The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.

Answers

Answer 1
C option is correct one

Related Questions

Which of these objects is an insulator?
b. copper coin
d. steel fork
a. gold ring
C. glass rod

Answers

Answer:

C

Explanation:

Glass is one of the objects included in an insular so glass rod will be the final ans.

Answer: C; glass rod.
Explanation: Glass is an insulator, while the others are conductors, meaning that it allows electrons to flow in. Insulators do the opposite, meaning that they block the flow of electrons. Hope that helped!

What happens when thermal energy is applied to a substance q

Answers

When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.

What happens when thermal energy is applies to a substance

As a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.

The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.

If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.  

Learn more about thermal energy  at

https://brainly.com/question/19666326

#SPJ1

solid forms of ice last longer because there is more weight with less surface area. (True or False)

Answers

The solid forms of ice last longer because there is more weight with less surface area. This statement is false.

Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.

In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.

To know more about Melting of ice, visit,

https://brainly.com/question/1079154

#SPJ4

a student is 2.50m away from a convex lens while her image is 1.80m from the lens, what is the focal length?

Answers

To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do

Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.

We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.

Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50

Simplifying this equation, we get:
1/f = 0.5556

Multiplying both sides by f, we get:
f = 1.80 / 0.5556

Solving for f, we get:
f ≈ 3.24 meters

Therefore, the focal length of the convex lens is approximately 3.24 meters.

To know more about focal length of a convex lens:

https://brainly.com/question/1031772

#SPJ11

A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.

To solve this problem, we can use the lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:

1/f = 1/do + 1/di

1/f = 1/2.50 + 1/1.80

1/f = 0.4 + 0.56

1/f = 0.96

f = 1/0.96

f ≈ 1.04 meters

Therefore, the focal length of the convex lens is approximately 1.04 meters.

To learn more about focal length, refer:-

https://brainly.com/question/29870264

#SPJ11

The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.​

Answers

Answer:

C.

Explanation:

When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.

voyager 1 is a space probe launched by nasa in 1977 and is the farthest human-made object. it experiences negligible gravity. voyager 1 is propelled by thrusters but will run out of fuel by 2040. what will happen to voyager 1 after this date?multiple select question.the velocity of voyager 1 will remain unchanged.voyager 1 will slow down from the velocity it will have when the fuel runs out.voyager 1 will immediately stop.voyager 1 will continue moving with the speed it will have when the fuel runs out.

Answers

Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.

Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.

Learn more about Voyager 1

https://brainly.com/question/3412409

#SPJ4

a 1 meter long solenoid with 200 turns carries 2a of current . calculate the magnetic field on axis.

Answers

The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

The magnetic field on the axis of a solenoid can be calculated using the formula:

B = μ₀ * n * I

Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.

In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.

The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A

When we enter these values into the formula, we get:

B = μ₀ * n * I

= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A

= 5.03 × 10⁻⁴ T

Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

Learn more about  magnetic field

https://brainly.com/question/14848188

#SPJ4

magnetic field on the axis of the solenoid is approximately 0.005 T

Solution -  Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:

Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)

where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.

In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:

n = 200 turns / 1 m = 200 turns/m

Now, plug the values into the formula:

B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)

B ≈ 0.005 T

The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).

To learn more about solenoid, click on this

brainly.com/question/22043434

#SPJ11

question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?

Answers

The differences between ambient sounds, sound effects, and Foley sounds.

Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.

Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.

In summary:

1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.

To know more about ambient sounds, sound effects, and Foley sounds:

https://brainly.com/question/16519187

#SPJ11

A wire, of length L = 3. 8 mm, on a circuit board carries a current of I = 2. 54 μA in the j direction. A nearby circuit element generates a magnetic field in the vicinity of the wire of B = Bxi + Byj + Bzk, where Bx = 6. 9 G, By = 2. 6 G, and Bz = 1. 1 G. A) Calculate the i component of the magnetic force Fx, in newtons, exerted on the wire by the magnetic field due to the circuit element.

B) Calculate the k component of the magnetic force Fz, in newtons, exerted on the wire by the magnetic field due to the circuit element.

C) Calculate the magnitude of the magnetic force F, in newtons, exerted on the wire by the magnetic field due to the circuit element

Answers

The i component of the magnetic force on the wire is 1.06 × 10^-13 N. The k component of the magnetic force on the wire is 6.69 × 10^-14 N. The magnitude of the magnetic force on the wire is 1.26 × 10^-13 N.

