore, the open intervals where f(x) is concave up are (-∞, -√(6/7)) and (√(6/7), ∞), and the open interval where f(x) is concave down is (-√(6/7), √(6/7)). The inflection points occur at x = -√(6/7) and x = √(6/7).

To know more about inflection point visit :

https://brainly.com/question/30760634

#SPJ1

The value of x from the given figure is given as follows:

144º.

An angle that measures 180 degrees is called a straight angle, and it is formed by two opposite rays that extend in opposite directions from a common endpoint, creating a straight line. A straight angle forms a straight line, and it can also be thought of as a half-turn or a semicircle.

The two opposite rays in this problem have the measures given as follows:

Hence the equation to find the value of x is given as follows:

x + x/4 = 180

x + 0.25x = 180

1.25x = 180

x = 180/1.25

x = 144º.

More can be learned about straight angles at https://brainly.com/question/24024505

#SPJ1

Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).

The origin is the location where the two axes meet. On both the x- and y-axes, the origin is at 0. The coordinate plane is divided into four portions by the intersection of the x- and y-axes. The term "quadrant" refers to these four divisions.

We can use the slope formula to get the slopes of the lines f(x) and g(x):

slope of f(x) = (change in y)/(change in x) = (1 - (-2))/(1 - 0) = 3/1 = 3

slope of g(x) = (change in y)/(change in x) = (2 - 0)/(0 - (-4)) = 2/4 = 1/2

The slope of g(x) is 1/2, which is less than the slope of f(x), which is 3.

Therefore, the correct answer is: The slope of g(x) is less than the slope of f(x).

To know more about slope visit:-

https://brainly.com/question/3605446

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

https://brainly.com/question/12431044

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

brainly.com/question/12431044

#SPJ1

The correct matches for the probability of falling below the z-score are:

-0.08: 0.4681

0.63: 0.7357

-2.7: 0.0035

1.95: 0.9744

Explain probability

Probability is a measure of the likelihood or chance of an event occurring. It is expressed as a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain. Probability is calculated by dividing the number of favourable outcomes by the total number of possible outcomes. Probability is used in many fields, including mathematics, statistics, science, economics, and finance, to make predictions and decisions based on uncertain events.

According to the given information

To match the probability of falling below a given z-score, we need to use a standard normal distribution table or a calculator with a built-in normal distribution function. Here are the probabilities for each z-score:

To know more about probability visit

brainly.com/question/11234923

#SPJ1

The amount in the bank after 7 years increases as the compounding frequency increases, and it is highest when interest is compounded continuously.

Using the formula A = P(1 + r/n)^(nt), where:

A = the amount in the account after t years

P = the principal (initial amount)

r = the annual interest rate (as a decimal)

n = the number of times the interest is compounded per year

t = the number of years

a) If interest is compounded annually:

A = 2000(1 + 0.05/1)^(1*7) = $2,835.08

b) If interest is compounded quarterly:

A = 2000(1 + 0.05/4)^(4*7) = $2,888.95

c) If interest is compounded monthly:

A = 2000(1 + 0.05/12)^(12*7) = $2,905.03

d) If interest is compounded continuously:

A = Pe^(rt) = 2000e^(0.05*7) = $2,938.36

Therefore, the amount in the bank after 7 years increases as the compounding frequency increases, and it is highest when interest is compounded continuously.

Learn more about simple interest below.

https://brainly.com/question/25793394

#SPJ1

The value of Tanθ is 20/21.

What is Pythagorean Theorem?

A right triangle's three sides are related in Euclidean geometry by the Pythagorean theorem, also known as Pythagoras' theorem. According to this statement, the areas of the squares on the other two sides add up to the size of the square whose side is the hypotenuse.

Here, we have

Given: sinθ = -20/29 and that angle terminates in quadrant III.

We have to find the value of tanθ.

Using the definition of sine to find the known sides of the unit circle right triangle. The quadrant determines the sign on each of the values.

Sinθ = Perpendicular/hypotenuse

Find the adjacent side of the unit circle triangle. Since the hypotenuse and opposite sides are known, use the Pythagorean theorem to find the remaining side.

Adjacent = - √Hypotenuse² - perpenducualr²

Replace the known values in the equation.

Adjacent = -√29² - (-20)²

Adjacent = -21

Find the value of tangent.

Tanθ = Perpendicular/base

Tanθ = -20/(-21)

Hence, the value of Tanθ is 20/21.

