Answers
Answer: because the hot water molecules are moving faster
Explanation: hot water=faster molecules= it spreads faster
Related Questions
Suggest some ways in which you might determine whether a particular water solution contains an acid or a base.
Answers
The use of the pH scale and litmus paper are the ways which can determine whether the solution is an acid or base.
How pH scale and litmus paper tell about acidic and basic solution?The pH scale is the way which determine the acidic or basic nature of a solution. If the pH of a solution is less than 7, it is considered as acidic. If the pH is 7, the solution is neutral and if the pH is greater than 7,the solution is basic.
While on the other hand, litmus paper also tells us about acidic and basic nature of solution. if the litmus paper turns red, it means the solution is acidic whereas if the litmus paper turns blue it means basic.
Learn more about acid here: https://brainly.com/question/25148363
What information does Gibbs free energy give about a reaction?
A. It tells how quickly the reaction will proceed to equilibrium.
B. It tells if the reaction will proceed spontaneously or not.
C. It tells what the most stable forms of the products are.
D. It tells what the activation energy of the forward reaction is.
Answers
Answer: b
Explanation:
In the following acid-base reaction,
HPO42- is the
H2PO4- (aq) + NH3(aq) → HPO42- (aq) + NH4+(aq)
А
B
С
acid
conjugate
acid
conjugate
base
Answers
Taking into account the Brønsted-Lowry acid-base theory, HPO₄⁻² is conjugate base of H₂PO₄⁻.
Brønsted-Lowry acid-base theoryThe Brønsted-Lowry acid-base theory (or the Brønsted-Lowry theory) identifies acids and bases based on whether the species accepts or donates protons or H⁺.
According to this theory, acids are proton donors while bases are proton acceptors.
So, reactions between acids and bases are H⁺ proton transfer reactions, causing the acid to form its conjugate base and the base to form its conjugated acid by exchanging a proton.
In other words, a conjugate base is an ion or molecule resulting from the acid that loses the proton, while a conjugate acid is an ion or molecule resulting from the base that gains the proton:
acid + base ⇄ conjugate base + conjugate acid
This caseIn this case, you know:
H₂PO₄⁻ + NH₃ → HPO₄⁻² + NH₄⁺
H₂PO₄⁻ behaves like acid because donates an H⁺ proton while NH₃ behaves like base because accepts an H⁺ proton from the acid.
So, NH₄⁺ is the conjugate acid of the NH₃ and HPO₄⁻² is conjugate base of H₂PO₄⁻.
In summary, HPO₄⁻² is conjugate base of H₂PO₄⁻.
Learn more about the Brønsted-Lowry acid-base theory:
brainly.com/question/12916250
brainly.com/question/1191429
brainly.com/question/4000152
brainly.com/question/12808135
#SPJ1
14. Calculate the mass in grams of oxygen required to react completly with 0.75 moles of Aluminum.
4Al + 302 → 2Al2O3
a. 32 g of Oxygen
b. 18 g of Oxygen
c. 16 g of Oxygen
d. 9.0 g of Oxygen
Answers
Moles of O_2:-
0.75(0.75)0.5625molMass of O_2:-
moles(Molar mass)0.5625(32)18gOption B
As per the given balanced reaction, 0.75 moles of aluminum metal requires 0.56 moles of oxygen gas for completely reaction. One mole of oxygen gas is 32 g. Then, mass of 0.56 moles is 18 g.
What is aluminum oxide ?Metals and metal like elements such as aluminum Al are more reactive towards atmospheric oxygen and forms their oxide layers in the metallic surface.
Al₂O₃ is an essential mineral of aluminum formed by the reaction with oxygen as given in the balanced chemical equation. As per this equation, 4 moles of Al requires 3 moles of oxygen for complete reaction.
The number of moles of oxygen required by 0.75 moles of Al is:
(0.75 × 3) /4 = 0.56 moles.
one mole of oxygen weighs 32 g/mol.
mass of 0.56 moles of O₂ = 32 × 0.56 = 18 g.
Therefore, the mass required by 0.75 moles of Al in the reaction is 18 g.
Find more on Al₂O₃:
https://brainly.com/question/15089294
#SPJ2
precipitate the reactants in achemical reaction. II. TRUE or FALSE. Write TRUE if the statement is correct and FALSE if it is not.