To calculate the i component of the magnetic force, we use the formula:

F = I * L x B

where I is the current, L is the length of the wire, B is the magnetic field, and x represents the cross product.

The cross product of L and B gives a vector perpendicular to both L and B, which is in the i direction. So we only need to find the magnitude of the cross product and multiply it by I to get Fx.

|L x B| = |L| |B| sinθ

where θ is the angle between L and B. Since L is in the j direction and B has i and k components, we have:

|L x B| = L * Bz = (3.8 × 10^-3 m) * (1.1 × 10^-4 T) = 4.18 × 10^-8 N

Then, Fx = I * |L x B| = (2.54 × 10^-6 A) * (4.18 × 10^-8 N) = 1.06 × 10^-13 N

To calculate the k component of the magnetic force, we use the same formula and take the k component of the cross product:

|L x B|k = |L| |B| sin(π/2) = |L| |B| = (3.8 × 10^-3 m) * (6.9 × 10^-5 T) = 2.63 × 10^-7 N

Then, Fz = I * |L x B|k = (2.54 × 10^-6 A) * (2.63 × 10^-7 N) = 6.69 × 10^-14 N

The magnitude of the magnetic force is given by,

F = sqrt(Fx^2 + Fz^2) = sqrt((1.06 × 10^-13 N)^2 + (6.69 × 10^-14 N)^2) = 1.26 × 10^-13 N

To know more about magnetic force, here

brainly.com/question/3160109

#SPJ4

if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?

Answers

The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.

In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.

More on hydrogen: https://brainly.com/question/30077093

#SPJ11

help me please oml 2 one

Answers

Color: Both the bromine gas and steak have a brownish color.

What is bromine gas?

Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.

Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.

To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1

this question has multiple answers. choose all that are correct. the hotter an object group of answer choices the brighter the object. the faster the object. the redder the object. the dimmer the object. the bluer the object. the slower the object.

Answers

The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.

The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.

This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.

The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.

To learn more about : objects

https://brainly.com/question/28308143

#SPJ11

when the distance between two charges is halved, the electrical force between the charges is reduced by 1/4. quadruples. halves. doubles. none of the above choices are correct.

Answers

When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.



The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:

F = k * (q1 * q2) / r^2

When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.

To learn more about quadruples please visit:

https://brainly.com/question/7966538

#SPJ11

another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:

Answers

The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.

When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:

[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]

Where C1, C2, ..., Cn are the capacitances of the individual capacitors.

Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.

Learn more about circuit's capacitance.

https://brainly.com/question/28884207

#SPJ4

5. Explain the law of conservation of energy using a relevant example from every day life.​

Answers

The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.

What is law of conservation of energy?

The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.

Examples of activities of everyday life that shows the conservation of energy include the following:

For loudspeaker, electrical energy is converted into sound energy.

For a microphone, sound energy is converted into electrical energy.

For a generator, mechanical energy is converted into electrical energy.

When fuels are burnt, chemical energy is converted into heat and light energy

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

An example of the law of conservation of energy is a roller coaster.

What is the law of conservation of energy?

The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.

A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.

Learn about law of conservation of energy here https://brainly.com/question/166559

#SPJ1

what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.

Answers

The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.

This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.

Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.

However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.

Learn more about interferometry:

https://brainly.com/question/30054443

#SPJ11

what is the weight of a cubic meter of cork? could you lift it? (use 400 kg/m^3 for the density of cork.)

Answers

To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).

weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]

weight = 3,920 N

Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.

Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.

To learn more about Force visit here:

brainly.com/question/24115409

#SPJ4

as per subpart b, a physician who is a member of the research team on a study involving nonviable neonates may assist the treating physicians in determining whether neonates are nonviable. True or false?

Answers

True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.

What exactly is a contest?

Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.

An organism is what?

Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions

To know more about organism visit:

https://brainly.com/question/13278945

#SPJ1

Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.

Answers

Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.

What is Wavelength?

Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).

Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.

Learn more about Wavelength from the given link

https://brainly.com/question/10750459

#SPJ1

Humerus
Sholder
Joint
2. What side of the chicken's body did this wing belong to? Why?

Answers

The upper limb is the side of the chicken's body did this wing belong to.

Where is the shoulder joint in a chicken?

Humerus, shoulder, and joint are related to the anatomy of the upper limb. The humerus is the long bone in the upper arm, the shoulder is the joint that connects the arm to the body, and the joint refers to the articulation between bones.