To learn more about the Pythagorean Theorem from the given link

https://brainly.com/question/28981380

#SPJ1

If each person drove at a constant rate,than Laura drove the fastest

Displacement is the measurement of  the how far an object is out of place,therefore distance refers to  the how much ground an object has covered during its motion.so, examine the distinction between distance and displacement in this article.

The means of Speed is :he speed at which an object of location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The speed simply has no magnitude but it has a direction, Speed is a scalar quantity.

to compute who drove the quickest by Using this   formula

speed=Distance /time,

first of all the convert times into hours:

Hank: 3.2 hours x 3 hours and 12 minutes.

Laura: 2.5 hours is 2 hours and 30 minutes.

Nathan: 2.25 hours is 2 hours and 15 minutes.

Raquel: 4 hours plus 24 minutes equals 4.4 hours.

now to calculate the speed by above formula

Hank: 55 miles per hour for 176 miles in 3.2 hours.

Laura: 60 miles per hour equals 150 miles in 2.5 hours.

Nathan: 50 miles per houris equal to 112.5 miles in 2.25 hours.

Raquel: 65 miles for 286 miles in 4.4 hours.

As a result, Laura moved the fastest, clocking in at 60 miles. The solution, Laura, is B.

Learn more about speed here:

https://brainly.com/question/31273613

#SPJ1

yes is answer   for all option   .we can check it by rules of rounding off numbers .

what is rounding ?

Rounding is the process of approximating a number to a nearby value that is easier to work with or more appropriate for a given context. When rounding, we take a number with many decimal places or significant figures and adjust it to a simpler or more convenient value with fewer decimal places or significant figures.

In the given question,

Yes, each number is rounded correctly to the nearest hundred thousand based on the rules of rounding.

To round to the nearest hundred thousand, we look at the digit in the hundred thousand place and the digit to its right (i.e., in the ten thousand place).

If the digit in the ten thousand place is 5 or greater, we round up the digit in the hundred thousand place by adding 1.

If the digit in the ten thousand place is less than 5, we leave the digit in the hundred thousand place as it is.

Using these rules, we can see that:

350000 rounded to the nearest hundred thousand is 400000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

555555 rounded to the nearest hundred thousand is 560000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

137998 rounded to the nearest hundred thousand is 200000 because the digit in the ten thousand place is 7, so we round up the digit in the hundred thousand place.

792314 rounded to the nearest hundred thousand is 800000 because the digit in the ten thousand place is 3, so we leave the digit in the hundred thousand place as it is.

To know more about rounding , visit:

https://brainly.com/question/29878750

#SPJ1

Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.

A prism having a pentagonal base is referred to as a pentagonal prism. It has two hexagonal bases, five parallelogram faces, and seven faces. Seven faces, fifteen edges, and ten vertices make up a pentagonal prism.

The two bases of each of the seven faces—two pentagons—and the remaining five faces—parallelograms—connect the bases of the pentagons.

Given data:

surface area of pentagonal prism = 2* base area + 5*rectangle area

surface area of pentagonal prism = 2* B + 5*L*w

surface area of pentagonal prism = 2* 84.3 + 5*7*4

surface area of pentagonal prism = 168.6 + 140

surface area of pentagonal prism = 308.6 sq. ft

Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.

Know more about the pentagonal prism:

https://brainly.com/question/15637173

#SPJ1

Answer: The most appropriate design for this experiment is the third option:

- Number each item from 0000 to 1199.

- Reading from left to right on a random number table, identify 800 unique four-digit numbers from 0000 to 1199. Assign the items with labels in the first 400 numbers to the process 1 group. Assign the items with labels in the second 400 numbers to the process 2 group. Assign the remaining items to the process 3 group.

This design ensures that the groups are equally sized and selected randomly without any biases. The use of a random number table to assign the groups helps to avoid any systematic patterns or preferences that might arise from numbering or labeling the items directly.

Step-by-step explanation:

The equation of p(x) in vertex form is;

p(x) = 9.67(x + 1.04)² - 10.25

The closest answer choice is:

p(x) = 3(x - 1)²  - 2, which is not correct.

In the context of a quadratic function, the vertex is the highest or lowest point on the graph of the function. It is the point where the parabola changes direction. The vertex is also the point where the axis of symmetry intersects the parabola.

To find the vertex form of the quadratic function p(x), we need to first find the vertex, which is the point where the function reaches its maximum or minimum value.

To find the vertex, we can use the formula:

x = -b/2a, where a is the coefficient of the x²  term, b is the coefficient of the x term, and c is the constant term.

Using the table, we can see that the highest value of p(x) occurs at x = 5, and the value is 46.