21. Sugar is very soluble in a nonpolar liquid like mineral oil.
22. Acetone has a higher vapour pressure than ethanol.
23. In a water molecule, the hydrogen is partially positive, while the oxygen is partially negative.
24. The stability of the DNA structure arises from the H-bonding of base pairs.
25. Components of electronic devices include nonpolar substanceslike transient suppression diodes, metalloids and semimetals.
26. Vapour pressure rises as the strength of IMFA decreases.
27. Boiling point, melting point, viscosity ang surface tension increases as the strength of IMFA decreases.
28. lon-dipole interaction exists between ions and a nonpolar compound. 29. Hydrogen bonding occurs with polar molecules bonded with highly- electronegative atoms.
30. Water is a polar molecule, thus it is miscible with nonpolarmolecule like oil.
Answers
Answer:
FalseTrueTrueFalseFalseTrueFalseTrueTrueTrueExplanation:
Sucrose is a polar carbohydrate. The negative and positive regions on the polar sucrose molecules are attracted by the polar water molecules, causing sucrose to dissolve in water. A polar substance like sucrose cannot be dissolved by a nonpolar substance like mineral oil.Because hydrogen bonding gives ethanol a stronger intermolecular force than acetone, ethanol has a higher boiling point than acetone. Because vapor pressure is proportional to boiling point in an indirect manner, acetone has a higher vapor pressure at 25° than ethanol.The Ostart text, O, end text atom hogs electrons and keeps them away from the Hstart text, H, end text atoms because oxygen is more electronegative (electron-hungry). This results in a partial negative charge on the oxygen end of the water molecule and a partial positive charge on the hydrogen end.The stability of DNA double-helical structures is aided by aromatic stacking and hydrogen bonding between nucleobases, which are two of the most important interactions. Hydrogen bonds are noncovalent interactions that are weak, yet the enormous number of hydrogen bonds between complementary base pairs in a DNA double helix combine to endow the structure with a lot of stability.'Boron, silicon, germanium, arsenic, antimony, and tellurium are metalloids. These elements resemble metals but do not conduct electricity as effectively as metals, making them semiconductors.The strength of a liquid's intermolecular forces determines its vapor pressure. The vapor pressure of a liquid with weak intermolecular interactions is higher. The vapor pressure of a liquid with higher intermolecular interactions is lower than that of a liquid with less intermolecular forces.The stronger the IMFs, the lower the vapor pressure of the substance and the higher the boiling point.When an ion interacts with a non-polar molecule, it causes an ion-induced dipole force. The charge of the ion produces a distortion of the electron cloud in the non-polar molecule, generating a brief partial charge, similar to a dipole-induced dipole force.water is a polar solvent and it will dissolve salts and other polar molecules, but not non-polar molecules like oil.how many CO grans are produced from 1.80 mol of sulfur dioxide2
Answers
Answer:
A mol (approximately)represents the number 6.02 X 10^^23. Mols become useful when we learn that, for any element on the periodic table, 6.02 X 10^^23 atoms of that element have a mass equal to the atomic mass in grams. So, on the periodic table carbon has an atomic mass of 12.011. That means: 12.011 grams of carbon is made up of 6.02 X 10^^23 atoms.
The above question is tricky.
If the question considers 1 molecule of SO2 as a particle, then the answer is 1.80 * 6.02 X 10^^23
If the question considers the S as one particle, and the O2 as 2 more particles, then the answer is: 3 * 1.8 * 6.02 X 10^^23.
Explanation:
hope it helps U
As soon as the rope breaks in picture 4, the car continues to roll forward on its own. This motion is BEST explained by which of the following laws? A. AN object in constant motion tends to remain in motion unless acted on by and unbalanced force. B. For every action there is an equal and opposite reaction/ C. An unbalanced force acting on an object will cause the object to accelerate. D. The force of gravity will cause an object to accelerate toward the earth at a constant rate.
Answers
Answer:
what is picture 4 you need to show it
If a Hh mom has an offspring with a hh dad, what is the probability that the offspring will have a dominant phenotype?
Question 2 options:
20%
10%
50%
40%
Answers
Answer:
I think 50%
Explanation:
im not really sure
What is radioactive dating in chemistry?
PLEASE HELP!!!
Answers
The general idea is that elements exist naturally as a combination of isotopes. Some isotopes are stable while others decay radioactively. The half-life of a radioactive isotope is the time required to reduce the initial quantity of the isotope by 50% through the process of radioactive decay.
