Plot points between and beyond each​ x-intercept and vertical asymptote. Find the value of the function at the given value of x.
​f(x)= 2/ x^2+3x-10

Answers

Answer 1

the points we plotted are (-6, -1/2), (-4, 1/2), (0, -1/5), (3, 1/2), and (6, 1/5).

What is function?

a function is a relationship or expression involving one or more variables.  It has a set of input and outputs.

To find the x-intercepts, we set the numerator of the function equal to zero:

[tex]2 / (x^2 + 3x - 10) = 0[/tex]

This is only true if the numerator is equal to zero, so:

2 = 0

This is not possible, so the function has no x-intercepts.

To find the vertical asymptotes, we look for values of x that make the denominator equal to zero:

[tex]x^2 + 3x - 10 = 0[/tex]

We can factor the quadratic as:

(x + 5)(x - 2) = 0

This means that the function has vertical asymptotes at x = -5 and x = 2.

Now, let's plot some points between and beyond each x-intercept and vertical asymptote:

When x = -6, f(x) = 2 / (-6)² + 3(-6) - 10 = -1/2

When x = -4, f(x) = 2 / (-4)² + 3(-4) - 10 = 1/2

When x = 0, f(x) = 2 / (0)² + 3(0) - 10 = -1/5

When x = 3, f(x) = 2 / (3)² + 3(3) - 10 = 1/2

When x = 4, f(x) = 2 / (4)² + 3(4) - 10 = -1/2

When x = 6, f(x) = 2 / (6)² + 3(6) - 10 = 1/5

Therefore, the points we plotted are (-6, -1/2), (-4, 1/2), (0, -1/5), (3, 1/2), and (6, 1/5).

To know more about function visit,

https://brainly.com/question/11624077

#SPJ1


Related Questions

Please help!! URGENT!! I don’t understand

Answers

Answer: 14%

Step-by-step explanation:

Our formula is i=prt but we're trying to find the rate (r) so we'll rearrange it to become r=i/pt.

i = $245

p = $7000

t = 3/12= 0.25 years

[tex]r=\frac{245}{(7000)(0.25)} \\r = 0.14[/tex]

question 1 options: as a quality control inspector: you have previously believed a claim that 3.2% of items made on your production line are defective. to see if you should still believe this claim: you decide to do a two-sided significance test, with a significance level of 2%. you then randomly sample 420 items from the production line, and find that 22 of the items are defective. in percentage form, and rounded to four digits past the decimal point: what is the approximate p-value of your test? answer: the approximate p-value of this test is % state your answer in percentage form. a percentage symbol is already provided. round your answer to four digits past the decimal point. include all four digits past the decimal point, even if some digits are zeros. include only your number for the answer. do not include any other information (such as another percentage symbol, or equal symbol, words, spaces, etc).

Answers

The approximate p-value is 5.1250%.

P-value is the probability of obtaining a test statistic as or more extreme than what was actually observed, given that the null hypothesis is true.

Two-sided significance test, with a significance level of 2%. you then randomly sample 420 items from the production line, and find that 22 of the items are defective.

The approximate p-value for this two-sided significance test, with a significance level of 2%, is 5.1250%.

This is the probability of observing 22 or more defective items given that the true rate is 3.2%.

This was calculated using a binomial test, which takes into account the sample size and the expected rate of defects.

This p-value indicates whether or not the observed rate of defects is significantly different from the expected rate.

In this case, the p-value is the probability of observing 22 or more defective items given that the true rate is 3.2%.

This can be calculated using a binomial test.

For similar question on p-value :

https://brainly.com/question/31591314

#SPJ11

A paper distributor offers discounts to individuals who buy in quantity. They offer a 10 percent discount for orders of 50 -100 boxes of paper, a 20 percent discount for orders of 100 - 200, and a 30 percent discount for orders of 200 boxes or more. If Lee placed an order of 140 boxes (each box is $2.50), what would his discount and final price be?

Answers

His discount and final price be $280 for his order of 140 boxes.

What is Discount ?

A discount is a drop in a product's or service's price.

It is frequently provided as a perk to customers to entice them to buy. Discounts are often stated as a percentage or dollar amount off the list price.

Depending on the sort of discount and the situation, discounts can be computed in a variety of ways.

For instance, a product that costs $100 would have a discounted price of $80 with a 20% discount applied. Similar to this, a product that costs $50 would have a discounted price of $40 if it received a $10 reduction.

In marketing and sales, discounts are frequently used to draw customers and boost sales volume.

What percentage is it?

The denominator of a percentage (also known as a ratio or fraction) is always 100. Sam, for instance, would have received 30 out of a possible 100 points if he had received 30% on his maths test.

In ratio form, it is expressed as 30:100 and in fraction form as 30/100. In this case, the percentage symbol "%" is read as "percent" or "percentage."