We can then use the formula to find the vertex:

x = -b/2a = -5/2a

Using the values from the table, we can set up two equations:

46 = a(5)² + b(5) + c

1 = a(0)²  + b(0) + c

Simplifying the second equation, we get:

1 = c

Substituting c = 1 into the first equation and solving for a and b, we get:

46 = 25a + 5b + 1

-20 = 5a + b

Solving for b, we get:

b = -20 - 5a

Substituting b = -20 - 5a into the first equation and solving for a, we get:

46 = 25a + 5(-20 - 5a) + 1

46 = 15a - 99

145 = 15a

a = 9.67

Substituting a = 9.67 and c = 1 into b = -20 - 5a, we get:

b = -20 - 5(9.67) = -71.35

Therefore, the equation of p(x) in vertex form is:

p(x) = 9.67(x - 5)²  + 1

Simplifying, we get:

p(x) = 9.67(x²  - 10x + 25) + 1

p(x) = 9.67x²  - 96.7x + 250.85 + 1

p(x) = 9.67x²  - 96.7x + 251.85

Rounding to the nearest hundredth, we get:

p(x) = 9.67(x - 5²  + 1 = 9.67(x + 1.04)²  - 10.25

Therefore, the answer is:

p(x) = 9.67(x + 1.04)² - 10.25

The closest answer choice is:

p(x) = 3(x - 1)²  - 2, which is not correct.

To know more about vertex visit:

https://brainly.com/question/29476657

#SPJ1

The variance of the population according to the given table is option B 41.

The spread or dispersion of a set of data around its mean is measured by variance. It has the same units as the original data and is calculated as the average of the squared deviations from the mean. Variance is a frequently used statistical term to describe the diversity or variability of a population or sample. When the variance is modest, the data points are closely grouped around the mean, whereas when the variance is great, the data points are widely dispersed.

The variance is given by the formula:

variance = (sum of squared deviations from the mean) / (number of observations)

Using the table we have sum of squared deviations from the mean:

81 + 1 + 1 + 81 = 164

variance = 164 / 4 = 41

Hence, the variance of the population according to the given table is option B 41.

Learn more about variance here:

https://brainly.com/question/13708253

#SPJ1

The control group for the experiment would be option C: some plants will receive no sunlight.

The control group in an experiment is the group that does not receive the treatment or intervention being tested, so that the effects of the treatment can be compared to a baseline or reference point. In this experiment, the treatment being tested is the provision of sunlight as an energy source for plant growth.

Therefore, the control group should not receive sunlight, so that the effects of sunlight can be compared to the baseline of plant growth without sunlight.

Therefore, the control group for the experiment would be option C: some plants will receive no sunlight.

Learn more about control group here : brainly.com/question/24163400

#SPJ1

Answer:

Step-by-step explanation:

0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89,144,233,377,610,987, 1597, 2584, 4181, 6765, 10946, 17711, 28657, 46368, 75025, 121393, 196418, 317811, 514229, ... Can you figure out the next few numbers?

Expressions for the square footage of the tile Dining area, Considering only the tile floor, and not the cabinets shown in black will be (16 x 13) - (12 x 2) and (4 x 13) + (12 x 11)

The area of a rectangle is a measure of the amount of space it occupies in two-dimensional (2D) space. It is calculated by multiplying the length of the rectangle by its width. Mathmatically,

                                     [tex]Area=length*width[/tex]

Now, Solving given problem,

The total area of the grid will be:Length of grid = 16 ft, Width of grid = 13 ft

Total area of grid = Length x Width = 16 ft x 13 ft = 208 sq ft

The area of the rectangle in the top right :Length of rectangle = 12 ft, Width of rectangle = 2 ft

Area of rectangle = Length x Width = 12 ft x 2 ft = 24 sq ft

To remove the top right rectangle from the tile dining area, subtract its area from the total area of the grid:

(Total area of grid) - (Area of rectangle in top right) = (208 sq ft -24 sq ft )= 184 sq ft

So, the expression for this calculation will be: (16 x 13) - (12 x 2) = 184 sq ft

The area of the vertical rectangles on the far left and right sides is calculated as follows:Width of vertical rectangles = 4 ft, Length of grid = 13 ft

Area of vertical rectangles = Width of vertical rectangles x Length of grid = 4 ft x 13 ft = 52 sq ft

The area of the rectangle in the top right:Length of rectangle = 12 ft, Width of rectangle = 11 ft

Area of rectangle = Length x Width = 12 ft x 11 ft = 132 sq ft

Add the areas of the vertical rectangles and the rectangle in the top right to get the total area of the tile dining area:

Area of vertical rectangles + Area of rectangle in top right = 52 sq ft + 132 sq ft = 184 sq ft

So, the expression for this calculation is: (4 x 13) + (12 x 11) = 184 sq ft

Hence, both of these expressions- (16 x 13) - (12 x 2) and (4 x 13) + (12 x 11) gives the square footage of the tile dining area based on the given information.