Carbon 14 dating works this way. A tree growing in the past would have an equilibrium mixture of C-12 and C-14 atoms in proportions consistent with living matter today. We know this value.
When that tree dies, it no longer accumulates new carbon atoms from carbon dioxide in the atmosphere (through photosynthesis). At this point, the proportion of C-14 in the organic matter that was the tree decreases due to the decay of C-14 to an isotope of nitrogen.
When we dig up the remnants of the tree today, we can measure the proportion of C-14 to C-12 and see how much it has been reduced. From this we can calculate backwards using the half life of C-14 (5730 years) to estimate how old the remains of the tree are.
What is the mass in grams of 5.2 x 1028 atoms of manganese (Mn)?
Answers
The mass, in grams, of 5.2 x 10^28 atoms of manganese would be 0.0006833 grams
Mass calculationAccording to Avogadro, 1 mole of any substance contains 6.022 x [tex]10^{23}[/tex] atoms.
Thus, how many moles would be in 5.2 x [tex]10^{28}[/tex]atoms of Mn:
= 6.022 x [tex]10^{23}[/tex] /1 x 5.2 x [tex]10^{28}[/tex]
= 0.00001158 moles
Mass of 0.00001158 moles Mn = 0.00001158 x 54.9
= 0.0006833 grams
More on Avogadro's constant can be found here: https://brainly.com/question/21177668
Chromium reacts with bromine to produce chromium(iii) bromide
Answers
The balanced chemical equation for the reaction between chromium and bromine to produce chromium(III) bromide is:
2 Cr + 3 Br2 → 2 CrBr3
This equation shows that two chromium atoms react with three molecules of bromine to form two molecules of chromium(III) bromide.
What is a redox reaction?A redox reaction is a type of chemical reaction that involves the transfer of electrons between reactants. The term "redox" comes from the combination of two processes during the reaction: reduction, which involves the gain of electrons by a reactant, and oxidation, which involves the loss of electrons by a reactant.
Why is the above reaction an example of a redox reaction?The reaction is an example of a redox reaction, where reduction and oxidation occur simultaneously. Chromium is oxidized, while bromine is reduced. The reaction also shows the importance of balancing the number of atoms on both sides of the equation to ensure that the law of conservation of mass is satisfied.
To learn more about catalyst, visit here:
https://brainly.com/question/24430084
#SPJ1
Assume you added 40.0 mL of Vitamin C stock solution instead of 25.0 mL when preparing Solution. How would this affect the reaction rate?
Answers
The reaction rate is affected if the vitamin C is added in lower quantity due to lower amount of reactants.
What happen when the vitamin C is added in lower amount?If you added 40.0 mL of Vitamin C stock solution instead of 25.0 mL when preparing Solution, the reaction rate is affected because of the lower amount of reactant for the chemical reaction. If the reactants are present in larger amount then the products are also produced in large concentration.
So we can conclude that the reaction rate is affected if the vitamin C is added in lower quantity due to lower amount of reactants.
Learn more about reaction here: https://brainly.com/question/26018275
Suppose that a 10-mL sample of a solution is to be tested for I− ion by addition of 1 drop (0.2 mL) of 0.13 M Pb(NO3)2.
What is the minimum number of grams of I− that must be present in order for PbI2(s) ( Ksp=8.49×10−9 ) to form?
Answers
The minimum number of grams of I that must be present is ; 0.01836 * 10⁻³ mol
Given data :
Volume of solution to be tested for I-ion = 10 mL
Volume of Pb(NO₃)₂ = 0.2 mL
molarity of Pb(NO₃)₂ = 0.13 M
Determine the number of I that must be presentFirst step : calculate conc of PB²⁺ ions in the solution
conc of PB²⁺ ions = ( molarity of Pb(NO₃)₂ * volume of Pb(NO₃)₂ ) / ( total volume )
= ( 0.13 * 0.2 ) / ( 10 + 0.2 )
= ( 0.026 ) / ( 10.2 ) = 0.002549 M
Next step : determine the molarity of I
using the dissociation reaction of PbI₂
PbI₂(s) ---> Pb²⁺ (aq) + 2I (aq)
also; Ksp = [ Pb²⁺ ] [ I ]² ---- ( 1 )
From the question the given value of Ksp = 8.49 * 10⁻⁹
Therefore equation ( 1 ) becomes
8.49 * 10⁻⁹ = ( 0.002549 ) * [ I ]²
[ I ] = √ ( 8.49 * 10⁻⁹ ) / ( 0.002549 )
= 0.0018 M
Final step : Determine the minimum number of grams of I
moles of I = molarity of I * total volume
= 0.0018 M * 10.2 mL
= 0.01836 * 10⁻³ mol
Hence we can conclude that The minimum number of grams of I that must be present is ; 0.01836 * 10⁻³ mol
Learn more about Pb(NO₃)₂ : https://brainly.com/question/25071409
How many kJ of heat do you need to raise the temperature of 200 g of Aluminum from 80 °C to 100 °C?