This percent symbol can always be changed to a fraction or decimal equivalent by using "divided by 100."

Exampe of Percentage :-

10% = 10/100 ( = 1/10 (or) 0.1)

25% = 25/100 ( = 1/4 (or) 0.25)

According to question

Lee qualifies for a 20% discount because his order of 140 boxes falls within the range of 100-200 boxes.

Since each box originally cost $2.50, the full price of 140 boxes, after any discounts, is:

140 * $2.50 = $350

The 20% Lee discount is determined as follows:

20% * $350 = $70

Lee's discount is therefore $70, and his adjusted price is as follows:

$350 - $70 = $280

Therefore, Lee will ultimately pay $280 for his order of 140 cartons.

To learn more about percentage visit:

https://brainly.com/question/28144353

#SPJ1

the major flaw of the linear probability model is that a. the actuals can only be 0 and 1, but the predicted are almost always different from that. b. the regression r2 cannot be used as a measure of fit. c. people do not always make clear-cut decisions. d. the predicted values can lie above 1 and below 0.

Answers

The major flaw of the linear probability model is, Option d, which allows predicted values to range from above 1 to below 0

The binary dependent variable, which accepts values of 0 and 1, and the independent variables are assumed to have a linear relationship under the linear probability model.

The anticipated values from the linear probability model, however, can range from 0 to 1, and in some circumstances, they can be either above or below 0. This goes against the dependent variable's probabilistic character and can produce inaccurate forecasts.

To know more about Linear probability, visit,

https://brainly.com/question/28013612

#SPJ4

anova with replication is also known as? repeated measures between-group design mixed design one-way anova

Answers

this is "Repeated measures ANOVA, which is a statistical test used to analyze data from experiments in which the same participants are measured multiple times under different conditions.

What is a repeated measures ANOVA ?

A repeated measures ANOVA is a statistical test used to analyze data from experiments in which the same participants are measured multiple times under different conditions. This design is sometimes referred to as a "within-subjects design" because each participant is measured within the same group.

Here are the steps for conducting a repeated measures ANOVA:

State the null and alternative hypotheses.Check the assumptions of the test, which include normality, sphericity, and homogeneity of variance.Calculate the within-subjects sum of squares (SSW), the between-subjects sum of squares (SSB), and the total sum of squares (SST).Calculate the degrees of freedom (df) for each of these sums of squares.Calculate the mean square (MS) for each source of variance by dividing the sum of squares by the degrees of freedom.Calculate the F ratio by dividing the between-subjects MS by the within-subjects MS.Determine the critical value for the F ratio using a table or software.Compare the calculated F ratio to the critical value. If the calculated F ratio is greater than the critical value, reject the null hypothesis and conclude that there is a significant effect of the independent variable on the dependent variable.If the null hypothesis is rejected, follow up with post hoc tests to determine which conditions differ significantly from each other.

Learn more about  ANOVA

brainly.com/question/24157862

#SPJ11

math help i beg anything will do just pleas help

Answers

Answer: 1. 48.356 2. 75.3982236862

Step-by-step explanation:

Radias*2 pi

Can someone help me fast with this please!?!?!

If s(d) represents the number of songs downloaded in a year d, what is the interpretation of s(2020) = 5,220,000.
A. 5,220,000 songs were downloaded in the year 2020.
B. There is not enough information to interpret the information.
C. In the year 2020 $5,220,000 was earned from downloaded songs.
D. 2,020 songs were downloaded at a cost of $5,220,000.

Answers

the correct answer is A.

5,220,000 songs were downloaded in the year 2020.

If s(d) represents the number of songs downloaded in a year d, what is the interpretation of s(2020) = 5,220,000?

The interpretation of s(2020) = 5,220,000 is "5,220,000 songs were downloaded in the year 2020".

Therefore, the correct answer is A. 5,220,000 songs were downloaded in the year 2020.

Interpretation refers to the process of explaining or giving meaning to information, data, or phenomena. It involves analyzing and making sense of information to draw conclusions or make decisions based on the findings.

Interpretation can involve subjective judgment and may depend on the perspective, assumptions, or biases of the interpreter.

to know more about interpretation

brainly.com/question/30932003

#SPJ1

need help! please give example if can

Answers

The two statements are;

The area of sector 1 is  20n² + 15n square meters

The total distance around the garden is 20n + 2 meters

Option A  and C

How to determine the value

The formula for the area of a rectangle is expressed as;

A = lw

Such that the parameters are;

A is the area of the rectangle l is the length of the rectanglew is the width of the rectangle

For the first sector, we have that;

Length = 4n + 3

Width = 6n - 2 - 5n = n - 2

Substitute the values

Area of sector 1 = (4n + 3)(5n)

expand the expression

Area of sector 1 = 20n² + 15n square meters

Area for the sector 2

Area = (3n - 3)(n -2)

expand the bracket

Area = 3n² - 6n - 3n + 6 = 3n² - 9n + 6

Learn more about rectangles at: https://brainly.com/question/25292087

#SPJ1

Find the measures of angle a and B. Round to the nearest degree.

