Rewrite the expression 2(10+12) using the distributive property of multiplication over addition

The option that would result in the smallest margin of error in estimating the mean salt content, u, is 95% confidence, n = 50. The correct answer is Option D.

The margin of error is the amount by which a statistic is expected to differ from the true value of the population parameter. The interval estimate is calculated with the help of a margin of error. The margin of error and the interval estimate are inversely related to each other. If we want a small margin of error, we must increase the sample size.

The confidence level is the likelihood that a population parameter will fall within a specified range of values. The confidence level is determined by the sample size and margin of error. The sample size and margin of error are directly related to each other. When the sample size is smaller, the margin of error is larger. When the sample size is larger, the margin of error is smaller.

The margin of error is the highest at a confidence level of 50%. In general, as the confidence level increases, the margin of error decreases, and vice versa. As the sample size increases, the margin of error decreases. It follows that a 95% confidence level, n = 50 would yield the smallest margin of error in estimating the mean salt content, u. Hence, option D) 95% confidence, n = 50 would result in the smallest margin of error in estimating the mean salt content, u.

Learn more about margin of error here: https://brainly.com/question/29328438

#SPJ11

As the length of the side immediately across from the angle, choice (c) 6 units is the correct answer.

Three straight lines that cross at three different locations create the two-dimensional geometric outline of a triangle. A triangle's vertices, which are the three places at which those three lines intersect, are referred to as the triangle's sides. The dimensions of a triangle's edges and angles can be used to classify it. For instance, an isosceles triangle has two equal sides and two equal angles while an equilateral triangle has three equal sides and three equal angles of 60 degrees. An angle or side of a scalene triangle cannot be equivalent.

given

The right-angled triangle XYZ in the provided illustration has a side length of 6 units and an angle opposite to it that is labelled as 30°. The extent of the side YZ, denoted as x, must be determined.

To find x, we can use the trigonometric sine relation. The length of the side directly across from the angle divided by the length of the hypotenuse is known as the sine of an angle. The hypotenuse in this instance is designated as 2x.

As a result, we have:

sin 30° = (6/2x)

Adding two times to both sides:

2x * sin 30° = 6

Using sin 30°, which has a value of 0.5:

x = (6/(2 * 0.5)) = 6/1 = 6

Consequently, the side YZ is 6 units long.

As the length of the side immediately across from the angle, choice (c) 6 units is the correct answer.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

Answer:

-0.2

Step-by-step explanation:

[tex]\frac{y2-y1}{x2-x1}[/tex]

^This here is how I calculated the slope^

Y2=4

Y1= 2

4-2= 2

X2=-7

x1=3

-7-3=-10

2/-10

or -2/10

The probability that exactly 8 of the 19 people in the random sample are employed is 27.93%.

We need to calculate the probability that exactly 8 of the 19 people in the random sample are employed. The probability of a single person being employed is 4%, or 0.04.

To calculate the probability of 8 people being employed out of the 19, we can use the binomial distribution formula:

P(X=8) = nCx * (p^x) * (1-p)^(n-x) Where n = 19, x = 8, p = 0.04, and 1-p = 0.96

So, P(X=8) = 19C8 * (0.04^8) * (0.96^11) = 0.2793 or 27.93%.

Therefore, the probability that exactly 8 of the 19 people in the random sample are employed is 27.93%.

For more such questions on Probability.

https://brainly.com/question/11234923#

#SPJ11

The 4 in the hundredths place has a smaller value than the 4 in the tens place.

In the decimal number system, each digit to the left of the decimal point represents a power of 10, starting with 10^0 = 1 for the rightmost digit. Each digit to the right of the decimal point represents a negative power of 10, with the place value decreasing as you move farther to the right.

In the number 240.149, the 4 in the tens place represents 4 x 10 = 40. The 4 in the hundredth place represents 4/100 or 0.04, which is smaller than 40. Therefore, the 4 in the tens place has a greater value than the 4 in the hundredths place.

Hence, the value of a digit in a decimal number depends on its position relative to the decimal point. Digits to the left of the decimal point represent whole numbers, while digits to the right of the decimal point represent fractions or parts of a whole.