Remember to convert your answer to kJ. Round your answer to two decimal places.
Answers
Answer:
0.01
Explanation:
100 -80=20
200/20=10/1000=0.01kj
How many moles of neon gas are there 25.0 L of gas or 5.0°C with a pressure of 89.9 KPa?
Answers
Now
[tex]\\ \rm\rightarrowtail PV=nRT[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{PV}{RT}[/tex]
[tex]\\ \rm\rightarrowtail n=\dfrac{89.9(25)}{5R}[/tex]
[tex]\\ \rm\rightarrowtail n=89.9(5)/R[/tex]
[tex]\\ \rm\rightarrowtail n=449.5/R mol[/tex]
Which property of water makes it effective in protecting firefighters?
Answers
Answer:
water has a high specific heat
Explanation:
this should work as an answer
Calculate the pH of a solution whose pOH is 11.
Answers
Answer:
3
Explanation:
pH + pOH = 14
pH + 11 = 14
pH = 3
socraticorgquestionshowdoyoucalculatethephofasolutionwhengiventheohconcentration
Anthony F BRIAN M
The weak ionization constant (Ka)
for H2CO3 is equal to:
A
B
(H2CO3]
[H+] [HCO3-)
[H+][HCO3-)
[H2CO3]
Answers
Carbonic acid is a weak acid. Its weak ionization constant (Ka) is equal to:
Ka = [H⁺] [HCO₃⁻] / [H₂CO₃]
What is a weak acid?A weak acid is an acid that dissociates partially in the water.
The equation for the acid dissociation of carbonic acid is:
H₂CO₃ ⇄ H⁺ + HCO₃⁻
The weak ionization constant (Ka) is the equilibrium constant for this reaction, that is, the product of the concentration of the products divided by the product of the concentrations of the reactants, all of them raised to their stoichiometric coefficients.
Ka = [H⁺] [HCO₃⁻] / [H₂CO₃]
Carbonic acid is a weak acid. Its weak ionization constant (Ka) is equal to:
Ka = [H⁺] [HCO₃⁻] / [H₂CO₃]
Learn more about weak acids here: https://brainly.com/question/15192126
What is The fmu (grams/mole) for disulfur hexachloride *the formula for it is S2Cl6*
Answers
Hexasulfur Dichloride
Name: Hexasulfur Dichloride
Formula: S2Cl6
Molar Mass:276.848
Example Reactions:
• S2Cl6 + 4H2O = 2SO2 + 6HCl + H2
Describe how distillation process makes water soft
Answers
Answer:
Distillation can be used to separate and collect a liquid from a solution. Distillation can also be used to soften water as the water evaporates as it is heated and the ions are left behind. Hard water can be softened by adding sodium carbonate (washing soda) or by passing the water through an ion-exchange column.
Explanation:
Calculate the normal concentration of a solution containing 20.8 g in 400 ml.
Answers
Answer:
52 g/L
Explanation:
First, 400 mL / 1000 = 0.4 L
20.8 g / 0.4 L = 52 g /L
To what temperature must a sample of helium gas be cooled from 139ºC to reduce its volume from 3.1 L to 0.71 L at constant pressure?
Answers
Answer:
To what temperature must a sample of helium gas be cooled from 22.2 degrees C to reduce its volume from 1.00L to 100cm3 ?
Explanation:
Calculate the (H3O+) for a solution whose pH is 6.79
Note: blank 1 should have three significant figures
The answer is: Blank 1 X 10^Blank 2
Answers
Answer:
Explanation:
alculate the (H3O+) for a solution whose pH is 6.79
Note: blank 1 should have three significant figures
The answer is: Blank 1 X 10^Blank 2
The pH of a solution is the negative logarithm of H₃O⁺ ion concentration.The concentration of H₃O⁺ ions in a solution with a pH of 6.79 is 1.6 × 10⁻⁷M.