Answers

The measure of angle A and angle B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.

What is trigonometric ratios?

The trigonometric ratios is concerned with the relationship of an angle of a right-angled triangle to ratios of two side lengths.

The basic trigonometric ratios includes;

sine, cosine and tangent.

tan B = 6/11 {opposite/adjacent}

B= tan⁻¹(6/11) {cross multiplication}

B = 28.6105.

tan A = 11/6 {opposite/adjacent}

A= tan⁻¹(11/6) {cross multiplication}

A = 61.3895.

Therefore, the measure of angles A and B are 28.61 and 61.39 rounded to two decimal place, using trigonometric ratio of tangent for the respective angles.

Read more about trigonometric ratios here: https://brainly.com/question/11967894

#SPJ1

a student willing to participate in a debate competition is required to fill out a registration form. answers to the follow questions on the form are what type of data?

Answers

A student willing to participate in a debate competition is required to fill out a registration form.

Form filling in two types of data i.e.,

Quantitative dataCategorical data

Quantitative data :

Quantitative data is data that can be counted or measured in numerical values. The two main types of quantitative data are discrete data and continuous data. Height in feet, age in years, and weight in pounds are examples of quantitative data. Qualitative data is descriptive data that is not expressed numerically.

Categorical data:

Categorical data is a collection of information that is divided into groups. i.e., if an organization or agency is trying to get a biodata of its employees, the resulting data is referred to as categorical.

a. What is your date of birth?

Quantitative.

b. Have you participated in any debate competition previously?

Categorical.

c. If yes, how many debate competitions have you participated so far?

Quantitative.

d. Have you won any of the competitions?

Categorical.

e. If yes, how many have you won?

Quantitative.

Learn more about Quantitative data at:

https://brainly.com/question/14810759

#SPJ4

The given question is incomplete, complete question is:

A student willing to participate in a debate competition required to fill a registration form. State

whether each of the following information about the participant provides categorical or quantitative

data.

a. What is your date of birth?

b. Have you participated in any debate competition previously?

c. If yes, how many debate competitions have you participated so far?

d. Have you won any of the competitions?

e. If yes, how many have you won?

Please write answer in two parts. A. Main answer (correctly paraphrased, addressing all aspect of the question) B. Explanation (Step-by-step explanation)

thompson and thompson is a steel bolts manufacturing company. their current steel bolts have a mean diameter of 137 millimeters, and a variance of 49 . if a random sample of 48 steel bolts is selected, what is the probability that the sample mean would differ from the population mean by greater than 3 millimeters? round your answer to four decimal places.

Answers

The probability that the sample mean would differ from the population mean by greater than 3 millimetres is 0.0033 + 0.0033 = 0.0066, rounded to four decimal places.

We are given that the population mean diameter of the steel bolts manufactured by Thompson and Thompson is μ = 137 millimeters and the variance is = 49.

We need to find the probability that the sample mean would differ from the population mean by greater than 3 millimeters.

The standard deviation of the sample means is given by the formula:

[tex]\sigma_{\bar{x}} = \frac{\sigma}{{\sqrt{n}}}[/tex]

Substituting the given values, we have:

[tex]\sigma \bar{x}=\frac{\sqrt{49}}{\sqrt{48}}=1.118[/tex]

To find the probability that the sample mean would differ from the population mean by greater than 3 millimeters,

we need to calculate the z-score:

[tex]z=\frac{(\bar{x}-\mu)}{ \sigma _{\bar{x}}}[/tex]

Substituting the given values, we have:

[tex]z=\frac{\bar{x}-137}{1.118}[/tex]

We want to find the probability that |z| > 3/1.118 = 2.683.

Using a standard normal distribution table, we find that the probability of z > 2.683 is 0.0033.

Since this is a two-tailed test, the probability of z < -2.683 is also 0.0033.

For more questions on standard normal distribution table

https://brainly.com/question/1846009

#SPJ11

what other patterns can you discover in the subway ridership dataset using calculations with multiple operators?

Answers

Subway ridership data can reveal useful patterns through calculations with multiple operators, informing decisions about infrastructure and scheduling to better serve riders' needs.

Why Subway ridership data reveal useful patterns through calculations?

The subway ridership dataset can reveal a wealth of information through calculations with multiple operators. One such calculation is the average increase or decrease in ridership during specific time intervals. By comparing ridership during peak and off-peak hours or weekdays versus weekends, it is possible to determine when the subway system is busiest and when it is underutilized.