To know more about the decimal number system, refer here:

https://brainly.com/question/30477589#

#SPJ11

The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:

σ = sqrt((p*(1-p))/n)

where n is the sample size.

Substituting the values given in the question, we have:

σ = sqrt((0.5*(1-0.5))/555) = 0.0258

To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:

P(|p_hat - p| < 0.05)

where p_hat is the sample proportion.

We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:

P(|p_hat - p|/σ < 0.05/σ)

P(-0.97 < Z < 0.97)

where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:

P(-0.97 < Z < 0.97) = 0.8327

Rounding to four decimal places, we have:

P(|p_hat - p| < 0.05) = 0.8327

Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

The probability of selecting two non-defective DVD players from a group of six is 2/5. This is based on the assumption that the selection is done without replacement.

We can use the formula for calculating probabilities of combinations:

P(not defective) = number of ways to choose 2 non-defective DVD players / total number of ways to choose 2 DVD players

Total number of ways to choose 2 DVD players out of 6 is:

C(6,2) = 6! / ([2!] [4!]) = 15

Number of ways to choose 2 non-defective DVD players out of 4 is:

C(4,2) = 4! / ([2!] [2!]) = 6

Therefore, the probability that Cecil chooses 2 non-defective DVD players is:

P(not defective) = 6/15 = 2/5

So the value of P(not defective) is 2/5.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

The probability that 10 or more of 15 marketing personnel are extroverts is 0.719.

Since 80% of all marketing personnel are extroverts, the probability of any single marketing personnel being an extrovert is 0.8. The probability that 10 or more marketing personnel at the party of 15 are extroverts can be calculated using the Binomial Distribution formula:

P(X>=10) = 1 - [P(X=0) + P(X=1) + P(X=2) + P(X=3) + P(X=4) + P(X=5) + P(X=6) + P(X=7) + P(X=8) + P(X=9)]

P(X>=10) = 1 - [15C0*0.80*0.215 + 15C1*0.81*0.214 + 15C2*0.82*0.213 + 15C3*0.83*0.212 + 15C4*0.84*0.211 + 15C5*0.85*0.210 + 15C6*0.86*0.29 + 15C7*0.87*0.28 + 15C8*0.88*0.27 + 15C9*0.89*0.26]

P(X>=10) = 0.719

Therefore, 0.79 is the probability that 10 or more of the 15 marketing personnel at the party are extroverts.

To know more about probability refer here:

https://brainly.com/question/1596693#

#SPJ11

Answer:29160

Step-by-step explanation:

The bottom of the ladder is moving at a rate of 4/3 ft per second.

To solve the problem, we can use the Pythagorean Theorem:[tex]$x^2 + y^2 = 64$[/tex], where x is the distance from the wall to the bottom of the ladder and y is the length of the ladder. We differentiate this equation with respect to time t and use the chain rule to get [tex]$\frac{d}{dt} (x^2 + y^2) = \frac{d}{dt} 64$[/tex]

Simplifying, we get

[tex]$2x \frac{dx}{dt} + 2y \frac{dy}{dt} = 0$[/tex]

When the bottom of the ladder is 4 feet from the wall, we have x = 4 and y = 8, so we can substitute these values into our equation and solve for [tex]$\frac{dx}{dt}$[/tex]:

[tex]$2(4)\frac{dx}{dt} + 2(8)(-2) = 0$[/tex]

[tex]$\frac{dx}{dt} = \frac{16}{8} = \frac{4}{3}$[/tex]

Therefore, the bottom of the ladder is moving at a rate of [tex]$\frac{4}{3}$[/tex] ft/s.

Learn more about Time:

https://brainly.com/question/11733843
#SPJ4

The transformation that would not result in a congruent figure when performed on triangle RST is A. A dilation by a scale factor of 2 with respect to point R.

The equation that has the same solution as the system of equations is C. 4x + 9y = 10

4x + 6y = 24.

Transformations that change the shape or size of a figure can change its congruency.  A dilation is a transformation that changes the size of a figure so this would mean that RST dilated would not result in a congruent figure.

When the system of equations, 4x + 9y = 10, 2x + 3y = 12 is solved, we find that x = 13 and y = - 14/ 3.