Learn more about Areas here:

https://brainly.com/question/27683633

#SPJ1

Thus, the time taken for the sum of $1500 to become $1600 with 6.49% simple annual interest rate is found as 1.027 years.

Simple interest is the percentage that is charged on the principal sum of money that is lent or borrowed. Similar to this, when you deposit a particular amount in a bank, you can also earn interest.

Calculating simple interest is as easy as multiplying the principal borrowed or lent, the interest rate, and the loan's term (or repayment time).

Given data:

Principal P = $1500

Amount after interest A = $1600

Rate of simple interest R = 6.49%

Time  = T years

The formula for the simple interest:

SI = PRT/100

A = P + SI

A = P + PRT/100

PRT/100 = A - P

1500*6.49*T/100 = 1600 - 1500

1500*6.49*T = 100 *100

T = 10000 / 9735

T = 1.027 years

Thus, the time taken for the sum of $1500 to become $1600 with 6.49% simple annual interest rate is found as 1.027 years.

Know more about the simple interest:

https://brainly.com/question/25793394

#SPJ1

The range is the best measure of variability for this data, and its value is 4.

The line plot displays the number of roses purchased per day at a grocery store, with the data values ranging from 0 to 4 (since there are no dots above 4).

The best measure of variability for this data is the range, which is the difference between the maximum and minimum values in the data set. In this case, the minimum value is 0 and the maximum value is 4, so the range is:

Range = Maximum value - Minimum value = 4 - 0 = 4

Therefore, the range is the best measure of variability for this data, and its value is 4.

to know more about range

brainly.com/question/29452843

#SPJ1

63% of people Surveyed shop at a local grocery store.

A number can be expressed as a fraction of 100 using a percentage. The word "%" stands for percentage.

For instance, 50% represents 50 out of 100, or 0.5 in decimal form. Frequently, proportions, rates, and changes in quantity are represented as percentages.

In many aspects of daily life, including the calculation of sales tax, loan interest rates, and price discounts, percentages are frequently utilised. They are also employed in many academic disciplines, including math, physics, economics, and statistics.

The equality of two ratios is referred to as a percentage in mathematics. A ratio is a comparison of two amounts or values;

it is frequently stated as a fraction.

For instance, "3/5" can be used to represent the proportion of boys to girls in a classroom.

An assertion of equality between two ratios is a proportion.

For instance, the ratio of males to girls is the same as the ratio of boys to all pupils,

hence the sentence "3/5 = 6/10" is a proportion.

Analysis: -

people surveyed at store = 45

total no. of people = 72

the

Percent of peopla = 45/72  x100

= 0.625 × 100

= 62.5 %

= 63 %

63% of people Surveyed shop at a local grocery store.

To learn more about percentage visit:

https://brainly.com/question/29306119

#SPJ1

Therefore, it is not even chance, but it is also not very unlikely. It is moderately likely that a yellow marble will be selected on the first draw.

Probability is a branch of mathematics that deals with the study of random events and their likelihood of occurring. It is a measure of the likelihood or chance of an event happening. Probability is expressed as a number between 0 and 1, where 0 means the event is impossible, and 1 means the event is certain.

In other words, probability is a way of quantifying uncertainty. It is used in various fields, such as statistics, physics, finance, engineering, and more, to help make predictions and decisions based on uncertain information. Probability theory provides a set of rules and tools for analyzing and manipulating random variables and events, and for calculating the probability of complex events.

The likelihood of a yellow marble being selected on the first draw can be calculated by dividing the number of yellow marbles by the total number of marbles in the bag:

likelihood of selecting a yellow marble = number of yellow marbles / total number of marbles

So, in this case, the likelihood of selecting a yellow marble on the first draw is:

likelihood of selecting a yellow marble = 2 / (3 + 2 + 1) = 2/6 = 1/3

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1

subtract 3 from both sides to get

4x > 27

divide both sides by 4 to get

x > 27/4 or 6 3/4

An observation is considered an outlier if it is below 35.5 or above 79.5 in this dataset.

To determine the outliers in a dataset using the five-number summary, we need to calculate the interquartile range (IQR), which is the difference between the third quartile (Q3) and the first quartile (Q1).