Another useful calculation is the average percentage change in ridership between different stations or subway lines. This can help identify the most popular stations or lines and can inform decisions about where to allocate resources and infrastructure improvements.

Additionally, it is possible to explore the correlation between ridership and other factors such as weather, events, or holidays. By analyzing how ridership fluctuates in response to external factors, transportation planners can adjust schedules and routes to better serve the needs of riders.

Calculations with multiple operators can also reveal patterns in ridership based on time of year or day of the week. By analyzing the average change in ridership on different days or months, transportation planners can make informed decisions about scheduling and staffing.

Finally, regression analysis can be used to identify the overall trend in ridership over time. By examining long-term ridership trends, transportation planners can identify areas for improvement and plan for future infrastructure projects to better meet the needs of subway riders.

Learn more about Calculation

brainly.com/question/30151794

#SPJ11

Our school raises $150 for six charities. Each charity gets 1/6 of the amount raised. How much did each charity get

Answers

The amount that each charity gets is $25.

The charity raise simply define as we raise funds in the form of small amounts of money from a huge crowd of people within a specific period of time.

For example, if 100 people donate $50 each to your crowdfunding campaign in two weeks, you will be able to raise $5000.

To find the amount that each charity got, we have to divide the total charity amount raised in the proportion given, i.e., 1/6.

Each charity gets 1/6 of the total amount raised, which is $150.

So, we need to divide $150 by 6:

$150 ÷ 6 = $25

Therefore, each charity received $25.

To know more about charity

https://brainly.com/question/30667130

#SPJ4

Help me pls........................

Answers

All the possible angle measures are given as follows:

25º and 35º.

What are the trigonometric ratios?

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

Sine of angle = length of opposite side to the angle divided by the length of the hypotenuse.Cosine of angle = length of adjacent side to the angle divided by the length of the hypotenuse.Tangent of angle = length of opposite side to the angle divided by the length of the adjacent side to the angle.

On the first quadrant, we have that:

The cosine is greater than the sine for angles that are less than 45º.The cosine is equals to the sine for an angle of 45º.The cosine is less than the sine for angles that are greater than 45º.

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

Juan can run 38 yards in 5 seconds. If he keeps the same pace, how many yards can he run in 30 seconds? Responses

Answers

Answer: 228 yards

Step-by-step explanation:

Answer:

228

Step-by-step explanation:

find the volume of a cylinder with a diameter of 22 yd and a height of 7 yd

Answers

V=π(d

2)2h=π·(20.12

2)2·6.4≈2034.42618m

explain why we call the national halothane study an observational study rather than an experiment, even though it compared the results of using different anesthetics in actual surgery.in order to be an experiment, the subjects would have to be randomly selected from the population. however, these are hospital patients who all have some disease or condition and have not been randomly selected from the population, which includes both healthy and sick people.in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. instead, a patient's anesthetic is selected by his or her doctor(s).there is not enough information to say for sure, but it is safer to assume that it is only an observational study, so that we are not overconfident about the results.actually, it is an experiment and not an observational study.

Answers

We the best reason behind why we call National halothane study is an observational study rather than an experiment is: " In order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned." So, option( b) is right one.

We have data from the National Halothane Study that correlates with important research into the safety of anesthetics used in surgery. The above shows the death rate and aesthetic. There is a relationship between the anesthetic used and the death of the patient. The data was collected after that the anesthesia was administered is started. In the observational study, interesting observer in the subjects & any treatment that the subjects recive are beyond the council of the investigators. Here the motion of anaesthesia is anesthetics used her determined by the doctors and the investigators are simply observing. So, it is an observational study due to because in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. Instead, a patient's anesthetic is selected by his or her doctor(s).

For more information about observational study, visit :

https://brainly.com/question/14393640

#SPJ4

Complete question:

The National Halothane Study was a major investigation of the safety of anesthetics used in surgery. Records of over 850,000 operations performed in 34 major hospitals showed the following death rates for four common anesthetics:27 Anesthetic A Death rate B CD 1.7% 1.7% 3.4% 1.9% There is a clear association between the anesthetic used and the death rate of patients. Anesthetic C appears dangerous.

a) in order to be an experiment, the subjects would have to be randomly selected from the population. however, these are hospital patients who all have some disease or condition and have not been randomly selected from the population, which includes both healthy and sick people.

b) in order to be an experiment, the treatments (choice of anesthetic) would have to be randomly assigned. instead, a patient's anesthetic is selected by his or her doctor(s).

c) there is not enough information to say for sure, but it is safer to assume that it is only an observational study, so that we are not overconfident about the results.

d) actually, it is an experiment and not an observational study.