Options A,B, and D cannot have the same value because the numbers are the same and so they should have different values., Only option C can be the same and when the values are slotted in, this is proven.

Option C, 4x + 9y = 10 , 4x + 6y = 24 is therefore correct.

Find out more on equations at https://brainly.com/question/25869125

#SPJ1

The conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. Generally, insurance companies use the number of traffic violations and/or the number of claims a driver has had within a certain time period as indicators of their riskiness.

As Eric has had no accidents or traffic violations, the probability that he is a high-risk driver is very low. However, this does not mean that the probability is zero. There are many other factors which can contribute to a driver's risk, such as age, gender, experience, and location.

If Eric is an experienced driver, who has been driving for many years with no traffic accidents, then the probability of him being a high-risk driver will be lower than the average driver. On the other hand, if Eric is a new driver, or is located in an area with a high rate of traffic accidents, then the probability of him being a high-risk driver may be higher than the average driver.

Overall, the conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. However, this probability can change depending on other factors, such as his age, experience, and location.

See more about conditional probability at: https://brainly.com/question/23382435

#SPJ11

There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.

We are given the boundary-value problem:

y" + 16y = 0, y(0) = 1, y(L) = 1

The characteristic equation is r^2 + 16 = 0, which has roots r = ±4i.

The general solution to the differential equation is then y(x) = c1cos(4x) + c2sin(4x).

Using the boundary conditions, we get:

y(0) = c1 = 1

y(L) = c1cos(4L) + c2sin(4L) = 1

Substituting c1 = 1 into the second equation, we get:

cos(4L) + c2*sin(4L) = 1

Solving for c2, we get:

c2 = (1 - cos(4L))/sin(4L)

Thus, the general solution to the differential equation that satisfies the given boundary conditions is:

y(x) = cos(4x) + (1 - cos(4L))/sin(4L)*sin(4x)

Now, we can answer the questions:

(a) To have precisely one nontrivial solution, we need the coefficients c1 and c2 to be uniquely determined. From the above expression for c2, we see that this is only possible if sin(4L) is nonzero. Thus, if sin(4L) ≠ 0, there exists precisely one nontrivial solution.

(b) If sin(4L) = 0, then c2 is undefined and we have a family of solutions that differ by a constant multiple of sin(4x). Hence, there are infinitely many solutions.

(c) There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.

To learn more about nontrivial solution visit: https://brainly.com/question/30452276

#SPJ11

The sum of the first 50 terms is 3775. Let a be the first term and d be the common difference of the arithmetic sequence.

Then, the tenth term is a + 9d = 28, and the sum of the fifth and seventh terms is 2a + 12d = 32.

Solving these equations simultaneously, we get a = 2 and d = 3.

To find the sum of the first 50 terms, we use the formula for the sum of an arithmetic sequence:

S50 = (50/2)(2a + (50-1)d) = 25(2 + 49(3)) = 3775.

Find out more about arithmetic sequence

brainly.com/question/15412619

#SPJ4

There are 5²⁵ possible ways to select 25 cans of soda from 5 types, while there are [5¹⁸] (25 choose 7) possible ways to select 25 cans with at least 7 Dr. Peppers, and only [3²²] (25 choose 3) possible ways to select 25 cans with only 3 Dr. Peppers available.

(a) Since there are five types of soda and we are selecting 25 cans, we can choose any type of soda for each can. Therefore, the number of ways to select 25 cans of soda is 5²⁵.

(b) If we must include at least seven Dr. Peppers, then we can choose the remaining 18 cans from any of the five types of soda (including Dr. Pepper). We can choose 7 Dr. Peppers in (25 choose 7) ways. Therefore, the number of ways to select 25 cans of soda with at least seven Dr. Peppers is (25 choose 7) [5¹⁸].

(c) If there are only three Dr. Peppers available, then we must choose all three Dr. Peppers and select the remaining 22 cans from the four types of soda (excluding Dr. Pepper). We can choose the remaining 22 cans in 4²² ways. Therefore, the number of ways to select 25 cans of soda with only three Dr. Peppers available is 3 [4²²].

Learn more about Combinatorics here: brainly.com/question/13261685

#SPJ4

Complete question:

From an unlimited selection of five types of soda, one of which is Dr. Pepper, you are putting 25 cans on a table.