In a chicken, the shoulder joint is located at the junction of the humerus (upper arm bone) and the scapula (shoulder blade). It is a ball-and-socket joint that allows for a wide range of motion in the chicken's wing. The shoulder joint is important for a chicken's ability to fly, flap its wings, and perform other movements that require mobility and stability in the upper limb.

Read more on upper limb here:https://brainly.com/question/6963710

#SPJ1

a pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

Answers

The option A is  best representation of the path that the ball would take after the string breaks.

When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.

When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.

Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.

To learn more about : string

https://brainly.com/question/24994188

#SPJ11

Note the full question is

A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

A) A

B) B

C) C

D) D

E) E

ten 7.0-w christmas tree lights are connected in series to each other and to a 120-v source. what is the resistance of each bulb?

Answers

The resistance of each bulb which are connected in series is 20.571 Ω.

Let's find the resistance of each bulb using the given terms:

1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W

We'll use the formula P = V²/R to find the resistance of each bulb.

1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W

2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω

3: Find the resistance of each bulb.

Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:

R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω

So, the resistance of each bulb is approximately 20.571 Ω.

Learn more about resistance:

https://brainly.com/question/24858512

#SPJ11

if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?

Answers

Answer:

V = λ * ν       speed of wave in medium

We know the speed of a particular wave in a medium is constant.

ν = V / λ

If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.

ν' = ν / 3

A loose spiral spring carrying no current is hung from a ceiling. When a switch is thrown so that a current exists in the spring, do the coils move closer together move farther apart not move at all

Answers

The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.

The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.

Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.

To learn more about solenoids, refer to:

https://brainly.com/question/4340558

#SPJ4

when does a star become a main-sequence star? when the rate of hydrogen fusion within the star's core is high enough to maintain gravitational equilibrium when hydrogen fusion is occurring throughout a star's interior when the protostar assembles from a molecular cloud when a star becomes luminous enough to emit thermal radiation the instant when hydrogen fusion first begins in the star's core

Answers

Answer: hope it helps

Explanation:

A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.

A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier.

Answers

The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.

In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.

To know more about microscope, here

brainly.com/question/18661784

#SPJ4

--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?

a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.

b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.

c.  The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--

consider the picture above of mars's orbit around the sun. which spot shows where mars will be when we see it in retrograde motion on earth?

Answers

When retrograde motion occurs and how it is related to Mars's orbit around the Sun:

Retrograde motion occurs when a planet appears to move backward in the sky from Earth's perspective. In the case of Mars, this happens when Earth overtakes Mars in their respective orbits around the Sun.

To understand when Mars will be in retrograde motion, consider these steps:

1. Picture both Mars and Earth orbiting the Sun, with Mars having a larger, slower orbit due to its greater distance from the Sun.
2. As Earth moves faster in its orbit, it eventually catches up to and passes Mars.
3. During this time, the relative positions of Earth, Mars, and the Sun create the illusion of Mars moving backward in the sky, as seen from Earth.

So, when trying to identify the spot where Mars will be in retrograde motion, look for the point in its orbit where Earth is passing Mars, creating the optical illusion of Mars moving backward in the sky.

To know more about Retrograde motion:

https://brainly.com/question/31026528

#SPJ11

catching a wave, a 73.2-kg surfer starts with a speed of 1.44 m/s, drops through a height of 1.84 m, and ends with a speed of 8.89 m/s. how much nonconservative work was done on the surfer?

Answers

The nonconservative work done on the surfer is 2845.5 J.

We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.

The initial kinetic energy of the surfer is:

[tex]K_i = (1/2) * m * v_i^2[/tex]

[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]

K_i = 75.7 J

The final kinetic energy of the surfer is:

[tex]K_f = (1/2) * m * v_f^2[/tex]

[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]

K_f = 2921.2 J

The change in kinetic energy is:

ΔK = K_f - K_i

ΔK = 2921.2 J - 75.7 J

ΔK = 2845.5 J

According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:

W_nc = ΔK

W_nc = 2845.5 J

So, the nonconservative work done on the surfer is 2845.5 J.

Learn more about   nonconservative work

https://brainly.com/question/28588859

#SPJ4

how fast must a nonrelativistic electron move so its de broglie wavelength is the same as the wavelength of a 3.4-ev photon?

Answers

Answer:

1990.47 m/s

Explanation:

Answer: the answer is in the screen shots

Explanation:

A mass of 25. 0 kg is acted upon by two forces: is 15. 0 n due east and is 10. 0 n and due north. The acceleration of the mass is

Answers

the acceleration of the mass is 0.7212 m/s^2.