Divide. Write the missing
numbers.
62) 5,472
1
9
16
R
62 5 4 7 2
"
R
9
1 6
(Type whole numbers.)

Answers

we get the quotient as 161 and remainder as 11.So the missing numbers are:R = 11

9, 1, 6

What is long division method ?

First divide the greater number by the smallest number and then divide the smaller number by the remainder. We continue the process until we get 0 remainder. The divisor is the HCF of the given numbers.

To divide 5,472 by a two-digit number, we can use long division method as follows:

34) 5 4 7 2( 34

   -    4 0

     ______

       1 4 7

  -    1 3 6

      _______

            1 1

Therefore, we get the quotient as 161 and remainder as 11.

So the missing numbers are:

R = 11

9, 1, 6

Learn more about HCF here

https://brainly.com/question/29114178

#SPJ1

Help solve this! ASAP

Answers

Answer:

  2

Step-by-step explanation:

You want the average rate of change of f(x) = -x² -2x +6 on the interval [-7, 3].

Average rate of change

The average rate of change of f(x) on the interval [a, b] is computed as ...

  m = (f(b) -f(a))/(b -a)

For the given function f(x), this is ...

  m = (f(3) -f(-7))/(3 -(-7)) = (-9 -(-29))/10 = 20/10 = 2

The average rate of change of f(x) on the interval [-7, 3] is 2.

__

Additional comment

The derivative of the function is f'(x) = -2x -2. The midpoint of the interval is x = (-7 +3)/2 = -2. The value of the derivative at the midpoint is equal to the average rate of change on the interval:

  -2(-2) -2 = 4 -2 = 2 . . . . average slope between x=-7 and x=3.

<95141404393>

A small tree that is 8 feet tall casts a 4-foot shadow, while a building that is 24 feet tall casts a shadow in the same direction. Determine the length of the building's shadow.

6 feet
12 feet
18 feet
48 feet

Answers

Answer:

Using similar triangles, we can set up a proportion:

(tree height)/(tree shadow) = (building height)/(building shadow)

Plugging in the given values, we get:

8/4 = 24/x

Solving for x, we get:

x = (24 x 4)/8 = 12 feet

Therefore, the length of the building's shadow is B. 12 feet.

Mr. Yara has 200 acres of land available to plant for three types of fruit trees (lemon, peach and

cherry). Based on the market survey, lemon has a selling price of $2 per kg; peach has a selling

price of $1. 5 per kg and cherry has a selling price of $4 per kg. The average yield per acre for

lemon, peach and cherry is 4, 6 and 2 tonne, respectively. The fertilizer requires per acre for

lemon, peach and cherry is 100, 100 and 50 kg, respectively. An acre of lemon and cherry

requires 10 labour hours each whereas an acre of peach requires 12 labour hours. Maximum

availability of labour is 20,000 hours. The cost of fertilizer is $2 per kg and the cost of labour is

$40 per hour. What is the optimal allocation of acre to the three types of fruit trees?

[1 tonne = 1000kg]


(a) Formulate a linear programming model to maximize the profit.


(b) Find the optimal solution by using simplex algorithm.

Answers

(a) The linear programming model to maximize the profit is written as,

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

(b) The optimal solution is x1 = 0, x2 = 8/3, x3 = 8, x4 = 0, and the maximum profit is $40.

(a) Linear programming model:

Let x1, x2, and x3 be the number of acres allocated to lemon, peach, and cherry trees, respectively. Then, the objective function we want to maximize is:

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

The first term represents the revenue from selling lemons, the second term represents the revenue from selling peaches, the third term represents the revenue from selling cherries, the fourth term represents the cost of fertilizer, and the last term represents the cost of labor.

The constraints are:

x1 + x2 + x3 ≤ 200 (total available land)

10x1 + 12x2 + 10x3 ≤ 20000 (total available labor hours)

x1, x2, x3 ≥ 0 (non-negativity constraints)

(b) Simplex algorithm:

Convert the linear programming model into standard form by introducing slack variables and expressing all variables in terms of these variables.

Maximize Z = 2(4x1)(100) + 1.5(6x2)(100) + 4(2x3)(1000) - 2(100x1 + 100x2 + 50x3) - 40(10x1 + 12x2)

Subject to:

x1 + x2 + x3 + x4 = 200

10x1 + 12x2 + 10x3 + x5 = 20000

x1, x2, x3, x4, x5 ≥ 0

In this case, the entering variable is x1, as it has the highest coefficient in the objective function.

Step 5 (continued):

1.6 0.1 0 1 -48 32 <- Z

0.4 0.9 1 1/10 0 40 <- x1

8.4 3.3 0 -1/10 1 1840 <- x5

The entering variable is x3, as it has the highest coefficient in the objective function.