IQR = Q3 - Q1

Where

Q1 = 52

Q3 = 63

So, we have

IQR = 63 - 52

IQR = 11

An observation is considered an outlier if it is:

Below Q1 - 1.5 × IQR

Above Q3 + 1.5 × IQR

Substituting the values, we get:

Below 52 - 1.5 × 11 = 35.5

Above 63 + 1.5 × 11 = 79.5

Therefore, an observation is considered an outlier if it is below 35.5 or above 79.5 in this dataset.

Read more about outliers at

https://brainly.com/question/27893355

#SPJ1

The exponential function of the population is P(x) = 15000 * 1.046^x

From the question, we have the following parameters that can be used in our computation:

Initial, a = 15000

Rate, r = 4.6%

The equation of the function is represented as

P(x) = a * (1 + r)^x

Substitute the known values in the above equation, so, we have the following representation

P(x) = 15000 * (1 + 4.6%)^x

Evaluate

P(x) = 15000 * 1.046^x

Hence, the function is P(x) = 15000 * 1.046^x

Read more about exponential function at

https://brainly.com/question/2456547

#SPJ1

Therefore, the answer is (A) 7x-9 when it is given that function F(x) = 4x - 8 and g(x) = -3x + 1.

In mathematics, a function is a relationship between two sets of values, where each input (or domain element) is associated with a unique output (or range element). In other words, a function is a rule or a process that takes an input (or inputs) and produces a corresponding output. Functions can be expressed using various mathematical notations, such as algebraic formulas, graphs, tables, or even verbal descriptions. They are widely used in many fields of mathematics, science, engineering, economics, and computer science, to model and solve problems that involve relationships between variables or quantities.

Here,

To find (f - g)(x), we need to subtract g(x) from f(x), so we get:

(f - g)(x) = f(x) - g(x)

Substituting the given functions, we get:

(f - g)(x) = (4x - 8) - (-3x + 1)

Simplifying the expression by distributing the negative sign, we get:

(f - g)(x) = 4x - 8 + 3x - 1

Combining like terms, we get:

(f - g)(x) = 7x - 9

To know more about function,

https://brainly.com/question/28193995

#SPJ1

If Riders have to climb a m staircase to board the ride at its lowest point.

a. sine function for the height of Emma, who is at the very top of the ride when t = 0 is: h(t) = 60 sin(π/6 t).

b. a cosine function for Eva, who is just boarding the ride is: h(t) = m + 60 cos(π/6 t).

c.  a sine function for Matthew is: h(t) = 30 sin(π/6 t).

(a) Let's assume that the Ferris wheel completes one full revolution in 12 minutes. The height of the Ferris wheel can be modeled by a sine function as it moves up and down periodically. When the Ferris wheel completes one revolution, it returns to its original position, so the period of the sine function is 12 minutes.

The maximum height of the Ferris wheel is 60 m, so the amplitude of the sine function is 60 m. When t = 0, Emma is at the very top of the ride, which means she is at the maximum height of the Ferris wheel. Therefore, the sine function for Emma's height, h(t), can be written as:

h(t) = 60 sin(2π/12 t)

Simplifying this equation, we get:

h(t) = 60 sin(π/6 t)

(b) Eva is just boarding the ride, which means she is at the lowest point of the ride when t = 0. The cosine function is ideal for modeling this situation, as it starts at its maximum value and reaches its minimum value after one-fourth of the period. Therefore, the cosine function for Eva's height, h(t), can be written as:

h(t) = m + 60 cos(2π/12 t)

Simplifying this equation, we get:

h(t) = m + 60 cos(π/6 t)

where m is the height of the staircase that Eva has to climb to board the ride.

(c) Matthew is at the same height as the central axle of the Ferris wheel, which means he is halfway between the maximum and minimum height of the ride. Therefore, the sine function for Matthew's height, h(t), can be written as:

h(t) = 30 sin(2π/12 t)

Simplifying this equation, we get:

h(t) = 30 sin(π/6 t)

Therefore  sine function for the height of Emma, who is at the very top of the ride when t = 0 is: h(t) = 60 sin(π/6 t).

Learn more about sine function here:https://brainly.com/question/9565966

#SPJ1

Answer:

Step-by-step explanation:

The distance formula is

[tex]d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

x1 is a,

x2 is 0,

y1 is 0 and

y2 is b. Fitting those into the formula where they belong:

[tex]d=\sqrt{(0-a)^2+(b-0)^2}[/tex] and

[tex]d=\sqrt{(-a)^2+(b)^2}[/tex]

Since a negative squared is a positive, then

[tex]d=\sqrt{a^2+b^2}[/tex]

which is the second choice down.