What is pH ?pH of a solution is the measure of its acidity or basicity. Mathematically it is the negative logarithm of its H₃O⁺ ion concentration. A solution with a pH of 7 is neutral.
The solution with a pH below 7 is acidic and above 7 is basic. Thus, the higher H+ ion concentration, then the pH will be lower and more acidic the solution.
It is given that the pH of the solution is 6.79. The concentration of H₃O⁺ ions in the solution is calculated is calculated as follows:
pH = -log ( H₃O⁺)
6.79 = -log( H₃O⁺
[ H₃O⁺] = antilog (-6.79)
= 1.6 × 10⁻⁷M
Hence, the hydronium ion H₃O⁺ ion concentration of the solution of pH 6.79 is 1.6 × 10⁻⁷M.
To find more about pH, refer the link below:
https://brainly.com/question/491373
#SPJ2
energy contained in the
and
15. The energy transformation in a flashlight is from
battery to
energy in the circuit, to
energy released by the light bulb.
Answers
Answer:
yes of course is true the
How many grams of hydrogen will be produced from 4.0 moles of Magnesium?
Answers
Answer:
8 grams
Explanation:
trust
A person is going for a walk in the evening. To make sure that she can be seen walking when it gets dark, she wears a glow stick around her neck. The glow stick can be used as a light source when she bends the stick. Although the stick is sealed, bending the stick allows two chemicals to come in contact and react with each other. During the chemical reaction, light is given off by the glow stick.
When the reaction stops, light is no longer given off. What happens to the mass of the glow stick after the chemical reaction occurs? Explain citing evidence from the prompt and identify the scientific law that supports your explanation.
(give me claim,evidence,reasoning)
Answers
From the law of conservation of mass, the mass of the glow stick does not change after the reaction.
Law of conservation of massFrom the law of conservation of mass we know that mass can neither be created nor destroyed but is converted from one form to another. Since the mass of the system must remain unchanged, It then follows that the mass of the glow stick must remian the same.
Therefore, the mass of the glow stick does not change after the reaction following the law of conservation of mass.
Learn more about conservation of mass: https://brainly.com/question/13383562
How many moles of carbon are present in 1.50mole of aspirin , C_{9}*H_{8} * O_{4}
Answers
Given the molecular formula of aspirin, C₉H₈O₄, in 1.50 moles of aspirin there are 13.5 moles of carbon.
What is a mole?The mole is the SI base unit for the amount of matter. 1 mole of particles contains a number of Avogadro's particles.
We have 1.50 moles of aspirin, C₉H₈O₄. According to the molecular formula, the molar ratio of C₉H₈O₄ to C is 1:9.
1.50 mol C₉H₈O₄ × (9 mol C/1 mol C₉H₈O₄) = 13.5 mol C
Given the molecular formula of aspirin, C₉H₈O₄, in 1.50 moles of aspirin there are 13.5 moles of carbon.
Learn more about moles here: https://brainly.com/question/15374113
Which compound is an alcohol?
CH3Br
CH4
CH3COCH3
CH3CH2OH
Answers
Answer:
[tex]ch3ch2oh \: is \: alcohol \\ because \: it \: havve \: an \: oh \: grp \: \\ thank \: you[/tex]
the square below has anarea of 49ft2 what is the perimeter of the square
Answers
Answer:
28ft
Explanation:
if it's a square then each side is equal
the square root of 49 is 7
each side is 7 ft
7 ft times 4 sides is 28ft
what is safe storage of produced materials
Answers
Answer:
Stacking bags and bundles.
Explanation:
Interlock them in rows to ensure they're secure.
Answer:
Material Storage Facilities means an uncovered area used on a permanent basis for outside
Explanation:
Material Storage Facilities means an uncovered area where bulk materials (liquid, solid, granular, etc.) are stored in piles, barrels, tanks, bins, crates, or other means.
Additional Benchmarks for Federal, State, or Municipal Facilities with Incidental Solid De-Icing Material Storage Facilities monitoring under the requirements of subparagraph (D)(ii) above shall not be subject to Benchmark requirements for Chloride or Cyanide.
Directors are fully briefed on all business related matters, risk assessment and new initiatives proposed by the Company.