The leaving variable is x1, as it has the smallest ratio of RHS to its coefficient in the x3 column.

x2 x1/12 x3 x5/120 x4 RHS

2.5 1/5 0 -1/60 0 40 <- Z

0.5 -1/5 1 1/60 0 8 <- x3

0.5 2/15 0 1/60 1/10 8/3 <- x2

To know more about linear programming model here

https://brainly.com/question/28036767

#SPJ4

The function V(t) = 30000(0.85) value V(t) represents the values v(t) of Nancy's car after t years. What is the depreciation rate of Nancy's car?​

Answers

The depreciation rate of Nancy is 15%.

What is known by depreciation?

Depreciation is the reduction in the value of an asset over time due to wear and tear, obsolescence, or other factors. It is a non-cash expense that is recorded on a company's income statement, which reflects the decrease in the asset's value during its useful life. Depreciation is commonly used in accounting to allocate the cost of an asset over its useful life, and it helps businesses to accurately reflect the true value of their assets on their financial statements.

Define function?

In mathematics, a function is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output.

The given function V(t) = [tex](30000*0.85)^{t}[/tex]represents the value of Nancy's car after t years.

Depreciation rate is the rate at which the value of an asset decreases over time. In this case, the depreciation rate of Nancy's car is 1 - 0.85 = 0.15 or 15%.

Learn more about depreciation here:

https://brainly.com/question/17827672

#SPJ1

HELP ME PLS
1. If the diameter of a circle is segment AB where Point A is located at (-3, 6), and Point B located at (-8,-1), what is the diameter of the circle?

2√2
√146
√74
74

Answers

The diameter of the circle is √74. Answer: C.

What is circle?

A circle is a geometric shape that consists of all points in a plane that are equidistant from a fixed point called the center. It can also be defined as the set of points that are a fixed distance (called the radius) away from the center point.

To find the diameter of the circle, we need to find the distance between points A and B, which will give us the length of the diameter.

Using the distance formula, we have:

d = √[(x2 - x1)² + (y2 - y1)²]

where (x1, y1) = (-3, 6) and (x2, y2) = (-8, -1).

Plugging in the values, we get:

d = √[(-8 - (-3))² + (-1 - 6)²]

= √[(-5)² + (-7)²]

= √[25 + 49]

= √74

Therefore, the diameter of the circle is √74. Answer: C.

To learn more about circle from the given link:

https://brainly.com/question/29142813

#SPJ1

The​ life, in​ years, of a certain type of electrical switch has an exponential distribution with an average life betaequals3. If 300 of these switches are installed in different​ systems, what is the probability that at most 70 fail during the first​ year?

Answers

The probability that at most 70 switches fail during the first year is low, at around 1.3%.

The problem involves the use of the exponential distribution to model the lifetime of a certain type of electrical switch. Specifically, we are given that the average life of these switches is beta = 3.

The exponential distribution is often used to model the time between occurrences of a certain event, such as the failure of a component. In this case, we can use it to model the time between failures of the electrical switches.

To answer the question, we need to find the probability that at most 70 switches fail during the first year. Let X be the number of switches that fail during the first year. We know that X follows a Poisson distribution with parameter lambda = (1/3)*300 = 100.

This is because the expected number of failures per year for each switch is 1/3 (since the average life is 3 years), and there are 300 switches installed.

Therefore, we can use the Poisson distribution to calculate the probability that at most 70 switches fail during the first year:

P(X <= 70) = e^(-100) * (100^0/0!) + e^(-100) * (100^1/1!) + ... + e^(-100) * (100^70/70!)

This can be calculated using a calculator or software such as Excel. The answer is approximately 0.013, or 1.3%. This suggests that the switches are fairly reliable, and that it is unlikely that a large number of them will fail in a short period of time.

To learn more about distribution click on,

https://brainly.com/question/13747500

#SPJ4

Noah is visiting his aunt in Texas. He wants to buy a belt buckle whose price is $25. He knows that the sales tax in Texas is 6.25%.
How much will the tax be on the belt buckle?

Answers

The tax on the belt buckle is $1.56

What is Rate?

In general terms, a rate is a measure of the relationship between two quantities that are measured in different units. A rate expresses how much of one thing there is per unit of another thing. For example, miles per hour is a rate that expresses how many miles are traveled in one hour.

To calculate the tax on the belt buckle, we need to multiply the price of the belt buckle by the sales tax rate:

Tax = Price x Tax rate

In this case, the price of the belt buckle is $25 and the sales tax rate is 6.25%. To convert the tax rate from a percentage to a decimal, we need to divide it by 100:

Tax rate = 6.25% ÷ 100 = 0.0625

Now we can calculate the tax on the belt buckle:

Tax = Price x Tax rate

= $25 x 0.0625

= $1.56

Therefore, the tax on the belt buckle is $1.56. The total cost of the belt buckle including tax would be $25 + $1.56 = $26.56.