To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.

Using the Pythagorean theorem, we can find the magnitude of the diagonal force:

sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N

The direction of this force can be found using the inverse tangent function:

theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east

We can now use vector addition to find the net force on the mass:

F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east

To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

F_net = ma

Solving for the acceleration, we get:

a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2

Therefore, the acceleration of the mass is 0.7212 m/s^2.

Learn more about Vector Addition:

https://brainly.com/question/19420810

Other Questions
Restex has a debt-equity ratio of 0.72, an equity cost of capital of 15%, and a debt cost of capital of 8%. Restex's corporate tax rate is 38%, and its market capitalization is $185 million. a.If Restex's free cash flow is expected to be $10 million one year from now and will grow at a constant rate, what expected future growth rate is consistent with Restex's current market value? b.Estimate the value of Restex's interest tax shield. a.If Restex's free cash flow is expected to be $10 million one year from now and will grow at a constant rate, what expected future growth rate is consistent with Restex's current market value? If Restex's free cash flow is expected to be $10 million in one year, the expected future growth rate is ____%. (Round to two decimal places.) b.Estimate the value of Restex's interest tax shield. Interest tax shield value is $____million. (Round to the nearest million.) a carving in metal that is soaked with acid, inked, and stamped on paper true or false: the more value an individual places on information to be learned, the more effective and efficient the individual becomes in the learning process. Triangle PQR has vertex coordinates at P(4, 0), Q(4, 3), R(5, 1). If the triangle is translated so that Q(4, 5), determine the translation direction and number of units. 8 units down 8 units up 8 units to the right 8 units to the left a road perpendicular to a highway leads to a farmhouse located 1 1 mile away. an automobile traveling on the highway passes through this intersection at a speed of 45mph. 45 mph . how fast is the distance between the automobile and the farmhouse increasing when the automobile is 9 9 miles past the intersection of the highway and the road? the distance between the automobile and the farmhouse is increasing at a rate of miles per hour. In order to study the cause and effect relationship between two variables, a researcher must perform what type of study ? A. correlationalB. descriptiveC. experimentalD. meta-analysisof study? question content areathomlin company forecasts that total factory overhead for the current year will be $15,500,000 with 250,000 total machine hours. year to date, the actual factory overhead is $16,000,000 and the actual machine hours are 330,000 hours. the predetermined factory overhead rate based on machine hours isa.$62 per machine hourb.$50 per machine hourc.$48 per machine hourd.$45 per machine hour Suppose you just purchased a 6 year. $1.000 par value bond. The coupon rate on this bond is 9% annually, with interest being paid semi-annually. If you expect to earn a 11% rate of return on this bond, how much did you pay for it? (Round your answer to two decimal point) the involvement of the united states in the international monetary fund and world bank was designed to . Jaden made a rectangular sign that is 1.4 meters long and 1.2 meters wide to post on the wall of his store. How many square meters of wall does the sign cover? The answer is 1.68, but to solve the problem, you need to find 1.4 x 1.2(which it is 1.68). Estimate the area of wall that the sign will cover. Explain your thinking please. Suppose you see a put option on the Swiss Franc (CHF) with a strike price of $1.065 and a premium of $0.014. If, at maturity, the exchange rate is $1.060/CHF, what is the profit from a put covering 20,000 CHF? 16-Write PromptPick a detail from this article. Explain how it helps you understand the bigger ideas in thearticle. Write out your answer.CP+A detail from the article "How to write an argumenative essay" that helps understand the biggerideas in the article is the supreme court over time has ruled that ap gov u3 readings 6th f18 julian rolled a normal 6-sided die 12 times. his rolls were as follows: 2, 4, 3, 3, 5, 1, 2, 6, 3, 1, 3, 5, 4. what is the probability that he will roll a 3 on the next roll? A company makes 110 bags. 32 of the bags have buttons but no zips. 28 of the bags have zips but no buttons. 24 of the bags have neither zips nor buttons. How many bags have zips on them? Please help with this one a sample of nobr was placed on a 1.00l flask containing no no or br 2 at equilibrium the flask contained when we see small changes in the demand for bottled water at several local sheetz convenience stores causing a very large change in demand for bottled water at the regional distribution center that serves those local stores, we are observing . group of answer choices quantity discounts. safety stock. the bullwhip effect. a bag contains 7 red balls, 9 blue balls, and 4 yellow balls. what is the minimum number of balls that must be selected to ensure that 4 balls of the same color are chosen? creates a zone of still water near the coastline is called?