(a) Determine the number of ways you can select 25 cans of soda.

(b) Determine the number of ways you can select 25 cans of soda if you must include at least seven Dr. Peppers.

(c) Determine the number of ways you can select 25 cans of soda if it turns out there are only three Dr. Peppers available.

The third term of a sequence is 14. Term to term rule is square, then subtract 11. The first term of the sequence is 6.

The given information is about the third term of a sequence which is 14, and the term to term rule is square, then subtract 11.

We have to find the first term of the sequence. The sequence can be calculated using the following formula:

An = A1 + (n-1)d

Where, An is the nth term of the sequence A1 is the first term of the sequence d is the common difference between the terms of the sequence. Let's solve the problem by finding the value of the common difference between the terms of the sequence.

Using the given information, we can write: A3 = 14=> A1 + (3 - 1)d = 14=> A1 + 2d = 14 ----- (i)

Also, the term to term rule is square, then subtract 11.So, we can write, A2 = A1 + d = (A1)² - 11 ---- (ii)

Substituting the value of d from equation (ii) in equation (i),

we get: A1 + 2 [(A1)² - 11] = 14 Simplifying this equation, we get: A1² - 2A1 - 12 = 0 On solving this quadratic equation

we get: A1 = -2 or A1 = 6 Ignoring the negative value of A1, we get the first term of the sequence to be 6.

for such more question on sequence

https://brainly.com/question/7882626

#SPJ11

The measure of angle R in ΔSRT which is drawn inside the circle is 77.5°.

Circle is a two-dimensional shape that is defined as the set of all points that are equidistant from a central point. It is often represented as a round shape with a curved boundary.

Since SR is a diameter of the circle, it follows that angle STR is a right angle (90°). Therefore, we can find the measure of angle SRT using the following equation:

∠SRT + ∠STR = 180°

(2x-23°) + 90° = 180°

2x + 67° = 180°

2x = 180° - 67°

2x = 113°

x = 56.5°

∠TRS = 5x-97°

∠TRS = 5(56.5°)-97°

∠TRS = 192.5°

Finally, we can find the measure of angle SRT:

∠SRT = 180° - ∠STR - ∠TRS

∠SRT = 180° - 90° - 192.5°

∠SRT = -102.5°

Therefore, to find the measure of angle R, we need to add 180° to angle SRT:

∠R = ∠SRT + 180°

∠R = -102.5° + 180°

∠R = 77.5°

To know more about angle visit:

https://brainly.com/question/13483158

#SPJ1

Coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. The side chains of the tetraalkylammonium are modified with the ethylene glycol ether, which is a highly polar solvent, allowing for better solubility in nonaqueous electrolyte solutions. Additionally, the ethylene glycol ether has the ability to modify the stability of the ionic species, preventing aggregation and ensuring the longevity of the battery. This increases the redox capacity and enhances the performance of the flow battery.

The ethylene glycol ether-tetraalkylammonium coupling has been proven to be an effective method for improving the solubility and stability of anthraquinone-based ionic species. For example, it has been observed that the coupling of ethylene glycol ether to anthraquinone-based ionic species enhanced the current density of the battery by more than 3 times. Furthermore, the coupling process has also been found to improve the energy efficiency and storage capacity of the nonaqueous redox flow battery.

Overall, coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method for enabling highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. This process has been proven to improve the performance of the battery, including current density, energy efficiency, and storage capacity.

for such more questions on solubility

https://brainly.com/question/23946616

#SPJ11

The new length of the rectangle is approximately 2.29 units. We use the formula for the area of a rectangle to solve for the new length, given the new width.

If the width and length of a rectangle are 3 and 8, respectively, and the width is increased to 10.5, we can calculate the new length of the rectangle using the formula for the area of a rectangle, which is length multiplied by width.

The original area of the rectangle is 3 x 8 = 24 square units. If we increase the width to 10.5, the new area of the rectangle becomes: 10.5 x length = 24 Solving for the length, we get: length = 24/10.5 = 2.29 (rounded to two decimal places)

It's important to note that changing one dimension of a rectangle can affect the other dimension, especially if we want to maintain the same area.