To learn more about Rate visit the link:

https://brainly.com/question/119866

#SPJ1

Urgent, please help!

Answers

It has been proved that the lines MN and PR are parallel because they have the same slope.

How to identify the slope of parallel lines?

We are given the coordinates of the points P, Q and R as:

P(-3, -6)

Q(1, 4)

R(5, -2)

Since M is the midpoint of PQ, we have:

M = (-3 + 1)/2, (-6 + 4)/2

M = (-1, -1)

N is the midpoint of QR and so:

N = (1 + 5)/2, (4 - 2)/2

N = (3, 1)

Slope of MN = (1 + 1)/(3 + 1) = 1/2

Slope of PR = (-2 + 6)/(5 + 3)

Slope of QR = 4/8 = 1/2

Both slopes are equal and as such they are parallel lines

Read more about parallel lines at: https://brainly.com/question/29056723

#SPJ1

assume the mapping t w p2 ! p2 defined by t a0 c a1t c a2t 2 d 2 a0 c .3 a1 c 4 a2/t c .5 a0 6 a2/t 2 is linear. find the matrix representation of t relative to the basis b d f1; t; t 2 g.

Answers

So, the matrix representation of T relative to the basis B = {f1, t, t²} is:
| 2.5  3  0 |
|  0   4  0 |
|  0   0  6 |

To find the matrix representation of the linear transformation T relative to the basis B = {f1, t, t²}, we need to apply T to each element of the basis and then express the result as a linear combination of the basis elements.
Let's apply T to each element of the basis B:
1. T(f1) = T(1) = 2(1) + 0.5(1) = 2.5
2. T(t) = T(c) = 3(c) + 4(c²) = 3f1 + 4t
3. T(t²) = T(c²) = 6(c²) = 6t²
Now, we can express the results as linear combinations of the basis elements:
1. T(f1) = 2.5f1 + 0t + 0t²
2. T(t) = 3f1 + 4t + 0t²
3. T(t²) = 0f1 + 0t + 6t²
Finally, we can form the matrix representation of T relative to the basis B by using the coefficients of the linear combinations as the columns of the matrix:
T matrix = | 2.5  3  0 |
                  |  0   4  0 |
                  |  0   0  6 |

Learn more about linear combinations here:

https://brainly.com/question/8502289

#SPJ11

The matrix representation of t with respect to the basis b = [tex]{f1, t, t^2}[/tex] is:

[1/2   -4/3      1 ]

[1       8/3      0 ]

[0     -5/2   3/2 ].

To find the matrix representation of the linear transformation t with respect to the given basis, we need to apply t to each of the basis vectors and represent the result as a linear combination of the basis vectors.

The coefficients of these linear combinations will form the columns of the matrix representation.

First, we apply t to each of the basis vectors:

[tex]t(1) = a0 + a1t + a2t^2 = a0 + a1f1 + a2t - (a1/2)f1 - (3a2/2)t^2[/tex]

[tex]t(t) = a0 + (4/3)a1t + (5/6)a2/t = a0 + (4/3)t + (5/6)t^2 - (4/3)f1 - (5/2)t^2[/tex]

[tex]t(t^2) = a0 + (3/2)a2/t^3 = a0 + (3/2)t^2 - (3/2)f1[/tex]

Next, we represent these results as linear combinations of the basis vectors:

[tex]t(1) = (a0 - a1/2)f1 + (a1 + a2)t - (3a2/2)t^2[/tex]

[tex]= 1f1 + 0t + 0t^2 + (-1/2)f1 + 1t + 0t^2 + 0f1 - (3/2)t^2[/tex]

[tex]= (1/2)f1 + 1t - (3/2)t^2[/tex]

[tex]t(t) = (-4/3)f1 + (a0 + 4/3)t + (5/6)t^2[/tex]

[tex]= 0f1 + 1t + 0t^2 + (-4/3)f1 + (4/3)t + (5/6)t^2 + 0f1 + 0t - (5/2)t^2[/tex]

[tex]= (-4/3)f1 + (8/3)t - (5/2)t^2[/tex]

[tex]t(t^2) = f1 + (a0 - 3/2)t^2[/tex]

[tex]= 0f1 + 0t + 1t^2 + 1f1 + 0t + 0t^2 + 0f1 + (1/2)t^2[/tex]

[tex]= 1f1 + 0t + (3/2)t^2[/tex]

For similar question on matrix.

https://brainly.com/question/2456804

#SPJ11

help please its due in a few minuets

Answers

Answer:

use desmos graphing calculator it helps alot

Step-by-step explanation:

x^{2}-x-6=0 has two zeros/solutions

x^{2}-x-6=0 has 1 zero/solution

x^{2}-x-6=0 has no zero/solution

Can someone help me asap? It’s due tomorrow.