Learn more about rectangle here:

https://brainly.com/question/27722891

#SPJ4

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

1) We know that there is a total of 24 hours in a day.

therefore, 7/8 hours of Wednesday =

number of hours in a day = 24

number of hours every Wednesday = 7/8

= 7/8 x 24 hours

= 7 x 3 hours

= 21 hours

7/8 hours every Wednesday means 21 hours every Wednesday.  

2) We know that there are a total of 24 hours in a day;

therefore, 3/8 hours of Friday =

number of hours in a day = 24

number of hours every Friday = 3/8

= 3/8 x 24 hours

= 3 x 3 hours

= 9 hours

3/8 hours every Friday means 9 hours every Friday.

therefore, the total number of hours = 21 + 9 = 30

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

To learn more about sum, click here:

brainly.com/question/29034036

#SPJ4

One advantage of best-guess experiments is that they are often faster and more cost-effective than factorial or design experiments.

Best-guess (trial and error) experiments involve making a hypothesis and testing it through a series of trials until a satisfactory result is achieved. On the other hand, factorial or design experiments involve manipulating multiple variables simultaneously to determine their individual and interactive effects on a response variable.

Both approaches have their advantages and disadvantages depending on the specific research question and goals. They may also be useful in situations where there is limited knowledge about the variables of interest or when the system is too complex to be modeled accurately.

However, best-guess experiments may suffer from issues such as biased or subjective interpretation of results, a lack of control over extraneous variables, and a potential for false positives or negatives.

In contrast, factorial or design experiments provide a more systematic approach to testing hypotheses and offer greater control over variables, leading to more reliable and generalizable results. They may, however, be more time-consuming and expensive to conduct.

Ultimately, the choice between best-guess and factorial or design experiments depends on the research question, available resources, and desired level of precision and control.

To learn more about experiment click on,

https://brainly.com/question/30455826

#SPJ4

Answer:

8;-2

Step-by-step explanation:

8 is the x axis and -2 is the y axis

Answer:

Step-by-step explanation:

Answer:

The answer should be 20,365.714 but I am not sure

Step-by-step explanation:

A minimum score of 88.95 is required to receive an "A" grade on the exam.

To determine the minimum score required to receive an "A" grade on an exam, we must first understand the meaning of standard deviation and mean. The mean is the average of a set of values, whereas the standard deviation is a measure of how far apart the values are from the mean. The minimum score required to receive an "A" grade is determined by calculating the z-score that corresponds to the top 12.3 percent of exam scores.

The formula for calculating the z-score is given as: z = (x - μ)/σ, where x is the raw score, μ is the population mean, and σ is the population standard deviation. Solving for z, we have: z = invNorm(1 - 0.123) = invNorm(0.877) ≈ 1.15. The inverse normal distribution function is used to determine the value of z that corresponds to the area to the right of the z-score. We can then use the formula for the z-score to solve for the raw score (x):
x = zσ + μ
Substituting the values we have, we get:
x = 1.15(17) + 68 ≈ 88.95
Therefore, a minimum score of 88.95 is required to receive an "A" grade in the exam.

To know more about mean click here:

https://brainly.com/question/30112112

#SPJ11

See Below

HAVE A NICE DAY !

The equation of the line of reflection that reflects shape P into shape Q is y = −2x + 12.

To find the equation of the line of reflection that reflects shape P into shape Q, we need to follow some steps:

Step 1: Draw the mirror line. To reflect a point or shape, we must have a mirror line. The mirror line is the line that passes through the reflection and is perpendicular to the reflecting surface. It serves as a reference for reflecting points or shapes.

Step 2: Find the midpoint of PQ. The midpoint of PQ is the point that lies exactly halfway between P and Q.

Step 3: Find the slope of PQ. The slope of PQ is the rise over run or the difference of the y-coordinates over the difference of the x-coordinates.

The slope formula is given by m = (y2 − y1) / (x2 − x1).

Step 4: Find the perpendicular slope of PQ. The perpendicular slope of PQ is the negative reciprocal of the slope of PQ. It is given by m⊥ = −1/m.