Answers

Answer:

I would say convenience sampling. It's hard to tell. Sampling every other person is like systematic sampling, BUT convenience sampling would be to sample people that are easy to reach.

In Circle C, the diameter AB bisects the chord EF.
If m

Answers

In the circle the mesaure of ∠ACF is  7

What do you mean by Diameter ?

The distance from the centre of a circle to any point on the boundary is called the radius. The radius is half of the diameter; 2r=d 2 r = d . The line segment that joins two points on the circle is a chord.

If diameter of a circle bisects a chord ,then it must be perpendicular to the chord.

∴ m∠ACF = 90°  

(8x + 34)° = 90°

8x = 90 - 34

x = 56/8

x = 7

Hence,mesaure of ∠ACF = 7

Complete question : In Circle C, the diameter AB bisects the chord EF.

If m∠ACF = (8x+34)°, enter in the correct value of x.

Learn more about Chord here

https://brainly.com/question/21686011

#SPJ1

Other Questions
How long did Lizzie practice on Thursday and Friday altogether?JPDLizzie's Drum PracticePSPDPSSMonday Tuesday Wednesday Thursday Friday= 5 minutesDONE0minutes7 840051 20963 In triangle ABC, m according to the endosymbiotic theory, how did memrbane-bound organeles, such as the nucleus and endoplasmic reticulum form? In an extant prokaryotic cell, the outer boundary of life is the capsule. True or False? Triangle UVW has vertices at U(2, 0), V(3, 1), W(3, 3). Determine the vertices of image UVW if the preimage is rotated 90 counterclockwise.A: U(0, 2), V(1, 3), W(3, 3)B:U(0, 2), V(1, 3), W(3, 3)C:U(2, 0), V(3, 1), W(3, 3)D: U(2, 0), V(3, 0), W(3, 3) harry has externalizing problems and often interrupts other children when they are playing. according to the text, the best approach for correcting harry's behavior is to looking at the ascii contents of file1.nc, can you tell that the rijndael-256 algorithm was used to encrypt the file Sequencing Copy the organizerbelow. Use it to place into sequencethe important events in the recordof British imperialism in North andEast Africa I need answer for this question. It's urgentplease.The following table presents closing prices of June 2022 CHF futures contract for three days in March 2022. Each contract requires the delivery of CHF 125,000. The initial and maintenance margin per c ontract are $2,500, and $2,000, respectively. Date 3/01 3/02 3/03 h June 2022 CHF Futures $0.5350 $0.5375 $0.5315 Contract Based on prices during the three-day period, which one of the following statements is true. If you sold CHF futures contracts on 3/01, then on 3/02 you would have made a profit O If you bought CHF futures contracts on 3/01, then on 3/02 you would have made a loss O If you sold CHF futures contracts on 3/02, then on 3/03 you would have made a profit O If you bought CHF futures contracts on 3/02, then on 3/03 you would have made a profit why would antimicrobials that have toxic side effects be used at all? (select the best reason) What contrasts does source 7 draw China and Europe during the process of forwarding traffic, what will the router do immediately after matching the destination ip address to a network on a directly connected routing table entry? the battles of trenton and princeton in late 1776 and early 1777 __________. where is the mitochondria located A. in the ectoplasm B. in the nucleus C. outside the cell A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:f(d) = 7(1.06)dPart A: When the biologist concluded her study, the radius of the algae was approximately 13.29 mm. What is a reasonable domain to plot the growth function? (4 points)Part B: What does the y-intercept of the graph of the function f(d) represent? (2 points)Part C: What is the average rate of change of the function f(d) from d = 4 to d = 11, and what does it represent? (4 points) An animal population N(t) is modeled by the differential equation:dN/dt = -0. 001N(N - 110)(N - 99). If N(0)=A, where A is a positive integer, what is the maximum value of the positive integer A such that extinction will occur? The following two payment options each has a present value of X. (i)140 at the end of each year, forever, with the first payment due at t = 1. (ii)A payment of 1971.24 at t = 10, followed by 140 at the end of each year, forever, with the first payment of 140 due at t = 11. Find X. a.1.740.54 b.1.854.05 c.1.778.38 d.1.891.89 e.1.816.22 a projecting part of a building (especially a church), usually semicircular and topped by a half-dome or vault. what happens if an assembly instruction starts from the first column? additionally, is it possible to write two assembly instructions on one line? Would you expect the reactivity of a five-membered ring ether such as tetrahydrofuran (Table 10.2) to be more similar to the reactivity of an epoxide or to the reactivity of a noncyclic ether? tetrahydrofuran THF O epoxide O noncyclic ether