Step 5: Write the equation of the line of reflection. The equation of the line of reflection is given by y − y1 = m⊥(x − x1) or y = m⊥x + b, where m⊥ is the perpendicular slope of PQ and b is the y-intercept of the line. To find b, we substitute the coordinates of the midpoint of PQ into the equation and solve for b. Then we substitute m⊥ and b into the equation to get the final answer.

for such more question on reflection

https://brainly.com/question/26642069

#SPJ11

Answer:

Step-by-step explanation:

a. 100 divided by 75 = 1.3333333333333333333333333333333

1.3333333333333333333333333333333 times 43 = 57.333333333333333333333333333332

round it to the nearest whole number: ≅ 57%

Answer:

£164.50

Step-by-step explanation:

If the discount is 6%, then the discounted price is 94% of the original price.

95% of £175 = 0.94 × £175 = £164.50

The quadratic function that only has one root at 3 and passes through the point (0,4) is: f(x) = (4/9)(x - 3)^2

A quadratic equation is a polynomial equation of degree 2, meaning that the highest exponent of the variable is 2. It has the general form:

ax^2 + bx + c = 0

If a quadratic function has only one root at 3, then it must be of the form:

f(x) = a(x - 3)^2

where a is a constant. This is because a quadratic function with only one root must have a double root, meaning that the parabola only touches the x-axis at that point and does not cross it. And a quadratic function with vertex at (3,0) and opening upwards satisfies this condition.

To determine the value of a, we can use any additional information that may be provided, such as the value of the function at another point. For example, if we know that f(0) = 4, then we can substitute these values into the equation to get:

4 = a(0 - 3)^2

4 = 9a

a = 4/9

To know more about quadratic function visit:

https://brainly.com/question/30929439

#SPJ1

The quadratic function that has only one root at 3 and passes through (0,4) is: [tex]f(x)=(\frac{4}{9} )(x-3)^{2}[/tex]

A quadratic equation is a second-degree algebraic problem in x. In its standard form, the quadratic equation is [tex]ax^2+bx+c=0[/tex], where an as well as b are the coefficients, x is the variable, and c is the value of the constant component. The essential requirement for a formula to be a quadratic equation is that the coefficient of [tex]x^2[/tex] is not zero (a 0). When writing an equation with quadratic equations in conventional format, the [tex]x^2[/tex] term comes first, then the x term, and lastly the constant term.

A quadratic equation is a polynomial expression of degree 2, which means that the variable's greatest exponent is 2. It takes the following basic form:

[tex]ax^2+bx+c=0[/tex]

If the quadratic function has only one root at 3, it must have the following form:

[tex]f(x)=a(x-3)^2[/tex]

This requirement is satisfied by a quadratic function with a vertex at (3,0) and an opening upwards.

We know that f(0) = 4, so we can plug these numbers into the equation to get:

[tex]4=a(0-3)^2[/tex]

simplify the above equation

4 = 9a

The value is,

a = 4/9

To know more about quadratic function, visit:

https://brainly.com/question/1214333

#SPJ1

To make 2 gallons of a 20% salt solution, combine 0.86 gallons of the 12% salt solution and 1.14 gallons of the 26% salt solution.

Let x be the amount of the 12% salt solution needed in gallons, and y be the amount of the 26% salt solution needed in gallons to make 2 gallons of a 20% salt solution.

Based on the provided data, we can construct the following system of two equations:

X + y = 2 (total volume of the mixture is 2 gallons)

0.12x + 0.26y = 0.2(2) (total salt content of the mixture is 20% of 2 gallons)

Simplifying the second equation, we get:

0.12x + 0.26y = 0.4

Multiplying the first equation by 0.12 and subtracting it from the second equation, we get:

0.14y = 0.16

Y = 1.14

Substituting y = 1.14 into the first equation, we get:

X + 1.14 = 2

X = 0.86

In order to create 2 gallons of a 20% salt solution, 0.86 gallons of the 12% salt solution and 1.14 gallons of the 26% salt solution must be combined.

The complete question is:-

How much of a 12% salt solution must combined with a 26% salt solution to make 2 gallons of a 20% salt solution?

To learn more about solution, refer:-

https://brainly.com/question/30665317

#SPJ4